summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-06-17fm10k: re-map all possible VF queues after a VFLRJacob Keller
During initialization, the VF counts its rings by walking the TQDLOC registers. This works only if the TQMAP/RQMAP registers are set to map all of the out-of-bound rings back to the first one. This allows the VF to cleanly detect when it has run out of queues. Update the PF code so that it resets the empty TQMAP/RQMAP registers post-VFLR to prevent innocent VF drivers from triggering malicious driver events. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-17fm10k: force LPORT delete when updating VLAN or MAC addressJacob Keller
Currently, we don't notify the switch at all when the PF administratively sets a new VLAN or MAC address. This causes the old addresses to remain valid on the switch table. Since the PF is overriding any configuration done directly by the VF, we choose to simply re-create the LPORT for the VF. This does mean that all rules for the VF will be dropped when we set something directly via the PF, but it prevents some weird issues where the MAC/VLAN table retains some stale configuration. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-17fm10k: use dma_set_mask_and_coherent in fm10k_probeJacob Keller
This patch cleans up the use of dma_get_required_mask and uses the simpler dma_set_mask_and_coherent function instead of doing these as separate steps. I removed the dma_get_required_mask call because based on some minimal testing it appears that either (a) we're not doing the right thing with the call or (b) we don't need it anyways. If the value returned is <48bits, we'll end up trying with 48 bits anyways. If it's over 48bits, fm10k can't support that anyways, and we should try 48bits. If 48bits fails, we'll fallback to 32bits. This cleans up some very funky code. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-17fm10k: trivial fixup message style to include a colonJacob Keller
Also use %d for error values, since printing in hexadecimal is probably not helpful. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-17fm10k: remove extraneous NULL check on l2_accelJacob Keller
l2_accel was checked for NULL at the top of fm10k_dfwd_del_station, and we return if it is not defined. Due to this, we already know it can't be null here so a separate check is meaningless. Discovered via cppcheck. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-17fm10k: use an unsigned int for i in ethtool_get_stringsJacob Keller
The value will never be negative, and we use the %u print format. Thus, use unsigned int for the loop counter. Issue found using cppcheck. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-17fm10k: add call to fm10k_clean_all_rx_rings in fm10k_downJacob Keller
This prevents a memory leak in fm10k_set_ringparams. The leak occurs because we go down, change ring parameters, and then come up. However, fm10k_down on its own is not clearing the Rx rings. Since fm10k_up assumes the rings are clean we basically drop the buffers and leak a bunch of memory. Eventually we hit dirty page faults and reboot the system. This issue does not occur elsewhere because other flows that involve fm10k_down go through fm10k_close which immediately called fm10k_free_all_rx_resources which properly cleans the rings. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-17fm10k: fix incorrect free on skb in ts_tx_enqueueJacob Keller
This patch resolves a bug in the ts_tx_enqueue code responsible for a NULL pointer dereference and invalid access of the skb list. We incorrectly freed the actual skb we found instead of our copy. Thus the skb queue is essentially invalidated. Resolve this by freeing our clone in the cases where we did not add it to the queue. This also avoids the skb memory leak caused by failure to free the clone. [ 589.719320] BUG: unable to handle kernel NULL pointer dereference at (null) [ 589.722344] IP: [<ffffffffa0310e60>] fm10k_ts_tx_subtask+0xb0/0x160 [fm10k] [ 589.723796] PGD 0 [ 589.725228] Oops: 0000 [#1] SMP Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-17fm10k: move setting shinfo inside ts_tx_enqueueJacob Keller
This patch simplifies the code flow for setting the IN_PROGRESS bit of the shinfo for an skb we will be timestamping. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-17fm10k: use correct ethernet driver Tx timestamp functionJacob Keller
skb_complete_tx_timestamp is intended for use by PHY drivers which implement a different method of returning timestamps. This method is intended to be used after a PHY driver accepts a cloned packet via its phy_driver.txtstamp function. It is not correct to use in the standard ethernet driver such as fm10k. This patch fixes the following possible kernel panic. [ 2744.552896] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W OE 3.19.3-200.fc21.x86_64 #1 [ 2744.552899] Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.03.8x23.060520140825 06/05/2014 [ 2744.552901] 0000000000000000 2f4c8b10ea3f9848 ffff88081ee03a38 ffffffff8176e215 [ 2744.552906] 0000000000000000 0000000000000000 ffff88081ee03a78 ffffffff8109bc1a [ 2744.552910] ffff88081ee03c50 ffff88080e55fc00 ffff88080e55fc00 ffffffff81647c50 [ 2744.552914] Call Trace: [ 2744.552917] <IRQ> [<ffffffff8176e215>] dump_stack+0x45/0x57 [ 2744.552931] [<ffffffff8109bc1a>] warn_slowpath_common+0x8a/0xc0 [ 2744.552936] [<ffffffff81647c50>] ? skb_queue_purge+0x20/0x40 [ 2744.552941] [<ffffffff8109bd4a>] warn_slowpath_null+0x1a/0x20 [ 2744.552946] [<ffffffff81646911>] skb_release_head_state+0xe1/0xf0 [ 2744.552950] [<ffffffff81647b26>] skb_release_all+0x16/0x30 [ 2744.552954] [<ffffffff81647ba6>] kfree_skb+0x36/0x90 [ 2744.552958] [<ffffffff81647c50>] skb_queue_purge+0x20/0x40 [ 2744.552964] [<ffffffff81751f8d>] packet_sock_destruct+0x1d/0x90 [ 2744.552968] [<ffffffff81642053>] __sk_free+0x23/0x140 [ 2744.552973] [<ffffffff81642189>] sk_free+0x19/0x20 [ 2744.552977] [<ffffffff81647d60>] skb_complete_tx_timestamp+0x50/0x60 [ 2744.552988] [<ffffffffa02eee40>] fm10k_ts_tx_hwtstamp+0xd0/0x100 [fm10k] [ 2744.552994] [<ffffffffa02e054e>] fm10k_1588_msg_pf+0x12e/0x140 [fm10k] [ 2744.553002] [<ffffffffa02edf1d>] fm10k_tlv_msg_parse+0x8d/0xc0 [fm10k] [ 2744.553010] [<ffffffffa02eb2d0>] fm10k_mbx_dequeue_rx+0x60/0xb0 [fm10k] [ 2744.553016] [<ffffffffa02ebf98>] fm10k_sm_mbx_process+0x178/0x3c0 [fm10k] [ 2744.553022] [<ffffffffa02e09ca>] fm10k_msix_mbx_pf+0xfa/0x360 [fm10k] [ 2744.553030] [<ffffffff811030a7>] ? get_next_timer_interrupt+0x1f7/0x270 [ 2744.553036] [<ffffffff810f2a47>] handle_irq_event_percpu+0x77/0x1a0 [ 2744.553041] [<ffffffff810f2bab>] handle_irq_event+0x3b/0x60 [ 2744.553045] [<ffffffff810f5d6e>] handle_edge_irq+0x6e/0x120 [ 2744.553054] [<ffffffff81017414>] handle_irq+0x74/0x140 [ 2744.553061] [<ffffffff810bb54a>] ? atomic_notifier_call_chain+0x1a/0x20 [ 2744.553066] [<ffffffff8177777f>] do_IRQ+0x4f/0xf0 [ 2744.553072] [<ffffffff8177556d>] common_interrupt+0x6d/0x6d [ 2744.553074] <EOI> [<ffffffff81609b16>] ? cpuidle_enter_state+0x66/0x160 [ 2744.553084] [<ffffffff81609b01>] ? cpuidle_enter_state+0x51/0x160 [ 2744.553087] [<ffffffff81609cf7>] cpuidle_enter+0x17/0x20 [ 2744.553092] [<ffffffff810de101>] cpu_startup_entry+0x321/0x3c0 [ 2744.553098] [<ffffffff81764497>] rest_init+0x77/0x80 [ 2744.553103] [<ffffffff81d4f02c>] start_kernel+0x4a4/0x4c5 [ 2744.553107] [<ffffffff81d4e120>] ? early_idt_handlers+0x120/0x120 [ 2744.553110] [<ffffffff81d4e4d7>] x86_64_start_reservations+0x2a/0x2c [ 2744.553114] [<ffffffff81d4e62b>] x86_64_start_kernel+0x152/0x175 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-17fm10k: ignore invalid multicast address entriesJacob Keller
This change fixes an issue with adding an invalid multicast address using the iproute2 tool (ip maddr add <MADDR> dev <dev>). The iproute2 tool and the kernel do not validate or filter the multicast addresses when adding them to the multicast list. Thus, when synchronizing this list with an invalid entry, the action will be aborted with an error since the fm10k driver currently validates the list. Consequently, multicast entries beyond the invalid one will not be processed and communicated with the switch via the mailbox. This change makes it so that invalid addresses will simply be skipped and allows synchronizing the full list to proceed. Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-17fm10k: fold fm10k_pull_tail into fm10k_add_rx_fragAlexander Duyck
This change folds the fm10k_pull_tail call into fm10k_add_rx_frag. The advantage to doing this is that the fragment doesn't have to be modified after it is added to the skb. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-18powerpc/iommu/ioda2: Enable compile with IOV=on and IOMMU_API=offAlexey Kardashevskiy
The pnv_pci_ioda2_unset_window() function is used to do the final cleanup of a DMA window being released: - via VFIO ioctl by the guest request; - via unplugging a virtual PCI function. However the function was under #ifdef CONFIG_IOMMU_API and was missing. This moves the helper outside of IOMMU_API block and enables it for either or both IOMMU_API and PCI_IOV. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-18powerpc/include: Add opal-prd to installed uapi headersJeremy Kerr
We'll want to build the opal-prd daemon with the prd headers, so include this in the uapi headers list. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-18powerpc/powernv: fix construction of opal PRD messagesJeremy Kerr
We currently have a bug in the PRD code, where the contents of an incoming message (beyond the header) will be overwritten by the list item manipulations when adding to to the prd_msg_queue. This change reorders struct opal_prd_msg_queue_item, so that the message body doesn't overlap the list_head. We also clarify the memcpy of the message, as we're copying unnecessary bytes at the end of the message data. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-18powerpc/powernv: Increase opal-irqchip initcall priorityAlistair Popple
The eeh subsystem for powernv requires the opal event irqchip to be initialised prior to initialisation or the following errors are produced (and eeh doesn't work as expected): irq: XICS didn't like hwirq-0x9 to VIRQ17 mapping (rc=-22) pnv_eeh_post_init: Can't request OPAL event interrupt (0) On powernv eeh is initialised from a subsys_initcall due to a check for machine_is(powernv) in eeh_init(). This patch increases the initcall priority of opal_event_init() to an arch_initcall to ensure the opal event interface is initialised prior to any users of it. Signed-off-by: Alistair Popple <alistair@popple.id.au> Reported-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-17MAINTAINERS: update email for Michael TurquetteMichael Turquette
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-17Merge branch 'clk-shmobile-for-4.2' of ↵Michael Turquette
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next
2015-06-17Merge remote-tracking branch 'clk/clk-next' into clk-nextMichael Turquette
2015-06-17perf top: Allow disabling/enabling events dynamiclyArnaldo Carvalho de Melo
Now it is possible to press CTRL+z at anytime and that will disable the events being monitored, essentially turning 'top' into 'report', with pressing CTRL+z again making it enable the events again, returning to the 'top' behaviour, i.e. dynamic + decaying of older samples. One may want, for instance, play with: -d, --delay <n> number of seconds to delay between refreshes and: -z, --zero zero history across updates Plus CTRL+z to see only the events since last zeroing, etc. Suggested-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-zq7tnh5462blt2yda0bcxh5b@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17perf evlist: Add toggle_enable() methodArnaldo Carvalho de Melo
For an upcoming feature in 'perf top' we will have a hotkey to enable/disable events, so remember if the events in the list are enabled or disabled and allows toggling this state using a new method. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-64c4jvdl5feg2zhimxvokqka@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17perf trace: Fix race condition at the end of started workloadsSukadev Bhattiprolu
I get following crash on multiple systems and across several releases (at least since v3.18). Core was generated by `/tmp/perf trace sleep 0.2 '. Program terminated with signal SIGSEGV, Segmentation fault. #0 perf_mmap__read_head (mm=0x3fff9bf30070) at util/evlist.h:195 195 u64 head = ACCESS_ONCE(pc->data_head); (gdb) bt #0 perf_mmap__read_head (mm=0x3fff9bf30070) at util/evlist.h:195 #1 perf_evlist__mmap_read (evlist=0x10027f11910, idx=<optimized out>) at util/evlist.c:637 #2 0x000000001003ce4c in trace__run (argv=<optimized out>, argc=<optimized out>, trace=0x3fffd7b28288) at builtin-trace.c:2259 #3 cmd_trace (argc=<optimized out>, argv=<optimized out>, prefix=<optimized out>) at builtin-trace.c:2799 #4 0x00000000100657b8 in run_builtin (p=0x10176798 <commands+480>, argc=3, argv=0x3fffd7b2b550) at perf.c:370 #5 0x00000000100063e8 in handle_internal_command (argv=0x3fffd7b2b550, argc=3) at perf.c:429 #6 run_argv (argv=0x3fffd7b2af70, argcp=0x3fffd7b2af7c) at perf.c:473 #7 main (argc=3, argv=0x3fffd7b2b550) at perf.c:588 The problem seems to be a race condition, when the application has just exited. Some/all fds associated with the perf-events (tracepoints) go into a POLLHUP/ POLLERR state and the mmap region associated with those events are unmapped (in perf_evlist__filter_pollfd()). But we go back and do a perf_evlist__mmap_read() which assumes that the mmaps are still valid and we hit the crash. If the mapping for an event is released, its refcnt is 0 (and ->base is NULL), so ensure we have non-zero refcount before accessing the map. Note that perf-record has a similar logic but unlike perf-trace, the record__mmap_read_all() checks the evlist->mmap[i].base before accessing the map. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Zhang <zhlcindy@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20150612060003.GA19913@us.ibm.com [ Fixed it up to use atomic_read() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17perf probe: Speed up perf probe --list by caching debuginfoMasami Hiramatsu
Speed up the "perf probe --list" by caching the last used debuginfo. perf probe --list always open and load debuginfo for each entry of probe list. This takes very a long time. E.g. with vfs_* events (total 96 probes) [root@localhost perf]# time ./perf probe -l &> /dev/null real 0m25.376s user 0m24.381s sys 0m1.012s To solve this issue, this adds debuginfo_cache to cache the last used debuginfo on memory. With this fix, the perf-probe --list significantly improves its speed. [root@localhost perf]# time ./perf probe -l &> /dev/null real 0m0.161s user 0m0.136s sys 0m0.025s Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naohiro Aota <naota@elisp.net> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150617145854.19715.15314.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17perf probe: Show usage even if the last event is skippedMasami Hiramatsu
When the last part of converted events are blacklisted or out-of-text, those are skipped and perf probe doesn't show usage examples. This fixes it to show the example even if the last part of event list is skipped. E.g. without this patch, events are added, but suddenly end: # perf probe vfs_* vfs_caches_init_early is out of .text, skip it. vfs_caches_init is out of .text, skip it. Added new events: probe:vfs_fallocate (on vfs_*) probe:vfs_open (on vfs_*) ... probe:vfs_dentry_acceptable (on vfs_*) probe:vfs_load_quota_inode (on vfs_*) # With this fix: # perf probe vfs_* vfs_caches_init_early is out of .text, skip it. vfs_caches_init is out of .text, skip it. Added new events: probe:vfs_fallocate (on vfs_*) ... probe:vfs_load_quota_inode (on vfs_*) You can now use it in all perf tools, such as: perf record -e probe:vfs_load_quota_inode -aR sleep 1 Note that this can be reproduced ONLY IF the vfs_caches_init* is the last part of matched symbol list. I've checked this happens on "3.19.0-generic #18-Ubuntu" kernel binary. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naohiro Aota <naota@elisp.net> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150616115057.19906.5502.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17perf tools: Move libtraceevent dynamic list to separated LDFLAGS variableWang Nan
Commit e3d09ec8126fe2c9a3ade661e2126e215ca27a80 ("tools lib traceevent: Export dynamic symbols used by traceevent plugins") adds libtraceevent dynamic list directly into LDFLAGS, which makes all targets depend on that list through LDFLAGS. This is not good since some of targets like libgtk.so doesn't use plugin at all, but require the existance of that list because of linker options. This patch isolates the -Xlink option into LIBTRACEEVENT_DYNAMIC_LIST_LDFLAGS, makes only perf and perf.so use it. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1434552389-89144-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17perf tools: Fix a problem when opening old perf.data with different byte orderWang Nan
Following error occurs when trying to use 'perf report' on x86_64 to cross analysis a perf.data generated by an old perf on a big-endian machine: # perf report *** Error in `/home/w00229757/perf': free(): invalid next size (fast): 0x00000000032c99f0 *** ======= Backtrace: ========= /lib64/libc.so.6(+0x6eeef)[0x7ff6ff7e2eef] /lib64/libc.so.6(+0x78cae)[0x7ff6ff7eccae] /lib64/libc.so.6(+0x79987)[0x7ff6ff7ed987] /path/to/perf[0x4ac734] /path/to/perf[0x4ac829] /path/to/perf(perf_header__process_sections+0x129)[0x4ad2c9] /path/to/perf(perf_session__read_header+0x2e1)[0x4ad9e1] /path/to/perf(perf_session__new+0x168)[0x4bd458] /path/to/perf(cmd_report+0xfa0)[0x43eb70] /path/to/perf[0x47adc3] /path/to/perf(main+0x5f6)[0x42fd06] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7ff6ff795bd5] /path/to/perf[0x42fe35] ======= Memory map: ======== [SNIP] The bug is in perf_event__attr_swap(). It swaps all fields in 'struct perf_event_attr' without checking whether the swapped field exist or not. In addition, in read_event_desc() allocs memory for attr according to size read from perf.data. Therefore, if the perf.data is collected by an old perf (without aux_watermark, for example), when perf_event__attr_swap() swaping attr->aux_watermark it destroy malloc's metadata. This patch introduces boundary checking in perf_event__attr_swap(). It adds macros bswap_field_64 and bswap_field_32 into perf_event__attr_swap() to make it only swap exist fields. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1434534999-85347-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17writeback, blkio: add documentation for cgroup writeback supportTejun Heo
Update Documentation/cgroups/blkio-controller.txt to reflect the recently added cgroup writeback support. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: cgroups@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-17vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWBTejun Heo
FS_CGROUP_WRITEBACK indicates whether a file_system_type supports cgroup writeback; however, different super_blocks of the same file_system_type may or may not support cgroup writeback depending on filesystem options. This patch replaces FS_CGROUP_WRITEBACK with a per-super_block flag. super_block->s_flags carries some internal flags in the high bits but it's exposd to userland through uapi header and running out of space anyway. This patch adds a new field super_block->s_iflags to carry kernel-internal flags. It is currently only used by the new SB_I_CGROUPWB flag whose concatenated and abbreviated name is for consistency with other super_block flags. ext2_fill_super() is updated to set SB_I_CGROUPWB. v2: Added super_block->s_iflags instead of stealing another high bit from sb->s_flags as suggested by Christoph and Jan. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: linux-ext4@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-17writeback: do foreign inode detection iff cgroup writeback is enabledTejun Heo
Currently, even when a filesystem doesn't set the FS_CGROUP_WRITEBACK flag, if the filesystem uses wbc_init_bio() and wbc_account_io(), the foreign inode detection and migration logic still ends up activating cgroup writeback which is unexpected. This patch ensures that the foreign inode detection logic stays disabled when inode_cgwb_enabled() is false by not associating writeback_control's with bdi_writeback's. This also avoids unnecessary operations in wbc_init_bio(), wbc_account_io() and wbc_detach_inode() for filesystems which don't support cgroup writeback. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-17ata: ahci_mvebu: add suspend/resume supportThomas Petazzoni
This commit adds suspend/resume support to the ahci_mvebu driver. The suspend hook doesn't do anything special despite calling the generic ahci_platform_suspend_host() function. However, the resume hook has to restore the MBus windows configuration, as well as the regret option. Tested on Marvell Armada 388 GP. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-17ahci, msix: Fix build error for !PCI_MSIRobert Richter
It turned out the irq vector of the msix can be obtained from struct msix_entry. This makes the lookup function for msi_desc obsolete. This fixes a build error if PCI_MSI is unset: drivers/ata/ahci.c: In function ‘msix_get_desc’: drivers/ata/ahci.c:1210:2: error: ‘struct pci_dev’ has no member named ‘msi_list’ Catched by Fengguang's build bot. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-17Bluetooth: 6lowpan: Fix module refcountGlenn Ruben Bakke
This patch removes the additional module_put() in disconnect_all_peers() making a correct module refcount so that the module can be removed after disabling 6lowpan through debugfs. Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no> Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-17Bluetooth: 6lowpan: Fix double kfree of netdev privGlenn Ruben Bakke
This patch removes the kfree of the netdev priv in device_event() upon NETDEV_UNREGISTER event. The freeing of memory is taken care of by the netdev destructor. Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no> Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-17Bluetooth: 6lowpan: Move netdev sysfs device referenceGlenn Ruben Bakke
This patch moves the sysfs device used by the netdev from the device of the first connected peer to the hci sysfs device. Using the sysfs device of hci instead of the first connected device fixes this issue such that the sysfs group of tx-0 and bt0 kobject are still present after the last peer has been deleted and all sysfs entries can be removed. Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no> Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-17Bluetooth: 6lowpan: Rename ambiguous variableGlenn Ruben Bakke
This patch renames the variable used to trigger scheduling of delete_netdev. Changed to infinitiv in order to describe the action to be done. Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no> Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-17Bluetooth: 6lowpan: Enable delete_netdev to be scheduled when last peer is ↵Glenn Ruben Bakke
deleted This patch fixes an issue with the netdev not being unregistered when the last peer is deleted. Removing the logical negation operator on the boolean solves this issue. If the last peer is removed the condition will be true, and the delete_netdev() is scheduled. Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no> Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-17Bluetooth: btbcm: Support the BCM4354 Bluetooth UART deviceIlya Faenson
Support the BCM4354 chip and introduce vendor specific command parameter definitions. Signed-off-by: Ilya Faenson <ifaenson@broadcom.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-17Documentation: dmaengine: document DMA_CTRL_ACKRobert Jarzmik
Add documentation about acking the transfers, and their reusability. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-17dmaengine: virt-dma: don't always free descriptor upon completionRobert Jarzmik
This patch attempts to enhance the case of a transfer submitted multiple times, and where the cost of creating the descriptors chain is not negligible. This happens with big video buffers (several megabytes, ie. several thousands of linked descriptors in one scatter-gather list). In these cases, a video driver would want to do : - tx = dmaengine_prep_slave_sg() - dma_engine_submit(tx); - dma_async_issue_pending() - wait for video completion - read video data (or not, skipping a frame is also possible) - dma_engine_submit(tx) => here, the descriptors chain recalculation will take time => the dma coherent allocation over and over might create holes in the dma pool, which is counter-productive. - dma_async_issue_pending() - etc ... In order to cope with this case, virt-dma is modified to prevent freeing the descriptors upon completion if DMA_CTRL_ACK flag is set in the transfer. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-17ASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 caseAxel Lin
Fix trivial typo. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-17spi: zynq: Remove execute bitMark Brown
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-17dm stats: add support for request-based DM devicesMikulas Patocka
This makes it possible to use dm stats with DM multipath. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-06-17dm stats: collect and report histogram of IO latenciesMikulas Patocka
Add an option to dm statistics to collect and report a histogram of IO latencies. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-06-17dm stats: support precise timestampsMikulas Patocka
Make it possible to use precise timestamps with nanosecond granularity in dm statistics. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-06-17dm stats: fix divide by zero if 'number_of_areas' arg is zeroMikulas Patocka
If the number_of_areas argument was zero the kernel would crash on div-by-zero. Add better input validation. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.12+
2015-06-17dm cache: switch the "default" cache replacement policy from mq to smqMike Snitzer
The Stochastic multiqueue (SMQ) policy (vs MQ) offers the promise of less memory utilization, improved performance and increased adaptability in the face of changing workloads. SMQ also does not have any cumbersome tuning knobs. Users may switch from "mq" to "smq" simply by appropriately reloading a DM table that is using the cache target. Doing so will cause all of the mq policy's hints to be dropped. Also, performance of the cache may degrade slightly until smq recalculates the origin device's hotspots that should be cached. In the future the "mq" policy will just silently make use of "smq" and the mq code will be removed. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
2015-06-17Merge remote-tracking branches 'regmap/topic/defaults', 'regmap/topic/irq' ↵Mark Brown
and 'regmap/topic/reg-params' into regmap-next
2015-06-17Merge remote-tracking branch 'regmap/topic/core' into regmap-nextMark Brown
2015-06-17Merge remote-tracking branch 'regmap/fix/field' into regmap-linusMark Brown
2015-06-17Merge remote-tracking branch 'regmap/fix/core' into regmap-linusMark Brown
generated by cgit (git 2.34.1) at 2025-09-25 20:05:48 +0000