summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-04ipv4: route: Ignore output interface in FIB lookup for PMTU routeStefano Brivio
Currently, processes sending traffic to a local bridge with an encapsulation device as a port don't get ICMP errors if they exceed the PMTU of the encapsulated link. David Ahern suggested this as a hack, but it actually looks like the correct solution: when we update the PMTU for a given destination by means of updating or creating a route exception, the encapsulation might trigger this because of PMTU discovery happening either on the encapsulation device itself, or its lower layer. This happens on bridged encapsulations only. The output interface shouldn't matter, because we already have a valid destination. Drop the output interface restriction from the associated route lookup. For UDP tunnels, we will now have a route exception created for the encapsulation itself, with a MTU value reflecting its headroom, which allows a bridge forwarding IP packets originated locally to deliver errors back to the sending socket. The behaviour is now consistent with IPv6 and verified with selftests pmtu_ipv{4,6}_br_{geneve,vxlan}{4,6}_exception introduced later in this series. v2: - reset output interface only for bridge ports (David Ahern) - add and use netif_is_any_bridge_port() helper (David Ahern) Suggested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-04dm ebs: Fix incorrect checking for REQ_OP_FLUSHJohn Dorminy
REQ_OP_FLUSH was being treated as a flag, but the operation part of bio->bi_opf must be treated as a whole. Change to accessing the operation part via bio_op(bio) and checking for equality. Signed-off-by: John Dorminy <jdorminy@redhat.com> Acked-by: Heinz Mauelshagen <heinzm@redhat.com> Fixes: d3c7b35c20d60 ("dm: add emulated block size target") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-08-04Merge tag 'wireless-drivers-next-2020-08-04' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.9 Second set of patches for v5.9. mt76 has most of patches this time. Otherwise it's just smaller fixes and cleanups to other drivers. There was a major conflict in mt76 driver between wireless-drivers and wireless-drivers-next. I solved that by merging the former to the latter. Major changes: rtw88 * add support for ieee80211_ops::change_interface * add support for enabling and disabling beacon * add debugfs file for testing h2c mt76 * ARP filter offload for 7663 * runtime power management for 7663 * testmode support for mfg calibration * support for more channels ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-04via-velocity: Use more typical logging stylesJoe Perches
Use netdev_<level> in place of VELOCITY_PRT. Use pr_<level> in place of printk(KERN_<LEVEL>. Miscellanea: o Add pr_fmt to prefix pr_<level> output with "via-velocity: " o Remove now unused functions and macros o Realign some logging lines o Remove devname where pr_<level> is also used Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-04dm init: Set file local variable staticDamien Le Moal
Declare dm_allowed_targets as static to avoid the warning: drivers/md/dm-init.c:39:12: warning: symbol 'dm_allowed_targets' was not declared. Should it be static? when compiling with C=1. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-08-04dm ioctl: Fix compilation warningDamien Le Moal
In retrieve_status(), when copying the target type name in the target_type string field of struct dm_target_spec, copy at most DM_MAX_TYPE_NAME - 1 character to avoid the compilation warning: warning: ‘__builtin_strncpy’ specified bound 16 equals destination size [-Wstringop-truncation] when compiling with W-1. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-08-04dm raid: Remove empty if statementDamien Le Moal
In super_init_validation(), remove a body-less if statement testing only variables to avoid a compilation warning when compiling with W=1. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-08-04dm verity: Fix compilation warningDamien Le Moal
For the case !CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG, declare the functions verity_verify_root_hash(), verity_verify_is_sig_opt_arg(), verity_verify_sig_parse_opt_args() and verity_verify_sig_opts_cleanup() as inline to avoid a "no previous prototype for xxx" compilation warning when compiling with W=1. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-08-04Merge branch 'hinic-mailbox-channel-enhancement'David S. Miller
Luo bin says: ==================== hinic: mailbox channel enhancement add support to generate mailbox random id for VF to ensure that the mailbox message from VF is valid and PF should check whether the cmd from VF is supported before passing it to hw. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-04hinic: add check for mailbox msg from VFLuo bin
PF should check whether the cmd from VF is supported and its content is right before passing it to hw. Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-04hinic: add generating mailbox random index supportLuo bin
add support to generate mailbox random id of VF to ensure that mailbox messages PF received are from the correct VF. Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-04ALSA: hda/hdmi: Add quirk to force connectivityKai-Heng Feng
HDMI on some platforms doesn't enable audio support because its Port Connectivity [31:30] is set to AC_JACK_PORT_NONE: Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x58560010: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 3 0x02 0x03* 0x04 For now, use a quirk to force connectivity based on SSID. If there are more platforms affected by the same issue, we can eye for a more generic solution. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200804155836.16252-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-08-04PCI: Set bridge map_irq and swizzle_irq to default functionsRob Herring
The majority of DT based host drivers use the default .map_irq() and .swizzle_irq() functions, so let's initialize the function pointers to the default and drop setting them in the host drivers. Drivers like iProc which don't support legacy interrupts need to set .map_irq() back to NULL. Link: https://lore.kernel.org/r/20200722022514.1283916-20-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2020-08-04PCI: Move DT resource setup into devm_pci_alloc_host_bridge()Rob Herring
Now that pci_parse_request_of_pci_ranges() callers just setup pci_host_bridge.windows and dma_ranges directly and don't need the bus range returned, we can just initialize them when allocating the pci_host_bridge struct. With this, pci_parse_request_of_pci_ranges() becomes a static function. Link: https://lore.kernel.org/r/20200722022514.1283916-19-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2020-08-04PCI: rcar-gen2: Convert to use modern host bridge probe functionsRob Herring
The rcar-gen2 host driver still uses the old Arm PCI setup function pci_common_init_dev(). Let's update it to use the modern devm_pci_alloc_host_bridge(), pci_parse_request_of_pci_ranges() and pci_host_probe() functions. Link: https://lore.kernel.org/r/20200722022514.1283916-18-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-renesas-soc@vger.kernel.org
2020-08-04Merge branch 'for-5.9-console-return-codes' into for-linusPetr Mladek
2020-08-04parisc: make the log level string for register dumps constRolf Eike Beer
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Helge Deller <deller@gmx.de>
2020-08-04powerpc: Fix circular dependency between percpu.h and mmu.hMichael Ellerman
Recently random.h started including percpu.h (see commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity")), which broke corenet64_smp_defconfig: In file included from /linux/arch/powerpc/include/asm/paca.h:18, from /linux/arch/powerpc/include/asm/percpu.h:13, from /linux/include/linux/random.h:14, from /linux/lib/uuid.c:14: /linux/arch/powerpc/include/asm/mmu.h:139:22: error: unknown type name 'next_tlbcam_idx' 139 | DECLARE_PER_CPU(int, next_tlbcam_idx); This is due to a circular header dependency: asm/mmu.h includes asm/percpu.h, which includes asm/paca.h, which includes asm/mmu.h Which means DECLARE_PER_CPU() isn't defined when mmu.h needs it. We can fix it by moving the include of paca.h below the include of asm-generic/percpu.h. This moves the include of paca.h out of the #ifdef __powerpc64__, but that is OK because paca.h is almost entirely inside #ifdef CONFIG_PPC64 anyway. It also moves the include of paca.h out of the #ifdef CONFIG_SMP, which could possibly break something, but seems to have no ill effects. Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Cc: stable@vger.kernel.org # v5.8 Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200804130558.292328-1-mpe@ellerman.id.au
2020-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo
mt76 driver had major conflicts within mt7615 directory. To make it easier for every merge wireless-drivers to wireless-drivers-next and solve those conflicts.
2020-08-04Merge branch 'cpufreq/arm/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq driver changes for v5.9-rc1 from Viresh Kumar: "Here are the details: - Adaptive voltage scaling (AVS) support and minor cleanups for brcmstb driver (Florian Fainelli and Markus Mayer). - A new tegra driver and cleanup for the existing one (Sumit Gupta and Jon Hunter). - Bandwidth level support for Qcom driver along with OPP changes (Sibi Sankar). - Cleanups to sti, cpufreq-dt, ap806, CPPC drivers (Viresh Kumar, Lee Jones, Ivan Kokshaysky, Sven Auhagen, and Xin Hao). - Make schedutil default governor for ARM (Valentin Schneider). - Fix dependency issues for imx (Walter Lozano). - Cleanup around cached_resolved_idx in cpufreq core (Viresh Kumar)." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: make schedutil the default for arm and arm64 cpufreq: cached_resolved_idx can not be negative cpufreq: Add Tegra194 cpufreq driver dt-bindings: arm: Add NVIDIA Tegra194 CPU Complex binding cpufreq: imx: Select NVMEM_IMX_OCOTP cpufreq: sti-cpufreq: Fix some formatting and misspelling issues cpufreq: tegra186: Simplify probe return path cpufreq: CPPC: Reuse caps variable in few routines cpufreq: ap806: fix cpufreq driver needs ap cpu clk cpufreq: cppc: Reorder code and remove apply_hisi_workaround variable cpufreq: dt: fix oops on armada37xx cpufreq: brcmstb-avs-cpufreq: send S2_ENTER / S2_EXIT commands to AVS cpufreq: brcmstb-avs-cpufreq: Support polling AVS firmware cpufreq: brcmstb-avs-cpufreq: more flexible interface for __issue_avs_command() cpufreq: qcom: Disable fast switch when scaling DDR/L3 cpufreq: qcom: Update the bandwidth levels on frequency change OPP: Add and export helper to set bandwidth cpufreq: blacklist SC7180 in cpufreq-dt-platdev cpufreq: blacklist SDM845 in cpufreq-dt-platdev
2020-08-04cpufreq: intel_pstate: Fix cpuinfo_max_freq when MSR_TURBO_RATIO_LIMIT is 0Srinivas Pandruvada
The MSR_TURBO_RATIO_LIMIT can be 0. This is not an error. User can update this MSR via BIOS settings on some systems or can use msr tools to update. Also some systems boot with value = 0. This results in display of cpufreq/cpuinfo_max_freq wrong. This value will be equal to cpufreq/base_frequency, even though turbo is enabled. But platform will still function normally in HWP mode as we get max 1-core frequency from the MSR_HWP_CAPABILITIES. This MSR is already used to calculate cpu->pstate.turbo_freq, which is used for to set policy->cpuinfo.max_freq. But some other places cpu->pstate.turbo_pstate is used. For example to set policy->max. To fix this, also update cpu->pstate.turbo_pstate when updating cpu->pstate.turbo_freq. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-08-04PM: runtime: Improve kerneldoc of pm_runtime_get_if_active()Rafael J. Wysocki
The kerneldoc comment of pm_runtime_get_if_active() doesn't list the second argument of the function properly, so fix that and while at it clarify that comment somewhat and add some markup to it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2020-08-04PM: runtime: Add kerneldoc comments to multiple helpersRafael J. Wysocki
Add kerneldoc comments to multiple PM-runtime helper functions defined as static inline wrappers around lower-level routines to provide quick reference decumentation of their behavior. Some of them are similar to each other with subtle differences only and the behavior of some of them may appear as counter-intuitive, so clarify all that to avoid confusion. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2020-08-04thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH supportSumeet Pawnikar
Add LP (Low Power) PCH id for Cannon Lake (CNL) based platforms. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1596097503-27924-1-git-send-email-sumeet.r.pawnikar@intel.com
2020-08-04MAINTAINERS: enlist Greg formally for console stuffDaniel Vetter
I did a few greps for main console data structures, and there's a few places outside of drivers/video/console: - a braille driver - a sisusbvga driver - fbcon, but I think that's fine if we leave that officially under fbdev maintainership - lots of stuff in drivers/tty/vt, which is already under Greg's maintainership. So I think this match gives reasonably useful Cc: lists for the files and places I've tested. Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://lore.kernel.org/r/20200803141142.1606661-1-daniel.vetter@ffwll.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-04vgacon: Fix for missing check in scrollback handlingYunhai Zhang
vgacon_scrollback_update() always leaves enbough room in the scrollback buffer for the next call, but if the console size changed that room might not actually be enough, and so we need to re-check. The check should be in the loop since vgacon_scrollback_cur->tail is updated in the loop and count may be more than 1 when triggered by CSI M, as Jiri's PoC: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <fcntl.h> int main(int argc, char** argv) { int fd = open("/dev/tty1", O_RDWR); unsigned short size[3] = {25, 200, 0}; ioctl(fd, 0x5609, size); // VT_RESIZE write(fd, "\e[1;1H", 6); for (int i = 0; i < 30; i++) write(fd, "\e[10M", 5); } It leads to various crashes as vgacon_scrollback_update writes out of the buffer: BUG: unable to handle page fault for address: ffffc900001752a0 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:mutex_unlock+0x13/0x30 ... Call Trace: n_tty_write+0x1a0/0x4d0 tty_write+0x1a0/0x2e0 Or to KASAN reports: BUG: KASAN: slab-out-of-bounds in vgacon_scroll+0x57a/0x8ed This fixes CVE-2020-14331. Reported-by: 张云海 <zhangyunhai@nsfocus.com> Reported-by: Yang Yingliang <yangyingliang@huawei.com> Reported-by: Kyungtae Kim <kt0755@gmail.com> Fixes: 15bdab959c9b ([PATCH] vgacon: Add support for soft scrollback) Cc: stable@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Solar Designer <solar@openwall.com> Cc: "Srivatsa S. Bhat" <srivatsa@csail.mit.edu> Cc: Anthony Liguori <aliguori@amazon.com> Cc: Yang Yingliang <yangyingliang@huawei.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Yunhai Zhang <zhangyunhai@nsfocus.com> Link: https://lore.kernel.org/r/9fb43895-ca91-9b07-ebfd-808cf854ca95@nsfocus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-04MAINTAINERS: Update KVM/MIPS maintainersHuacai Chen
James Hogan has become inactive for a long time and leaves KVM for MIPS orphan. I'm working on KVM/Loongson and attempt to make it upstream both in kernel and QEMU, while Aleksandar Markovic is already a maintainer of QEMU/MIPS. We are both interested in QEMU/KVM/MIPS, and we have already made some contributions in kernel and QEMU. If possible, we want to take the KVM/MIPS maintainership. Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-08-04MIPS: Update default config file for Loongson-3Huacai Chen
Update Loongson-3's default config file: 1, Adjust NR_CPUS to 16; 2, Add a built-in cmdline "ieee754=relaxed"; 3, Enable MSA, CGROUPS, NAMESPACES, KVM, and XFS support; 4, Enable all possible virtio drivers to support KVM Host/Guest; 5, Enable all necessary netfilter modules to support virtual network; Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-08-04MIPS: KVM: Add kvm guest support for Loongson-3Huacai Chen
Loongson-3 KVM guest is based on virtio, it use liointc as its interrupt controller and use GPEX as the pci controller. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-08-04dt-bindings: mips: Document Loongson kvm guest boardHuacai Chen
Document loongson64v-4core-virtio, a virtio based kvm guest board for Loongson-3. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-08-03random32: move the pseudo-random 32-bit definitions to prandom.hLinus Torvalds
The addition of percpu.h to the list of includes in random.h revealed some circular dependencies on arm64 and possibly other platforms. This include was added solely for the pseudo-random definitions, which have nothing to do with the rest of the definitions in this file but are still there for legacy reasons. This patch moves the pseudo-random parts to linux/prandom.h and the percpu.h include with it, which is now guarded by _LINUX_PRANDOM_H and protected against recursive inclusion. A further cleanup step would be to remove this from <linux/random.h> entirely, and make people who use the prandom infrastructure include just the new header file. That's a bit of a churn patch, but grepping for "prandom_" and "next_pseudo_random32" "struct rnd_state" should catch most users. But it turns out that that nice cleanup step is fairly painful, because a _lot_ of code currently seems to depend on the implicit include of <linux/random.h>, which can currently come in a lot of ways, including such fairly core headfers as <linux/net.h>. So the "nice cleanup" part may or may never happen. Fixes: 1c9df907da83 ("random: fix circular include dependency on arm64 after addition of percpu.h") Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-04ALSA: usb-audio: add startech usb audio dock nameCurtis Malainey
The dock sold from startech (PID: ICUSBAUDIO7D) has no friendly name and shows up currently as "USB Sound Device" in ALSA. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20200804010616.3399256-1-cujomalainey@chromium.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-08-04xen/arm: call dma_to_phys on the dma_addr_t parameter of dma_cache_maintStefano Stabellini
dma_cache_maint is getting called passing a dma address which could be different from a physical address. Add a struct device* parameter to dma_cache_maint. Translate the dma_addr_t parameter of dma_cache_maint by calling dma_to_phys. Do it for the first page and all the following pages, in case of multipage handling. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-11-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04xen/arm: introduce phys/dma translations in xen_dma_sync_for_*Stefano Stabellini
xen_dma_sync_for_cpu, xen_dma_sync_for_device, xen_arch_need_swiotlb are getting called passing dma addresses. On some platforms dma addresses could be different from physical addresses. Before doing any operations on these addresses we need to convert them back to physical addresses using dma_to_phys. Move the arch_sync_dma_for_cpu and arch_sync_dma_for_device calls from xen_dma_sync_for_cpu/device to swiotlb-xen.c, and add a call dma_to_phys to do address translations there. dma_cache_maint is fixed by the next patch. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Acked-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20200710223427.6897-10-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04swiotlb-xen: introduce phys_to_dma/dma_to_phys translationsStefano Stabellini
With some devices physical addresses are different than dma addresses. To be able to deal with these cases, we need to call phys_to_dma on physical addresses (including machine addresses in Xen terminology) before returning them from xen_swiotlb_alloc_coherent and xen_swiotlb_map_page. We also need to convert dma addresses back to physical addresses using dma_to_phys in xen_swiotlb_free_coherent and xen_swiotlb_unmap_page if we want to do any operations on them. Call dma_to_phys in is_xen_swiotlb_buffer. Introduce xen_phys_to_dma and call phys_to_dma in its implementation. Introduce xen_dma_to_phys and call dma_to_phys in its implementation. Call xen_phys_to_dma/xen_dma_to_phys instead of xen_phys_to_bus/xen_bus_to_phys through swiotlb-xen.c. Everything is taken care of by these changes except for xen_swiotlb_alloc_coherent and xen_swiotlb_free_coherent, which need a few explicit phys_to_dma/dma_to_phys calls. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20200710223427.6897-9-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04swiotlb-xen: remove XEN_PFN_PHYSStefano Stabellini
XEN_PFN_PHYS is only used in one place in swiotlb-xen making things more complex than need to be. Remove the definition of XEN_PFN_PHYS and open code the cast in the one place where it is needed. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20200710223427.6897-8-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04swiotlb-xen: add struct device * parameter to is_xen_swiotlb_bufferStefano Stabellini
No functional changes. The parameter is unused in this patch but will be used by next patches. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-7-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04swiotlb-xen: add struct device * parameter to xen_dma_sync_for_deviceStefano Stabellini
No functional changes. The parameter is unused in this patch but will be used by next patches. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-6-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04swiotlb-xen: add struct device * parameter to xen_dma_sync_for_cpuStefano Stabellini
No functional changes. The parameter is unused in this patch but will be used by next patches. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-5-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04swiotlb-xen: add struct device * parameter to xen_bus_to_physStefano Stabellini
No functional changes. The parameter is unused in this patch but will be used by next patches. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-4-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04swiotlb-xen: add struct device * parameter to xen_phys_to_busStefano Stabellini
No functional changes. The parameter is unused in this patch but will be used by next patches. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-3-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04swiotlb-xen: remove start_dma_addrStefano Stabellini
It is not strictly needed. Call virt_to_phys on xen_io_tlb_start instead. It will be useful not to have a start_dma_addr around with the next patches. Note that virt_to_phys is not the same as xen_virt_to_bus but actually it is used to compared again __pa(xen_io_tlb_start) as passed to swiotlb_init_with_tbl, so virt_to_phys is actually what we want. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-2-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-04swiotlb-xen: use vmalloc_to_page on vmalloc virt addressesBoris Ostrovsky
xen_alloc_coherent_pages might return pages for which virt_to_phys and virt_to_page don't work, e.g. ioremap'ed pages. So in xen_swiotlb_free_coherent we can't assume that virt_to_page works. Instead add a is_vmalloc_addr check and use vmalloc_to_page on vmalloc virt addresses. This patch fixes the following crash at boot on RPi4 (the underlying issue is not RPi4 specific): https://marc.info/?l=xen-devel&m=158862573216800 Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-1-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-03mailbox: mediatek: cmdq: clear task in channel before shutdownDennis YC Hsieh
Do success callback in channel when shutdown. For those task not finish, callback with error code thus client has chance to cleanup or reset. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2020-08-03mailbox: cmdq: support mt6779 gce platform definitionDennis YC Hsieh
Add gce v4 hardware support with different thread number and shift. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2020-08-03mailbox: cmdq: variablize address shift in platformDennis YC Hsieh
Some gce hardware shift pc and end address in register to support large dram addressing. Implement gce address shift when write or read pc and end register. And add shift bit in platform definition. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2020-08-03dt-binding: gce: add gce header file for mt6779Dennis YC Hsieh
Add documentation for the mt6779 gce. Add gce header file defined the gce hardware event, subsys number and constant for mt6779. Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2020-08-03mailbox: qcom: Add msm8994 apcs compatibleKonrad Dybcio
MSM8994 has an APCS block similar to 8916, but with a different clock driver due to the former one having 2 clusters. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2020-08-03mailbox: qcom: Add sdm660 hmss compatibleKonrad Dybcio
The Qualcomm SDM660 platform has a APCS HMSS GLOBAL block, add the compatible for this. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2020-08-03mailbox: imx: Mark PM functions as __maybe_unusedNathan Chancellor
When CONFIG_PM and CONFIG_PM_SLEEP are unset, the following warnings occur: drivers/mailbox/imx-mailbox.c:638:12: warning: 'imx_mu_runtime_resume' defined but not used [-Wunused-function] 638 | static int imx_mu_runtime_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~ drivers/mailbox/imx-mailbox.c:629:12: warning: 'imx_mu_runtime_suspend' defined but not used [-Wunused-function] 629 | static int imx_mu_runtime_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~ drivers/mailbox/imx-mailbox.c:611:12: warning: 'imx_mu_resume_noirq' defined but not used [-Wunused-function] 611 | static int imx_mu_resume_noirq(struct device *dev) | ^~~~~~~~~~~~~~~~~~~ drivers/mailbox/imx-mailbox.c:601:12: warning: 'imx_mu_suspend_noirq' defined but not used [-Wunused-function] 601 | static int imx_mu_suspend_noirq(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~ Mark these functions as __maybe_unused, which is the standard procedure for PM functions. Fixes: bb2b2624dbe2 ("mailbox: imx: Add runtime PM callback to handle MU clocks") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-12 21:33:14 +0000