summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-23gpio: tqmx86: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-23gpio: thunderx: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Whereas in most cases we put the gpiochip_[enable|disable]_irq() calls in the .irq_mask() and .irq_unmask() callbacks, here we need to put them in the .irq_enable() and .irq_disable() callbacks, as this driver uses both .irq_mask() and .irq_mask_ack(). Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-23gpio: stmpe: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-23gpio: siox: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. In this case I had to figure out a way to get to the struct gpio_chip that would work even when the irq_chip is not part of the driver state container. I did this by just doing what most other GPIO drivers do and pass the state struct as data to devm_gpiochip_add_data() and rewrite accordingly. Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-23gpio: rda: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-23gpio: loongson1: Add DT supportKeguang Zhang
This patch adds DT support for Loongson-1 GPIO driver. Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-23dt-bindings: gpio: Add Loongson-1 GPIOKeguang Zhang
Add devicetree binding document for Loongson-1 GPIO. Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-23gpio: loongson1: Introduce ls1x_gpio_chip structKeguang Zhang
This patch introduces and allocates ls1x_gpio_chip struct containing gpio_chip and reg_base to avoid global gpio_reg_base. Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-23gpio: loongson1: Convert to SPDX identifierKeguang Zhang
Use SPDX-License-Identifier instead of the license text. The current author name is unofficial, change it to my real name. Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-22gpio: 104-dio-48e: Utilize no_status regmap-irq flagWilliam Breathitt Gray
The 104-DIO-48E lacks an IRQ status register. Rather than use the Clear Interrupt register as the status register, set the no_status flag to true and thus avoid such a hack. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-22Merge tag 'regmap-no-status' of ↵Bartosz Golaszewski
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into gpio/for-next regmap: Add no_status support This patch adds support for devices which don't support readback of individual interrupt statuses, we report all interrupts as firing and hope the consumers do the right thing.
2023-03-22gpio: pxa: remove unused gpio_is_pxa_type functionTom Rix
clang with W=1 reports drivers/gpio/gpio-pxa.c:174:19: error: unused function 'gpio_is_pxa_type' [-Werror,-Wunused-function] static inline int gpio_is_pxa_type(int type) ^ This function is not used, so remove it. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15gpio: fxl6408: add I2C GPIO expander driverEmanuele Ghidoli
Add minimal driver for Fairchild FXL6408 8-bit I2C-controlled GPIO expander using the generic regmap based GPIO driver (GPIO_REGMAP). The driver implements setting the GPIO direction, reading inputs and writing outputs. In addition to that the FXL6408 has the following functionalities: - allows to monitor input ports for data transitions with an interrupt pin - all inputs can be configured with pull-up or pull-down resistors Datasheet: https://www.onsemi.com/download/data-sheet/pdf/fxl6408-d.pdf Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Co-developed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> [Bartosz: order includes alphabetically] Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15dt-bindings: gpio: add fcs,fxl6408Emanuele Ghidoli
Add Fairchild FXL6408 8-bit I2C-controlled GPIO expander. Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15gpio: pcie-idio-24: Prune superfluous license boilerplateWilliam Breathitt Gray
The SPDX License Identifier line renders the GPL boilerplate text superfluous, so let's remove it. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15Documentation: gpio: Input mode is not true Hi-ZAndy Shevchenko
The true Hi-Z (a.k.a. high impedance) mode is when pin is completely disconnected from the chip. This includes input buffer as well. Nevertheless, some hardware may not support that mode and they are considering input only as Hi-Z, but more precisely it is an equivalent to that, in electronics it's basically "an antenna mode". Sligthly correct documentation to take the above into consideration. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15gpiolib: Use IRQ hardware number getter instead of direct accessAndy Shevchenko
IRQ framework provides special type and getter to transform the Linux IRQ to the hardware pin. Use that type and getter function instead of direct access. While at it, amend an indentation in a couple of places. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15gpiolib: Remove duplicative check in gpiod_find_and_request()Andy Shevchenko
The gpiod_find_by_fwnode() already checks for NULL and returns correct error code in case fwnode is invalid. Drop the respective check and assignment in the gpiod_find_and_request(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15gpiolib: Move gpiodevice_*() to gpiodev namespaceAndy Shevchenko
The functions that operates on the same device object would have the same namespace for better code understanding and maintenance. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15gpio: Use of_property_read_bool() for boolean propertiesRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15gpiolib: Get rid of devprop prefix in one functionAndy Shevchenko
The devprop prefix in the devprop_gpiochip_set_names() adds confusion. Get rid of it. Note we have more than one function in the same module that handles one or more device properties. This change will unify the naming schema for all of them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15gpio: raspberrypi-exp: mark OF related data as maybe unusedKrzysztof Kozlowski
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/gpio/gpio-raspberrypi-exp.c:237:34: error: ‘rpi_exp_gpio_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15gpio: xra1403: mark OF related data as maybe unusedKrzysztof Kozlowski
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/gpio/gpio-xra1403.c:198:34: error: ‘xra1403_spi_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15gpio: sama5d2-piobu: drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/gpio/gpio-sama5d2-piobu.c:230:34: error: ‘sama5d2_piobu_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15gpio: sifive: drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/gpio/gpio-sifive.c:263:34: error: ‘sifive_gpio_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15gpio: visconti: drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/gpio/gpio-visconti.c:187:34: error: ‘visconti_gpio_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15gpio: rcar: drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/gpio/gpio-rcar.c:435:34: error: ‘gpio_rcar_of_table’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15gpio: altera: drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/gpio/gpio-altera.c:324:34: error: ‘altera_gpio_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15gpio: ftgpio010: drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/gpio/gpio-ftgpio010.c:336:34: error: ‘ftgpio_gpio_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-15MAINTAINERS: gpio: xra1403: drop Semi MalinenKrzysztof Kozlowski
Emails bounce: 550 5.1.1 No such user - pp Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: sim: Deactivate device in reversed orderAndy Shevchenko
Run the steps to deactivate device in the reserved order to what it has been done in gpio_sim_device_activate_unlocked(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: loongson: Remove unnecessary .ownerJiapeng Chong
Remove .owner field if calls are used which set it automatically. ./drivers/gpio/gpio-loongson-64bit.c:225:3-8: No need to set .owner here. The core will do it. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4450 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: pcie-idio-24: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Acked-by: William Breathitt Gray <william.gray@linaro.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: pci-idio-16: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Acked-by: William Breathitt Gray <william.gray@linaro.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: omap: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. This driver require some special care: .irq_ack() was copied from dummy_irq_chip where it was defined as noop. This only makes sense if using handle_edge_irq() that will unconditionally call .irq_ack() to avoid a crash, but this driver is not ever using handle_edge_irq() so just avoid assigning .irq_ack(). A separate chip had to be created for the non-wakeup instance. Cc: Marc Zyngier <maz@kernel.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: omap: Drop irq_baseLinus Walleij
The OMAP1 at one point was using static irqs but that time is gone, OMAP1 uses sparse irqs like all other multiplatform targets so this static allocation of descriptors should just go. Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: max732x: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: mlxbf2: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: msc313: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. This conversion follows the pattern of the gpio-ixp4xx hierarchical GPIO interrupt driver. Cc: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: idt3243x: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Tested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: hlwd: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: hisi: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. The IRQ chip was unnamed which seems unwise, so we just assign the name "HISI-GPIO". Cc: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: cadence: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: ath79: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: aspeed-sgpio: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: aspeed: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Tested-by: Joel Stanley <joel@jms.id.au> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: aspeed: Always register the irqchipJoel Stanley
The driver was implemented in a way that made the irqchip optional, if a irq was not present in the device tree. However, all of the device trees have always had an irq, so the optional-ness has never been used. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: adnp: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-10gpio: altera: Convert to immutable irq_chipLinus Walleij
Convert the driver to immutable irq-chip with a bit of intuition. Cc: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-03-09gpio: loongson: fixup the warning about OF_GPIO direct dependenciesYinbo Zhu
WARNING: unmet direct dependencies detected for OF_GPIO Depends on [n]: GPIOLIB [=y] && OF [=n] && HAS_IOMEM [=y] Selected by [y]: - GPIO_LOONGSON_64BIT [=y] && GPIOLIB [=y] && HAS_IOMEM [=y] && (LOONGARCH || COMPILE_TEST [=y]) Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303091728.UUe6LWye-lkp@intel.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-11 06:17:39 +0000