summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-10drm/panel: p079zca: Support Innolux P097PFG panelLin Huang
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel, it reuse the Innolux P079ZCA panel driver. Changes in v2: - None Changes in v3: - None Changes in v4: - None Changes in v5: - Document source of init-commands - 4 lanes per DSI interface Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180702102721.3546-5-heiko@sntech.de
2018-07-10dt-bindings: Add Innolux P097PFG panel bindingsLin Huang
The Innolux P097PFG panel is 9.7" panel with 1536X2048 resolution, it reuse P079ZCA panel driver, so improve p079ZCA dt-binding to support P097PFG. Changes in v2: - None Changes in v3: - None Changes in v4: - None Changes in v5: - use separate file for binding - keep power supplies as required Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180702102721.3546-4-heiko@sntech.de
2018-07-10drm/panel: p079zca: Add variable unprepare_delay propertiesLin Huang
When panel power down, p079zca need delay between reset and disable power supply, but p097pfg does not need it. Similarly p097zca needs a delay after entering panel sleep mode. So add two delay properties, so we can meet these two panel power down sequence. Signed-off-by: Lin Huang <hl@rock-chips.com> [add sleep-mode delay] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180702102721.3546-3-heiko@sntech.de
2018-07-10drm/panel: p079zca: Refactor panel driver to support multiple panelsLin Huang
Refactor Innolux P079ZCA panel driver, let it support multi panels from Innolux that share similar power sequences. Panels may require different power supplies so use regulator bulk interfaces and define per panel supply-names. Changes in v2: - Change regulator property name to meet the panel datasheet Changes in v3: - this patch only refactor P079ZCA panel to support multi panel, support P097PFG panel in another patch Changes in v4: - Modify the patch which suggest by Thierry Changes in v5: - use regulator_bulk to handle different supply number Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180702102721.3546-2-heiko@sntech.de
2018-07-10drm/panel: ili9881c: Fix missing assignment to error return retColin Ian King
Currently, ret is being checked for an error condition however it is not being assigned in the previous statement on the call of function mipi_dsi_dcs_exit_sleep_mode. Add in the missing assignment of ret. Detected by CoverityScan, CID#1470174, 1470178 ("Unchecked return value") Fixes: 26aec25593c2 ("drm/panel: Add Ilitek ILI9881c panel driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626160354.1363-1-colin.king@canonical.com
2018-07-10drm/panel: simple: Add support for DataImage SCF0700C48GGU18Michal Vokáč
This adds support for the DataImage SCF0700C48GGU18 7.0" WVGA (800x480) TFT LCD panel. The panel has 24-bit parallel interface and can be supported by the simple panel driver. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1529930490-11874-2-git-send-email-michal.vokac@ysoft.com
2018-07-10dt-bindings: Add DataImage, Inc. vendor prefixMichal Vokáč
DataImage is a Taiwan-based manufacturer of LCD panels. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1529930490-11874-1-git-send-email-michal.vokac@ysoft.com
2018-07-10drm/panel: simple: Add support for Innolux G070Y2-L01Christoph Fritz
This patch adds support for Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1528111008.2818.20.camel@googlemail.com
2018-07-10drm/panel: simple: Add newhaven, nhd-4.3-480272ef-atxl LCDTomi Valkeinen
Add support for newhaven,nhd-4.3-480272ef-atxl to panel-simple. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180618132242.8673-8-tomi.valkeinen@ti.com
2018-07-10drm: Add support for extracting sync signal drive edge from videomodePeter Ujfalusi
The sync in some panels needs to be driven by different edge of the pixel clock compared to data. This is reflected by the DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in videmode flags. Add similar similar definitions for bus_flags and convert the sync drive edge via drm_bus_flags_from_videomode(). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180618132242.8673-2-tomi.valkeinen@ti.com
2018-07-10drm/panel: simple: Add support for BOE HV070WSA-100 panel to simple-panelAndrzej Hajda
The patch adds support for BOE HV070WSA-100 WSVGA 7.01 inch panel to the panel-simple driver. The panel is used in Exynos5250-arndale boards. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1529396370-18761-6-git-send-email-m.purski@samsung.com
2018-07-10dt-bindings: display: Add DT bindings for BOE HV070WSA-100 panelAndrzej Hajda
The patch adds bindings to BOE HV070-WSA WSVGA panel. Bindings are compatible with simple panel bindings. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Maciej Purski <m.purski@samsung.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1529396370-18761-5-git-send-email-m.purski@samsung.com
2018-07-10drm/vc4: Support the case where the DSI device is disabledBoris Brezillon
Having a device with a status property != "okay" in the DT is a valid use case, and we should not prevent the registration of the DRM device when the DSI device connected to the DSI controller is disabled. Consider the ENODEV return code as a valid result and do not expose the DSI encoder/connector when it happens. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-5-boris.brezillon@bootlin.com
2018-07-10drm/of: Make drm_of_find_panel_or_bridge() fail when the device is disabledBoris Brezillon
There's no point searching for a drm_bridge or drm_panel if the OF node we're pointing has a status property that is not "okay" or "ok". Just return -ENODEV in this case. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-4-boris.brezillon@bootlin.com
2018-07-10drm/panel: Let of_drm_find_panel() return -ENODEV when the panel is disabledBoris Brezillon
DT nodes might be present in the DT but with a status property set to "disabled" or "fail". In this case, we should not return -EPROBE_DEFER when the caller asks for a drm_panel instance. Return -ENODEV instead. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-3-boris.brezillon@bootlin.com
2018-07-10drm/panel: Make of_drm_find_panel() return an ERR_PTR() instead of NULLBoris Brezillon
Right now, the DRM panel logic returns NULL when a panel pointing to the passed OF node is not present in the list of registered panels. Most drivers interpret this NULL value as -EPROBE_DEFER, but we are about to modify the semantic of of_drm_find_panel() and let the framework return -ENODEV when the device node we're pointing to has a status property that is not equal to "okay" or "ok". Let's first patch the of_drm_find_panel() implementation to return ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace the '!panel' check by an 'IS_ERR(panel)' one. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-2-boris.brezillon@bootlin.com
2018-07-10drm/panel: simple: Add DLC DLC0700YZG-1 panelPhilipp Zabel
This patch adds support for DLC DLC0700YZG-1 1024x600 LVDS panels to the simple-panel driver. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> [m.felsch@pengutronix.de: fix typo in compatible dt-binding] [m.felsch@pengutronix.de: add property bindings] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180523092504.5142-3-m.felsch@pengutronix.de
2018-07-10dt-bindings: Add vendor prefix for DLC Display Co., Ltd.Philipp Zabel
DLC provides a wide range of display solutions. Website: http://www.dlcdisplay.com/ Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180523092504.5142-2-m.felsch@pengutronix.de
2018-07-10drm/panel: Add support for the EDT ETM0700G0EDH6Jan Tuerk
The Emerging Display Technology ETM0700G0EDH6 is the uses the same panel as the ETM0700G0BDH6. It differs in the hardware design for the backlight and the touchscreen i2c interface. As the new display type has different requirements for drive-strengths on the i2c-bus, add an additional compatible to allow the handling of it or warn about incompatible cpu and display combinations. Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180619095546.24445-3-jan.tuerk@emtrion.com
2018-07-10drm/panel: Add support for the EDT ETM0700G0BDH6Jan Tuerk
The Emerging Display Technology ETM0700G0BDH6 is exactly the same display as the ETM0700G0DH6, exept the pixelclock polarity. Therefore re-use the ETM0700G0DH6 modes. It is used by default on emtrion Avari based development kits. Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180619095546.24445-2-jan.tuerk@emtrion.com
2018-07-10dt-bindings: display: Document the EDT et* displays in one file.Jan Tuerk
Document the Emerging Display Technology Corp. (EDT) using the simple-panel binding in one single file. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180619095546.24445-1-jan.tuerk@emtrion.com
2018-07-10drm/panel: simple: Add support for Rocktech RK070ER9427 LCD panelJagan Teki
This adds support for the Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel, which can be supported by the simple panel driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180607134648.2902-1-jagan@amarulasolutions.com
2018-07-10driver core: Partially revert "driver core: correct device's shutdown order"Rafael J. Wysocki
Commit 52cdbdd49853 (driver core: correct device's shutdown order) introduced a regression by breaking device shutdown on some systems. Namely, the devices_kset_move_last() call in really_probe() added by that commit is a mistake as it may cause parents to follow children in the devices_kset list which then causes shutdown to fail. For example, if a device has children before really_probe() is called for it (which is not uncommon), that call will cause it to be reordered after the children in the devices_kset list and the ordering of that list will not reflect the correct device shutdown order any more. Also it causes the devices_kset list to be constantly reordered until all drivers have been probed which is totally pointless overhead in the majority of cases and it only covered an issue with system shutdown, while system-wide suspend/resume potentially had the same issue on the affected platforms (which was not covered). Moreover, the shutdown issue originally addressed by the change in really_probe() made by commit 52cdbdd49853 is not present in 4.18-rc any more, since dra7 started to use the sdhci-omap driver which doesn't disable any regulators during shutdown, so the really_probe() part of commit 52cdbdd49853 can be safely reverted. [The original issue was related to the omap_hsmmc driver used by dra7 previously.] For the above reasons, revert the really_probe() modifications made by commit 52cdbdd49853. The other code changes made by commit 52cdbdd49853 are useful and they need not be reverted. Fixes: 52cdbdd49853 (driver core: correct device's shutdown order) Link: https://lore.kernel.org/lkml/CAFgQCTt7VfqM=UyCnvNFxrSw8Z6cUtAi3HUwR4_xPAc03SgHjQ@mail.gmail.com/ Reported-by: Pingfan Liu <kernelfans@gmail.com> Tested-by: Pingfan Liu <kernelfans@gmail.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-10drm/i915: Unwind HW init after GVT setup failureChris Wilson
Following intel_gvt_init() failure, we missed unwinding our setup leaving pointers dangling past the module unload. For our example, the pm_qos: [ 441.057615] top: 000000006b3baf1c, n: 0000000054d8ef33, p: 0000000097cdf1a2 prev: 0000000054d8ef33, n: 0000000097cdf1a2, p: 000000006b3baf1c next: 0000000097cdf1a2, n: 000000006de8fc8b, p: 0000000081087253 [ 441.057627] WARNING: CPU: 4 PID: 9277 at lib/plist.c:42 plist_check_prev_next+0x2d/0x40 [ 441.057628] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core e1000e snd_pcm mei_me mei prime_numbers [last unloaded: i915] [ 441.057652] CPU: 4 PID: 9277 Comm: drv_selftest Tainted: G U 4.18.0-rc4-CI-CI_DRM_4464+ #1 [ 441.057653] Hardware name: System manufacturer System Product Name/Z170 PRO GAMING, BIOS 3402 04/26/2017 [ 441.057656] RIP: 0010:plist_check_prev_next+0x2d/0x40 [ 441.057657] Code: 08 48 39 f0 74 2b 49 89 f0 48 8b 4f 08 50 ff 32 52 48 89 fe 41 ff 70 08 48 8b 17 48 c7 c7 d8 ae 14 82 4d 8b 08 e8 63 0e 76 ff <0f> 0b 48 83 c4 20 c3 48 39 10 75 d0 f3 c3 0f 1f 44 00 00 41 54 55 [ 441.057717] RSP: 0018:ffffc900003a3a68 EFLAGS: 00010082 [ 441.057720] RAX: 0000000000000000 RBX: ffff8802193978c0 RCX: 0000000000000002 [ 441.057721] RDX: 0000000080000002 RSI: ffffffff820c65a4 RDI: 00000000ffffffff [ 441.057722] RBP: ffff8802193978c0 R08: 0000000000000000 R09: 0000000000000001 [ 441.057724] R10: ffffc900003a3a70 R11: 0000000000000000 R12: ffffffff82243de0 [ 441.057725] R13: ffffffff82243de0 R14: ffff88021a6c78c0 R15: 0000000077359400 [ 441.057726] FS: 00007fc23a4a9980(0000) GS:ffff880236d00000(0000) knlGS:0000000000000000 [ 441.057728] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 441.057729] CR2: 0000563e4503d038 CR3: 0000000138f86005 CR4: 00000000003606e0 [ 441.057730] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 441.057731] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 441.057732] Call Trace: [ 441.057736] plist_check_list+0x2e/0x40 [ 441.057738] plist_add+0x23/0x130 [ 441.057743] pm_qos_update_target+0x1bd/0x2f0 [ 441.057771] i915_driver_load+0xec4/0x1060 [i915] [ 441.057775] ? trace_hardirqs_on_caller+0xe0/0x1b0 [ 441.057800] i915_pci_probe+0x29/0x90 [i915] [ 441.057804] pci_device_probe+0xa1/0x130 [ 441.057807] driver_probe_device+0x306/0x480 [ 441.057810] __driver_attach+0xdb/0x100 [ 441.057812] ? driver_probe_device+0x480/0x480 [ 441.057813] ? driver_probe_device+0x480/0x480 [ 441.057816] bus_for_each_dev+0x74/0xc0 [ 441.057819] bus_add_driver+0x15f/0x250 [ 441.057821] ? 0xffffffffa0696000 [ 441.057823] driver_register+0x56/0xe0 [ 441.057825] ? 0xffffffffa0696000 [ 441.057827] do_one_initcall+0x58/0x370 [ 441.057830] ? do_init_module+0x1d/0x1ea [ 441.057832] ? rcu_read_lock_sched_held+0x6f/0x80 [ 441.057834] ? kmem_cache_alloc_trace+0x282/0x2e0 [ 441.057838] do_init_module+0x56/0x1ea [ 441.057841] load_module+0x2435/0x2b20 [ 441.057852] ? __se_sys_finit_module+0xd3/0xf0 [ 441.057854] __se_sys_finit_module+0xd3/0xf0 [ 441.057861] do_syscall_64+0x55/0x190 [ 441.057863] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 441.057865] RIP: 0033:0x7fc239d75839 [ 441.057866] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 [ 441.057927] RSP: 002b:00007fffb7825d38 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 441.057930] RAX: ffffffffffffffda RBX: 0000563e45035dd0 RCX: 00007fc239d75839 [ 441.057931] RDX: 0000000000000000 RSI: 0000563e4502f8a0 RDI: 0000000000000004 [ 441.057932] RBP: 0000563e4502f8a0 R08: 0000000000000004 R09: 0000000000000000 [ 441.057933] R10: 00007fffb7825ea0 R11: 0000000000000246 R12: 0000000000000000 [ 441.057934] R13: 0000563e4502f690 R14: 0000000000000000 R15: 000000000000003f [ 441.057940] irq event stamp: 231338 [ 441.057943] hardirqs last enabled at (231337): [<ffffffff8193e3fc>] _raw_spin_unlock_irqrestore+0x4c/0x60 [ 441.057944] hardirqs last disabled at (231338): [<ffffffff8193e26d>] _raw_spin_lock_irqsave+0xd/0x50 [ 441.057947] softirqs last enabled at (231024): [<ffffffff81c0034f>] __do_softirq+0x34f/0x505 [ 441.057949] softirqs last disabled at (231005): [<ffffffff8108c7b9>] irq_exit+0xa9/0xc0 [ 441.057951] WARNING: CPU: 4 PID: 9277 at lib/plist.c:42 plist_check_prev_next+0x2d/0x40 v2: Add a load failure point to intel_gvt_init() so that we always exercise this path in future. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107129 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180710143821.1889-1-chris@chris-wilson.co.uk
2018-07-10bpf: fix ldx in ld_abs rewrite for large offsetsDaniel Borkmann
Mark reported that syzkaller triggered a KASAN detected slab-out-of-bounds bug in ___bpf_prog_run() with a BPF_LD | BPF_ABS word load at offset 0x8001. After further investigation it became clear that the issue was the BPF_LDX_MEM() which takes offset as an argument whereas it cannot encode larger than S16_MAX offsets into it. For this synthetical case we need to move the full address into tmp register instead and do the LDX without immediate value. Fixes: e0cea7ce988c ("bpf: implement ld_abs/ld_ind in native bpf") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-10drm/i915: Cleanup modesetting on load-error pathChris Wilson
After handling a critical failure initialising GEM we need to unwind the modesetting setup. Testcase: igt/drv_module_reload/basic-reload-inject Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180710094421.16223-2-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.auld@intel.com>
2018-07-10drm/i915: Flush the residual parking on emergency shutdownChris Wilson
On unwinding following a critical failure inside GEM init, we also need to be sure to flush the workers before unloading the module. Testcase: igt/drv_module_reload/basic-reload-inject Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180710094421.16223-1-chris@chris-wilson.co.uk
2018-07-10drm/cma-helper: Remove drm_fb_cma_fbdev_init_with_funcs()Noralf Trønnes
Remove drm_fb_cma_fbdev_init_with_funcs(), its only user tinydrm has moved to drm_fbdev_generic_setup(). Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-9-noralf@tronnes.org
2018-07-10drm/tinydrm: Use drm_fbdev_generic_setup()Noralf Trønnes
Make full use of the generic fbdev client. Cc: David Lechner <david@lechnology.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-8-noralf@tronnes.org
2018-07-10drm/fb-helper: Finish the generic fbdev emulationNoralf Trønnes
This adds a drm_fbdev_generic_setup() function that sets up generic fbdev emulation with client callbacks for restore, hotplug and unregister. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-7-noralf@tronnes.org
2018-07-10drm/debugfs: Add internal client debugfs fileNoralf Trønnes
Print the names of the internal clients currently attached. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-6-noralf@tronnes.org
2018-07-10drm/cma-helper: Use the generic fbdev emulationNoralf Trønnes
This switches the CMA helper drivers that use its fbdev emulation over to the generic fbdev emulation. It's the first phase of using generic fbdev. A later phase will use DRM client callbacks for the lastclose/hotplug/remove callbacks. There are currently 2 fbdev init/fini functions: - drm_fb_cma_fbdev_init/drm_fb_cma_fbdev_fini - drm_fbdev_cma_init/drm_fbdev_cma_fini This is because the work on generic fbdev came up during a fbdev refactoring and thus wasn't completed. No point in completing that refactoring when drivers will soon move to drm_fb_helper_generic_probe(). tinydrm uses drm_fb_cma_fbdev_init_with_funcs(). Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-5-noralf@tronnes.org
2018-07-10drm/pl111: Set .gem_prime_vmap and .gem_prime_mmapNoralf Trønnes
These are needed for pl111 to use the generic fbdev emulation. Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-4-noralf@tronnes.org
2018-07-10drm/fb-helper: Add generic fbdev emulation .fb_probe functionNoralf Trønnes
This is the first step in getting generic fbdev emulation. A drm_fb_helper_funcs.fb_probe function is added which uses the DRM client API to get a framebuffer backed by a dumb buffer. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-3-noralf@tronnes.org
2018-07-10drm: Begin an API for in-kernel clientsNoralf Trønnes
This the beginning of an API for in-kernel clients. First out is a way to get a framebuffer backed by a dumb buffer. Only GEM drivers are supported. The original idea of using an exported dma-buf was dropped because it also creates an anonomous file descriptor which doesn't work when the buffer is created from a kernel thread. The easy way out is to use drm_driver.gem_prime_vmap to get the virtual address, which requires a GEM object. This excludes the vmwgfx driver which is the only non-GEM driver apart from the legacy ones. A solution for vmwgfx will have to be worked out later if it wants to support the client API which it probably will when we have a bootsplash client. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-2-noralf@tronnes.org
2018-07-10drm/i915: Tidy i915_gem_suspend()Chris Wilson
In the next patch, we will make a fairly minor change to flush outstanding resets before suspend. In order to keep churn to a minimum in that functional patch, we fix up the comments and coding style now. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709130208.11730-7-chris@chris-wilson.co.uk
2018-07-10drm/i915: Only reset hangcheck at the start of an activity cycleChris Wilson
Across a reset, the seqno (and thus hangcheck) should restart and the hangcheck naturally progress, for when it does not, we want to declare an emergency. Currently, we only detect if reset and reinit fails, but we do not detect if the call to reinit succeeds but the HW is fried - as we are resetting hangcheck on initialisation the engine. Remove that and rely on the natural progress to reset the hangcheck timer. References: e21b141376f9 ("drm/i915: Mark the hangcheck as idle when unparking the engines") References: 1fd00c0faeec ("drm/i915: Declare the driver wedged if hangcheck makes no progress") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709130208.11730-2-chris@chris-wilson.co.uk
2018-07-10Revert "arm64: Use aarch64elf and aarch64elfb emulation mode variants"Laura Abbott
This reverts commit 38fc4248677552ce35efc09902fdcb06b61d7ef9. Distributions such as Fedora and Debian do not package the ELF linker scripts with their toolchains, resulting in kernel build failures such as: | CHK include/generated/compile.h | LD [M] arch/arm64/crypto/sha512-ce.o | aarch64-linux-gnu-ld: cannot open linker script file ldscripts/aarch64elf.xr: No such file or directory | make[1]: *** [scripts/Makefile.build:530: arch/arm64/crypto/sha512-ce.o] Error 1 | make: *** [Makefile:1029: arch/arm64/crypto] Error 2 Revert back to the linux targets for now, adding a comment to the Makefile so we don't accidentally break this in the future. Cc: Paul Kocialkowski <contact@paulk.fr> Cc: <stable@vger.kernel.org> Fixes: 38fc42486775 ("arm64: Use aarch64elf and aarch64elfb emulation mode variants") Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-10drm/i915/selftests: Filter out both physical address swizzlesChris Wilson
In our swizzling selftests, we cannot predict the physical address of the target page (at least not simply!) and so skip bit17 swizzles. However, there are two bit17 swizzle modes and we only skipped one, with the second being observed on the lab gdg causing the test to fail, as soon as we hit a page with bit17 set in its address. Testcase: igt/drv_selftest/live_objects #gdg Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709194915.5789-1-chris@chris-wilson.co.uk
2018-07-10drm/i915/selftests: Constrain mock_gtt tests to fit within RAMChris Wilson
Be pessimistic and presume that we actually allocate every page we exercise via the mock_gtt (e.g. for gvt). In which case we have to keep our working set under the available physical memory to prevent oom. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180710080424.7821-1-chris@chris-wilson.co.uk
2018-07-10drm/i915: Remove function details from device error messagesChris Wilson
Error messages are intended to be addressed to the user; be clear, succinct, instructive and unambiguous. Adding the function name to that message does not add any information the user requires and in the process makes the message less clear. E.g. [ 245.539711] i915 0000:00:02.0: [drm:i915_gem_init [i915]] Failed to initialize GPU, declaring it wedged! becomes [ 245.539711] i915 0000:00:02.0: Failed to initialize GPU, declaring it wedged! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709134858.12446-1-chris@chris-wilson.co.uk
2018-07-10samples/bpf: Fix tc and ip paths in xdp2skb_meta.shTaeung Song
The below path error can occur: # ./xdp2skb_meta.sh --dev eth0 --list ./xdp2skb_meta.sh: line 61: /usr/sbin/tc: No such file or directory So just use command names instead of absolute paths of tc and ip. In addition, it allow callers to redefine $TC and $IP paths Fixes: 36e04a2d78d9 ("samples/bpf: xdp2skb_meta shows transferring info from XDP to SKB") Reviewed-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-10ext4: fix inline data updates with checksums enabledTheodore Ts'o
The inline data code was updating the raw inode directly; this is problematic since if metadata checksums are enabled, ext4_mark_inode_dirty() must be called to update the inode's checksum. In addition, the jbd2 layer requires that get_write_access() be called before the metadata buffer is modified. Fix both of these problems. https://bugzilla.kernel.org/show_bug.cgi?id=200443 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2018-07-10char: amd64-agp: Use 64-bit arithmetic instead of 32-bitGustavo A. R. Silva
Cast *tmp* and *nb_base* to u64 in order to give the compiler complete information about the proper arithmetic to use. Notice that such variables are used in contexts that expect expressions of type u64 (64 bits, unsigned) and the following expressions are currently being evaluated using 32-bit arithmetic: tmp << 25 nb_base << 25 Addresses-Coverity-ID: 200586 ("Unintentional integer overflow") Addresses-Coverity-ID: 200587 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-10char: agp: Change return type to vm_fault_tSouptick Joarder
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Ref-> commit 1c8f422059ae ("mm: change return type to vm_fault_t") was added in 4.17-rc1 to introduce the new typedef vm_fault_t. Currently we are making change to all drivers to return vm_fault_t for page fault handlers. As part of that char/agp driver is also getting changed to return vm_fault_t type from fault handler. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-10drm/i915/gvt: declare gvt as i915's soft dependencyHang Yuan
This helps initramfs builder and other tools to know the full dependencies of i915 and have gvt module loaded with i915. v2: add condition and change to pre-dependency (Chris) v3: move declaration to gvt.c. (Chris) v4: remove xengt (Zhenyu) Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-07-10Merge tag 'vmwgfx-next-4.19-3' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-next This introduces a header update and support for multisample surfaces. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/d020efb8-776d-5e8f-9d9f-122591e074d6@vmware.com
2018-07-10Merge tag 'vmwgfx-next-4.19-2' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-next A series of cleanups / reorganizations and modesetting changes that mostly target atomic state validation. [airlied: conflicts with SPDX stuff in amdgpu tree] Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1a88485e-e509-b00e-8485-19194f074115@vmware.com
2018-07-10MAINTAINERS: update drm treeDaniel Vetter
Mail to dri-devel went out, linux-next was updated, but we forgot this one here. Cc: David Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706072842.9009-1-daniel.vetter@ffwll.ch
2018-07-10Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next More features for 4.19: - Use core pcie functionality rather than duplicating our own for pcie gens and lanes - Scheduler function naming cleanups - More documentation - Reworked DC/Powerplay interfaces to improve power savings - Initial stutter mode support for RV (power feature) - Vega12 powerplay updates - GFXOFF fixes - Misc fixes Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705221447.2807-1-alexander.deucher@amd.com
generated by cgit (git 2.34.1) at 2025-09-15 01:11:57 +0000