| Age | Commit message (Collapse) | Author |
|---|
|
Correct the range of PCIe app-reg region from 0x2000 to 0x4000 refer to
SerDes_SS memory map of i.MX95 Rerference Manual.
Fixes: 3b1d5deb29ff ("arm64: dts: imx95: add pcie[0,1] and pcie-ep[0,1] support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Commit 255fbd9eabe7 ("arm64: dts: imx8mp: Add optional nominal drive
mode DTSI") added imx8mp-nominal.dtsi, which overrides all overdrive
clock rates in imx8mp.dtsi to the nominal rates.
At the same time, commit 9f7595b3e5ae ("arm64: dts: imx8mp: configure
GPU and NPU clocks to overdrive rate") went in, which changed some
clock rates away from the nominal values.
Resolve the discrepancy by effectively reverting the changes in the
latter commit inside imx8mp-nominal.dtsi. This is required for proper
operation of the imx8mp-skov boards, which are currently
imx8mp-nominal.dtsi's only users and lets all other boards that don't
include it benefit from the new higher frequencies.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Use kvzalloc() so that large exit_dump buffer allocations don't fail
easily
- Remove cpu.weight / cpu.idle unimplemented warnings which are more
annoying than helpful.
This makes SCX_OPS_HAS_CGROUP_WEIGHT unnecessary. Mark it for
deprecation
* tag 'sched_ext-for-6.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Mark SCX_OPS_HAS_CGROUP_WEIGHT for deprecation
sched_ext: Remove cpu.weight / cpu.idle unimplemented warnings
sched_ext: Use kvzalloc for large exit_dump allocation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix compilation in CONFIG_LOCKDEP && !CONFIG_PROVE_RCU configurations
- Allow "cpuset_v2_mode" mount option for "cpuset" filesystem type to
make life easier for android
* tag 'cgroup-for-6.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset-v1: Add missing support for cpuset_v2_mode
cgroup: Fix compilation issue due to cgroup_mutex not being exported
|
|
Vladimir Oltean says:
====================
ENETC bug fixes for bpf_xdp_adjust_head() and bpf_xdp_adjust_tail()
It has been reported that on the ENETC driver, bpf_xdp_adjust_head()
and bpf_xdp_adjust_tail() are broken in combination with the XDP_PASS
verdict. I have constructed a series a simple XDP programs and tested
with various packet sizes and confirmed that this is the case.
Patch 3/3 fixes the core issue, which is that the sk_buff created on
XDP_PASS is created by the driver as if XDP never ran, but in fact the
geometry needs to be adjusted according to the delta applied by the
program on the original xdp_buff. It depends on commit 539c1fba1ac7
("xdp: add generic xdp_build_skb_from_buff()") which is not available in
"stable" but perhaps should be.
Patch 2/3 is a small refactor necessary for 3/3.
Patch 1/3 fixes a related issue I noticed, which is that
bpf_xdp_adjust_tail() with a positive offset works for linear XDP
buffers, but returns an error for non-linear ones, even if there is
plenty of space in the final page fragment.
====================
Link: https://patch.msgid.link/20250417120005.3288549-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vlatko Markovikj reported that XDP programs attached to ENETC do not
work well if they use bpf_xdp_adjust_head() or bpf_xdp_adjust_tail(),
combined with the XDP_PASS verdict. A typical use case is to add or
remove a VLAN tag.
The resulting sk_buff passed to the stack is corrupted, because the
algorithm used by the driver for XDP_PASS is to unwind the current
buffer pointer in the RX ring and to re-process the current frame with
enetc_build_skb() as if XDP hadn't run. That is incorrect because XDP
may have modified the geometry of the buffer, which we then are
completely unaware of. We are looking at a modified buffer with the
original geometry.
The initial reaction, both from me and from Vlatko, was to shop around
the kernel for code to steal that would calculate a delta between the
old and the new XDP buffer geometry, and apply that to the sk_buff too.
We noticed that veth and generic xdp have such code.
The headroom adjustment is pretty uncontroversial, but what turned out
severely problematic is the tailroom.
veth has this snippet:
__skb_put(skb, off); /* positive on grow, negative on shrink */
which on first sight looks decent enough, except __skb_put() takes an
"unsigned int" for the second argument, and the arithmetic seems to only
work correctly by coincidence. Second issue, __skb_put() contains a
SKB_LINEAR_ASSERT(). It's not a great pattern to make more widespread.
The skb may still be nonlinear at that point - it only becomes linear
later when resetting skb->data_len to zero.
To avoid the above, bpf_prog_run_generic_xdp() does this instead:
skb_set_tail_pointer(skb, xdp->data_end - xdp->data);
skb->len += off; /* positive on grow, negative on shrink */
which is more open-coded, uses lower-level functions and is in general a
bit too much to spread around in driver code.
Then there is the snippet:
if (xdp_buff_has_frags(xdp))
skb->data_len = skb_shinfo(skb)->xdp_frags_size;
else
skb->data_len = 0;
One would have expected __pskb_trim() to be the function of choice for
this task. But it's not used in veth/xdpgeneric because the extraneous
fragments were _already_ freed by bpf_xdp_adjust_tail() ->
bpf_xdp_frags_shrink_tail() -> ... -> __xdp_return() - the backing
memory for the skb frags and the xdp frags is the same, but they don't
keep individual references.
In fact, that is the biggest reason why this snippet cannot be reused
as-is, because ENETC temporarily constructs an skb with the original len
and the original number of frags. Because the extraneous frags are
already freed by bpf_xdp_adjust_tail() and returned to the page
allocator, it means the entire approach of using enetc_build_skb() is
questionable for XDP_PASS. To avoid that, one would need to elevate the
page refcount of all frags before calling bpf_prog_run_xdp() and drop it
after XDP_PASS.
There are other things that are missing in ENETC's handling of XDP_PASS,
like for example updating skb_shinfo(skb)->meta_len.
These are all handled correctly and cleanly in commit 539c1fba1ac7
("xdp: add generic xdp_build_skb_from_buff()"), added to net-next in
Dec 2024, and in addition might even be quicker that way. I have a very
strong preference towards backporting that commit for "stable", and that
is what is used to fix the handling bugs. It is way too messy to go
this deep into the guts of an sk_buff from the code of a device driver.
Fixes: d1b15102dd16 ("net: enetc: add support for XDP_DROP and XDP_PASS")
Reported-by: Vlatko Markovikj <vlatko.markovikj@etas.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250417120005.3288549-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This small snippet of code ensures that we do something with the array
of RX software buffer descriptor elements after passing the skb to the
stack. In this case, we see if the other half of the page is reusable,
and if so, we "turn around" the buffers, making them directly usable by
enetc_refill_rx_ring() without going to enetc_new_page().
We will need to perform this kind of buffer flipping from a new code
path, i.e. from XDP_PASS. Currently, enetc_build_skb() does it there
buffer by buffer, but in a subsequent change we will stop using
enetc_build_skb() for XDP_PASS.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250417120005.3288549-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At the time when bpf_xdp_adjust_tail() gained support for non-linear
buffers, ENETC was already generating this kind of geometry on RX, due
to its use of 2K half page buffers. Frames larger than 1472 bytes
(without FCS) are stored as multi-buffer, presenting a need for multi
buffer support to work properly even in standard MTU circumstances.
Allow bpf_xdp_frags_increase_tail() to know the allocation size of paged
data, so it can safely permit growing the tailroom of the buffer from
XDP programs.
Fixes: bf25146a5595 ("bpf: add frags support to the bpf_xdp_adjust_tail() API")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250417120005.3288549-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function xdp_convert_buff_to_frame() may return NULL if it fails
to correctly convert the XDP buffer into an XDP frame due to memory
constraints, internal errors, or invalid data. Failing to check for NULL
may lead to a NULL pointer dereference if the result is used later in
processing, potentially causing crashes, data corruption, or undefined
behavior.
On XDP redirect failure, the associated page must be released explicitly
if it was previously retained via get_page(). Failing to do so may result
in a memory leak, as the pages reference count is not decremented.
Cc: stable@vger.kernel.org # v5.9+
Fixes: 6c5aa6fc4def ("xen networking: add basic XDP support for xen-netfront")
Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru>
Link: https://patch.msgid.link/20250417122118.1009824-1-sdl@nppct.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-04-17
We've added 12 non-merge commits during the last 9 day(s) which contain
a total of 18 files changed, 1748 insertions(+), 19 deletions(-).
The main changes are:
1) bpf qdisc support, from Amery Hung.
A qdisc can be implemented in bpf struct_ops programs and
can be used the same as other existing qdiscs in the
"tc qdisc" command.
2) Add xsk tail adjustment tests, from Tushar Vyavahare.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Test attaching bpf qdisc to mq and non root
selftests/bpf: Add a bpf fq qdisc to selftest
selftests/bpf: Add a basic fifo qdisc test
libbpf: Support creating and destroying qdisc
bpf: net_sched: Disable attaching bpf qdisc to non root
bpf: net_sched: Support updating bstats
bpf: net_sched: Add a qdisc watchdog timer
bpf: net_sched: Add basic bpf qdisc kfuncs
bpf: net_sched: Support implementation of Qdisc_ops in bpf
bpf: Prepare to reuse get_ctx_arg_idx
selftests/xsk: Add tail adjustment tests and support check
selftests/xsk: Add packet stream replacement function
====================
Link: https://patch.msgid.link/20250417184338.3152168-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Michael Chan says:
====================
bnxt_en: Update for net-next
The first patch changes the FW message timeout threshold for a warning
message. The second patch adjusts the ethtool -w coredump length to
suppress a warning. The last 2 patches are small cleanup patches for
the bnxt_ulp RoCE auxbus code.
v1: https://lore.kernel.org/netdev/20250415174818.1088646-1-michael.chan@broadcom.com/
====================
Link: https://patch.msgid.link/20250417172448.1206107-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BNXT_ROCE_ULP and BNXT_MAX_ULP are no longer used. Remove them to
clean up the code.
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250417172448.1206107-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "ref_count" field in struct bnxt_ulp is unused after
commit a43c26fa2e6c ("RDMA/bnxt_re: Remove the sriov config callback").
So we can just remove it now.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250417172448.1206107-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethtool first calls .get_dump_flags() to get the dump length. For
coredump, the driver calls the FW to get the coredump length (L1). The
min. of L1 and the user specified length is then passed to
.get_dump_data() (L2) to get the coredump. The actual coredump length
retrieved by the FW (L3) during .get_dump_data() may be smaller than L1.
This length discrepancy will trigger a WARN_ON() in
ethtool_get_dump_data().
ethtool has already vzalloc'ed a buffer with size L1. Just report
the coredump length as L2 even though the actual coredump length L3
may be smaller. The extra zero padding does not matter. This will
prevent the warning that may alarm the user.
For correctness, only do the final length update if there is no error.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250417172448.1206107-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The firmware advertises a "hwrm_cmd_max_timeout" value to the driver
for NVRAM and coredump related functions that can take tens of seconds
to complete. The driver polls for the operation to complete under
mutex and may trigger hung task watchdog warning if the wait is too long.
To warn the user about this, the driver currently prints a warning if
this advertised value exceeds 40 seconds:
Device requests max timeout of %d seconds, may trigger hung task watchdog
Initially, we chose 40 seconds, well below the kernel's default
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT (120 seconds) to avoid triggering
the hung task watchdog. But 60 seconds is the timeout on most
production FW and cannot be reduced further. Change the driver's warning
threshold to 60 seconds to avoid triggering this warning on all
production devices. We also print the warning if the value exceeds
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT which may be set to architecture
specific defaults as low as 10 seconds.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250417172448.1206107-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
net: stmmac: socfpga: fix init ordering and cleanups
This series fixes the init ordering of the socfpga probe function.
The standard rule is to do all setup before publishing any device,
and socfpga violates that. I can see no reason for this, but these
patches have not been tested on hardware.
Address this by moving the initialisation of dwmac->stmmac_rst
along with all the other dwmac initialisers - there's no reason
for this to be late as plat_dat->stmmac_rst has already been
populated.
Next, replace the call to ops->set_phy_mode() with an init function
socfpga_dwmac_init() which will then be linked in to plat_dat->init.
Then, add this to plat_dat->init, and switch to stmmac_pltfr_pm_ops
from the private ops. The runtime suspend/resume socfpga implementations
are identical to the platform ones, but misses the noirq versions
which this will add.
Before we swap the order of socfpga_dwmac_init() and
stmmac_dvr_probe(), we need to change the way the interface is
obtained, as that uses driver data and the struct net_device which
haven't been initialised. Save a pointer to plat_dat in the socfpga
private data, and use that to get the interface mode. We can then swap
the order of the init and probe functions.
Finally, convert to devm_stmmac_pltfr_probe() by moving the call
to ops->set_phy_mode() into an init function appropriately populating
plat_dat->init.
====================
Link: https://patch.msgid.link/aAE2tKlImhwKySq_@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert socfpga to use devm_stmmac_pltfr_probe() to further simplify
the probe function, wrapping the call to the set_phy_mode() method
into socfpga_dwmac_init() which can be called from the plat_dat->init()
method. Also call this from socfpga_dwmac_resume() thereby simplifying
that function.
Using the devm variant also means we can remove the call to
stmmac_pltfr_remove().
Unfortunately, we can't also convert to stmmac_pltfr_pm_ops as there is
extra work done in socfpga_dwmac_resume().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1u5Sns-001IJw-OY@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Initialisation/setup after registration is a bug. This is the second
of two patches fixing this in socfpga.
The set_phy_mode() functions do various hardware setup that would
interfere with a netdev that has been published, and thus available to
be opened by the kernel/userspace.
However, set_phy_mode() relies upon the netdev having been initialised
to get at the plat_stmmacenet_data structure, which is probably why it
was placed after stmmac_drv_probe(). We can remove that need by storing
a pointer to struct plat_stmmacenet_data in struct socfpga_dwmac.
Move the call to set_phy_mode() before calling stmmac_dvr_probe().
This also simplifies the probe function as there is no need to
unregister the netdev if set_phy_mode() fails.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1u5Snn-001IJq-L0@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert socfpga to use the generic stmmac_pltfr_pm_ops, which can be
achieved by adding an appropriate plat_dat->init function to do the
setup.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1u5Sni-001IJk-Gi@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both the resume and probe path needs to configure the phy mode, so
provide a common function to do this which can later be hooked into
plat_dat->init.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1u5Snd-001IJe-Cx@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Initialisation/setup after registration is a bug. This is the first of
two patches fixing this in socfpga.
dwmac->stmmac_rst is initialised from the stmmac plat_dat's stmmac_rst
member, which is itself initialised by devm_stmmac_probe_config_dt().
Therefore, this can be initialised before we call stmmac_dvr_probe().
Move it there.
dwmac->stmmac_rst is used by the set_phy_mode() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1u5SnY-001IJY-90@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao says:
====================
net: Adopting nlmsg_payload() (final series)
This patchset marks the final step in converting users to the new
nlmsg_payload() function. It addresses the last two files that were not
converted in previous series, specifically updating the following
functions:
neigh_valid_dump_req
rtnl_valid_dump_ifinfo_req
rtnl_valid_getlink_req
valid_fdb_get_strict
valid_bridge_getlink_req
rtnl_valid_stats_req
rtnl_mdb_valid_dump_req
I would like to extend a big thank you to Kuniyuki Iwashima for his
invaluable help and review of this effort.
====================
Link: https://patch.msgid.link/20250417-nlmsg_v3-v1-0-9b09d9d7e61d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250417-nlmsg_v3-v1-2-9b09d9d7e61d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Leverage the new nlmsg_payload() helper to avoid checking for message
size and then reading the nlmsg data.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250417-nlmsg_v3-v1-1-9b09d9d7e61d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC 14.2.0 reports that passing a non-string literal as the
format argument of dev_set_name() is potentially insecure.
drivers/s390/net/ism_drv.c: In function 'ism_probe':
drivers/s390/net/ism_drv.c:615:2: warning: format not a string literal and no format arguments [-Wformat-security]
615 | dev_set_name(&ism->dev, dev_name(&pdev->dev));
| ^~~~~~~~~~~~
It seems to me that as pdev is a PCIE device then the dev_name
call above should always return the device's BDF, e.g. 00:12.0.
That this should not contain format escape sequences. And thus
the current usage is safe.
But, it seems better to be safe than sorry. And, as a bonus, compiler
output becomes less verbose by addressing this issue.
Compile tested only.
No functional change intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250417-ism-str-fmt-v1-1-9818b029874d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simon Horman says:
====================
MAINTAINERS: Update entries for s390 network driver files
Update the entries for s390 network driver files to:
* Add include/linux/ism.h to MAINTAINERS
* Add s390 network driver files to the NETWORKING DRIVERS section
This is to aid developers, and tooling such as get_maintainer.pl alike
to CC patches to all the appropriate people and mailing lists. And is
in keeping with an ongoing effort for NETWORKING entries in MAINTAINERS
to more accurately reflect the way code is maintained.
====================
Link: https://patch.msgid.link/20250417-ism-maint-v1-0-b001be8545ce@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These files are already correctly covered by the S390 NETWORKING DRIVERS
section. In practice commits for these drivers feed into the Networking
subsystem. So it seems appropriate to also list them under NETWORKING
DRIVERS.
This aids developers, and tooling such as get_maintainer.pl
alike to CC patches to all the appropriate people and mailing lists.
And is in keeping with an ongoing effort for NETWORKING entries
in MAINTAINERS to more accurately reflect the way code is maintained.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250417-ism-maint-v1-2-b001be8545ce@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ism.h appears to be part of s390 networking drivers
so add it to the corresponding section in MAINTAINERS.
This aids developers, and tooling such as get_maintainer.pl
alike to CC patches to the appropriate people and mailing lists.
And is in keeping with an ongoing effort for NETWORKING entries
in MAINTAINERS to more accurately reflect the way code is maintained.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250417-ism-maint-v1-1-b001be8545ce@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure event logs are only generated when the debug logging level
MPI3_DEBUG_EVENT is enabled. This prevents unnecessary logging.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250415101546.204018-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add a NULL check for the returned hwq pointer by ufshcd_mcq_req_to_hwq().
This is similar to the fix in commit 74736103fb41 ("scsi: ufs: core: Fix
ufshcd_abort_one racing issue").
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250412195909.315418-1-chenyuan0y@gmail.com
Fixes: ab248643d3d6 ("scsi: ufs: core: Add error handling for MCQ mode")
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commands that have not been completed with scsi_done() do not clear the
SCMD_INITIALIZED flag and therefore will not be properly reinitialized.
Thus, the next time the scsi_cmnd structure is used, the command may
fail in scsi_cmd_runtime_exceeded() due to the old jiffies_at_alloc
value:
kernel: sd 16:0:1:84: [sdts] tag#405 timing out command, waited 720s
kernel: sd 16:0:1:84: [sdts] tag#405 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=66636s
Clear flags for commands that have not been completed by SCSI.
Fixes: 4abafdc4360d ("block: remove the initialize_rq_fn blk_mq_ops method")
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Link: https://lore.kernel.org/r/20250324084933.15932-2-a.kovaleva@yadro.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The combined condition was left as is when we converted
from __dev_get_by_index() to netdev_get_by_index_lock().
There was no need to undo anything with the former, for
the latter we need an unlock.
Fixes: 1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations")
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250418015317.1954107-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'net-mlx5-fix-null-dereference-and-memory-leak-in-ttc_table-creation'
Henry Martin says:
====================
net/mlx5: Fix NULL dereference and memory leak in ttc_table creation
This patch series addresses two issues in the
mlx5_create_inner_ttc_table() and mlx5_create_ttc_table() functions:
1. A potential NULL pointer dereference if mlx5_get_flow_namespace()
returns NULL.
2. A memory leak in the error path when ttc_type is invalid (default:
switch case).
====================
Link: https://patch.msgid.link/20250418023814.71789-1-bsdhenrymartin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Relocate the memory allocation for ttc table after the switch statement
that validates params->ns_type in both mlx5_create_inner_ttc_table() and
mlx5_create_ttc_table(). This ensures memory is only allocated after
confirming valid input, eliminating potential memory leaks when invalid
ns_type cases occur.
Fixes: 137f3d50ad2a ("net/mlx5: Support matching on l4_type for ttc_table")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250418023814.71789-3-bsdhenrymartin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add NULL check for mlx5_get_flow_namespace() returns in
mlx5_create_inner_ttc_table() and mlx5_create_ttc_table() to prevent
NULL pointer dereference.
Fixes: 137f3d50ad2a ("net/mlx5: Support matching on l4_type for ttc_table")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250418023814.71789-2-bsdhenrymartin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a spelling mistake in a mlx5_core_dbg and two spelling mistakes
in comment blocks. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250418135703.542722-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a spelling mistake in a dev_error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250418112447.533746-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inode_operations.fileattr_(get|set) didn't exist when the various flag
ioctls where implemented - but they do now, which means we can delete a
bunch of ioctl code in favor of standard VFS level wrappers.
Closes: https://lore.kernel.org/linux-bcachefs/7ltgrgqgfummyrlvw7hnfhnu42rfiamoq3lpcvrjnlyytldmzp@yazbhusnztqn/
Cc: Petr Vorel <pvorel@suse.cz>
Cc: Andrea Cervesato <andrea.cervesato@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Various new families and my recent work on rtnetlink missed
adding dependencies on C headers. If the system headers are
up to date or don't include a given header at all this doesn't
make a difference. But if the system headers are in place but
stale - compilation will break.
Reported-by: Kory Maincent <kory.maincent@bootlin.com>
Fixes: 29d34a4d785b ("tools: ynl: generate code for rt-addr and add a sample")
Link: https://lore.kernel.org/20250418190431.69c10431@kmaincent-XPS-13-7390
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250418234942.2344036-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We had a buggy release of bcachefs-tools that wasn't properly aligning
bucket sizes.
We can't ask users to reformat - and it's easy to teach the allocator to
make sure writes are properly aligned.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, copygc and rebalance weren't started until the very end of
mounting, after all recvoery passes have finished.
But copygc really should be started earlier, since it may be needed for
allocations to make forward progress. Additionally, we've been seeing
occasional bug reports where starting the kthread fails due to a pending
signal - i.e. we're getting timed out by systemd (during a version
upgrade), but we're not seeing the signal until mount is about to
complete.
Additionally, we now have copygc/rebalance explicitly wait for
check_snapshots to complete (if being run); they require that for
snapshot_is_ancestor() in the data move path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Don't use a continue; this simplifies the next patch where
run_recovery_passes() will be responsible for waking up copygc and
rebalance at the appropriate time.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
According to CXL r3.2 section 8.2.1.2, the PCI_COMMAND register fields,
including Memory Space Enable bit, have no effect on the behavior of an
RCD Upstream Port. Retaining this check may incorrectly cause
cxl_pci_probe() to fail on a valid RCD upstream Port.
While the specification is explicit only for RCD Upstream Ports, this
check is solely for accessing the RCRB, which is always mapped through
memory space. Therefore, its safe to remove the check entirely. In
practice, firmware reliably enables the Memory Space Enable bit for
RCH Downstream Ports and no failures have been observed.
Removing the check simplifies the code and avoids unnecessary
special-casing, while relying on BIOS/firmware to configure devices
correctly. Moreover, any failures due to inaccessible RCRB regions
will still be caught either in __rcrb_to_component() or while
parsing the component register block.
The following failure was observed in dmesg when the check was present:
cxl_pci 0000:7f:00.0: No component registers (-6)
Fixes: d5b1a27143cb ("cxl/acpi: Extract component registers of restricted hosts from RCRB")
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/20250407192734.70631-1-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
The inclinometer channels were previously defined with 14 realbits.
However, the ADIS16201 datasheet states the resolution for these output
channels is 12 bits (Page 14, text description; Page 15, table 7).
Correct the realbits value to 12 to accurately reflect the hardware.
Fixes: f7fe1d1dd5a5 ("staging: iio: new adis16201 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250421131539.912966-1-gshahrouzi@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Fix register read/write routine as per datasheet.
When reading multiple consecutive registers, only the first one is read
properly. This is due to missing chip select deassert and assert again
between first and second 16bit transfer, as shown in the datasheet
AD7606C-16, rev 0, figure 110.
Fixes: f2a22e1e172f ("iio: adc: ad7606: Add support for software mode for ad7616")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250418-wip-bl-ad7606-fix-reg-access-v3-1-d5eeb440c738@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure the struct itself it also 8-byte aligned.
While touching this, convert struct mpr_chan to an anonymous struct
to consolidate the code a bit to make it easier for future readers.
Fixes: 713337d9143e ("iio: pressure: Honeywell mprls0025pa pressure sensor")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250418-iio-more-timestamp-alignment-v2-2-d6a5d2b1c9fe@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Align the buffers used with iio_push_to_buffers_with_timestamp() to
ensure the s64 timestamp is aligned to 8 bytes.
Fixes: bac4368fab62 ("iio: imu: adis16550: add adis16550 support")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250418-iio-more-timestamp-alignment-v2-1-d6a5d2b1c9fe@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
found with the new enumerated_ref code
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We've got some reports of this happening in the wild, and need a bit
more info to debug it:
https://github.com/koverstreet/bcachefs/issues/854
https://www.reddit.com/r/bcachefs/comments/1k28kjm/surprise_soft_lockup/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
