summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: Avoid receiving packets with an l3mdev on unbound UDP socketsRobert Shearman
Packets arriving in a VRF currently are delivered to UDP sockets that aren't bound to any interface. TCP defaults to not delivering packets arriving in a VRF to unbound sockets. IP route lookup and socket transmit both assume that unbound means using the default table and UDP applications that haven't been changed to be aware of VRFs may not function correctly in this case since they may not be able to handle overlapping IP address ranges, or be able to send packets back to the original sender if required. So add a sysctl, udp_l3mdev_accept, to control this behaviour with it being analgous to the existing tcp_l3mdev_accept, namely to allow a process to have a VRF-global listen socket. Have this default to off as this is the behaviour that users will expect, given that there is no explicit mechanism to set unmodified VRF-unaware application into a default VRF. Signed-off-by: Robert Shearman <rshearma@brocade.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30Merge branch 'net-dsa-bcm_sf2-CFP-support'David S. Miller
Florian Fainelli says: ==================== net: dsa: bcm_sf2: CFP support This patch series adds support for the Broadcom Compact Field Processor (CFP) which is a classification and matching engine built into most Broadcom switches. We support that using ethtool::rxnfc because it allows all known uses cases from the users I support to work, and more importantly, it allows the selection of a target rule index, which is later used by e.g: offloading hardware, this is an essential feature that I could not find being supported with cls_* for instance. Thanks! Changes in v3: - rebased against latest net-next/master after Vivien's changes Changes in v2: - fixed modular builds reported by kbuild test robot ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: bcm_sf2: Add support for ethtool::rxnfcFlorian Fainelli
Add support for configuring classification rules using the ethtool::rxnfc API. This is useful to program the switch's CFP/TCAM to redirect specific packets to specific ports/queues for instance. For now, we allow any kind of IPv4 5-tuple matching. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: bcm_sf2: Add CFP registers definitionsFlorian Fainelli
Add Compact Field Processor definitions for the Broadcom Starfighter 2 and compatible versions of the switch. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: bcm_sf2: Configure traffic classes to queue mappingFlorian Fainelli
By default, all traffic goes to queue 0, re-configure the traffic classes to quality of service mapping such that priority X maps to queue X, where X is from 0 through 7. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: Hook {get,set}_rxnfc ethtool operationsFlorian Fainelli
In preparation for adding support for CFP/TCAMP in the bcm_sf2 driver add the plumbing to call into driver specific {get,set}_rxnfc operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_pageArseny Solokha
In spite of switching to paged allocation of Rx buffers, the driver still called dma_unmap_single() in the Rx queues tear-down path. The DMA region unmapping code in free_skb_rx_queue() basically predates the introduction of paged allocation to the driver. While being refactored, it apparently hasn't reflected the change in the DMA API usage by its counterpart gfar_new_page(). As a result, setting an interface to the DOWN state now yields the following: # ip link set eth2 down fsl-gianfar ffe24000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001ecd0000] [size=40] ------------[ cut here ]------------ WARNING: CPU: 1 PID: 189 at lib/dma-debug.c:1123 check_unmap+0x8e0/0xa28 CPU: 1 PID: 189 Comm: ip Tainted: G O 4.9.5 #1 task: dee73400 task.stack: dede2000 NIP: c02101e8 LR: c02101e8 CTR: c0260d74 REGS: dede3bb0 TRAP: 0700 Tainted: G O (4.9.5) MSR: 00021000 <CE,ME> CR: 28002222 XER: 00000000 GPR00: c02101e8 dede3c60 dee73400 000000b6 dfbd033c dfbd36c4 1f622000 dede2000 GPR08: 00000007 c05b1634 1f622000 00000000 22002484 100a9904 00000000 00000000 GPR16: 00000000 db4c849c 00000002 db4c8480 00000001 df142240 db4c84bc 00000000 GPR24: c0706148 c0700000 00029000 c07552e8 c07323b4 dede3cb8 c07605e0 db535540 NIP [c02101e8] check_unmap+0x8e0/0xa28 LR [c02101e8] check_unmap+0x8e0/0xa28 Call Trace: [dede3c60] [c02101e8] check_unmap+0x8e0/0xa28 (unreliable) [dede3cb0] [c02103b8] debug_dma_unmap_page+0x88/0x9c [dede3d30] [c02dffbc] free_skb_resources+0x2c4/0x404 [dede3d80] [c02e39b4] gfar_close+0x24/0xc8 [dede3da0] [c0361550] __dev_close_many+0xa0/0xf8 [dede3dd0] [c03616f0] __dev_close+0x2c/0x4c [dede3df0] [c036b1b8] __dev_change_flags+0xa0/0x174 [dede3e10] [c036b2ac] dev_change_flags+0x20/0x60 [dede3e30] [c03e130c] devinet_ioctl+0x540/0x824 [dede3e90] [c0347dcc] sock_ioctl+0x134/0x298 [dede3eb0] [c0111814] do_vfs_ioctl+0xac/0x854 [dede3f20] [c0111ffc] SyS_ioctl+0x40/0x74 [dede3f40] [c000f290] ret_from_syscall+0x0/0x3c --- interrupt: c01 at 0xff45da0 LR = 0xff45cd0 Instruction dump: 811d001c 7c66482e 813d0020 9061000c 807f000c 5463103a 7cc6182e 3c60c052 386309ac 90c10008 4cc63182 4826b845 <0fe00000> 4bfffa60 3c80c052 388402c4 ---[ end trace 695ae6d7ac1d0c47 ]--- Mapped at: [<c02e22a8>] gfar_alloc_rx_buffs+0x178/0x248 [<c02e3ef0>] startup_gfar+0x368/0x570 [<c036aeb4>] __dev_open+0xdc/0x150 [<c036b1b8>] __dev_change_flags+0xa0/0x174 [<c036b2ac>] dev_change_flags+0x20/0x60 Even though the issue was discovered in 4.9 kernel, the code in question is identical in the current net and net-next trees. Fixes: 75354148ce69 ("gianfar: Add paged allocation and Rx S/G") Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: ethtool: add support for 2500BaseT and 5000BaseT link modesPavel Belous
This patch introduce support for 2500BaseT and 5000BaseT link modes. These modes are included in the new IEEE 802.3bz standard. Signed-off-by: Pavel Belous <pavel.s.belous@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handlerAlexander Stein
According to VLI64 Intel Atom E3800 Specification Update (#329901) concurrent read accesses may result in returning 0xffffffff and write accesses may be dropped silently. To workaround all accesses must be protected by locks. Cc: stable@vger.kernel.org Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: baytrail: Debounce register is one per communityAndy Shevchenko
Debounce value is set globally per community. Otherwise user will easily get a kernel crash when they start using the feature: BUG: unable to handle kernel paging request at ffffc900003be000 IP: byt_gpio_dbg_show+0xa9/0x430 Make it clear in byt_gpio_reg(). Note that this fix just prevents kernel to crash, but doesn't make any difference to the existing logic. It means the last caller will win the trade and debounce value will be configured accordingly. The actual logic fix needs to be thought about and it's not as important as crash fix. That's why the latter goes separately and right now. Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration") Cc: Cristina Ciocan <cristina.ciocan@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: baytrail: Rectify debounce support (part 2)Andy Shevchenko
The commit 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") almost fixes the logic of debuonce but missed couple of things, i.e. typo in mask when disabling debounce and lack of enabling it back. This patch addresses above issues. Reported-by: Jean Delvare <jdelvare@suse.de> Fixes: 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30irqdomain: Avoid activating interrupts more than onceMarc Zyngier
Since commit f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early"), we can end-up activating a PCI/MSI twice (once at allocation time, and once at startup time). This is normally of no consequences, except that there is some HW out there that may misbehave if activate is used more than once (the GICv3 ITS, for example, uses the activate callback to issue the MAPVI command, and the architecture spec says that "If there is an existing mapping for the EventID-DeviceID combination, behavior is UNPREDICTABLE"). While this could be worked around in each individual driver, it may make more sense to tackle the issue at the core level. In order to avoid getting in that situation, let's have a per-interrupt flag to remember if we have already activated that interrupt or not. Fixes: f3b0946d629c ("genirq/msi: Make sure PCI MSIs are activated early") Reported-and-tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1484668848-24361-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-01-30[media] cec: fix wrong last_la determinationHans Verkuil
Due to an incorrect condition the last_la used for the initial attempt at claiming a logical address could be wrong. The last_la wasn't converted to a mask when ANDing with type2mask, so that test was broken. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30[media] cec-intro.rst: mention the v4l-utils package and CEC utilitiesHans Verkuil
Mention where to find the CEC utilities. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30[media] cec rst: remove "This API is not yet finalized" noticeHans Verkuil
The API is now finalized, so this notice should be dropped. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-30ARM: 8643/3: arm/ptrace: Preserve previous registers for short regset writeDave Martin
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Cc: <stable@vger.kernel.org> # 3.0.x- Fixes: 5be6f62b0059 ("ARM: 6883/1: ptrace: Migrate to regsets framework") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2017-01-30ARM: 8642/1: LPAE: catch pending imprecise abort on unmaskAlexander Sverdlin
Asynchronous external abort is coded differently in DFSR with LPAE enabled. Fixes: 9254970c "ARM: 8447/1: catch pending imprecise abort on unmask". Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2017-01-30perf/core: Fix PERF_RECORD_MMAP2 prot/flags for anonymous memoryPeter Zijlstra
Andres reported that MMAP2 records for anonymous memory always have their protection field 0. Turns out, someone daft put the prot/flags generation code in the file branch, leaving them unset for anonymous memory. Reported-by: Andres Freund <andres@anarazel.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Don Zickus <dzickus@redhat.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@kernel.org Cc: anton@ozlabs.org Cc: namhyung@kernel.org Cc: stable@vger.kernel.org # v3.16+ Fixes: f972eb63b100 ("perf: Pass protection and flags bits through mmap2 interface") Link: http://lkml.kernel.org/r/20170126221508.GF6536@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-30perf/core: Fix use-after-free bugPeter Zijlstra
Dmitry reported a KASAN use-after-free on event->group_leader. It turns out there's a hole in perf_remove_from_context() due to event_function_call() not calling its function when the task associated with the event is already dead. In this case the event will have been detached from the task, but the grouping will have been retained, such that group operations might still work properly while there are live child events etc. This does however mean that we can miss a perf_group_detach() call when the group decomposes, this in turn can then lead to use-after-free. Fix it by explicitly doing the group detach if its still required. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # v4.5+ Cc: syzkaller <syzkaller@googlegroups.com> Fixes: 63b6da39bb38 ("perf: Fix perf_event_exit_task() race") Link: http://lkml.kernel.org/r/20170126153955.GD6515@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-30can: bcm: fix hrtimer/tasklet termination in bcm op removalOliver Hartkopp
When removing a bcm tx operation either a hrtimer or a tasklet might run. As the hrtimer triggers its associated tasklet and vice versa we need to take care to mutually terminate both handlers. Reported-by: Michael Josenhans <michael.josenhans@web.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Michael Josenhans <michael.josenhans@web.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-01-30drm: Don't race connector registrationDaniel Vetter
I was under the misconception that the sysfs dev stuff can be fully set up, and then registered all in one step with device_add. That's true for properties and property groups, but not for parents and child devices. Those must be fully registered before you can register a child. Add a bit of tracking to make sure that asynchronous mst connector hotplugging gets this right. For consistency we rely upon the implicit barriers of the connector->mutex, which is taken anyway, to ensure that at least either the connector or device registration call will work out. Mildly tested since I can't reliably reproduce this on my mst box here. Reported-by: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484237756-2720-1-git-send-email-daniel.vetter@ffwll.ch
2017-01-30drm: prevent double-(un)registration for connectorsDaniel Vetter
If we're unlucky then the registration from a hotplugged connector might race with the final registration step on driver load. And since MST topology discover is asynchronous that's even somewhat likely. v2: Also update the kerneldoc for @registered! v3: Review from Chris: - Improve kerneldoc for late_register/early_unregister callbacks. - Use mutex_destroy. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161218133545.2106-1-daniel.vetter@ffwll.ch (cherry picked from commit e73ab00e9a0f1731f34d0620a9c55f5c30c4ad4e)
2017-01-30x86/microcode: Do not access the initrd after it has been freedBorislav Petkov
When we look for microcode blobs, we first try builtin and if that doesn't succeed, we fallback to the initrd supplied to the kernel. However, at some point doing boot, that initrd gets jettisoned and we shouldn't access it anymore. But we do, as the below KASAN report shows. That's because find_microcode_in_initrd() doesn't check whether the initrd is still valid or not. So do that. ================================================================== BUG: KASAN: use-after-free in find_cpio_data Read of size 1 by task swapper/1/0 page:ffffea0000db9d40 count:0 mapcount:0 mapping: (null) index:0x1 flags: 0x100000000000000() raw: 0100000000000000 0000000000000000 0000000000000001 00000000ffffffff raw: dead000000000100 dead000000000200 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 4.10.0-rc5-debug-00075-g2dbde22 #3 Hardware name: Dell Inc. XPS 13 9360/0839Y6, BIOS 1.2.3 12/01/2016 Call Trace: dump_stack ? _atomic_dec_and_lock ? __dump_page kasan_report_error ? pointer ? find_cpio_data __asan_report_load1_noabort ? find_cpio_data find_cpio_data ? vsprintf ? dump_stack ? get_ucode_user ? print_usage_bug find_microcode_in_initrd __load_ucode_intel ? collect_cpu_info_early ? debug_check_no_locks_freed load_ucode_intel_ap ? collect_cpu_info ? trace_hardirqs_on ? flat_send_IPI_mask_allbutself load_ucode_ap ? get_builtin_firmware ? flush_tlb_func ? do_raw_spin_trylock ? cpumask_weight cpu_init ? trace_hardirqs_off ? play_dead_common ? native_play_dead ? hlt_play_dead ? syscall_init ? arch_cpu_idle_dead ? do_idle start_secondary start_cpu Memory state around the buggy address: ffff880036e74f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880036e74f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff880036e75000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff880036e75080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880036e75100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Reported-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Tested-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170126165833.evjemhbqzaepirxo@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-30pinctrl: intel: merrifield: Add missed check in mrfld_config_set()Andy Shevchenko
Not every pin can be configured. Add missed check to prevent access violation. Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: sunxi: Don't enforce bias disable (for now)Maxime Ripard
Commit 07fe64ba213f ("pinctrl: sunxi: Handle bias disable") actually enforced enforced the disabling of the pull up/down resistors instead of ignoring it like it was done before. This was part of a wider rework to switch to the generic pinconf bindings, and was meant to be merged together with DT patches that were switching to it, and removing what was considered default values by both the binding and the boards. This included no bias on a pin. However, those DT patches were delayed to 4.11, which would be fine only for a significant number boards having the bias setup wrong, which in turns break the MMC on those boards (and possibly other devices too). In order to avoid conflicts as much as possible, bring back the old behaviour for 4.10, and we'll revert that commit once all the DT bits will have landed. Tested-by: Priit Laes <plaes@plaes.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: berlin-bg4ct: fix the value for "sd1a" of pin SCRD0_CRD_PRESJisheng Zhang
This should be a typo. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30xfrm: Add a dummy network device for napi.Steffen Klassert
This patch adds a dummy network device so that we can use gro_cells for IPsec GRO. With this, we handle IPsec GRO with no impact on the generic networking code. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-01-30net: Drop secpath on free after gro merge.Steffen Klassert
With a followup patch, a gro merged skb can have a secpath. So drop it before freeing or reusing the skb. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-01-29Merge tag 'sti-dt-for-v4.10-rc' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into fixes STi DT fix: Since v4.10-rc1, xhci is complaining in loop with : [ 801.953836] usb usb6-port1: Cannot enable. Maybe the USB cable is bad? [ 801.960455] xhci-hcd xhci-hcd.0.auto: Cannot set link state. [ 801.966611] usb usb6-port1: cannot disable (err = -32) set property "snps,dis_u3_susphy_quirk" in DT fix it. * tag 'sti-dt-for-v4.10-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30powerpc/mm: Use the correct pointer when setting a 2MB pteReza Arbab
When setting a 2MB pte, radix__map_kernel_page() is using the address ptep = (pte_t *)pudp; Fix this conversion to use pmdp instead. Use pmdp_ptep() to do this instead of casting the pointer. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-29net: add devm version of alloc_etherdev_mqs functionRafał Miłecki
This patch adds devm_alloc_etherdev_mqs function and devm_alloc_etherdev macro. These can be used for simpler netdev allocation without having to care about calling free_netdev. Thanks to this change drivers, their error paths and removal paths may get simpler by a bit. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29Merge tag 'batadv-next-for-davem-20170128' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== Here are two fixes for batman-adv for net-next: - fix double call of dev_queue_xmit(), caused by the recent introduction of net_xmit_eval(), by Sven Eckelmann - Fix includes for IS_ERR/ERR_PTR, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29tcp: include locally failed retries in retransmission statsYuchung Cheng
Currently the retransmission stats are not incremented if the retransmit fails locally. But we always increment the other packet counters that track total packet/bytes sent. Awkwardly while we don't count these failed retransmits in RETRANSSEGS, we do count them in FAILEDRETRANS. If the qdisc is dropping many packets this could under-estimate TCP retransmission rate substantially from both SNMP or per-socket TCP_INFO stats. This patch changes this by always incrementing retransmission stats on retransmission attempts and failures. Another motivation is to properly track retransmists in SCM_TIMESTAMPING_OPT_STATS. Since SCM_TSTAMP_SCHED collection is triggered in tcp_transmit_skb(), If tp->total_retrans is incremented after the function, we'll always mis-count by the amount of the latest retransmission. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29tcp: record pkts sent and retransmisttedYuchung Cheng
Add two stats in SCM_TIMESTAMPING_OPT_STATS: TCP_NLA_DATA_SEGS_OUT: total data packets sent including retransmission TCP_NLA_TOTAL_RETRANS: total data packets retransmitted The names are picked to be consistent with corresponding fields in TCP_INFO. This allows applications that are using the timestamping API to measure latency stats to also retrive retransmission rate of application write. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29Merge branch 'qcom-emac-misc'David S. Miller
Timur Tabi says: ==================== net: qcom/emac: Although not related, these patches affect the same files, so they should be applied in order. The first patch cleans up logging of when the the phy driver is attached. The second patch always configures the SGMII to use autonegotiation mode. The third patch removes a redundant call to emac_mac_start(). The fourth patch removes some extraneous non-functioning WOL code. The fifth patch adds an error handler for the SGMII block. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: qcom/emac: add an error interrupt handler for the sgmiiTimur Tabi
The SGMII (internal PHY) can report decode errors via an interrupt. It can also report autonegotiation status changes, but we don't need to track those. The SGMII can recover automatically from most decode errors, so we only reset the interface if we get multiple consecutive errors. It's possible for bogus decode errors to be reported while the link is being brought up. The interrupt is registered when the interface is opened, and it's enabled after the link is up. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: qcom/emac: remove extraneous wake-on-lan codeTimur Tabi
The EMAC driver does not support wake-on-lan, but there is still code left-over that partially enables it. Remove that code and a few macros that support it. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: qcom/emac: do not call emac_mac_start twiceTimur Tabi
emac_mac_start() uses information from the external PHY to program the MAC, so it makes no sense to call it before the link is up. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: qcom/emac: always use autonegotiation to configure the SGMII linkTimur Tabi
Regardless of how the external PHY is configured, the internal PHY (the "SGMII" block) is capable of configuring the SGMII link automatically. When the external PHY link comes up, regardless of how it is configured, the SGMII link is configured automatically. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: qcom/emac: display the phy driver info after we connectTimur Tabi
The PHY driver is attached only when the driver calls phy_connect_direct(). Calling phy_attached_print() to display information about the PHY driver prior to that point is meaningless. The interface can be brought down, a new PHY driver can be loaded, and the interface then brought back up. This is the correct time to display information about the attached driver. Since phy_attached_print() also prints information about the interrupt, that needs to be set as well. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: adaptec: starfire: add checks for dma mapping errorsAlexey Khoroshilov
init_ring(), refill_rx_ring() and start_tx() don't check if mapping dma memory succeed. The patch adds the checks and failure handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29openvswitch: Simplify do_execute_actions().andy zhou
do_execute_actions() implements a worthwhile optimization: in case an output action is the last action in an action list, skb_clone() can be avoided by outputing the current skb. However, the implementation is more complicated than necessary. This patch simplify this logic. Signed-off-by: Andy Zhou <azhou@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]PauseSean Nyekjaer
As pr commit "net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause" this phy driver should not set these feature bits. Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Fixes: 9d162ed69f51 ("net: phy: micrel: add support for KSZ8795") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29Merge branch 'dsa-multi-chip-prep'David S. Miller
Vivien Didelot says: ==================== net: dsa: preparatory patches for multi-chip In order to introduce support for multi-chip configuration, we need to do a few enhancements. This patchset makes the number of ports in a switch dynamic (instead of capping to DSA_MAX_PORTS), stores the switch and index of a port in the dsa_port structure, uses it in the slave private structure, and exposes the bridge device a port belongs to. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: b53: use dsa_port's bridge pointerVivien Didelot
Now that DSA exposes the bridge device pointer to which a port belongs, use it when programming the port based VLANs and thus remove the cache. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: qca8k: use dsa_port's bridge pointerVivien Didelot
Now that DSA exposes the bridge device pointer to which a port belongs, use it when programming the port based VLANs and thus remove the cache. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: mv88e6xxx: use dsa_port's bridge pointerVivien Didelot
Now that DSA exposes the bridge device pointer to which a port belongs, use it when programming the port based VLANs and thus remove the cache. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: pass bridge device when a port leavesVivien Didelot
Upon reception of the NETDEV_CHANGEUPPER, a leaving port is already unbridged, so reflect this by assigning the port's bridge_dev pointer to NULL before calling the port_bridge_leave DSA driver operation. Now that the bridge_dev pointer is exposed to the drivers, reflecting the current state of the DSA switch fabric is necessary for the drivers to adjust their port based VLANs correctly. Pass the bridge device pointer to the port_bridge_leave operation so that drivers have all information to re-program their chips properly, and do not need to cache it anymore. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: dsa: move bridge device in dsa_portVivien Didelot
Move the bridge_dev pointer from dsa_slave_priv to dsa_port so that DSA drivers can access this information and remove the need to cache it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-16 13:12:06 +0000