| Age | Commit message (Collapse) | Author |
|---|
|
During modeset cleanup on driver unload we may have a pending
hotplug work. This needs to be canceled early during the teardown
so that it does not fire after we have freed the connector.
We do this after drm_kms_helper_poll_fini(dev) since this might
trigger modeset retry work due to link retrain and before
intel_fbdev_fini() since this work requires the lock from fbdev.
If this is not done we may see something like:
DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock))
------------[ cut here ]------------
WARNING: CPU: 4 PID: 5010 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x4e/0x60
Modules linked in: i915(-) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm vgem ax88179_178
+a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e ptp pps_core prime_numbers i2c_hid
+[last unloaded: snd_hda_intel]
CPU: 4 PID: 5010 Comm: drv_module_relo Tainted: G U 4.14.0-rc3-CI-CI_DRM_3186+ #1
Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWX1.R00.X104.A03.1709140524 09/14/2017
task: ffff8803c827aa40 task.stack: ffffc90000520000
RIP: 0010:mutex_destroy+0x4e/0x60
RSP: 0018:ffffc90000523d58 EFLAGS: 00010292
RAX: 000000000000002a RBX: ffff88044fbef648 RCX: 0000000000000000
RDX: 0000000080000001 RSI: 0000000000000001 RDI: ffffffff810f0cf0
RBP: ffffc90000523d60 R08: 0000000000000001 R09: 0000000000000001
R10: 000000000f21cb81 R11: 0000000000000000 R12: ffff88044f71efc8
R13: ffffffffa02b3d20 R14: ffffffffa02b3d90 R15: ffff880459b29308
FS: 00007f5df4d6e8c0(0000) GS:ffff88045d300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055ec51f00a18 CR3: 0000000451782006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
drm_fb_helper_fini+0xd9/0x130
intel_fbdev_destroy+0x12/0x60 [i915]
intel_fbdev_fini+0x28/0x30 [i915]
intel_modeset_cleanup+0x45/0xa0 [i915]
i915_driver_unload+0x92/0x180 [i915]
i915_pci_remove+0x19/0x30 [i915]
i915_driver_unload+0x92/0x180 [i915]
i915_pci_remove+0x19/0x30 [i915]
pci_device_remove+0x39/0xb0
device_release_driver_internal+0x15d/0x220
driver_detach+0x40/0x80
bus_remove_driver+0x58/0xd0
driver_unregister+0x2c/0x40
pci_unregister_driver+0x36/0xb0
i915_exit+0x1a/0x8b [i915]
SyS_delete_module+0x18c/0x1e0
entry_SYSCALL_64_fastpath+0x1c/0xb1
RIP: 0033:0x7f5df3286287
RSP: 002b:00007fff8e107cc8 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: ffffffff81493a03 RCX: 00007f5df3286287
RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000564c7be02e48
RBP: ffffc90000523f88 R08: 0000000000000000 R09: 0000000000000080
R10: 00007f5df4d6e8c0 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff8e107eb0 R14: 0000000000000000 R15: 0000000000000000
Or a GPF like:
general protection fault: 0000 [#1] PREEMPT SMP
Modules linked in: i915(-) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm vgem ax88179_178
+a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e ptp pps_core prime_numbers i2c_hid
+[last unloaded: snd_hda_intel]
CPU: 0 PID: 82 Comm: kworker/0:1 Tainted: G U W 4.14.0-rc3-CI-CI_DRM_3186+ #1
Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWX1.R00.X104.A03.1709140524 09/14/2017
Workqueue: events intel_dp_modeset_retry_work_fn [i915]
task: ffff88045a5caa40 task.stack: ffffc90000378000
RIP: 0010:drm_setup_crtcs+0x143/0xbf0
RSP: 0018:ffffc9000037bd20 EFLAGS: 00010202
RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000002 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000780 RDI: 00000000ffffffff
RBP: ffffc9000037bdb8 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000780 R11: 0000000000000000 R12: 0000000000000002
R13: ffff88044fbef4e8 R14: 0000000000000780 R15: 0000000000000438
FS: 0000000000000000(0000) GS:ffff88045d200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055ec51ee5168 CR3: 000000044c89d003 CR4: 00000000003606f0
Call Trace:
drm_fb_helper_hotplug_event.part.18+0x7e/0xc0
drm_fb_helper_hotplug_event+0x1a/0x20
intel_fbdev_output_poll_changed+0x1a/0x20 [i915]
drm_kms_helper_hotplug_event+0x27/0x30
intel_dp_modeset_retry_work_fn+0x77/0x80 [i915]
process_one_work+0x233/0x660
worker_thread+0x206/0x3b0
kthread+0x152/0x190
? process_one_work+0x660/0x660
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x27/0x40
Code: 06 00 00 45 8b 45 20 31 db 45 31 e4 45 85 c0 0f 8e 91 06 00 00 44 8b 75 94 44 8b 7d 90 49 8b 45 28 49 63 d4 44 89 f6 41 83 c4 01 <48> 8b 04 d0 44
+89 fa 48 8b 38 48 8b 87 a8 01 00 00 ff 50 20 01
RIP: drm_setup_crtcs+0x143/0xbf0 RSP: ffffc9000037bd20
---[ end trace 08901ff1a77d30c7 ]---
v2:
* Rename it to intel_hpd_poll_fini() and call drm_kms_helper_fini() inside it
as the first step before cancel work (Chris Wilson)
* Add GPF trace in commit message and make the function static (Maarten Lankhorst)
Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 9301397a63b3 ("drm/i915: Implement Link Rate fallback on Link training failure")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tony Cheng <tony.cheng@amd.com>
Cc: Harry Wentland <Harry.wentland@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1509054720-25325-1-git-send-email-manasi.d.navare@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 886c6b8692ba5f71b578097524b3b082e2e02119)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
It turns out that some drivers seem to think it's ok to remap page
ranges from within interrupts and even NMI's. That is definitely not
the case, since the page table build-up is simply not interrupt-safe.
This showed up in the zero-day robot that reported it for the ACPI APEI
GHES ("Generic Hardware Error Source") driver. Normally it had been
hidden by the fact that no page table operations had been needed because
the vmalloc area had been set up by other things.
Apparently due to a recent change to the GHEI driver: commit
77b246b32b2c ("acpi: apei: check for pending errors when probing GHES
entries") 0day actually caught a case during bootup whenthe ioremap
called down to page allocation. But that recent change only showed the
symptom, it wasn't the root cause of the problem.
Hopefully it is limited to just that one driver.
If you need to access random physical memory, you either need to ioremap
in process context, or you need to use the FIXMAP facility to set one
particular fixmap entry to the required mapping - that can be done safely.
Cc: Borislav Petkov <bp@suse.de>
Cc: Len Brown <lenb@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Tyler Baicar <tbaicar@codeaurora.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC host fixes intended for v4.14-rc8:
- renesas_sdhi: fix kernel panic
- tmio: fix swiotlb buffer is full"
* tag 'mmc-v4.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: renesas_sdhi: fix kernel panic in _internal_dmac.c
mmc: tmio: fix swiotlb buffer is full
|
|
We should support this because it would allow easily to collect metrics
for different threads in applications.
Original patch from posted by Jin Yao in here [1].
1. Current output, for example:
root@skl:/tmp# perf stat --per-thread -p 21623
^C
Performance counter stats for process id '21623':
vmstat-21623 0.517479 task-clock (msec) # 0.000 CPUs utilized
vmstat-21623 1 context-switches
vmstat-21623 0 cpu-migrations
vmstat-21623 0 page-faults
vmstat-21623 461,306 cycles
vmstat-21623 630,724 instructions
vmstat-21623 136,265 branches
vmstat-21623 2,520 branch-misses
1.444020756 seconds time elapsed
root@skl:/tmp# perf stat --per-thread --metrics ipc -p 21623
^C
Performance counter stats for process id '21623':
vmstat-21623 631,185 inst_retired.any
vmstat-21623 605,893 cpu_clk_unhalted.thread
1.415679293 seconds time elapsed
2. With this patch, the result would be:
root@skl:/tmp# perf stat --per-thread -p 21623
^C
Performance counter stats for process id '21623':
vmstat-21623 0.533759 task-clock (msec) # 0.000 CPUs utilized
vmstat-21623 1 context-switches # 0.002 M/sec
vmstat-21623 0 cpu-migrations # 0.000 K/sec
vmstat-21623 0 page-faults # 0.000 K/sec
vmstat-21623 473,896 cycles # 0.888 GHz
vmstat-21623 631,072 instructions # 1.33 insn per cycle
vmstat-21623 136,307 branches # 255.372 M/sec
vmstat-21623 2,524 branch-misses # 1.85% of all branches
1.544862861 seconds time elapsed
root@skl:/tmp# perf stat --per-thread --metrics ipc -p 21623
^C
Performance counter stats for process id '21623':
vmstat-21623 1,259,104 inst_retired.any # 1.2 IPC
vmstat-21623 1,056,756 cpu_clk_unhalted.thread
2.040954502 seconds time elapsed
[1] https://marc.info/?l=linux-kernel&m=150777054620511&w=2
Originally-from: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-tr8ntktxmy4qc5769ajg5u6c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf_stat__update_shadow_stats
Move the shadow stats scale computation to the
perf_stat__update_shadow_stats() function, so it's centralized and we
don't forget to do it. It also saves few lines of code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-htg7mmyxv6pcrf57qyo6msid@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding perf_data_file__write function to provide single file write
operation.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c3f9p4xzykr845ktqcek6p4t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add struct perf_data_file to represent a single file within a perf_data
struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c3f9p4xzykr845ktqcek6p4t@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rename struct perf_data_file to perf_data, because we will add the
possibility to have multiple files under perf.data, so the 'perf_data'
name fits better.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-39wn4d77phel3dgkzo3lyan0@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes an objtool regression"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/chacha20 - satisfy stack validation 2.0
|
|
For a file generated by "perf sched record sleep 50":
# perf script --per-event-dump
[ perf script: Wrote 23.121 MB perf.data.sched:sched_switch.dump (206015 samples) ]
[ perf script: Wrote 0.000 MB perf.data.sched:sched_stat_wait.dump (0 samples) ]
[ perf script: Wrote 0.000 MB perf.data.sched:sched_stat_sleep.dump (0 samples) ]
[ perf script: Wrote 0.000 MB perf.data.sched:sched_stat_iowait.dump (0 samples) ]
[ perf script: Wrote 17.680 MB perf.data.sched:sched_stat_runtime.dump (129342 samples) ]
[ perf script: Wrote 0.000 MB perf.data.sched:sched_process_fork.dump (24 samples) ]
[ perf script: Wrote 11.328 MB perf.data.sched:sched_wakeup.dump (106770 samples) ]
[ perf script: Wrote 0.000 MB perf.data.sched:sched_wakeup_new.dump (24 samples) ]
[ perf script: Wrote 2.477 MB perf.data.sched:sched_migrate_task.dump (20434 samples) ]
#
Similar to what is generated by 'perf record'.
Based-on-a-patch-by: yuzhoujian <yuzhoujian@didichuxing.com>
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1508921599-10832-3-git-send-email-yuzhoujian@didichuxing.com
Link: http://lkml.kernel.org/n/tip-xuketkkjuk2c0qz546ypd1u7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When queue_work() is used in irq (not in task context), there is
a potential case that trigger NULL pointer dereference.
----------------------------------------------------------------
worker_thread()
|-spin_lock_irq()
|-process_one_work()
|-worker->current_pwq = pwq
|-spin_unlock_irq()
|-worker->current_func(work)
|-spin_lock_irq()
|-worker->current_pwq = NULL
|-spin_unlock_irq()
//interrupt here
|-irq_handler
|-__queue_work()
//assuming that the wq is draining
|-is_chained_work(wq)
|-current_wq_worker()
//Here, 'current' is the interrupted worker!
|-current->current_pwq is NULL here!
|-schedule()
----------------------------------------------------------------
Avoid it by checking for task context in current_wq_worker(), and
if not in task context, we shouldn't use the 'current' to check the
condition.
Reported-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 8d03ecfe4718 ("workqueue: reimplement is_chained_work() using current_wq_worker()")
Cc: stable@vger.kernel.org # v3.9+
|
|
Pull "mvebu fixes for 4.14 (part 3)" from Gregory CLEMENT:
Fixing an old stability issue on Cortex A9 based mvebu SoC
* tag 'mvebu-fixes-4.14-3' of git://git.infradead.org/linux-mvebu:
ARM: dts: mvebu: pl310-cache disable double-linefill
|
|
Revalidating the disk needs to set the logical block format and capacity,
otherwise it can't figure out if the users modified anything about
the namespace.
Fixes: cdbff4f26bd9 ("nvme: remove nvme_revalidate_ns")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Update the OpenRISC readme to provide some more up-to-date information
on how to get started with OpenRISC. This includes:
- remove references to southpole who no longer are consulting for
OpenRISC (confirmed with Jonas)
- suggested QEMU instead of the old or1ksim as QEMU is well supported
- include instructions on how to get an FPGA board running
Suggested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
The OpenRISC docs have traditionally been in arch/ but that does not
seem like the correct place to be. Move them so they will be more
visible to others. Also update MAINTAINERS to make sure we get
notifications of changes.
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
The OpenRISC team is the maintainer of the irqchip or1k-pic driver under
drivers/irqchip.
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
During reviews of the OpenRISC SMP patch series it was suggested to add
stdout-path to the SMP dts file. Add stdout-path to our other dts files
to be a good example.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
This attempts to instill a bit of paranoia to the code dealing with
the CTO timer. It's believed that this will make the CTO timer more
robust in the case that we're having very long interrupt latencies.
Note that I originally thought that perhaps this patch was being
overly paranoid and wasn't really needed, but then while I was running
mmc_test on an rk3399 board I saw one instance of the message:
dwmmc_rockchip fe320000.dwmmc: Unexpected interrupt latency
I had debug prints in the CTO timer code and I found that it was
running CMD 13 at the time.
...so even though this patch seems like it might be overly paranoid,
maybe it really isn't?
Presumably the bad interrupt latency experienced was due to the fact
that I had serial console enabled as serial console is typically where
I place blame when I see absurdly large interrupt latencies. In this
particular case there was an (unrelated) printout to the serial
console just before I saw the "Unexpected interrupt latency" printout.
...and actually, I managed to even reproduce the problems by running
"iw mlan0 scan > /dev/null" while mmc_test was running. That not only
does a bunch of PCIe traffic but it also (on my system) outputs some
SELinux log spam.
Fixes: 03de19212ea3 ("mmc: dw_mmc: introduce timer for broken command transfer over scheme")
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In the commit 03de19212ea3 ("mmc: dw_mmc: introduce timer for broken
command transfer over scheme") we tried to calculate the expected
hardware command timeout value. Unfortunately that calculation isn't
quite correct in all cases. It used "bus_hz" but, as far as I can
tell, it's supposed to use the card clock. Let's account for the div
value, which is documented as 2x the value stored in the register, or
1 if the register is 0.
NOTE: It's not expected that this will actually fix anything important
since the 10 ms margin added by the function will pretty much dwarf
any calculations. The card clock should be 100 kHz at minimum and:
1000 ms/s * (255 * 2) / 100000 Hz.
Gives us 5.1 ms.
...so really the point of this patch is just to make the code more
"correct" in case anyone ever tries to remove the 10 ms buffer.
Fixes: 03de19212ea3 ("mmc: dw_mmc: introduce timer for broken command transfer over scheme")
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When running with the commit 03de19212ea3 ("mmc: dw_mmc: introduce
timer for broken command transfer over scheme") I found this message
in the log:
Unexpected command timeout, state 7
It turns out that we weren't properly cancelling the new CTO timer in
the case that a voltage switch was done. Let's promote the cancel
into the dw_mci_cmd_interrupt() function to fix this.
Fixes: 03de19212ea3 ("mmc: dw_mmc: introduce timer for broken command transfer over scheme")
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
mt2701/mt2712 has 12bit clock div, which is not compatible with
mt8135/mt8173. and, some additional features will be added in
mt2701/mt2712, so that need distinguish it by comatibale name.
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Change the comptiable for support of multi-platform
Make compatible explicit, as MMC host of mt8173 has difference with
mt8135(mt8173 supports hs400 and hs400_tune),so that need separate
mt8173/mt8135 compatible name.
Add description for reg
Add description for source_cg
Add description for mediatek,latch-ck
Note that source_cg and mediatek,latch-ck are optional for some projects,
eg, MT2701 do not have source_cg, and MT2712 do not need
mediatek,latch-ck
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The following commit:
864c2357ca89 ("perf/core: Do not set cpuctx->cgrp for unscheduled cgroups")
made list_update_cgroup_event() skip setting cpuctx->cgrp if no cgroup event
targets %current's cgroup.
This breaks perf_event's hierarchical support because events which target one
of the ancestors get ignored.
Fix it by using cgroup_is_descendant() test instead of equality.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Cc: stable@vger.kernel.org # v4.9+
Fixes: 864c2357ca89 ("perf/core: Do not set cpuctx->cgrp for unscheduled cgroups")
Link: http://lkml.kernel.org/r/20171028164237.GA972780@devbig577.frc2.facebook.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We keep PCI Ids in sdhci-pci.h and the O2-specific definitions belong in
sdhci-pci-o2micro.c. Move those definitions accordingly. Remove unused O2
definitions in sdhci-pci-core.c. The 3 o2micro external function
declarations might as well be in sdhci-pci.h as well, so move them there
and get rid of sdhci-pci-o2micro.h entirely.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Tidy Intel slot probe functions into one. A single function can be used
because the logic uses hid / uid as necessary to identify devices anyway.
This gets rid of some pointless comments and checks for variables that
cannot possibly be NULL, as well as giving the function a name that
identifies it as specific to Intel controllers.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Make use of acpi_device_uid() instead of open coding.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Implement fallback compatibility strings for R-Car Gen 1, 2 and 3.
In the case of Renesas R-Car hardware we know that there are generations of
SoCs, f.e. Gen 1 and 2. But beyond that its not clear what the relationship
between IP blocks might be. For example, I believe that r8a7790 is older
than r8a7791 but that doesn't imply that the latter is a descendant of the
former or vice versa.
We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.
For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme is being adopted for
drivers for Renesas SoCs.
Also, improve readability by listing the shmobile fallback compatibility
string after the more-specific compatibility strings they provide a
fallback for.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
strings
Add fallback compatibility strings for R-Car Gen 1, 2 and 3.
In the case of Renesas R-Car hardware we know that there are generations of
SoCs, f.e. Gen 1 and 2. But beyond that its not clear what the relationship
between IP blocks might be. For example, I believe that r8a7790 is older
than r8a7791 but that doesn't imply that the latter is a descendant of the
former or vice versa.
We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.
For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme is being adopted for
drivers for Renesas SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Provide an example of the usage of the DT bindings for TMIO
in their documentation. The example given is for the r8a7790 (R-Car H2).
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Parse the new binding and store it in the host struct after doing some
sanity checks. The code is designed to support fixed SD driver type if
we ever need that.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some boards may have to use a certain driver type (or drive strength) to
achieve stable eMMC communication. Describe a binding to set this up via
DT.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Bail out everytime when mmc_regulator_get_supply() returns an errno, not
only when probing gets deferred. This is currently a no-op, because this
function only returns -EPROBE_DEFER or 0 right now. But if it will throw
another error somewhen, it will be for a reason. (This still doesn't change
that getting regulators is optional, so 0 can still mean no regulators
found). So, let us a) be future proof and b) have driver code which is
easier to understand.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Bail out everytime when mmc_regulator_get_supply() returns an errno, not
only when probing gets deferred. This is currently a no-op, because this
function only returns -EPROBE_DEFER or 0 right now. But if it will throw
another error somewhen, it will be for a reason. (This still doesn't change
that getting regulators is optional, so 0 can still mean no regulators
found). So, let us a) be future proof and b) have driver code which is
easier to understand.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Bail out everytime when mmc_regulator_get_supply() returns an errno, not
only when probing gets deferred. This is currently a no-op, because this
function only returns -EPROBE_DEFER or 0 right now. But if it will throw
another error somewhen, it will be for a reason. (This still doesn't change
that getting regulators is optional, so 0 can still mean no regulators
found). So, let us a) be future proof and b) have driver code which is
easier to understand.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Bail out everytime when mmc_regulator_get_supply() returns an errno, not
only when probing gets deferred. This is currently a no-op, because this
function only returns -EPROBE_DEFER or 0 right now. But if it will throw
another error somewhen, it will be for a reason. (This still doesn't change
that getting regulators is optional, so 0 can still mean no regulators
found). So, let us a) be future proof and b) have driver code which is
easier to understand.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Bail out everytime when mmc_regulator_get_supply() returns an errno, not
only when probing gets deferred. This is currently a no-op, because this
function only returns -EPROBE_DEFER or 0 right now. But if it will throw
another error somewhen, it will be for a reason. (This still doesn't change
that getting regulators is optional, so 0 can still mean no regulators
found). So, let us a) be future proof and b) have driver code which is
easier to understand.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Bail out everytime when mmc_regulator_get_supply() returns an errno, not
only when probing gets deferred. This is currently a no-op, because this
function only returns -EPROBE_DEFER or 0 right now. But if it will throw
another error somewhen, it will be for a reason. (This still doesn't change
that getting regulators is optional, so 0 can still mean no regulators
found). So, let us a) be future proof and b) have driver code which is
easier to understand.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Bail out everytime when mmc_regulator_get_supply() returns an errno, not
only when probing gets deferred. This is currently a no-op, because this
function only returns -EPROBE_DEFER or 0 right now. But if it will throw
another error somewhen, it will be for a reason. (This still doesn't change
that getting regulators is optional, so 0 can still mean no regulators
found). So, let us a) be future proof and b) have driver code which is
easier to understand.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Bail out everytime when mmc_regulator_get_supply() returns an errno, not
only when probing gets deferred. This is currently a no-op, because this
function only returns -EPROBE_DEFER or 0 right now. But if it will throw
another error somewhen, it will be for a reason. (This still doesn't change
that getting regulators is optional, so 0 can still mean no regulators
found). So, let us a) be future proof and b) have driver code which is
easier to understand.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Bail out everytime when mmc_regulator_get_supply() returns an errno, not
only when probing gets deferred. This is currently a no-op, because this
function only returns -EPROBE_DEFER or 0 right now. But if it will throw
another error somewhen, it will be for a reason. (This still doesn't change
that getting regulators is optional, so 0 can still mean no regulators
found). So, let us a) be future proof and b) have driver code which is
easier to understand.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Bail out everytime when mmc_regulator_get_supply() returns an errno, not
only when probing gets deferred. This is currently a no-op, because this
function only returns -EPROBE_DEFER or 0 right now. But if it will throw
another error somewhen, it will be for a reason. (This still doesn't change
that getting regulators is optional, so 0 can still mean no regulators
found). So, let us a) be future proof and b) have driver code which is
easier to understand.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Especially, make clear what the return value means.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Accessing register fields generally need mask and shift part.
Defining them separately, like SDHCI_CDNS_HRS06_TUNE_{SHIFT,MASK},
is tedious.
Register fields can be always defined by GENMASK (or, BIT if it it
a single bit). They are nicely handled by FIELD_* macros.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Using PTR_ERR_OR_ZERO() instead of IS_ERR() works, but it's not how
you're supposed to write these conditions.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This has a copy and paste bug so we use "host->fixed_factor_clk" which
is a valid pointer instead of "host->cfg_div_clk" which holds the error
code.
Fixes: ed80a13bb4c4 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Expose emmc revision as part of device attributes.
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The __WARN_printf() function is not portable across architectures
and causes a compile-time error on x86 and others that don't use
the asm-generic version of asm/bug.h:
drivers/mmc/host/sdhci-msm.c: In function 'sdhci_msm_check_power_status':
drivers/mmc/host/sdhci-msm.c:1066:4: error: implicit declaration of function '__WARN_printf'; did you mean '__dev_printk'? [-Werror=implicit-function-declaration]
__WARN_printf("%s: pwr_irq for req: (%d) timed out\n",
^~~~~~~~~~~~~
The change that introduced this error, "mmc: sdhci-msm: Add sdhci msm
register write APIs which wait for pwr irq", likely meant to use
dev_warn(), so I'm changing over to that.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
mmc_regulator_get_supply returns -EPROBE_DEFER if either vmmc or
vqmmc regulators had their probing deferred.
vqmmc regulator is needed by UHS to work properly, therefore this
patch checks the value returned by mmc_regulator_get_supply to
make sure we have a reference to both vmmc and vqmmc (if found in
the DT).
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This error message can go because a) currently nothing else than
EPROBE_DEFER is returned and b) if this is going to change a much more
detailed error message should come from mmc_regulator_get_supply()
anyhow.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add a driver for the SDIO/MMC host found on the Amlogic Meson SoCs. This
is an MMC controller which provides an interface between the application
processor and various memory cards. It supports the SD specification
v2.0 and the eMMC specification v4.41.
The controller provides an internal "mux" which allows connecting up to
three MMC devices to it. Only one device can be used at a time though
since the registers are shared across all devices. The driver takes care
of synchronizing access (similar to the dw_mmc driver).
The maximum supported bus-width is 4-bits.
Amlogic's GPL kernel sources call the corresponding driver "aml_sdio" to
differentiate it from the other MMC controller in (at least the Meson8
and Meson8b) the SoCs (they call the other drivers aml_sdhc and
aml_sdhc_m8, which seem to support a bus-width of up to 8-bits). This
means that there are three different MMC host controller IP blocks from
Amlogic (each of them with completely own register layout and features):
- "SDIO": 1 and 4 bit bus width, support for high-speed modes up to
UHS-I SDR50, part of Meson6, Meson8 and Meson8b (the driver from this
patch targets this controller)
- "SDHC": 1, 4 and 8 bit bus width, compatible with standard iNAND
interface, support for speeds up to HS200 and MMC spec up to version
4.5x, part of Meson8 and Meson8b SoCs (there is no mainline driver
for this controller yet)
- "SDEMMC": 1, 4 and 8 bit bus width, support for speeds up to HS400
and MMC spec up to version 5.0, part of the Meson GX (64-bit) SoCs
(supported by the meson-gx MMC host driver)
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
