summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-04-20perf tools: Move timestamp routines from util.h to time-utils.hArnaldo Carvalho de Melo
We already have a header for time utilities, so use it. Link: http://lkml.kernel.org/n/tip-sijzpbvutlg0c3oxn49hy9ca@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-20perf tools: Move units conversion/formatting routines to separate objectArnaldo Carvalho de Melo
Out of util.h, to disentangle it a bit more. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-vpksyj3w5fk9t8s6mxmkajyr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-20perf tools: Add signal.h to places using its definitionsArnaldo Carvalho de Melo
And remove it from util.h, disentangling it a bit more. Link: http://lkml.kernel.org/n/tip-2zg9s5nx90yde64j3g4z2uhk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-20perf unwind: Provide only forward declarations for pointer typesArnaldo Carvalho de Melo
No need to drag the headers, helps in untangling them and reducing build time. Link: http://lkml.kernel.org/n/tip-l8soqph92duyw5jdha0fij8b@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-20blk-throttle: fix unused variable warning with BLK_DEV_THROTTLING_LOW=nJens Axboe
We trigger this warning: block/blk-throttle.c: In function ‘blk_throtl_bio’: block/blk-throttle.c:2042:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] int ret; ^~~ since we only assign 'ret' if BLK_DEV_THROTTLING_LOW is off, we never check it. Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20bfq: fix compile error if CONFIG_CGROUPS=nJens Axboe
If we don't have CGROUPS enabled, the compile ends in the following misery: In file included from ../block/bfq-iosched.c:105:0: ../block/bfq-iosched.h:819:22: error: array type has incomplete element type extern struct cftype bfq_blkcg_legacy_files[]; ^ ../block/bfq-iosched.h:820:22: error: array type has incomplete element type extern struct cftype bfq_blkg_files[]; ^ Move the declarations under the right ifdef. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
A function in kernel/bpf/syscall.c which got a bug fix in 'net' was moved to kernel/bpf/verifier.c in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20block, bfq: don't dereference bic before null checking itColin Ian King
The call to bfq_check_ioprio_change will dereference bic, however, the null check for bic is after this call. Move the the null check on bic to before the call to avoid any potential null pointer dereference issues. Detected by CoverityScan, CID#1430138 ("Dereference before null check") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20ligtnvm: fix double blk_put_queue on same queueRakesh Pandit
On an error path in NVM_DEV_CREATE ioctl blk_put_queue is being called twice: one via blk_cleanup_queue and another via put_disk. Straight fix seems to remove queue pointer so that disk_release never ends up caling blk_put_queue again. [ 391.808827] WARNING: CPU: 1 PID: 1250 at lib/refcount.c:128 refcount_sub_and_test+0x70/0x80 [ 391.808830] refcount_t: underflow; use-after-free. [ 391.808832] Modules linked in: nf_conntrack_netbios_ns............ [ 391.809052] CPU: 1 PID: 1250 Comm: nvme Not tainted......... [ 391.809057] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 391.809060] Call Trace: [ 391.809079] dump_stack+0x63/0x86 [ 391.809094] __warn+0xcb/0xf0 [ 391.809103] warn_slowpath_fmt+0x5f/0x80 [ 391.809118] refcount_sub_and_test+0x70/0x80 [ 391.809125] refcount_dec_and_test+0x11/0x20 [ 391.809136] kobject_put+0x1f/0x60 [ 391.809149] blk_put_queue+0x15/0x20 [ 391.809159] disk_release+0xae/0xf0 [ 391.809172] device_release+0x32/0x90 [ 391.809184] kobject_release+0x6a/0x170 [ 391.809196] kobject_put+0x2f/0x60 [ 391.809206] put_disk+0x17/0x20 [ 391.809219] nvm_ioctl_dev_create.isra.16+0x897/0xa30 [ 391.809236] nvm_ctl_ioctl+0x23c/0x4c0 [ 391.809248] do_vfs_ioctl+0xa3/0x5f0 [ 391.809258] SyS_ioctl+0x79/0x90 [ 391.809271] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 391.809280] RIP: 0033:0x7f5d3ef363c7 [ 391.809286] RSP: 002b:00007ffc72ed8d78 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [ 391.809296] RAX: ffffffffffffffda RBX: 00007ffc72edb552 RCX: 00007f5d3ef363c7 [ 391.809301] RDX: 00007ffc72ed8d90 RSI: 0000000040804c22 RDI: 0000000000000003 [ 391.809306] RBP: 0000000000000001 R08: 0000000000000020 R09: 0000000000000001 [ 391.809311] R10: 000000000000053f R11: 0000000000000206 R12: 0000000000000000 [ 391.809316] R13: 0000000000000000 R14: 00007ffc72edb58d R15: 00007ffc72edb581 Signed-off-by: Rakesh Pandit <rakesh@tuxera.com> Reviewed-by: Matias Bjørling <matias@cnexlabs.com> Fixes: 7d1ef2f408ab "lightnvm: fix cleanup order of disk on init error" Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20irqchip/mips-gic: Replace static map with dynamicMatt Redfearn
Commit 4cfffcfa5106 ("irqchip/mips-gic: Fix local interrupts") fixed local interrupts by creating virq mappings for them all at startup. Unfortunately this change broke legacy IRQ controllers in the same system, such as the i8259 on the Malta platform, as it allocates virq numbers that were expected to be available for the legacy controller. Instead of creating the mappings statically when the GIC is probed, re-introduce the irq domain .map function, removed by commit e875bd66dfb ("irqchip/mips-gic: Fix local interrupts") and use it to set up the irq handler and chip. Since a good deal of the required functionality is already implemented by gic_irq_domain_alloc, repurpose that function for gic_irq_domain_map and add a new gic_irq_domain_alloc which wraps gic_irq_domain_map with the necessary conversion. This change fixes the legacy interrupt controller of the Malta platform without breaking the perf interrupt fixed by commit e875bd66dfb ("irqchip/mips-gic: Fix local interrupts"). Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Link: http://lkml.kernel.org/r/1492679256-14513-4-git-send-email-matt.redfearn@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-20irqchip/mips-gic: Remove device IRQ domainPaul Burton
In commit c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain") Qais indicates that he felt having a separate device IRQ domain was cleaner, but along with everyone else I'm aware of touching this driver I disagree. Remove the separate device IRQ domain so that we simply have the main GIC IRQ domain used for devices, and an IPI IRQ domain as a child. The logic for handling the device interrupts & IPIs is cleanly separated into the appropriate domain ops, making it much easier to reason about what the driver is doing than the previous approach where the 2 child domains had to call up to their parent, which had to handle both types of interrupt & had all sorts of weird & wonderful duplication or outright clobbering of setup performed by multiple domains. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Link: http://lkml.kernel.org/r/1492679256-14513-3-git-send-email-matt.redfearn@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-20irqchip/mips-gic: Separate IPI reservation & usage trackingPaul Burton
Since commit 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") introduced the GIC IPI IRQ domain we have tracked both reservation of interrupts & their use with a single bitmap - ipi_resrv. If an interrupt is reserved for use as an IPI but not actually in use then the appropriate bit is set in ipi_resrv. If an interrupt is either not reserved for use as an IPI or has been allocated as one then the appropriate bit is clear in ipi_resrv. Unfortunately this means that checking whether a bit is set in ipi_resrv to prevent IPI interrupts being allocated for use with a device is broken, because if the interrupt has been allocated as an IPI first then its bit will be clear. Fix this by separating the tracking of IPI reservation & usage, introducing a separate ipi_available bitmap for the latter. This means that ipi_resrv will now always have bits set corresponding to all interrupts reserved for use as IPIs, whether or not they have been allocated yet, and therefore that checking it when allocating device interrupts works as expected. Fixes: 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Link: http://lkml.kernel.org/r/1492679256-14513-2-git-send-email-matt.redfearn@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-20Merge branch 'linus' into irq/coreThomas Gleixner
Pick up upstream fixes to avoid conflicts with pending patches.
2017-04-20genirq/affinity: Fix calculating vectors to assignKeith Busch
The vectors_per_node is calculated from the remaining available vectors. The current vector starts after pre_vectors, so we need to subtract that from the current to properly account for the number of remaining vectors to assign. Fixes: 3412386b531 ("irq/affinity: Fix extra vecs calculation") Reported-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Link: http://lkml.kernel.org/r/1492645870-13019-1-git-send-email-keith.busch@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-20x86/intel_rdt: Return error for incorrect resource names in schemataVikas Shivappa
When schemata parses the resource names it does not return an error if it detects incorrect resource names and fails quietly. This happens because for_each_enabled_rdt_resource(r) leaves "r" pointing beyond the end of the rdt_resources_all[] array, and the check for !r->name results in an out of bounds access. Split the resource parsing part into a helper function to avoid the issue. [ tglx: Made it readable by splitting the parser loop out into a function ] Reported-by: Prakhya, Sai Praneeth <sai.praneeth.prakhya@intel.com> Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Tested-by: Prakhya, Sai Praneeth <sai.praneeth.prakhya@intel.com> Cc: fenghua.yu@intel.com Cc: tony.luck@intel.com Cc: ravi.v.shankar@intel.com Cc: vikas.shivappa@intel.com Link: http://lkml.kernel.org/r/1492645804-17465-4-git-send-email-vikas.shivappa@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-20x86/intel_rdt: Trim whitespace while parsing schemata inputVikas Shivappa
Schemata is displayed in tabular format which introduces some whitespace to show data in a tabular format. Writing back the same data fails as the parser does not handle the whitespace. Trim the leading and trailing whitespace before parsing. Reported-by: Prakhya, Sai Praneeth <sai.praneeth.prakhya@intel.com> Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Tested-by: Prakhya, Sai Praneeth <sai.praneeth.prakhya@intel.com> Cc: fenghua.yu@intel.com Cc: tony.luck@intel.com Cc: ravi.v.shankar@intel.com Cc: vikas.shivappa@intel.com Link: http://lkml.kernel.org/r/1492645804-17465-3-git-send-email-vikas.shivappa@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-20x86/intel_rdt: Fix padding when resource is enabled via mountVikas Shivappa
Currently max width of 'resource name' and 'resource data' is being initialized based on 'enabled resources' during boot. But the mount can enable different capable resources at a later time which upsets the tabular format of schemata. Fix this to be based on 'all capable' resources. Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com> Tested-by: Prakhya, Sai Praneeth <sai.praneeth.prakhya@intel.com> Cc: fenghua.yu@intel.com Cc: tony.luck@intel.com Cc: ravi.v.shankar@intel.com Cc: vikas.shivappa@intel.com Link: http://lkml.kernel.org/r/1492645804-17465-2-git-send-email-vikas.shivappa@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-20x86/irq: Optimize free vector check in the CPU offline pathChen Yu
Before offlining a CPU its required to check whether there are enough free irq vectors available so interrupts can be migrated away from the CPU. This check is executed whether its required or not and neither stops searching when the number of required free vectors are reached. Bypass the free vector check if the current CPU has no irq to migrate and leave the for_each_online_cpu() loop when the free vector count reaches the number of required vectors. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Len Brown <lenb@kernel.orq> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1492357410-510-1-git-send-email-yu.c.chen@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-20timer/sysclt: Restrict timer migration sysctl values to 0 and 1Myungho Jung
timer_migration sysctl acts as a boolean switch, so the allowed values should be restricted to 0 and 1. Add the necessary extra fields to the sysctl table entry to enforce that. [ tglx: Rewrote changelog ] Signed-off-by: Myungho Jung <mhjungk@gmail.com> Link: http://lkml.kernel.org/r/1492640690-3550-1-git-send-email-mhjungk@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-20arm64/arch_timer: Mark errata handlers as __maybe_unusedArnd Bergmann
In some rare randconfig builds, we end up with two functions being entirely unused: drivers/clocksource/arm_arch_timer.c:342:12: error: 'erratum_set_next_event_tval_phys' defined but not used [-Werror=unused-function] static int erratum_set_next_event_tval_phys(unsigned long evt, drivers/clocksource/arm_arch_timer.c:335:12: error: 'erratum_set_next_event_tval_virt' defined but not used [-Werror=unused-function] static int erratum_set_next_event_tval_virt(unsigned long evt, We could add an #ifdef around them, but we would already have to check for several symbols there and there is a chance this would get more complicated over time, so marking them as __maybe_unused is the simplest way to avoid the harmless warnings. Fixes: 01d3e3ff2608 ("arm64: arch_timer: Rework the set_next_event workarounds") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Christoffer Dall <christoffer.dall@linaro.org> Link: http://lkml.kernel.org/r/20170419173737.3846098-1-arnd@arndb.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-20Clocksource/mips-gic: Remove redundant non devicetree initMatt Redfearn
Malta was the only platform probing this driver from platform code without using device tree. With that code removed, gic_clocksource_init is redundant so remove it. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Ralf Baechle <ralf@linux-mips.org> Link: http://lkml.kernel.org/r/1492604806-23420-2-git-send-email-matt.redfearn@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-20MIPS/Malta: Probe gic-timer via devicetreeMatt Redfearn
The Malta platform is the only platform remaining to probe the GIC clocksource via gic_clocksource_init. This route hardcodes an expected virq number based on MIPS_GIC_IRQ_BASE, which can be fragile to the eventual virq layout. Instread, probe the driver using the preferred and more modern devicetree method. Before the driver is probed, set the "clock-frequency" property of the devicetree node to the value detected by Malta platform code. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Ralf Baechle <ralf@linux-mips.org> Link: http://lkml.kernel.org/r/1492604806-23420-1-git-send-email-matt.redfearn@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-20clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASKMatthias Kaehlcke
Besides reusing existing code this removes the special case handling for 64-bit masks, which causes clang to raise a shift count overflow warning due to https://bugs.llvm.org//show_bug.cgi?id=10030. Suggested-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Cc: Grant Grundler <grundler@chromium.org> Cc: Greg Hackmann <ghackmann@google.com> Cc: Michael Davidson <md@google.com> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20170418233037.70990-1-mka@chromium.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-20mmc: sdhci-esdhc-imx: increase the pad I/O drive strength for DDR50 cardHaibo Chen
Currently for DDR50 card, it need tuning in default. We meet tuning fail issue for DDR50 card and some data CRC error when DDR50 sd card works. This is because the default pad I/O drive strength can't make sure DDR50 card work stable. So increase the pad I/O drive strength for DDR50 card, and use pins_100mhz. This fixes DDR50 card support for IMX since DDR50 tuning was enabled from commit 9faac7b95ea4 ("mmc: sdhci: enable tuning for DDR50") Tested-and-reported-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org # v4.4+ Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-20s390/kvm: Add use_cmma field to mm_context_tClaudio Imbrenda
Add use_cmma field to mm_context_t, like we do for storage keys. Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Acked-by: Janosch Frank <frankja@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-04-20s390/kvm: Add PGSTE manipulation functionsClaudio Imbrenda
Add PGSTE manipulation functions: * set_pgste_bits sets specific bits in a PGSTE * get_pgste returns the whole PGSTE * pgste_perform_essa manipulates a PGSTE to set specific storage states * ESSA_[SG]ET_* macros used to indicate the action for manipulate_pgste Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Reviewed-by: Janosch Frank <frankja@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-04-20rt2800: fix mt7620 E2 channel registersTomislav Požega
update RF register 47 and 54 values according to vendor driver Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rt2800: fix mt7620 vco calibration registersTomislav Požega
Use register values from init LNA function instead of the ones from restore LNA function. Apply register values based on rx path configuration. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rt2800: do VCO calibration after programming ALCDaniel Golle
Somehow AP doesn't come up and the first scan fails if we don't do VCO calibration every time. The vendor driver duplicates the VCO calibration function into the channel switching logic, we can do the same with less duplication. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rt2800: fix LNA gain assignment for MT7620Daniel Golle
The base value used for MT7620 differs from Rt5392 which resulted in quite bad RX signal quality. Fix this by using the correct base value as well as the LNA calibration values for HT20. Reported-by: Tom Psyborg <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20ACPI / PMIC: Stop xpower OPRegion handler relying on IIOHans de Goede
The intel_pmic_xpower code provides an OPRegion handler, which must be available before other drivers using it are loaded, which can only be ensured if both the mfd and opregion drivers are built in, which is why the Kconfig option for intel_pmic_xpower is a bool. The use of IIO is causing trouble for generic distro configs here as distros will typically want to build IIO drivers as modules and there really is no reason to use IIO here. The reading of the ADC value is a single regmap_bulk_read, which is already protected against races by the regmap-lock. This commit removes the use of IIO, allowing distros to enable the driver without needing to built IIO in and also actually simplifies the code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-20ACPI / PMIC: Add opregion driver for Intel CHT Whiskey Cove PMICHans de Goede
Add opregion driver for Intel CHT Whiskey Cove PMIC, based on various non upstreamed CHT Whiskey Cove PMIC patches. This does not include support for the Thermal opregion (DPTF) due to lacking documentation. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-20HID: wacom: Override incorrect logical maximum contact identifierJason Gerecke
It apears that devices designed around Wacom's G11 chipset (e.g. Lenovo ThinkPad Yoga 260, Lenovo ThinkPad X1 Yoga, Dell XPS 12 9250, Dell Venue 8 Pro 5855, etc.) suffer from a common issue in their HID descriptors. The logical maximum is not updated for the "Contact Identifier" usage, leaving it as just "1" despite these devices being capable of tracking far more touches. Commit 60a221869803 began ignoring usages with out-of-range values, causing problems for devices based on this chipset. Touches after the first will have an out-of-range Contact Identifier, and ignoring that usage will cause the kernel to incorrectly slot each finger's events (along with all the knock-on userspace effects that entails). This commit checks for these buggy descriptors and updates the maximum where required. Prior chipsets have used "255" as the maximum (and the G11, at least, doesn't seem to actually use IDs outside the range of 1..CONTACTMAX) so continue using this value. Cc: stable@vger.kernel.org Fixes: 60a221869803 ("HID: wacom: generic: add support for touchring") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-04-20Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.12. Major changes: ath9k * add support for Dell Wireless 1601 PCI device * add debugfs file to manually override noise floor ath10k * bump up FW API to 6 for a new QCA6174 firmware branch wil6210 * support 8 kB RX buffers
2017-04-20sched/x86: Update reschedule warning textPrarit Bhargava
Modify the reschedule warning to output the offline CPU number and use a better debug message. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1492518305-3808-1-git-send-email-prarit@redhat.com [ Tweaked the warning message. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-20Merge tag 'perf-core-for-mingo-4.12-20170419' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core cleanups from Arnaldo Carvalho de Melo: - Introduce new header files out of the hodge-podge that util/util.h became, trying to disentangle the includes hell that all C projects end up growing. This should help in build times, as changes to seemingly unrelated files (util.h included tons of headers) won't trigger a rebuild of most object files. - Use equivalent facilities found in the kernel source code base originated tools/include/ header files, such as __stringify(), ARRAY_SIZE, that has extra checks (__must_be_array()), etc. - For that get some more files from the kernel sources, like include/linux/bug.h, some just with the bits needed at this time. - Use the headers where facilities declared in them are used, such as PRIxu(32,64) macros (inttypes.h), errno defines (errno.h), etc. - Remove various leftovers from the initial code base we copied from git.git: FLEX_ARRAY, etc. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-20Merge branch 'WIP.x86/process' into perf/coreIngo Molnar
2017-04-20x86/reboot: Turn off KVM when halting a CPUTiantian Feng
A CPU in VMX root mode will ignore INIT signals and will fail to bring up the APs after reboot. Therefore, on a panic we disable VMX on all CPUs before rebooting or triggering kdump. Do this when halting the machine as well, in case a firmware-level reboot does not perform a cold reset for all processors. Without doing this, rebooting the host may hang. Signed-off-by: Tiantian Feng <fengtiantian@huawei.com> Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> [ Rewritten commit message. ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/20170419161839.30550-1-pbonzini@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-20x86/boot: Fix BSS corruption/overwrite bug in early x86 kernel startupAshish Kalra
The minimum size for a new stack (512 bytes) setup for arch/x86/boot components when the bootloader does not setup/provide a stack for the early boot components is not "enough". The setup code executing as part of early kernel startup code, uses the stack beyond 512 bytes and accidentally overwrites and corrupts part of the BSS section. This is exposed mostly in the early video setup code, where it was corrupting BSS variables like force_x, force_y, which in-turn affected kernel parameters such as screen_info (screen_info.orig_video_cols) and later caused an exception/panic in console_init(). Most recent boot loaders setup the stack for early boot components, so this stack overwriting into BSS section issue has not been exposed. Signed-off-by: Ashish Kalra <ashish@bluestacks.com> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170419152015.10011-1-ashishkalra@Ashishs-MacBook-Pro.local Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-20Merge tag 'iwlwifi-next-for-kalle-2017-04-19-2' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Another series of patches intended for v4.12. These are the changes: * Heavy work for the A000 device series; * Some cleanup patches; * A few fixes; * Dynamic SAR support; * Geographical SAR support; * Support a few new PCI device IDs;
2017-04-20nubus: Add MVC and VSC video card definitionsFinn Thain
Also move the NUBUS_DRHW_APPLE_JET definition, for numerical order. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-04-20nubus: Clean up whitespaceFinn Thain
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> [geert: rebased] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-04-20nubus: Clean up printk callsDavid Huggins-Daines
Some long forgotten changes from the linux-mac68k CVS: Fix swapped DrvrSW and DrvrHW values in printk message. Suppress debug printk messages. Avoid console_loglevel misuse. The original commits are these: http://linux-mac68k.cvs.sourceforge.net/viewvc/linux-mac68k/linux-mac68k/drivers/nubus/nubus.c?r1=1.22.2.1&r2=1.22.2.2&pathrev=linux-2_2 http://linux-mac68k.cvs.sourceforge.net/viewvc/linux-mac68k/linux-mac68k/drivers/nubus/nubus.c?r1=1.21&r2=1.22&pathrev=linux-2_2 The CVS commits fell short of removing all of the misuse of console_loglevel in nubus_add_board() so I finished the job. I've also added some missing message severity levels and converted a printk loop to the MAC address "%pM" format specifier. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-04-20nubus: Fix nubus_rewinddirDavid Huggins-Daines
A long forgotten fix from the linux-mac68k CVS: Initialize dir->done pointer in nubus_rewinddir(). The original commit is here: http://linux-mac68k.cvs.sourceforge.net/viewvc/linux-mac68k/linux-mac68k/drivers/nubus/nubus.c?r1=1.22&r2=1.22.2.1&pathrev=linux-2_2 Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-04-20m68k/mac: Clarify IOP message alloc/free confusionFinn Thain
The alloc/free metaphor used for IOP messages is misleading and can cause mistakes like the pointless msg2 temporary variable. Use a more meaningful name to help simplify the code. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-04-20m68k/mac: Adopt platform_device_register_simple()Finn Thain
These changes save 1014 bytes according to scripts/bloat-o-meter. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-04-20m68k/mac: Modernize printing of kernel messagesGeert Uytterhoeven
Convert from printk() to pr_*(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> [FT: Adjusted log message severity levels and retained bootinfo log] Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-04-20m68k/mac: IOP - Modernize printing of kernel messagesGeert Uytterhoeven
- Introduce helpers for printing debug messages, incl. dummies for validating format strings when debugging is disabled, - Convert from printk() to pr_*(), - Add missing continuations, - Drop superfluous casts. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> [FT: Renamed pr_iop* macros, adjusted log message severity and eliminated DEBUG_IOP] Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-04-20rtlwifi: btcoex: 21a 2ant: wifi is linking actionYan-Hsuan Chuang
When wifi is under scanning/linking/roaming, do not run the reset of the coex mechanism because these activities are important for wifi, just run the linking process and return. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-20rtlwifi: btcoex: 21a 2ant: just return when wifi is under ipsYan-Hsuan Chuang
If wifi is in power saving mode, do nothing. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> --- drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c | 6 ++++++ 1 file changed, 6 insertions(+) Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-15 01:27:55 +0000