summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-17IB/hfi1: Fix potential NULL ptr dereferenceTadeusz Struk
This fixes potential NULL ptr dereference because IS_ERR(dd) doesn't handle NULL. Fix the issue by initializing the pointer with a not NULL error code. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/qib: Prevent context lossIra Weiny
If a context has already been assigned to an FD, prevent another assignment. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/hfi1: Prevent context lossIra Weiny
If a context has already been assigned to an FD, prevent another assignment. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/hfi1: Increase packet egress timeoutJubin John
The current value of 500us for the packet egress timeout is too small which causes the host to declare failure on draining packets too early and unnecessarily bounces the link. Increase this to 50ms taking into account the switch packet discard timer default and the worst case per-VL package drainage rate. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/rdmavt: Correct warning during QPN allocationBrian Welty
Correct calculation of the low order bits which should be unset based on use of qos_shift parameter when assigning QPN. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/rdmavt: Correct required callback functions for MODIFY_QPBrian Welty
Functions required for MODIFY_PORT were incorrectly being required for MODIFY_QP. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/hfi1: Fix credit return threshold adjustmentJubin John
The credit return threshold adjustment on mtu change algorithm does not take into account all the kernel send contexts that are assigned per VL. Use the pio send context map to adjust the credit return thresholds for all the allocated and assigned kernel send contexts based on the MTU adjustment per VL. The pio send context map can be changed dynamically based on the actual number of operational vls which is set by the fabric manager. When this happens update the credit return threshold values for all the remapped kernel send contexts. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/cma: Make the code easier to verifyBart Van Assche
Static source code analysis tools like smatch cannot handle functions that lock or not lock a mutex depending on the value of the arguments. Hence inline the function cma_disable_callback(). Additionally, this patch realizes a small performance optimization by reducing the number of mutex_lock() and mutex_unlock() calls in the modified functions. With this patch applied smatch no longer complains about source file cma.c. Without this patch smatch reports the following for this source file: drivers/infiniband/core/cma.c:1959: cma_req_handler() warn: inconsistent returns 'mutex:&listen_id->handler_mutex'. Locked on: line 1880 line 1959 Unlocked on: line 1941 drivers/infiniband/core/cma.c:2112: iw_conn_req_handler() warn: inconsistent returns 'mutex:&listen_id->handler_mutex'. Locked on: line 2048 Unlocked on: line 2112 Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Leon Romanovsky <leonro@mellanox.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-18Merge branch 'acpica-fixes'Rafael J. Wysocki
* acpica-fixes: Revert "ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write()"
2016-06-18Merge branches 'pm-opp' and 'pm-cpufreq-fixes'Rafael J. Wysocki
* pm-opp: PM / OPP: Add 'UNKNOWN' status for shared_opp in struct opp_table * pm-cpufreq-fixes: cpufreq: intel_pstate: Adjust _PSS[0] freqeuency if needed
2016-06-17IB/mlx4: Properly initialize GRH TClass and FlowLabel in AHsJason Gunthorpe
When this code was reworked for IBoE support the order of assignments for the sl_tclass_flowlabel got flipped around resulting in TClass & FlowLabel being permanently set to 0 in the packet headers. This breaks IB routers that rely on these headers, but only affects kernel users - libmlx4 does this properly for user space. Cc: stable@vger.kernel.org Fixes: fa417f7b520e ("IB/mlx4: Add support for IBoE") Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17drm/amdgpu: fix num_rbs exposed to userspace (v2)Alex Deucher
This was accidently broken for harvest cards when the code was refactored for Polaris support. v2: multiply by shader engines. Noticed by Nicolai. Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-06-17Revert "Staging: rtl8188eu: rtw_efuse: Use sizeof type *pointer instead of ↵Hans de Goede
sizeof type." This reverts commit b5e12ec38331 ("Staging: rtl8188eu: rtw_efuse: Use sizeof type *pointer instead of sizeof type."). This commit is wrong, the rtw_malloc2d helper function takes the size of the array elements as its 3th argument, whereas sizeof(*eFuseWord) gives the size of a pointer instead of the size of a u16. Since sizeof(void *) > sizeof(u16) this has no adverse effects, but it is still wrong. Cc: Sandhya Bankar <bankarsandhya512@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-17Revert "Staging: drivers: rtl8188eu: use sizeof(*ptr) instead of sizeof(struct)"Hans de Goede
This reverts commit 99aded71b52c ("Staging: drivers: rtl8188eu: use sizeof(*ptr) instead of sizeof(struct)"). This commit is wrong, as adapt->HalData has a type of "void *", so now we are allocating a much to small struct, which causes the driver to overwrite random memory which leads to a non working driver and various system crashes. Cc: Jacky Boen <aqiank@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-17drm/amdgpu: missing bounds check in amdgpu_set_pp_force_state()Dan Carpenter
There is no limit on high "idx" can go. It should be less than ARRAY_SIZE(data.states) which is 16. The "data" variable wasn't declared in that scope so I shifted the code around a bit to make it work. Also I made "idx" unsigned. Fixes: f3898ea12fc1 ('drm/amd/powerplay: add some sysfs interfaces for powerplay.') Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-17Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The main things are getting kgdb up and running with upstream GDB after a protocol change was reverted and fixing our spin_unlock_wait and spin_is_locked implementations after doing some similar work with PeterZ on the qspinlock code last week. Whilst we haven't seen any failures in practice, it's still worth getting this fixed. Summary: - Plug the ongoing spin_unlock_wait/spin_is_locked mess - KGDB protocol fix to sync w/ GDB - Fix MIDR-based PMU probing for old 32-bit SMP systems (OMAP4/Realview) - Minor tweaks to the fault handling path" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kgdb: Match pstate size with gdbserver protocol arm64: spinlock: Ensure forward-progress in spin_unlock_wait arm64: spinlock: fix spin_unlock_wait for LSE atomics arm64: spinlock: order spin_{is_locked,unlock_wait} against local locks arm: pmu: Fix non-devicetree probing arm64: mm: mark fault_info table const arm64: fix dump_instr when PAN and UAO are in use
2016-06-17Merge tag 'iommu-fixes-v4.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "Three patches queued up: - Fix for ARM-SMMU to add a missing iommu-ops callback which is required by common iommu code - Fix for the rockchip iommu where the wrong MMUs got the commands - A regression fix for the Intel VT-d driver. The regression only showed up on X58 chipsets with more than one iommu. These chipsets seem to require that QI is enabled on all IOMMUs before it can be used" * tag 'iommu-fixes-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Enable QI on all IOMMUs before setting root entry iommu/rockchip: Fix zap cache during device attach iommu/arm-smmu: Wire up map_sg for arm-smmu-v3
2016-06-17Merge tag 'for-4.7-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fixes from Jacek Anaszewski: - Fix brightness setting upon hardware blinking enabled - Handle suspend/resume in heartbeat trigger * tag 'for-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: handle suspend/resume in heartbeat trigger leds: core: Fix brightness setting upon hardware blinking enabled
2016-06-17Merge branch 'for-chris' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.7
2016-06-17Btrfs: btrfs_check_super_valid: Allow 4096 as stripesizeChandan Rajendra
Older btrfs-progs/mkfs.btrfs sets 4096 as the stripesize. Hence restricting stripesize to be equal to sectorsize would cause super block validation to return an error on architectures where PAGE_SIZE is not equal to 4096. Hence as a workaround, this commit allows stripesize to be set to 4096 bytes. Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-17btrfs: remove build fixup for qgroup_account_snapshotDavid Sterba
Introduced in 2c1984f244838477aab ("btrfs: build fixup for qgroup_account_snapshot") as temporary bisectability build fixup. Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-17btrfs: use new error message helper in qgroup_account_snapshotDavid Sterba
We've renamed btrfs_std_error, this one is left from last merge. Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-17btrfs: avoid blocking open_ctree from cleaner_kthreadZygo Blaxell
This fixes a problem introduced in commit 2f3165ecf103599f82bf0ea254039db335fb5005 "btrfs: don't force mounts to wait for cleaner_kthread to delete one or more subvolumes". open_ctree eventually calls btrfs_replay_log which in turn calls btrfs_commit_super which tries to lock the cleaner_mutex, causing a recursive mutex deadlock during mount. Instead of playing whack-a-mole trying to keep up with all the functions that may want to lock cleaner_mutex, put all the cleaner_mutex lockers back where they were, and attack the problem more directly: keep cleaner_kthread asleep until the filesystem is mounted. When filesystems are mounted read-only and later remounted read-write, open_ctree did not set fs_info->open and neither does anything else. Set this flag in btrfs_remount so that neither btrfs_delete_unused_bgs nor cleaner_kthread get confused by the common case of "/" filesystem read-only mount followed by read-write remount. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-17Btrfs: don't BUG_ON() in btrfs_orphan_addJosef Bacik
This is just a screwup for developers, so change it to an ASSERT() so developers notice when things go wrong and deal with the error appropriately if ASSERT() isn't enabled. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-17btrfs: account for non-CoW'd blocks in btrfs_abort_transactionJeff Mahoney
The test for !trans->blocks_used in btrfs_abort_transaction is insufficient to determine whether it's safe to drop the transaction handle on the floor. btrfs_cow_block, informed by should_cow_block, can return blocks that have already been CoW'd in the current transaction. trans->blocks_used is only incremented for new block allocations. If an operation overlaps the blocks in the current transaction entirely and must abort the transaction, we'll happily let it clean up the trans handle even though it may have modified the blocks and will commit an incomplete operation. In the long-term, I'd like to do closer tracking of when the fs is actually modified so we can still recover as gracefully as possible, but that approach will need some discussion. In the short term, since this is the only code using trans->blocks_used, let's just switch it to a bool indicating whether any blocks were used and set it when should_cow_block returns false. Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Jeff Mahoney <jeffm@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-17Btrfs: check if extent buffer is aligned to sectorsizeLiu Bo
Thanks to fuzz testing, we can pass an invalid bytenr to extent buffer via alloc_extent_buffer(). An unaligned eb can have more pages than it should have, which ends up extent buffer's leak or some corrupted content in extent buffer. This adds a warning to let us quickly know what was happening. Now that alloc_extent_buffer() no more returns NULL, this changes its caller and callers of its caller to match with the new error handling. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-17btrfs: Use correct format specifierHeinrich Schuchardt
Component mirror_num of struct btrfsic_block is defined as unsigned int. Use %u as format specifier. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-06-17ata: sata_mv: fix mis-conversion in mv_write_cached_reg()Ben Dooks
Fix the signed issue in mv_write_cached_reg() where the laddr is assigned from a (long)addr instead of (unsigned long)addr. Fixes the following warnings: drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression drivers/ata/sata_mv.c:989:26: warning: cast removes address space of expression Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-06-17gpio: make library immune to error pointersLinus Walleij
Most functions that take a GPIO descriptor in need to check the descriptor for IS_ERR(). We do this mostly in the VALIDATE_DESC() macro except for the gpiod_to_irq() function which needs special handling. Cc: stable@vger.kernel.org Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-17gpio: make sure gpiod_to_irq() returns negative on NULL descLinus Walleij
commit 54d77198fdfbc4f0fe11b4252c1d9c97d51a3264 ("gpio: bail out silently on NULL descriptors") doesn't work for gpiod_to_irq(): drivers assume that NULL descriptors will give negative IRQ numbers in return. It has been pointed out that returning 0 is NO_IRQ and that drivers should be amended to treat this as an error, but that is for the longer term: now let us repair the semantics. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Reported-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-17phy: bcm-ns-usb2: checking the wrong variableDan Carpenter
We intended to test "usb2->phy" here instead of "dev". Fixes: d3feb4067335 ('phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-17phy-sun4i-usb: fix missing __iomem *Ben Dooks
Fix the missing __iomem attribute in sun4i_usb_phy_write() function. This fixes the following sparse warnings: drivers/phy/phy-sun4i-usb.c:178:39: warning: incorrect type in initializer (different address spaces) drivers/phy/phy-sun4i-usb.c:178:39: expected void *phyctl drivers/phy/phy-sun4i-usb.c:178:39: got void [noderef] <asn:2>* drivers/phy/phy-sun4i-usb.c:185:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:185:17: expected void volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:185:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:189:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:189:24: expected void const volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:189:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:196:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:196:17: expected void volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:196:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:199:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:199:24: expected void const volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:199:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:205:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:205:17: expected void volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:205:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:208:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:208:24: expected void const volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:208:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:210:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:210:17: expected void volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:210:17: got void *phyctl drivers/phy/phy-sun4i-usb.c:212:24: warning: incorrect type in argument 1 (different address spaces) drivers/phy/phy-sun4i-usb.c:212:24: expected void const volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:212:24: got void *phyctl drivers/phy/phy-sun4i-usb.c:214:17: warning: incorrect type in argument 2 (different address spaces) drivers/phy/phy-sun4i-usb.c:214:17: expected void volatile [noderef] <asn:2>*addr drivers/phy/phy-sun4i-usb.c:214:17: got void *phyctl Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-17phy: phy-sun4i-usb: Fix optional gpios failing probeQuentin Schulz
The interrupt 0 is not a valid interrupt number. In the event where the retrieval of the vbus-det gpio would return null, the gpiod_to_irq callback would return 0, while the current code makes the assumption that it is a valid interrupt, and would go on calling request_irq. Obviously, this would fail, preventing the driver from probing properly, while the vbus and id gpios are optional. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-17phy: rockchip-dp: fix return value check in rockchip_dp_phy_probe()Wei Yongjun
In case of error, the function devm_kzalloc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-17phy: rcar-gen3-usb2: fix unexpected repeat interrupts of VBUS changeYoshihiro Shimoda
This patch fixes an issue that the driver is possible to cause unexpected repeat interrupts if a board condition is wrong (e.g. even if the ID pin is as function, a board supplies the VBUS.) The reason why unexpected repeat interrupts happen is: 1) The driver changed the mode to function if it detected the ID pin is high and the VBUS is high. 2) After the driver changed function mode, it disabled the "VBUS control" feature. Then, the VBUS signal will be low. 3) Since the VBUS change interruption happened, the driver checked the ID pin and VBUS. 4) Since VBUS was low, the driver changed the mode to host and enabled the "VBUS control" feature. Then the VBUS signal will be high. 5) Since the VBUS change interruption happened, the driver did 1) above. So, this patch modified the condition in rcar_gen3_device_recognition() to check the ID pin only. Fixes: 1114e2d (phy: rcar-gen3-usb2: change the mode to OTG on the combined channel) Cc: <stable@vger.kernel.org> # v4.5+ Reported-by: Simon Horman <horms@verge.net.au> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-17ALSA: hdac_regmap - fix the register access for runtime PMJaroslav Kysela
Call path: 1) snd_hdac_power_up_pm() 2) snd_hdac_power_up() 3) pm_runtime_get_sync() 4) __pm_runtime_resume() 5) rpm_resume() The rpm_resume() returns 1 when the device is already active. Because the return value is unmodified, the hdac regmap read/write functions should allow this value for the retry I/O operation, too. Signed-off-by: Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-17netfilter: xt_SYNPROXY: include missing <linux/types.h>Pablo Neira Ayuso
./usr/include/linux/netfilter/xt_SYNPROXY.h:11: found __[us]{8,16,32,64} type without #include <linux/types.h> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-06-17netfilter: xt_SYNPROXY: add missing header to KbuildPablo Neira Ayuso
Matt Whitlock says: Without this line, the file xt_SYNPROXY.h does not get installed in /usr/include/linux/netfilter/, and thus user-space programs cannot make use of it. Reported-by: Matt Whitlock <kernel@mattwhitlock.name> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-06-17[media] drm: rcar-du: Add Z-order support for VSP planesLaurent Pinchart
Make the Z-order of VSP planes configurable through the zpos property, exactly as for the native DU planes. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-17[media] drm: rcar-du: Add alpha support for VSP planesLaurent Pinchart
Make the global alpha multiplier of VSP planes configurable through the alpha property, exactly as for the native DU planes. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-17[media] v4l: vsp1: Group DRM RPF parameters in a structureLaurent Pinchart
The vsp1_du_atomic_update_ext() function takes 7 RPF configuration parameters, and more will likely be added later. This makes the code difficult to read and error-prone as multiple parameters have the same type. Make the API safer and easier to extend in the future by grouping all parameters in a structure. Use macro magic to ease the transition to the new function by allowing the old and new functions to be called using the same name. The macros and static inline wrapper will be removed as soon as the caller is updated. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-17[media] v4l: vsp1: Move frame sequence number from video node to pipelineLaurent Pinchart
The frame sequence number is global to the pipeline, there's no need to store copies in each video node. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-17[media] v4l: vsp1: Make vsp1_entity_get_pad_compose() more genericLaurent Pinchart
Turn the helper into a function that can retrieve crop and compose selection rectangles. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-17[media] v4l: vsp1: Replace container_of() with dedicated macroLaurent Pinchart
Add a macro to cast from a struct media_entity to a struct vsp1_entity to replace the manual implementations. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-17[media] v4l: vsp1: Add output node value to routing tableLaurent Pinchart
The output node value indicates the value to be used in a sampling point register to use the node as the source of histogram data. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-17[media] v4l: vsp1: Add FCP supportLaurent Pinchart
On some platforms the VSP performs memory accesses through an FCP. When that's the case get a reference to the FCP from the VSP DT node and enable/disable it at runtime as needed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-17[media] v4l: vsp1: Don't handle clocks manuallyLaurent Pinchart
The power domain performs functional clock handling when using runtime PM, there's no need to enable and disable the clock manually. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-17[media] v4l: vsp1: Implement runtime PM supportLaurent Pinchart
Replace the manual refcount and clock management code by runtime PM. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-17[media] v4l: Add Renesas R-Car FCP driverLaurent Pinchart
The FCP is a companion module of video processing modules in the Renesas R-Car Gen3 SoCs. It provides data compression and decompression, data caching, and conversion of AXI transactions in order to reduce the memory bandwidth. The driver is not meant to be used standalone but provides an API to the video processing modules to control the FCP. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-17[media] dt-bindings: Add Renesas R-Car FCP DT bindingsLaurent Pinchart
The FCP is a companion module of video processing modules in the Renesas R-Car Gen3 SoCs. It provides data compression and decompression, data caching, and conversion of AXI transactions in order to reduce the memory bandwidth. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit (git 2.34.1) at 2025-09-23 15:56:27 +0000