summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-08-06[SCSI] ibmvfc: Fix terminate_rport_ioBrian King
The ibmvfc driver was incorrectly obtaining a scsi_target pointer from an fc_rport. The way it is coded ensures that ibmvfc's terminate_rport_io handler does absolutely nothing. Fix this up to iterate through affected devices differently, sending cancel and abort task set as appropriate. Without this patch, fast_io_fail_tmo is broken for ibmvfc. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] ibmvfc: Fix rport add/delete race resulting in oopsBrian King
Commit 43c8da907ccc656935d1085701f4db83385d8a59 introduced a race condition which can occur when adding/deleting rports. There are two possible threads now that can be deleting rports in the ibmvfc driver, which can result in list_del being called twice, resulting in an oops. This patch adds a new state to the ibmvfc_target struct to indicate the target has been removed from the list and is in the process of being deleted. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06Merge branches 'x86-rwsem-for-linus' and 'x86-gcc46-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-rwsem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, rwsem: Minor cleanups x86, rwsem: Stay on fast path when count > 0 in __up_write() * 'x86-gcc46-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, gcc-4.6: Fix set but not read variables x86, gcc-4.6: Avoid unused by set variables in rdmsr
2010-08-06Merge branch 'x86-setup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, setup: move isdigit.h to ctype.h, header files on top. x86, setup: enable early console output from the decompressor x86, setup: reorganize the early console setup x86, setup: Allow global variables and functions in the decompressor x86, setup: Only set early_serial_base after port is initialized x86, setup: Make the setup code also accept console=uart8250 x86, setup: Early-boot serial I/O support
2010-08-06Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Ioremap: fix wrong physical address handling in PAT code x86, tlb: Clean up and correct used type x86, iomap: Fix wrong page aligned size calculation in ioremapping code x86, mm: Create symbolic index into address_markers array x86, ioremap: Fix normal ram range check x86, ioremap: Fix incorrect physical address handling in PAE mode x86-64, mm: Initialize VDSO earlier on 64 bits x86, kmmio/mmiotrace: Fix double free of kmmio_fault_pages
2010-08-06Merge branches 'gemini' and 'misc' into develRussell King
2010-08-06Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6 into ↵Russell King
devel-stable Conflicts: drivers/net/irda/sh_irda.c
2010-08-06[SCSI] lpfc 8.3.16: Change LPFC driver version to 8.3.16James Smart
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] lpfc 8.3.16: FCoE Discovery and Failover FixesJames Smart
- Add support for re-reg'ing changed VPI w/o unregister VPI - Copy WWN and state from old nodelist when target DID change. - Clean up old nodelist rport and put the nodelist when target DID change. - Clear the VFI_REGISTERED flag when UNREG_VFI completes. - Made both checks of port_state against LPFC_FLOGI and LPFC_FDISC non-inclusive for ignoring CVL events. - Added logic to stop retrying of the ongoing PLOGI and FDISC if transitioned back to the FCF rediscovery state in reaction to CVL. - Removed the dependency of scanning of all the available FCF table entries for bulding round-robin bitmap. - Use the lpfc_sli4_fcf_rr_read_fcf_rec() in responding to individual New FCF found event. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06Merge branch 'devel' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable Conflicts: arch/arm/mach-pxa/palmt5.c arch/arm/mach-pxa/palmtreo.c
2010-08-06[SCSI] lpfc 8.3.16: SLI Additions, updates, and code cleanupJames Smart
- Remove unneeded Endian swap for Block Guard IOCB response - Add a check for mailbox active before issuing the heartbeat command - Correct heartbeat last_completion updates to avoid unneeded heartbeats - Add Security crypto support to CONFIG_PORT mailbox command - Add fips level and fips spec revision sysfs parameters - Remove duplicate setting of ext_byte_len fields in lpfc_bsg_issue_mbox - Switch call to memcpy_toio to __write32_copy to prevent unaligned 64 bit copy - Change log message 0318 from an error to a warning as it is not an error - Patch an incorrect call to lpfc_drain_txq on SLI-3 functions Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: um, x86: Cast to (u64 *) inside set_64bit() x86-32, asm: Directly access per-cpu GDT x86-64, asm: Directly access per-cpu IST x86, asm: Merge cmpxchg_486_u64() and cmpxchg8b_emu() x86, asm: Move cmpxchg emulation code to arch/x86/lib x86, asm: Clean up and simplify <asm/cmpxchg.h> x86, asm: Clean up and simplify set_64bit() x86: Add memory modify constraints to xchg() and cmpxchg() x86-64: Simplify loading initial_gs x86: Use symbolic MSR names x86: Remove redundant K6 MSRs
2010-08-06Merge branch 'x86-build-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, vdso: Don't quote $nm in the script for checking vdso references x86, vdso: Error out if the vdso contains external references
2010-08-06Merge branch 'x86-mrst-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mrst: make mrst_timer_options an enum x86, mrst: make mrst_identify_cpu() an inline returning enum x86, mrst: add more timer config options x86, mrst: add cpu type detection x86: detect scattered cpuid features earlier
2010-08-06[SCSI] pm8001: introduce missing kfreeJulia Lawall
Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; identifier f,f1; position p1,p2; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); <... when != x when != if (...) { <+...x...+> } when != (x) == NULL when != (x) != NULL when != (x) == 0 when != (x) != 0 ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return <+...x...+>; | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: jack wang <jack_wang@usish.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06Merge branch 'x86-hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, hwmon: Package Level Thermal/Power: pkgtemp documentation x86, hwmon: Package Level Thermal/Power: power limit x86, hwmon: Package Level Thermal/Power: thermal throttling handler x86, hwmon: Package Level Thermal/Power: pkgtemp hwmon driver
2010-08-06Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix keeping track of AMD C1E x86, cpu: Package Level Thermal Control, Power Limit Notification definitions x86, cpu: Export AMD errata definitions x86, cpu: Use AMD errata checking framework for erratum 383 x86, cpu: Clean up AMD erratum 400 workaround x86, cpu: AMD errata checking framework x86, cpu: Split addon_cpuid_features.c x86, cpu: Clean up formatting in cpufeature.h, remove override x86, cpu: Enumerate xsaveopt x86, cpu: Add xsaveopt cpufeature x86, cpu: Make init_scattered_cpuid_features() consider cpuid subleaves x86, cpu: Support the features flags in new CPUID leaf 7 x86, cpu: Add CPU flags for F16C and RDRND x86: Look for IA32_ENERGY_PERF_BIAS support x86, AMD: Extend support to future families x86, cacheinfo: Carve out L3 cache slot accessors x86, xsave: Cleanup return codes in check_for_xstate()
2010-08-06[SCSI] qla4xxx: Update driver version to 5.02.00-k3Vikas Chaudhary
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: Added AER support for ISP82xxLalit Chandivade
Added support for PCI error handling Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Poornima Vonti <poornima.vonti@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: Handle outstanding mbx cmds on hung f/w scenariosNilesh Javali
Outstanding mailbox commands, have no way to recover on f/w hung, and we timeout on waiting for mbx response. This in turn affects the recovery process as follows: - We might already be in dpc while waiting for mbx to complete, so recovery for that pci function will never get invoked. Reset Timeout (10 sec) is far less than mbx timeout (30 sec). - Other mbx cmds will get stuck due to serial mbx access. Solution is to identify fw-hung scenario and handle outstanding mbx commands to have an early-exit instead of waiting for response. Other mbx commands waiting for access will also do an early-exit if fw-hung is still applicable. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: updated mbx_sys_info struct to sync with FW 4.6.xVikas Chaudhary
Also, changed boundary checking from size of total structure to verification that we received the amount of data needed to cache inernally. This change will provide compatibility with mbx_sys_info structure sizes in both older and newer firmware versions. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: clear AF_DPC_SCHEDULED flage when exit from do_dpcVikas Chaudhary
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: Stop firmware before doing init firmware.Lalit Chandivade
If BIOS is enabled then drivers init firmware fails since BIOS has done the init once. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: Use the correct request queue.Vikas Chaudhary
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: set correct value in sess->recovery_tmoVikas Chaudhary
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06Blackfin: gpio: add a debounce stubMike Frysinger
The GPIO API was extended recently to include debounce functions, but since the on-chip Blackfin GPIO modules don't support this stuff, make a stub in the non-GPIOLIB case so drivers build properly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: update defconfigsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: remove CONFIG_MEM_GENERIC_BOARDChristian Dietrich
MEM_GENERIC_BOARD depends on GENERIC_BOARD, but this flag was removed in 4f25eb85d64640bc656e72917113a84701521b99, therefore all references to it from the source can be removed. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: dpmc: punt unnecessary RTC_ISTAT clearingMichael Hennerich
The RTC ISTAT bits do not affect wakeups, and the RTC driver already takes care of clearing this MMR when necessary. So drop the useless clearing in the core Blackfin power code. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: unify rotary encoder bitmasksMike Frysinger
Avoid duplication and ugly global namespace pollution. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: unify SDH/RSI bitmasksMike Frysinger
Avoid duplication and ugly global namespace pollution. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: BF54x: tweak DMAC MMR naming to match other portsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: TWI: clean up the MMR namesMike Frysinger
The standard short name for control is CTL and not CTRL. Use TWI0_xxx even on parts that only have one TWI bus to keep things simple. Drop all the cdef helpers since the bus driver takes care of everything. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: add EVT_OVERRIDE/IPRIO core MMR helpersMike Frysinger
These were partially defined, so fill out the def/cdef pieces properly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: add support for dynamic ftraceMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: add support for LZO compressed kernelsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: portmux: fix peripheral map overflow when requesting pinsMichael Hennerich
Some processors have groups of pins that aren't an even number of 16. This causes the array size calculation to under count the number of needed entries due to integer truncation. So on the BF51x, while we should have 3 bitmaps (41 / 16), we end up with 2 and pin requests for the 3rd bank end up scribbling over the top of the GPIO IRQ array. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: document SPI CS limitations with CPHA=0Michael Hennerich
With the Blackfin on-chip SPI peripheral, there is some logic tied to the CPHA bit whether the Slave Select Line is controlled by hardware (CPHA=0) or controlled by software (CPHA=1). However, the Linux SPI bus driver assumes that the Slave Select being asserted during the entire SPI transfer. So explain these small details for people who need certain SPI modes with standard CS behavior. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: remove useless and outdated documentationMichael Hennerich
The filesystem and cache files duplicate existing & better documents, and these contain outdated information. So punt them. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: BF51x/BF52x: support GPIO Hysteresis/Schmitt Trigger optionsMichael Hennerich
Newer parts have optional Hysteresis/Schmitt Trigger options to help with dirty signals. So add some kconfig options for tuning this and enable it by default for people. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: gpio/portmux: clean up whitespace corruptionMike Frysinger
Random tabs instead of spaces, mixes of the two, and unicode spaces instead of ascii spaces. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: make sure mmiowb inserts a write barrier with SSYNCMichael Hennerich
Add SSYNC to our implementation of I/O write barrier to ensure ordering of I/O space writes. This will make sure that writes following the barrier will arrive after all previous writes. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: fix DMA/cache bug when resuming from suspend to RAMMichael Hennerich
The dma_memcpy() function takes care of flushing different caches for us. Normally this is what we want, but when resuming from mem, we don't yet have caches enabled. If these functions happen to be placed into L1 mem (which is what we're trying to relocate), then things aren't going to work. So define a non-cache dma_memcpy() variant to utilize in situations like this. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: BF51x: fix handling of PH8 (the "internal" SPI0SEL4 pin)Mike Frysinger
Even though the PH8 pin is only internal to the processor packaging, it can be controlled like any other GPIO pin. Now that we have a proper GPIO define, we can fix the SPI0 CS4 define for the internal SPI flash. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: add a GPIO_DEFAULT_BOOT_SPI_CSMike Frysinger
This is parallel to the existing P_DEFAULT_BOOT_SPI_CS, but in terms of the GPIO value so it can be used with the normal gpio API. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: fix typo in hweight asmMike Frysinger
Run ONES on the incoming value rather than random garbage. This fixes random crashes with some networking code. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: BF51x: fix typo in HWAIT pin defineMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: BF54x: add ifdef protection to gpio headerMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: gpio: unify & clean up reserved map handlingMike Frysinger
The duplicated bit banging logic is getting out of hand, so unify the local API to make management a lot easier. This also makes the code a lot easier to follow. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06Blackfin: allow cache funcs to be in L1 for IFLUSH Anomaly 05000491Mike Frysinger
Anomaly 05000491 says that IFLUSH cannot have certain types of memory stalls triggered before it has completed in order to function correctly. One such condition is that it be in L1 instruction. So add a config option to move it there, default it to on, and throw up a warning when it is turned off and this anomaly exists. Since the anomaly should be worked around, we can drop the older method of calling IFLUSH multiple times. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
generated by cgit (git 2.34.1) at 2025-09-23 08:10:20 +0000