summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-13Merge branch 'fix-DCTCP-delayed-ACK'David S. Miller
Yuchung Cheng says: ==================== fix DCTCP delayed ACK This patch series addresses the issue that sometimes DCTCP fail to acknowledge the latest sequence and result in sender timeout if inflight is small. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-13tcp: remove DELAYED ACK events in DCTCPYuchung Cheng
After fixing the way DCTCP tracking delayed ACKs, the delayed-ACK related callbacks are no longer needed Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-13tcp: fix dctcp delayed ACK scheduleYuchung Cheng
Previously, when a data segment was sent an ACK was piggybacked on the data segment without generating a CA_EVENT_NON_DELAYED_ACK event to notify congestion control modules. So the DCTCP ca->delayed_ack_reserved flag could incorrectly stay set when in fact there were no delayed ACKs being reserved. This could result in sending a special ECN notification ACK that carries an older ACK sequence, when in fact there was no need for such an ACK. DCTCP keeps track of the delayed ACK status with its own separate state ca->delayed_ack_reserved. Previously it may accidentally cancel the delayed ACK without updating this field upon sending a special ACK that carries a older ACK sequence. This inconsistency would lead to DCTCP receiver never acknowledging the latest data until the sender times out and retry in some cases. Packetdrill script (provided by Larry Brakmo) 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < [ect0] SEW 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> 0.100 > SE. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 8> 0.110 < [ect0] . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 0.200 < [ect0] . 1:1001(1000) ack 1 win 257 0.200 > [ect01] . 1:1(0) ack 1001 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 1:2(1) ack 1001 0.200 < [ect0] . 1001:2001(1000) ack 2 win 257 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 2:3(1) ack 2001 0.200 < [ect0] . 2001:3001(1000) ack 3 win 257 0.200 < [ect0] . 3001:4001(1000) ack 3 win 257 0.200 > [ect01] . 3:3(0) ack 4001 0.210 < [ce] P. 4001:4501(500) ack 3 win 257 +0.001 read(4, ..., 4500) = 4500 +0 write(4, ..., 1) = 1 +0 > [ect01] PE. 3:4(1) ack 4501 +0.010 < [ect0] W. 4501:5501(1000) ack 4 win 257 // Previously the ACK sequence below would be 4501, causing a long RTO +0.040~+0.045 > [ect01] . 4:4(0) ack 5501 // delayed ack +0.311 < [ect0] . 5501:6501(1000) ack 4 win 257 // More data +0 > [ect01] . 4:4(0) ack 6501 // now acks everything +0.500 < F. 9501:9501(0) ack 4 win 257 Reported-by: Larry Brakmo <brakmo@fb.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-13qlogic: check kstrtoul() for errorsDan Carpenter
We accidentally left out the error handling for kstrtoul(). Fixes: a520030e326a ("qlcnic: Implement flash sysfs callback for 83xx adapter") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-13net: ethtool: fix spelling mistake: "tubale" -> "tunable"Michael Heimpold
Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-13Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - I2C core bugfix regarding bus recovery - driver bugfix for the tegra driver - typo correction * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: recovery: if possible send STOP with recovery pulses i2c: tegra: Fix NACK error handling i2c: stu300: use non-archaic spelling of failes
2018-07-13drm/i915/execlists: Drop clear_gtiir() on GPU resetChris Wilson
With the new CSB processing code, we are not vulnerable to delayed delivery of a pre-reset interrupt as we use the CSB status pointers in the HWSP to decide if we need to parse any CSB events and no longer need to wait for the first post-reset interrupt to be assured that the CSB mmio registers are valid. The new icl code to clear registers has a nasty lock inversion: [ 57.409776] ====================================================== [ 57.409779] WARNING: possible circular locking dependency detected [ 57.409783] 4.18.0-rc4-CI-CI_DII_1137+ #1 Tainted: G U W [ 57.409785] ------------------------------------------------------ [ 57.409788] swapper/6/0 is trying to acquire lock: [ 57.409790] 000000004f304ee5 (&engine->timeline.lock/1){-.-.}, at: execlists_submit_request+0x2b/0x1a0 [i915] [ 57.409841] but task is already holding lock: [ 57.409844] 00000000aad89594 (&(&rq->lock)->rlock#2){-.-.}, at: notify_ring+0x2b2/0x480 [i915] [ 57.409869] which lock already depends on the new lock. [ 57.409872] the existing dependency chain (in reverse order) is: [ 57.409876] -> #2 (&(&rq->lock)->rlock#2){-.-.}: [ 57.409900] notify_ring+0x2b2/0x480 [i915] [ 57.409922] gen8_cs_irq_handler+0x39/0xa0 [i915] [ 57.409943] gen11_irq_handler+0x2f0/0x420 [i915] [ 57.409949] __handle_irq_event_percpu+0x42/0x370 [ 57.409952] handle_irq_event_percpu+0x2b/0x70 [ 57.409956] handle_irq_event+0x2f/0x50 [ 57.409959] handle_edge_irq+0xe7/0x190 [ 57.409964] handle_irq+0x67/0x160 [ 57.409967] do_IRQ+0x5e/0x120 [ 57.409971] ret_from_intr+0x0/0x1d [ 57.409974] _raw_spin_unlock_irqrestore+0x4e/0x60 [ 57.409979] tasklet_action_common.isra.5+0x47/0xb0 [ 57.409982] __do_softirq+0xd9/0x505 [ 57.409985] irq_exit+0xa9/0xc0 [ 57.409988] do_IRQ+0x9a/0x120 [ 57.409991] ret_from_intr+0x0/0x1d [ 57.409995] cpuidle_enter_state+0xac/0x360 [ 57.409999] do_idle+0x1f3/0x250 [ 57.410004] cpu_startup_entry+0x6a/0x70 [ 57.410010] start_secondary+0x19d/0x1f0 [ 57.410015] secondary_startup_64+0xa5/0xb0 [ 57.410018] -> #1 (&(&dev_priv->irq_lock)->rlock){-.-.}: [ 57.410081] clear_gtiir+0x30/0x200 [i915] [ 57.410116] execlists_reset+0x6e/0x2b0 [i915] [ 57.410140] i915_reset_engine+0x111/0x190 [i915] [ 57.410165] i915_handle_error+0x11a/0x4a0 [i915] [ 57.410198] i915_hangcheck_elapsed+0x378/0x530 [i915] [ 57.410204] process_one_work+0x248/0x6c0 [ 57.410207] worker_thread+0x37/0x380 [ 57.410211] kthread+0x119/0x130 [ 57.410215] ret_from_fork+0x3a/0x50 [ 57.410217] -> #0 (&engine->timeline.lock/1){-.-.}: [ 57.410224] _raw_spin_lock_irqsave+0x33/0x50 [ 57.410256] execlists_submit_request+0x2b/0x1a0 [i915] [ 57.410289] submit_notify+0x8d/0x124 [i915] [ 57.410314] __i915_sw_fence_complete+0x81/0x250 [i915] [ 57.410339] dma_i915_sw_fence_wake+0xd/0x20 [i915] [ 57.410344] dma_fence_signal_locked+0x79/0x200 [ 57.410368] notify_ring+0x2ba/0x480 [i915] [ 57.410392] gen8_cs_irq_handler+0x39/0xa0 [i915] [ 57.410416] gen11_irq_handler+0x2f0/0x420 [i915] [ 57.410421] __handle_irq_event_percpu+0x42/0x370 [ 57.410425] handle_irq_event_percpu+0x2b/0x70 [ 57.410428] handle_irq_event+0x2f/0x50 [ 57.410432] handle_edge_irq+0xe7/0x190 [ 57.410436] handle_irq+0x67/0x160 [ 57.410439] do_IRQ+0x5e/0x120 [ 57.410445] ret_from_intr+0x0/0x1d [ 57.410449] cpuidle_enter_state+0xac/0x360 [ 57.410453] do_idle+0x1f3/0x250 [ 57.410456] cpu_startup_entry+0x6a/0x70 [ 57.410460] start_secondary+0x19d/0x1f0 [ 57.410464] secondary_startup_64+0xa5/0xb0 [ 57.410466] other info that might help us debug this: [ 57.410471] Chain exists of: &engine->timeline.lock/1 --> &(&dev_priv->irq_lock)->rlock --> &(&rq->lock)->rlock#2 [ 57.410481] Possible unsafe locking scenario: [ 57.410485] CPU0 CPU1 [ 57.410487] ---- ---- [ 57.410490] lock(&(&rq->lock)->rlock#2); [ 57.410494] lock(&(&dev_priv->irq_lock)->rlock); [ 57.410498] lock(&(&rq->lock)->rlock#2); [ 57.410503] lock(&engine->timeline.lock/1); [ 57.410506] *** DEADLOCK *** [ 57.410511] 4 locks held by swapper/6/0: [ 57.410514] #0: 0000000074575789 (&(&dev_priv->irq_lock)->rlock){-.-.}, at: gen11_irq_handler+0x8a/0x420 [i915] [ 57.410542] #1: 000000009b29b30e (rcu_read_lock){....}, at: notify_ring+0x1a/0x480 [i915] [ 57.410573] #2: 00000000aad89594 (&(&rq->lock)->rlock#2){-.-.}, at: notify_ring+0x2b2/0x480 [i915] [ 57.410601] #3: 000000009b29b30e (rcu_read_lock){....}, at: submit_notify+0x35/0x124 [i915] [ 57.410635] stack backtrace: [ 57.410640] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G U W 4.18.0-rc4-CI-CI_DII_1137+ #1 [ 57.410644] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP, BIOS ICLSFWR1.R00.2222.A01.1805300339 05/30/2018 [ 57.410650] Call Trace: [ 57.410652] <IRQ> [ 57.410657] dump_stack+0x67/0x9b [ 57.410662] print_circular_bug.isra.16+0x1c8/0x2b0 [ 57.410666] __lock_acquire+0x1897/0x1b50 [ 57.410671] ? lock_acquire+0xa6/0x210 [ 57.410674] lock_acquire+0xa6/0x210 [ 57.410706] ? execlists_submit_request+0x2b/0x1a0 [i915] [ 57.410711] _raw_spin_lock_irqsave+0x33/0x50 [ 57.410741] ? execlists_submit_request+0x2b/0x1a0 [i915] [ 57.410769] execlists_submit_request+0x2b/0x1a0 [i915] [ 57.410774] ? _raw_spin_unlock_irqrestore+0x39/0x60 [ 57.410804] submit_notify+0x8d/0x124 [i915] [ 57.410828] __i915_sw_fence_complete+0x81/0x250 [i915] [ 57.410854] dma_i915_sw_fence_wake+0xd/0x20 [i915] [ 57.410858] dma_fence_signal_locked+0x79/0x200 [ 57.410882] notify_ring+0x2ba/0x480 [i915] [ 57.410907] gen8_cs_irq_handler+0x39/0xa0 [i915] [ 57.410933] gen11_irq_handler+0x2f0/0x420 [i915] [ 57.410938] __handle_irq_event_percpu+0x42/0x370 [ 57.410943] handle_irq_event_percpu+0x2b/0x70 [ 57.410947] handle_irq_event+0x2f/0x50 [ 57.410951] handle_edge_irq+0xe7/0x190 [ 57.410955] handle_irq+0x67/0x160 [ 57.410958] do_IRQ+0x5e/0x120 [ 57.410962] common_interrupt+0xf/0xf [ 57.410965] </IRQ> [ 57.410969] RIP: 0010:cpuidle_enter_state+0xac/0x360 [ 57.410972] Code: 44 00 00 31 ff e8 84 93 91 ff 45 84 f6 74 12 9c 58 f6 c4 02 0f 85 31 02 00 00 31 ff e8 7d 30 98 ff e8 e8 0e 94 ff fb 4c 29 fb <48> ba cf f7 53 e3 a5 9b c4 20 48 89 d8 48 c1 fb 3f 48 f7 ea b8 ff [ 57.411015] RSP: 0018:ffffc90000133e90 EFLAGS: 00000216 ORIG_RAX: ffffffffffffffdd [ 57.411023] RAX: ffff8804ae748040 RBX: 000000000002a97d RCX: 0000000000000000 [ 57.411029] RDX: 0000000000000046 RSI: ffffffff82141263 RDI: ffffffff820f05a7 [ 57.411035] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 [ 57.411041] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff8229f078 [ 57.411045] R13: ffff8804ab2adfa8 R14: 0000000000000000 R15: 0000000d5de092e3 [ 57.411052] do_idle+0x1f3/0x250 [ 57.411055] cpu_startup_entry+0x6a/0x70 [ 57.411059] start_secondary+0x19d/0x1f0 [ 57.411064] secondary_startup_64+0xa5/0xb0 The easiest remedy is to remove the defunct code. Fixes: ff047a87cfac ("drm/i915/icl: Correctly clear lost ctx-switch interrupts across reset for Gen11") References: fd8526e50902 ("drm/i915/execlists: Trust the CSB") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180713203529.1973-3-chris@chris-wilson.co.uk
2018-07-13drm/i915: Do not short-circuit tasklets during resetChris Wilson
Inside intel_engine_is_idle(), we flush the tasklet to ensure that is being run in a timely fashion (ksoftirqd has taught us to expect the worst). However, if we are in the middle of reset, the HW may not yet be ready to execute the submission tasklet and so we must respect the disable flag. Fixes: dd0cf235d81f ("drm/i915: Speed up idle detection by kicking the tasklets") Testcase: igt/drv_selftest/live_hangcheck Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180713203529.1973-2-chris@chris-wilson.co.uk
2018-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-07-13 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix AF_XDP TX error reporting before final kernel release such that it becomes consistent between copy mode and zero-copy, from Magnus. 2) Fix three different syzkaller reported issues: oob due to ld_abs rewrite with too large offset, another oob in l3 based skb test run and a bug leaving mangled prog in subprog JITing error path, from Daniel. 3) Fix BTF handling for bitfield extraction on big endian, from Okash. 4) Fix a missing linux/errno.h include in cgroup/BPF found by kbuild bot, from Roman. 5) Fix xdp2skb_meta.sh sample by using just command names instead of absolute paths for tc and ip and allow them to be redefined, from Taeung. 6) Fix availability probing for BPF seg6 helpers before final kernel ships so they can be detected at prog load time, from Mathieu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-13drm/i915/selftests: Include the start of each subtest in the GEM traceChris Wilson
Knowing the boundary of each subtest can be instrumental in digesting the voluminous trace output and finding the critical piece of information. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180713203529.1973-1-chris@chris-wilson.co.uk
2018-07-13skbuff: Unconditionally copy pfmemalloc in __skb_clone()Stefano Brivio
Commit 8b7008620b84 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") introduced a different handling for the pfmemalloc flag in copy and clone paths. In __skb_clone(), now, the flag is set only if it was set in the original skb, but not cleared if it wasn't. This is wrong and might lead to socket buffers being flagged with pfmemalloc even if the skb data wasn't allocated from pfmemalloc reserves. Copy the flag instead of ORing it. Reported-by: Sabrina Dubroca <sd@queasysnail.net> Fixes: 8b7008620b84 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Tested-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-13Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "A clocksource driver fix and a revert" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: arm_arch_timer: Set arch_mem_timer cpumask to cpu_possible_mask Revert "tick: Prefer a lower rating device only if it's CPU local device"
2018-07-13Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tool fixes from Ingo Molnar: "Misc tooling fixes: python3 related fixes, gcc8 fix, bashism fixes and some other smaller fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Use python-config --includes rather than --cflags perf script python: Fix dict reference counting perf stat: Fix --interval_clear option perf tools: Fix compilation errors on gcc8 perf test shell: Prevent temporary editor files from being considered test scripts perf llvm-utils: Remove bashism from kernel include fetch script perf test shell: Make perf's inet_pton test more portable perf test shell: Replace '|&' with '2>&1 |' to work with more shells perf scripts python: Add Python 3 support to EventClass.py perf scripts python: Add Python 3 support to sched-migration.py perf scripts python: Add Python 3 support to Util.py perf scripts python: Add Python 3 support to SchedGui.py perf scripts python: Add Python 3 support to Core.py perf tools: Generate a Python script compatible with Python 2 and 3
2018-07-13Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fix from Ingo Molnar: "Fix a UEFI mixed mode (64-bit kernel on 32-bit UEFI) reboot loop regression" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Fix mixed mode reboot loop by removing pointless call to PciIo->Attributes()
2018-07-13drm/amdkfd: Enable Raven for KFDYong Zhao
Add DID and kfd_device_info for Raven. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-07-13drm/amdkfd: Optimize out some duplicated code in kfd_signal_iommu_event()Yong Zhao
memory_exception_data is already initialized for not-present faults. It only needs to be overridden for permission faults. Signed-off-by: Yong Zhao <yong.zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-07-13drm/amdkfd: Workaround to accommodate Raven too many PPR issueYong Zhao
On Raven multiple PPRs can be queued up by the hardware. When the first of those requests is handled by the IOMMU driver, the memory access succeeds. After that the application may be done with the memory and unmap it. At that point the page table entries are invalidated, but there are still outstanding duplicate PPRs for those addresses. When the IOMMU driver processes those duplicate requests, it finds invalid page table entries and triggers an invalid PPR fault. As a workaround, don't signal invalid PPR faults on Raven to avoid segfaulting applications that haven't done anything wrong. As a side effect, real GPU memory access faults may go unnoticed by the application. Signed-off-by: Yong Zhao <yong.zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-07-13drm/amdkfd: Avoid flooding dmesg on Raven due to IOMMU issuesYong Zhao
On Raven Invalid PPRs (peripheral page requests) can be reported because multiple PPRs can be still queued when memory is freed. Apply a rate limit to avoid flooding the log in this case. Signed-off-by: Yong Zhao <yong.zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-07-13drm/amdkfd: Make SDMA engine number an ASIC-dependent variableYong Zhao
On Raven there is only one SDMA engine instead of previously assumed two, so we need to adapt our code to this new scenario. Signed-off-by: Yong Zhao <yong.zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-07-13drm/amdkfd: Consolidate duplicate memory banks info in topologyYong Zhao
If there are several memory banks that has the same properties in CRAT, we aggregate them into one memory bank. This cleans up memory banks on APUs (e.g. Raven) where the CRAT reports each memory channel as a separate bank. This only confuses user mode, which only deals with virtual memory. Signed-off-by: Yong Zhao <yong.zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-07-13drm/amdgpu/pp/smu7: cache smu firmware tocAlex Deucher
Rather than calculating it everytime we rebuild the toc buffer, calculate it once initially and then just copy the cached results to the vram buffer. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amdgpu/pp/smu7: remove local mc_addr variableAlex Deucher
use the structure member directly. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amdgpu/pp/smu7: drop unused values in smu data structureAlex Deucher
use kaddr directly rather than secondary variable. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amdgpu/pp/smu7: use a local variable for toc indexingAlex Deucher
Rather than using the index variable stored in vram. If the device fails to come back online after a resume cycle, reads from vram will return all 1s which will cause a segfault. Based on a patch from Thomas Martitz <kugel@rockbox.org>. This avoids the segfault, but we still need to sort out why the GPU does not come back online after a resume. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105760 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amdgpu/vi: fix mixed up state in smu clockgating setupAlex Deucher
Use the PP_STATE_SUPPORT_* rather than AMD_CG_SUPPORT_* when communicating with the SMU. Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: properly turn autocal offDmytro Laktyushkin
[why] Currently we do not turn off autocal when scaling is in bypass. In case vbios enalbes auto scale and our first mode set is a non-scaled mode we have autocal on causing screen corruption. [how] moves turning autocal off to be first thing done during scaler setup Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: Initialize data structure for DalMpVisualConfirm.Hugo Hu
[Why] Prevent unexpected color shows if DalMpVisualConfirm enable. [How] Zero out color configuration data for DalMpVisualConfirm when initiating. Signed-off-by: Hugo Hu <hugo.hu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: dal 3.1.55Tony Cheng
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: update dml to match DV dmlDmytro Laktyushkin
DV updated their dml with an option to use max vstartup, this updates dc dml with the same option Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: add max scl ratio to soc bounding boxDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: Fix new stream count check in dc_add_stream_to_ctxKen Chalmers
[Why] The previous code could allow through attempts to enable more streams than there are timing generators, in designs where the number of pipes is greater than the number of timing generators. [How] Compare the new stream count to the resource pool's timing generator count, instead of its pipe count. Also correct a typo in the error message. Signed-off-by: Ken Chalmers <ken.chalmers@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: dp debugfs allow link rate lane count greater than dp rx ↵Hersen Wu
reported caps [Why] when hw team does phy parameters tuning, there is need to force dp link rate or lane count grater than the values from dp receiver to check dp tx. current debufs limit link rate, lane count no more than rx caps. [How] remove force settings less than rx caps check v2: Fix typo in title Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: Expose couple OPTC functions through headerDavid Francis
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: Add CRC support for DCNDavid Francis
[Why] Regamma/CTM tests require CRC support [How] The CRC registers that were used in DCE exist under different names in DCN. The code was copied from DCE (in dc/dce110/dce110_timing_generator.c) into DCN, and changed to use the DCN register access helper functions. Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: Return out_link_loss from interrupt handlerFatemeh Darbehani
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: Add NULL check for local sink in edp_power_controlYue Hin Lau
[WHY] PNP cause bsod regression fix [HOW] Add NULL check Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Hugo Hu <Hugo.Hu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: add pp to dc powerlevel enum translatorMikita Lipski
[why] Add a switch statement to translate pp's powerlevel enum to dc powerlevel statement enum [how] Add a translator function Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: add DalEnableHDMI20 key supportCharlene Liu
[why] "DalEnableHDMI20" set to 0, disallow HDMI YCbCr420 and pixel clock > 340Mhz Default is enabled. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: introduce concept of send_reset_length for i2c enginesCharlene Liu
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: Read AUX channel even if only status byte is returnedLeo (Sunpeng) Li
[Why] get_channel_status() can return 0 in returned_bytes, and report a successful operation result. This is because it prunes the first status byte out. This was preventing read_channel_reply() from being called (due to the faulty condition), and consequently preventing the AUX reply status from being set. [How] Fix the conditional so that it accounts for when get_channel_status() returns 0 bytes read. [Fixes] Fixes possible edid read failures during S3 resume, where we are now relying on DRM's DP AUX handling. This was an regression introduced by: Author: Harry Wentland <harry.wentland@amd.com> drm/amd/display: Return aux replies directly to DRM Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: Right shift AUX reply value sooner than laterLeo (Sunpeng) Li
[Why] There is no point in keeping the AUX reply value in the raw format as returned from reading the AUX_SW_DATA register. [How] Shift it within read_channel_reply(), where the register is read, before returning it. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull rseq fixes from Ingo Molnar: "Various rseq ABI fixes and cleanups: use get_user()/put_user(), validate parameters and use proper uapi types, etc" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq/selftests: cleanup: Update comment above rseq_prepare_unload rseq: Remove unused types_32_64.h uapi header rseq: uapi: Declare rseq_cs field as union, update includes rseq: uapi: Update uapi comments rseq: Use get_user/put_user rather than __get_user/__put_user rseq: Use __u64 for rseq_cs fields, validate user inputs
2018-07-13drm/amd/display: Expose bunch of functions from dcn10_hw_sequencerEric Bernstein
v2: Remove spurious newline changes Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: Add YCbCr420 only support for HDMI 4K@60Jerry (Fangzhi) Zuo
[Why] Some monitors mark 4K@60 capable HDMI port only have 300MHz TMDS maximum, but the edid includes 4K@60 mode in cea extension block. [How] To enable 4K@60, need to limit BW by allowing YCbCr420 ONLY mode. Add YCbCr420 only support for monitors that do not fully support HDMI2.0, e.g., ASUS PA328. The YCbCr420 only support applies to DCN, DCE112 or higher. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: dal 3.1.54Tony Cheng
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: Linux hook test pattern through debufsHersen Wu
bug fix: phy test PLTAT is special 80bit test pattern. The 80bit data should be hard coded within driver so that user does not need input the deata. previous driver does not have hard coded 80 bits pattern data for PLTPAT. Other than this PLTPAT, user has to input 80 bits pattern data. In case user input less than 10 bytes data, un-input data byte will be filled by 0x00. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: expose dcn10_aux_initialize in headerYongqiang Sun
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: add dcn cursor hotsport rotation and mirror supportDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: set default GPIO_ID_HPDCharlene Liu
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: add missing mask for dcnCharlene Liu
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Duke Du <Duke.Du@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-13 23:15:57 +0000