summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-21Merge tag 'wireless-next-2023-04-21' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.4 Most likely the last -next pull request for v6.4. We have changes all over. rtw88 now supports SDIO bus and iwlwifi continues to work on Wi-Fi 7 support. Not much stack changes this time. Major changes: cfg80211/mac80211 - fix some Fine Time Measurement (FTM) frames not being bufferable - flush frames before key removal to avoid potential unencrypted transmission depending on the hardware design iwlwifi - preparation for Wi-Fi 7 EHT and multi-link support rtw88 - SDIO bus support - RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support rtw89 - framework firmware backwards compatibility brcmfmac - Cypress 43439 SDIO support mt76 - mt7921 P2P support - mt7996 mesh A-MSDU support - mt7996 EHT support - mt7996 coredump support wcn36xx - support for pronto v3 hardware ath11k - PCIe DeviceTree bindings - WCN6750: enable SAR support ath10k - convert DeviceTree bindings to YAML * tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits) wifi: rtw88: Update spelling in main.h wifi: airo: remove ISA_DMA_API dependency wifi: rtl8xxxu: Simplify setting the initial gain wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear} wifi: rtl8xxxu: Don't print the vendor/product/serial wifi: rtw88: Fix memory leak in rtw88_usb wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant wifi: rtw88: set pkg_type correctly for specific rtw8821c variants wifi: rtw88: rtw8821c: Fix rfe_option field width wifi: rtw88: usb: fix priority queue to endpoint mapping wifi: rtw88: 8822c: add iface combination wifi: rtw88: handle station mode concurrent scan with AP mode wifi: rtw88: prevent scan abort with other VIFs wifi: rtw88: refine reserved page flow for AP mode wifi: rtw88: disallow PS during AP mode wifi: rtw88: 8822c: extend reserved page number wifi: rtw88: add port switch for AP mode wifi: rtw88: add bitmap for dynamic port settings wifi: rtw89: mac: use regular int as return type of DLE buffer request wifi: mac80211: remove return value check of debugfs_create_dir() ... ==================== Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21selftests/xsk: Put MAP_HUGE_2MB in correct argumentMagnus Karlsson
Put the flag MAP_HUGE_2MB in the correct flags argument instead of the wrong offset argument. Fixes: 2ddade322925 ("selftests/xsk: Fix munmap for hugepage allocated umem") Reported-by: Kal Cutter Conley <kal.conley@dectris.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230421062208.3772-1-magnus.karlsson@gmail.com
2023-04-21bpf: Fix bpf_refcount_acquire's refcount_t address calculationDave Marchevsky
When calculating the address of the refcount_t struct within a local kptr, bpf_refcount_acquire_impl should add refcount_off bytes to the address of the local kptr. Due to some missing parens, the function is incorrectly adding sizeof(refcount_t) * refcount_off bytes. This patch fixes the calculation. Due to the incorrect calculation, bpf_refcount_acquire_impl was trying to refcount_inc some memory well past the end of local kptrs, resulting in kasan and refcount complaints, as reported in [0]. In that thread, Florian and Eduard discovered that bpf selftests written in the new style - with __success and an expected __retval, specifically - were not actually being run. As a result, selftests added in bpf_refcount series weren't really exercising this behavior, and thus didn't unearth the bug. With this fixed behavior it's safe to revert commit 7c4b96c00043 ("selftests/bpf: disable program test run for progs/refcounted_kptr.c"), this patch does so. [0] https://lore.kernel.org/bpf/ZEEp+j22imoN6rn9@strlen.de/ Fixes: 7c50b1cb76ac ("bpf: Add bpf_refcount_acquire kfunc") Reported-by: Florian Westphal <fw@strlen.de> Reported-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20230421074431.3548349-1-davemarchevsky@fb.com
2023-04-21bpf: Fix race between btf_put and btf_idr walk.Alexei Starovoitov
Florian and Eduard reported hard dead lock: [ 58.433327] _raw_spin_lock_irqsave+0x40/0x50 [ 58.433334] btf_put+0x43/0x90 [ 58.433338] bpf_find_btf_id+0x157/0x240 [ 58.433353] btf_parse_fields+0x921/0x11c0 This happens since btf->refcount can be 1 at the time of btf_put() and btf_put() will call btf_free_id() which will try to grab btf_idr_lock and will dead lock. Avoid the issue by doing btf_put() without locking. Fixes: 3d78417b60fb ("bpf: Add bpf_btf_find_by_name_kind() helper.") Fixes: 1e89106da253 ("bpf: Add bpf_core_add_cands() and wire it into bpf_core_apply_relo_insn().") Reported-by: Florian Westphal <fw@strlen.de> Reported-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20230421014901.70908-1-alexei.starovoitov@gmail.com
2023-04-21hwmon: (pmbus/fsp-3y) Fix functionality bitmask in FSP-3Y YM-2151ETomáš Pecka
The bit flags in pmbus_driver_info functionality for YM-2151E chip were joined with a comma operator instead of a bitwise OR. This means that the last constant PMBUS_HAVE_IIN was not OR-ed with the other PM_BUS_HAVE_* constants for this page but it initialized the next element of the func array (which was not accessed from anywhere because of the number of pages). However, there is no need for setting PMBUS_HAVE_IIN in the 5Vsb page because this command does not seem to be paged. Obviously, the device only has one IIN sensor, so it doesn't make sense to query it again from the second page. Fixes: 1734b4135a62 ("hwmon: Add driver for fsp-3y PSUs and PDUs") Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Tomáš Pecka <tomas.pecka@cesnet.cz> Link: https://lore.kernel.org/r/20230420171939.212040-1-tomas.pecka@cesnet.cz Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-21hwmon: (adt7475) Use device_property APIs when configuring polarityChris Packham
On DT unaware platforms of_property_read_u32_array() returns -ENOSYS which wasn't handled by the code treating adi,pwm-active-state as optional. Update the code to use device_property_read_u32_array() which deals gracefully with DT unaware platforms. Fixes: 86da28eed4fb ("hwmon: (adt7475) Add support for inverting pwm output") Reported-by: Mariusz Białończyk <manio@skyboo.net> Link: https://lore.kernel.org/linux-hwmon/52e26a67-9131-2dc0-40cb-db5c07370027@alliedtelesis.co.nz/T/#mdd0505801e0a4e72340de009a47c0fca4f771ed3 Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20230418233656.869055-2-chris.packham@alliedtelesis.co.nz Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-21hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream XTAleksa Savic
Extend aquacomputer_d5next driver to expose various hardware sensors of the Aquacomputer Aquastream XT watercooling pump, which communicates through a proprietary USB HID protocol. Implemented by Leonard Anderweit [1] [2]. Coolant temp, fan IC and external temp sensor readings are available, along with speed and voltage of both the pump and optionally connected fan. It also exposes pump current. Additionally, serial number and firmware version are exposed through debugfs. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/46 [2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/49 Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20230416181702.9892-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-21hwmon: (it87) Disable/enable SMBus access for IT8622E chipsetFrank Crawford
Configure the IT8622E chip to disable/re-enable access via an SMBus when reading or writing the chip's registers. Signed-off-by: Frank Crawford <frank@crawford.emu.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-21hwmon: (it87) Add calls to smbus_enable/smbus_disable as requiredFrank Crawford
Disable/re-enable access through SMBus for chip registers when they are are being read or written. For simple cases this is done at the same time as when a mutex is set, however, within loops or during initialisation it is done separately. Signed-off-by: Frank Crawford <frank@crawford.emu.id.au> [groeck: Fixed multi-line alignment] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-21hwmon: (it87) Test for error in it87_update_deviceFrank Crawford
Handle errors from it87_update_device(), which currently only occurs if SMBus access locking fails. Signed-off-by: Frank Crawford <frank@crawford.emu.id.au> [groeck: Fixed handling in show_temp_type()] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-21bus: tegra-gmi: Replace of_platform.h with explicit includesRob Herring
Tegra-gmi doesn't use anything from of_platform.h, but depends on of.h, of_device.h, and platform_device.h which are all implicitly included, but that is going to be removed soon. Link: https://lore.kernel.org/r/20230410232735.1562296-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-04-21hte: Use of_property_present() for testing DT property presenceRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Acked-by: Dipen Patel <dipenp@nvidia.com> Link: https://lore.kernel.org/r/20230310144706.1542365-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-04-21w1: w1-gpio: Use of_property_read_bool() for boolean propertiesRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Link: https://lore.kernel.org/r/20230310144737.1547200-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-04-21virt: fsl: Use of_property_present() for testing DT property presenceRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Link: https://lore.kernel.org/r/20230310144731.1546259-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-04-21soc: fsl: Use of_property_present() for testing DT property presenceRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Link: https://lore.kernel.org/r/20230310144723.1545069-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-04-21sbus: display7seg: Use of_property_read_bool() for boolean propertiesRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Link: https://lore.kernel.org/r/20230310144723.1544930-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-04-21spi: tegra210-quad: Enable TPM wait pollingKrishna Yarlagadda
Trusted Platform Module requires flow control. As defined in TPM interface specification, client would drive MISO line at same cycle as last address bit on MOSI. Tegra234 and Tegra241 QSPI controllers have TPM wait state detection feature which is enabled for TPM client devices reported in SPI device mode bits. Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20230421091309.2672-4-kyarlagadda@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-04-21spi: Add TPM HW flow flagKrishna Yarlagadda
TPM specification [1] defines flow control over SPI. Client device can insert a wait state on MISO when address is transmitted by controller on MOSI. Detecting the wait state in software is only possible for full duplex controllers. For controllers that support only half- duplex, the wait state detection needs to be implemented in hardware. Add a flag SPI_TPM_HW_FLOW for TPM device to set when software flow control is not possible and hardware flow control is expected from SPI controller. Reference: [1] https://trustedcomputinggroup.org/resource/pc-client-platform-tpm -profile-ptp-specification/ Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20230421091309.2672-2-kyarlagadda@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-04-21posix-cpu-timers: Implement the missing timer_wait_running callbackThomas Gleixner
For some unknown reason the introduction of the timer_wait_running callback missed to fixup posix CPU timers, which went unnoticed for almost four years. Marco reported recently that the WARN_ON() in timer_wait_running() triggers with a posix CPU timer test case. Posix CPU timers have two execution models for expiring timers depending on CONFIG_POSIX_CPU_TIMERS_TASK_WORK: 1) If not enabled, the expiry happens in hard interrupt context so spin waiting on the remote CPU is reasonably time bound. Implement an empty stub function for that case. 2) If enabled, the expiry happens in task work before returning to user space or guest mode. The expired timers are marked as firing and moved from the timer queue to a local list head with sighand lock held. Once the timers are moved, sighand lock is dropped and the expiry happens in fully preemptible context. That means the expiring task can be scheduled out, migrated, interrupted etc. So spin waiting on it is more than suboptimal. The timer wheel has a timer_wait_running() mechanism for RT, which uses a per CPU timer-base expiry lock which is held by the expiry code and the task waiting for the timer function to complete blocks on that lock. This does not work in the same way for posix CPU timers as there is no timer base and expiry for process wide timers can run on any task belonging to that process, but the concept of waiting on an expiry lock can be used too in a slightly different way: - Add a mutex to struct posix_cputimers_work. This struct is per task and used to schedule the expiry task work from the timer interrupt. - Add a task_struct pointer to struct cpu_timer which is used to store a the task which runs the expiry. That's filled in when the task moves the expired timers to the local expiry list. That's not affecting the size of the k_itimer union as there are bigger union members already - Let the task take the expiry mutex around the expiry function - Let the waiter acquire a task reference with rcu_read_lock() held and block on the expiry mutex This avoids spin-waiting on a task which might not even be on a CPU and works nicely for RT too. Fixes: ec8f954a40da ("posix-timers: Use a callback for cancel synchronization on PREEMPT_RT") Reported-by: Marco Elver <elver@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Marco Elver <elver@google.com> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87zg764ojw.ffs@tglx
2023-04-21Merge branch irq/misc-6.4 into irq/irqchip-nextMarc Zyngier
* irq/misc-6.4: : . : Misc irqchip changes for 6.4: : : - Replace uses of of_find_property() with the more : appropriate of_property_read_bool() : : - Make bcm-6345-l1 request its MMIO region : : - Add suspend support to the SiFive PLIC : : - Drop support for stih415, stih416 and stid127 platforms : . irqchip/st: Remove stih415/stih416 and stid127 platforms support irqchip/irq-sifive-plic: Add syscore callbacks for hibernation irqchip: Use of_property_read_bool() for boolean properties irqchip/bcm-6345-l1: Request memory region Signed-off-by: Marc Zyngier <maz@kernel.org>
2023-04-21Merge branch irq/loongarch-fixes-6.4 into irq/irqchip-nextMarc Zyngier
* irq/loongarch-fixes-6.4: : . : More Loongarch fixes from Lianmin Lv, fixing issues : in the so called "dual-bridge" systems. : . irqchip/loongson-pch-pic: Fix pch_pic_acpi_init calling irqchip/loongson-pch-pic: Fix registration of syscore_ops irqchip/loongson-eiointc: Fix registration of syscore_ops irqchip/loongson-eiointc: Fix incorrect use of acpi_get_vec_parent irqchip/loongson-eiointc: Fix returned value on parsing MADT Signed-off-by: Marc Zyngier <maz@kernel.org>
2023-04-21Merge branch irq/riscv-ipi into irq/irqchip-nextMarc Zyngier
* irq/riscv-ipi: : . : RISC-V IPI rework from Anup Patel: : : "This series aims to improve IPI support in Linux RISC-V in following ways: : 1) Treat IPIs as normal per-CPU interrupts instead of having custom RISC-V : specific hooks. This also makes Linux RISC-V IPI support aligned with : other architectures. : 2) Remote TLB flushes and icache flushes should prefer local IPIs instead : of SBI calls whenever we have specialized hardware (such as RISC-V AIA : IMSIC and RISC-V SWI) which allows S-mode software to directly inject : IPIs without any assistance from M-mode runtime firmware." : . irqchip/riscv-intc: Add empty irq_eoi() for chained irq handlers RISC-V: Use IPIs for remote icache flush when possible RISC-V: Use IPIs for remote TLB flush when possible RISC-V: Allow marking IPIs as suitable for remote FENCEs RISC-V: Treat IPIs as normal Linux IRQs irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode RISC-V: Clear SIP bit only when using SBI IPI operations Signed-off-by: Marc Zyngier <maz@kernel.org>
2023-04-21Merge branch irq/gic-6.4 into irq/irqchip-nextMarc Zyngier
* irq/gic-6.4: : . : Collection of GIC/GICv3 fixes and cleanups : : - Workaround for the nvidia T241 chip that gets confused : in 3 and 4 socket configurations, leading to the GIC : malfunctionning in some contexts : : - Drop support for non-firmware driven GIC configurarations : now that the old ARM11MP Cavium board is gone : : - Workaround for the Rockchip 3588 chip that doesn't : correctly deal with the shareability attributes. : . irqchip/gic-v3: Add Rockchip 3588001 erratum workaround irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4 irqchip/gic: Drop support for board files Signed-off-by: Marc Zyngier <maz@kernel.org>
2023-04-21spi: bcm63xx: remove PM_SLEEP based conditional compilationDhruva Gole
Get rid of conditional compilation based on CONFIG_PM_SLEEP because it may introduce build issues with certain configs where it maybe disabled This is because if above config is not enabled the suspend-resume functions are never part of the code but the bcm63xx_spi_pm_ops struct still inits them to non-existent suspend-resume functions. Fixes: b42dfed83d95 ("spi: add Broadcom BCM63xx SPI controller driver") Signed-off-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20230420121615.967487-1-d-gole@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-04-21ASoC: fsl: imx-audmix: remove dummy dai_link->platformKuninori Morimoto
Dummy dai_link->platform is not needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Tested-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/877cu6f619.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-04-21ASoC: fsl: imx-audmix: cleanup platform which is using Generic DMAKuninori Morimoto
If CPU is using soc-generic-dmaengine-pcm, Platform Component will be same as CPU Component. In this case, we can use CPU dlc for Platform dlc. This patch shares CPU dlc with Platform, and add comment. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Tested-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/878remf61j.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-04-21ASoC: fsl: imx-spdif: cleanup platform which is using Generic DMAKuninori Morimoto
If CPU is using soc-generic-dmaengine-pcm, Platform Component will be same as CPU Component. In this case, we can use CPU dlc for Platform dlc. This patch shares CPU dlc with Platform, and add comment. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Tested-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/87a5z2f61w.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-04-21ASoC: fsl: imx-es8328: cleanup platform which is using Generic DMAKuninori Morimoto
If CPU is using soc-generic-dmaengine-pcm, Platform Component will be same as CPU Component. In this case, we can use CPU dlc for Platform dlc. This patch shares CPU dlc with Platform, and add comment. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Tested-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/87bkjif628.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-04-21net/packet: support mergeable feature of virtioJianfeng Tan
Packet sockets, like tap, can be used as the backend for kernel vhost. In packet sockets, virtio net header size is currently hardcoded to be the size of struct virtio_net_hdr, which is 10 bytes; however, it is not always the case: some virtio features, such as mrg_rxbuf, need virtio net header to be 12-byte long. Mergeable buffers, as a virtio feature, is worthy of supporting: packets that are larger than one-mbuf size will be dropped in vhost worker's handle_rx if mrg_rxbuf feature is not used, but large packets cannot be avoided and increasing mbuf's size is not economical. With this virtio feature enabled by virtio-user, packet sockets with hardcoded 10-byte virtio net header will parse mac head incorrectly in packet_snd by taking the last two bytes of virtio net header as part of mac header. This incorrect mac header parsing will cause packet to be dropped due to invalid ether head checking in later under-layer device packet receiving. By adding extra field vnet_hdr_sz with utilizing holes in struct packet_sock to record currently used virtio net header size and supporting extra sockopt PACKET_VNET_HDR_SZ to set specified vnet_hdr_sz, packet sockets can know the exact length of virtio net header that virtio user gives. In packet_snd, tpacket_snd and packet_recvmsg, instead of using hardcoded virtio net header size, it can get the exact vnet_hdr_sz from corresponding packet_sock, and parse mac header correctly based on this information to avoid the packets being mistakenly dropped. Signed-off-by: Jianfeng Tan <henry.tjf@antgroup.com> Co-developed-by: Anqi Shen <amy.saq@antgroup.com> Signed-off-by: Anqi Shen <amy.saq@antgroup.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21Merge branch 'mlx5-ipsec-fixes'David S. Miller
Leon Romanovsky says: ==================== Fixes to mlx5 IPsec implementation This small patchset includes various fixes and one refactoring patch which I collected for the features sent in this cycle, with one exception - first patch. First patch fixes code which was introduced in previous cycle, however I was able to trigger FW error only in custom debug code, so don't see a need to send it to net-rc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21net/mlx5e: Refactor duplicated code in mlx5e_ipsec_init_macsLeon Romanovsky
ARP discovery code has same logic for RX and TX flows, but with different source and destination fields. Instead of duplicating same code in mlx5e_ipsec_init_macs, let's refactor. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21net/mlx5e: Properly release work data structureLeon Romanovsky
There are some flows in which work structure is not allocated at all and it is needed to be checked prior release of data structure. general protection fault, probably for non-canonical address 0xdffffc000000000a: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057] CPU: 6 PID: 3486 Comm: kworker/6:0 Not tainted 6.3.0-rc5_for_upstream_debug_2023_04_06_11_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: events xfrm_state_gc_task RIP: 0010:mlx5e_xfrm_free_state+0x177/0x260 [mlx5_core] Code: c1 ea 03 80 3c 02 00 0f 85 f5 00 00 00 4c 8b a5 08 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 50 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 b7 00 00 00 49 8b 7c 24 50 e8 85 7c 09 e0 4c 89 RSP: 0018:ffff888137a8fc50 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff888180398000 RCX: 0000000000000000 RDX: 000000000000000a RSI: ffffffffa1878227 RDI: 0000000000000050 RBP: ffff88812a0c8000 R08: ffff888137a8fb60 R09: 0000000000000000 R10: fffffbfff09aba0c R11: 0000000000000001 R12: 0000000000000000 R13: ffff88812a0c8108 R14: ffffffff84c63480 R15: ffff8881acb63118 FS: 0000000000000000(0000) GS:ffff88881eb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f667e8bc000 CR3: 0000000004693006 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ___xfrm_state_destroy+0x3c8/0x5e0 xfrm_state_gc_task+0xf6/0x140 ? ___xfrm_state_destroy+0x5e0/0x5e0 process_one_work+0x7c2/0x1340 ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0 ? pwq_dec_nr_in_flight+0x230/0x230 ? spin_bug+0x1d0/0x1d0 worker_thread+0x59d/0xec0 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x1340/0x1340 kthread+0x28f/0x330 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 Modules linked in: sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm ib_uverbs ib_core vfio_pci vfio_pci_core vfio_iommu_type1 vfio cuse overlay zram zsmalloc fuse [last unloaded: mlx5_core] ---[ end trace 0000000000000000 ]--- Fixes: 4562116f8a56 ("net/mlx5e: Generalize IPsec work structs") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21net/mlx5e: Compare all fields in IPv6 addressLeon Romanovsky
Fix size argument in memcmp to compare whole IPv6 address. Fixes: b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes") Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Emeel Hakim <ehakim@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21net/mlx5e: Don't overwrite extack message returned from IPsec SA validatorLeon Romanovsky
Addition of new err_xfrm label caused to error messages be overwritten. Fix it by using proper NL_SET_ERR_MSG_WEAK_MOD macro together with change in a default message. Fixes: aa8bd0c9518c ("net/mlx5e: Support IPsec acquire default SA") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21net/mlx5e: Fix FW error while setting IPsec policy block actionLeon Romanovsky
When trying to set IPsec policy block action the following error is generated: mlx5_cmd_out_err:803:(pid 3426): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3), err(-22) This error means that drop action is not allowed when modify action is set, so update the code to skip modify header for XFRM_POLICY_BLOCK action. Fixes: 6721239672fe ("net/mlx5e: Skip IPsec encryption for TX path without matching policy") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21net: stmmac:fix system hang when setting up tag_8021q VLAN for DSA portsYan Wang
The system hang because of dsa_tag_8021q_port_setup()-> stmmac_vlan_rx_add_vid(). I found in stmmac_drv_probe() that cailing pm_runtime_put() disabled the clock. First, when the kernel is compiled with CONFIG_PM=y,The stmmac's resume/suspend is active. Secondly,stmmac as DSA master,the dsa_tag_8021q_port_setup() function will callback stmmac_vlan_rx_add_vid when DSA dirver starts. However, The system is hanged for the stmmac_vlan_rx_add_vid() accesses its registers after stmmac's clock is closed. I would suggest adding the pm_runtime_resume_and_get() to the stmmac_vlan_rx_add_vid().This guarantees that resuming clock output while in use. Fixes: b3dcb3127786 ("net: stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Yan Wang <rk.code@outlook.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21ALSA: pcm: rewrite snd_pcm_playback_silence()Oswald Buddenhagen
The auto-silencer supports two modes: "thresholded" to fill up "just enough", and "top-up" to fill up "as much as possible". The two modes used rather distinct code paths, which this patch unifies. The only remaining distinction is how much we actually want to fill. This fixes a bug in thresholded mode, where we failed to use new_hw_ptr, resulting in under-fill. Top-up mode is now more well-behaved and much easier to understand in corner cases. This also updates comments in the proximity of silencing-related data structures. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20230420113324.877164-1-oswald.buddenhagen@gmx.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-04-21m68k: kexec: Include <linux/reboot.h>Simon Horman
Include reboot.h in machine_kexec.c for declaration of machine_crash_shutdown and machine_shutdown. gcc-12 with W=1 reports: arch/m68k/kernel/machine_kexec.c:26:6: warning: no previous prototype for 'machine_shutdown' [-Wmissing-prototypes] 26 | void machine_shutdown(void) | ^~~~~~~~~~~~~~~~ arch/m68k/kernel/machine_kexec.c:30:6: warning: no previous prototype for 'machine_crash_shutdown' [-Wmissing-prototypes] 30 | void machine_crash_shutdown(struct pt_regs *regs) | ^~~~~~~~~~~~~~~~~~~~~~ No functional changes intended. Compile tested only. Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20230421-m68k-kexec-include-reboot-v1-1-7552963a0f25@kernel.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2023-04-21Merge branch 'pds_core'David S. Miller
Shannon Nelson says: ==================== pds_core driver Summary: -------- This patchset implements a new driver for use with the AMD/Pensando Distributed Services Card (DSC), intended to provide core configuration services through the auxiliary_bus and through a couple of EXPORTed functions for use initially in VFio and vDPA feature specific drivers. To keep this patchset to a manageable size, the pds_vdpa and pds_vfio drivers have been split out into their own patchsets to be reviewed separately. Detail: ------- AMD/Pensando is making available a new set of devices for supporting vDPA, VFio, and potentially other features in the Distributed Services Card (DSC). These features are implemented through a PF that serves as a Core device for controlling and configuring its VF devices. These VF devices have separate drivers that use the auxiliary_bus to work through the Core device as the control path. Currently, the DSC supports standard ethernet operations using the ionic driver. This is not replaced by the Core-based devices - these new devices are in addition to the existing Ethernet device. Typical DSC configurations will include both PDS devices and Ionic Eth devices. However, there is a potential future path for ethernet services to come through this device as well. The Core device is a new PCI PF/VF device managed by a new driver 'pds_core'. The PF device has access to an admin queue for configuring the services used by the VFs, and sets up auxiliary_bus devices for each vDPA VF for communicating with the drivers for the vDPA devices. The VFs may be for VFio or vDPA, and other services in the future; these VF types are selected as part of the DSC internal FW configurations, which is out of the scope of this patchset. When the vDPA support set is enabled in the core PF through its devlink param, auxiliary_bus devices are created for each VF that supports the feature. The vDPA driver then connects to and uses this auxiliary_device to do control path configuration through the PF device. This can then be used with the vdpa kernel module to provide devices for virtio_vdpa kernel module for host interfaces, or vhost_vdpa kernel module for interfaces exported into your favorite VM. A cheap ASCII diagram of a vDPA instance looks something like this: ,----------. | vdpa | '----------' | || ctl data | || .----------. || | pds_vdpa | || '----------' || | || pds_core.vDPA.1 || | || .---------------. || | pds_core | || '---------------' || || || || 09:00.0 09:00.1 == PCI ============================================ || || .----------. .----------. ,------| PF |---| VF |-------, | '----------' '----------' | | DSC | | | ------------------------------------------ Changes: v11: - change strncpy to strscpy Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202304181137.WaZTYyAa-lkp@intel.com/ v10: Link: https://lore.kernel.org/netdev/20230418003228.28234-1-shannon.nelson@amd.com/ - remove CONFIG_DEBUG_FS guard static inline stuff - remove unnecessary 0 and null initializations - verify in driver load that PDS_CORE_DRV_NAME matches KBUILD_MODNAME - remove debugfs irqs_show(), redundant with /proc - return -ENOMEM if intr_info = kcalloc() fails - move the status code enum into pds_core_if.h as part of API definition - fix up one place in pdsc_devcmd_wait() we're using the status codes where we could use the errno - remove redundant calls to flush_workqueue() - grab config_lock before testing state bits in pdsc_fw_reporter_diagnose() - change pdsc_color_match() to return bool - remove useless VIF setup loop and just setup vDPA services for now - remove pf pointer from struct padev and have clients use pci_physfn() - drop use of "vf" in auxdev.c function names, make more generic - remove last of client ops struct and simply export the functions - drop drivers@pensando.io from MAINTAINERS and add new include dir - include dynamic_debug.h in adminq.c to protect dynamic_hex_dump() - fixed fw_slot type from u8 to int for handling error returns - fixed comment spelling - changed void arg in pdsc_adminq_post() to struct pdsc * v9: Link: https://lore.kernel.org/netdev/20230406234143.11318-1-shannon.nelson@amd.com/ - change pdsc field name id to uid to clarify the unique id used for aux device - remove unnecessary pf->state and other checks in aux device creation - hardcode fw slotnames for devlink info, don't use strings from FW - handle errors from PDS_CORE_CMD_INIT devcmd call - tighten up health thread use of config_lock - remove pdsc_queue_health_check() layer over queuing health check - start pds_core.rst file in first patch, add to it incrementally - give more user interaction info in commit messages - removed a few more extraneous includes v8: Link: https://lore.kernel.org/netdev/20230330234628.14627-1-shannon.nelson@amd.com/ - fixed deadlock problem, use devl_health_reporter_destroy() when devlink is locked - don't clear client_id until after auxiliary_device_uninit() v7: Link: https://lore.kernel.org/netdev/20230330192313.62018-1-shannon.nelson@amd.com/ - use explicit devlink locking and devl_* APIs - move some of devlink setup logic into probe and remove - use debugfs_create_u{type}() for state and queue head and tail - add include for linux/vmalloc.h Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303260420.Tgq0qobF-lkp@intel.com/ v6: Link: https://lore.kernel.org/netdev/20230324190243.27722-1-shannon.nelson@amd.com/ - removed version.h include noticed by kernel test robot's version check Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303230742.pX3ply0t-lkp@intel.com/ - fixed up the more egregious checkpatch line length complaints - make sure pdsc_auxbus_dev_register() checks padev pointer errcode v5: Link: https://lore.kernel.org/netdev/20230322185626.38758-1-shannon.nelson@amd.com/ - added devlink health reporter for FW issues - removed asic_type, asic_rev, serial_num, fw_version from debugfs as they are available through other means - trimed OS info in pdsc_identify(), we don't need to send that much info to the FW - removed reg/unreg from auxbus client API, they are now in the core when VF is started - removed need for pdsc definition in client by simplifying the padev to only carry struct pci_dev pointers rather than full struct pdsc to the pf and vf - removed the unused pdsc argument in pdsc_notify() - moved include/linux/pds/pds_core.h to driver/../pds_core/core.h - restored a few pds_core_if.h interface values and structs that are shared with FW source - moved final config_lock unlock to before tear down of timer and workqueue to be sure there are no deadlocks while waiting for any stragglers - changed use of PAGE_SIZE to local PDS_PAGE_SIZE to keep with FW layout needs without regard to kernel PAGE_SIZE configuration - removed the redundant *adminqcq argument from pdsc_adminq_post() v4: Link: https://lore.kernel.org/netdev/20230308051310.12544-1-shannon.nelson@amd.com/ - reworked to attach to both Core PF and vDPA VF PCI devices - now creates auxiliary_device as part of each VF PCI probe, removes them on PCI remove - auxiliary devices now use simple unique id rather than PCI address for identifier - replaced home-grown event publishing with kernel-based notifier service - dropped live_migration parameter, not needed when not creating aux device for it - replaced devm_* functions with traditional interfaces - added MAINTAINERS entry - removed lingering traces of set/get_vf attribute adminq commands - trimmed some include lists - cleaned a kernel test robot complaint about a stray unused variable Link: https://lore.kernel.org/oe-kbuild-all/202302181049.yeUQMeWY-lkp@intel.com/ v3: Link: https://lore.kernel.org/netdev/20230217225558.19837-1-shannon.nelson@amd.com/ - changed names from "pensando" to "amd" and updated copyright strings - dropped the DEVLINK_PARAM_GENERIC_ID_FW_BANK for future development - changed the auxiliary device creation to be triggered by the PCI bus event BOUND_DRIVER, and torn down at UNBIND_DRIVER in order to properly handle users using the sysfs bind/unbind functions - dropped some noisy log messages - rebased to current net-next RFC to v2: Link: https://lore.kernel.org/netdev/20221207004443.33779-1-shannon.nelson@amd.com/ - added separate devlink param patches for DEVLINK_PARAM_GENERIC_ID_ENABLE_MIGRATION and DEVLINK_PARAM_GENERIC_ID_FW_BANK, and dropped the driver specific implementations - updated descriptions for the new devlink parameters - dropped netdev support - dropped vDPA patches, will followup later - separated fw update and fw bank select into their own patches RFC: Link: https://lore.kernel.org/netdev/20221118225656.48309-1-snelson@pensando.io/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: Kconfig and pds_core.rstShannon Nelson
Remaining documentation and Kconfig hook for building the driver. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: publish events to the clientsShannon Nelson
When the Core device gets an event from the device, or notices the device FW to be up or down, it needs to send those events on to the clients that have an event handler. Add the code to pass along the events to the clients. The entry points pdsc_register_notify() and pdsc_unregister_notify() are EXPORTed for other drivers that want to listen for these events. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: add the aux client APIShannon Nelson
Add the client API operations for running adminq commands. The core registers the client with the FW, then the client has a context for requesting adminq services. We expect to add additional operations for other clients, including requesting additional private adminqs and IRQs, but don't have the need yet. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: devlink params for enabling VIF supportShannon Nelson
Add the devlink parameter switches so the user can enable the features supported by the VFs. The only feature supported at the moment is vDPA. Example: devlink dev param set pci/0000:2b:00.0 \ name enable_vnet cmode runtime value true Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: add auxiliary_bus devicesShannon Nelson
An auxiliary_bus device is created for each vDPA type VF at VF probe and destroyed at VF remove. The aux device name comes from the driver name + VIF type + the unique id assigned at PCI probe. The VFs are always removed on PF remove, so there should be no issues with VFs trying to access missing PF structures. The auxiliary_device names will look like "pds_core.vDPA.nn" where 'nn' is the VF's uid. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: add initial VF device handlingShannon Nelson
This is the initial VF PCI driver framework for the new pds_vdpa VF device, which will work in conjunction with an auxiliary_bus client of the pds_core driver. This does the very basics of registering for the new VF device, setting up debugfs entries, and registering with devlink. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: set up the VIF definitions and defaultsShannon Nelson
The Virtual Interfaces (VIFs) supported by the DSC's configuration (vDPA, Eth, RDMA, etc) are reported in the dev_ident struct and made visible in debugfs. At this point only vDPA is supported in this driver so we only setup devices for that feature. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: add FW update feature to devlinkShannon Nelson
Add in the support for doing firmware updates. Of the two main banks available, a and b, this updates the one not in use and then selects it for the next boot. Example: devlink dev flash pci/0000:b2:00.0 \ file pensando/dsc_fw_1.63.0-22.tar Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: Add adminq processing and commandsShannon Nelson
Add the service routines for submitting and processing the adminq messages and for handling notifyq events. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: set up device and adminqShannon Nelson
Set up the basic adminq and notifyq queue structures. These are used mostly by the client drivers for feature configuration. These are essentially the same adminq and notifyq as in the ionic driver. Part of this includes querying for device identity and FW information, so we can make that available to devlink dev info. $ devlink dev info pci/0000:b5:00.0 pci/0000:b5:00.0: driver pds_core serial_number FLM18420073 versions: fixed: asic.id 0x0 asic.rev 0x0 running: fw 1.51.0-73 stored: fw.goldfw 1.15.9-C-22 fw.mainfwa 1.60.0-73 fw.mainfwb 1.60.0-57 Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: add devlink health facilitiesShannon Nelson
Add devlink health reporting on top of our fw watchdog. Example: # devlink health show pci/0000:2b:00.0 reporter fw pci/0000:2b:00.0: reporter fw state healthy error 0 recover 0 # devlink health diagnose pci/0000:2b:00.0 reporter fw Status: healthy State: 1 Generation: 0 Recoveries: 0 Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 12:17:28 +0000