| Age | Commit message (Collapse) | Author |
|---|
|
In order to free the rules in a chain via call_rcu, the rule array used
to stash a rcu_head and space for a pointer at the end of the rule array.
When the current nft_rule_dp blob format got added in
2c865a8a28a1 ("netfilter: nf_tables: add rule blob layout"), this results
in a double-trailer:
size (unsigned long)
struct nft_rule_dp
struct nft_expr
...
struct nft_rule_dp
struct nft_expr
...
struct nft_rule_dp (is_last=1) // Trailer
The trailer, struct nft_rule_dp (is_last=1), is not accounted for in size,
so it can be located via start_addr + size.
Because the rcu_head is stored after 'start+size' as well this means the
is_last trailer is *aliased* to the rcu_head (struct nft_rules_old).
This is harmless, because at this time the nft_do_chain function never
evaluates/accesses the trailer, it only checks the address boundary:
for (; rule < last_rule; rule = nft_rule_next(rule)) {
...
But this way the last_rule address has to be stashed in the jump
structure to restore it after returning from a chain.
nft_do_chain stack usage has become way too big, so put it on a diet.
Without this patch is impossible to use
for (; !rule->is_last; rule = nft_rule_next(rule)) {
... because on free, the needed update of the rcu_head will clobber the
nft_rule_dp is_last bit.
Furthermore, also stash the chain pointer in the trailer, this allows
to recover the original chain structure from nf_tables_trace infra
without a need to place them in the jump struct.
After this patch it is trivial to diet the jump stack structure,
done in the next two patches.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.3, part #4
- Plug a buffer overflow due to the use of the user-provided register
width for firmware regs. Outright reject accesses where the
user register width does not match the kernel representation.
- Protect non-atomic RMW operations on vCPU flags against preemption,
as an update to the flags by an intervening preemption could be lost.
|
|
MIPS's exit sections are discarded at runtime as well.
Fixes link error:
`.exit.text' referenced in section `__jump_table' of fs/fuse/inode.o:
defined in discarded section `.exit.text' of fs/fuse/inode.o
Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This reverts commit 5c62d5aab8752e5ee7bfbe75ed6060db1c787f98.
This broke wake-on-lan for multiple people, and for much too long.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217069
Link: https://lore.kernel.org/all/754225a2-95a9-2c36-1886-7da1a78308c2@loongson.cn/
Link: https://github.com/acpica/acpica/pull/866
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Jianmin Lv <lvjianmin@loongson.cn>
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Bob Moore <robert.moore@intel.com>
Cc: stable@kernel.org # 6.2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Test verifier/value_ptr_arith automatically converted to use inline assembly.
Test cases "sanitation: alu with different scalars 2" and
"sanitation: alu with different scalars 3" are updated to
avoid -ENOENT as return value, as __retval() annotation
only supports numeric literals.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-25-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/value_illegal_alu automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-24-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/unpriv semi-automatically converted to use inline assembly.
The verifier/unpriv.c had to be split in two parts:
- the bulk of the tests is in the progs/verifier_unpriv.c;
- the single test that needs `struct bpf_perf_event_data`
definition is in the progs/verifier_unpriv_perf.c.
The tests above can't be in a single file because:
- first requires inclusion of the filter.h header
(to get access to BPF_ST_MEM macro, inline assembler does
not support this isntruction);
- the second requires vmlinux.h, which contains definitions
conflicting with filter.h.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-23-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/subreg automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-22-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/spin_lock automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-21-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/sock automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-20-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/search_pruning automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-19-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/runtime_jit automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-18-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/regalloc automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-17-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/ref_tracking automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-16-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/map_ptr_mixing automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-13-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/map_in_map automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-12-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/lwt automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/loops1 automatically converted to use inline assembly.
There are a few modifications for the converted tests.
"tracepoint" programs do not support test execution, change program
type to "xdp" (which supports test execution) for the following tests
that have __retval tags:
- bounded loop, count to 4
- bonded loop containing forward jump
Also, remove the __retval tag for test:
- bounded loop, count from positive unknown to 4
As it's return value is a random number.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/jeq_infer_not_null automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/direct_packet_access automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/d_path automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/ctx automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/btf_ctx_access automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/bpf_get_stack automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/bounds automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In order to express test cases that use bpf_tail_call() intrinsic it
is necessary to have several programs to be loaded at a time.
This commit adds __auxiliary annotation to the set of annotations
supported by test_loader.c. Programs marked as auxiliary are always
loaded but are not treated as a separate test.
For example:
void dummy_prog1(void);
struct {
__uint(type, BPF_MAP_TYPE_PROG_ARRAY);
__uint(max_entries, 4);
__uint(key_size, sizeof(int));
__array(values, void (void));
} prog_map SEC(".maps") = {
.values = {
[0] = (void *) &dummy_prog1,
},
};
SEC("tc")
__auxiliary
__naked void dummy_prog1(void) {
asm volatile ("r0 = 42; exit;");
}
SEC("tc")
__description("reference tracking: check reference or tail call")
__success __retval(0)
__naked void check_reference_or_tail_call(void)
{
asm volatile (
"r2 = %[prog_map] ll;"
"r3 = 0;"
"call %[bpf_tail_call];"
"r0 = 0;"
"exit;"
:: __imm(bpf_tail_call),
: __clobber_all);
}
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Florian Westphal says:
====================
Changes since last version:
- rework test case in last patch wrt. ctx->skb dereference etc (Alexei)
- pacify bpf ci tests, netfilter program type missed string translation
in libbpf helper.
This still uses runtime btf walk rather than extending
the btf trace array as Alexei suggested, I would do this later (or someone else can).
v1 cover letter:
Add minimal support to hook bpf programs to netfilter hooks, e.g.
PREROUTING or FORWARD.
For this the most relevant parts for registering a netfilter
hook via the in-kernel api are exposed to userspace via bpf_link.
The new program type is 'tracing style', i.e. there is no context
access rewrite done by verifier, the function argument (struct bpf_nf_ctx)
isn't stable.
There is no support for direct packet access, dynptr api should be used
instead.
With this its possible to build a small test program such as:
#include "vmlinux.h"
extern int bpf_dynptr_from_skb(struct __sk_buff *skb, __u64 flags,
struct bpf_dynptr *ptr__uninit) __ksym;
extern void *bpf_dynptr_slice(const struct bpf_dynptr *ptr, uint32_t offset,
void *buffer, uint32_t buffer__sz) __ksym;
SEC("netfilter")
int nf_test(struct bpf_nf_ctx *ctx)
{
struct nf_hook_state *state = ctx->state;
struct sk_buff *skb = ctx->skb;
const struct iphdr *iph, _iph;
const struct tcphdr *th, _th;
struct bpf_dynptr ptr;
if (bpf_dynptr_from_skb(skb, 0, &ptr))
return NF_DROP;
iph = bpf_dynptr_slice(&ptr, 0, &_iph, sizeof(_iph));
if (!iph)
return NF_DROP;
th = bpf_dynptr_slice(&ptr, iph->ihl << 2, &_th, sizeof(_th));
if (!th)
return NF_DROP;
bpf_printk("accept %x:%d->%x:%d, hook %d ifin %d\n",
iph->saddr, bpf_ntohs(th->source), iph->daddr,
bpf_ntohs(th->dest), state->hook, state->in->ifindex);
return NF_ACCEPT;
}
Then, tail /sys/kernel/tracing/trace_pipe.
Changes since v3:
- uapi: remove 'reserved' struct member, s/prio/priority (Alexei)
- add ctx access test cases (Alexei, see last patch)
- some arm32 can only handle cmpxchg on u32 (build bot)
- Fix kdoc annotations (Simon Horman)
- bpftool: prefer p_err, not fprintf (Quentin)
- add test cases in separate patch
Changes since v2:
1. don't WARN when user calls 'bpftool loink detach' twice
restrict attachment to ip+ip6 families, lets relax this
later in case arp/bridge/netdev are needed too.
2. show netfilter links in 'bpftool net' output as well.
Changes since v1:
1. Don't fail to link when CONFIG_NETFILTER=n (build bot)
2. Use test_progs instead of test_verifier (Alexei)
Changes since last RFC version:
1. extend 'bpftool link show' to print prio/hooknum etc
2. extend 'nft list hooks' so it can print the bpf program id
3. Add an extra patch to artificially restrict bpf progs with
same priority. Its fine from a technical pov but it will
cause ordering issues (most recent one comes first).
Can be removed later.
4. Add test_run support for netfilter prog type and a small
extension to verifier tests to make sure we can't return
verdicts like NF_STOLEN.
5. Alter the netfilter part of the bpf_link uapi struct:
- add flags/reserved members.
Not used here except returning errors when they are nonzero.
Plan is to allow the bpf_link users to enable netfilter
defrag or conntrack engine by setting feature flags at
link create time in the future.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Extend prog_tests with two test cases:
# ./test_progs --allow=verifier_netfilter_retcode
#278/1 verifier_netfilter_retcode/bpf_exit with invalid return code. test1:OK
#278/2 verifier_netfilter_retcode/bpf_exit with valid return code. test2:OK
#278/3 verifier_netfilter_retcode/bpf_exit with valid return code. test3:OK
#278/4 verifier_netfilter_retcode/bpf_exit with invalid return code. test4:OK
#278 verifier_netfilter_retcode:OK
This checks that only accept and drop (0,1) are permitted.
NF_QUEUE could be implemented later if we can guarantee that attachment
of such programs can be rejected if they get attached to a pf/hook that
doesn't support async reinjection.
NF_STOLEN could be implemented via trusted helpers that can guarantee
that the skb will eventually be free'd.
v4: test case for bpf_nf_ctx access checks, requested by Alexei Starovoitov.
v5: also check ctx->{state,skb} can be dereferenced (Alexei).
# ./test_progs --allow=verifier_netfilter_ctx
#281/1 verifier_netfilter_ctx/netfilter invalid context access, size too short:OK
#281/2 verifier_netfilter_ctx/netfilter invalid context access, size too short:OK
#281/3 verifier_netfilter_ctx/netfilter invalid context access, past end of ctx:OK
#281/4 verifier_netfilter_ctx/netfilter invalid context, write:OK
#281/5 verifier_netfilter_ctx/netfilter valid context read and invalid write:OK
#281/6 verifier_netfilter_ctx/netfilter test prog with skb and state read access:OK
#281/7 verifier_netfilter_ctx/netfilter test prog with skb and state read access @unpriv:OK
#281 verifier_netfilter_ctx:OK
Summary: 1/7 PASSED, 0 SKIPPED, 0 FAILED
This checks:
1/2: partial reads of ctx->{skb,state} are rejected
3. read access past sizeof(ctx) is rejected
4. write to ctx content, e.g. 'ctx->skb = NULL;' is rejected
5. ctx->state content cannot be altered
6. ctx->state and ctx->skb can be dereferenced
7. ... same program fails for unpriv (CAP_NET_ADMIN needed).
Link: https://lore.kernel.org/bpf/20230419021152.sjq4gttphzzy6b5f@dhcp-172-26-102-232.dhcp.thefacebook.com/
Link: https://lore.kernel.org/bpf/20230420201655.77kkgi3dh7fesoll@MacBook-Pro-6.local/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-8-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
add glue code so a bpf program can be run using userspace-provided
netfilter state and packet/skb.
Default is to use ipv4:output hook point, but this can be overridden by
userspace. Userspace provided netfilter state is restricted, only hook and
protocol families can be overridden and only to ipv4/ipv6.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-7-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Dump protocol family, hook and priority value:
$ bpftool link
2: netfilter prog 14
ip input prio -128
pids install(3264)
5: netfilter prog 14
ip6 forward prio 21
pids a.out(3387)
9: netfilter prog 14
ip prerouting prio 123
pids a.out(5700)
10: netfilter prog 14
ip input prio 21
pids test2(5701)
v2: Quentin Monnet suggested to also add 'bpftool net' support:
$ bpftool net
xdp:
tc:
flow_dissector:
netfilter:
ip prerouting prio 21 prog_id 14
ip input prio -128 prog_id 14
ip input prio 21 prog_id 14
ip forward prio 21 prog_id 14
ip output prio 21 prog_id 14
ip postrouting prio 21 prog_id 14
'bpftool net' only dumps netfilter link type, links are sorted by protocol
family, hook and priority.
v5: fix bpf ci failure: libbpf needs small update to prog_type_name[]
and probe_prog_load helper.
v4: don't fail with -EOPNOTSUPP in libbpf probe_prog_load, update
prog_type_name[] with "netfilter" entry (bpf ci)
v3: fix bpf.h copy, 'reserved' member was removed (Alexei)
use p_err, not fprintf (Quentin)
Suggested-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/eeeaac99-9053-90c2-aa33-cc1ecb1ae9ca@isovalent.com/
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-6-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This is just to avoid ordering issues between multiple bpf programs,
this could be removed later in case it turns out to be too cautious.
bpf prog could still be shared with non-bpf hook, otherwise we'd have to
make conntrack hook registration fail just because a bpf program has
same priority.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-5-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This allows userspace ("nft list hooks") to show which bpf program
is attached to which hook.
Without this, user only knows bpf prog is attached at prio
x, y, z at INPUT and FORWARD, but can't tell which program is where.
v4: kdoc fixups (Simon Horman)
Link: https://lore.kernel.org/bpf/ZEELzpNCnYJuZyod@corigine.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-4-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This adds minimal support for BPF_PROG_TYPE_NETFILTER bpf programs
that will be invoked via the NF_HOOK() points in the ip stack.
Invocation incurs an indirect call. This is not a necessity: Its
possible to add 'DEFINE_BPF_DISPATCHER(nf_progs)' and handle the
program invocation with the same method already done for xdp progs.
This isn't done here to keep the size of this chunk down.
Verifier restricts verdicts to either DROP or ACCEPT.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-3-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add bpf_link support skeleton. To keep this reviewable, no bpf program
can be invoked yet, if a program is attached only a c-stub is called and
not the actual bpf program.
Defaults to 'y' if both netfilter and bpf syscall are enabled in kconfig.
Uapi example usage:
union bpf_attr attr = { };
attr.link_create.prog_fd = progfd;
attr.link_create.attach_type = 0; /* unused */
attr.link_create.netfilter.pf = PF_INET;
attr.link_create.netfilter.hooknum = NF_INET_LOCAL_IN;
attr.link_create.netfilter.priority = -128;
err = bpf(BPF_LINK_CREATE, &attr, sizeof(attr));
... this would attach progfd to ipv4:input hook.
Such hook gets removed automatically if the calling program exits.
BPF_NETFILTER program invocation is added in followup change.
NF_HOOK_OP_BPF enum will eventually be read from nfnetlink_hook, it
allows to tell userspace which program is attached at the given hook
when user runs 'nft hook list' command rather than just the priority
and not-very-helpful 'this hook runs a bpf prog but I can't tell which
one'.
Will also be used to disallow registration of two bpf programs with
same priority in a followup patch.
v4: arm32 cmpxchg only supports 32bit operand
s/prio/priority/
v3: restrict prog attachment to ip/ip6 for now, lets lift restrictions if
more use cases pop up (arptables, ebtables, netdev ingress/egress etc).
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-2-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The "struct_ops register" subcommand now allows for an optional *LINK_DIR*
to be included. This specifies the directory path where bpftool will pin
struct_ops links with the same name as their corresponding map names.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230420002822.345222-2-kuifeng@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
You can include an optional path after specifying the object name for the
'struct_ops register' subcommand.
Since the commit 226bc6ae6405 ("Merge branch 'Transit between BPF TCP
congestion controls.'") has been accepted, it is now possible to create a
link for a struct_ops. This can be done by defining a struct_ops in
SEC(".struct_ops.link") to make libbpf returns a real link. If we don't pin
the links before leaving bpftool, they will disappear. To instruct bpftool
to pin the links in a directory with the names of the maps, we need to
provide the path of that directory.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230420002822.345222-1-kuifeng@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two patches fixing the problem with aync discard.
The default settings had a low IOPS limit and processing a large batch
to discard would take a long time. On laptops this can cause increased
power consumption due to disk activity.
As async discard has been on by default since 6.2 this likely affects
a lot of users.
Summary:
- increase the default IOPS limit 10x which reportedly helped
- setting the sysfs IOPS value to 0 now does not throttle anymore
allowing the discards to be processed at full speed. Previously
there was an arbitrary 6 hour target for processing the pending
batch"
* tag 'for-6.3-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: reinterpret async discard iops_limit=0 as no delay
btrfs: set default discard iops_limit to 1000
|
|
Pull block fix from Jens Axboe:
"Just a single revert of a patch from the 6.3 series"
* tag 'block-6.3-2023-04-21' of git://git.kernel.dk/linux:
Revert "block: Merge bio before checking ->cached_rq"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some last-minute tiny driver fixes for 6.3-final. They
include fixes for some fpga and iio drivers:
- fpga bridge driver fix
- fpga dfl error reporting fix
- fpga m10bmc driver fix
- fpga xilinx driver fix
- iio light driver fix
- iio dac fwhandle leak fix
- iio adc driver fix
All of these have been in linux-next for a few weeks with no reported
problems"
* tag 'char-misc-6.3-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
iio: light: tsl2772: fix reading proximity-diodes from device tree
fpga: bridge: properly initialize bridge device before populating children
iio: dac: ad5755: Add missing fwnode_handle_put()
iio: adc: at91-sama5d2_adc: fix an error code in at91_adc_allocate_trigger()
fpga: xilinx-pr-decoupler: Use readl wrapper instead of pure readl
fpga: dfl-pci: Drop redundant pci_enable_pcie_error_reporting()
fpga: m10bmc-sec: Fix rsu_send_data() to return FW_UPLOAD_ERR_HW_ERROR
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- use raw_spinlocks in regmaps that are used in interrupt context in
gpio-104-idi-48 and gpio-104-dio-48e
* tag 'gpio-fixes-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: 104-idi-48: Enable use_raw_spinlock for idi48_regmap_config
gpio: 104-dio-48e: Enable use_raw_spinlock for dio48e_regmap_config
|
|
Commit 7175e131ebba ("fs: dlm: fix invalid derefence of sb_lvbptr")
fixes an issue when the lkb->lkb_lvbptr set to an dangled pointer and an
followed memcpy() would fail. It was fixed by an additional check of
DLM_LKF_VALBLK flag. The mentioned commit forgot to add an additional check
if DLM_LKF_VALBLK is set for the additional amount of LVB data allocated
in a dlm message. This patch is changing the message allocation to check
additionally if DLM_LKF_VALBLK is set otherwise a dangled lkb->lkb_lvbptr
pointer would allocated zero LVB message data which not gets filled with
actual data.
This patch is however only a cleanup to reduce the amount of zero bytes
transmitted over network as receive_lvb() will only evaluates message LVB
data if DLM_LKF_VALBLK is set.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few fixes: all small and device-specific (ASoC FSL, SOF, and
HD-audio quirks), should be safe to apply at the last minute"
* tag 'sound-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
ASoC: fsl_asrc_dma: fix potential null-ptr-deref
ASoC: fsl_sai: Fix pins setting for i.MX8QM platform
ALSA: hda/realtek: Remove specific patch for Dell Precision 3260
ASoC: max98373: change power down sequence for smart amp
ASoC: SOF: pm: Tear down pipelines only if DSP was active
ASoC: SOF: ipc4-topology: Clarify bind failure caused by missing fw_module
|
|
It seems there is a misprint in the check of strdup() return code that
can lead to NULL pointer dereference.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4520c6a49af8 ("X.509: Add simple ASN.1 grammar compiler")
Signed-off-by: Ekaterina Orlova <vorobushek.ok@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: keyrings@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Link: https://lore.kernel.org/r/20230315172130.140-1-vorobushek.ok@gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip changes from Marc Zyngier:
- Large RISC-V IPI rework to make way for a new interrupt
architecture
- More Loongarch fixes from Lianmin Lv, fixing issues in the so
called "dual-bridge" systems.
- Workaround for the nvidia T241 chip that gets confused in
3 and 4 socket configurations, leading to the GIC
malfunctionning in some contexts
- Drop support for non-firmware driven GIC configurarations
now that the old ARM11MP Cavium board is gone
- Workaround for the Rockchip 3588 chip that doesn't
correctly deal with the shareability attributes.
- Replace uses of of_find_property() with the more appropriate
of_property_read_bool()
- Make bcm-6345-l1 request its MMIO region
- Add suspend support to the SiFive PLIC
- Drop support for stih415, stih416 and stid127 platforms
Link: https://lore.kernel.org/lkml/20230421132104.3021536-1-maz@kernel.org
|
|
Make sure we get optlen exported instead of getting EFAULT.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230418225343.553806-3-sdf@google.com
|
|
Some socket options do getsockopt with optval=NULL to estimate the size
of the final buffer (which is returned via optlen). This breaks BPF
getsockopt assumptions about permitted optval buffer size. Let's enforce
these assumptions only when non-NULL optval is provided.
Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Reported-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/ZD7Js4fj5YyI2oLd@google.com/T/#mb68daf700f87a9244a15d01d00c3f0e5b08f49f7
Link: https://lore.kernel.org/bpf/20230418225343.553806-2-sdf@google.com
|
|
extin_mask and extout_mask are used only by the SbLive! microcode, so
they have no effect on Audigy.
Eliminate fxbus_mask entirely, as it wasn't actually used for anything.
As a drive-by, remove the pointless pad1 field from struct
snd_emu10k1_fx8010 - it is not visible to user space, so it has no
binary compatibility constraints.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005509-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When an error occurs during USB disconnection sometimes things can go
wrong as endpoint_set_interface may end up being called repeatedly. For
example:
% dmesg --notime | grep 'usb 3-7.1.4' | sort | uniq -c | head -2
3069 usb 3-7.1.4: 1:1: usb_set_interface failed (-19)
908 usb 3-7.1.4: 1:1: usb_set_interface failed (-71)
In my case, there sometimes are hundreds of these usb_set_interface
failure messages a second when I disconnect the hub that has my USB
audio device.
These messages can take a huge amount of the kmsg ringbuffer and don't
provide any extra information over the previous ones, so ratelimit them.
Signed-off-by: Chris Down <chris@chrisdown.name>
Link: https://lore.kernel.org/r/ZEKf8UYBYa1h4JWR@chrisdown.name
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Set on IPS_CONFIRMED before change_status() otherwise EBUSY is
bogusly hit. This bug was introduced in the 6.3 release cycle.
2) Fix nfnetlink_queue conntrack support: Set/dump timeout
accordingly for unconfirmed conntrack entries. Make sure this
is done after IPS_CONFIRMED is set on. This is an old bug, it
happens since the introduction of this feature.
* tag 'nf-23-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: fix wrong ct->timeout value
netfilter: conntrack: restore IPS_CONFIRMED out of nf_conntrack_hash_check_insert()
====================
Link: https://lore.kernel.org/r/20230421105700.325438-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
- Update some outdated info
- Language fixes
- Whitespace/formatting fixes
- Prefer attached over stand-alone '::'
[ dropped a trailing white space in the patch -- tiwai ]
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421112751.990244-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
