summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-11drm/vmwgfx/sou: Use drm_mode_config_resetRoland Scheidegger
Same problem as in stdu, same fix. Fixes: 51f644b40b4b ("drm/atomic-helper: reset vblank on crtc reset") Acked-by: Charmaine Lee <charmainel@vmware.com> Reviewed-by: Zack Rusin <zackr@vmware.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com>
2020-08-11drm/vmwgfx/stdu: Use drm_mode_config_resetDaniel Vetter
When converting to atomic the state reset was done by directly calling the functions, and before the modeset object was fully initialized. This means the various ->dev pointers weren't set up. After commit 51f644b40b4b794b28b982fdd5d0dd8ee63f9272 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Jun 12 18:00:49 2020 +0200 drm/atomic-helper: reset vblank on crtc reset this started to oops because now we're trying to derefence drm_crtc->dev. Fix this up by entirely switching over to drm_mode_config_reset, called once everything is set up. Fixes: 51f644b40b4b ("drm/atomic-helper: reset vblank on crtc reset") Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com>
2020-08-11drm/vmwgfx: Fix two list_for_each loop exit testsDan Carpenter
These if statements are supposed to be true if we ended the list_for_each_entry() loops without hitting a break statement but they don't work. In the first loop, we increment "i" after the "if (i == unit)" condition so we don't necessarily know that "i" is not equal to unit at the end of the loop. In the second loop we exit when mode is not pointing to a valid drm_display_mode struct so it doesn't make sense to check "mode->type". Fixes: a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com>
2020-08-11drm/vmwgfx: Use correct vmw_legacy_display_unit pointerDan Carpenter
The "entry" pointer is an offset from the list head and it doesn't point to a valid vmw_legacy_display_unit struct. Presumably the intent was to point to the last entry. Also the "i++" wasn't used so I have removed that as well. Fixes: d7e1958dbe4a ("drm/vmwgfx: Support older hardware.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com>
2020-08-11drm/vmwgfx: Use struct_size() helperGustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Roland Scheidegger <sroland@vmware.com>
2020-08-11Merge tag 'drm-misc-next-fixes-2020-08-05' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next-fixes for v5.9-rc1: - Fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - Fix a fbcon OOB read in fbdev, found by syzbot. - Mark vga_tryget static as it's not used elsewhere. - Small fixes to xlnx. - Remove null check for kfree in drm_dev_release. - Fix DRM_FORMAT_MOD_AMLOGIC_FBC definition. - Fix mode initialization in omap_connector_mode_valid(). Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b2043dad-f118-bd19-54a6-f23bf6264007@linux.intel.com
2020-08-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - an update to Elan touchpad controller driver supporting newer ICs with enhanced precision reports and a new firmware update process - an update to EXC3000 touch controller supporting additional parts - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: exc3000 - add support to query model and fw_version Input: exc3000 - add reset gpio support Input: exc3000 - add EXC80H60 and EXC80H84 support dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Input: sentelic - fix error return when fsp_reg_write fails Input: alps - remove redundant assignment to variable ret Input: ims-pcu - return error code rather than -ENOMEM Input: elan_i2c - add ic type 0x15 Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Input: uinput - fix typo in function name documentation Input: ati_remote2 - add missing newlines when printing module parameters Input: psmouse - add a newline when printing 'proto' by sysfs Input: synaptics-rmi4 - drop a duplicated word Input: elan_i2c - add support for high resolution reports Input: elan_i2c - do not constantly re-query pattern ID Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14 Input: elan_i2c - handle firmware updated on newer ICs Input: elan_i2c - add support for different firmware page sizes Input: elan_i2c - fix detecting IAP version on older controllers Input: elan_i2c - handle devices with patterns above 1 ...
2020-08-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - fix for some modern devices that return multi-byte battery report, from Grant Likely - fix for devices with Resolution Multiplier, from Peter Hutterer - device probing speed increase, from Dmitry Torokhov - ThinkPad 10 Ultrabook Keyboard support, from Hans de Goede - other small assorted fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: quirks: add NOGET quirk for Logitech GROUP HID: Replace HTTP links with HTTPS ones HID: udraw-ps3: Replace HTTP links with HTTPS ones HID: mcp2221: Replace HTTP links with HTTPS ones HID: input: Fix devices that return multiple bytes in battery report HID: lenovo: Fix spurious F23 key press report during resume from suspend HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard fn_lock support HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support HID: lenovo: Rename fn_lock sysfs attr handlers to make them generic HID: lenovo: Factor out generic parts of the LED code HID: lenovo: Merge tpkbd and cptkbd data structures HID: intel-ish-hid: Replace PCI_DEV_FLAGS_NO_D3 with pci_save_state HID: Wiimote: Treat the d-pad as an analogue stick HID: input: do not run GET_REPORT unless there's a Resolution Multiplier HID: usbhid: remove redundant assignment to variable retval HID: usbhid: do not sleep when opening device
2020-08-10ktest.pl: Fix spelling mistake "Cant" -> "Can't"Colin Ian King
There is a spelling mistake in an error message. Fix it. Link: https://lkml.kernel.org/r/20200810100750.61475-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-08-10ktest.pl: Change the logic to control the size of the log file emailedSteven Rostedt (VMware)
If the log file for a given test is larger than the max size given then use set the seek from the end of the log file instead of from the start of the test. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-08-10x86/kvm/hyper-v: Synic default SCONTROL MSR needs to be enabledJon Doron
Based on an analysis of the HyperV firmwares (Gen1 and Gen2) it seems like the SCONTROL is not being set to the ENABLED state as like we have thought. Also from a test done by Vitaly Kuznetsov, running a nested HyperV it was concluded that the first access to the SCONTROL MSR with a read resulted with the value of 0x1, aka HV_SYNIC_CONTROL_ENABLE. It's important to note that this diverges from the value states in the HyperV TLFS of 0. Signed-off-by: Jon Doron <arilou@gmail.com> Message-Id: <20200717125238.1103096-2-arilou@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-10vdpa/mlx5: fix up endian-ness for mtuMichael S. Tsirkin
VDPA mlx5 accesses config space as native endian - this is wrong since it's a modern device and actually uses LE. It only supports modern guests so we could punt and just force LE, but let's use the full virtio APIs since people tend to copy/paste code, and this is not data path anyway. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-10vdpa: Fix pointer math bug in vdpasim_get_config()Dan Carpenter
If "offset" is non-zero then we end up copying from beyond the end of the config because of pointer math. We can fix this by casting the struct to a u8 pointer. Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200406144552.GF68494@mwanda Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-08-10recordmcount: Fix build failure on non arm64Christophe Leroy
Commit ea0eada45632 leads to the following build failure on powerpc: HOSTCC scripts/recordmcount scripts/recordmcount.c: In function 'arm64_is_fake_mcount': scripts/recordmcount.c:440: error: 'R_AARCH64_CALL26' undeclared (first use in this function) scripts/recordmcount.c:440: error: (Each undeclared identifier is reported only once scripts/recordmcount.c:440: error: for each function it appears in.) make[2]: *** [scripts/recordmcount] Error 1 Make sure R_AARCH64_CALL26 is always defined. Fixes: ea0eada45632 ("recordmcount: only record relocation of type R_AARCH64_CALL26 on arm64.") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Gregory Herrero <gregory.herrero@oracle.com> Cc: Gregory Herrero <gregory.herrero@oracle.com> Link: https://lore.kernel.org/r/5ca1be21fa6ebf73203b45fd9aadd2bafb5e6b15.1597049145.git.christophe.leroy@csgroup.eu Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-08-10vdpa/mlx5: Fix pointer math in mlx5_vdpa_get_config()Dan Carpenter
There is a pointer math bug here so if "offset" is non-zero then this will copy memory from beyond the end of the array. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200808093241.GB115053@mwanda Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com>; Parav Pandit <parav@mellanox.com>; virtualization@lists.linux-foundation.org; linux-kernel@vger.kernel.org; kernel-janitors@vger.kernel.org Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
2020-08-10vdpa/mlx5: fix memory allocation failure checksColin Ian King
The memory allocation failure checking for in and out is currently checking if the pointers are valid rather than the contents of what they point to. Hence the null check on failed memory allocations is incorrect. Fix this by adding the missing indirection in the check. Also for the default case, just set the *in and *out to null as these don't have any thing allocated to kfree. Finally remove the redundant *in and *out check as these have been already done on each allocation in the case statement. Addresses-Coverity: ("Null pointer dereference") Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200806160828.90463-1-colin.king@canonical.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Eli Cohen <eli@mellanox.com>
2020-08-10vdpa/mlx5: Fix uninitialised variable in core/mr.cAlex Dewar
If the kernel is unable to allocate memory for the variable dmr then err will be returned without being set. Set err to -ENOMEM in this case. Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code") Addresses-Coverity: ("Uninitialized variables") Signed-off-by: Alex Dewar <alex.dewar@gmx.co.uk> Link: https://lore.kernel.org/r/20200806185625.67344-1-alex.dewar@gmx.co.uk Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Eli Cohen <eli@mellanox.com>
2020-08-10vdpa_sim: init iommu lockMichael S. Tsirkin
The patch adding the iommu lock did not initialize it. The struct is zero-initialized so this is mostly a problem when using lockdep. Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Max Gurtovoy <maxg@mellanox.com> Fixes: 0ea9ee430e74 ("vdpasim: protect concurrent access to iommu iotlb") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-10Merge branch 'for-5.9/wiimote' into for-linusJiri Kosina
2020-08-10Merge branch 'for-5.9/lenovo' into for-linusJiri Kosina
- ThinkPad 10 Ultrabook Keyboard support, from Hans de Goede
2020-08-10Merge branch 'for-5.9/intel-ish' into for-linusJiri Kosina
2020-08-10Merge branch 'for-5.9/core-v2' into for-linusJiri Kosina
- fix for some modern devices that return multi-byte battery report, from Grant Likely - fix for devices with Resolution Multiplier, from Peter Hutterer - device probing speed increase, from Dmitry Torokhov
2020-08-10MIPS: KVM: Convert a fallthrough comment to fallthroughJiaxun Yang
There is a fallthrough comment being forgotten, GCC complains about it: arch/mips/kvm/emulate.c: In function kvm_mips_emulate_load: arch/mips/kvm/emulate.c:1936:21: error: this statement may fall through 1936 | vcpu->mmio_needed = 1; /* unsigned */ | ~~~~~~~~~~~~~~~~~~^~~ arch/mips/kvm/emulate.c:1939:2: note: here 1939 | case lw_op: Just fix it. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Huacai Chen <chenhc@lemote.com> Message-Id: <20200810011749.3211128-1-jiaxun.yang@flygoat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-09Merge tag 'kbuild-v5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - run the checker (e.g. sparse) after the compiler - remove unneeded cc-option tests for old compiler flags - fix tar-pkg to install dtbs - introduce ccflags-remove-y and asflags-remove-y syntax - allow to trace functions in sub-directories of lib/ - introduce hostprogs-always-y and userprogs-always-y syntax - various Makefile cleanups * tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled kbuild: introduce hostprogs-always-y and userprogs-always-y kbuild: sort hostprogs before passing it to ifneq kbuild: move host .so build rules to scripts/gcc-plugins/Makefile kbuild: Replace HTTP links with HTTPS ones kbuild: trace functions in subdirectories of lib/ kbuild: introduce ccflags-remove-y and asflags-remove-y kbuild: do not export LDFLAGS_vmlinux kbuild: always create directories of targets powerpc/boot: add DTB to 'targets' kbuild: buildtar: add dtbs support kbuild: remove cc-option test of -ffreestanding kbuild: remove cc-option test of -fno-stack-protector Revert "kbuild: Create directory for target DTB" kbuild: run the checker after the compiler
2020-08-09Merge tag 'nfsd-5.9' of git://git.linux-nfs.org/projects/cel/cel-2.6Linus Torvalds
Pull NFS server updates from Chuck Lever: "Highlights: - Support for user extended attributes on NFS (RFC 8276) - Further reduce unnecessary NFSv4 delegation recalls Notable fixes: - Fix recent krb5p regression - Address a few resource leaks and a rare NULL dereference Other: - De-duplicate RPC/RDMA error handling and other utility functions - Replace storage and display of kernel memory addresses by tracepoints" * tag 'nfsd-5.9' of git://git.linux-nfs.org/projects/cel/cel-2.6: (38 commits) svcrdma: CM event handler clean up svcrdma: Remove transport reference counting svcrdma: Fix another Receive buffer leak SUNRPC: Refresh the show_rqstp_flags() macro nfsd: netns.h: delete a duplicated word SUNRPC: Fix ("SUNRPC: Add "@len" parameter to gss_unwrap()") nfsd: avoid a NULL dereference in __cld_pipe_upcall() nfsd4: a client's own opens needn't prevent delegations nfsd: Use seq_putc() in two functions svcrdma: Display chunk completion ID when posting a rw_ctxt svcrdma: Record send_ctxt completion ID in trace_svcrdma_post_send() svcrdma: Introduce Send completion IDs svcrdma: Record Receive completion ID in svc_rdma_decode_rqst svcrdma: Introduce Receive completion IDs svcrdma: Introduce infrastructure to support completion IDs svcrdma: Add common XDR encoders for RDMA and Read segments svcrdma: Add common XDR decoders for RDMA and Read segments SUNRPC: Add helpers for decoding list discriminators symbolically svcrdma: Remove declarations for functions long removed svcrdma: Clean up trace_svcrdma_send_failed() tracepoint ...
2020-08-09Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull regset conversion fix from Al Viro: "Fix a regression from an unnoticed bisect hazard in the regset series. A bunch of old (aout, originally) primitives used by coredumps became dead code after fdpic conversion to regsets. Removal of that dead code had been the first commit in the followups to regset series; unfortunately, it happened to hide the bisect hazard on sh (extern for fpregs_get() had not been updated in the main series when it should have been; followup simply made fpregs_get() static). And without that followup commit this bisect hazard became breakage in the mainline" Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kill unused dump_fpu() instances
2020-08-09Merge tag 'pinctrl-v5.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of the pin control changes for the v5.9 kernel series: Core changes: - The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range() macro" was put in an immutable branch and merged into the pinctrl tree as well. We see these changes also here. - Improved debug output for pins used as GPIO. New drivers: - Ocelot Sparx5 SoC driver. - Intel Emmitsburg SoC subdriver. - Intel Tiger Lake-H SoC subdriver. - Qualcomm PM660 SoC subdriver. - Renesas SH-PFC R8A774E1 subdriver. Driver improvements: - Linear improvement and cleanups of the Intel drivers for Cherryview, Lynxpoint, Baytrail etc. Improved locking among other things. - Renesas SH-PFC has added support for RPC pins, groups, and functions to r8a77970 and r8a77980. - The newere Freescale (now NXP) i.MX8 pin controllers have been modularized. This is driven by the Google Android GKI initiative I think. - Open drain support for pins on the Qualcomm IPQ4019. - The Ingenic driver can handle both edges IRQ detection. - A big slew of documentation fixes all over the place. - A few irqchip template conversions by yours truly. * tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits) dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC pinctrl: stmfx: Use irqchip template pinctrl: amd: Use irqchip template pinctrl: mediatek: fix build for tristate changes pinctrl: samsung: Use bank name as irqchip name pinctrl: core: print gpio in pins debugfs file pinctrl: mediatek: add mt6779 eint support pinctrl: mediatek: add pinctrl support for MT6779 SoC pinctrl: mediatek: avoid virtual gpio trying to set reg pinctrl: mediatek: update pinmux definitions for mt6779 pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API pinctrl: mcp23s08: Use irqchip template pinctrl: sx150x: Use irqchip template dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes pinctrl: intel: Add Intel Emmitsburg pin controller support pinctl: ti: iodelay: Replace HTTP links with HTTPS ones Revert "gpio: omap: handle pin config bias flags" pinctrl: single: Use fallthrough pseudo-keyword pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword pinctrl: baytrail: Use fallthrough pseudo-keyword ...
2020-08-09Merge tag 'mtd/for-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd updates from Miquel Raynal: "MTD core changes: - Spelling - http to https updates NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4, TC58NVG0S3E, and TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC SPI NOR core changes: - Disable Quad Mode in spi_nor_restore(). - Don't abort BFPT parsing when QER reserved value is used. - Add support/update capabilities for few flashes. - Drop s70fl01gs flash: it does not support RDSR(05h) which is critical for erase/write. - Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during the release cycle. SPI NOR controller drivers changes: - Move the cadence-quadspi driver to spi-mem. The series was taken through the SPI tree. Merge it also in spi-nor/next to avoid conflicts during the release cycle. - intel-spi: - Add new PCI IDs. - Ignore the Write Disable command, the controller doesn't support it. - Fix performance regression" * tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits) MTD: pfow.h: drop a duplicated word MTD: mtd-abi.h: drop a duplicated word mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones mtd: Replace HTTP links with HTTPS ones mtd: hyperbus: Replace HTTP links with HTTPS ones mtd: revert "spi-nor: intel: provide a range for poll_timout" mtd: spi-nor: update read capabilities for w25q64 and s25fl064k mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g mtd: spi-nor: macronix: Add support for mx66u2g45g mtd: spi-nor: intel-spi: Simulate WRDI command mtd: spi-nor: Disable the flash quad mode in spi_nor_restore() mtd: spi-nor: Add capability to disable flash quad mode mtd: spi-nor: spansion: Remove s70fl01gs from flash_info mtd: spi-nor: sfdp: do not make invalid quad enable fatal dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags mtd: rawnand: stm32_fmc2: get resources from parent node mtd: rawnand: stm32_fmc2: use regmap APIs memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation dt-bindings: mtd: update STM32 FMC2 NAND controller documentation ...
2020-08-09thunderbolt: merge fix for kunix_resource changesStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-09MIPS: VZ: Only include loongson_regs.h for CPU_LOONGSON64Huacai Chen
Only Loongson64 platform has and needs loongson_regs.h, including it unconditionally will cause build errors. Fixes: 7f2a83f1c2a941ebfee5 ("KVM: MIPS: Add CPUCFG emulation for Loongson-3") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Message-Id: <1596891052-24052-1-git-send-email-chenhc@lemote.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-09Merge tag 'kvm-ppc-next-5.9-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-next-5.6 PPC KVM update for 5.9 - Improvements and bug-fixes for secure VM support, giving reduced startup time and memory hotplug support. - Locking fixes in nested KVM code - Increase number of guests supported by HV KVM to 4094 - Preliminary POWER10 support
2020-08-09x86: Expose SERIALIZE for supported cpuidPaolo Bonzini
The SERIALIZE instruction is supported by Tntel processors, like Sapphire Rapids. SERIALIZE is a faster serializing instruction which does not modify registers, arithmetic flags or memory, will not cause VM exit. It's availability is indicated by CPUID.(EAX=7,ECX=0):ECX[bit 14]. Expose it in KVM supported CPUID. This way, KVM could pass this information to guests and they can make use of these features accordingly. Signed-off-by: Cathy Zhang <cathy.zhang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-09Merge tag 'kvmarm-5.9' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next-5.6 KVM/arm64 updates for Linux 5.9: - Split the VHE and nVHE hypervisor code bases, build the EL2 code separately, allowing for the VHE code to now be built with instrumentation - Level-based TLB invalidation support - Restructure of the vcpu register storage to accomodate the NV code - Pointer Authentication available for guests on nVHE hosts - Simplification of the system register table parsing - MMU cleanups and fixes - A number of post-32bit cleanups and other fixes
2020-08-09KVM: x86: Don't attempt to load PDPTRs when 64-bit mode is enabledSean Christopherson
Don't attempt to load PDPTRs if EFER.LME=1, i.e. if 64-bit mode is enabled. A recent change to reload the PDTPRs when CR0.CD or CR0.NW is toggled botched the EFER.LME handling and sends KVM down the PDTPR path when is_paging() is true, i.e. when the guest toggles CD/NW in 64-bit mode. Split the CR0 checks for 64-bit vs. 32-bit PAE into separate paths. The 64-bit path is specifically checking state when paging is toggled on, i.e. CR0.PG transititions from 0->1. The PDPTR path now needs to run if the new CR0 state has paging enabled, irrespective of whether paging was already enabled. Trying to shave a few cycles to make the PDPTR path an "else if" case is a mess. Fixes: d42e3fae6faed ("kvm: x86: Read PDPTEs on CR0.CD and CR0.NW changes") Cc: Jim Mattson <jmattson@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Peter Shier <pshier@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200714015732.32426-1-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-10kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option baseMasahiro Yamada
Commit d26e94149276 ("kbuild: no gcc-plugins during cc-option tests") was neeeded because scripts/Makefile.gcc-plugins was too early. This is unneeded by including scripts/Makefile.gcc-plugins last, and being careful to not add cc-option tests after it. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-10kbuild: include scripts/Makefile.* only when relevant CONFIG is enabledMasahiro Yamada
Currently, the top Makefile includes all of scripts/Makefile.<feature> even if the associated CONFIG option is disabled. Do not include unneeded Makefiles in order to slightly optimize the parse stage. Include $(include-y), and ignore $(include-). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-10kbuild: introduce hostprogs-always-y and userprogs-always-yMasahiro Yamada
To build host programs, you need to add the program names to 'hostprogs' to use the necessary build rule, but it is not enough to build them because there is no dependency. There are two types of host programs: built as the prerequisite of another (e.g. gen_crc32table in lib/Makefile), or always built when Kbuild visits the Makefile (e.g. genksyms in scripts/genksyms/Makefile). The latter is typical in Makefiles under scripts/, which contains host programs globally used during the kernel build. To build them, you need to add them to both 'hostprogs' and 'always-y'. This commit adds hostprogs-always-y as a shorthand. The same applies to user programs. net/bpfilter/Makefile builds bpfilter_umh on demand, hence always-y is unneeded. In contrast, programs under samples/ are added to both 'userprogs' and 'always-y' so they are always built when Kbuild visits the Makefiles. userprogs-always-y works as a shorthand. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2020-08-10kbuild: sort hostprogs before passing it to ifneqMasahiro Yamada
The conditional: ifneq ($(hostprogs),) ... is evaluated to true if $(hostprogs) does not contain any word but whitespace characters. ifneq ($(strip $(hostprogs)),) ... is a safe way to avoid interpreting whitespace as a non-empty value, but I'd rather want to use the side-effect of $(sort ...) to do the equivalent. $(sort ...) is used in scripts/Makefile.host in order to drop duplication in $(hostprogs). It is also useful to strip excessive spaces. Move $(sort ...) before evaluating the ifneq. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-10kbuild: move host .so build rules to scripts/gcc-plugins/MakefileMasahiro Yamada
The host shared library rules are currently implemented in scripts/Makefile.host, but actually GCC-plugin is the only user of them. (The VDSO .so files are built for the target by different build rules) Hence, they do not need to be treewide available. Move all the relevant build rules to scripts/gcc-plugins/Makefile. I also optimized the build steps so *.so is directly built from .c because every upstream plugin is compiled from a single source file. I am still keeping the multi-file plugin support, which Kees Cook mentioned might be needed by out-of-tree plugins. (https://lkml.org/lkml/2019/1/11/1107) If the plugin, foo.so, is compiled from two files foo.c and foo2.c, then you can do like follows: foo-objs := foo.o foo2.o Single-file plugins do not need the *-objs notation. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Kees Cook <keescook@chromium.org>
2020-08-10kbuild: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-10kbuild: trace functions in subdirectories of lib/Masahiro Yamada
ccflags-remove-$(CONFIG_FUNCTION_TRACER) += $(CC_FLAGS_FTRACE) exists here in sub-directories of lib/ to keep the behavior of commit 2464a609ded0 ("ftrace: do not trace library functions"). Since that commit, not only the objects in lib/ but also the ones in the sub-directories are excluded from ftrace (although the commit description did not explicitly mention this). However, most of library functions in sub-directories are not so hot. Re-add them to ftrace. Going forward, only the objects right under lib/ will be excluded. Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-08-10kbuild: introduce ccflags-remove-y and asflags-remove-yMasahiro Yamada
CFLAGS_REMOVE_<file>.o filters out flags when compiling a particular object, but there is no convenient way to do that for every object in a directory. Add ccflags-remove-y and asflags-remove-y to make it easily. Use ccflags-remove-y to clean up some Makefiles. The add/remove order works as follows: [1] KBUILD_CFLAGS specifies compiler flags used globally [2] ccflags-y adds compiler flags for all objects in the current Makefile [3] ccflags-remove-y removes compiler flags for all objects in the current Makefile (New feature) [4] CFLAGS_<file> adds compiler flags per file. [5] CFLAGS_REMOVE_<file> removes compiler flags per file. Having [3] before [4] allows us to remove flags from most (but not all) objects in the current Makefile. For example, kernel/trace/Makefile removes $(CC_FLAGS_FTRACE) from all objects in the directory, then adds it back to trace_selftest_dynamic.o and CFLAGS_trace_kprobe_selftest.o The same applies to lib/livepatch/Makefile. Please note ccflags-remove-y has no effect to the sub-directories. In contrast, the previous notation got rid of compiler flags also from all the sub-directories. The following are not affected because they have no sub-directories: arch/arm/boot/compressed/ arch/powerpc/xmon/ arch/sh/ kernel/trace/ However, lib/ has several sub-directories. To keep the behavior, I added ccflags-remove-y to all Makefiles in subdirectories of lib/, except the following: lib/vdso/Makefile - Kbuild does not descend into this Makefile lib/raid/test/Makefile - This is not used for the kernel build I think commit 2464a609ded0 ("ftrace: do not trace library functions") excluded too much. In the next commit, I will remove ccflags-remove-y from the sub-directories of lib/. Suggested-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Brendan Higgins <brendanhiggins@google.com> (KUnit) Tested-by: Anders Roxell <anders.roxell@linaro.org>
2020-08-10kbuild: do not export LDFLAGS_vmlinuxMasahiro Yamada
When you clean the build tree for ARCH=arm, you may see the following error message from 'nm' command: $ make -j24 ARCH=arm clean CLEAN arch/arm/crypto CLEAN arch/arm/kernel CLEAN arch/arm/mach-at91 CLEAN arch/arm/mach-omap2 CLEAN arch/arm/vdso CLEAN certs CLEAN lib CLEAN usr CLEAN net/wireless CLEAN drivers/firmware/efi/libstub nm: 'arch/arm/boot/compressed/../../../../vmlinux': No such file /bin/sh: 1: arithmetic expression: expecting primary: " " CLEAN arch/arm/boot/compressed CLEAN drivers/scsi CLEAN drivers/tty/vt CLEAN arch/arm/boot CLEAN vmlinux.symvers modules.builtin modules.builtin.modinfo Even if you rerun the same command, the error message will not be shown despite vmlinux is already gone. To reproduce it, the parallel option -j is needed. Single thread cleaning always executes 'archclean', 'vmlinuxclean' in this order, so vmlinux still exists when arch/arm/boot/compressed/ is cleaned. Looking at arch/arm/boot/compressed/Makefile does not help understand the reason of the error message. Both KBSS_SZ and LDFLAGS_vmlinux are assigned with '=' operator, hence, they are not expanded unless used. Obviously, 'make clean' does not use them. In fact, the root cause exists in the top Makefile: export LDFLAGS_vmlinux Since LDFLAGS_vmlinux is an exported variable, LDFLAGS_vmlinux in arch/arm/boot/compressed/Makefile is expanded when scripts/Makefile.clean has a command to execute. This is why the error message shows up only when there exist build artifacts in arch/arm/boot/compressed/. Adding 'unexport LDFLAGS_vmlinux' to arch/arm/boot/compressed/Makefile will fix it as far as ARCH=arm is concerned, but I think the proper fix is to get rid of 'export LDFLAGS_vmlinux' from the top Makefile. LDFLAGS_vmlinux in the top Makefile contains linker flags for the top vmlinux. LDFLAGS_vmlinux in arch/arm/boot/compressed/Makefile is for arch/arm/boot/compressed/vmlinux. They just happen to have the same variable name, but are used for different purposes. Stop shadowing LDFLAGS_vmlinux. This commit passes LDFLAGS_vmlinux to scripts/link-vmlinux.sh via a command line parameter instead of via an environment variable. LD and KBUILD_LDFLAGS are exported, but I did the same for consistency. Anyway, they must be included in cmd_link-vmlinux to allow if_changed to detect the changes in LD or KBUILD_LDFLAGS. The following Makefiles are not affected: arch/arm/boot/compressed/Makefile arch/h8300/boot/compressed/Makefile arch/nios2/boot/compressed/Makefile arch/parisc/boot/compressed/Makefile arch/s390/boot/compressed/Makefile arch/sh/boot/compressed/Makefile arch/sh/boot/romimage/Makefile arch/x86/boot/compressed/Makefile They use ':=' or '=' to clear the LDFLAGS_vmlinux inherited from the top Makefile. We need to take a closer look at the impact to unicore32 and xtensa. arch/unicore32/boot/compressed/Makefile only uses '+=' operator for LDFLAGS_vmlinux. So, the decompressor previously inherited the linker flags from the top Makefile. However, commit 70fac51feaf2 ("unicore32 additional architecture files: boot process") was merged before commit 1f2bfbd00e46 ("kbuild: link of vmlinux moved to a script"). So, I rather consider this is a bug fix of 1f2bfbd00e46. arch/xtensa/boot/boot-elf/Makefile is also affected, but this is also considered a fix for the same reason. It did not inherit LDFLAGS_vmlinux when commit 4bedea945451 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 2") was merged. I deleted $(LDFLAGS_vmlinux), which is now empty. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2020-08-10kbuild: always create directories of targetsMasahiro Yamada
Currently, the directories of objects are automatically created only for O= builds. It should not hurt to cater to this for in-tree builds too. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-08Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix tegra194-cpufreq module build failure caused by __cpu_logical_map not being exported. - Improve fixed_addresses comment regarding the fixmap buffer sizes. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix __cpu_logical_map undefined issue arm64/fixmap: make notes of fixed_addresses more precisely
2020-08-08arm64: Fix __cpu_logical_map undefined issueKefeng Wang
The __cpu_logical_map undefined issue occued when the new tegra194-cpufreq drvier building as a module. ERROR: modpost: "__cpu_logical_map" [drivers/cpufreq/tegra194-cpufreq.ko] undefined! The driver using cpu_logical_map() macro which will expand to __cpu_logical_map, we can't access it in a drvier. Let's turn cpu_logical_map() into a C wrapper and export it to fix the build issue. Also create a function set_cpu_logical_map(cpu, hwid) when assign a value to cpu_logical_map(cpu). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-08-08arm64/fixmap: make notes of fixed_addresses more preciselyPingfan Liu
These 'compile-time allocated' memory buffers can occupy more than one page and each enum increment is page-sized. So improve the note about it. Signed-off-by: Pingfan Liu <kernelfans@gmail.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/1596460720-19243-1-git-send-email-kernelfans@gmail.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-08-08Merge tag 'for-linus-5.9-1' of git://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI updates from Corey Minyard: "Minor cleanups to the IPMI driver for 5.9 Nothing of any major consequence. Duplicate code, some missing \n's in sysfs files, some documentation and comment changes" * tag 'for-linus-5.9-1' of git://github.com/cminyard/linux-ipmi: ipmi/watchdog: add missing newlines when printing parameters by sysfs ipmi: remve duplicate code in __ipmi_bmc_register() ipmi: ssif: Remove finished TODO comment about SMBus alert Doc: driver-api: ipmi: Add description of alerts_broken module param
2020-08-07Merge tag 'for-v5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - add COOL/WARM/HOT state from JEITA JISC8712:2015 specification - convert simple-battery DT binding to YAML - add long-life charging mode Battery/charger drivers: - bq25150: new charger driver - bq27xxx: add support for BQ27z561 and BQ28z610 - max17040: support CAPACITY_ALERT_MIN - sbs-battery: add PEC support - wilco-ec: support long-life charging mode - bq25890: fix DT binding - misc. fixes and cleanups Reset drivers: - linkstation: new reset driver" * tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits) power: supply: wilco_ec: Add long life charging mode power: supply: bq27xxx_battery: Add the BQ28z610 Battery monitor dt-bindings: power: Add BQ28z610 compatible power: supply: bq27xxx_battery: Add the BQ27Z561 Battery monitor dt-bindings: power: Add BQ27Z561 compatible power: supply: test_power: Fix battery_current initial value power: supply: Fix kerneldoc of power_supply_temp2resist_simple() power: supply: cpcap-battery: Fix kerneldoc of cpcap_battery_read_accumulated() dt-bindings: power: Convert battery.txt to battery.yaml power: supply: rt5033_battery: Fix error code in rt5033_battery_probe() power: supply: max17040: Add POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN power: supply: check if calc_soc succeeded in pm860x_init_battery power: supply: bq2xxxx: Replace HTTP links with HTTPS ones power: reset: add driver for LinkStation power off power: supply: sc27xx: prevent adc * 1000 from overflow math64: New DIV_S64_ROUND_CLOSEST helper power: fix duplicated words in bq2415x_charger.h power: Convert to DEFINE_SHOW_ATTRIBUTE power: reset: keystone-reset: Replace HTTP links with HTTPS ones power: supply: bq25150 introduce the bq25150 ...
2020-08-07Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "No common topic whatsoever in those, sorry" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: define inode flags using bit numbers iov_iter: Move unnecessary inclusion of crypto/hash.h dlmfs: clean up dlmfs_file_{read,write}() a bit
generated by cgit (git 2.34.1) at 2025-09-22 14:53:15 +0000