summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-18liquidio: Using NULL instead of plain integerYueHaibing
Fixes the following sparse warnings: drivers/net/ethernet/cavium/liquidio/lio_main.c:3068:23: warning: Using plain integer as NULL pointer drivers/net/ethernet/cavium/liquidio/lio_main.c:2909:23: warning: Using plain integer as NULL pointer drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c:385:27: warning: Using plain integer as NULL pointer Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18PCI: OF: Fix I/O space page leakSergei Shtylyov
When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. Introduce the devm_pci_remap_iospace() managed API and replace the pci_remap_iospace() call with it to fix the bug. Fixes: dbf9826d5797 ("PCI: generic: Convert to DT resource parsing API") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> [lorenzo.pieralisi@arm.com: split commit/updated the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-18net/mlx5: fix an unused-function warningArnd Bergmann
These dummy helpers are all intended to be inline functions, but one of them by accident came without the 'inline' keyword, causing a harmless warning: In file included from drivers/net/ethernet/mellanox/mlx5/core/main.c:63: drivers/net/ethernet/mellanox/mlx5/core/accel/tls.h:79:1: error: 'mlx5_accel_tls_add_flow' defined but not used [-Werror=unused-function] mlx5_accel_tls_add_flow(struct mlx5_core_dev *mdev, void *flow, Fixes: ab412e1dd7db ("net/mlx5: Accel, add TLS rx offload routines") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18xdp: fix uninitialized 'err' variableJakub Kicinski
Smatch caught an uninitialized variable error which GCC seems to miss. Fixes: a25717d2b604 ("xdp: support simultaneous driver and hw XDP attachment") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18net: cxgb3_main: fix potential Spectre v1Gustavo A. R. Silva
t.qset_idx can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:2286 cxgb_extension_ioctl() warn: potential spectre issue 'adapter->msix_info' Fix this by sanitizing t.qset_idx before using it to index adapter->msix_info Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18lib/rhashtable: consider param->min_size when setting initial table sizeDavidlohr Bueso
rhashtable_init() currently does not take into account the user-passed min_size parameter unless param->nelem_hint is set as well. As such, the default size (number of buckets) will always be HASH_DEFAULT_SIZE even if the smallest allowed size is larger than that. Remediate this by unconditionally calling into rounded_hashtable_size() and handling things accordingly. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18vfio/pci: Fix potential Spectre v1Gustavo A. R. Silva
info.index can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/vfio/pci/vfio_pci.c:734 vfio_pci_ioctl() warn: potential spectre issue 'vdev->region' Fix this by sanitizing info.index before indirectly using it to index vdev->region Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-07-18Merge tag 'for-4.18-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Three regression fixes. They're few-liners and fixing some corner cases missed in the origial patches" * tag 'for-4.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: scrub: Don't use inode page cache in scrub_handle_errored_block() btrfs: fix use-after-free of cmp workspace pages btrfs: restore uuid_mutex in btrfs_open_devices
2018-07-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Miscellaneous bugfixes, plus a small patchlet related to Spectre v2" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvmclock: fix TSC calibration for nested guests KVM: VMX: Mark VMXArea with revision_id of physical CPU even when eVMCS enabled KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumer KVM/Eventfd: Avoid crash when assign and deassign specific eventfd in parallel. x86/kvmclock: set pvti_cpu0_va after enabling kvmclock x86/kvm/Kconfig: Ensure CRYPTO_DEV_CCP_DD state at minimum matches KVM_AMD kvm: nVMX: Restore exit qual for VM-entry failure due to MSR loading x86/kvm/vmx: don't read current->thread.{fs,gs}base of legacy tasks KVM: VMX: support MSR_IA32_ARCH_CAPABILITIES as a feature MSR
2018-07-18Merge branch 'smc-fixes'David S. Miller
Ursula Braun says: ==================== net/smc: fixes 2018-07-18 here are small fixes for SMC: The first patch speeds up unidirectional traffic, the second patch increases security, and the third patch fixes a problem for fallback cases. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18net/smc: reset recv timeout after clc handshakeKarsten Graul
During clc handshake the receive timeout is set to CLC_WAIT_TIME. Remember and reset the original timeout value after the receive calls, and remove a duplicate assignment of CLC_WAIT_TIME. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18net/smc: add error handling for get_user()Ursula Braun
For security reasons the return code of get_user() should always be checked. Fixes: 01d2f7e2cdd31 ("net/smc: sockopts TCP_NODELAY and TCP_CORK") Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18net/smc: optimize consumer cursor updatesUrsula Braun
The SMC protocol requires to send a separate consumer cursor update, if it cannot be piggybacked to updates of the producer cursor. Currently the decision to send a separate consumer cursor update just considers the amount of data already received by the socket program. It does not consider the amount of data already arrived, but not yet consumed by the receiver. Basing the decision on the difference between already confirmed and already arrived data (instead of difference between already confirmed and already consumed data), may lead to a somewhat earlier consumer cursor update send in fast unidirectional traffic scenarios, and thus to better throughput. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Suggested-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18net: mvpp2: debugfs: fix incorrect bitwise operatorGustavo A. R. Silva
The use of the | operator always leads to true, which looks rather suspect in this case. Fix this by using & instead. Addresses-Coverity-ID: 1471903 ("Wrong operator used") Fixes: dba1d918da02 ("net: mvpp2: debugfs: add entries for classifier flows") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18cxgb4: display number of rx and tx pages freeGanesh Goudar
display free rx and tx page count in the meminfo of an adapter. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL.Tetsuo Handa
syzbot is reporting stalls at nfc_llcp_send_ui_frame() [1]. This is because nfc_llcp_send_ui_frame() is retrying the loop without any delay when nonblocking nfc_alloc_send_skb() returned NULL. Since there is no need to use MSG_DONTWAIT if we retry until sock_alloc_send_pskb() succeeds, let's use blocking call. Also, in case an unexpected error occurred, let's break the loop if blocking nfc_alloc_send_skb() failed. [1] https://syzkaller.appspot.com/bug?id=4a131cc571c3733e0eff6bc673f4e36ae48f19c6 Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+d29d18215e477cfbfbdd@syzkaller.appspotmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18ipv6: ila: select CONFIG_DST_CACHEArnd Bergmann
My randconfig builds came across an old missing dependency for ILA: ERROR: "dst_cache_set_ip6" [net/ipv6/ila/ila.ko] undefined! ERROR: "dst_cache_get" [net/ipv6/ila/ila.ko] undefined! ERROR: "dst_cache_init" [net/ipv6/ila/ila.ko] undefined! ERROR: "dst_cache_destroy" [net/ipv6/ila/ila.ko] undefined! We almost never run into this by accident because randconfig builds end up selecting DST_CACHE from some other tunnel protocol, and this one appears to be the only one missing the explicit 'select'. >From all I can tell, this problem first appeared in linux-4.9 when dst_cache support got added to ILA. Fixes: 79ff2fc31e0f ("ila: Cache a route to translated address") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19Merge branch 'mlxsw-Introduce-initial-Spectrum-2-support'David S. Miller
Ido Schimmel says: ==================== mlxsw: Introduce initial Spectrum-2 support This patch set adds initial support for the Spectrum-2 ASIC. The first two patches add Spectrum-2 specific KVD linear (KVDL) manager. Unlike the Spectrum ASIC, there is no linear memory and instead the type of the entry (e.g., nexthop) and its index are hashed and the entry is placed in the computed address in the hash-based KVD memory. The third patch adds Spectrum-2 stubs in the multicast routing code. Support for multicast routing will be added later on. Patches 4-15 add ACL support. The Spectrum-2 ASIC includes an algorithmic TCAM (A-TCAM) and a regular circuit TCAM (C-TCAM) for rules that can't be inserted into the A-TCAM. This set does not make use of the A-TCAM and only places rules in the C-TCAM. This provides equivalent scale and performance to the Spectrum ASIC. A follow-up patch set will introduce A-TCAM support. The last patch extends the main driver file to work with both ASICs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: spectrum: Extend to support Spectrum-2 ASICJiri Pirko
Extend existing driver for Spectrum ASIC to support Spectrum-2 ASIC. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: spectrum_acl: Add initial Spectrum-2 ACL implementationJiri Pirko
Utilize only C-TCAM for now. Do very minimal A-TCAM initialization in order to make C-TCAM work. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: spectrum_acl: Add region association callbackIdo Schimmel
In Spectrum-2, ACL regions that use 8 or 12 key blocks require several consecutive hardware regions. In order to allow defragmentation, the device stores a mapping from a logical region ID to an hardware region ID, which is similar to the page table that is used to translate virtual addresses to physical addresses. Add the region association callback to the region create sequence and implement it as a NOP in Spectrum which does not require it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: spectrum_acl: Add support for Spectrum-2 block encodingIdo Schimmel
Encode each flexible key block in the general block scheme according its block index. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: spectrum_acl: Prepare for Spectrum-2 block encodingIdo Schimmel
In Spectrum the key (and mask) block layout is very straight forward and every block is 16 bytes aligned. However, in Spectrum-2 the blocks are not even byte aligned, which makes it difficult to encode them using current method. Instead, first encode each block and then encode the block in the general blocks layout. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: reg: Add Policy-Engine General Configuration RegisterIdo Schimmel
The PGCR register configures general Policy-Engine settings. Specifically, we are going to use it in order to set the default action base pointer, which determines where the default action (when there is no hit) is located for each region. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: reg: Add Policy-Engine Region eRP RegisterIdo Schimmel
The PERERP register configures the region eRPs. It can be used, for example, to enable lookup in the C-TCAM in addition to the A-TCAM. To be able to perform a lookup in the C-TCAM we need to "use" the eRP table. This is done by marking the pointer as valid, but zeroing the eRP table vector. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: reg: Add Policy-Engine Region Configuration RegisterIdo Schimmel
The PERCR register configures the region parameters such as whether to consult the bloom filter before performing a lookup using a specific eRP. For C-TCAM only usage we don't need to accurately set the master mask. Instead, we can set all of its bits to make sure all the extracted keys are actually used. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: reg: Add Policy-Engine Region Association RegisterJiri Pirko
The PERAR register is used to associate a hw region for region_id's. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: acl: Introduce activity get operation for action block/setJiri Pirko
In Spectrum-2, activity cannot be find out by TCAM rule (PTCEv2 register), but rather by associated action set. For that purpose, extend action ops to allow query activity from PEFA register. Block activity is decided according to activity of the first set. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: reg: Add support for activity information from PEFA registerJiri Pirko
In Spectrum-2, the PEFA register is extend to report if the action set was hit during processing of packets. Introduce this extension and adjust the code around this accordingly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: spectrum: Introduce flex key blocks for Spectrum-2Jiri Pirko
Introduce key blocks for Spectrum-2 that contains the same elements used already for Spectrum1. Along with that, introduce encoder stub. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: spectrum: Add Spectrum-2 variant of flex actions opsJiri Pirko
In Spectrum-2, no action set is stored directly in TCAM, all are located in KVD linear. So ask core to treat the first set as dummy empty one, to be just used for PTCEV2 purposes. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: spectrum_mr_tcam: Add Spectrum-2 stubsJiri Pirko
Add dummy ops for now. The ops are going to be implemented later on. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: spectrum: Add KVDL manager implementation for Spectrum-2Jiri Pirko
In Spectrum-2, KVD linear indexes are hashed into KVD hash. Therefore it is possible for multiple resource types to use same indexes. There are multiple index spaces. Also, the index space is bigger than the actual KVD hash area, which allows to have holes in the index space without any penalization. The HW has to be told in case the index for particular resource type is no longer used so it can be freed from KVD hash. IEDR register is used for that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19mlxsw: reg: Add Infrastructure Entry Delete RegisterJiri Pirko
The IEDR register is used for deleting entries from the entry tables. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18drm/amd/amdgpu: creating two I2S instances for stoney/cz (v2)Vijendar Mukunda
Creating two I2S instances for Stoney/cz platforms. v2: squash in: "drm/amdgpu/acp: Fix slab-out-of-bounds in mfd_add_device in acp_hw_init" From Daniel Kurtz <djkurtz@chromium.org>. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-18drm/amdgpu: add another ATPX quirk for TOPAZAlex Deucher
Needs ATPX rather than _PR3. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=200517 Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-07-18Merge branch 'bpf-offload-sharing'Daniel Borkmann
Jakub Kicinski says: ==================== This patchset adds support for sharing BPF objects within one ASIC. This will allow us to reuse of the same program on multiple ports of a device leading to better code store utilization. It also enables sharing maps between programs attached to different ports of a device. v2: - rename bpf_offload_match() to bpf_offload_prog_map_match(); - add split patches 7 into 5, 7 and 8. ==================== Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18selftests/bpf: add test for sharing objects between netdevsJakub Kicinski
Add tests for sharing programs and maps between different netdevs. Use netdevsim's ability to pretend multiple netdevs belong to the same "ASIC". Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18nfp: bpf: allow program sharing within ASICJakub Kicinski
Allow program sharing between netdevs of the same NFP ASIC. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18netdevsim: allow program sharing between devicesJakub Kicinski
Allow program sharing between devices which were linked together. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18bpf: offload: allow program and map sharing per-ASICJakub Kicinski
Allow programs and maps to be re-used across different netdevs, as long as they belong to the same struct bpf_offload_dev. Update the bpf_offload_prog_map_match() helper for the verifier and export a new helper for the drivers to use when checking programs at attachment time. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18bpf: offload: keep the offload state per-ASICJakub Kicinski
Create a higher-level entity to represent a device/ASIC to allow programs and maps to be shared between device ports. The extra work is required to make sure we don't destroy BPF objects as soon as the netdev for which they were loaded gets destroyed, as other ports may still be using them. When netdev goes away all of its BPF objects will be moved to other netdevs of the device, and only destroyed when last netdev is unregistered. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18bpf: offload: aggregate offloads per-deviceJakub Kicinski
Currently we have two lists of offloaded objects - programs and maps. Netdevice unregister notifier scans those lists to orphan objects associated with device being unregistered. This puts unnecessary (even if negligible) burden on all netdev unregister calls in BPF- -enabled kernel. The lists of objects may potentially get long making the linear scan even more problematic. There haven't been complaints about this mechanisms so far, but it is suboptimal. Instead of relying on notifiers, make the few BPF-capable drivers register explicitly for BPF offloads. The programs and maps will now be collected per-device not on a global list, and only scanned for removal when driver unregisters from BPF offloads. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18bpf: offload: rename bpf_offload_dev_match() to bpf_offload_prog_map_match()Jakub Kicinski
A set of new API functions exported for the drivers will soon use 'bpf_offload_dev_' as a prefix. Rename the bpf_offload_dev_match() which is internal to the core (used by the verifier) to avoid any confusion. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18nfp: add .ndo_init() and .ndo_uninit() callbacksJakub Kicinski
BPF code should unregister the offload capabilities from .ndo_uninit(), to make sure the operation is atomic with unlist_netdevice(). Plumb the init/uninit NDOs for vNICs and representors. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18netdevsim: associate bound programs with shared devJakub Kicinski
Move bound program information from netdevsim to shared sub-object, as programs will soon be shared between netdevs of the same ASIC. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18netdevsim: add shared netdevsim devicesJakub Kicinski
Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18netdevsim: add switch_id attributeJakub Kicinski
Grouping netdevsim devices into "ASICs" will soon be supported. Add switch_id attribute to all netdevsims. For now each netdevsim will have its switch_id matching the device id. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18bpf: sockmap: remove redundant pointer sgColin Ian King
Pointer sg is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'sg' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-18bpf: fix rcu annotations in compute_effective_progs()Roman Gushchin
The progs local variable in compute_effective_progs() is marked as __rcu, which is not correct. This is a local pointer, which is initialized by bpf_prog_array_alloc(), which also now returns a generic non-rcu pointer. The real rcu-protected pointer is *array (array is a pointer to an RCU-protected pointer), so the assignment should be performed using rcu_assign_pointer(). Fixes: 324bda9e6c5a ("bpf: multi program support for cgroup+bpf") Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
generated by cgit (git 2.34.1) at 2025-09-16 10:36:05 +0000