summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-25i40e: allow ethtool to report SW and FW versions in recovery modePiotr Kwapulinski
Let ethtool print driver and firmware versions when NIC is in recovery mode. Assign i40e_get_drvinfo() operation to ethtool recovery mode operations. Previously ethtool did not report driver and firmware versions when NIC was in recovery mode. Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-25i40e: initialize ITRN registers with correct valuesNicholas Nunley
Since commit 92418fb14750 ("i40e/i40evf: Use usec value instead of reg value for ITR defines") the driver tracks the interrupt throttling intervals in single usec units, although the actual ITRN/ITR0 registers are programmed in 2 usec units. Most register programming flows in the driver correctly handle the conversion, although it is currently not applied when the registers are initialized to their default values. Most of the time this doesn't present a problem since the default values are usually immediately overwritten through the standard adaptive throttling mechanism, or updated manually by the user, but if adaptive throttling is disabled and the interval values are left alone then the incorrect value will persist. Since the intended default interval of 50 usecs (vs. 100 usecs as programmed) performs better for most traffic workloads, this can lead to performance regressions. This patch adds the correct conversion when writing the initial values to the ITRN registers. Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-25i40e: Extend PHY access with page change flagPiotr Azarewicz
Currently FW use MDIO I/F number corresponded with current PF for PHY access. This code allow to specify used MDIO I/F number. Add new field - command flags with only one flag for now. Added flag tells FW that it shouldn't change page while accessing QSFP module, as it was set manually. Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-25i40e: Extract detection of HW flags into a functionPiotr Azarewicz
Move code detecting HW flags based on device type and FW API version into a single function. Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-25i40e: Wrong 'Advertised FEC modes' after set FEC to AUTOJaroslaw Gawin
Fix display of parameters "Configured FEC encodings:" and "Advertised FEC modes:" in ethtool. Implemented by setting proper FEC bits in “advertising” bitmask of link_modes struct and “fec” bitmask in ethtool_fecparam struct. Without this patch wrong FEC settings can be shown. Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-25i40e: Fix for persistent lldp supportSylwia Wnuczko
This patch fixes function to read NVM module data and uses it to read current LLDP agent configuration from NVM API version 1.8. Signed-off-by: Sylwia Wnuczko <sylwia.wnuczko@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-25nbd: verify socket is supported during setupMike Christie
nbd requires socket families to support the shutdown method so the nbd recv workqueue can be woken up from its sock_recvmsg call. If the socket does not support the callout we will leave recv works running or get hangs later when the device or module is removed. This adds a check during socket connection/reconnection to make sure the socket being passed in supports the needed callout. Reported-by: syzbot+24c12fa8d218ed26011a@syzkaller.appspotmail.com Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs") Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25ata: libahci_platform: Fix regulator_get_optional() misuseMark Brown
This driver is using regulator_get_optional() to handle all the supplies that it handles, and only ever enables and disables all supplies en masse without ever doing any other configuration of the device to handle missing power. These are clear signs that the API is being misused - it should only be used for supplies that may be physically absent from the system and in these cases the hardware usually needs different configuration if the supply is missing. Instead use normal regualtor_get(), if the supply is not described in DT then the framework will substitute a dummy regulator in so no special handling is needed by the consumer driver. In the case of the PHY regulator the handling in the driver is a hack to deal with integrated PHYs; the supplies are only optional in the sense that that there's some confusion in the code about where they're bound to. From a code point of view they function exactly as normal supplies so can be treated as such. It'd probably be better to model this by instantiating a PHY object for integrated PHYs. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25nbd: handle racing with error'ed out commandsJosef Bacik
We hit the following warning in production print_req_error: I/O error, dev nbd0, sector 7213934408 flags 80700 ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 25 PID: 32407 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60 Workqueue: knbd-recv recv_work [nbd] RIP: 0010:refcount_sub_and_test_checked+0x53/0x60 Call Trace: blk_mq_free_request+0xb7/0xf0 blk_mq_complete_request+0x62/0xf0 recv_work+0x29/0xa1 [nbd] process_one_work+0x1f5/0x3f0 worker_thread+0x2d/0x3d0 ? rescuer_thread+0x340/0x340 kthread+0x111/0x130 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x1f/0x30 ---[ end trace b079c3c67f98bb7c ]--- This was preceded by us timing out everything and shutting down the sockets for the device. The problem is we had a request in the queue at the same time, so we completed the request twice. This can actually happen in a lot of cases, we fail to get a ref on our config, we only have one connection and just error out the command, etc. Fix this by checking cmd->status in nbd_read_stat. We only change this under the cmd->lock, so we are safe to check this here and see if we've already error'ed this command out, which would indicate that we've completed it as well. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25nbd: protect cmd->status with cmd->lockJosef Bacik
We already do this for the most part, except in timeout and clear_req. For the timeout case we take the lock after we grab a ref on the config, but that isn't really necessary because we're safe to touch the cmd at this point, so just move the order around. For the clear_req cause this is initiated by the user, so again is safe. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25Merge tag 'modules-for-v5.4-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules fixes from Jessica Yu: - Revert __ksymtab_$namespace.$symbol naming scheme back to __ksymtab_$symbol, as it was causing issues with depmod. Instead, have modpost extract a symbol's namespace from __kstrtabns and __ksymtab_strings. - Fix `make nsdeps` for out of tree kernel builds (make O=...) caused by unescaped '/'. Use a different sed delimiter to avoid this problem. * tag 'modules-for-v5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: scripts/nsdeps: use alternative sed delimiter symbol namespaces: revert to previous __ksymtab name scheme modpost: make updating the symbol namespace explicit modpost: delegate updating namespaces to separate function
2019-10-25Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A slightly larger set of fixes have accrued in the last two weeks. Mostly a collection of the usual smaller fixes: - Marvell Armada: USB phy setup issues on Turris Mox - Broadcom: GPIO/pinmux DT mapping corrections for Stingray, MMC bus width fix for RPi Zero W, GPIO LED removal for RPI CM3. Also some maintainer updates. - OMAP: Fixlets for display config, interrupt settings for wifi, some clock/PM pieces. Also IOMMU regression fix and a ti-sysc no-watchdog regression fix. - i.MX: A few fixes around PM/settings, some devicetree fixlets and catching up with config option changes in DRM - Rockchip: RockRro64 misc DT fixups, Hugsun X99 USB-C, Kevin display panel settings ... and some smaller fixes for Davinci (backlight, McBSP DMA), Allwinner (phy regulators, PMU removal on A64, etc)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits) ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157 MAINTAINERS: Update the Spreadtrum SoC maintainer MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue bus: ti-sysc: Fix watchdog quirk handling ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs ARM: davinci_all_defconfig: enable GPIO backlight ARM: davinci: dm365: Fix McBSP dma_slave_map entry ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk ARM: dts: imx7s: Correct GPT's ipg clock source ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect' ARM: dts: imx6q-logicpd: Re-Enable SNVS power key arm64: dts: lx2160a: Correct CPU core idle state name mailmap: Add Simon Arlott (replacement for expired email address) arm64: dts: rockchip: Fix override mode for rk3399-kevin panel ...
2019-10-25Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Bugfixes for ARM, PPC and x86, plus selftest improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: nVMX: Don't leak L1 MMIO regions to L2 KVM: SVM: Fix potential wrong physical id in avic_handle_ldr_update kvm: clear kvmclock MSR on reset KVM: x86: fix bugon.cocci warnings KVM: VMX: Remove specialized handling of unexpected exit-reasons selftests: kvm: fix sync_regs_test with newer gccs selftests: kvm: vmx_dirty_log_test: skip the test when VMX is not supported selftests: kvm: consolidate VMX support checks selftests: kvm: vmx_set_nested_state_test: don't check for VMX support twice KVM: Don't shrink/grow vCPU halt_poll_ns if host side polling is disabled selftests: kvm: synchronize .gitignore to Makefile kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUID KVM: arm64: pmu: Reset sample period on overflow handling KVM: arm64: pmu: Set the CHAINED attribute before creating the in-kernel event arm64: KVM: Handle PMCR_EL0.LC as RES1 on pure AArch64 systems KVM: arm64: pmu: Fix cycle counter truncation KVM: PPC: Book3S HV: XIVE: Ensure VP isn't already in use
2019-10-25Merge tag 'drm-fixes-2019-10-25' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Quiet week this week, which I suspect means some people just didn't get around to sending me fixes pulls in time. This has 2 komeda and a bunch of amdgpu fixes in it: komeda: - typo fixes - flushing pipes fix amdgpu: - Fix suspend/resume issue related to multi-media engines - Fix memory leak in user ptr code related to hmm conversion - Fix possible VM faults when allocating page table memory - Fix error handling in bo list ioctl" * tag 'drm-fixes-2019-10-25' of git://anongit.freedesktop.org/drm/drm: drm/komeda: Fix typos in komeda_splitter_validate drm/komeda: Don't flush inactive pipes drm/amdgpu/vce: fix allocation size in enc ring test drm/amdgpu: fix error handling in amdgpu_bo_list_create drm/amdgpu: fix potential VM faults drm/amdgpu: user pages array memory leak fix drm/amdgpu/vcn: fix allocation size in enc ring test drm/amdgpu/uvd7: fix allocation size in enc ring test (v2) drm/amdgpu/uvd6: fix allocation size in enc ring test (v2)
2019-10-25Merge tag 'mmc-v5.4-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC host fixes: - mxs: Fix flags passed to dmaengine_prep_slave_sg - cqhci: Add a missing memory barrier - sdhci-omap: Fix tuning procedure for temperatures < -20C" * tag 'mmc-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mxs: fix flags passed to dmaengine_prep_slave_sg mmc: cqhci: Commit descriptors before setting the doorbell mmc: sdhci-omap: Fix Tuning procedure for temperatures < -20C
2019-10-25io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREADJens Axboe
We currently assume that submissions from the sqthread are successful, and if IO polling is enabled, we use that value for knowing how many completions to look for. But if we overflowed the CQ ring or some requests simply got errored and already completed, they won't be available for polling. For the case of IO polling and SQTHREAD usage, look at the pending poll list. If it ever hits empty then we know that we don't have anymore pollable requests inflight. For that case, simply reset the inflight count to zero. Reported-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25io_uring: used cached copies of sq->dropped and cq->overflowJens Axboe
We currently use the ring values directly, but that can lead to issues if the application is malicious and changes these values on our behalf. Created in-kernel cached versions of them, and just overwrite the user side when we update them. This is similar to how we treat the sq/cq ring tail/head updates. Reported-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157Patrice Chotard
Relax qspi pins slew-rate to minimize peak currents. Fixes: 844030057339 ("ARM: dts: stm32: add flash nor support on stm32mp157c eval board") Link: https://lore.kernel.org/r/20191025130122.11407-1-alexandre.torgue@st.com Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-25io_uring: Fix race for sqes with userspacePavel Begunkov
io_ring_submit() finalises with 1. io_commit_sqring(), which releases sqes to the userspace 2. Then calls to io_queue_link_head(), accessing released head's sqe Reorder them. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25io_uring: Fix broken links with offloadingPavel Begunkov
io_sq_thread() processes sqes by 8 without considering links. As a result, links will be randomely subdivided. The easiest way to fix it is to call io_get_sqring() inside io_submit_sqes() as do io_ring_submit(). Downsides: 1. This removes optimisation of not grabbing mm_struct for fixed files 2. It submitting all sqes in one go, without finer-grained sheduling with cq processing. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25io_uring: Fix corrupted user_dataPavel Begunkov
There is a bug, where failed linked requests are returned not with specified @user_data, but with garbage from a kernel stack. The reason is that io_fail_links() uses req->user_data, which is uninitialised when called from io_queue_sqe() on fail path. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25xen: issue deprecation warning for 32-bit pv guestJuergen Gross
Support for the kernel as Xen 32-bit PV guest will soon be removed. Issue a warning when booted as such. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2019-10-25Merge tag 'irqchip-fixes-5.4-2' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull the second lot of irqchip updates for 5.4 from Marc Zyngier: - Sifive PLIC: force driver to skip non-relevant contexts - GICv4: Don't send VMOVP commands to ITSs that don't have this vPE mapped
2019-10-25kvm: Allocate memslots and buses before calling kvm_arch_init_vmJim Mattson
This reorganization will allow us to call kvm_arch_destroy_vm in the event that kvm_create_vm fails after calling kvm_arch_init_vm. Suggested-by: Junaid Shahid <junaids@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-25irqchip/sifive-plic: Skip contexts except supervisor in plic_init()Alan Mikhak
Modify plic_init() to skip .dts interrupt contexts other than supervisor external interrupt. The .dts entry for plic may specify multiple interrupt contexts. For example, it may assign two entries IRQ_M_EXT and IRQ_S_EXT, in that order, to the same interrupt controller. This patch modifies plic_init() to skip the IRQ_M_EXT context since IRQ_S_EXT is currently the only supported context. If IRQ_M_EXT is not skipped, plic_init() will report "handler already present for context" when it comes across the IRQ_S_EXT context in the next iteration of its loop. Without this patch, .dts would have to be edited to replace the value of IRQ_M_EXT with -1 for it to be skipped. Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # arch/riscv Link: https://lkml.kernel.org/r/1571933503-21504-1-git-send-email-alan.mikhak@sifive.com
2019-10-25ACPI: processor: Add QoS requests for all CPUsRafael J. Wysocki
The _PPC change notifications from the platform firmware are per-CPU, so acpi_processor_ppc_init() needs to add a frequency QoS request for each CPU covered by a cpufreq policy to take all of them into account. Even though ACPI thermal control of CPUs sets frequency limits per processor package, it also needs a frequency QoS request for each CPU in a cpufreq policy in case some of them are taken offline and the frequency limit needs to be set through the remaining online ones (this is slightly excessive, because all CPUs covered by one cpufreq policy will set the same frequency limit through their QoS requests, but it is not incorrect). Modify the code in accordance with the above observations. Fixes: d15ce412737a ("ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-10-25Merge tag 'iwlwifi-next-for-kalle-2019-10-18-2' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Patches intended for v5.5 * Revamp the debugging infrastructure; * Some udpdates to FW API commands; * Fix max amsdu value calculation; * Small updates in the debugging infra; * Some new helper functions; * A few clean-ups; * Other small fixes and improvements;
2019-10-25rtw88: fix GENMASK_ULL for u64Yan-Hsuan Chuang
This fixes compile warning: In file included from include/linux/bitops.h:5:0, from include/linux/kernel.h:12, from include/asm-generic/bug.h:19, from arch/mips/include/asm/bug.h:42, from include/linux/bug.h:5, from include/net/mac80211.h:16, from drivers/net/wireless/realtek/rtw88/main.h:8, from drivers/net/wireless/realtek/rtw88/main.c:5: drivers/net/wireless/realtek/rtw88/main.c: In function 'rtw_update_rate_mask': include/linux/bits.h:23:11: warning: right shift count is negative [-Wshift-count-negative] (~UL(0) >> (BITS_PER_LONG - 1 - (h)))) ^ drivers/net/wireless/realtek/rtw88/main.c:622:17: note: in expansion of macro 'GENMASK' u64 cfg_mask = GENMASK(63, 0); ^~~~~~~ Reported-by: kbuild test robot <lkp@intel.com> Fixes: f39e9bd49a3d ("rtw88: add set_bitrate_mask support") Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-25iwlwifi: rx: use new api to get band from rx mpduTova Mussai
The FW introduce new API to get the band from the rx mpdu, use this new API. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: nvm: create function to convert channel index to nl80211_bandTova Mussai
Create function to convert channel index to nl80211_band and use it. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: mvm: Invert the condition for OFDM rateTova Mussai
OFDM rate used for all bands except to band 2.4 which use CCK rate. Inverting the condition help that in future we won't need to expand the condition for more bands. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: mvm: create function to convert nl80211 band to phy bandTova Mussai
Create the function and use it. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: use vzalloc to allocate dumping memory regionsShahar S Matityahu
During dump flow, the driver allocates spaces to store the memory regions that will be included in the dump. These regions can be very large so in order to avoid allocation failure, use vzalloc instead. The kmalloc uses GFP_KERNEL and the driver does not make any use of the fact that the memory is contiguous so the same functionality is maintained. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: add user trigger supportShahar S Matityahu
Allow to fire user trigger in ini mode Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: mvm: add notification for missed VAPLior Cohen
A missed VAP notification will be sent from umac when the station is out of sync with its associated non-transmitted BSSID. The notification will be sent only if the transmitted BSSID is an EMA-AP one. The driver will consider this notification as connection loss. Signed-off-by: Lior Cohen <lior2.cohen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: mvm: fix old-style declarationYueHaibing
There expect the 'static' keyword to come first in a declaration, and we get warnings like this with "make W=1": drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c:427:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration] drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c:434:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: mvm: use the new session protection commandEmmanuel Grumbach
The firmware has now a new session protection command. This new API allows the firmware to manage the protection needed for association. It'll also remove the event when the association is complete. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: mvm: remove leftover rs_remove_sta_debugfs() prototypeJohannes Berg
This prototype is no longer used, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: mvm: add support for new version for D0I3_END_CMDHaim Dreyfuss
During D3 state there are some flows which requires FW reset. Add new API to support it. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: mvm: consider ieee80211 station max amsdu valueMordechay Goodstein
debugfs amsdu_len sets only the max_amsdu_len for ieee80211 station so take it into consideration while getting max amsdu Fixes: af2984e9e625 ("iwlwifi: mvm: add a debugfs entry to set a fixed size AMSDU for all TX packets") Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: support FW notification dumping in case of missed beaconShahar S Matityahu
Pass the FW notification packet to the dump collection flow to allow the driver to include it in the dump file if requested. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: remove old API and some related codeShahar S Matityahu
Remove unused code of the old debug ini API. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: rename external debug configuration fileShahar S Matityahu
Rename the external configuration file to align to the debug SAS. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: support FW response/notification region typeShahar S Matityahu
Allow the driver to collect FW response/notification region type during dump and allow triggering dump collection for a given FW response/notification. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: support domain changing via debugfsShahar S Matityahu
Allow to change or read the debug domain bitmap at runtime via fw_dbg_domain debugfs. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: add periodic trigger new API supportShahar S Matityahu
Enable periodic trigger. Allows the driver to trigger dump collection in constant intervals. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: implement monitor allocation flowShahar S Matityahu
Allow allocating fragmented buffers for several allocation IDs. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: implement time point handlingShahar S Matityahu
Calculate active triggers list and implement time points handling. Also allow to override the debug domain via iwl-dbg-cfg.ini by setting FW_DBG_DOMAIN field. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: add TLV allocation new API supportShahar S Matityahu
Add new debug TLVs API preprocessing. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-10-25iwlwifi: dbg_ini: use new API in dump infoShahar S Matityahu
Make dump info region use new API. debug_info_tlv_list list will be initialize in a future patch once the driver will start using it. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit (git 2.34.1) at 2025-09-14 01:05:54 +0000