summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-05-28drm/i915: Reject bind_to_gtt() early if object > apertureChris Wilson
If the object is bigger than the entire aperture, reject it early before evicting everything in a vain attempt to find space. v2: Use E2BIG as suggested by Owain G. Ainsworth. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28drm/i915: Check error code whilst moving buffer to GTT domain.Chris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28drm/i915: Remove spurious warning "Failure to install fence"Chris Wilson
This particular warning is harmless as we emit during the normal pinning process where the batch buffer requires more fences than is available without eviction. Only if we fail to evict enough fences does this become a problem, so include the requested number of fences in the ultimate *error* message. v2: Remember to compile test even trial patches to remove warnings. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28drm/i915: Rebind bo if currently bound with incorrect alignment.Chris Wilson
Whilst pinning the buffer, check that that its current alignment matches the requested alignment. If it does not, rebind. This should clear up any final render errors whilst resuming, for reference: Bug 27070 - [i915] Page table errors with empty ringbuffer https://bugs.freedesktop.org/show_bug.cgi?id=27070 Bug 15502 - render error detected, EIR: 0x00000010 https://bugzilla.kernel.org/show_bug.cgi?id=15502 Bug 13844 - i915 error: "render error detected" https://bugzilla.kernel.org/show_bug.cgi?id=13844 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28drm/i915: Include pitch in set_base debug statement.Chris Wilson
Add the pitch that we about to write into the control register along with the base, offset and coordinates that go into the other control registers. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28drm/i915: Only print "nothing to do" debug message as required.Chris Wilson
If the FBC is already disabled, then we do not even attempt to disable FBC and so there is no point emitting a debug statement at that point, having already emitted one saying why we are disabling FBC. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28drm/i915: Propagate error from unbinding an unfenceable object.Chris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28drm/i915: Avoid nesting of domain changes when setting display planeChris Wilson
Nesting domain changes will cause confusion when trying to interpret the tracepoints describing the sequence of changes for the object, as well as obscuring the order of operations for the reader of the code. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28mac80211: make a function staticJohannes Berg
sparse correctly complains that __ieee80211_get_channel_mode is not static. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-28libertas: fix uninitialized variable warningPrarit Bhargava
Fixes: drivers/net/wireless/libertas/rx.c: In function process_rxed_802_11_packet: drivers/net/wireless/libertas/rx.c:354: error: radiotap_hdr.flags may be used uninitialized in this function Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-28drm/i915: Hold the spinlock whilst resetting unpin_work along error pathChris Wilson
Delay taking the mutex until we need to and ensure that we hold the spinlock when resetting unpin_work on the error path. Also defer the debugging print messages until after we have released the spinlock. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Kristian Høgsberg <krh@bitplanet.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28ath9k: Fix bug in the way "bf_tx_aborted" of struct ath_buf is usedVasanthakumar Thiagarajan
This bug was introduced by the following commit Author: Vasanthakumar Thiagarajan <vasanth@atheros.com> Date: Thu Apr 15 17:38:46 2010 -0400 ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose Wrong buffer is checked for bf_tx_aborted field in ath_tx_num_badfrms(), this may result in a rate scaling with wrong feedback (number of unacked frames in this case). It is the last one in the chain of buffers for an aggregate frame that should be checked. Also it misses the initialization of this field in the buffer, this may lead to a situation where we stop the sw retransmission of failed subframes associated to this buffer. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-28drm/i915: Only print an message if there was an errorChris Wilson
Only report an error if the GPU has actually detected one, otherwise we are just hung. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-05-28ath9k: Fix ath_print in xmit for hardware reset.Justin P. Mattock
ath_print in xmit.c should say "Reseting hardware" instead of Resetting HAL!(since HAL is being fazed out). dmesg shows: [ 8660.899624] ath: Failed to stop TX DMA in 100 msec after killing last frame [ 8660.899676] ath: Unable to stop TxDMA. Reset HAL! Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-28Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Fix leds-gpio openfirmware compile issue leds: Kconfig fixes
2010-05-28tracing: fix for tracepoint API changeStephen Rothwell
Commit 38516ab59fbc5b3bb278cf5e1fe2867c70cff32e ("tracing: Let tracepoints have data passed to tracepoint callbacks") requires this fixup to the powerpc code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-28Merge branch 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linux: ARM: S5PV210: serial: Fix section mismatch warning ARM: s3c2410_defconfig: Add new machines ARM: s3c6400_defconfig: Add framebuffer and basic LCD ARM: s3c6400_defconfig: Add RTC driver support ARM: s3c6400_defconfig: Enable USB host side ARM: s3c6400_defconfig: Add SPI driver ARM: s3c6400_defconfig: Update compiled machines ARM: S5P: Regoster clk_xusbxti clock for hsotg driver ARM: S3C64XX: Add USB OTG HCLK to the list of clocks ARM: SAMSUNG: gpio-cfg.h: update documentation ARM: SAMSUNG: Documentation: add documentation on GPIO code ARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin() ARM: S3C24XX: Documentation: add section on gpiolib changes ARM: S3C24XX: Documentation: update GPIO documentation ARM: S3C24XX: Documentation: update documentation overview ARM: SAMSUNG: Documentation: update directory layout ARM: SAMSUNG: Documentation: update the list of SoCs supported
2010-05-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (22 commits) netlink: bug fix: wrong size was calculated for vfinfo list blob netlink: bug fix: don't overrun skbs on vf_port dump xt_tee: use skb_dst_drop() netdev/fec: fix ifconfig eth0 down hang issue cnic: Fix context memory init. on 5709. drivers/net: Eliminate a NULL pointer dereference drivers/net/hamradio: Eliminate a NULL pointer dereference be2net: Patch removes redundant while statement in loop. ipv6: Add GSO support on forwarding path net: fix __neigh_event_send() vhost: fix the memory leak which will happen when memory_access_ok fails vhost-net: fix to check the return value of copy_to/from_user() correctly vhost: fix to check the return value of copy_to/from_user() correctly vhost: Fix host panic if ioctl called with wrong index net: fix lock_sock_bh/unlock_sock_bh net/iucv: Add missing spin_unlock net: ll_temac: fix checksum offload logic net: ll_temac: fix interrupt bug when interrupt 0 is used sctp: dubious bitfields in sctp_transport ipmr: off by one in __ipmr_fill_mroute() ...
2010-05-28FRV: ARCH_KMALLOC_MINALIGN was already definedDavid Howells
ARCH_KMALLOC_MINALIGN was already defined in asm/mem-layout.h and so shouldn't have been added to asm/cache.h as well, but rather altered in place. The commit that added it to asm/cache.h was: commit 69dcf3db03626c4f18de624e8632454ea12ff260 Author: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Date: Mon May 24 14:32:54 2010 -0700 frv: set ARCH_KMALLOC_MINALIGN Architectures that handle DMA-non-coherent memory need to set ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the buffer doesn't share a cache with the others. Signed-off-by: David Howells <dhowells@redhat.com> cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-28Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: posix_timer: Fix error path in timer_create hrtimer: Avoid double seqlock timers: Move local variable into else section timers: Fix slack calculation really
2010-05-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: remove detritus left by "mm: make read_cache_page synchronous" fix fs/sysv s_dirt handling fat: convert to use the new truncate convention. ext2: convert to use the new truncate convention. tmpfs: convert to use the new truncate convention fs: convert simple fs to new truncate kill spurious reference to vmtruncate fs: introduce new truncate sequence fs/super: fix kernel-doc warning fs/minix: bugfix, number of indirect block ptrs per block depends on block size rename the generic fsync implementations drop unused dentry argument to ->fsync fs: Add missing mutex_unlock Fix racy use of anon_inode_getfd() in perf_event.c get rid of the magic around f_count in aio VFS: fix recent breakage of FS_REVAL_DOT Revert "anon_inode: set S_IFREG on the anon_inode"
2010-05-28remove detritus left by "mm: make read_cache_page synchronous"Al Viro
gets minix get_dir_page() in sync with its analogs; back in 2007 Nick has switched read_cache_page() and friends to sync behaviour (i.e. they wait for the page to get unlocked, check if it's uptodate and if it isn't return ERR_PTR(-EIO) instead) and removed the duplicate logics from the callers. In case of fs/minix/dir.c he'd removed only half of that... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-28kconfig: Hide error output in find command in streamline_config.plToralf Förster
Finding the list of Makefiles in streamline-config should not report errors. Also move the "chomp" to the @makefiles array instead of doing it in the for loop. This is more efficient, and does not make it any less readable by C programmers. Signed-off-by: Toralf Foerster <toralf.foerster@gmx.de> LKML-Reference: <201005262022.02928.toralf.foerster@gmx.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-28kconfig: Fix typo in comment in streamline_config.plToralf Foerster
Signed-off-by: Toralf Foerster <toralf.foerster@gmx.de> LKML-Reference: <201005281025.52753.toralf.foerster@gmx.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-28kconfig: Make a variable local in streamline_config.plToralf Foerster
Proper perl requires that local variables should be declared with 'my', otherwise this may produce errors. Signed-off-by: Toralf Foerster <toralf.foerster@gmx.de> LKML-Reference: <201005281025.00358.toralf.foerster@gmx.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-28netlink: bug fix: wrong size was calculated for vfinfo list blobScott Feldman
The wrong size was being calculated for vfinfo. In one case, it was over- calculating using nlmsg_total_size on attrs, in another case, it was under-calculating by assuming ifla_vf_* structs are packed together, but each struct is it's own attr w/ hdr (and padding). Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-28netlink: bug fix: don't overrun skbs on vf_port dumpScott Feldman
Noticed by Patrick McHardy: was continuing to fill skb after a nla_put_failure, ignoring the size calculated by upper layer. Now, return -EMSGSIZE on any overruns, but also allow netdev to fail ndo_get_vf_port with error other than -EMSGSIZE, thus unwinding nest. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-28xt_tee: use skb_dst_drop()Eric Dumazet
After commit 7fee226a (net: add a noref bit on skb dst), its wrong to use : dst_release(skb_dst(skb)), since we could decrement a refcount while skb dst was not refcounted. We should use skb_dst_drop(skb) instead. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-28netdev/fec: fix ifconfig eth0 down hang issueBryan Wu
BugLink: http://bugs.launchpad.net/bugs/559065 In fec open/close function, we need to use phy_connect and phy_disconnect operation before we start/stop phy. Otherwise it will cause system hang. Only call fec_enet_mii_probe() in open function, because the first open action will cause NULL pointer error. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-28ARM: S5PV210: serial: Fix section mismatch warningMarek Szyprowski
Rename the structure to avoid the following warning: WARNING: drivers/serial/built-in.o(.data+0x534): Section mismatch in reference from the variable s5p_serial_drv to the function .devexit.text:s3c24xx_serial_remove() The variable s5p_serial_drv references the function __devexit s3c24xx_serial_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: Merge for-2635/defconfig3Ben Dooks
Merge branch 'for-2635/defconfig3' into for-linus/2635-updates
2010-05-28ARM: s3c2410_defconfig: Add new machinesBen Dooks
Add the SMDK2416, and the GTA02 to the list of machines that are included in the s3c2410_defconfig. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: s3c6400_defconfig: Add framebuffer and basic LCDBen Dooks
Add the framebuffer driver and some basic LCD configurations that should be suitable for the SMDK boards. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: s3c6400_defconfig: Add RTC driver supportBen Dooks
Now that the RTC driver supports the S3C64XX, enable it in the build. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: s3c6400_defconfig: Enable USB host sideBen Dooks
Enable the USB Host side by adding the USB OHCI and some basic USB driver modules. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: s3c6400_defconfig: Add SPI driverBen Dooks
The SPI driver was added last kernel round, so enable the core SPI and add the 64XX and bitbang driver as modules. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: s3c6400_defconfig: Update compiled machinesBen Dooks
Add the machines that have been added in the last round to the list of builds. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: S5P: Regoster clk_xusbxti clock for hsotg driverThomas Abraham
The clk_xusbxti clock is added to the list of clocks to be registred during boot time clock registration. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> [ben-linux@fluff.org: edited title] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: S3C64XX: Add USB OTG HCLK to the list of clocksThomas Abraham
Add the USB OTG HCLK clock to the list of clocks to be registered during initialization. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: SAMSUNG: gpio-cfg.h: update documentationBen Dooks
Update the documentation on the gpio configuration calls to add more references to useful information and also to document the values that are passed. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: SAMSUNG: Documentation: add documentation on GPIO codeBen Dooks
Add some documentation in Documentation/arm/Samsung for the GPIO code and where to look for the necessary functions. Update the S3C24XX case as well. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin()Ben Dooks
Fix typo in s3c_gpio_cfgpin() documentation, the second argument is @to not @pin again. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: S3C24XX: Documentation: add section on gpiolib changesBen Dooks
Add section to the S3C24XX GPIO documentation on the recent changes to move towards gpiolib integration. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: S3C24XX: Documentation: update GPIO documentationBen Dooks
Upate the S3C24XX GPIO documentation after the changes for gpiolib and show which calls are being replaced by gpiolib or the new s3c generic calls. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: S3C24XX: Documentation: update documentation overviewBen Dooks
Add the two new SoCs added in this release cycle and update the notes on the gpiolib conversion. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: SAMSUNG: Documentation: update directory layoutBen Dooks
Update the directory layout in Documentation/arm/Samsung/Overview.txt to reflect the changes that have been made in the latest kernel updates. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28ARM: SAMSUNG: Documentation: update the list of SoCs supportedBen Dooks
Update the list of SoCs supported for the plat-s5p range. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28cnic: Fix context memory init. on 5709.Michael Chan
We need to zero context memory on 5709 in the function cnic_init_context(). Without this, iscsid restart on 5709 will not work because of stale data. TX context blocks should not be initialized by cnic_init_context() because of the special remapping on 5709. Update version to 2.1.2. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-28drivers/net: Eliminate a NULL pointer dereferenceJulia Lawall
At the point of the print, dev is NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E,E1; identifier f; statement S1,S2,S3; @@ if ((E == NULL && ...) || ...) { ... when != if (...) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-28drivers/net/hamradio: Eliminate a NULL pointer dereferenceJulia Lawall
At the point of the print, dev is NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E,E1; identifier f; statement S1,S2,S3; @@ if ((E == NULL && ...) || ...) { ... when != if (...) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 18:15:46 +0000