Age | Commit message (Collapse) | Author |
|
In f2fs_fileattr_set(),
if (!fa->flags_valid)
mask &= FS_COMMON_FL;
In this case, we can set supported flags by mask only instead of BUG_ON.
/* Flags shared betwen flags/xflags */
(FS_SYNC_FL | FS_IMMUTABLE_FL | FS_APPEND_FL | \
FS_NODUMP_FL | FS_NOATIME_FL | FS_DAX_FL | \
FS_PROJINHERIT_FL)
Fixes: 9b1bb01c8ae7 ("f2fs: convert to fileattr")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Unable to handle kernel NULL pointer dereference at virtual address 000000000000001a
pc : f2fs_inplace_write_data+0x144/0x208
lr : f2fs_inplace_write_data+0x134/0x208
Call trace:
f2fs_inplace_write_data+0x144/0x208
f2fs_do_write_data_page+0x270/0x770
f2fs_write_single_data_page+0x47c/0x830
__f2fs_write_data_pages+0x444/0x98c
f2fs_write_data_pages.llvm.16514453770497736882+0x2c/0x38
do_writepages+0x58/0x118
__writeback_single_inode+0x44/0x300
writeback_sb_inodes+0x4b8/0x9c8
wb_writeback+0x148/0x42c
wb_do_writeback+0xc8/0x390
wb_workfn+0xb0/0x2f4
process_one_work+0x1fc/0x444
worker_thread+0x268/0x4b4
kthread+0x13c/0x158
ret_from_fork+0x10/0x18
Fixes: 955772787667 ("f2fs: drop inplace IO if fs status is abnormal")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
During the discussion in [0]. It was pointed out that static functions
in ppc64 is prefixed with ".". For example, the 'readelf -s vmlinux.ppc':
89326: c000000001383280 24 NOTYPE LOCAL DEFAULT 31 cubictcp_init
89327: c000000000c97c50 168 FUNC LOCAL DEFAULT 2 .cubictcp_init
The one with FUNC type is ".cubictcp_init" instead of "cubictcp_init".
The "." seems to be done by arch/powerpc/include/asm/ppc_asm.h.
This caused that pahole cannot generate the BTF for these tcp-cc kernel
functions because pahole only captures the FUNC type and "cubictcp_init"
is not. It then failed the kernel compilation in ppc64.
This behavior is only reported in ppc64 so far. I tried arm64, s390,
and sparc64 and did not observe this "." prefix and NOTYPE behavior.
Since the kfunc call is only supported in the x86_64 and x86_32 JIT,
this patch limits those tcp-cc functions to x86 only to avoid unnecessary
compilation issue in other ARCHs. In the future, we can examine if it
is better to change all those functions from static to extern.
[0] https://lore.kernel.org/bpf/4e051459-8532-7b61-c815-f3435767f8a0@kernel.org/
Fixes: e78aea8b2170 ("bpf: tcp: Put some tcp cong functions in allowlist for bpf-tcp-cc")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Michal Suchánek <msuchanek@suse.de>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20210508005011.3863757-1-kafai@fb.com
|
|
As discussed in [0], this ports test_tc_redirect.sh to the test_progs
framework and removes the old test.
This makes it more in line with rest of the tests and makes it possible
to run this test case with vmtest.sh and under the bpf CI.
The upcoming skb_change_head() helper fix in [0] is depending on it and
extending the test case to redirect a packet from L3 device to veth.
[0] https://lore.kernel.org/bpf/20210427135550.807355-1-joamaki@gmail.com
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210505085925.783985-1-joamaki@gmail.com
|
|
Where that macro isn't available.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/YJaspEh0qZr4LYOc@kernel.org
|
|
The bpf_seq_printf, bpf_trace_printk and bpf_snprintf helpers share one
per-cpu buffer that they use to store temporary data (arguments to
bprintf). They "get" that buffer with try_get_fmt_tmp_buf and "put" it
by the end of their scope with bpf_bprintf_cleanup.
If one of these helpers gets called within the scope of one of these
helpers, for example: a first bpf program gets called, uses
bpf_trace_printk which calls raw_spin_lock_irqsave which is traced by
another bpf program that calls bpf_snprintf, then the second "get"
fails. Essentially, these helpers are not re-entrant. They would return
-EBUSY and print a warning message once.
This patch triples the number of bprintf buffers to allow three levels
of nesting. This is very similar to what was done for tracepoints in
"9594dc3c7e7 bpf: fix nested bpf tracepoints with per-cpu data"
Fixes: d9c9e4db186a ("bpf: Factorize bpf_trace_printk and bpf_seq_printf")
Reported-by: syzbot+63122d0bc347f18c1884@syzkaller.appspotmail.com
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210511081054.2125874-1-revest@chromium.org
|
|
The recursion check in __bpf_prog_enter and __bpf_prog_exit
leaves some (not inlined) functions unprotected:
In __bpf_prog_enter:
- migrate_disable is called before prog->active is checked
In __bpf_prog_exit:
- migrate_enable,rcu_read_unlock_strict are called after
prog->active is decreased
When attaching trampoline to them we get panic like:
traps: PANIC: double fault, error_code: 0x0
double fault: 0000 [#1] SMP PTI
RIP: 0010:__bpf_prog_enter+0x4/0x50
...
Call Trace:
<IRQ>
bpf_trampoline_6442466513_0+0x18/0x1000
migrate_disable+0x5/0x50
__bpf_prog_enter+0x9/0x50
bpf_trampoline_6442466513_0+0x18/0x1000
migrate_disable+0x5/0x50
__bpf_prog_enter+0x9/0x50
bpf_trampoline_6442466513_0+0x18/0x1000
migrate_disable+0x5/0x50
__bpf_prog_enter+0x9/0x50
bpf_trampoline_6442466513_0+0x18/0x1000
migrate_disable+0x5/0x50
...
Fixing this by adding deny list of btf ids for tracing
programs and checking btf id during program verification.
Adding above functions to this list.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210429114712.43783-1-jolsa@kernel.org
|
|
Add a kconfig knob which allows for unprivileged bpf to be disabled by default.
If set, the knob sets /proc/sys/kernel/unprivileged_bpf_disabled to value of 2.
This still allows a transition of 2 -> {0,1} through an admin. Similarly,
this also still keeps 1 -> {1} behavior intact, so that once set to permanently
disabled, it cannot be undone aside from a reboot.
We've also added extra2 with max of 2 for the procfs handler, so that an admin
still has a chance to toggle between 0 <-> 2.
Either way, as an additional alternative, applications can make use of CAP_BPF
that we added a while ago.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/74ec548079189e4e4dffaeb42b8987bb3c852eee.1620765074.git.daniel@iogearbox.net
|
|
Right now, all core BPF related options are scattered in different Kconfig
locations mainly due to historic reasons. Moving forward, lets add a proper
subsystem entry under ...
General setup --->
BPF subsystem --->
... in order to have all knobs in a single location and thus ease BPF related
configuration. Networking related bits such as sockmap are out of scope for
the general setup and therefore better suited to remain in net/Kconfig.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/f23f58765a4d59244ebd8037da7b6a6b2fb58446.1620765074.git.daniel@iogearbox.net
|
|
rxe_qp_do_cleanup() relies on valid pointer values in QP for the properly
created ones, but in case rxe_qp_from_init() failed it was filled with
garbage and caused tot the following error.
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 12560 at lib/refcount.c:28 refcount_warn_saturate+0x1d1/0x1e0 lib/refcount.c:28
Modules linked in:
CPU: 1 PID: 12560 Comm: syz-executor.4 Not tainted 5.12.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0x1d1/0x1e0 lib/refcount.c:28
Code: e9 db fe ff ff 48 89 df e8 2c c2 ea fd e9 8a fe ff ff e8 72 6a a7 fd 48 c7 c7 e0 b2 c1 89 c6 05 dc 3a e6 09 01 e8 ee 74 fb 04 <0f> 0b e9 af fe ff ff 0f 1f 84 00 00 00 00 00 41 56 41 55 41 54 55
RSP: 0018:ffffc900097ceba8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff815bb075 RDI: fffff520012f9d67
RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815b4eae R11: 0000000000000000 R12: ffff8880322a4800
R13: ffff8880322a4940 R14: ffff888033044e00 R15: 0000000000000000
FS: 00007f6eb2be3700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fdbe5d41000 CR3: 000000001d181000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__refcount_sub_and_test include/linux/refcount.h:283 [inline]
__refcount_dec_and_test include/linux/refcount.h:315 [inline]
refcount_dec_and_test include/linux/refcount.h:333 [inline]
kref_put include/linux/kref.h:64 [inline]
rxe_qp_do_cleanup+0x96f/0xaf0 drivers/infiniband/sw/rxe/rxe_qp.c:805
execute_in_process_context+0x37/0x150 kernel/workqueue.c:3327
rxe_elem_release+0x9f/0x180 drivers/infiniband/sw/rxe/rxe_pool.c:391
kref_put include/linux/kref.h:65 [inline]
rxe_create_qp+0x2cd/0x310 drivers/infiniband/sw/rxe/rxe_verbs.c:425
_ib_create_qp drivers/infiniband/core/core_priv.h:331 [inline]
ib_create_named_qp+0x2ad/0x1370 drivers/infiniband/core/verbs.c:1231
ib_create_qp include/rdma/ib_verbs.h:3644 [inline]
create_mad_qp+0x177/0x2d0 drivers/infiniband/core/mad.c:2920
ib_mad_port_open drivers/infiniband/core/mad.c:3001 [inline]
ib_mad_init_device+0xd6f/0x1400 drivers/infiniband/core/mad.c:3092
add_client_context+0x405/0x5e0 drivers/infiniband/core/device.c:717
enable_device_and_get+0x1cd/0x3b0 drivers/infiniband/core/device.c:1331
ib_register_device drivers/infiniband/core/device.c:1413 [inline]
ib_register_device+0x7c7/0xa50 drivers/infiniband/core/device.c:1365
rxe_register_device+0x3d5/0x4a0 drivers/infiniband/sw/rxe/rxe_verbs.c:1147
rxe_add+0x12fe/0x16d0 drivers/infiniband/sw/rxe/rxe.c:247
rxe_net_add+0x8c/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:503
rxe_newlink drivers/infiniband/sw/rxe/rxe.c:269 [inline]
rxe_newlink+0xb7/0xe0 drivers/infiniband/sw/rxe/rxe.c:250
nldev_newlink+0x30e/0x550 drivers/infiniband/core/nldev.c:1555
rdma_nl_rcv_msg+0x36d/0x690 drivers/infiniband/core/netlink.c:195
rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
rdma_nl_rcv+0x2ee/0x430 drivers/infiniband/core/netlink.c:259
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/7bf8d548764d406dbbbaf4b574960ebfd5af8387.1620717918.git.leonro@nvidia.com
Reported-by: syzbot+36a7f280de4e11c6f04e@syzkaller.appspotmail.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In commit 56b01acc1c79a ("dt-bindings: gpio: fairchild,74hc595:
Convert to json-schema"), gpio-74x164.txt was deleted and replaced
by fairchild,74hc595.yaml. Fix the reference file name.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Link: https://lore.kernel.org/r/20210506070824.10965-1-wanjiabing@vivo.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
RTC drivers used to leave .set_alarm() NULL in order to signal the RTC
device doesn't support alarms. The drivers are now clearing the
RTC_FEATURE_ALARM bit for that purpose in order to keep the rtc_class_ops
structure const. So now, .set_alarm() is set unconditionally and this
possibly causes the alarmtimer code to select an RTC device that doesn't
support alarms.
Test RTC_FEATURE_ALARM instead of relying on ops->set_alarm to determine
whether alarms are available.
Fixes: 7ae41220ef58 ("rtc: introduce features bitfield")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511014516.563031-1-alexandre.belloni@bootlin.com
|
|
Reviewed-by: Emma Anholt <emma@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Fragmentation is used only with unicast frames. Drop multicast fragments
to avoid any undesired behavior.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 v2
Cc: stable@vger.kernel.org
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.1d53bfd20a8b.Ibb63283051bb5e2c45951932c6e1f351d5a73dc3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently the fragment cache setup during peer assoc is
cleared only during peer delete. In case a key reinstallation
happens with the same peer, the same fragment cache with old
fragments added before key installation could be clubbed
with fragments received after. This might be exploited
to mix fragments of different data resulting in a proper
unintended reassembled packet to be passed up the stack.
Hence flush the fragment cache on every key installation to prevent
potential attacks (CVE-2020-24587).
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1 v2
Cc: stable@vger.kernel.org
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.218dc777836f.I9af6fc76215a35936c4152552018afb5079c5d8c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Morimoto <kuninori.morimoto.gx@renesas.com>:
Hi Mark, Guillaume
I'm so sorry to bother you again and again.
These are v2 of simple-card / audio-graph re-cleanup.
KernelCI had reported that below patches broke kontron-sl28-var3-ads2
sound card probing.
434392271afcff350fe "ASoC: simple-card: add simple_link_init()"
59c35c44a9cf89a83a9 "ASoC: simple-card: add simple_parse_node()"
Main issue I'm understanding is name create timing.
We want to create dailink->name via dlc->dai_name.
But in CPU case, this dai_name might be removed by asoc_simple_canonicalize_cpu()
if it CPU was single DAI.
Thus, we need to
A) get dlc->dai_name
B) create dailink->name via dlc->dai_name
C) call asoc_simple_canonicalize_cpu()
Above reverted patch did A->C->B.
My previous v1 patch did B->A->C.
I'm so sorry that I didn't deep test on v1.
I hope v2 patches has no issues on kontron-sl28-var3-ads2.
Link: https://lore.kernel.org/r/87cztzcq56.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87h7k0i437.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/20210423175318.13990-1-broonie@kernel.org
Link: https://lore.kernel.org/r/3ca62063-41b4-c25b-a7bc-8a8160e7b684@collabora.com
Kuninori Morimoto (4):
ASoC: simple-card: add simple_parse_node()
ASoC: simple-card: add simple_link_init()
ASoC: audio-graph: tidyup graph_dai_link_of_dpcm()
ASoC: audio-graph: tidyup graph_parse_node()
sound/soc/generic/audio-graph-card.c | 57 ++++-----
sound/soc/generic/simple-card.c | 168 +++++++++++++--------------
2 files changed, 112 insertions(+), 113 deletions(-)
--
2.25.1
|
|
In certain scenarios a normal MSDU can be received as an A-MSDU when
the A-MSDU present bit of a QoS header gets flipped during reception.
Since this bit is unauthenticated, the hardware crypto engine can pass
the frame to the driver without any error indication.
This could result in processing unintended subframes collected in the
A-MSDU list. Hence, validate A-MSDU list by checking if the first frame
has a valid subframe header.
Comparing the non-aggregated MSDU and an A-MSDU, the fields of the first
subframe DA matches the LLC/SNAP header fields of a normal MSDU.
In order to avoid processing such frames, add a validation to
filter such A-MSDU frames where the first subframe header DA matches
with the LLC/SNAP header pattern.
Tested-on: QCA9984 hw1.0 PCI 10.4-3.10-00047
Cc: stable@vger.kernel.org
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.e6f5eb7b9847.I38a77ae26096862527a5eab73caebd7346af8b66@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
TKIP Michael MIC was not verified properly for PCIe cases since the
validation steps in ieee80211_rx_h_michael_mic_verify() in mac80211 did
not get fully executed due to unexpected flag values in
ieee80211_rx_status.
Fix this by setting the flags property to meet mac80211 expectations for
performing Michael MIC validation there. This fixes CVE-2020-26141. It
does the same as ath10k_htt_rx_proc_rx_ind_hl() for SDIO which passed
MIC verification case. This applies only to QCA6174/QCA9377 PCIe.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.c3f1d42c6746.I795593fcaae941c471425b8c7d5f7bb185d29142@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the discard flag is set by the firmware for an MPDU, it should be
dropped. This allows a mitigation for CVE-2020-24588 to be implemented
in the firmware.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.11968c725b5c.Idd166365ebea2771c0c0a38c78b5060750f90e17@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fragmentation is not used with multicast frames. Discard unexpected
fragments with multicast DA. This fixes CVE-2020-26145.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.9ca6ca7945a9.I1e18b514590af17c155bda86699bc3a971a8dcf4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fragmentation is not used with multicast frames. Discard unexpected
fragments with multicast DA. This fixes CVE-2020-26145.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.5a0bd289bda8.Idd6ebea20038fb1cfee6de924aa595e5647c9eae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
PN replay check for not fragmented frames is finished in the firmware,
but this was not done for fragmented frames when ath10k is used with
QCA6174/QCA6377 PCIe. mac80211 has the function
ieee80211_rx_h_defragment() for PN replay check for fragmented frames,
but this does not get checked with QCA6174 due to the
ieee80211_has_protected() condition not matching the cleared Protected
bit case.
Validate the PN of received fragmented frames within ath10k when CCMP is
used and drop the fragment if the PN is not correct (incremented by
exactly one from the previous fragment). This applies only for
QCA6174/QCA6377 PCIe.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.9ba2664866a4.I756e47b67e210dba69966d989c4711ffc02dc6bc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For some chips/drivers, e.g., QCA6174 with ath10k, the decryption is
done by the hardware, and the Protected bit in the Frame Control field
is cleared in the lower level driver before the frame is passed to
mac80211. In such cases, the condition for ieee80211_has_protected() is
not met in ieee80211_rx_h_defragment() of mac80211 and the new security
validation steps are not executed.
Extend mac80211 to cover the case where the Protected bit has been
cleared, but the frame is indicated as having been decrypted by the
hardware. This extends protection against mixed key and fragment cache
attack for additional drivers/chips. This fixes CVE-2020-24586 and
CVE-2020-24587 for such cases.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.037aa5ca0390.I7bb888e2965a0db02a67075fcb5deb50eb7408aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
EAPOL frames are used for authentication and key management between the
AP and each individual STA associated in the BSS. Those frames are not
supposed to be sent by one associated STA to another associated STA
(either unicast for broadcast/multicast).
Similarly, in 802.11 they're supposed to be sent to the authenticator
(AP) address.
Since it is possible for unexpected EAPOL frames to result in misbehavior
in supplicant implementations, it is better for the AP to not allow such
cases to be forwarded to other clients either directly, or indirectly if
the AP interface is part of a bridge.
Accept EAPOL (control port) frames only if they're transmitted to the
own address, or, due to interoperability concerns, to the PAE group
address.
Disable forwarding of EAPOL (or well, the configured control port
protocol) frames back to wireless medium in all cases. Previously, these
frames were accepted from fully authenticated and authorized stations
and also from unauthenticated stations for one of the cases.
Additionally, to avoid forwarding by the bridge, rewrite the PAE group
address case to the local MAC address.
Cc: stable@vger.kernel.org
Co-developed-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.cb327ed0cabe.Ib7dcffa2a31f0913d660de65ba3c8aca75b1d10f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Similar to the issues fixed in previous patches, TKIP and WEP
should be protected even if for TKIP we have the Michael MIC
protecting it, and WEP is broken anyway.
However, this also somewhat protects potential other algorithms
that drivers might implement.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511200110.430e8c202313.Ia37e4e5b6b3eaab1a5ae050e015f6c92859dbe27@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As pointed out by Mathy Vanhoef, we implement the RX PN check
on fragmented frames incorrectly - we check against the last
received PN prior to the new frame, rather than to the one in
this frame itself.
Prior patches addressed the security issue here, but in order
to be able to reason better about the code, fix it to really
compare against the current frame's PN, not the last stored
one.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511200110.bfbc340ff071.Id0b690e581da7d03d76df90bb0e3fd55930bc8a0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Prior patches protected against fragmentation cache attacks
by coloring keys, but this shows that it can lead to issues
when multiple stations use the same sequence number. Add a
fragment cache to struct sta_info (in addition to the one in
the interface) to separate fragments for different stations
properly.
This then automatically clear most of the fragment cache when a
station disconnects (or reassociates) from an AP, or when client
interfaces disconnect from the network, etc.
On the way, also fix the comment there since this brings us in line
with the recommendation in 802.11-2016 ("An AP should support ...").
Additionally, remove a useless condition (since there's no problem
purging an already empty list).
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511200110.fc35046b0d52.I1ef101e3784d13e8f6600d83de7ec9a3a45bcd52@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
With old ciphers (WEP and TKIP) we shouldn't be using A-MSDUs
since A-MSDUs are only supported if we know that they are, and
the only practical way for that is HT support which doesn't
support old ciphers.
However, we would normally accept them anyway. Since we check
the MMIC before deaggregating A-MSDUs, and the A-MSDU bit in
the QoS header is not protected in TKIP (or WEP), this enables
attacks similar to CVE-2020-24588. To prevent that, drop A-MSDUs
completely with old ciphers.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511200110.076543300172.I548e6e71f1ee9cad4b9a37bf212ae7db723587aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Mitigate A-MSDU injection attacks (CVE-2020-24588) by detecting if the
destination address of a subframe equals an RFC1042 (i.e., LLC/SNAP)
header, and if so dropping the complete A-MSDU frame. This mitigates
known attacks, although new (unknown) aggregation-based attacks may
remain possible.
This defense works because in A-MSDU aggregation injection attacks, a
normal encrypted Wi-Fi frame is turned into an A-MSDU frame. This means
the first 6 bytes of the first A-MSDU subframe correspond to an RFC1042
header. In other words, the destination MAC address of the first A-MSDU
subframe contains the start of an RFC1042 header during an aggregation
attack. We can detect this and thereby prevent this specific attack.
For details, see Section 7.2 of "Fragment and Forge: Breaking Wi-Fi
Through Frame Aggregation and Fragmentation".
Note that for kernel 4.9 and above this patch depends on "mac80211:
properly handle A-MSDUs that start with a rfc1042 header". Otherwise
this patch has no impact and attacks will remain possible.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.25d93176ddaf.I9e265b597f2cd23eb44573f35b625947b386a9de@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Properly parse A-MSDUs whose first 6 bytes happen to equal a rfc1042
header. This can occur in practice when the destination MAC address
equals AA:AA:03:00:00:00. More importantly, this simplifies the next
patch to mitigate A-MSDU injection attacks.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.0b2b886492f0.I23dd5d685fe16d3b0ec8106e8f01b59f499dffed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Simultaneously prevent mixed key attacks (CVE-2020-24587) and fragment
cache attacks (CVE-2020-24586). This is accomplished by assigning a
unique color to every key (per interface) and using this to track which
key was used to decrypt a fragment. When reassembling frames, it is
now checked whether all fragments were decrypted using the same key.
To assure that fragment cache attacks are also prevented, the ID that is
assigned to keys is unique even over (re)associations and (re)connects.
This means fragments separated by a (re)association or (re)connect will
not be reassembled. Because mac80211 now also prevents the reassembly of
mixed encrypted and plaintext fragments, all cache attacks are prevented.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.3f8290e59823.I622a67769ed39257327a362cfc09c812320eb979@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Do not mix plaintext and encrypted fragments in protected Wi-Fi
networks. This fixes CVE-2020-26147.
Previously, an attacker was able to first forward a legitimate encrypted
fragment towards a victim, followed by a plaintext fragment. The
encrypted and plaintext fragment would then be reassembled. For further
details see Section 6.3 and Appendix D in the paper "Fragment and Forge:
Breaking Wi-Fi Through Frame Aggregation and Fragmentation".
Because of this change there are now two equivalent conditions in the
code to determine if a received fragment requires sequential PNs, so we
also move this test to a separate function to make the code easier to
maintain.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.30c4394bb835.I5acfdb552cc1d20c339c262315950b3eac491397@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The rocket driver and documentation were removed in this commit, but
the corresponding entry in index.rst was not removed.
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Fixes: 3b00b6af7a5b ("tty: rocket, remove the driver")
Link: https://lore.kernel.org/r/20210511134937.2442291-1-desmondcheongzx@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Probably because the original file was pre-processed by some
tool, both i40e.rst and iavf.rst files are using this character:
- U+2013 ('–'): EN DASH
meaning an hyphen when calling a command line application, which
is obviously wrong. So, replace them by an hyphen, ensuring
that it will be properly displayed as literals when building
the documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/95eb2a48d0ca3528780ce0dfce64359977fa8cb3.1620744606.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
While UTF-8 characters can be used at the Linux documentation,
the best is to use them only when ASCII doesn't offer a good replacement.
So, replace the occurences of the following UTF-8 characters:
- U+2013 ('–'): EN DASH
In this specific case, EN DASH was used instead of a minus
sign. So, replace it by a single hyphen.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/73b3c7c1eef5c12ddc941624d23689313bd56529.1620744606.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The KernelVersion tag contains some spurious UTF-8 characters
for no reason. Drop them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6d774ad6cb3795a177309503a39f8f1b5e309d64.1620744606.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Those two files have this character:
- U+00ac ('¬'): NOT SIGN
at the end of the first line, apparently for no reason. Drop them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6cd3f0b47568fecb7889fd18d1d744c3aaf73866.1620744606.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This file was converted from a LaTeX one. The conversion used
some UTF-8 characters at the literal blocks. Replace them
by normal ASCII characters.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/79c3f482da17ea48d69b6e6ad1b7fb102b9dd7bf.1620744606.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"Handle transaction start error in btrfs_fileattr_set()
This is fix for code introduced by the new fileattr merge"
* tag 'for-5.13-rc1-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: handle transaction start error in btrfs_fileattr_set
|
|
Host can send invalid commands and flood the target with error messages.
Demote the error message from pr_err() to pr_debug() in
nvmet_parse_fabrics_cmd() and nvmet_parse_connect_cmd().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Use the helper nvmet_report_invalid_opcode() to report invalid opcode
so we can remove the duplicate code.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Host can send invalid commands and flood the target with error messages
for the discovery controller. Demote the error message from pr_err() to
pr_debug( in nvmet_parse_discovery_cmd().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When running some traffic and taking down the link on peer, a
retry counter exceeded error is received. This leads to
nvmet_rdma_error_comp which tried accessing the cq_context to
obtain the queue. The cq_context is no longer valid after the
fix to use shared CQ mechanism and should be obtained similar
to how it is obtained in other functions from the wc->qp.
[ 905.786331] nvmet_rdma: SEND for CQE 0x00000000e3337f90 failed with status transport retry counter exceeded (12).
[ 905.832048] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
[ 905.839919] PGD 0 P4D 0
[ 905.842464] Oops: 0000 1 SMP NOPTI
[ 905.846144] CPU: 13 PID: 1557 Comm: kworker/13:1H Kdump: loaded Tainted: G OE --------- - - 4.18.0-304.el8.x86_64 #1
[ 905.872135] RIP: 0010:nvmet_rdma_error_comp+0x5/0x1b [nvmet_rdma]
[ 905.878259] Code: 19 4f c0 e8 89 b3 a5 f6 e9 5b e0 ff ff 0f b7 75 14 4c 89 ea 48 c7 c7 08 1a 4f c0 e8 71 b3 a5 f6 e9 4b e0 ff ff 0f 1f 44 00 00 <48> 8b 47 48 48 85 c0 74 08 48 89 c7 e9 98 bf 49 00 e9 c3 e3 ff ff
[ 905.897135] RSP: 0018:ffffab601c45fe28 EFLAGS: 00010246
[ 905.902387] RAX: 0000000000000065 RBX: ffff9e729ea2f800 RCX: 0000000000000000
[ 905.909558] RDX: 0000000000000000 RSI: ffff9e72df9567c8 RDI: 0000000000000000
[ 905.916731] RBP: ffff9e729ea2b400 R08: 000000000000074d R09: 0000000000000074
[ 905.923903] R10: 0000000000000000 R11: ffffab601c45fcc0 R12: 0000000000000010
[ 905.931074] R13: 0000000000000000 R14: 0000000000000010 R15: ffff9e729ea2f400
[ 905.938247] FS: 0000000000000000(0000) GS:ffff9e72df940000(0000) knlGS:0000000000000000
[ 905.938249] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 905.950067] nvmet_rdma: SEND for CQE 0x00000000c7356cca failed with status transport retry counter exceeded (12).
[ 905.961855] CR2: 0000000000000048 CR3: 000000678d010004 CR4: 00000000007706e0
[ 905.961855] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 905.961856] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 905.961857] PKRU: 55555554
[ 906.010315] Call Trace:
[ 906.012778] __ib_process_cq+0x89/0x170 [ib_core]
[ 906.017509] ib_cq_poll_work+0x26/0x80 [ib_core]
[ 906.022152] process_one_work+0x1a7/0x360
[ 906.026182] ? create_worker+0x1a0/0x1a0
[ 906.030123] worker_thread+0x30/0x390
[ 906.033802] ? create_worker+0x1a0/0x1a0
[ 906.037744] kthread+0x116/0x130
[ 906.040988] ? kthread_flush_work_fn+0x10/0x10
[ 906.045456] ret_from_fork+0x1f/0x40
Fixes: ca0f1a8055be2 ("nvmet-rdma: use new shared CQ mechanism")
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When handling passthru commands, for inline bio allocation we only
consider the transfer size. This works well when req->sg_cnt fits into
the req->inline_bvec, but it will result in the early return from
bio_add_hw_page() when req->sg_cnt > NVMET_MAX_INLINE_BVEC.
Consider an I/O of size 32768 and first buffer is not aligned to the
page boundary, then I/O is split in following manner :-
[ 2206.256140] nvmet: sg->length 3440 sg->offset 656
[ 2206.256144] nvmet: sg->length 4096 sg->offset 0
[ 2206.256148] nvmet: sg->length 4096 sg->offset 0
[ 2206.256152] nvmet: sg->length 4096 sg->offset 0
[ 2206.256155] nvmet: sg->length 4096 sg->offset 0
[ 2206.256159] nvmet: sg->length 4096 sg->offset 0
[ 2206.256163] nvmet: sg->length 4096 sg->offset 0
[ 2206.256166] nvmet: sg->length 4096 sg->offset 0
[ 2206.256170] nvmet: sg->length 656 sg->offset 0
Now the req->transfer_size == NVMET_MAX_INLINE_DATA_LEN i.e. 32768, but
the req->sg_cnt is (9) > NVMET_MAX_INLINE_BIOVEC which is (8).
This will result in early return in the following code path :-
nvmet_bdev_execute_rw()
bio_add_pc_page()
bio_add_hw_page()
if (bio_full(bio, len))
return 0;
Use previously introduced helper nvmet_use_inline_bvec() to consider
req->sg_cnt when using inline bio. This only affects nvme-loop
transport.
Fixes: dab3902b19a0 ("nvmet: use inline bio for passthru fast path")
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When handling rw commands, for inline bio case we only consider
transfer size. This works well when req->sg_cnt fits into the
req->inline_bvec, but it will result in the warning in
__bio_add_page() when req->sg_cnt > NVMET_MAX_INLINE_BVEC.
Consider an I/O size 32768 and first page is not aligned to the page
boundary, then I/O is split in following manner :-
[ 2206.256140] nvmet: sg->length 3440 sg->offset 656
[ 2206.256144] nvmet: sg->length 4096 sg->offset 0
[ 2206.256148] nvmet: sg->length 4096 sg->offset 0
[ 2206.256152] nvmet: sg->length 4096 sg->offset 0
[ 2206.256155] nvmet: sg->length 4096 sg->offset 0
[ 2206.256159] nvmet: sg->length 4096 sg->offset 0
[ 2206.256163] nvmet: sg->length 4096 sg->offset 0
[ 2206.256166] nvmet: sg->length 4096 sg->offset 0
[ 2206.256170] nvmet: sg->length 656 sg->offset 0
Now the req->transfer_size == NVMET_MAX_INLINE_DATA_LEN i.e. 32768, but
the req->sg_cnt is (9) > NVMET_MAX_INLINE_BIOVEC which is (8).
This will result in the following warning message :-
nvmet_bdev_execute_rw()
bio_add_page()
__bio_add_page()
WARN_ON_ONCE(bio_full(bio, len));
This scenario is very hard to reproduce on the nvme-loop transport only
with rw commands issued with the passthru IOCTL interface from the host
application and the data buffer is allocated with the malloc() and not
the posix_memalign().
Fixes: 73383adfad24 ("nvmet: don't split large I/Os unconditionally")
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
nvme_init_identify and thus nvme_mpath_init can be called multiple
times and thus must not overwrite potentially initialized or in-use
fields. Split out a helper for the basic initialization when the
controller is initialized and make sure the init_identify path does
not blindly change in-use data structures.
Fixes: 0d0b660f214d ("nvme: add ANA support")
Reported-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
Krzysztof has been carrying out PCI patches review for a long time and
he has been instrumental in driving PCI host/endpoint controller drivers
improvements.
Make his role official.
Link: https://lore.kernel.org/r/20210511150003.1592-1-lorenzo.pieralisi@arm.com
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Krzysztof Wilczyński <kw@linux.com>
|
|
cs42l42 does not support standard burst transfers so the use_single_read
and use_single_write flags must be set in the regmap config.
Because of this bug, the patch:
commit 0a0eb567e1d4 ("ASoC: cs42l42: Minor error paths fixups")
broke cs42l42 probe() because without the use_single_* flags it causes
regmap to issue a burst read.
However, the missing use_single_* could cause problems anyway because the
regmap cache can attempt burst transfers if these flags are not set.
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511132855.27159-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
audio-graph is using cpus->dai_name / codecs->dai_name for
dailink->name.
In graph_parse_node(), xxx->dai_name is got by
snd_soc_get_dai_name(), but it might be removed soon by
asoc_simple_canonicalize_cpu().
The order should be
*1) call snd_soc_get_dai_name()
2) create dailink name
*3) call asoc_simple_canonicalize_cpu()
* are implemented in graph_parse_node().
This patch remove 3) from graph_parse_node()
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Fixes: 8859f809c7d5813 ("ASoC: audio-graph: add graph_parse_node()")
Fixes: e51237b8d305225 ("ASoC: audio-graph: add graph_link_init()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/87cztyawzr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use local variable at local area only.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/87eeeeax16.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|