summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-09ktest: Add timeout for ssh sync testingSteven Rostedt (VMware)
Before rebooting the box, a "ssh sync" is called to the test machine to see if it is alive or not. But if the test machine is in a partial state, that ssh may never actually finish, and the ktest test hangs. Add a 10 second timeout to the sync test, which will fail after 10 seconds and then cause the test to reboot the test machine. Cc: stable@vger.kernel.org Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-03-09ktest: Make default build option oldconfig not randconfigSteven Rostedt (VMware)
For the last time, I screwed up my ktest config file, and the build went into the default "randconfig", blowing away the .config that I had set up. The reason for the default randconfig was because when this was first written, I wanted to do a bunch of randconfigs. But as time progressed, ktest isn't about randconfig anymore, and because randconfig destroys the config in the build directory, it's a dangerous default to have. Use oldconfig as the default. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-03-09ktest: Fix some typos in sample.confMasanari Iida
This patch fixes some spelling typo in sample.conf Link: http://lkml.kernel.org/r/20190930124925.20250-1-standby24x7@gmail.com Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-03-09drm/amd/display: update soc bb for nv14Martin Leung
[why] nv14 previously inherited soc bb from generic dcn 2, did not match watermark values according to memory team [how] add nv14 specific soc bb: copy nv2 generic that it was using from before, but changed num channels to 8 Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-09linux-next: DOC: RDS: Fix a typo in rds.txtMasanari Iida
This patch fix a spelling typo in rds.txt Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09pinctrl: qcom: Assign irq_eoi conditionallyLinus Walleij
The hierarchical parts of MSM pinctrl/GPIO is only used when the device tree has a "wakeup-parent" as a phandle, but the .irq_eoi is anyway assigned leading to semantic problems on elder Qualcomm chipsets. When the drivers/mfd/qcom-pm8xxx.c driver calls chained_irq_exit() that call will in turn call chip->irq_eoi() which is set to irq_chip_eoi_parent() by default on a hierachical IRQ chip, and the parent is pinctrl-msm.c so that will in turn unconditionally call irq_chip_eoi_parent() again, but its parent is invalid so we get the following crash: Unnable to handle kernel NULL pointer dereference at virtual address 00000010 pgd = (ptrval) [00000010] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM (...) PC is at irq_chip_eoi_parent+0x4/0x10 LR is at pm8xxx_irq_handler+0x1b4/0x2d8 If we solve this crash by avoiding to call up to irq_chip_eoi_parent(), the machine will hang and get reset by the watchdog, because of semantic issues, probably inside irq_chip. As a solution, just assign the .irq_eoi conditionally if we are actually using a wakeup parent. Cc: David Heidelberg <david@ixit.cz> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Lina Iyer <ilina@codeaurora.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: stable@vger.kernel.org Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy") Link: https://lore.kernel.org/r/20200306121221.1231296-1-linus.walleij@linaro.org Link: https://lore.kernel.org/r/20200309125207.571840-1-linus.walleij@linaro.org Link: https://lore.kernel.org/r/20200309152604.585112-1-linus.walleij@linaro.org Tested-by: David Heidelberg <david@ixit.cz> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-09pinctrl: falcon: fix syntax errorMathias Kresin
Add the missing semicolon after of_node_put to get the file compiled. Fixes: f17d2f54d36d ("pinctrl: falcon: Add of_node_put() before return") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Mathias Kresin <dev@kresin.me> Link: https://lore.kernel.org/r/20200305182245.9636-1-dev@kresin.me Acked-by: Thomas Langer <thomas.langer@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-09pinctrl: qcom: ssbi-gpio: Fix fwspec parsing bugLinus Walleij
We are parsing SSBI gpios as fourcell fwspecs but they are twocell. Probably a simple copy-and-paste bug. Tested on the APQ8060 DragonBoard and after this ethernet and MMC card detection works again. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable@vger.kernel.org Reviewed-by: Brian Masney <masneyb@onstation.org> Fixes: ae436fe81053 ("pinctrl: ssbi-gpio: convert to hierarchical IRQ helpers in gpio core") Link: https://lore.kernel.org/r/20200306143416.1476250-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-09MAINTAINERS: Correct MIPS patchwork URLThomas Bogendoerfer
MIPS patchwork lives on patchwork.kernel.org for quite some time. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-09ALSA: line6: Fix endless MIDI read loopTakashi Iwai
The MIDI input event parser of the LINE6 driver may enter into an endless loop when the unexpected data sequence is given, as it tries to continue the secondary bytes without termination. Also, when the input data is too short, the parser returns a negative error, while the caller doesn't handle it properly. This would lead to the unexpected behavior as well. This patch addresses those issues by checking the return value correctly and handling the one-byte event in the parser properly. The bug was reported by syzkaller. Reported-by: syzbot+cce32521ee0a824c21f7@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/000000000000033087059f8f8fa3@google.com Link: https://lore.kernel.org/r/20200309095922.30269-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-03-09ALSA: pcm: oss: Avoid plugin buffer overflowTakashi Iwai
Each OSS PCM plugins allocate its internal buffer per pre-calculation of the max buffer size through the chain of plugins (calling src_frames and dst_frames callbacks). This works for most plugins, but the rate plugin might behave incorrectly. The calculation in the rate plugin involves with the fractional position, i.e. it may vary depending on the input position. Since the buffer size pre-calculation is always done with the offset zero, it may return a shorter size than it might be; this may result in the out-of-bound access as spotted by fuzzer. This patch addresses those possible buffer overflow accesses by simply setting the upper limit per the given buffer size for each plugin before src_frames() and after dst_frames() calls. Reported-by: syzbot+e1fe9f44fb8ecf4fb5dd@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/000000000000b25ea005a02bcf21@google.com Link: https://lore.kernel.org/r/20200309082148.19855-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-03-08inet_diag: return classid for all socket typesDmitry Yakunin
In commit 1ec17dbd90f8 ("inet_diag: fix reporting cgroup classid and fallback to priority") croup classid reporting was fixed. But this works only for TCP sockets because for other socket types icsk parameter can be NULL and classid code path is skipped. This change moves classid handling to inet_diag_msg_attrs_fill() function. Also inet_diag_msg_attrs_size() helper was added and addends in nlmsg_new() were reordered to save order from inet_sk_diag_fill(). Fixes: 1ec17dbd90f8 ("inet_diag: fix reporting cgroup classid and fallback to priority") Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08net: stmmac: dwmac1000: Disable ACS if enhanced descs are not usedRemi Pommarel
ACS (auto PAD/FCS stripping) removes FCS off 802.3 packets (LLC) so that there is no need to manually strip it for such packets. The enhanced DMA descriptors allow to flag LLC packets so that the receiving callback can use that to strip FCS manually or not. On the other hand, normal descriptors do not support that. Thus in order to not truncate LLC packet ACS should be disabled when using normal DMA descriptors. Fixes: 47dd7a540b8a0 ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08gre: fix uninit-value in __iptunnel_pull_headerEric Dumazet
syzbot found an interesting case of the kernel reading an uninit-value [1] Problem is in the handling of ETH_P_WCCP in gre_parse_header() We look at the byte following GRE options to eventually decide if the options are four bytes longer. Use skb_header_pointer() to not pull bytes if we found that no more bytes were needed. All callers of gre_parse_header() are properly using pskb_may_pull() anyway before proceeding to next header. [1] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2303 [inline] BUG: KMSAN: uninit-value in __iptunnel_pull_header+0x30c/0xbd0 net/ipv4/ip_tunnel_core.c:94 CPU: 1 PID: 11784 Comm: syz-executor940 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 pskb_may_pull include/linux/skbuff.h:2303 [inline] __iptunnel_pull_header+0x30c/0xbd0 net/ipv4/ip_tunnel_core.c:94 iptunnel_pull_header include/net/ip_tunnels.h:411 [inline] gre_rcv+0x15e/0x19c0 net/ipv6/ip6_gre.c:606 ip6_protocol_deliver_rcu+0x181b/0x22c0 net/ipv6/ip6_input.c:432 ip6_input_finish net/ipv6/ip6_input.c:473 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ip6_input net/ipv6/ip6_input.c:482 [inline] ip6_mc_input+0xdf2/0x1460 net/ipv6/ip6_input.c:576 dst_input include/net/dst.h:442 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ipv6_rcv+0x683/0x710 net/ipv6/ip6_input.c:306 __netif_receive_skb_one_core net/core/dev.c:5198 [inline] __netif_receive_skb net/core/dev.c:5312 [inline] netif_receive_skb_internal net/core/dev.c:5402 [inline] netif_receive_skb+0x66b/0xf20 net/core/dev.c:5461 tun_rx_batched include/linux/skbuff.h:4321 [inline] tun_get_user+0x6aef/0x6f60 drivers/net/tun.c:1997 tun_chr_write_iter+0x1f2/0x360 drivers/net/tun.c:2026 call_write_iter include/linux/fs.h:1901 [inline] new_sync_write fs/read_write.c:483 [inline] __vfs_write+0xa5a/0xca0 fs/read_write.c:496 vfs_write+0x44a/0x8f0 fs/read_write.c:558 ksys_write+0x267/0x450 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __ia32_sys_write+0xdb/0x120 fs/read_write.c:620 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f62d99 Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 002b:00000000fffedb2c EFLAGS: 00000217 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000020002580 RDX: 0000000000000fca RSI: 0000000000000036 RDI: 0000000000000004 RBP: 0000000000008914 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2793 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1051 [inline] alloc_skb_with_frags+0x18c/0xa70 net/core/skbuff.c:5766 sock_alloc_send_pskb+0xada/0xc60 net/core/sock.c:2242 tun_alloc_skb drivers/net/tun.c:1529 [inline] tun_get_user+0x10ae/0x6f60 drivers/net/tun.c:1843 tun_chr_write_iter+0x1f2/0x360 drivers/net/tun.c:2026 call_write_iter include/linux/fs.h:1901 [inline] new_sync_write fs/read_write.c:483 [inline] __vfs_write+0xa5a/0xca0 fs/read_write.c:496 vfs_write+0x44a/0x8f0 fs/read_write.c:558 ksys_write+0x267/0x450 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __ia32_sys_write+0xdb/0x120 fs/read_write.c:620 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 Fixes: 95f5c64c3c13 ("gre: Move utility functions to common headers") Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08ipvlan: do not add hardware address of master to its unicast filter listJiri Wiesner
There is a problem when ipvlan slaves are created on a master device that is a vmxnet3 device (ipvlan in VMware guests). The vmxnet3 driver does not support unicast address filtering. When an ipvlan device is brought up in ipvlan_open(), the ipvlan driver calls dev_uc_add() to add the hardware address of the vmxnet3 master device to the unicast address list of the master device, phy_dev->uc. This inevitably leads to the vmxnet3 master device being forced into promiscuous mode by __dev_set_rx_mode(). Promiscuous mode is switched on the master despite the fact that there is still only one hardware address that the master device should use for filtering in order for the ipvlan device to be able to receive packets. The comment above struct net_device describes the uc_promisc member as a "counter, that indicates, that promiscuous mode has been enabled due to the need to listen to additional unicast addresses in a device that does not implement ndo_set_rx_mode()". Moreover, the design of ipvlan guarantees that only the hardware address of a master device, phy_dev->dev_addr, will be used to transmit and receive all packets from its ipvlan slaves. Thus, the unicast address list of the master device should not be modified by ipvlan_open() and ipvlan_stop() in order to make ipvlan a workable option on masters that do not support unicast address filtering. Fixes: 2ad7bf3638411 ("ipvlan: Initial check-in of the IPVLAN driver") Reported-by: Per Sundstrom <per.sundstrom@redqube.se> Signed-off-by: Jiri Wiesner <jwiesner@suse.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-08io_uring: ensure RCU callback ordering with rcu_barrier()Jens Axboe
After more careful studying, Paul informs me that we cannot rely on ordering of RCU callbacks in the way that the the tagged commit did. The current construct looks like this: void C(struct rcu_head *rhp) { do_something(rhp); call_rcu(&p->rh, B); } call_rcu(&p->rh, A); call_rcu(&p->rh, C); and we're relying on ordering between A and B, which isn't guaranteed. Make this explicit instead, and have a work item issue the rcu_barrier() to ensure that A has run before we manually execute B. While thorough testing never showed this issue, it's dependent on the per-cpu load in terms of RCU callbacks. The updated method simplifies the code as well, and eliminates the need to maintain an rcu_head in the fileset data. Fixes: c1e2148f8ecb ("io_uring: free fixed_file_data after RCU grace period") Reported-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-08Linux 5.6-rc5v5.6-rc5Linus Torvalds
2020-03-08Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "We've been accruing these for a couple of weeks, so the batch is a bit bigger than usual. Largest delta is due to a led-bl driver that is added -- there was a miscommunication before the merge window and the driver didn't make it in. Due to this, the platforms needing it regressed. At this point, it seemed easier to add the new driver than unwind the changes. Besides that, there are a handful of various fixes: - AMD tee memory leak fix - A handful of fixlets for i.MX SCU communication - A few maintainers woke up and realized DEBUG_FS had been missing for a while, so a few updates of that. ... and the usual collection of smaller fixes to various platforms" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (37 commits) ARM: socfpga_defconfig: Add back DEBUG_FS arm64: dts: socfpga: agilex: Fix gmac compatible ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS arm64: dts: meson: fix gxm-khadas-vim2 wifi arm64: dts: meson-sm1-sei610: add missing interrupt-names ARM: meson: Drop unneeded select of COMMON_CLK ARM: dts: bcm2711: Add pcie0 alias ARM: dts: bcm283x: Add missing properties to the PWR LED tee: amdtee: fix memory leak in amdtee_open_session() ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set arm: dts: dra76x: Fix mmc3 max-frequency ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes bus: ti-sysc: Fix 1-wire reset quirk ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value soc: imx-scu: Align imx sc msg structs to 4 firmware: imx: Align imx_sc_msg_req_cpu_start to 4 firmware: imx: scu-pd: Align imx sc msg structs to 4 firmware: imx: misc: Align imx sc msg structs to 4 firmware: imx: scu: Ensure sequential TX ARM: dts: imx7-colibri: Fix frequency for sd/mmc ...
2020-03-08Merge tag 'edac_urgent-2020-03-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: "Error reporting fix for synopsys_edac: do not overwrite partial decoded error message (Sherry Sun)" * tag 'edac_urgent-2020-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/synopsys: Do not print an error with back-to-back snprintf() calls
2020-03-08iio: dac: Kconfig: sort symbols alphabeticallyAlexandru Ardelean
While adding a new device, I noticed these aren't sorted alphabetically [as in the Makefile], which messed my head-up. This change sorts the devices alphabetically in the drivers/iio/dac/Kconfig file as well. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: light: gp2ap020a00f: fix iio_triggered_buffer_{predisable,postenable} ↵Alexandru Ardelean
positions The iio_triggered_buffer_{predisable,postenable} functions attach/detach the poll functions. For the predisable hook, the disable code should occur before detaching the poll func, and for the postenable hook, the poll func should be attached before the enable code. This change moves the postenable/predisable hooks into the correct positions. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: potentiostat: lmp9100: fix iio_triggered_buffer_{predisable,postenable} ↵Alexandru Ardelean
positions The iio_triggered_buffer_{predisable,postenable} functions attach/detach the poll functions. For the predisable hook, the disable code should occur before detaching the poll func, and for the postenable hook, the poll func should be attached before the enable code. The lmp9100 was attaching a poll function but never detaching it via any IIO disable hook. This change adds the detaching of the poll function, and moves/renames lmp91000_buffer_preenable() function to lmp91000_buffer_postenable(). The idea is to make it more symmetrical, so that when the iio_triggered_buffer_{predisable,postenable} functions get removed, it's easier to see. Fixes: 67e17300dc1d7 ("iio: potentiostat: add LMP91000 support") Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: trigger: stm32-timer: add power management supportFabrice Gasnier
Add suspend/resume PM sleep ops to stm32-timer-trigger driver. Register contents may be lost depending on low power modes. When going to low power, enforce the timer isn't active. Gracefully restore its state upon resume in case it's been left enabled prior to suspend. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: trigger: stm32-timer: rename enabled flagFabrice Gasnier
"clk_enabled" flag reflects enabled state of the timer, for master mode, slave mode or trigger (with sampling_frequency). So rename it to "enabled". Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: add a TODORohit Sarkar
This patch adds a TODO file with some work items added with reference to the conversation in [1]. A TODO file is immensely useful while onboarding new contributors who are looking for some low hanging fruit to get their foot into the door. Since these items affect all drivers the file has been placed in the root iio directory instead of augmenting the staging TODO. Thanks, Rohit [1]: https://marc.info/?l=linux-iio&m=158256721009892&w=2 Signed-off-by: Rohit Sarkar <rohitsarkar5398@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08counter: 104-quad-8: Support Differential Encoder Cable StatusWilliam Breathitt Gray
The ACCES 104-QUAD-8 series provides status information about the connection state of the differential encoder cable inputs. This patch implements support to expose such information from these devices. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08counter: 104-quad-8: Support Filter Clock PrescalerWilliam Breathitt Gray
The ACCES 104-QUAD-8 series does active filtering on the quadrature input signals via the PC/104 bus clock (OSC 14.318 MHz). This patch exposes the filter clock prescaler available on each channel. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: pressure: icp10100: add driver for InvenSense ICP-101xxJean-Baptiste Maneyrol
InvenSense ICP-101xx sensors are a family of barometric pressure and temperature sensor. These devices are I2C only and use a specific protocol of commands/responses. Data transfer is secured by using crc8. Driver provides processed pressure and raw temperature data. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: industrialio-core: Fix debugfs readAlexandru Tachici
Currently iio_debugfs_read_reg calls debugfs_reg_access every time it is ran. Reading the same hardware register multiple times during the same reading of a debugfs file can cause unintended effects. For example for each: cat iio:device0/direct_reg_access the file_operations.read function will be called at least twice. First will return the full length of the string in bytes and the second will return 0. This patch makes iio_debugfs_read_reg to call debugfs_reg_access only when the user's buffer position (*ppos) is 0. (meaning it is the beginning of a new reading of the debugfs file). Fixes: e553f182d55b ("staging: iio: core: Introduce debugfs support, add support for direct register access") Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: adis: add a note better explaining state_lockAlexandru Ardelean
The 'state_lock' mutex was renamed from 'txrx_lock' in a previous patch and is intended to be used by ADIS drivers to protect the state of devices during consecutive R/W ops. The initial patch that introduced this change did not do a good [well, any] job at explaining this. This patch adds a comment to the 'state_lock' better explaining it's use. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: adis: update 'adis_data' struct doc-stringAlexandru Ardelean
The doc-string has been neglected over time. This change updates it with all the missing info. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: adis: add doc-string for 'adis' structAlexandru Ardelean
This change adds a doc-string for the 'adis' struct. It details the fields and their roles. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: adis_buffer: Use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: adc: ti-tlc4541: Use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: adc: mcp320x: Use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: adc: max1118: Use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: adc: ad9292: Use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: adc: exynos: Silence warning about regulators during deferred probeMarek Szyprowski
Don't confuse user with meaningless warning about the failure in getting regulators in case of deferred probe. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08staging: iio: update TODORohit Sarkar
Since there are no uses of the old GPIO API, remove the item from the TODO. Signed-off-by: Rohit Sarkar <rohitsarkar5398@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: amplifiers: ad8366: add support for HMC1119 AttenuatorSergiu Cuciurean
This change adds support for the HMC1119 Silicon Digial Attenuator. The HMC1119 is a broadband, highly accurate, 7-bit digital attenuator, operating from 0.1 GHz to 6.0 GHz with 31.5 dB attenuation control range in 0.25 dB steps. Link: https://www.analog.com/media/en/technical-documentation/data-sheets/hmc1119.pdf Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: si1133: read 24-bit signed integer for measurementMaxime Roussin-Bélanger
The chip is configured in 24 bit mode. The values read from it must always be treated as is. This fixes the issue by replacing the previous 16 bits value by a 24 bits buffer. This changes affects the value output by previous version of the driver, since the least significant byte was missing. The upper half of 16 bit values previously output are now the upper half of a 24 bit value. Fixes: e01e7eaf37d8 ("iio: light: introduce si1133") Reported-by: Simon Goyette <simon.goyette@gmail.com> Co-authored-by: Guillaume Champagne <champagne.guillaume.c@gmail.com> Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com> Signed-off-by: Guillaume Champagne <champagne.guillaume.c@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08dt-bindings: iio: dac: Add docs for AD5770R DACAlexandru Tachici
Adding dt-bindings documentation for AD5770R DAC. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: dac: ad5770r: Add AD5770R supportAlexandru Tachici
The AD5770R is a 6-channel, 14-bit resolution, low noise, programmable current output digital-to-analog converter (DAC) for photonics control applications. It contains five 14-bit resolution current sourcing DAC channels and one 14-bit resolution current sourcing/sinking DAC channel. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: light: Simplify the current to lux LUTGregor Riepl
The look-up-table for currens to lux is simply specifying all currents from 5..47 mA, if we add some values for 0..5 we can just select the index for the lux value in an array from the mA value. Use clamp() to get the value in the range of values in the array. Cc: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Gregor Riepl <onitake@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08dt-bindings: iio: adc: ad7923: Add binding documentation for AD7928Daniel Junho
This patch add device tree binding documentation for AD7923 adc in YAML format. Signed-off-by: Daniel Junho <djunho@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08dt-bindings: iio: chemical: consolidate atlas-sensor docsMatt Ranostay
Since Atlas Scientific device support only varies from the compatible string is ideal all the respective docs are merged into a single doc named atlas,sensor.yaml Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: chemical: atlas-sensor: add DO-SM module supportMatt Ranostay
Atlas Scientific DO-SM OEM sensor reads disolved oxygen in a solution. This is reported back as mg/L which maps directly to ppm and so the IIO_CONCENTRATION channel type can be used. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: chemical: atlas-sensor: allow probe without interrupt lineMatt Ranostay
Sensors don't actually need a interrupt line to give valid readings, and can triggered with CONFIG_IIO_HRTIMER_TRIGGER as well. Remove the required check for interrupt, and continue along in the probe function. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: inv_mpu6050: temperature only work with accel/gyroJean-Baptiste Maneyrol
Temperature sensor works correctly only when accel and/or gyro is turned on. Prevent polling value if they are not running. Anyway it doesn't make sense to use it without sensor engines on. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: imu: inv_mpu6050: use runtime pm with autosuspendJean-Baptiste Maneyrol
Use runtime power management for handling chip power and sensor engines on/off. Simplifies things a lot since pm runtime already has reference counter. Usage of autosuspend reduces the number of power on/off. This makes polling interface now usable to get data at low frequency. Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2025-09-23 12:59:46 +0000