| Age | Commit message (Collapse) | Author |
|---|
|
This patch fixes a cachedev registration-time allocation deadlock.
This can deadlock on boot if your initrd auto-registeres bcache devices:
Allocator thread:
[ 720.727614] INFO: task bcache_allocato:3833 blocked for more than 120 seconds.
[ 720.732361] [<ffffffff816eeac7>] schedule+0x37/0x90
[ 720.732963] [<ffffffffa05192b8>] bch_bucket_alloc+0x188/0x360 [bcache]
[ 720.733538] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0
[ 720.734137] [<ffffffffa05302bd>] bch_prio_write+0x19d/0x340 [bcache]
[ 720.734715] [<ffffffffa05190bf>] bch_allocator_thread+0x3ff/0x470 [bcache]
[ 720.735311] [<ffffffff816ee41c>] ? __schedule+0x2dc/0x950
[ 720.735884] [<ffffffffa0518cc0>] ? invalidate_buckets+0x980/0x980 [bcache]
Registration thread:
[ 720.710403] INFO: task bash:3531 blocked for more than 120 seconds.
[ 720.715226] [<ffffffff816eeac7>] schedule+0x37/0x90
[ 720.715805] [<ffffffffa05235cd>] __bch_btree_map_nodes+0x12d/0x150 [bcache]
[ 720.716409] [<ffffffffa0522d30>] ? bch_btree_insert_check_key+0x1c0/0x1c0 [bcache]
[ 720.717008] [<ffffffffa05236e4>] bch_btree_insert+0xf4/0x170 [bcache]
[ 720.717586] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0
[ 720.718191] [<ffffffffa0527d9a>] bch_journal_replay+0x14a/0x290 [bcache]
[ 720.718766] [<ffffffff810cc90d>] ? ttwu_do_activate.constprop.94+0x5d/0x70
[ 720.719369] [<ffffffff810cf684>] ? try_to_wake_up+0x1d4/0x350
[ 720.719968] [<ffffffffa05317d0>] run_cache_set+0x580/0x8e0 [bcache]
[ 720.720553] [<ffffffffa053302e>] register_bcache+0xe2e/0x13b0 [bcache]
[ 720.721153] [<ffffffff81354cef>] kobj_attr_store+0xf/0x20
[ 720.721730] [<ffffffff812a2dad>] sysfs_kf_write+0x3d/0x50
[ 720.722327] [<ffffffff812a225a>] kernfs_fop_write+0x12a/0x180
[ 720.722904] [<ffffffff81225177>] __vfs_write+0x37/0x110
[ 720.723503] [<ffffffff81228048>] ? __sb_start_write+0x58/0x110
[ 720.724100] [<ffffffff812cedb3>] ? security_file_permission+0x23/0xa0
[ 720.724675] [<ffffffff812258a9>] vfs_write+0xa9/0x1b0
[ 720.725275] [<ffffffff8102479c>] ? do_audit_syscall_entry+0x6c/0x70
[ 720.725849] [<ffffffff81226755>] SyS_write+0x55/0xd0
[ 720.726451] [<ffffffff8106a390>] ? do_page_fault+0x30/0x80
[ 720.727045] [<ffffffff816f2cae>] system_call_fastpath+0x12/0x71
The fifo code in upstream bcache can't use the last element in the buffer,
which was the cause of the bug: if you asked for a power of two size,
it'd give you a fifo that could hold one less than what you asked for
rather than allocating a buffer twice as big.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Tested-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: stable@vger.kernel.org
|
|
register_cache() is supposed to return an error string on error so that
register_bcache() will will blkdev_put and cleanup other user counters,
but it does not set 'char *err' when cache_alloc() fails (eg, due to
memory pressure) and thus register_bcache() performs no cleanup.
register_bcache() <----------\ <- no jump to err_close, no blkdev_put()
| |
+->register_cache() | <- fails to set char *err
| |
+->cache_alloc() ---/ <- returns error
This patch sets `char *err` for this failure case so that register_cache()
will cause register_bcache() to correctly jump to err_close and do
cleanup. This was tested under OOM conditions that triggered the bug.
Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: stable@vger.kernel.org
|
|
git://people.freedesktop.org/~airlied/linux
Pull more drm fixes from Dave Airlie:
"Daniel pointed out I'd missed some i915 fixes, and I also found a
single etnaviv fix I missed.
So here they are"
* tag 'drm-fixes-for-4.8-rc3-2' of git://people.freedesktop.org/~airlied/linux:
drm/etnaviv: take GPU lock later in the submit process
drm/i915: Fix modeset handling during gpu reset, v5.
drm/i915: fix aliasing_ppgtt leak
drm/i915: fix WaInsertDummyPushConstPs
drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2
drm/i915/gen9: Give one extra block per line for SKL plane WM calculations
drm/i915: Acquire audio powerwell for HD-Audio registers
drm/i915: Add missing rpm wakelock to GGTT pread
drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake
drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0
drm/i915: Program iboost settings for HDMI/DVI on SKL
drm/i915: Fix iboost setting for DDI with 4 lanes on SKL
drm/i915: Handle ENOSPC after failing to insert a mappable node
drm/i915: Flush GT idle status upon reset
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
- a couple of DT node ref counting fixes
- fix __unflatten_device_tree for PPC PCI hotplug case
- rework marking irq controllers as OF_POPULATED in cases where real
driver is used.
- disable of_platform_default_populate_init on PPC. The change in
initcall order causes problems which need to be sorted out later.
* tag 'devicetree-fixes-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: fix reference counting in of_graph_get_endpoint_by_regs
of/platform: disable the of_platform_default_populate_init() for all the ppc boards
ARM: imx6: mark GPC node as not populated after irq init to probe pm domain driver
of/irq: Mark interrupt controllers as populated before initialisation
drivers/of: Validate device node in __unflatten_device_tree()
of: Delete an unnecessary check before the function call "of_node_put"
|
|
Thread A Thread B
- inode_lock fileA
- inode_lock fileB
- inode_lock fileA
- inode_lock fileB
We may encounter above potential deadlock during moving file range in
concurrent scenario. This patch fixes the issue by using inode_trylock
instead.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Only if two input files are regular files, we allow copying data in
range of them, otherwise, deny it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This reverts commit a2ee0a300344a6da76186129b078113354fe13d2.
When testing with generic/032 of xfstest suit, failure message will be
reported as below:
generic/032 8s ... [failed, exit status 1] - output mismatch (see results/generic/032.out.bad)
--- tests/generic/032.out 2015-01-11 16:52:27.643681072 +0800
+++ results/generic/032.out.bad 2016-08-06 13:44:43.861330500 +0800
@@ -1,5 +1,5 @@
QA output created by 032
-100 iterations
-0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
-*
-0100000
+1: [768..775]: unwritten
+Unwritten extents found!
...
(Run 'diff -u tests/generic/032.out results/generic/032.out.bad' to see the entire diff)
Ran: generic/032
Failures: generic/032
Failed 1 of 1 tests
In write_end(), we should update i_size of inode before unlock page,
otherwise, we will lose newly updated data in following race condition.
Thread A Thread B
- write_end
- unlock page
- writepages
- lock_page
- writepage
if page is out-of-range of file size,
we will skip writting the page.
- update i_size
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
LKP reported -36.3% regression of fsmark.files_per_sec due to this patch.
I've confirmed that fxmark [1] has also slight regression for DWAL.
[1] https://github.com/sslab-gatech/fxmark
This reverts commit ec795418c41850056feb956534edf059dc1155d4.
|
|
Pull documentation fixes from Jonathan Corbet:
"Three small fixes for Sphinx-formatted documentation generation"
* tag '4.8-doc-fixes' of git://git.lwn.net/linux:
doc-rst: customize RTD theme, drop padding of inline literal
docs: kernel-documentation: remove some highlight directives
docs: Set the Sphinx default highlight language to "guess"
|
|
git://anongit.freedesktop.org/drm-intel into drm-fixes
Collection of i915 fixes.
* tag 'drm-intel-fixes-2016-08-15' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Fix modeset handling during gpu reset, v5.
drm/i915: fix aliasing_ppgtt leak
drm/i915: fix WaInsertDummyPushConstPs
drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2
drm/i915/gen9: Give one extra block per line for SKL plane WM calculations
drm/i915: Acquire audio powerwell for HD-Audio registers
drm/i915: Add missing rpm wakelock to GGTT pread
drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake
drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0
drm/i915: Program iboost settings for HDMI/DVI on SKL
drm/i915: Fix iboost setting for DDI with 4 lanes on SKL
drm/i915: Handle ENOSPC after failing to insert a mappable node
drm/i915: Flush GT idle status upon reset
|
|
into drm-fixes
Single GPU recovery fix
* 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux:
drm/etnaviv: take GPU lock later in the submit process
|
|
Register gpd_dev_ops.active_wakeup function to support keep power
during suspend state. And add flag to each power domain to
decide whether keep power during suspend or not.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"An initrd microcode loading fix, and an SMP bootup topology setup fix
to resolve crashes on SGI/UV systems if the BIOS is configured in a
certain way"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Fix __max_logical_packages value setup
x86/microcode/AMD: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Three clocksource driver fixes"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/mips-gic-timer: Make gic_clocksource_of_init() return int
clocksource/drivers/kona: Fix get_counter() error handling
clocksource/drivers/time-armada-370-xp: Fix the clock reference
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Two cputime fixes - hopefully the last ones"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cputime: Resync steal time when guest & host lose sync
sched/cputime: Fix NO_HZ_FULL getrusage() monotonicity regression
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also start/stop filter related fixes, a perf
event read() fix, a fix uncovered by fuzzing, and an uprobes leak fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Check return value of the perf_event_read() IPI
perf/core: Enable mapping of the stop filters
perf/core: Update filters only on executable mmap
perf/core: Fix file name handling for start/stop filters
perf/core: Fix event_function_local()
uprobes: Fix the memcg accounting
perf intel-pt: Fix occasional decoding errors when tracing system-wide
tools: Sync kvm related header files for arm64 and s390
perf probe: Release resources on error when handling exit paths
perf probe: Check for dup and fdopen failures
perf symbols: Fix annotation of objects with debuginfo files
perf script: Don't disable use_callchain if input is pipe
perf script: Show proper message when failed list scripts
perf jitdump: Add the right header to get the major()/minor() definitions
perf ppc64le: Fix build failure when libelf is not present
perf tools mem: Fix -t store option for record command
perf intel-pt: Fix ip compression
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Do not access outside hw cache name arrays (Arnaldo Carvalho de Melo)
- Use addr_location::addr instead of ip for entries when unwinding using
DWARF CFI, fixing the "srcline" information for userspace application
callchains (Milian Wolff)
- Reinstate strlcpy() header guard with __UCLIBC__, fixing the build
with uclibc, detected when building for the ARC architecture (Vineet Gupta)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"Two lockless_dereference() related fixes"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/barriers: Suppress sparse warnings in lockless_dereference()
Revert "drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference"
|
|
We have to check if the values are >= *_MAX, not just >, fix it.
From the bugzilla report:
''In file /tools/perf/util/evsel.c function __perf_evsel__hw_cache_name
it appears that there is a bug that reads beyond the end of the buffer.
The statement "if (type > PERF_COUNT_HW_CACHE_MAX)" allows type to be
equal to the maximum value. Later, when statement "if
(!perf_evsel__is_cache_op_valid(type, op))" is executed, the function
can access array perf_evsel__hw_cache_stat[type] beyond the end of the
buffer.
It appears to me that the statement "if (type > PERF_COUNT_HW_CACHE_MAX)"
should be "if (type >= PERF_COUNT_HW_CACHE_MAX)"
Bug found with Coverity and manual code review. No attempts were made to
execute the code with a maximum type value.''
Committer note:
Testing it:
$ perf record -e $(echo $(perf list cache | cut -d \[ -f1) | sed 's/ /,/g') usleep 1
[ perf record: Woken up 16 times to write data ]
[ perf record: Captured and wrote 0.023 MB perf.data (34 samples) ]
$ perf evlist
L1-dcache-load-misses
L1-dcache-loads
L1-dcache-stores
L1-icache-load-misses
LLC-load-misses
LLC-loads
LLC-store-misses
LLC-stores
branch-load-misses
branch-loads
dTLB-load-misses
dTLB-loads
dTLB-store-misses
dTLB-stores
iTLB-load-misses
iTLB-loads
node-load-misses
node-loads
node-store-misses
node-stores
$ perf list cache
List of pre-defined events (to be used in -e):
L1-dcache-load-misses [Hardware cache event]
L1-dcache-loads [Hardware cache event]
L1-dcache-stores [Hardware cache event]
L1-icache-load-misses [Hardware cache event]
LLC-load-misses [Hardware cache event]
LLC-loads [Hardware cache event]
LLC-store-misses [Hardware cache event]
LLC-stores [Hardware cache event]
branch-load-misses [Hardware cache event]
branch-loads [Hardware cache event]
dTLB-load-misses [Hardware cache event]
dTLB-loads [Hardware cache event]
dTLB-store-misses [Hardware cache event]
dTLB-stores [Hardware cache event]
iTLB-load-misses [Hardware cache event]
iTLB-loads [Hardware cache event]
node-load-misses [Hardware cache event]
node-loads [Hardware cache event]
node-store-misses [Hardware cache event]
node-stores [Hardware cache event]
$
Reported-by: Brian Sweeney <bsweeney@lgsinnovations.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=153351
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf tools build in recent kernels spews splat when cross compiling with uClibc:
| CC util/alias.o
| In file included from tools/perf/util/../ui/../util/cache.h:8:0,
| from tools/perf/util/../ui/helpline.h:7,
| from tools/perf/util/debug.h:8,
| from arch/../util/cpumap.h:9,
| from arch/../util/env.h:5,
| from arch/common.h:4,
| from arch/common.c:3:
| tools/include/linux/string.h:12:15: warning: redundant redeclaration of ‘strlcpy’ [-Wredundant-decls]
| extern size_t strlcpy(char *dest, const char *src, size_t size);
^
This is after commit 61a6445e463a31 ("tools lib: Guard the strlcpy() header with
__GLIBC__").
The problem is uClibc also defines __GLIBC__ for exported headers for
applications. So add that specific check to not trip for uClibc.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petri Gynther <pgynther@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linux-snps-arc@lists.infradead.org
Link: http://lkml.kernel.org/r/1471537703-16439-1-git-send-email-vgupta@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Avoid a literal load with the MMU off on the CPU resume path
(potential inconsistency between cache and RAM)
- Build error with CONFIG_ACPI=n fixed
- Compiler warning in the arch/arm64/mm/dump.c code fixed
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix shift warning in arch/arm64/mm/dump.c
arm64: kernel: avoid literal load of virtual address with MMU off
arm64: Fix NUMA build error when !CONFIG_ACPI
|
|
Pull ARM fixes from Russell King:
"Only three fixes this time:
- Emil found an overflow problem with the memory layout sanity check.
- Ard Biesheuvel noticed that late-allocated page tables (for EFI)
weren't being properly constructed.
- Guenter Roeck reported a problem found on qemu caused by the recent
addr_limit changes"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: fix address limit restoration for undefined instructions
ARM: 8591/1: mm: use fully constructed struct pages for EFI pgd allocations
ARM: 8590/1: sanity_check_meminfo(): avoid overflow on vmalloc_limit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"More hibernation-related material: one fix for a recent regression in
the core, one small cleanup of the x86-64 resume code and a
documentation update.
Specifics:
- Fix a hibernate core regression resulting from uncovering a latent
bug in its implementation of memory bitmaps by a recent commit
(James Morse).
- Use __pa() to compute a physical address in the x86-64 code
finalizing resume from hibernation (Rafael Wysocki).
- Update power management documentation related to system sleep
states to remove outdated information from it and to add a
description of a recently introduced hibernation debug feature to
it (Rafael Wysocki)"
* tag 'pm-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / hibernate: Fix rtree_next_node() to avoid walking off list ends
x86/power/64: Use __pa() for physical address computation
PM / sleep: Update some system sleep documentation
|
|
Pull drm fixes from Dave Airlie:
"Pretty quiet so far:
- a few amdgpu/radeon fixup for pcie pm changes
- a couple of amdgpu fixes
- some build fixes
- printk fix"
* tag 'drm-fixes-for-4.8-rc3' of git://people.freedesktop.org/~airlied/linux:
drm/amdgpu: Change GART offset to 64-bit
drm/mediatek: add ARM_SMCCC dependency
drm/mediatek: add CONFIG_OF dependency
drm/mediatek: add COMMON_CLK dependency
drm/amdgpu: Fix memory trashing if UVD ring test fails
drm/amdgpu: fix vm init error path
drm/amdkfd: print doorbell offset as a hex value
Revert "drm/radeon: work around lack of upstream ACPI support for D3cold"
Revert "drm/amdgpu: work around lack of upstream ACPI support for D3cold"
|
|
Looks like some RV6xx have problems with that.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=97099
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
This reverts commit 65aca64d05b5eaa5ce15e18b458a8d338ddbd478.
The patches for twl6040 MFD and clk missed the merge window and
causing the McPDM driver to never probe since it is put back to
the deferred list because the missing drivers.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After Peter's commit:
331b6d8c7afc ("locking/barriers: Validate lockless_dereference() is used on a pointer type")
... we get a lot of sparse warnings (one for every rcu_dereference, and more)
since the expression here is assigning to the wrong address space.
Instead of validating that 'p' is a pointer this way, instead make
it fail compilation when it's not by using sizeof(*(p)). This will
not cause any sparse warnings (tested, likely since the address
space is irrelevant for sizeof), and will fail compilation when
'p' isn't a pointer type.
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 331b6d8c7afc ("locking/barriers: Validate lockless_dereference() is used on a pointer type")
Link: http://lkml.kernel.org/r/1470909022-687-2-git-send-email-johannes@sipsolutions.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This reverts commit:
fa7d81bb3c269 ("drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference")
As Peter explained:
[...] lockless_dereference() is _stronger_ than READ_ONCE(), not weaker.
[...]
Also, clue is in the name: 'dereference', you don't actually dereference
the pointer here, only load it.
My next patch breaks the compile without this revert, because it assumes
you want to deference and thus also need the struct type visible (which
it isn't here), so revert it.
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1470909022-687-1-git-send-email-johannes@sipsolutions.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
ahci currently insists on an explicit call to pci_intx() before falling
back from MSI or MSI-X to legacy IRQs. As pci_intx() is a no-op if the
command register already contains the right value it seems safe and useful
to add this call to pci_alloc_irq_vectors() so that ahci can just use
pci_alloc_irq_vectors().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
When building with 48-bit VAs and 16K page configuration, it's possible
to get the following warning when building the arm64 page table dumping
code:
arch/arm64/mm/dump.c: In function ‘walk_pud’:
arch/arm64/mm/dump.c:274:102: warning: right shift count >= width of type [-Wshift-count-overflow]
This is because pud_offset(pgd, 0) performs a shift to the right by 36
while the value 0 has the type 'int' by default, therefore 32-bit.
This patch modifies all the p*_offset() uses in arch/arm64/mm/dump.c to
use 0UL for the address argument.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/ARM Fixes for v4.8-rc3
This tag contains the following fixes on top of v4.8-rc1:
- ITS init issues
- ITS error handling issues
- ITS IRQ leakage fix
- Plug a couple of ITS race conditions
- An erratum workaround for timers
- Some removal of misleading use of errors and comments
- A fix for GICv3 on 32-bit guests
|
|
When the host supported TSC scaling, L2 would use a TSC multiplier of
0, which causes a VM entry failure. Now L2's TSC uses the same
multiplier as L1.
Signed-off-by: Peter Feiner <pfeiner@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If vmcs12 does not intercept APIC_BASE writes, then KVM will handle the
write with vmcs02 as the current VMCS.
This will incorrectly apply modifications intended for vmcs01 to vmcs02
and L2 can use it to gain access to L0's x2APIC registers by disabling
virtualized x2APIC while using msr bitmap that assumes enabled.
Postpone execution of vmx_set_virtual_x2apic_mode until vmcs01 is the
current VMCS. An alternative solution would temporarily make vmcs01 the
current VMCS, but it requires more care.
Fixes: 8d14695f9542 ("x86, apicv: add virtual x2apic support")
Reported-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
msr bitmap can be used to avoid a VM exit (interception) on guest MSR
accesses. In some configurations of VMX controls, the guest can even
directly access host's x2APIC MSRs. See SDM 29.5 VIRTUALIZING MSR-BASED
APIC ACCESSES.
L2 could read all L0's x2APIC MSRs and write TPR, EOI, and SELF_IPI.
To do so, L1 would first trick KVM to disable all possible interceptions
by enabling APICv features and then would turn those features off;
nested_vmx_merge_msr_bitmap() only disabled interceptions, so VMX would
not intercept previously enabled MSRs even though they were not safe
with the new configuration.
Correctly re-enabling interceptions is not enough as a second bug would
still allow L1+L2 to access host's MSRs: msr bitmap was shared for all
VMCSs, so L1 could trigger a race to get the desired combination of msr
bitmap and VMX controls.
This fix allocates a msr bitmap for every L1 VCPU, allows only safe
x2APIC MSRs from L1's msr bitmap, and disables msr bitmaps if they would
have to intercept everything anyway.
Fixes: 3af18d9c5fe9 ("KVM: nVMX: Prepare for using hardware MSR bitmap")
Reported-by: Jim Mattson <jmattson@google.com>
Suggested-by: Wincy Van <fanwenyi0529@gmail.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Commit:
57430218317e ("sched/cputime: Count actually elapsed irq & softirq time")
... fixed a bug but also triggered a regression:
On an i5 laptop, 4 pCPUs, 4vCPUs for one full dynticks guest, there are four
CPU hog processes(for loop) running in the guest, I hot-unplug the pCPUs
on host one by one until there is only one left, then observe CPU utilization
via 'top' in the guest, it shows:
100% st for cpu0(housekeeping)
75% st for other CPUs (nohz full mode)
However, w/o this commit it shows the correct 75% for all four CPUs.
When a guest is interrupted for a longer amount of time, missed clock ticks
are not redelivered later. Because of that, we should not limit the amount
of steal time accounted to the amount of time that the calling functions
think have passed.
However, the interval returned by account_other_time() is NOT rounded down
to the nearest jiffy, while the base interval in get_vtime_delta() it is
subtracted from is, so the max cputime limit is required to avoid underflow.
This patch fixes the regression by limiting the account_other_time() from
get_vtime_delta() to avoid underflow, and lets the other three call sites
(in account_other_time() and steal_account_process_time()) account however
much steal time the host told us elapsed.
Suggested-by: Rik van Riel <riel@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Link: http://lkml.kernel.org/r/1471399546-4069-1-git-send-email-wanpeng.li@hotmail.com
[ Improved the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Mike reports:
Roughly 10% of the time, ltp testcase getrusage04 fails:
getrusage04 0 TINFO : Expected timers granularity is 4000 us
getrusage04 0 TINFO : Using 1 as multiply factor for max [us]time increment (1000+4000us)!
getrusage04 0 TINFO : utime: 0us; stime: 179us
getrusage04 0 TINFO : utime: 3751us; stime: 0us
getrusage04 1 TFAIL : getrusage04.c:133: stime increased > 5000us:
And tracked it down to the case where the task simply doesn't get
_any_ [us]time ticks.
Update the code to assume all rtime is utime when we lack information,
thus ensuring a task that elides the tick gets time accounted.
Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Tested-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Fredrik Markstrom <fredrik.markstrom@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: stable@vger.kernel.org # 4.3+
Fixes: 9d7fb0427648 ("sched/cputime: Guarantee stime + utime == rtime")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The call to smp_call_function_single in perf_event_read() may fail if
an invalid or not online CPU index is passed. Warn user if such bug is
present and return error.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1471467307-61171-2-git-send-email-davidcc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
At this time the perf_addr_filter_needs_mmap() function will _not_
return true on a user space 'stop' filter. But stop filters need
exactly the same kind of mapping that range and start filters get.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1468860187-318-4-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Function perf_event_mmap() is called by the MM subsystem each time
part of a binary is loaded in memory. There can be several mapping
for a binary, many times unrelated to the code section.
Each time a section of a binary is mapped address filters are
updated, event when the map doesn't pertain to the code section.
The end result is that filters are configured based on the last map
event that was received rather than the last mapping of the code
segment.
For example if we have an executable 'main' that calls library
'libcstest.so.1.0', and that we want to collect traces on code
that is in that library. The perf cmd line for this scenario
would be:
perf record -e cs_etm// --filter 'filter 0x72c/0x40@/opt/lib/libcstest.so.1.0' --per-thread ./main
Resulting in binaries being mapped this way:
root@linaro-nano:~# cat /proc/1950/maps
00400000-00401000 r-xp 00000000 08:02 33169 /home/linaro/main
00410000-00411000 r--p 00000000 08:02 33169 /home/linaro/main
00411000-00412000 rw-p 00001000 08:02 33169 /home/linaro/main
7fa2464000-7fa2474000 rw-p 00000000 00:00 0
7fa2474000-7fa25a4000 r-xp 00000000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so
7fa25a4000-7fa25b3000 ---p 00130000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so
7fa25b3000-7fa25b7000 r--p 0012f000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so
7fa25b7000-7fa25b9000 rw-p 00133000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so
7fa25b9000-7fa25bd000 rw-p 00000000 00:00 0
7fa25bd000-7fa25be000 r-xp 00000000 08:02 38308 /opt/lib/libcstest.so.1.0
7fa25be000-7fa25cd000 ---p 00001000 08:02 38308 /opt/lib/libcstest.so.1.0
7fa25cd000-7fa25ce000 r--p 00000000 08:02 38308 /opt/lib/libcstest.so.1.0
7fa25ce000-7fa25cf000 rw-p 00001000 08:02 38308 /opt/lib/libcstest.so.1.0
7fa25cf000-7fa25eb000 r-xp 00000000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so
7fa25ef000-7fa25f2000 rw-p 00000000 00:00 0
7fa25f7000-7fa25f9000 rw-p 00000000 00:00 0
7fa25f9000-7fa25fa000 r--p 00000000 00:00 0 [vvar]
7fa25fa000-7fa25fb000 r-xp 00000000 00:00 0 [vdso]
7fa25fb000-7fa25fc000 r--p 0001c000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so
7fa25fc000-7fa25fe000 rw-p 0001d000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so
7ff2ea8000-7ff2ec9000 rw-p 00000000 00:00 0 [stack]
root@linaro-nano:~#
Before 'main()' can execute 'libcstest.so.1.0' has to be loaded in
memory. Once that has been done perf_event_mmap() has been called
4 times, with the last map starting at address 0x7fa25ce000 and
the address filter configured to start filtering when the
IP has passed over address 0x0x7fa25ce72c (0x7fa25ce000 + 0x72c).
But that is wrong since the code segment for library 'libcstest.so.1.0'
as been mapped at 0x7fa25bd000, resulting in traces not being
collected.
This patch corrects the situation by requesting that address
filters be updated only if the mapped event is for a code
segment.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1468860187-318-3-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Binary file names have to be supplied for both range and start/stop
filters but the current code only processes the filename if an
address range filter is specified. This code adds processing of
the filename for start/stop filters.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1468860187-318-2-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Vincent reported triggering the WARN_ON_ONCE() in event_function_local().
While thinking through cases I noticed that by using event_function()
directly, we miss the inactive case usually handled by
event_function_call().
Therefore construct a blend of event_function_call() and
event_function() that handles the cases relevant to
event_function_local().
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # 4.5+
Fixes: fae3fde65138 ("perf: Collapse and fix event_function_call() users")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Frank reported kernel panic when he disabled several cores in BIOS
via following option:
Core Disable Bitmap(Hex) [0]
with number 0xFFE, which leaves 16 CPUs in system (out of 48).
The kernel panic below goes along with following messages:
smpboot: Max logical packages: 2^M
smpboot: APIC(0) Converting physical 0 to logical package 0^M
smpboot: APIC(20) Converting physical 1 to logical package 1^M
smpboot: APIC(40) Package 2 exceeds logical package map^M
smpboot: CPU 8 APICId 40 disabled^M
smpboot: APIC(60) Package 3 exceeds logical package map^M
smpboot: CPU 12 APICId 60 disabled^M
...
general protection fault: 0000 [#1] SMP^M
Modules linked in:^M
CPU: 15 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc5+ #1^M
Hardware name: SGI UV300/UV300, BIOS SGI UV 300 series BIOS 05/25/2016^M
task: ffff8801673e0000 ti: ffff8801673ac000 task.ti: ffff8801673ac000^M
RIP: 0010:[<ffffffff81014d54>] [<ffffffff81014d54>] uncore_change_context+0xd4/0x180^M
...
[<ffffffff810158ac>] uncore_event_init_cpu+0x6c/0x70^M
[<ffffffff81d8c91c>] intel_uncore_init+0x1c2/0x2dd^M
[<ffffffff81d8c75a>] ? uncore_cpu_setup+0x17/0x17^M
[<ffffffff81002190>] do_one_initcall+0x50/0x190^M
[<ffffffff810ab193>] ? parse_args+0x293/0x480^M
[<ffffffff81d87365>] kernel_init_freeable+0x1a5/0x249^M
[<ffffffff81d86a35>] ? set_debug_rodata+0x12/0x12^M
[<ffffffff816dc19e>] kernel_init+0xe/0x110^M
[<ffffffff816e93bf>] ret_from_fork+0x1f/0x40^M
[<ffffffff816dc190>] ? rest_init+0x80/0x80^M
The reason for the panic is wrong value of __max_logical_packages,
which lets logical_package_map uninitialized and the uncore code
relying on this map being properly initialized (maybe we should
add some safety checks there as well).
The __max_logical_packages is computed as:
DIV_ROUND_UP(total_cpus, ncpus);
- ncpus being number of cores
With above BIOS setup we get total_cpus == 16 which set
__max_logical_packages to 2 (ncpus is 12).
Once topology_update_package_map processes CPU with logical
pkg over 2 we display above messages and fail to initialize
the physical_to_logical_pkg map, which makes the uncore code
crash.
The fix is to remove logical_package_map bitmap completely
and keep and update the logical_packages number instead.
After we enumerate all the present CPUs, we check if the
enumerated logical packages count is within its computed
maximum from BIOS data.
If it's not the case, we set this maximum to the new enumerated
value and freeze any new addition of logical packages.
The freeze is because lot of init code like uncore/rapl/cqm
depends on having maximum logical package value set to allocate
their data, so we can't change it later on.
Prarit Bhargava tested the patch and confirms that it solves
the problem:
From dmidecode:
Core Count: 24
Core Enabled: 24
Thread Count: 48
Orig kernel boot log:
[ 0.464981] smpboot: Max logical packages: 19
[ 0.469861] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.477261] smpboot: APIC(40) Converting physical 1 to logical package 1
[ 0.484760] smpboot: APIC(80) Converting physical 2 to logical package 2
[ 0.492258] smpboot: APIC(c0) Converting physical 3 to logical package 3
1. nr_cpus=8, should stop enumerating in package 0:
[ 0.533664] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.539596] smpboot: Max logical packages: 19
2. max_cpus=8, should still enumerate all packages:
[ 0.526494] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.532428] smpboot: APIC(40) Converting physical 1 to logical package 1
[ 0.538456] smpboot: APIC(80) Converting physical 2 to logical package 2
[ 0.544486] smpboot: APIC(c0) Converting physical 3 to logical package 3
[ 0.550524] smpboot: Max logical packages: 19
3. nr_cpus=49 ( 2 socket + 1 core on 3rd socket), should stop enumerating in
package 2:
[ 0.521378] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.527314] smpboot: APIC(40) Converting physical 1 to logical package 1
[ 0.533345] smpboot: APIC(80) Converting physical 2 to logical package 2
[ 0.539368] smpboot: Max logical packages: 19
4. maxcpus=49, should still enumerate all packages:
[ 0.525591] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.531525] smpboot: APIC(40) Converting physical 1 to logical package 1
[ 0.537547] smpboot: APIC(80) Converting physical 2 to logical package 2
[ 0.543579] smpboot: APIC(c0) Converting physical 3 to logical package 3
[ 0.549624] smpboot: Max logical packages: 19
5. kdump (nr_cpus=1) works as well.
Reported-by: Frank Ramsay <framsay@redhat.com>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160815101700.GA30090@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Similar to:
efaad554b4ff ("x86/microcode/intel: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y")
... fix microcode loading from the initrd on AMD by adding the
randomization offset to the microcode patch container within the initrd.
Reported-and-tested-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tip-commits@vger.kernel.org
Link: http://lkml.kernel.org/r/20160817113314.GA19221@nazgul.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
__replace_page() wronlgy calls mem_cgroup_cancel_charge() in "success" path,
it should only do this if page_check_address() fails.
This means that every enable/disable leads to unbalanced mem_cgroup_uncharge()
from put_page(old_page), it is trivial to underflow the page_counter->count
and trigger OOM.
Reported-and-tested-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: stable@vger.kernel.org # 3.17+
Fixes: 00501b531c47 ("mm: memcontrol: rewrite charge API")
Link: http://lkml.kernel.org/r/20160817153629.GB29724@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
into drm-fixes
Single 64-bit gart size fix.
* 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: Change GART offset to 64-bit
|
|
* pm-sleep:
PM / hibernate: Fix rtree_next_node() to avoid walking off list ends
x86/power/64: Use __pa() for physical address computation
PM / sleep: Update some system sleep documentation
|
|
Pull networking fixes from David Miller:
1) Buffers powersave frame test is reversed in cfg80211, fix from Felix
Fietkau.
2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme.
3) Fix some tg3 ethtool logic bugs, and one that would cause no
interrupts to be generated when rx-coalescing is set to 0. From
Satish Baddipadige and Siva Reddy Kallam.
4) QLCNIC mailbox corruption and napi budget handling fix from Manish
Chopra.
5) Fix fib_trie logic when walking the trie during /proc/net/route
output than can access a stale node pointer. From David Forster.
6) Several sctp_diag fixes from Phil Sutter.
7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel.
8) Checksum fixup fixes in bpf from Daniel Borkmann.
9) Memork leaks in nfnetlink, from Liping Zhang.
10) Use after free in rxrpc, from David Howells.
11) Use after free in new skb_array code of macvtap driver, from Jason
Wang.
12) Calipso resource leak, from Colin Ian King.
13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang.
14) Fix bpf non-linear packet write helpers, from Daniel Borkmann.
15) Fix lockdep splats in macsec, from Sabrina Dubroca.
16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF
handling.
17) Various tc-action bug fixes, from CONG Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
net_sched: allow flushing tc police actions
net_sched: unify the init logic for act_police
net_sched: convert tcf_exts from list to pointer array
net_sched: move tc offload macros to pkt_cls.h
net_sched: fix a typo in tc_for_each_action()
net_sched: remove an unnecessary list_del()
net_sched: remove the leftover cleanup_a()
mlxsw: spectrum: Allow packets to be trapped from any PG
mlxsw: spectrum: Unmap 802.1Q FID before destroying it
mlxsw: spectrum: Add missing rollbacks in error path
mlxsw: reg: Fix missing op field fill-up
mlxsw: spectrum: Trap loop-backed packets
mlxsw: spectrum: Add missing packet traps
mlxsw: spectrum: Mark port as active before registering it
mlxsw: spectrum: Create PVID vPort before registering netdevice
mlxsw: spectrum: Remove redundant errors from the code
mlxsw: spectrum: Don't return upon error in removal path
i40e: check for and deal with non-contiguous TCs
ixgbe: Re-enable ability to toggle VLAN filtering
ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths
...
|
|
Cong Wang says:
====================
net_sched: tc action fixes and updates
This patchset fixes a few regressions caused by the previous
code refactor and more. Thanks to Jamal for catching them!
Note, patch 3/7 and 4/7 are not strictly necessary for this patchset,
I just want to carry them together.
---
v4: adjust an indention for Jamal
add two more patches
v3: avoid list for fast path, suggested by Jamal
v2: replace flex_array with regular dynamic array
keep tcf_action_stats_update() in act_api.h
fix macro typos found by Amir
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The act_police uses its own code to walk the
action hashtable, which leads to that we could
not flush standalone tc police actions, so just
switch to tcf_generic_walker() like other actions.
(Joint work from Roman and Cong.)
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jamal reported a crash when we create a police action
with a specific index, this is because the init logic
is not correct, we should always create one for this
case. Just unify the logic with other tc actions.
Fixes: a03e6fe56971 ("act_police: fix a crash during removal")
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
