summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-11arm64: dts: qcom: Add base qrb4210-rb2 board dtsBhupesh Sharma
Add DTS for Qualcomm qrb4210-rb2 board which uses SM4250 SoC. This adds debug uart, emmc, uSD and tlmm support along with regulators found on this board. Also defines the 'xo_board' and 'sleep_clk' frequencies for this board. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> [bjorn: Squashed separate patch specifying regulator-system-load] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230411072840.2751813-3-bhupesh.sharma@linaro.org
2023-04-07arm64: dts: qcom: sm8550: add Soundwire controllersKrzysztof Kozlowski
Add nodes for LPASS Soundwire v2.0.0 controllers. Use labels with indices matching downstream DTS, to make any comparisons easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230405061129.143553-1-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm8250: Add GPU speedbin supportKonrad Dybcio
SM8250 has (at least) four GPU speed bins. With the support added on the driver side, wire up bin detection in the DTS to restrict lower-quality SKUs from running at frequencies they were not validated at. Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On Sony Xperia 5 II (speed bin 0x7) Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-5-2dede22dd7f7@linaro.org
2023-04-07arm64: dts: qcom: sm8150: Add GPU speedbin supportKonrad Dybcio
SM8150 has (at least) two GPU speed bins. With the support added on the driver side, wire up bin detection in the DTS to restrict lower-quality SKUs from running at frequencies they were not validated at. Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On Sony Xperia 5 (speed bin 0x3) Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-4-2dede22dd7f7@linaro.org
2023-04-07arm64: dts: qcom: sm8150: Don't start Adreno in headless modeKonrad Dybcio
Now that there's display support, there is no reason to assume the default mode for Adreno should be headless. Keep it like that for boards that previously enabled it, so as not to create regressions though. Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On Sony Xperia 5 Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-3-2dede22dd7f7@linaro.org
2023-04-07arm64: dts: qcom: ipq5332: add support for the RDP468 variantKathiravan T
Add the initial device tree support for the Reference Design Platform(RDP) 468 based on IPQ5332 family of SoCs. This patch carries the support for Console UART, SPI NOR, eMMC. Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230323093120.20558-3-quic_kathirav@quicinc.com
2023-04-07arm64: dts: qcom: sdm630: move DSI opp-table out of DSI nodeKrzysztof Kozlowski
The DSI OPP table on SDM630 is used by one DSI0, but on SDM660 is shared by two nodes (DSI0 and DSI1), thus it should be rather in top-level, not in DSI0. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407192605.168666-1-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm6115p-j606f: Enable ATH10K WiFiKonrad Dybcio
Enable the onboard QCA Wi-Fi. HW identifiers for reference: qmi chip_id 0x320 chip_family 0x4001 board_id 0xff soc_id 0x400e0000 Firmware sources: /vendor/firmware_mnt/image/wlanmdsp.bin -> qcom/.../wlanmdsp.mbn /vendor/firmware_mnt/image/bdwlan.bXX [1] -> [2] -> ath10k/.../board-2.bin [3] -> ath10k/.../firmware-5.bin Not sure where 3 comes from on the device itself, gotta investigate that.. According to [4], it's called WCN3990_STRAIT. [1] XX = board_id printed when the file is missing or by your downstream kernel firmware loader in the dmesg; if XX=ff, use bdwlan.bin [2] https://github.com/jhugo/linux/blob/5.5rc2_wifi/README [3] https://github.com/kvalo/ath10k-firmware/blob/master/WCN3990/hw1.0/HL3.1/WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1/firmware-5.bin [4] https://git.codelinaro.org/clo/la/platform/vendor/qcom-opensource/wlan/qca-wifi-host-cmn/-/blob/LA.VENDOR.1.0.r1-20700-WAIPIO.QSSI13.0/hif/src/hif_hw_version.h#L55 Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230406-topic-lenovo_features-v2-4-625d7cb4a944@linaro.org
2023-04-07arm64: dts: qcom: sm6115p-j606f: Enable remoteprocsKonrad Dybcio
Enable the [AC]DSP and MPSS and specify the firmware paths. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230406-topic-lenovo_features-v2-3-625d7cb4a944@linaro.org
2023-04-07arm64: dts: qcom: sm6115: Add RMTFSKonrad Dybcio
Add a node for RMTFS and associate it with MSA and NAV IDs to enable modem functionality on SM6115. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230406-topic-lenovo_features-v2-2-625d7cb4a944@linaro.org
2023-04-07arm64: dts: qcom: sm6115-j606f: Add ramoops nodeKonrad Dybcio
Add a ramoops node to enable retrieving crash logs. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230406-topic-lenovo_features-v2-1-625d7cb4a944@linaro.org
2023-04-07arm64: dts: qcom: msm8916-thwc-ufi001c: add function to pin configKrzysztof Kozlowski
Bindings require pin configuration nodes to have the function, even if it is GPIO: msm8916-thwc-ufi001c.dtb: pinctrl@1000000: sim-ctrl-default-state: 'oneOf' conditional failed, one must be fixed: 'esim-sel-pins', 'sim-en-pins', 'sim-sel-pins' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230324202244.744271-1-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm8550: Add the Inline Crypto Engine nodeAbel Vesa
Add support for UFS ICE by adding the qcom,ice property and the ICE dedicated devicetree node. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407105029.2274111-7-abel.vesa@linaro.org
2023-04-07arm64: dts: MSM8953: Add lpass nodesAdam Skladowski
Add nodes for remoteproc, smp2p and smsm in preparation for audio support on this platform. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407165345.42800-4-a39.skl@gmail.com
2023-04-07arm64: dts: MSM8953: Add mpss nodesAdam Skladowski
Add nodes for remoteproc, smp2p and smsm to make it possible to use modem functionality on this platform. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407165345.42800-3-a39.skl@gmail.com
2023-04-07arm64: dts: MSM8953: Add wcnss nodesAdam Skladowski
Add nodes for remoteproc, smp2p and smsm to make it possible to use wifi/bt functionality on this platform. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407165345.42800-2-a39.skl@gmail.com
2023-04-07arm64: dts: qcom: sm8350: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407180655.128771-2-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm8150: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407180655.128771-1-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: apq8016: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407180045.126952-1-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strengthKrzysztof Kozlowski
Fix typo in drive-strength property name. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407180710.128815-1-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sc8280xp-crd: correct pin drive-strengthKrzysztof Kozlowski
Fix typo in drive-strength property name. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407181541.139349-1-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm8450: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-10-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm8250: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-9-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm6350: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-8-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm6125: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-7-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sdm845: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-6-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sc8280xp: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-5-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: qcs404: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-4-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: msm8998: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-3-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: msm8996: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-2-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: msm8994: remove superfluous "input-enable"Krzysztof Kozlowski
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230407175807.124394-1-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm6125: Initial support for xiaomi-laurel-sproutLux Aliaga
Add support for the Xiaomi Mi A3 (xiaomi-laurel-sprout). Here's a summary on what's defined. - dmesg output to bootloader preconfigured display - USB - UFS - SD card - SMD RPM regulators - Volume Up, Down and Power buttons - Thermistors Signed-off-by: Lux Aliaga <they@mint.lgbt> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230306170817.3806-7-they@mint.lgbt
2023-04-07arm64: dts: qcom: sm6125: Add UFS nodesLux Aliaga
Adds a UFS host controller node and its corresponding PHY to the sm6125 platform. Signed-off-by: Lux Aliaga <they@mint.lgbt> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230306170817.3806-5-they@mint.lgbt
2023-04-07arm64: dts: qcom: sm8250-xiaomi-elish-csot: Add Xiaomi Mi Pad 5 Pro CSOT variantJianhua Lu
Add support for the Xiaomi Mi Pad 5 Pro CSOT variant. The CSOT variant uses China Star Optoelectronics Technology (CSOT) panel based on NT36523 display controller. Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230323005925.23179-3-lujianhua000@gmail.com
2023-04-07arm64: dts: qcom: sm8250-xiaomi-elish-boe: Add mdss and dsi panelJianhua Lu
Add nodes for BOE NT36523 panel found in xiaomi-elish. This panel is a dual dsi mode panel and the dsi phy type is cphy. Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230323005925.23179-2-lujianhua000@gmail.com
2023-04-07arm64: dts: qcom: Split elish dts into common dtsi and elish-boe dtsJianhua Lu
There are two panel variants of xiaomi-elish, BOE and CSOT panels. In order to support both panels, so split elish dts into common dtsi and elish-boe dts. Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230323005925.23179-1-lujianhua000@gmail.com
2023-04-07arm64: dts: qcom: sm8150: add compatible fallback to mailboxKrzysztof Kozlowski
SC8150 mailbox is compatible with SDM845. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322174148.810938-12-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sc7180: add compatible fallback to mailboxKrzysztof Kozlowski
SC7180 mailbox is compatible with SDM845. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322174148.810938-11-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: qcs404: add compatible fallback to mailboxKrzysztof Kozlowski
QCS404 mailbox is compatible with MSM8916. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322174148.810938-10-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm6125: add compatible fallback to mailboxKrzysztof Kozlowski
SM6125 mailbox is compatible with MSM8994. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322174148.810938-9-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sm6115: add compatible fallback to mailboxKrzysztof Kozlowski
SM6115 mailbox is compatible with MSM8994. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322174148.810938-8-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: sdm630: add compatible fallback to mailboxKrzysztof Kozlowski
SDM630 mailbox is compatible with MSM8994. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322174148.810938-7-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: msm8998: add compatible fallback to mailboxKrzysztof Kozlowski
MSM8998 mailbox is compatible with MSM8994. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322174148.810938-6-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: msm8976: add compatible fallback to mailboxKrzysztof Kozlowski
MSM8976 mailbox is compatible with MSM8994. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322174148.810938-5-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: ipq8074: add compatible fallback to mailboxKrzysztof Kozlowski
IPQ8074 mailbox is compatible with IPQ6018. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322174148.810938-4-krzysztof.kozlowski@linaro.org
2023-04-07arm64: dts: qcom: Add initial QTI RB1 device treeKonrad Dybcio
Add an initial device tree for the QTI RB1 development board, based on the QRB2210 (QCM2290 derivative) SoC. This device tree targets the SoM revision 4, a.k.a. the Mass Production SKU. To get a successful boot, run: cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/qrb2210-rb1.dtb >\ .Image.gz-dtb mkbootimg \ --kernel .Image.gz-dtb \ --ramdisk some_initrd \ --output rb1-boot.img \ --pagesize 4096 \ --base 0x8000 \ --cmdline 'some cmdline' fastboot boot rb1-boot.img There's no dtbo or other craziness to worry about. For the best dev experience, you can erase boot and use fastboot boot everytime, so that the bootloader doesn't mess with you. If you have a SoM revision 3 or older (there should be a sticker on it with text like -r00, where r is the revision), you will need to apply this additional diff: aliases { - serial0 = &uart0; + serial0 = &uart4; /* UART connected to the Micro-USB port via a FTDI chip */ - &uart0 { + &uart4 { That should however only concern preproduction boards. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230403-topic-rb1_qcm-v2-5-dae06f8830dc@linaro.org
2023-04-07arm64: dts: qcom: Add initial PM2250 device treeKonrad Dybcio
Introduce an initial device tree for the PM2250 (sometimes known as PM4125) PMIC. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230403-topic-rb1_qcm-v2-4-dae06f8830dc@linaro.org
2023-04-07arm64: dts: qcom: Add initial QCM2290 device treeKonrad Dybcio
Add an initial device tree for the QCM2290 low-end SoC, featuring 4 "customized" Cortex-A53 cores and up to 4 GiB of LPDDR(3/4X). This revision brings support for: - TSENS & thermal zones - SDHCI1/2 - I2C, SPI, UART - MPSS - ADSP - Wi-Fi Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230403-topic-rb1_qcm-v2-3-dae06f8830dc@linaro.org
2023-04-07arm64: dts: qcom: sdm845-polaris: Drop inexistent propertiesKonrad Dybcio
Drop the qcom,snoc-host-cap-skip-quirk that was never introduced to solve schema warnings. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230406-topic-ath10k_bindings-v3-2-00895afc7764@linaro.org
2023-04-07arm64: dts: qcom: sdm845-shift-axolotl: enable SLPIDylan Van Assche
Enable the SLPI DSP on the SHIFTPHONES SHIFT6mq phone with a Qualcomm SDM845 SoC. Signed-off-by: Dylan Van Assche <me@dylanvanassche.be> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230406173148.28309-6-me@dylanvanassche.be
generated by cgit (git 2.34.1) at 2025-09-09 16:08:55 +0000