Age | Commit message (Collapse) | Author |
|
Fix those warnings:
Documentation/linux_tv/media/v4l/open:38: WARNING: Literal block ends without a blank line; unexpected unindent.
Documentation/linux_tv/media/v4l/open:45: WARNING: Literal block ends without a blank line; unexpected unindent.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The ioctl is declared twice. This causes the following warning:
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/vidioc-g-edid:7:
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The asterisks cause parsing warnings with Sphinx:
Documentation/linux_tv/media/dvb/fe_property_parameters:954: WARNING: Inline substitution_reference start-string without end-string.
/devel/v4l/patchwork/Documentation/linux_tv/media/dvb/fe_property_parameters:993: WARNING: Inline emphasis start-string without end-string.
On the first warning, the ISDB-T layer enabled description is a
kind of ackward. Improve it.
For the second one, IMHO, it is clearer to use [A-C], as it
shows what are the real possibilities, than using asterisk.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Unescaped * causes warnings on Sphinx.
Add an escape at hist-v4l2 occurrences.
At libv4l-introduction, the best is do declare the function
prototypes as C code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The conversion didn't add blank lines where needed, but it
added were it weren't ;)
Fix it, to make it to parse correctly by Sphinx. This also
fixes a bunch or warnings:
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/fdl-appendix:44: WARNING: Explicit markup ends without a blank line; unexpected unindent.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/fdl-appendix:52: WARNING: Explicit markup ends without a blank line; unexpected unindent.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/fdl-appendix:58: WARNING: Explicit markup ends without a blank line; unexpected unindent.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/fdl-appendix:71: WARNING: Explicit markup ends without a blank line; unexpected unindent.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/fdl-appendix:78: WARNING: Explicit markup ends without a blank line; unexpected unindent.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/fdl-appendix:84: WARNING: Explicit markup ends without a blank line; unexpected unindent.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/fdl-appendix:107: WARNING: Explicit markup ends without a blank line; unexpected unindent.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are lots of warnings there:
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/pixfmt-007:74: ERROR: Unexpected indentation.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/pixfmt-007:89: ERROR: Unexpected indentation.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/pixfmt-007:168: ERROR: Unexpected indentation.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/pixfmt-007:183: ERROR: Unexpected indentation.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/pixfmt-007:206: ERROR: Unexpected indentation.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/pixfmt-007:216: ERROR: Unexpected indentation.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/pixfmt-007:292: ERROR: Unexpected indentation.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/pixfmt-007:308: ERROR: Unexpected indentation.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/pixfmt-007:393: ERROR: Unexpected indentation.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/pixfmt-007:478: ERROR: Unexpected indentation.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/pixfmt-007:657: ERROR: Unexpected indentation.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/pixfmt-007:735: ERROR: Unexpected indentation.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/pixfmt-007:746: ERROR: Unexpected indentation.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/pixfmt-007:822: ERROR: Unexpected indentation.
/devel/v4l/patchwork/Documentation/linux_tv/media/v4l/pixfmt-007:833: ERROR: Unexpected indentation.
Also, sometimes the :sup: tag was ignored. Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fix from Miklos Szeredi:
"This makes sure userspace filesystems are not broken by the parallel
lookups and readdir feature"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: serialize dirops by default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"This contains fixes for a dentry leak, a regression in 4.6 noticed by
Docker users and missing write access checking in truncate"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: warn instead of error if d_type is not supported
ovl: get_write_access() in truncate
ovl: fix dentry leak for default_permissions
|
|
Fix Sphinx those warnings:
WARNING: undefined label: fdl-modified>`as given on the :ref:`title page <fdl-title-page (if the link has no caption the label must precede a section header)
WARNING: undefined label: v4l2-pix-fmt-yuv420 (if the link has no caption the label must precede a section $
WARNING: undefined label: pixfmt-srggb10 (if the link has no caption the label must precede a section heade$
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
On several places, instead of using references, the code was
using some other tag. Not sure if this was due to the conversion,
or if something were already wrong on the DocBook. In any case,
let's fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
All error codes should be const. Most are, but there are
lots of places where we forgot to add <constant> at the DocBook.
Fix those via this small script:
for i in $(git grep -lE "\s+E[A-Z]+\b" Documentation/linux_tv/); do perl -ne 's,([^\`])\b(E[A-Z]+)\b,\1``\2``,g; print $_' <$i >a && mv a $i; done
As there are false positives, we needed to merge only the changes
that make sense, skipping the c blocks and skipping things like
EDID, EN, ETS that were also converted by the above code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The example captions got stripped by the conversion to ReST.
Re-add.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
On the example captions, use always <chapter>.<number>., because:
1) it matches the DocBook;
2) it would mean less changes if we need to add a new example,
as only one chapter will be affected.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The ReST markup is limited: it doesn't accept a const just
after a reference. So, change the documentation to avoid such
constraint.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The conversion on this file didn't end too well. fix the found
issues:
1) Sphinix seems to not allow things like *foo :ref:`bar`*. At least
on this document, it did the wrong thing. So, change the logic to
something that will work fine with ReST format;
2) Some ioctl pointers were not looking nice;
3) the captions on the examples got discarded;
4) The notes specific to each example were not converted well.
Again, we'll need to replace it for a simpler design, as Sphinx
is a way more limited than DocBook.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There is a missing escape caracter, causing troubles at the
format of one of the paragraphs. Also, the ioctl description
was producing some warnings about wrong identation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The c language parser checks if there are duplicated object
definitions. That causes lots of warnings like:
WARNING: duplicate C object description of ioctl
Let's remove those by telling Sphinx that the language for
those objects are c++. The look of the descriptions will
be close, and the warnings will be gone.
Please notice that we had to keep a few of them as C, as
the c++ parser seems to be broken when it finds an enum.
Yet, this reduced from 219 warnings to 143, with is
a good thing.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This chapter is referenced on several parts of the extended
controls. Change the title to make it nicer where it is
referenced.
Ok, we might, instead, just change the name for the references
to only mention the oldest ioctl, but IMHO, it is better to
keep the name of all ioctls where it is referenced.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Instead of using a constant, use references, just like the
other references for ioctl's.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The conversion broke references and captions for examples.
Fix the missing reference for control enumeration.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Those got removed by the doc conversion.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This auto-generated file is bogus: it just adds a toc for two
other files. Instead, just move the controls and extended-controls
directly to the common file.
this avoids a blank page, and better organize the document.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Those got lost during format conversion.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The captions were lost during the format conversion.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
As VIDIOC_G_foo is the reference used for VIDIOC_S_foo and
VIDIOC_TRY_foo, we need to explicitly name the reference, as
otherwise, it will mention the three ioctls altogether, with
is not what we want.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
overlay needs underlying fs to support d_type. Recently I put in a
patch in to detect this condition and started failing mount if
underlying fs did not support d_type.
But this breaks existing configurations over kernel upgrade. Those who
are running docker (partially broken configuration) with xfs not
supporting d_type, are surprised that after kernel upgrade docker does
not run anymore.
https://github.com/docker/docker/issues/22937#issuecomment-229881315
So instead of erroring out, detect broken configuration and warn
about it. This should allow existing docker setups to continue
working after kernel upgrade.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 45aebeaf4f67 ("ovl: Ensure upper filesystem supports d_type")
Cc: <stable@vger.kernel.org> 4.6
|
|
Pull MIPS fix from Ralf Baechle:
"Only a single fix for 4.7 pending at this point. It fixes an issue
that may lead to corruption of the cache mode bits in the page table"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Fix possible corruption of cache mode by mprotect.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- tm: Always reclaim in start_thread() for exec() class syscalls from
Cyril Bur
- tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0 from Michael
Neuling
- eeh: Fix wrong argument passed to eeh_rmv_device() from Gavin Shan
- Initialise pci_io_base as early as possible from Darren Stevens
* tag 'powerpc-4.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Initialise pci_io_base as early as possible
powerpc/tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0
powerpc/eeh: Fix wrong argument passed to eeh_rmv_device()
powerpc/tm: Always reclaim in start_thread() for exec() class syscalls
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes frlm Dave Airlie:
"Just some AMD and Intel fixes, the AMD ones are further production
Polaris fixes, and the Intel ones fix some early timeouts, some PCI ID
changes and a couple of other fixes.
Still a bit Internet challenged here, hopefully end of next week will
solve it"
* tag 'drm-fixes-for-v4.7-rc6' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Fix missing unlock on error in i915_ppgtt_info()
drm/amd/powerplay: workaround for UVD clock issue
drm/amdgpu: add ACLK_CNTL setting for polaris10
drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11.
drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10.
drm/i915: Removing PCI IDs that are no longer listed as Kabylake.
drm/i915: Add more Kabylake PCI IDs.
drm/i915: Avoid early timeout during AUX transfers
drm/i915/hsw: Avoid early timeout during LCPLL disable/restore
drm/i915/lpt: Avoid early timeout during FDI PHY reset
drm/i915/bxt: Avoid early timeout during PLL enable
drm/i915: Refresh cached DP port register value on resume
drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation
drm/amd/powerplay: disable FFC.
drm/amd/powerplay: add some definition for FFC feature on polaris.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver-specific fixes for SPI, all in the normal important
if you hit them category especially the rockchip driver fix which
addresses a race which has been exposed more frequently with some
recent performance improvements"
* tag 'spi-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sunxi: fix transfer timeout
spi: sun4i: fix FIFO limit
spi: rockchip: Signal unfinished DMA transfers
spi: spi-ti-qspi: Suspend the queue before removing the device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Two small fixes for the regulator subsystem - one fixing a crash with
one of the devices supported by the max77620 driver, another fixing
startup for the anatop regulator when it starts up with the regulator
in bypass mode"
* tag 'regulator-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max77620: check for valid regulator info
regulator: anatop: allow regulator to be in bypass mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A small fix for the newly added oxnas clk driver and a handful of
rockchip clk driver fixes for newly added rk3399 support"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Fix return value check in oxnas_stdclk_probe()
clk: rockchip: release io resource when failing to init clk on rk3399
clk: rockchip: fix cpuclk registration error handling
clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization"
clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src
clk: rockchip: mark rk3399 GIC clocks as critical
clk: rockchip: initialize flags of clk_init_data in mmc-phase clock
|
|
git://anongit.freedesktop.org/drm-intel into drm-fixes
here's a batch of i915 fixes for 4.7.
* tag 'drm-intel-fixes-2016-06-30' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Fix missing unlock on error in i915_ppgtt_info()
drm/i915: Removing PCI IDs that are no longer listed as Kabylake.
drm/i915: Add more Kabylake PCI IDs.
drm/i915: Avoid early timeout during AUX transfers
drm/i915/hsw: Avoid early timeout during LCPLL disable/restore
drm/i915/lpt: Avoid early timeout during FDI PHY reset
drm/i915/bxt: Avoid early timeout during PLL enable
drm/i915: Refresh cached DP port register value on resume
|
|
into drm-fixes
Just a few more late fixes for Polaris cards.
* 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/powerplay: workaround for UVD clock issue
drm/amdgpu: add ACLK_CNTL setting for polaris10
drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11.
drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10.
drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation
drm/amd/powerplay: disable FFC.
drm/amd/powerplay: add some definition for FFC feature on polaris.
|
|
The following testcase may result in a page table entries with a invalid
CCA field being generated:
static void *bindstack;
static int sysrqfd;
static void protect_low(int protect)
{
mprotect(bindstack, BINDSTACK_SIZE, protect);
}
static void sigbus_handler(int signal, siginfo_t * info, void *context)
{
void *addr = info->si_addr;
write(sysrqfd, "x", 1);
printf("sigbus, fault address %p (should not happen, but might)\n",
addr);
abort();
}
static void run_bind_test(void)
{
unsigned int *p = bindstack;
p[0] = 0xf001f001;
write(sysrqfd, "x", 1);
/* Set trap on access to p[0] */
protect_low(PROT_NONE);
write(sysrqfd, "x", 1);
/* Clear trap on access to p[0] */
protect_low(PROT_READ | PROT_WRITE | PROT_EXEC);
write(sysrqfd, "x", 1);
/* Check the contents of p[0] */
if (p[0] != 0xf001f001) {
write(sysrqfd, "x", 1);
/* Reached, but shouldn't be */
printf("badness, shouldn't happen but does\n");
abort();
}
}
int main(void)
{
struct sigaction sa;
sysrqfd = open("/proc/sysrq-trigger", O_WRONLY);
if (sigprocmask(SIG_BLOCK, NULL, &sa.sa_mask)) {
perror("sigprocmask");
return 0;
}
sa.sa_sigaction = sigbus_handler;
sa.sa_flags = SA_SIGINFO | SA_NODEFER | SA_RESTART;
if (sigaction(SIGBUS, &sa, NULL)) {
perror("sigaction");
return 0;
}
bindstack = mmap(NULL,
BINDSTACK_SIZE,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
if (bindstack == MAP_FAILED) {
perror("mmap bindstack");
return 0;
}
printf("bindstack: %p\n", bindstack);
run_bind_test();
printf("done\n");
return 0;
}
There are multiple ingredients for this:
1) PAGE_NONE is defined to _CACHE_CACHABLE_NONCOHERENT, which is CCA 3
on all platforms except SB1 where it's CCA 5.
2) _page_cachable_default must have bits set which are not set
_CACHE_CACHABLE_NONCOHERENT.
3) Either the defective version of pte_modify for XPA or the standard
version must be in used. However pte_modify for the 36 bit address
space support is no affected.
In that case additional bits in the final CCA mode may generate an invalid
value for the CCA field. On the R10000 system where this was tracked
down for example a CCA 7 has been observed, which is Uncached Accelerated.
Fixed by:
1) Using the proper CCA mode for PAGE_NONE just like for all the other
PAGE_* pte/pmd bits.
2) Fix the two affected variants of pte_modify.
Further code inspection also shows the same issue to exist in pmd_modify
which would affect huge page systems.
Issue in pte_modify tracked down by Alastair Bridgewater, PAGE_NONE
and pmd_modify issue found by me.
The history of this goes back beyond Linus' git history. Chris Dearman's
commit 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0 ("[MIPS] Allow setting of
the cache attribute at run time.") missed the opportunity to fix this
but it was originally introduced in lmo commit
d523832cf12007b3242e50bb77d0c9e63e0b6518 ("Missing from last commit.")
and 32cc38229ac7538f2346918a09e75413e8861f87 ("New configuration option
CONFIG_MIPS_UNCACHED.")
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix an expression in the ACPI PCI IRQ management code added by a
recent commit that overlooked missing parens in it, so the result of
the computation is incorrect in some cases (Sinan Kaya)"
* tag 'acpi-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI,PCI,IRQ: correct operator precedence
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Three cpufreq fixes, one in the core (stable-candidate) and two in
drivers (intel_pstate and cpufreq-dt).
Specifics:
- Fix a recent intel_pstate regression that caused the number of
wakeups to increase significantly on an idle system in some cases
due to excessive synchronize_sched() invocations (Rafael Wysocki).
- Fix unnecessary invocations of WARN_ON() in the cpufreq core after
cpufreq has been suspended introduced during the 4.6 cycla (Rafael
Wysocki).
- Fix an error code path in the cpufreq-dt-platdev driver that
forgets to drop a reference to a DT node (Masahiro Yamada)"
* tag 'pm-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Avoid false-positive WARN_ON()s in cpufreq_update_policy()
cpufreq: dt: call of_node_put() before error out
intel_pstate: Do not clear utilization update hooks on policy changes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"Tmpfs readdir throughput regression fix (this cycle) + some -stable
fodder all over the place.
One missing bit is Miklos' tonight locks.c fix - NFS folks had already
grabbed that one by the time I woke up ;-)"
[ The locks.c fix came through the nfsd tree just moments ago ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
namespace: update event counter when umounting a deleted dentry
9p: use file_dentry()
ceph: fix d_obtain_alias() misuses
lockless next_positive()
libfs.c: new helper - next_positive()
dcache_{readdir,dir_lseek}(): don't bother with nested ->d_lock
|
|
Pull lockd/locks fixes from Bruce Fields:
"One fix for lockd soft lookups in an error path, and one fix for file
leases on overlayfs"
* tag 'nfsd-4.7-3' of git://linux-nfs.org/~bfields/linux:
locks: use file_inode()
lockd: unregister notifier blocks if the service fails to come up completely
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull more MFD fixes from Lee Jones:
"Apologies for missing these from the first pull request.
Final patches fixing Reset API change"
* tag 'mfd-fixes-4.7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
usb: dwc3: st: Use explicit reset_control_get_exclusive() API
phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() API
phy: miphy28lp: Inform the reset framework that our reset line may be shared
|
|
This patch fix some spelling typo found in ocfs2-online-filecheck.txt
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
If the user requested specific DocBooks to be built using 'make
DOCBOOKS=foo.xml htmldocs', assume no Sphinx build is desired. This
check is transitional, and can be removed once we drop the DocBook
build.
Cc: Markus Heiser <markus.heiser@darmarit.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fixes: 22cba31bae9d ("Documentation/sphinx: add basic working Sphinx configuration and build")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This was broken when updating the documentation targets for the Sphinx
build, and moving from %docs target pattern to explicitly listed
targets.
Cc: Markus Heiser <markus.heiser@darmarit.de>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Fixes: 22cba31bae9d ("Documentation/sphinx: add basic working Sphinx configuration and build")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"1/ Two regression fixes since v4.6: one for the byte order of a sysfs
attribute (bz121161) and another for QEMU 2.6's NVDIMM _DSM (ACPI
Device Specific Method) implementation that gets tripped up by new
auto-probing behavior in the NFIT driver.
2/ A fix tagged for -stable that stops the kernel from
clobbering/ignoring changes to the configuration of a 'pfn'
instance ("struct page" driver). For example changing the
alignment from 2M to 1G may silently revert to 2M if that value is
currently stored on media.
3/ A fix from Eric for an xfstests failure in dax. It is not
currently tagged for -stable since it requires an 8-exabyte file
system to trigger, and there appear to be no user visible side
effects"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nfit: fix format interface code byte order
dax: fix offset overflow in dax_io
acpi, nfit: fix acpi_check_dsm() vs zero functions implemented
libnvdimm, pfn, dax: fix initialization vs autodetect for mode + alignment
|
|
There were lots of consts at the media docbook that should
be, instead, references. Convert the ones that can easily
be done by an automatic script.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are lots of internal references in the form:
:ref:`foo <foo>`
Simplify them to be just: :ref:`foo`.
Patch generated via this small script:
for j in $(find . -name '*'); do echo $j; perl -ne 'if (m/\`(\S+)\s*\<(\S+)\>\`/) { if (!($1=~'http') && $1 eq $2) { s,\s*\<(\S+)\>,,; } } print $_' <$j >a && mv a $j; done
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Due to a limitation at the DocBook language, the references
were using lowercase and slashes, instead of the name of the
ioctls. On ReST, make them identical. This will hopefully
help to cleanup the code a little bit.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are several constants there that should be, instead,
cross-references. Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are two examples in the code, but the captions of them
were lost during the ReST conversion. Manually add them again.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The Video4Linux documentation is big. We want to numerate the
items, as it makes easier to reference an item while discussing
the document on meetings.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|