| Age | Commit message (Collapse) | Author |
|---|
|
Now that we explicitly define each register field width there is no
need to have a special encoding function for the event ring length.
Add a field for this to the EV_CH_E_CNTXT_1 GSI register, and use it
in place of ev_ch_e_cntxt_1_length_encode() (which can be removed).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Starting at IPA v4.5, almost all GSI registers had their offsets
changed by a fixed amount (shifted downward by 0xd000). Rather than
defining offsets for all those registers dependent on version, an
adjustment was applied for most register accesses. This was
implemented in commit cdeee49f3ef7f ("net: ipa: adjust GSI register
addresses"). It was later modified to be a bit more obvious about
the adjusment, in commit 571b1e7e58ad3 ("net: ipa: use a separate
pointer for adjusted GSI memory").
We now are able to define every GSI register with its own offset, so
there's no need to implement this special adjustment.
So get rid of the "virt_raw" pointer, and just maintain "virt" as
the (non-adjusted) base address of I/O mapped GSI register memory.
Redefine the offsets of all GSI registers (other than the INTER_EE
ones, which were not subject to the adjustment) for IPA v4.5+,
subtracting 0xd000 from their defined offsets instead.
Move the ERROR_LOG and ERROR_LOG_CLR definitions further down in the
register definition files so all registers are defined in order of
their offset.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
I spotted an error in a patch posted this week, unfortunately just
after it got accepted. The effect of the bug is that time-based
interrupt moderation is disabled. This is not technically a bug,
but it is not what is intended. The problem is that a |= assignment
got implemented as a simple assignment, so the previously assigned
value was ignored.
Fixes: edc6158b18af ("net: ipa: define fields for event-ring related registers")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Do not always add NETDEV_XDP_ACT_XSK_ZEROCOPY bit in xdp_features flag
but check if the NIC really supports it.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/3dba6ea42dc343a9f2d7d1a6a6a6c173235e1ebf.1676471386.git.lorenzo@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Kernel test robot reports:
arch/powerpc/mm/nohash/e500.c:314:21: warning: no previous prototype for 'relocate_init' [-Wmissing-prototypes]
314 | notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start)
| ^~~~~~~~~~~~~
Add it in mm/mmu_decl.h, close to associated is_second_reloc
variable declaration.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/oe-kbuild-all/202302181136.wgyCKUcs-lkp@intel.com/
Link: https://lore.kernel.org/r/ac9107acf24135e1a07e8f84d2090572d43e3fe4.1676712510.git.christophe.leroy@csgroup.eu
|
|
argv needs to be free when setup_async_work fails or when the current
process is woken up.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
|
|
Another Lenovo convertable which reports a landscape resolution of
1920x1200 with a pitch of (1920 * 4) bytes, while the actual framebuffer
has a resolution of 1200x1920 with a pitch of (1200 * 4) bytes.
Signed-off-by: Darrell Kavanagh <darrell.kavanagh@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Running a rt-kernel base on 6.2.0-rc3-rt1 on an Ampere Altra outputs
the following:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9, name: kworker/u320:0
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
3 locks held by kworker/u320:0/9:
#0: ffff3fff8c27d128 ((wq_completion)efi_rts_wq){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41)
#1: ffff80000861bdd0 ((work_completion)(&efi_rts_work.work)){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41)
#2: ffffdf7e1ed3e460 (efi_rt_lock){+.+.}-{3:3}, at: efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101)
Preemption disabled at:
efi_virtmap_load (./arch/arm64/include/asm/mmu_context.h:248)
CPU: 0 PID: 9 Comm: kworker/u320:0 Tainted: G W 6.2.0-rc3-rt1
Hardware name: WIWYNN Mt.Jade Server System B81.03001.0005/Mt.Jade Motherboard, BIOS 1.08.20220218 (SCP: 1.08.20220218) 2022/02/18
Workqueue: efi_rts_wq efi_call_rts
Call trace:
dump_backtrace (arch/arm64/kernel/stacktrace.c:158)
show_stack (arch/arm64/kernel/stacktrace.c:165)
dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
dump_stack (lib/dump_stack.c:114)
__might_resched (kernel/sched/core.c:10134)
rt_spin_lock (kernel/locking/rtmutex.c:1769 (discriminator 4))
efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101)
[...]
This seems to come from commit ff7a167961d1 ("arm64: efi: Execute
runtime services from a dedicated stack") which adds a spinlock. This
spinlock is taken through:
efi_call_rts()
\-efi_call_virt()
\-efi_call_virt_pointer()
\-arch_efi_call_virt_setup()
Make 'efi_rt_lock' a raw_spinlock to avoid being preempted.
[ardb: The EFI runtime services are called with a different set of
translation tables, and are permitted to use the SIMD registers.
The context switch code preserves/restores neither, and so EFI
calls must be made with preemption disabled, rather than only
disabling migration.]
Fixes: ff7a167961d1 ("arm64: efi: Execute runtime services from a dedicated stack")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
This patch adds rtt_resp_dscp to the current debug controllability of
congestion control (CC) parameters.
rtt_resp_dscp can be read or written through debugfs.
If set, its value overwrites the DSCP of the generated RTT response.
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://lore.kernel.org/r/1dcc3440ee53c688f19f579a051ded81a2aaa70a.1676538714.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The implementation of syscall_get_nr on mips used to ignore the task
argument and return the syscall number of the calling thread instead of
the target thread.
The bug was exposed to user space by commit 201766a20e30f ("ptrace: add
PTRACE_GET_SYSCALL_INFO request") and detected by strace test suite.
Link: https://github.com/strace/strace/issues/235
Fixes: c2d9f1775731 ("MIPS: Fix syscall_get_nr for the syscall exit tracing.")
Cc: <stable@vger.kernel.org> # v3.19+
Co-developed-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Elvira Khabirova <lineprinter0@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
When MIPS_CPS=y, MIPS_CPS_PM is not set, HOTPLUG_CPU is not set, and
KEXEC=y, cps_shutdown_this_cpu() attempts to call cps_pm_enter_state(),
which is not built when MIPS_CPS_PM is not set.
Conditionally execute the else branch based on CONFIG_HOTPLUG_CPU
to remove the build error.
This build failure is from a randconfig file.
mips-linux-ld: arch/mips/kernel/smp-cps.o: in function `$L162':
smp-cps.c:(.text.cps_kexec_nonboot_cpu+0x31c): undefined reference to `cps_pm_enter_state'
Fixes: 1447864bee4c ("MIPS: kexec: CPS systems to halt nonboot CPUs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dengcheng Zhu <dzhu@wavecomp.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This makes the driver present the clk32k signal if requested.
It is needed to clock the PMU of the BCM4330 WiFi and Bluetooth
module of the CI20 board.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Syzbot reported a hung task problem:
==================================================================
INFO: task syz-executor232:5073 blocked for more than 143 seconds.
Not tainted 6.2.0-rc2-syzkaller-00024-g512dee0c00ad #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-exec232 state:D stack:21024 pid:5073 ppid:5072 flags:0x00004004
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5244 [inline]
__schedule+0x995/0xe20 kernel/sched/core.c:6555
schedule+0xcb/0x190 kernel/sched/core.c:6631
__wait_on_freeing_inode fs/inode.c:2196 [inline]
find_inode_fast+0x35a/0x4c0 fs/inode.c:950
iget_locked+0xb1/0x830 fs/inode.c:1273
__ext4_iget+0x22e/0x3ed0 fs/ext4/inode.c:4861
ext4_xattr_inode_iget+0x68/0x4e0 fs/ext4/xattr.c:389
ext4_xattr_inode_dec_ref_all+0x1a7/0xe50 fs/ext4/xattr.c:1148
ext4_xattr_delete_inode+0xb04/0xcd0 fs/ext4/xattr.c:2880
ext4_evict_inode+0xd7c/0x10b0 fs/ext4/inode.c:296
evict+0x2a4/0x620 fs/inode.c:664
ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474
__ext4_fill_super fs/ext4/super.c:5516 [inline]
ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644
get_tree_bdev+0x400/0x620 fs/super.c:1282
vfs_get_tree+0x88/0x270 fs/super.c:1489
do_new_mount+0x289/0xad0 fs/namespace.c:3145
do_mount fs/namespace.c:3488 [inline]
__do_sys_mount fs/namespace.c:3697 [inline]
__se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fa5406fd5ea
RSP: 002b:00007ffc7232f968 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fa5406fd5ea
RDX: 0000000020000440 RSI: 0000000020000000 RDI: 00007ffc7232f970
RBP: 00007ffc7232f970 R08: 00007ffc7232f9b0 R09: 0000000000000432
R10: 0000000000804a03 R11: 0000000000000202 R12: 0000000000000004
R13: 0000555556a7a2c0 R14: 00007ffc7232f9b0 R15: 0000000000000000
</TASK>
==================================================================
The problem is that the inode contains an xattr entry with ea_inum of 15
when cleaning up an orphan inode <15>. When evict inode <15>, the reference
counting of the corresponding EA inode is decreased. When EA inode <15> is
found by find_inode_fast() in __ext4_iget(), it is found that the EA inode
holds the I_FREEING flag and waits for the EA inode to complete deletion.
As a result, when inode <15> is being deleted, we wait for inode <15> to
complete the deletion, resulting in an infinite loop and triggering Hung
Task. To solve this problem, we only need to check whether the ino of EA
inode and parent is the same before getting EA inode.
Link: https://syzkaller.appspot.com/bug?extid=77d6fcc37bbb92f26048
Reported-by: syzbot+77d6fcc37bbb92f26048@syzkaller.appspotmail.com
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230110133436.996350-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Following process will make data lost and could lead to a filesystem
corrupted problem:
1. jh(bh) is inserted into T1->t_checkpoint_list, bh is dirty, and
jh->b_transaction = NULL
2. T1 is added into journal->j_checkpoint_transactions.
3. Get bh prepare to write while doing checkpoing:
PA PB
do_get_write_access jbd2_log_do_checkpoint
spin_lock(&jh->b_state_lock)
if (buffer_dirty(bh))
clear_buffer_dirty(bh) // clear buffer dirty
set_buffer_jbddirty(bh)
transaction =
journal->j_checkpoint_transactions
jh = transaction->t_checkpoint_list
if (!buffer_dirty(bh))
__jbd2_journal_remove_checkpoint(jh)
// bh won't be flushed
jbd2_cleanup_journal_tail
__jbd2_journal_file_buffer(jh, transaction, BJ_Reserved)
4. Aborting journal/Power-cut before writing latest bh on journal area.
In this way we get a corrupted filesystem with bh's data lost.
Fix it by moving the clearing of buffer_dirty bit just before the call
to __jbd2_journal_file_buffer(), both bit clearing and jh->b_transaction
assignment are under journal->j_list_lock locked, so that
jbd2_log_do_checkpoint() will wait until jh's new transaction fininshed
even bh is currently not dirty. And journal_shrink_one_cp_list() won't
remove jh from checkpoint list if the buffer head is reused in
do_get_write_access().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216898
Cc: <stable@kernel.org>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: zhanchengbin <zhanchengbin1@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230110015327.1181863-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When mounting a crafted ext4 image, s_journal_inum may change after journal
replay, which is obviously unreasonable because we have successfully loaded
and replayed the journal through the old s_journal_inum. And the new
s_journal_inum bypasses some of the checks in ext4_get_journal(), which
may trigger a null pointer dereference problem. So if s_journal_inum
changes after the journal replay, we ignore the change, and rewrite the
current journal_inum to the superblock.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216541
Reported-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230107032126.4165860-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In ext4_fill_super(), EXT4_ORPHAN_FS flag is cleared after
ext4_orphan_cleanup() is executed. Therefore, when __ext4_iget() is
called to get an inode whose i_nlink is 0 when the flag exists, no error
is returned. If the inode is a special inode, a null pointer dereference
may occur. If the value of i_nlink is 0 for any inodes (except boot loader
inodes) got by using the EXT4_IGET_SPECIAL flag, the current file system
is corrupted. Therefore, make the ext4_iget() function return an error if
it gets such an abnormal special inode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199179
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216541
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216539
Reported-by: Luís Henriques <lhenriques@suse.de>
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230107032126.4165860-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.
ext4_feat_ktype was setting the "release" handler to "kfree", which
doesn't have a matching function prototype. Add a simple wrapper
with the correct prototype.
This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches.
Note that this code is only reached when ext4 is a loadable module and
it is being unloaded:
CFI failure at kobject_put+0xbb/0x1b0 (target: kfree+0x0/0x180; expected type: 0x7c4aa698)
...
RIP: 0010:kobject_put+0xbb/0x1b0
...
Call Trace:
<TASK>
ext4_exit_sysfs+0x14/0x60 [ext4]
cleanup_module+0x67/0xedb [ext4]
Fixes: b99fee58a20a ("ext4: create ext4_feat kobject dynamically")
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Build-tested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230103234616.never.915-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230104210908.gonna.388-kees@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Variables are assigned first and then used. Initialization is not required.
Signed-off-by: XU pengfei <xupengfei@nfschina.com>
Link: https://lore.kernel.org/r/20230104055229.3663-1-xupengfei@nfschina.com
|
|
If ENOMEM fails when the extent is splitting, we need to restore the length
of the split extent.
In the ext4_split_extent_at function, only in ext4_ext_create_new_leaf will
it alloc memory and change the shape of the extent tree,even if an ENOMEM
is returned at this time, the extent tree is still self-consistent, Just
restore the split extent lens in the function ext4_split_extent_at.
ext4_split_extent_at
ext4_ext_insert_extent
ext4_ext_create_new_leaf
1)ext4_ext_split
ext4_find_extent
2)ext4_ext_grow_indepth
ext4_find_extent
Signed-off-by: zhanchengbin <zhanchengbin1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230103022812.130603-1-zhanchengbin1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The ea block expansion need to access s_root while it is
already set as NULL when umount is triggered. Refuse this
request to avoid panic.
Reported-by: syzbot+2dacb8f015bf1420155f@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=3613786cb88c93aa1c6a279b1df6a7b201347d08
Link: https://lore.kernel.org/r/20230103014517.495275-3-jun.nie@linaro.org
Cc: stable@kernel.org
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Copy ea data from inode entry when expanding ea block if possible.
Then remove the ea entry if expansion success. Thus memcpy to a
temporary buffer may be avoided.
If the expansion fails, we do not need to recovery the removed ea
entry neither in this way.
Reported-by: syzbot+2dacb8f015bf1420155f@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=3613786cb88c93aa1c6a279b1df6a7b201347d08
Link: https://lore.kernel.org/r/20230103014517.495275-2-jun.nie@linaro.org
Cc: stable@kernel.org
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_update_backup_sb checks for err having some value
after unlocking buffer. But err has not been updated
till that point in any code which will lead execution
of the code in question.
Signed-off-by: Tanmay Bhushan <007047221b@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221230141858.3828-1-007047221b@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for x86.
Revert the recent change to the MTRR code which aimed to support
SEV-SNP guests on Hyper-V. It caused a regression on XEN Dom0 kernels.
The underlying issue of MTTR (mis)handling in the x86 code needs some
deeper investigation and is definitely not 6.2 material"
* tag 'x86-urgent-2023-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mtrr: Revert 90b926e68f50 ("x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case")
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A fix for a long standing issue in the alarmtimer code.
Posix-timers armed with a short interval with an ignored signal result
in an unpriviledged DoS. Due to the ignored signal the timer switches
into self rearm mode. This issue had been "fixed" before but a rework
of the alarmtimer code 5 years ago lost that workaround.
There is no real good solution for this issue, which is also worked
around in the core posix-timer code in the same way, but it certainly
moved way up on the ever growing todo list"
* tag 'timers-urgent-2023-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
alarmtimer: Prevent starvation by small intervals and SIG_IGN
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single build fix for the PCI/MSI infrastructure.
The addition of the new alloc/free interfaces in this cycle forgot to
add stub functions for pci_msix_alloc_irq_at() and pci_msix_free_irq()
for the CONFIG_PCI_MSI=n case"
* tag 'irq-urgent-2023-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Provide missing stubs for CONFIG_PCI_MSI=n
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- New and improved irqdomain locking, closing a number of races that
became apparent now that we are able to probe drivers in parallel
- A bunch of OF node refcounting bugs have been fixed
- We now have a new IPI mux, lifted from the Apple AIC code and
made common. It is expected that riscv will eventually benefit
from it
- Two small fixes for the Broadcom L2 drivers
- Various cleanups and minor bug fixes
Link: https://lore.kernel.org/r/20230218143452.3817627-1-maz@kernel.org
|
|
Remove unnecessary NULL assignment int create_new_subsystem().
Link: https://lkml.kernel.org/r/20221123065124.3982439-1-bobo.shaobowang@huawei.com
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
In the case of keeping the system running, the preferred method for
tracing the kernel is dynamic tracing (kprobe), but the drawback of
this method is that events are lost, especially when tracing packages
in the network stack.
Livepatching provides a potential solution, which is to reimplement the
function you want to replace and insert a static tracepoint.
In such a way, custom stable static tracepoints can be expanded without
rebooting the system.
Link: https://lkml.kernel.org/r/20221102160236.11696-1-iecedge@gmail.com
Signed-off-by: Jianlin Lv <iecedge@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many comments and Kconfig help messages in the tracing code still refer
to this older debugfs path, so let's update them to avoid confusion.
Link: https://lore.kernel.org/linux-trace-kernel/20230215223350.2658616-2-zwisler@google.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull kvm/x86 fixes from Paolo Bonzini:
- zero all padding for KVM_GET_DEBUGREGS
- fix rST warning
- disable vPMU support on hybrid CPUs
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: initialize all of the kvm_debugregs structure before sending it to userspace
perf/x86: Refuse to export capabilities for hybrid PMUs
KVM: x86/pmu: Disable vPMU support on hybrid CPUs (host PMUs)
Documentation/hw-vuln: Fix rST warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 regression fix from Will Deacon:
"Apologies for the _extremely_ late pull request here, but we had a
'perf' (i.e. CPU PMU) regression on the Apple M1 reported on Wednesday
[1] which was introduced by bd2756811766 ("perf: Rewrite core context
handling") during the merge window.
Mark and I looked into this and noticed an additional problem caused
by the same patch, where the 'CHAIN' event (used to combine two
adjacent 32-bit counters into a single 64-bit counter) was not being
filtered correctly. Mark posted a series on Thursday [2] which
addresses both of these regressions and I queued it the same day.
The changes are small, self-contained and have been confirmed to fix
the original regression.
Summary:
- Fix 'perf' regression for non-standard CPU PMU hardware (i.e. Apple
M1)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: perf: reject CHAIN events at creation time
arm_pmu: fix event CPU filtering
|
|
Pull block fix from Jens Axboe:
"I guess this is what can happen when you prep things early for going
away, something else comes in last minute. This one fixes another
regression in 6.2 for NVMe, from this release, and hence we should
probably get it submitted for 6.2.
Still waiting for the original reporter (see bugzilla linked in the
commit) to test this, but Keith managed to setup and recreate the
issue and tested the patch that way"
* tag 'block-6.2-2023-02-17' of git://git.kernel.dk/linux:
nvme-pci: refresh visible attrs for cmb attributes
|
|
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230216-kobj_type-xen-v1-1-742423de7d71@weissschuh.net
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In order to prevent a device from disappearing when a background job was
started, dev_hold() and dev_put() calls were made. During the
stabilization phase of the scan/beacon features, it was later decided
that removing the device while a background job was ongoing was a valid use
case, and we should instead stop the background job and then remove the
device, rather than prevent the device from being removed. This is what
is currently done, which means manually reference counting the device
during background jobs is no longer needed.
Fixes: ed3557c947e1 ("ieee802154: Add support for user scanning requests")
Fixes: 9bc114504b07 ("ieee802154: Add support for user beaconing requests")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230214135035.1202471-7-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
At this stage we simply do not care about the delayed work value,
because active scan is not yet supported, so we can blindly queue
another work once a beacon has been sent.
It fixes a smatch warning:
mac802154_beacon_worker() warn: always true condition
'(local->beacon_interval >= 0) => (0-u32max >= 0)'
Fixes: 3accf4762734 ("mac802154: Handle basic beaconing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230214135035.1202471-6-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Using ieee802154_subif_start_xmit() to bypass the net queue when
sending beacons is broken because it does not acquire the
HARD_TX_LOCK(), hence not preventing datagram buffers to be smashed by
beacons upon contention situation. Using the mlme_tx helper is not the
best fit either but at least it is not buggy and has little-to-no
performance hit. More details are given in the comment explaining this
choice in the code.
Fixes: 3accf4762734 ("mac802154: Handle basic beaconing")
Reported-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230214135035.1202471-5-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Returning EPERM gives the impression that "right now" it is not
possible, but "later" it could be, while what we want to express is the
fact that this is not currently supported at all (might change in the
future). So let's return EOPNOTSUPP instead.
Fixes: ed3557c947e1 ("ieee802154: Add support for user scanning requests")
Suggested-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230214135035.1202471-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Instead of printing error messages in the kernel log, let's use extack.
When there is a netlink error returned that could be further specified
with a string, use extack as well.
Apply this logic to the very recent scan/beacon infrastructure.
Fixes: ed3557c947e1 ("ieee802154: Add support for user scanning requests")
Fixes: 9bc114504b07 ("ieee802154: Add support for user beaconing requests")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230214135035.1202471-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Instead of open-coding scan parameters (page, channels, duration, etc),
let's use the existing NLA_POLICY* macros. This help greatly reducing
the error handling and clarifying the overall logic.
Fixes: ed3557c947e1 ("ieee802154: Add support for user scanning requests")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230214135035.1202471-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
'x86/vt-d', 'x86/amd' and 'core' into next
|
|
If device->domain is same as new domain then we can skip the
device attach process.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230215052642.6016-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
iommu_attach_group() attaches all devices in a group to domain and then
sets group domain (group->domain). Current code (__iommu_attach_group())
does not handle error path. This creates problem as devices to domain
attachment is in inconsistent state.
Flow:
- During boot iommu attach devices to default domain
- Later some device driver (like amd/iommu_v2 or vfio) tries to attach
device to new domain.
- In iommu_attach_group() path we detach device from current domain.
Then it tries to attach devices to new domain.
- If it fails to attach device to new domain then device to domain link
is broken.
- iommu_attach_group() returns error.
- At this stage iommu_attach_group() caller thinks, attaching device to
new domain failed and devices are still attached to old domain.
- But in reality device to old domain link is broken. It will result
in all sort of failures (like IO page fault) later.
To recover from this situation, we need to attach all devices back to the
old domain. Also log warning if it fails attach device back to old domain.
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Reported-by: Matt Fagnani <matt.fagnani@bell.net>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Matt Fagnani <matt.fagnani@bell.net>
Link: https://lore.kernel.org/r/20230215052642.6016-1-vasant.hegde@amd.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865
Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
* irq/bcm-l2-fixes:
: .
: Broadcom L2 irqchip fixes for correct handling of level interrupts,
: courtesy of Florian Fainelli.
: .
irqchip/irq-bcm7120-l2: Set IRQ_LEVEL for level triggered interrupts
irqchip/irq-brcmstb-l2: Set IRQ_LEVEL for level triggered interrupts
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When support for the interrupt controller was added with a5042de2688d,
we forgot to update the flags to be set to contain IRQ_LEVEL. While the
flow handler is correct, the output from /proc/interrupts does not show
such interrupts as being level triggered when they are, correct that.
Fixes: a5042de2688d ("irqchip: bcm7120-l2: Add Broadcom BCM7120-style Level 2 interrupt controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221216230934.2478345-3-f.fainelli@gmail.com
|
|
When support for the level triggered interrupt controller flavor was
added with c0ca7262088e, we forgot to update the flags to be set to
contain IRQ_LEVEL. While the flow handler is correct, the output from
/proc/interrupts does not show such interrupts as being level triggered
when they are, correct that.
Fixes: c0ca7262088e ("irqchip/brcmstb-l2: Add support for the BCM7271 L2 controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221216230934.2478345-2-f.fainelli@gmail.com
|
|
Make sure to honour the max_hw_heartbeat_ms while programming the timeout
value to WOR. Clamp the timeout passed to sbsa_gwdt_set_timeout() to
make sure the programmed value is within the permissible range.
Fixes: abd3ac7902fb ("watchdog: sbsa: Support architecture version 1")
Signed-off-by: George Cherian <george.cherian@marvell.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230209021117.1512097-1-george.cherian@marvell.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add a compatible for the sa8775p platform's KPSS watchdog.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230201152038.203387-4-brgl@bgdev.pl
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This synchronizes the information reported by ioctl and sysfs.
The mismatch is confusing because "wdctl" from util-linux uses the ioctl
when used with root privileges and sysfs without.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221216-watchdog-sysfs-v2-2-6189311103a9@weissschuh.net
[groeck: Fixed continuation line alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This synchronizes the information reported by ioctl and sysfs.
The mismatch is confusing because "wdctl" from util-linux uses the ioctl
when used with root privileges and sysfs without.
The file is called "fw_version" instead of "firmware_version" as
"firmware_version" is already used as custom attribute by single drivers.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221216-watchdog-sysfs-v2-1-6189311103a9@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
