| Age | Commit message (Collapse) | Author |
|---|
|
The variable rc is being assigned a value that is never read,
the assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The switch to go through blkdev_get_by_dev means we now ignore the
return value from bdev_disk_changed in __blkdev_get. Add a manual
check to restore the old semantics.
Fixes: 4601b4b130de ("block: reopen the device in blkdev_reread_part")
Reported-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210421160502.447418-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
dimgrey_cavefish has similar gc_10_3 ip with sienna_cichlid,
so follow its registers offset setting.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Accept non-linear buffers which use a multi-planar format, as long
as they don't use DCC.
Tested on GFX9 with NV12.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
Current list supports modifiers that have DCC_MAX_COMPRESSED_BLOCK
set to AMD_FMT_MOD_DCC_BLOCK_128B, while AMD_FMT_MOD_DCC_BLOCK_64B
is used instead by userspace.
[How]
Replace AMD_FMT_MOD_DCC_BLOCK_128B with AMD_FMT_MOD_DCC_BLOCK_64B
for modifiers with DCC supported.
Fixes: faa37f54ce0462 ("drm/amd/display: Expose modifiers")
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Forgot to reserve a fence slot to use sdma to update page table, cause
below kernel BUG backtrace to handle vm retry fault while application is
exiting.
[ 133.048143] kernel BUG at /home/yangp/git/compute_staging/kernel/drivers/dma-buf/dma-resv.c:281!
[ 133.048487] Workqueue: events amdgpu_irq_handle_ih1 [amdgpu]
[ 133.048506] RIP: 0010:dma_resv_add_shared_fence+0x204/0x280
[ 133.048672] amdgpu_vm_sdma_commit+0x134/0x220 [amdgpu]
[ 133.048788] amdgpu_vm_bo_update_range+0x220/0x250 [amdgpu]
[ 133.048905] amdgpu_vm_handle_fault+0x202/0x370 [amdgpu]
[ 133.049031] gmc_v9_0_process_interrupt+0x1ab/0x310 [amdgpu]
[ 133.049165] ? kgd2kfd_interrupt+0x9a/0x180 [amdgpu]
[ 133.049289] ? amdgpu_irq_dispatch+0xb6/0x240 [amdgpu]
[ 133.049408] amdgpu_irq_dispatch+0xb6/0x240 [amdgpu]
[ 133.049534] amdgpu_ih_process+0x9b/0x1c0 [amdgpu]
[ 133.049657] amdgpu_irq_handle_ih1+0x21/0x60 [amdgpu]
[ 133.049669] process_one_work+0x29f/0x640
[ 133.049678] worker_thread+0x39/0x3f0
[ 133.049685] ? process_one_work+0x640/0x640
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.11.x
|
|
'for_each_available_child_of_node' performs an of_node_get on each
iteration, so a return from the middle of the loop requires an of_node_put.
Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/504e431b900341249d331b868d90312cf41f415a.1618947919.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Each time we call spi_get_gpio_descs() the num_chipselect is overwritten
either by new value or by the old one. This is an extra operation in case
gpiod_count() returns an error. Besides that it slashes the error handling
of gpiod_count().
Refactor the code to make error handling of gpiod_count() call cleaner.
Note, that gpiod_count() never returns 0, take this into account as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210420164040.40055-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
s/regulator may on/regulator may already be enabled/
s/or left on/or was left on/
The aim of this patch is to make the comment more readable and to make
it clear, that this is about a regulator, that is already enabled instead
of a regulator that may be switched on.
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Link: https://lore.kernel.org/r/20210421055236.13148-1-sebastian.fricke@posteo.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'for_each_available_child_of_node()' already performs an 'of_node_get()'
on child, so there is no need to perform another one before returning.
Otherwise, a double 'get' is performed and a resource may never be
released.
Fixes: 925c85e21ed8 ("regulator: Factor out location of init data OF node")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/a79f0068812b89ff412d572a1171f22109c24132.1618947049.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Shifted the closing */ of multiline comment to a new line
This is done to maintain code uniformity
Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com>
Link: https://lore.kernel.org/r/20210420034718.t7wudu6xcfpahflv@kewl-virtual-machine
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
None of the platforms with S2MPS11 use board files, so any
initialization via platform data can be safely removed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210420170244.13467-5-krzysztof.kozlowski@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
None of the platforms with S2MPA01 use board files, so any
initialization via platform data can be safely removed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210420170244.13467-4-krzysztof.kozlowski@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch fixes identification of DA913x parts by the DA9121 driver,
where a lack of clarity lead to implementation on the basis that variant
IDs were to be identical to the equivalent rated non-automotive parts.
There is a new emphasis on the DT identity to cope with overlap in these
ID's - this is not considered to be problematic, because projects would
be exclusively using automotive or consumer grade parts.
Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com>
Link: https://lore.kernel.org/r/20210421120306.DB5B880007F@slsrvapps-01.diasemi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As we are using cpu_pm to save and restore context, we must also save and
restore the GPIO sysconfig register. This is needed because we are not
calling PM runtime functions at all with cpu_pm.
We need to save the sysconfig on idle as it's value can get reconfigured by
PM runtime and can be different from the init time value. Device specific
flags like "ti,no-idle-on-init" can affect the init value.
Fixes: b764a5863fd8 ("gpio: omap: Remove custom PM calls and use cpu_pm instead")
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
|
The driver now fails to build without ACPI:
drivers/platform/x86/intel_pmc_core.c: In function 'pmc_core_get_tgl_lpm_reqs':
drivers/platform/x86/intel_pmc_core.c:617:41: error: invalid use of undefined type 'struct acpi_device'
617 | out_obj = acpi_evaluate_dsm(adev->handle, &s0ix_dsm_guid, 0,
This could probably be made optional, but it won't be used without
ACPI in practice, so just add a Kconfig dependency.
Fixes: 428131364f00 ("platform/x86: intel_pmc_core: Get LPM requirements for Tiger Lake")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210421134957.3329062-1-arnd@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
There may be a kernel panic on the Haswell server and the Broadwell
server, if the snbep_pci2phy_map_init() return error.
The uncore_extra_pci_dev[HSWEP_PCI_PCU_3] is used in the cpu_init() to
detect the existence of the SBOX, which is a MSR type of PMON unit.
The uncore_extra_pci_dev is allocated in the uncore_pci_init(). If the
snbep_pci2phy_map_init() returns error, perf doesn't initialize the
PCI type of the PMON units, so the uncore_extra_pci_dev will not be
allocated. But perf may continue initializing the MSR type of PMON
units. A null dereference kernel panic will be triggered.
The sockets in a Haswell server or a Broadwell server are identical.
Only need to detect the existence of the SBOX once.
Current perf probes all available PCU devices and stores them into the
uncore_extra_pci_dev. It's unnecessary.
Use the pci_get_device() to replace the uncore_extra_pci_dev. Only
detect the existence of the SBOX on the first available PCU device once.
Factor out hswep_has_limit_sbox(), since the Haswell server and the
Broadwell server uses the same way to detect the existence of the SBOX.
Add some macros to replace the magic number.
Fixes: 5306c31c5733 ("perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes")
Reported-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lkml.kernel.org/r/1618521764-100923-1-git-send-email-kan.liang@linux.intel.com
|
|
Current ebpf disassembly buffer size of 64 is too small. E.g. this line
takes 65 bytes:
01fffff8005822e: ec8100ed8065\tclgrj\t%r8,%r1,8,001fffff80058408\n\0
Double the buffer size like it is done for the kernel disassembly buffer.
Fixes the following KASAN finding:
UG: KASAN: stack-out-of-bounds in print_fn_code+0x34c/0x380
Write of size 1 at addr 001fff800ad5f970 by task test_progs/853
CPU: 53 PID: 853 Comm: test_progs Not tainted
5.12.0-rc7-23786-g23457d86b1f0-dirty #19
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
[<0000000cd8e0538a>] show_stack+0x17a/0x1668
[<0000000cd8e2a5d8>] dump_stack+0x140/0x1b8
[<0000000cd8e16e74>] print_address_description.constprop.0+0x54/0x260
[<0000000cd75a8698>] kasan_report+0xc8/0x130
[<0000000cd6e26da4>] print_fn_code+0x34c/0x380
[<0000000cd6ea0f4e>] bpf_int_jit_compile+0xe3e/0xe58
[<0000000cd72c4c88>] bpf_prog_select_runtime+0x5b8/0x9c0
[<0000000cd72d1bf8>] bpf_prog_load+0xa78/0x19c0
[<0000000cd72d7ad6>] __do_sys_bpf.part.0+0x18e/0x768
[<0000000cd6e0f392>] do_syscall+0x12a/0x220
[<0000000cd8e333f8>] __do_syscall+0x98/0xc8
[<0000000cd8e54834>] system_call+0x6c/0x94
1 lock held by test_progs/853:
#0: 0000000cd9bf7460 (report_lock){....}-{2:2}, at:
kasan_report+0x96/0x130
addr 001fff800ad5f970 is located in stack of task test_progs/853 at
offset 96 in frame:
print_fn_code+0x0/0x380
this frame has 1 object:
[32, 96) 'buffer'
Memory state around the buggy address:
001fff800ad5f800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
001fff800ad5f880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>001fff800ad5f900: 00 00 f1 f1 f1 f1 00 00 00 00 00 00 00 00 f3 f3
^
001fff800ad5f980: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00
001fff800ad5fa00: 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00
Cc: <stable@vger.kernel.org>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
A review of the code showed, that this function which is exposed
within the whole kernel should do a parameter check for the
amount of bytes requested. If this requested bytes is too high
an unsigned int overflow could happen causing this function to
try to memcpy a really big memory chunk.
This is not a security issue as there are only two invocations
of this function from arch/s390/include/asm/archrandom.h and both
are not exposed to userland.
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Tests with kvm and a kmemdebug kernel showed, that on hot unplug the
zcard and zqueue structs for the unplugged card or queue are not
properly freed because of a mismatch with get/put for the embedded
kref counter.
This fix now adjusts the handling of the kref counters. With init the
kref counter starts with 1. This initial value needs to drop to zero
with the unregister of the card or queue to trigger the release and
free the object.
Fixes: 29c2680fd2bf ("s390/ap: fix ap devices reference counting")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Cc: stable@vger.kernel.org
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
There is not a consistent pattern for checking Hyper-V hypercall status.
Existing code uses a number of variants. The variants work, but a consistent
pattern would improve the readability of the code, and be more conformant
to what the Hyper-V TLFS says about hypercall status.
Implemented new helper functions hv_result(), hv_result_success(), and
hv_repcomp(). Changed the places where hv_do_hypercall() and related variants
are used to use the helper functions.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1618620183-9967-2-git-send-email-joseph.salisbury@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
This patch makes no functional changes. It simply moves hv_do_rep_hypercall()
out of arch/x86/include/asm/mshyperv.h and into asm-generic/mshyperv.h
hv_do_rep_hypercall() is architecture independent, so it makes sense that it
should be in the architecture independent mshyperv.h, not in the x86-specific
mshyperv.h.
This is done in preperation for a follow up patch which creates a consistent
pattern for checking Hyper-V hypercall status.
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1618620183-9967-1-git-send-email-joseph.salisbury@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
This patch add zh_CN/openrisc to zh_CN/index.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/162fb50638028c9b0a92a0ce5c53e691be0cfec2.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This patch translates Documentation/openrisc/index.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/f3878525e0d5f94a9c541f5ec8fd31b44a6dc5cd.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This patch translates Documentation/openrisc/todo.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/daf5b352ba62a4737148d524bcae0e64756ed6da.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This patch tranlates Documentation/openrisc/openrisc_port.rst into Chinese
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/e116b3020dfd181c15a59ecf41673cd4dbeea3b2.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This patch add zh_CN/core-api to zh_CN/index.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/f23ea90fe88a6ac34d29c6642abe9aceba7ccafb.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This patch translates Documentation/core-api/index.rst into Chinese.
add Documentation/translations/zh_CN/core-api/irq/* to zh_CN/core-api/index.rst.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/d246fcd092111338d64f6b678dda2cd67fcb3f4a.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This patch translates Documentation/core-api/irq/index.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/f6f2edfa645badfdd29122bee3ff0c9577197691.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This patch translates Documentation/core-api/irq/irqflags-tracing.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/deb4b3649d7001f7505672cf45813f0064c9a8d0.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This patch translates Documentation/core-api/irq/irq-domain.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/86e44d36315228408c8bd97360041a9f59a85462.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This patch translates Documentation/core-api/irq/irq-affinity.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/d235db96434baf472441877fc8ffca0f6f70a9f5.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This patch translates Documentation/core-api/irq/concepts.rst into Chinese.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Wu XiangCheng <bobwxc@email.cn>
Link: https://lore.kernel.org/r/22babdd7e3fa5121360eff875d005ba5f4647e21.1618568135.git.siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix tp_printk command line and trace events
Masami added a wrapper to be able to unhash trace event pointers as
they are only read by root anyway, and they can also be extracted by
the raw trace data buffers. But this wrapper utilized the iterator to
have a temporary buffer to manipulate the text with.
tp_printk is a kernel command line option that will send the trace
output of a trace event to the console on boot up (useful when the
system crashes before finishing the boot). But the code used the same
wrapper that Masami added, and its iterator did not have a buffer, and
this caused the system to crash.
Have the wrapper just print the trace event normally if the iterator
has no temporary buffer"
* tag 'trace-v5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix checking event hash pointer logic when tp_printk is enabled
|
|
cap_setfcap is required to create file capabilities.
Since commit 8db6c34f1dbc ("Introduce v3 namespaced file capabilities"),
a process running as uid 0 but without cap_setfcap is able to work
around this as follows: unshare a new user namespace which maps parent
uid 0 into the child namespace.
While this task will not have new capabilities against the parent
namespace, there is a loophole due to the way namespaced file
capabilities are represented as xattrs. File capabilities valid in
userns 1 are distinguished from file capabilities valid in userns 2 by
the kuid which underlies uid 0. Therefore the restricted root process
can unshare a new self-mapping namespace, add a namespaced file
capability onto a file, then use that file capability in the parent
namespace.
To prevent that, do not allow mapping parent uid 0 if the process which
opened the uid_map file does not have CAP_SETFCAP, which is the
capability for setting file capabilities.
As a further wrinkle: a task can unshare its user namespace, then open
its uid_map file itself, and map (only) its own uid. In this case we do
not have the credential from before unshare, which was potentially more
restricted. So, when creating a user namespace, we record whether the
creator had CAP_SETFCAP. Then we can use that during map_write().
With this patch:
1. Unprivileged user can still unshare -Ur
ubuntu@caps:~$ unshare -Ur
root@caps:~# logout
2. Root user can still unshare -Ur
ubuntu@caps:~$ sudo bash
root@caps:/home/ubuntu# unshare -Ur
root@caps:/home/ubuntu# logout
3. Root user without CAP_SETFCAP cannot unshare -Ur:
root@caps:/home/ubuntu# /sbin/capsh --drop=cap_setfcap --
root@caps:/home/ubuntu# /sbin/setcap cap_setfcap=p /sbin/setcap
unable to set CAP_SETFCAP effective capability: Operation not permitted
root@caps:/home/ubuntu# unshare -Ur
unshare: write failed /proc/self/uid_map: Operation not permitted
Note: an alternative solution would be to allow uid 0 mappings by
processes without CAP_SETFCAP, but to prevent such a namespace from
writing any file capabilities. This approach can be seen at [1].
Background history: commit 95ebabde382 ("capabilities: Don't allow
writing ambiguous v3 file capabilities") tried to fix the issue by
preventing v3 fscaps to be written to disk when the root uid would map
to the same uid in nested user namespaces. This led to regressions for
various workloads. For example, see [2]. Ultimately this is a valid
use-case we have to support meaning we had to revert this change in
3b0c2d3eaa83 ("Revert 95ebabde382c ("capabilities: Don't allow writing
ambiguous v3 file capabilities")").
Link: https://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux.git/log/?h=2021-04-15/setfcap-nsfscaps-v4 [1]
Link: https://github.com/containers/buildah/issues/3071 [2]
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Andrew G. Morgan <morgan@kernel.org>
Tested-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Due to a full ring buffer, the driver may be unable to send updates to
the Hyper-V host. But outputing the error message can make the problem
worse because console output is also typically written to the frame
buffer. As a result, in some circumstances the error message is output
continuously.
Break the cycle by rate limiting the error message. Also output
the error code for additional diagnosability.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1618933459-10585-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
When running in Azure, disks may be connected to a Linux VM with
read/write caching enabled. If a VM panics and issues a VMbus
UNLOAD request to Hyper-V, the response is delayed until all dirty
data in the disk cache is flushed. In extreme cases, this flushing
can take 10's of seconds, depending on the disk speed and the amount
of dirty data. If kdump is configured for the VM, the current 10 second
timeout in vmbus_wait_for_unload() may be exceeded, and the UNLOAD
complete message may arrive well after the kdump kernel is already
running, causing problems. Note that no problem occurs if kdump is
not enabled because Hyper-V waits for the cache flush before doing
a reboot through the BIOS/UEFI code.
Fix this problem by increasing the timeout in vmbus_wait_for_unload()
to 100 seconds. Also output periodic messages so that if anyone is
watching the serial console, they won't think the VM is completely
hung.
Fixes: 911e1987efc8 ("Drivers: hv: vmbus: Add timeout to vmbus_wait_for_unload")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/1618894089-126662-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
If a malicious or compromised Hyper-V sends a spurious message of type
CHANNELMSG_UNLOAD_RESPONSE, the function vmbus_unload_response() will
call complete() on an uninitialized event, and cause an oops.
Reported-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210420014350.2002-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
When a file gets deleted on a zoned file system, the space freed is not
returned back into the block group's free space, but is migrated to
zone_unusable.
As this zone_unusable space is behind the current write pointer it is not
possible to use it for new allocations. In the current implementation a
zone is reset once all of the block group's space is accounted as zone
unusable.
This behaviour can lead to premature ENOSPC errors on a busy file system.
Instead of only reclaiming the zone once it is completely unusable,
kick off a reclaim job once the amount of unusable bytes exceeds a user
configurable threshold between 51% and 100%. It can be set per mounted
filesystem via the sysfs tunable bg_reclaim_threshold which is set to 75%
by default.
Similar to reclaiming unused block groups, these dirty block groups are
added to a to_reclaim list and then on a transaction commit, the reclaim
process is triggered but after we deleted unused block groups, which will
free space for the relocation process.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
matthew.gerlach@linux.intel.com
Matthew Gerlach <matthew.gerlach@linux.intel.com>:
From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
This patch set adds Device Feature List (DFL) bus support for
the Altera SPI Master controller.
Patch 1 separates spi-altera.c into spi-altera-core.c and
spi-altera-platform.c.
Patch 2 adds spi-altera-dfl.c.
Matthew Gerlach (2):
spi: altera: separate core code from platform code
spi: altera: Add DFL bus driver for Altera API Controller
drivers/spi/Kconfig | 18 +-
drivers/spi/Makefile | 4 +-
drivers/spi/spi-altera-core.c | 222 ++++++++++++++++++++++
drivers/spi/spi-altera-dfl.c | 204 ++++++++++++++++++++
drivers/spi/spi-altera-platform.c | 172 +++++++++++++++++
drivers/spi/spi-altera.c | 378 --------------------------------------
include/linux/spi/altera.h | 21 +++
7 files changed, 639 insertions(+), 380 deletions(-)
create mode 100644 drivers/spi/spi-altera-core.c
create mode 100644 drivers/spi/spi-altera-dfl.c
create mode 100644 drivers/spi/spi-altera-platform.c
delete mode 100644 drivers/spi/spi-altera.c
--
1.8.3.1
|
|
As a preparation for extending the block group deletion use case, rename
the unused_bgs_mutex to reclaim_bgs_lock.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When relocating a block group the freed up space is not discarded in one
big block, but each extent is discarded on its own with -odisard=sync.
For a zoned filesystem we need to discard the whole block group at once,
so btrfs_discard_extent() will translate the discard into a
REQ_OP_ZONE_RESET operation, which then resets the device's zone.
Failure to reset the zone is not fatal error.
Discussion about the approach and regarding transaction blocking:
https://lore.kernel.org/linux-btrfs/CAL3q7H4SjS_d5rBepfTMhU8Th3bJzdmyYd0g4Z60yUgC_rC_ZA@mail.gmail.com/
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Btrfs uses internally mapped u64 address space for all its metadata.
Due to the page cache limit on 32bit systems, btrfs can't access
metadata at or beyond (ULONG_MAX + 1) << PAGE_SHIFT. See
how MAX_LFS_FILESIZE and page::index are defined. This is 16T for 4K
page size while 256T for 64K page size.
Users can have a filesystem which doesn't have metadata beyond the
boundary at mount time, but later balance can cause it to create
metadata beyond the boundary.
And modification to MM layer is unrealistic just for such minor use
case. We can't do more than to prevent mounting such filesystem or warn
early when the numbers are still within the limits.
To address such problem, this patch will introduce the following checks:
- Mount time rejection
This will reject any fs which has metadata chunk at or beyond the
boundary.
- Mount time early warning
If there is any metadata chunk beyond 5/8th of the boundary, we do an
early warning and hope the end user will see it.
- Runtime extent buffer rejection
If we're going to allocate an extent buffer at or beyond the boundary,
reject such request with EOVERFLOW.
This is definitely going to cause problems like transaction abort, but
we have no better ways.
- Runtime extent buffer early warning
If an extent buffer beyond 5/8th of the max file size is allocated, do
an early warning.
Above error/warning message will only be printed once for each fs to
reduce dmesg flood.
If the mount is rejected, the filesystem will be mountable only on a
64bit host.
Link: https://lore.kernel.org/linux-btrfs/1783f16d-7a28-80e6-4c32-fdf19b705ed0@gmx.com/
Reported-by: Erik Jensen <erikjensen@rkjnsn.net>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Although 'ret' has been initialized to -1, but it will be reassigned by
the "ret = open(...)" statement in the for loop. So that, the value of
'ret' is unknown when asprintf() failed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210415083417.3740-1-thunder.leizhen@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When doing a device replace on a zoned filesystem, if we find a block
group with ->to_copy == 0, we jump to the label 'done', which will result
in later calling btrfs_unfreeze_block_group(), even though at this point
we never called btrfs_freeze_block_group().
Since at this point we have neither turned the block group to RO mode nor
made any progress, we don't need to jump to the label 'done'. So fix this
by jumping instead to the label 'skip' and dropping our reference on the
block group before the jump.
Fixes: 78ce9fc269af6e ("btrfs: zoned: mark block groups to copy for device-replace")
CC: stable@vger.kernel.org # 5.12
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit dbcc7d57bffc0c ("btrfs: fix race when cloning extent buffer during
rewind of an old root"), fixed a race when we need to rewind the extent
buffer of an old root. It was caused by picking a new mod log operation
for the extent buffer while getting a cloned extent buffer with an outdated
number of items (off by -1), because we cloned the extent buffer without
locking it first.
However there is still another similar race, but in the opposite direction.
The cloned extent buffer has a number of items that does not match the
number of tree mod log operations that are going to be replayed. This is
because right after we got the last (most recent) tree mod log operation to
replay and before locking and cloning the extent buffer, another task adds
a new pointer to the extent buffer, which results in adding a new tree mod
log operation and incrementing the number of items in the extent buffer.
So after cloning we have mismatch between the number of items in the extent
buffer and the number of mod log operations we are going to apply to it.
This results in hitting a BUG_ON() that produces the following stack trace:
------------[ cut here ]------------
kernel BUG at fs/btrfs/tree-mod-log.c:675!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 3 PID: 4811 Comm: crawl_1215 Tainted: G W 5.12.0-7d1efdf501f8-misc-next+ #99
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:tree_mod_log_rewind+0x3b1/0x3c0
Code: 05 48 8d 74 10 (...)
RSP: 0018:ffffc90001027090 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff8880a8514600 RCX: ffffffffaa9e59b6
RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8880a851462c
RBP: ffffc900010270e0 R08: 00000000000000c0 R09: ffffed1004333417
R10: ffff88802199a0b7 R11: ffffed1004333416 R12: 000000000000000e
R13: ffff888135af8748 R14: ffff88818766ff00 R15: ffff8880a851462c
FS: 00007f29acf62700(0000) GS:ffff8881f2200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0e6013f718 CR3: 000000010d42e003 CR4: 0000000000170ee0
Call Trace:
btrfs_get_old_root+0x16a/0x5c0
? lock_downgrade+0x400/0x400
btrfs_search_old_slot+0x192/0x520
? btrfs_search_slot+0x1090/0x1090
? free_extent_buffer.part.61+0xd7/0x140
? free_extent_buffer+0x13/0x20
resolve_indirect_refs+0x3e9/0xfc0
? lock_downgrade+0x400/0x400
? __kasan_check_read+0x11/0x20
? add_prelim_ref.part.11+0x150/0x150
? lock_downgrade+0x400/0x400
? __kasan_check_read+0x11/0x20
? lock_acquired+0xbb/0x620
? __kasan_check_write+0x14/0x20
? do_raw_spin_unlock+0xa8/0x140
? rb_insert_color+0x340/0x360
? prelim_ref_insert+0x12d/0x430
find_parent_nodes+0x5c3/0x1830
? stack_trace_save+0x87/0xb0
? resolve_indirect_refs+0xfc0/0xfc0
? fs_reclaim_acquire+0x67/0xf0
? __kasan_check_read+0x11/0x20
? lockdep_hardirqs_on_prepare+0x210/0x210
? fs_reclaim_acquire+0x67/0xf0
? __kasan_check_read+0x11/0x20
? ___might_sleep+0x10f/0x1e0
? __kasan_kmalloc+0x9d/0xd0
? trace_hardirqs_on+0x55/0x120
btrfs_find_all_roots_safe+0x142/0x1e0
? find_parent_nodes+0x1830/0x1830
? trace_hardirqs_on+0x55/0x120
? ulist_free+0x1f/0x30
? btrfs_inode_flags_to_xflags+0x50/0x50
iterate_extent_inodes+0x20e/0x580
? tree_backref_for_extent+0x230/0x230
? release_extent_buffer+0x225/0x280
? read_extent_buffer+0xdd/0x110
? lock_downgrade+0x400/0x400
? __kasan_check_read+0x11/0x20
? lock_acquired+0xbb/0x620
? __kasan_check_write+0x14/0x20
? do_raw_spin_unlock+0xa8/0x140
? _raw_spin_unlock+0x22/0x30
? release_extent_buffer+0x225/0x280
iterate_inodes_from_logical+0x129/0x170
? iterate_inodes_from_logical+0x129/0x170
? btrfs_inode_flags_to_xflags+0x50/0x50
? iterate_extent_inodes+0x580/0x580
? __vmalloc_node+0x92/0xb0
? init_data_container+0x34/0xb0
? init_data_container+0x34/0xb0
? kvmalloc_node+0x60/0x80
btrfs_ioctl_logical_to_ino+0x158/0x230
btrfs_ioctl+0x2038/0x4360
? __kasan_check_write+0x14/0x20
? mmput+0x3b/0x220
? btrfs_ioctl_get_supported_features+0x30/0x30
? __kasan_check_read+0x11/0x20
? __kasan_check_read+0x11/0x20
? lock_release+0xc8/0x650
? __might_fault+0x64/0xd0
? __kasan_check_read+0x11/0x20
? lock_downgrade+0x400/0x400
? lockdep_hardirqs_on_prepare+0x210/0x210
? lockdep_hardirqs_on_prepare+0x13/0x210
? _raw_spin_unlock_irqrestore+0x51/0x63
? __kasan_check_read+0x11/0x20
? do_vfs_ioctl+0xfc/0x9d0
? ioctl_file_clone+0xe0/0xe0
? lock_downgrade+0x400/0x400
? lockdep_hardirqs_on_prepare+0x210/0x210
? __kasan_check_read+0x11/0x20
? lock_release+0xc8/0x650
? __task_pid_nr_ns+0xd3/0x250
? __kasan_check_read+0x11/0x20
? __fget_files+0x160/0x230
? __fget_light+0xf2/0x110
__x64_sys_ioctl+0xc3/0x100
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f29ae85b427
Code: 00 00 90 48 8b (...)
RSP: 002b:00007f29acf5fcf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f29acf5ff40 RCX: 00007f29ae85b427
RDX: 00007f29acf5ff48 RSI: 00000000c038943b RDI: 0000000000000003
RBP: 0000000001000000 R08: 0000000000000000 R09: 00007f29acf60120
R10: 00005640d5fc7b00 R11: 0000000000000246 R12: 0000000000000003
R13: 00007f29acf5ff48 R14: 00007f29acf5ff40 R15: 00007f29acf5fef8
Modules linked in:
---[ end trace 85e5fce078dfbe04 ]---
(gdb) l *(tree_mod_log_rewind+0x3b1)
0xffffffff819e5b21 is in tree_mod_log_rewind (fs/btrfs/tree-mod-log.c:675).
670 * the modification. As we're going backwards, we do the
671 * opposite of each operation here.
672 */
673 switch (tm->op) {
674 case BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING:
675 BUG_ON(tm->slot < n);
676 fallthrough;
677 case BTRFS_MOD_LOG_KEY_REMOVE_WHILE_MOVING:
678 case BTRFS_MOD_LOG_KEY_REMOVE:
679 btrfs_set_node_key(eb, &tm->key, tm->slot);
(gdb) quit
The following steps explain in more detail how it happens:
1) We have one tree mod log user (through fiemap or the logical ino ioctl),
with a sequence number of 1, so we have fs_info->tree_mod_seq == 1.
This is task A;
2) Another task is at ctree.c:balance_level() and we have eb X currently as
the root of the tree, and we promote its single child, eb Y, as the new
root.
Then, at ctree.c:balance_level(), we call:
ret = btrfs_tree_mod_log_insert_root(root->node, child, true);
3) At btrfs_tree_mod_log_insert_root() we create a tree mod log operation
of type BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING, with a ->logical field
pointing to ebX->start. We only have one item in eb X, so we create
only one tree mod log operation, and store in the "tm_list" array;
4) Then, still at btrfs_tree_mod_log_insert_root(), we create a tree mod
log element of operation type BTRFS_MOD_LOG_ROOT_REPLACE, ->logical set
to ebY->start, ->old_root.logical set to ebX->start, ->old_root.level
set to the level of eb X and ->generation set to the generation of eb X;
5) Then btrfs_tree_mod_log_insert_root() calls tree_mod_log_free_eb() with
"tm_list" as argument. After that, tree_mod_log_free_eb() calls
tree_mod_log_insert(). This inserts the mod log operation of type
BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING from step 3 into the rbtree
with a sequence number of 2 (and fs_info->tree_mod_seq set to 2);
6) Then, after inserting the "tm_list" single element into the tree mod
log rbtree, the BTRFS_MOD_LOG_ROOT_REPLACE element is inserted, which
gets the sequence number 3 (and fs_info->tree_mod_seq set to 3);
7) Back to ctree.c:balance_level(), we free eb X by calling
btrfs_free_tree_block() on it. Because eb X was created in the current
transaction, has no other references and writeback did not happen for
it, we add it back to the free space cache/tree;
8) Later some other task B allocates the metadata extent from eb X, since
it is marked as free space in the space cache/tree, and uses it as a
node for some other btree;
9) The tree mod log user task calls btrfs_search_old_slot(), which calls
btrfs_get_old_root(), and finally that calls tree_mod_log_oldest_root()
with time_seq == 1 and eb_root == eb Y;
10) The first iteration of the while loop finds the tree mod log element
with sequence number 3, for the logical address of eb Y and of type
BTRFS_MOD_LOG_ROOT_REPLACE;
11) Because the operation type is BTRFS_MOD_LOG_ROOT_REPLACE, we don't
break out of the loop, and set root_logical to point to
tm->old_root.logical, which corresponds to the logical address of
eb X;
12) On the next iteration of the while loop, the call to
tree_mod_log_search_oldest() returns the smallest tree mod log element
for the logical address of eb X, which has a sequence number of 2, an
operation type of BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING and
corresponds to the old slot 0 of eb X (eb X had only 1 item in it
before being freed at step 7);
13) We then break out of the while loop and return the tree mod log
operation of type BTRFS_MOD_LOG_ROOT_REPLACE (eb Y), and not the one
for slot 0 of eb X, to btrfs_get_old_root();
14) At btrfs_get_old_root(), we process the BTRFS_MOD_LOG_ROOT_REPLACE
operation and set "logical" to the logical address of eb X, which was
the old root. We then call tree_mod_log_search() passing it the logical
address of eb X and time_seq == 1;
15) But before calling tree_mod_log_search(), task B locks eb X, adds a
key to eb X, which results in adding a tree mod log operation of type
BTRFS_MOD_LOG_KEY_ADD, with a sequence number of 4, to the tree mod
log, and increments the number of items in eb X from 0 to 1.
Now fs_info->tree_mod_seq has a value of 4;
16) Task A then calls tree_mod_log_search(), which returns the most recent
tree mod log operation for eb X, which is the one just added by task B
at the previous step, with a sequence number of 4, a type of
BTRFS_MOD_LOG_KEY_ADD and for slot 0;
17) Before task A locks and clones eb X, task A adds another key to eb X,
which results in adding a new BTRFS_MOD_LOG_KEY_ADD mod log operation,
with a sequence number of 5, for slot 1 of eb X, increments the
number of items in eb X from 1 to 2, and unlocks eb X.
Now fs_info->tree_mod_seq has a value of 5;
18) Task A then locks eb X and clones it. The clone has a value of 2 for
the number of items and the pointer "tm" points to the tree mod log
operation with sequence number 4, not the most recent one with a
sequence number of 5, so there is mismatch between the number of
mod log operations that are going to be applied to the cloned version
of eb X and the number of items in the clone;
19) Task A then calls tree_mod_log_rewind() with the clone of eb X, the
tree mod log operation with sequence number 4 and a type of
BTRFS_MOD_LOG_KEY_ADD, and time_seq == 1;
20) At tree_mod_log_rewind(), we set the local variable "n" with a value
of 2, which is the number of items in the clone of eb X.
Then in the first iteration of the while loop, we process the mod log
operation with sequence number 4, which is targeted at slot 0 and has
a type of BTRFS_MOD_LOG_KEY_ADD. This results in decrementing "n" from
2 to 1.
Then we pick the next tree mod log operation for eb X, which is the
tree mod log operation with a sequence number of 2, a type of
BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING and for slot 0, it is the one
added in step 5 to the tree mod log tree.
We go back to the top of the loop to process this mod log operation,
and because its slot is 0 and "n" has a value of 1, we hit the BUG_ON:
(...)
switch (tm->op) {
case BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING:
BUG_ON(tm->slot < n);
fallthrough;
(...)
Fix this by checking for a more recent tree mod log operation after locking
and cloning the extent buffer of the old root node, and use it as the first
operation to apply to the cloned extent buffer when rewinding it.
Stable backport notes: due to moved code and renames, in =< 5.11 the
change should be applied to ctree.c:get_old_root.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/20210404040732.GZ32440@hungrycats.org/
Fixes: 834328a8493079 ("Btrfs: tree mod log's old roots could still be part of the tree")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When creating a subvolume we allocate an extent buffer for its root node
after starting a transaction. We setup a root item for the subvolume that
points to that extent buffer and then attempt to insert the root item into
the root tree - however if that fails, due to ENOMEM for example, we do
not free the extent buffer previously allocated and we do not abort the
transaction (as at that point we did nothing that can not be undone).
This means that we effectively do not return the metadata extent back to
the free space cache/tree and we leave a delayed reference for it which
causes a metadata extent item to be added to the extent tree, in the next
transaction commit, without having backreferences. When this happens
'btrfs check' reports the following:
$ btrfs check /dev/sdi
Opening filesystem to check...
Checking filesystem on /dev/sdi
UUID: dce2cb9d-025f-4b05-a4bf-cee0ad3785eb
[1/7] checking root items
[2/7] checking extents
ref mismatch on [30425088 16384] extent item 1, found 0
backref 30425088 root 256 not referenced back 0x564a91c23d70
incorrect global backref count on 30425088 found 1 wanted 0
backpointer mismatch on [30425088 16384]
owner ref check failed [30425088 16384]
ERROR: errors found in extent allocation tree or chunk allocation
[3/7] checking free space cache
[4/7] checking fs roots
[5/7] checking only csums items (without verifying data)
[6/7] checking root refs
[7/7] checking quota groups skipped (not enabled on this FS)
found 212992 bytes used, error(s) found
total csum bytes: 0
total tree bytes: 131072
total fs tree bytes: 32768
total extent tree bytes: 16384
btree space waste bytes: 124669
file data blocks allocated: 65536
referenced 65536
So fix this by freeing the metadata extent if btrfs_insert_root() returns
an error.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add compatible string for Micron SPI NOR Authenta device.
Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Link: https://lore.kernel.org/r/20210419204015.1769-1-sshivamurthy@micron.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This helps validating DTS files.
Changes that require mentioning:
1. reg-names
"mspi_regs" and "bspi_regs" were renamed to "mspi" and "bspi" as that
is what's used in DTS files and in Linux driver
2. interrupt-names
Names were reordered. "mspi_done" has to go first as it's always
required.
3. spi-rx-bus-width
Property description was dropped as it's part of the
spi-controller.yaml
4. Examples:
* drop partitions as they are well documented elsewhere
* regs and interrupts were formatted and reordered to match yaml
* <0x1c> was replaced with <&gic>
* "m25p80" node name became "flash"
* dropped invalid "m25p,fast-read" property
* dropped undocumented and Linux-unused "clock-names"
This rewritten binding validates cleanly using the "dt_binding_check".
Some Linux stored DTS files will require reordering regs and interrupts
to make dtbs_check happy.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210416194723.23855-1-zajec5@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds a Device Feature List (DFL) bus driver for the
Altera SPI Master controller. The SPI master is connected to an
Intel SPI Slave to Avalon Bridge inside an Intel MAX10
BMC Chip.
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Link: https://lore.kernel.org/r/20210416165720.554144-3-matthew.gerlach@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
