summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-23dwc_eth_qos: fix interrupt enable raceRabin Vincent
We currently enable interrupts before we enable NAPI. If an RX interrupt hits before we enabled NAPI then the NAPI callback is never called and we leave the hardware with RX interrupts disabled, which of course leads us to never handling received packets. Fix this by moving the interrupt enable to after we've enable NAPI and the reclaim tasklet. Fixes: cd5e41234729 ("dwc_eth_qos: do phy_start before resetting hardware") Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: lpc_eth: Check clk_prepare_enable() errorFabio Estevam
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of failure While at it, replace __lpc_eth_clock_enable() with a plain clk_prepare_enable/clk_disable_unprepare() call in order to simplify the code. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23net: mv88e6xxx: Fix ingress rate removal for mv6131 chipsJamie Lentin
The PORT_RATE_CONTROL register works differently on 88e6095/6095f/6131 in comparison to 6123/61/65, and 0x0 disables. The distinction was lost Linux 4.1 --> 4.2 Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23phy: micrel: Reenable interrupts during resume for ksz9031Xander Huff
Like the ksz8081, the ksz9031 has the behavior where it will clear the interrupt enable bits when leaving power down. This takes advantage of the solution provided by f5aba91. Signed-off-by: Xander Huff <xander.huff@ni.com> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23tcp: properly scale window in tcp_v[46]_reqsk_send_ack()Eric Dumazet
When sending an ack in SYN_RECV state, we must scale the offered window if wscale option was negotiated and accepted. Tested: Following packetdrill test demonstrates the issue : 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 // Establish a connection. +0 < S 0:0(0) win 20000 <mss 1000,sackOK,wscale 7, nop, TS val 100 ecr 0> +0 > S. 0:0(0) ack 1 win 28960 <mss 1460,sackOK, TS val 100 ecr 100, nop, wscale 7> +0 < . 1:11(10) ack 1 win 156 <nop,nop,TS val 99 ecr 100> // check that window is properly scaled ! +0 > . 1:1(0) ack 1 win 226 <nop,nop,TS val 200 ecr 100> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23gianfar: fix size of scatter-gathered framesZefir Kurtisi
The current scatter-gather logic in gianfar is flawed, since it does not consider the eTSEC's RxBD 'Data Length' field is context depening: for the last fragment it contains the full frame size, while fragments contain the fragment size, which equals the value written to register MRBLR. This causes data corruption as soon as the hardware starts to fragment receiving frames. As a result, the size of fragmented frames is increased by (nr_frags - 1) * MRBLR We first noticed this issue working with DSA, where an ICMP request sized 1472 bytes causes the scatter-gather logic to kick in. The full Ethernet frame (1518) gets increased by DSA (4), GMAC_FCB_LEN (8), and FSL_GIANFAR_DEV_HAS_TIMER (priv->padding=8) to a total of 1538 octets, which is fragmented by the hardware and reconstructed by the driver to a 3074 octet frame. This patch fixes the problem by adjusting the size of the last fragment. It was tested by setting MRBLR to different multiples of 64, proving correct scatter-gather operation on frames with up to 9000 octets in size. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23gianfar: prevent fragmentation in DSA environmentsZefir Kurtisi
The eTSEC register MRBLR defines the maximum space in the RX buffers and is set to 1536 by gianfar. This reasonably covers the common use case where the MTU is kept at default 1500. In that case, the largest Ethernet frame size of 1518 plus an optional GMAC_FCB_LEN of 8, and an additional padding of 8 to handle FSL_GIANFAR_DEV_HAS_TIMER totals to 1534 and nicely fit within the chosen MRBLR. Alas, if the eTSEC is attached to a DSA enabled switch, the (E)DSA header extension (4 or 8 bytes) causes every maximum sized frame to be fragmented by the hardware. This patch increases the maximum RX buffer size by 8 and rounds up to the next multiple of 64, which the hardware's defines as RX buffer granularity. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23udp: fix poll() issue with zero sized packetsEric Dumazet
Laura tracked poll() [and friends] regression caused by commit e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") udp_poll() needs to know if there is a valid packet in receive queue, even if its payload length is 0. Change first_packet_length() to return an signed int, and use -1 as the indication of an empty queue. Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-23Merge tag 'iio-fixes-for-4.8a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-linus Jonathan writes: First round of IIO fixes for the 4.8 cycle. This is somewhat of a bumper set due to my unavailabilty earlier in the month. The only slightly unusual ones are the dts updates for the rockchip adc reset. The fix in the driver only makes sense with these and the rockchip maintainer is happy with them going through IIO to reach mainline. Core stuff * Fix an issue with a blocking op when !TASK_RUNNING. This been there a while and snuck in with seemingly minor additions to some core code paths. * Tools - generic_buffer failed to initialize the channel array pointer thus in the case of no channels blows up trying to free a random memory address. * sw-trigger: - Fix config group initialization when configfs is built as a module. Drivers * ad5933 - Fix an incorrect overwrite of an error value. * ad799x - A missed assignment of the update_scan_mode callback means buffered mode doesn't work on the ad7991, ad7995 or ad7999. * ads1015 - wrong pointer returned from i2c_get_clientdata (missmatch of assumptions) * am2315 - Timestamps are reported, but never actually acquired from anywhere (so always 0) - missing buffer selects in Kconfig * am335x adc - Protect fifo1 from concurrent access. - Increase timeout waiting for ADC to be long enough in all cases. * as3935 - Timestamps are reported, but never actually acquired from anywhere (so always 0) * at91 - Fix reading of channel 3. * atlas-ph-sensor - Typo means that the scale of electrical conductivity readings is way off. * bma220 - Timestamps are reported, but never actually acquired from anywhere (so always 0) - Missing buffer selects in Kconfig * bmp280 - pass the write pointer to PTR_ERR (i.e. the one that was just checked with IS_ERR). - suspend /resume crash due to wrong assumption about what dev_get_drvdata would return. * hdc100x - It superficially appeared that smbus_read_byte commands would allow reading of the outputs in two goes. In reality it doesn't work, but instead returns the same for the upper and lower bytes (nice catch from Alison!) * kxsd9 - Fix raw read return value to ensure it actually reports the value rather than a blank string. * max44000 - Missing buffer selects in Kconfig * rockchip_saradc - Add use of reset controller to enforce a clean state of the ADC. Some bootloaders can leave it in an 'intersting' state and effectively frozen without this. A couple of associated dts updates. * stk8ba50 - Missing buffer selects in Kconfig * stx104 - Fix a possible race due to use of devm_iio_device_register when there was other stuff in the remove function.
2016-08-23x86/PCI: VMD: Fix infinite loop executing irq'sKeith Busch
We can't initialize the list head on deletion as this causes the node to point to itself, which causes an infinite loop if vmd_irq() happens to be servicing that node. The list initialization was trying to fix a bug from multiple calls to disable the same IRQ. Fix this instead by having the VMD driver track if the interrupt is enabled. [bhelgaas: changelog, add "Fixes"] Fixes: 97e923063575 ("x86/PCI: VMD: Initialize list item in IRQ disable") Reported-by: Grzegorz Koczot <grzegorz.koczot@intel.com> Tested-by: Miroslaw Drost <miroslaw.drost@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by Jon Derrick: <jonathan.derrick@intel.com>
2016-08-23um: Don't discard .text.exit sectionAndrey Ryabinin
Commit e41f501d3912 ("vmlinux.lds: account for destructor sections") added '.text.exit' to EXIT_TEXT which is discarded at link time by default. This breaks compilation of UML: `.text.exit' referenced in section `.fini_array' of /usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o): defined in discarded section `.text.exit' of /usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o) Apparently UML doesn't want to discard exit text, so let's place all EXIT_TEXT sections in .exit.text. Fixes: e41f501d3912 ("vmlinux.lds: account for destructor sections") Reported-by: Stefan Traby <stefan@hello-penguin.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: <stable@vger.kernel.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-08-23ubifs: Fix xattr generic handler usageRichard Weinberger
UBIFS uses full names to work with xattrs, therefore we have to use xattr_full_name() to obtain the xattr prefix as string. Cc: <stable@vger.kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Fixes: 2b88fc21ca ("ubifs: Switch to generic xattr handlers") Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> Tested-by: Dongsheng Yang <dongsheng081251@gmail.com>
2016-08-23ubifs: Fix assertion in layout_in_gaps()Vincent Stehlé
An assertion in layout_in_gaps() verifies that the gap_lebs pointer is below the maximum bound. When computing this maximum bound the idx_lebs count is multiplied by sizeof(int), while C pointers arithmetic does take into account the size of the pointed elements implicitly already. Remove the multiplication to fix the assertion. Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system") Cc: <stable@vger.kernel.org> Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-08-23USB: avoid left shift by -1Alan Stern
UBSAN complains about a left shift by -1 in proc_do_submiturb(). This can occur when an URB is submitted for a bulk or control endpoint on a high-speed device, since the code doesn't bother to check the endpoint type; normally only interrupt or isochronous endpoints have a nonzero bInterval value. Aside from the fact that the operation is illegal, it shouldn't matter because the result isn't used. Still, in theory it could cause a hardware exception or other problem, so we should work around it. This patch avoids doing the left shift unless the shift amount is >= 0. The same piece of code has another problem. When checking the device speed (the exponential encoding for interrupt endpoints is used only by high-speed or faster devices), we need to look for speed >= USB_SPEED_SUPER as well as speed == USB_SPEED HIGH. The patch adds this check. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Vittorio Zecca <zeccav@gmail.com> Tested-by: Vittorio Zecca <zeccav@gmail.com> Suggested-by: Bjørn Mork <bjorn@mork.no> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-23perf record: Fix spelling mistake "Finshed" -> "Finished"Colin Ian King
Trivial fix to spelling mistake in pr_debug message. Signed-off-by: Colin King <colin.king@canonical.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20160822183008.26368-1-colin.king@canonical.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf bpf: Fix typo: "ehough" -> "enough"Colin Ian King
Trivial typo fix in pr_debug message Signed-off-by: Colin King <colin.king@canonical.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: He Kuang <hekuang@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20160821141924.8056-1-colin.king@canonical.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf test bpf: Fix typo: "ehough" -> "enough"Colin Ian King
Trivial typo fix in pr_debug message Signed-off-by: Colin King <colin.king@canonical.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20160821141603.7832-1-colin.king@canonical.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf tools: Fix typo: "ehough" -> "enough"Colin Ian King
Trivial typo fix in pr_debug message Signed-off-by: Colin King <colin.king@canonical.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20160821141256.7530-1-colin.king@canonical.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23ftrace: kprobe: uprobe: Show u8/u16/u32/u64 types in decimalMasami Hiramatsu
Change kprobe/uprobe-tracer to show the arguments type-casted with u8/u16/u32/u64 in decimal digits instead of hexadecimal. To minimize compatibility issue, the arguments without type casting are typed by x64 (or x32 for 32bit arch) by default. Note: all arguments set by old perf probe without types are shown in decimal by default. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Naohiro Aota <naohiro.aota@hgst.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/147151076135.12957.14684546093034343894.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf probe: Use hexadecimal type by default if possibleMasami Hiramatsu
Use hexadecimal type by default if it is available on current running kernel. This keeps the default behavior of perf probe after changing the output format of 'u8/16/32/64' to unsigned decimal number. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Naohiro Aota <naohiro.aota@hgst.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/147151074685.12957.16415861010796255514.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf probe: Support hexadecimal castingMasami Hiramatsu
Support hexadecimal unsigned integer casting by 'x'. This allows user to explicitly specify the output format of the probe arguments as hexadecimal. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Naohiro Aota <naohiro.aota@hgst.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/147151072679.12957.4458656416765710753.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf probe: Add supported for type casting by the running kernelMasami Hiramatsu
Add a checking routine what types are supported by the running kernel by finding the pattern in <debugfs>/tracing/README. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Naohiro Aota <naohiro.aota@hgst.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/147151071172.12957.3340095690753291085.stgit@devbox [ 'enum probe_type' has no negative entries, so ends up as 'unsigned', remove '< 0' test to fix the build on at least centos:5, debian:7 & ubuntu:12.04.5 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23ftrace: probe: Add README entries for k/uprobe-eventsMasami Hiramatsu
Add README entries for kprobe-events and uprobe-events. This allows user to check what options can be acceptable for running kernel. E.g. perf tools can choose correct types for the kernel. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Naohiro Aota <naohiro.aota@hgst.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/147151069524.12957.12957179170304055028.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23ftrace: kprobe: uprobe: Add x8/x16/x32/x64 for hexadecimal typesMasami Hiramatsu
Add x8/x16/x32/x64 for hexadecimal type casting to kprobe/uprobe event tracer. These type casts can be used for integer arguments for explicitly showing them in hexadecimal digits in formatted text. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Naohiro Aota <naohiro.aota@hgst.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/147151067029.12957.11591314629326414783.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf hists browser: Remove superfluous null check on mapColin Ian King
'map' is being already checked if it is NULL at the start of do_zoom_dso(), so the second subsequent check is superfluous and can be removed. Signed-off-by: Colin King <colin.king@canonical.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1471278343-14999-1-git-send-email-colin.king@canonical.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf tools: Skip running the feature tests for 'make install-doc'Rui Teng
It is a requirement from the perf TODO list[1]: ''The feature tests should be performed only when a file that needs those tests, or at least only when some .c or .h file will be rebuilt. An initial step would be for 'make install-doc' not to run the feature tests, there it is not needed at all.'' By adding 'install-doc' to the NON_CONFIG_TARGETS, it will skip running the feature tests for such target. The Auto-detecting system features list will not be displayed: $ make install-doc BUILD: Doing 'make -j2' parallel build SUBDIR Documentation make[2]: Nothing to be done for 'install'. [1] https://perf.wiki.kernel.org/index.php/Todo Signed-off-by: Rui Teng <rui.teng@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1470818948-17784-1-git-send-email-rui.teng@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf tools: Use __weak definition from linux/compiler.hRui Teng
Replace __attribute__((weak)) with __weak definition Signed-off-by: Rui Teng <rui.teng@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1469671557-2256-2-git-send-email-rui.teng@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf report: Allow configuring the default sort order in ~/.perfconfigArnaldo Carvalho de Melo
Allows changing the default sort order from "comm,dso,symbol" to some other default, for instance "sym,dso" may be more fitting for kernel developers. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-pm1h5puxua8nsxksd68fjm8r@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23tools: Copy coresight-pmu.h header file needed by perf toolsMathieu Poirier
Directly accessing kernel files is not allowed anymore. As such making file coresight-pmu.h accessible by the perf tools and complain if this copy strays from the one found in the main kernel tree. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vince Weaver <vince@deater.net> Link: http://lkml.kernel.org/r/1470932464-726-2-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf disassemble: Extract logic to find file to pass to objdump to a ↵Arnaldo Carvalho de Melo
separate function Disentangling this a bit further, more to come. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-7bjv2xazuyzs0xw01mlwosn5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf disassemble: Simplify logic for picking the filename to disassembleArnaldo Carvalho de Melo
Lots of changes to support kcore, compressed modules, build-id files left us with some spaguetti code, simplify it a bit, more to come. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-h70p7x451li3f2fhs44vzmm8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf disassemble: Move check for kallsyms + !kcoreArnaldo Carvalho de Melo
We don't need to do all that filename logic to then just have to test something unrelated and bail out, move it to the start of the function. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-lk1v4srtsktonnyp6t1o0uhx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf hists: Add support for header spanJiri Olsa
Add span argument for header callback function. The handling of this argument is completely in the hands of the callback. The only thing the caller ensures is it's zeroed on the beginning. Omitting span skipping in hierarchy headers and gtk code. The c2c code use this to span header lines based on the entries span configuration. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1470583710-1649-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf tools stdio: Display multiple header linesJiri Olsa
Display multiple header lines in stdio output , if it's configured within struct perf_hpp_list::nr_header_lines. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1470583710-1649-5-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf tools tui: Display multiple header linesJiri Olsa
Display multiple header lines in TUI browser, if it's configured within struct perf_hpp_list::nr_header_lines. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1470583710-1649-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf hists: Add line argument into perf_hpp_fmt's header callbackJiri Olsa
Adding line argument into perf_hpp_fmt's header callback to be able to request specific header line. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1470583710-1649-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf hists: Introduce nr_header_lines into struct perf_hpp_listJiri Olsa
Currently we support just single line headers, this is first step to allow more. Store the number of header lines in perf_hpp_list, which encompasses all the display/sort entries and is thus suitable to hold this value. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1470583710-1649-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf top: Use MSEC_PER_SECArnaldo Carvalho de Melo
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-iof4j6mutyogdeie1sj98dhv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf bench futex: Use NSEC_PER_USECArnaldo Carvalho de Melo
Following kernel practices and better documentin Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-xncwqxegjp13g2nxih3lp9mx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf kvm: Use NSEC_PER_USECArnaldo Carvalho de Melo
Following kernel practices and better documenting units of time. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-5x6p6fmzrogonpbnkkkw4usk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf record: Use USEC_PER_MSECArnaldo Carvalho de Melo
Instead of a naked 1000. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-7v6be7jhvstbkvk3rsytjw0o@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf bench sched-messaging: Use USEC_PER_MSECArnaldo Carvalho de Melo
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-xhyoyxejvorrgmwjx9k3j8k2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf bench mem: Use USEC_PER_SECArnaldo Carvalho de Melo
Following kernel practices, using linux/time64.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-xdtmguafva17wp023sxojiib@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf stat: Use *SEC_PER_*SEC macrosArnaldo Carvalho de Melo
To match how this is done in the kernel. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-gym6yshewpdegt153u8v2q5r@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf bench sched-pipe: Use linux/time64.h, USEC_PER_SECArnaldo Carvalho de Melo
Following kernel practices. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-wgfu1h1pnw8lc919o2tan58y@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf timechart: Use NSEC_PER_U?SECArnaldo Carvalho de Melo
Following kernel practices, using linux/time64.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stanislav Fomichev <stfomichev@yandex-team.ru> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-5l1md8lsdhfnrlsqyejzo9w2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf sched: Use linux/time64.hArnaldo Carvalho de Melo
Probably the next step is to introduce linux/time.h and use timespec_to_ns(), etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-4nqhskn27fn93cz3ukbc8drf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23perf bench numa: Use NSEC_PER_U?SECArnaldo Carvalho de Melo
Following kernel practices, using linux/time64.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-7vnv15263y50qku76p4w5xk6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23tools: Introduce tools/include/linux/time64.h for *SEC_PER_*SEC macrosArnaldo Carvalho de Melo
And remove it from tools/perf/{perf,util}.h, making code that needs these macros to include linux/time64.h instead, to match how this is used in the kernel sources. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-e69fc1pvkgt57yvxqt6eunyg@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23Merge branch 'perf/urgent' into perf/core, to pick up fixes before merging ↵Arnaldo Carvalho de Melo
new changes Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-13 16:41:33 +0000