summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-18r8169: don't read chip phy status registerHeiner Kallweit
Instead of accessing the PHYstatus register we can use the information phylib stores in the phy_device structure. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18r8169: remove mii_if_info member from struct rtl8169_privateHeiner Kallweit
The only remaining usage of the struct mii_if_info member is to store the information whether the chip is GMII-capable. So we can replace it with a simple flag. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18r8169: remove rtl8169_set_speed_xmiiHeiner Kallweit
We can remove rtl8169_set_speed_xmii() now that phylib handles all this. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18r8169: use phy_speed_down / phy_speed_upHeiner Kallweit
Use new phylib functions phy_speed_down() and phy_speed_up(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18r8169: use phy_mii_ioctlHeiner Kallweit
Switch to using phy_mii_ioctl(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18r8169: use phy_ethtool_nway_resetHeiner Kallweit
Switch to using phy_ethtool_nway_reset(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18r8169: use phy_ethtool_(g|s)et_link_ksettingsHeiner Kallweit
Use phy_ethtool_(g|s)et_link_ksettings() for the respective ethtool_ops callbacks. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18r8169: replace open-coded PHY soft reset with genphy_soft_resetHeiner Kallweit
Use genphy_soft_reset() instead of open-coding a PHY soft reset. We have to do an explicit PHY soft reset because some chips use the genphy driver which uses a no-op as soft_reset callback. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18r8169: use phy_resume/phy_suspendHeiner Kallweit
Use phy_resume() / phy_suspend() instead of open coding this functionality. The chip version specific differences are handled by the respective PHY drivers. The call to r8168_phy_power_down() in r8168_pll_power_down() can be removed because phylib takes care now. The relevant scenarios are: - rtl8169_close(): phy_disconnect() powers down PHY - suspend: mdio_bus_phy_suspend() takes care - runtime-suspend: WoL is active, don't suspend PHY - rtl_shutdown(): no need to power down PHY Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18r8169: add basic phylib supportHeiner Kallweit
Add basic phylib support to r8169. All now unneeded old PHY handling code will be removed in subsequent patches. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-17drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on CarrizoHersen Wu
[why] dp hbr2 eye diagram pattern for raven asic is not stabled. workaround is to use tp4 pattern. But this should not be applied to asic before raven. [how] add new bool varilable in asic caps. for raven asic, use the workaround. for carrizo, vega, do not use workaround. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-17drm/amdgpu: Make sure IB tests flushed after IP resumeLeo Liu
Fixes: 2c773de2 (drm/amdgpu: defer test IBs on the rings at boot (V3)) Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-17Mark HI and TASKLET softirq synchronousLinus Torvalds
Way back in 4.9, we committed 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), and ever since we've had small nagging issues with it. For example, we've had: 1ff688209e2e ("watchdog: core: make sure the watchdog_worker is not deferred") 8d5755b3f77b ("watchdog: softdog: fire watchdog even if softirqs do not get to run") 217f69743681 ("net: busy-poll: allow preemption in sk_busy_loop()") all of which worked around some of the effects of that commit. The DVB people have also complained that the commit causes excessive USB URB latencies, which seems to be due to the USB code using tasklets to schedule USB traffic. This seems to be an issue mainly when already living on the edge, but waiting for ksoftirqd to handle it really does seem to cause excessive latencies. Now Hanna Hawa reports that this issue isn't just limited to USB URB and DVB, but also causes timeout problems for the Marvell SoC team: "I'm facing kernel panic issue while running raid 5 on sata disks connected to Macchiatobin (Marvell community board with Armada-8040 SoC with 4 ARMv8 cores of CA72) Raid 5 built with Marvell DMA engine and async_tx mechanism (ASYNC_TX_DMA [=y]); the DMA driver (mv_xor_v2) uses a tasklet to clean the done descriptors from the queue" The latency problem causes a panic: mv_xor_v2 f0400000.xor: dma_sync_wait: timeout! Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for transaction We've discussed simply just reverting the original commit entirely, and also much more involved solutions (with per-softirq threads etc). This patch is intentionally stupid and fairly limited, because the issue still remains, and the other solutions either got sidetracked or had other issues. We should probably also consider the timer softirqs to be synchronous and not be delayed to ksoftirqd (since they were the issue with the earlier watchdog problems), but that should be done as a separate patch. This does only the tasklet cases. Reported-and-tested-by: Hanna Hawa <hannah@marvell.com> Reported-and-tested-by: Josef Griebichler <griebichler.josef@gmx.at> Reported-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-17ALSA: rawmidi: Change resized buffers atomicallyTakashi Iwai
The SNDRV_RAWMIDI_IOCTL_PARAMS ioctl may resize the buffers and the current code is racy. For example, the sequencer client may write to buffer while it being resized. As a simple workaround, let's switch to the resized buffer inside the stream runtime lock. Reported-by: syzbot+52f83f0ea8df16932f7f@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-17netfilter: Kconfig: Change select IPv6 dependenciesMáté Eckl
... from IPV6 to NF_TABLES_IPV6 and IP6_NF_IPTABLES. In some cases module selects depend on IPV6, but this means that they select another module even if eg. NF_TABLES_IPV6 is not set in which case the selected module is useless due to the lack of IPv6 nf_tables functionality. The same applies for IP6_NF_IPTABLES and iptables. Joint work with: Arnd Bermann <arnd@arndb.de> Signed-off-by: Máté Eckl <ecklm94@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-17netfilter: conntrack: remove l3proto abstractionFlorian Westphal
This unifies ipv4 and ipv6 protocol trackers and removes the l3proto abstraction. This gets rid of all l3proto indirect calls and the need to do a lookup on the function to call for l3 demux. It increases module size by only a small amount (12kbyte), so this reduces size because nf_conntrack.ko is useless without either nf_conntrack_ipv4 or nf_conntrack_ipv6 module. before: text data bss dec hex filename 7357 1088 0 8445 20fd nf_conntrack_ipv4.ko 7405 1084 4 8493 212d nf_conntrack_ipv6.ko 72614 13689 236 86539 1520b nf_conntrack.ko 19K nf_conntrack_ipv4.ko 19K nf_conntrack_ipv6.ko 179K nf_conntrack.ko after: text data bss dec hex filename 79277 13937 236 93450 16d0a nf_conntrack.ko 191K nf_conntrack.ko Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-17btrfs: scrub: Don't use inode page cache in scrub_handle_errored_block()Qu Wenruo
In commit ac0b4145d662 ("btrfs: scrub: Don't use inode pages for device replace") we removed the branch of copy_nocow_pages() to avoid corruption for compressed nodatasum extents. However above commit only solves the problem in scrub_extent(), if during scrub_pages() we failed to read some pages, sctx->no_io_error_seen will be non-zero and we go to fixup function scrub_handle_errored_block(). In scrub_handle_errored_block(), for sctx without csum (no matter if we're doing replace or scrub) we go to scrub_fixup_nodatasum() routine, which does the similar thing with copy_nocow_pages(), but does it without the extra check in copy_nocow_pages() routine. So for test cases like btrfs/100, where we emulate read errors during replace/scrub, we could corrupt compressed extent data again. This patch will fix it just by avoiding any "optimization" for nodatasum, just falls back to the normal fixup routine by try read from any good copy. This also solves WARN_ON() or dead lock caused by lame backref iteration in scrub_fixup_nodatasum() routine. The deadlock or WARN_ON() won't be triggered before commit ac0b4145d662 ("btrfs: scrub: Don't use inode pages for device replace") since copy_nocow_pages() have better locking and extra check for data extent, and it's already doing the fixup work by try to read data from any good copy, so it won't go scrub_fixup_nodatasum() anyway. This patch disables the faulty code and will be removed completely in a followup patch. Fixes: ac0b4145d662 ("btrfs: scrub: Don't use inode pages for device replace") Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-07-16liquidio: correct error msg text when removing VLAN IDRick Farrington
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: Fix GRO_HASH_BUCKETS assertion.David S. Miller
FIELD_SIZEOF() is in bytes, but we want bits. Fixes: d9f37d01e294 ("net: convert gro_count to bitmask") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tools: bpftool: don't pass FEATURES_DUMP to libbpfJakub Kicinski
bpftool does not export features it probed for, i.e. FEATURE_DUMP_EXPORT is always empty, so don't try to communicate the features to libbpf. It has no effect. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-16tools: libbpf: remove libelf-getphdrnum feature detectionJakub Kicinski
libbpf does not depend on libelf-getphdrnum feature, don't check it. $ git grep HAVE_ELF_GETPHDRNUM_SUPPORT tools/perf/Makefile.config: CFLAGS += -DHAVE_ELF_GETPHDRNUM_SUPPORT tools/perf/util/symbol-elf.c:#ifndef HAVE_ELF_GETPHDRNUM_SUPPORT Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-16samples/bpf: test_cgrp2_sock2: fix an off by oneDan Carpenter
"prog_cnt" is the number of elements which are filled out in prog_fd[] so the test should be >= instead of >. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-16samples: bpf: ensure that we don't load over MAX_PROGS programsDan Carpenter
I can't see that we check prog_cnt to ensure it doesn't go over MAX_PROGS. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-16sch_cake: Fix tin order when set through skb->priorityToke Høiland-Jørgensen
In diffserv mode, CAKE stores tins in a different order internally than the logical order exposed to userspace. The order remapping was missing in the handling of 'tc filter' priority mappings through skb->priority, resulting in bulk and best effort mappings being reversed relative to how they are displayed. Fix this by adding the missing mapping when reading skb->priority. Fixes: 83f8fd69af4f ("sch_cake: Add DiffServ handling") Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16cxgb4: collect ASIC LA dumps from ULP TXSurendra Mobiya
Signed-off-by: Surendra Mobiya <surendra@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/smc: take sock lock in smc_ioctl()Ursula Braun
SMC ioctl processing requires the sock lock to work properly in all thinkable scenarios. Problem has been found with RaceFuzzer and fixes: KASAN: null-ptr-deref Read in smc_ioctl Reported-by: Byoungyoung Lee <lifeasageek@gmail.com> Reported-by: syzbot+35b2c5aa76fd398b9fd4@syzkaller.appspotmail.com Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16Merge branch 'tg3-fixes'David S. Miller
Siva Reddy Kallam says: ==================== tg3: Update copyright and fix for tx timeout with 5762 First patch: Update copyright Second patch: Add higher cpu clock for 5762 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tg3: Add higher cpu clock for 5762.Sanjeev Bansal
This patch has fix for TX timeout while running bi-directional traffic with 100 Mbps using 5762. Signed-off-by: Sanjeev Bansal <sanjeevb.bansal@broadcom.com> Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tg3: Update copyrightSiva Reddy Kallam
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16ibmvnic: Fix error recovery on login failureJohn Allen
Testing has uncovered a failure case that is not handled properly. In the event that a login fails and we are not able to recover on the spot, we return 0 from do_reset, preventing any error recovery code from being triggered. Additionally, the state is set to "probed" meaning that when we are able to trigger the error recovery, the driver always comes up in the probed state. To handle the case properly, we need to return a failure code here and set the adapter state to the state that we entered the reset in indicating the state that we would like to come out of the recovery reset in. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: lan78xx: Fix race in tx pending skb size calculationStefan Wahren
The skb size calculation in lan78xx_tx_bh is in race with the start_xmit, which could lead to rare kernel oopses. So protect the whole skb walk with a spin lock. As a benefit we can unlink the skb directly. This patch was tested on Raspberry Pi 3B+ Link: https://github.com/raspberrypi/linux/issues/2608 Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Cc: stable <stable@vger.kernel.org> Signed-off-by: Floris Bos <bos@je-eigen-domein.nl> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/ipv6: Do not allow device only routes via the multipath APIDavid Ahern
Eric reported that reverting the patch that fixed and simplified IPv6 multipath routes means reverting back to invalid userspace notifications. eg., $ ip -6 route add 2001:db8:1::/64 nexthop dev eth0 nexthop dev eth1 only generates a single notification: 2001:db8:1::/64 dev eth0 metric 1024 pref medium While working on a fix for this problem I found another case that is just broken completely - a multipath route with a gateway followed by device followed by gateway: $ ip -6 ro add 2001:db8:103::/64 nexthop via 2001:db8:1::64 nexthop dev dummy2 nexthop via 2001:db8:3::64 In this case the device only route is dropped completely - no notification to userpsace but no addition to the FIB either: $ ip -6 ro ls 2001:db8:1::/64 dev dummy1 proto kernel metric 256 pref medium 2001:db8:2::/64 dev dummy2 proto kernel metric 256 pref medium 2001:db8:3::/64 dev dummy3 proto kernel metric 256 pref medium 2001:db8:103::/64 metric 1024 nexthop via 2001:db8:1::64 dev dummy1 weight 1 nexthop via 2001:db8:3::64 dev dummy3 weight 1 pref medium fe80::/64 dev dummy1 proto kernel metric 256 pref medium fe80::/64 dev dummy2 proto kernel metric 256 pref medium fe80::/64 dev dummy3 proto kernel metric 256 pref medium Really, IPv6 multipath is just FUBAR'ed beyond repair when it comes to device only routes, so do not allow it all. This change will break any scripts relying on the mpath api for insert, but I don't see any other way to handle the permutations. Besides, since the routes are added to the FIB as standalone (non-multipath) routes the kernel is not doing what the user requested, so it might as well tell the user that. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tcp: Fix broken repair socket window probe patchStefan Baranoff
Correct previous bad attempt at allowing sockets to come out of TCP repair without sending window probes. To avoid changing size of the repair variable in struct tcp_sock, this lets the decision for sending probes or not to be made when coming out of repair by introducing two ways to turn it off. v2: * Remove erroneous comment; defines now make behavior clear Fixes: 70b7ff130224 ("tcp: allow user to create repair socket without window probes") Signed-off-by: Stefan Baranoff <sbaranoff@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/mlx4_en: Don't reuse RX page when XDP is setSaeed Mahameed
When a new rx packet arrives, the rx path will decide whether to reuse the remainder of the page or not according to one of the below conditions: 1. frag_info->frag_stride == PAGE_SIZE / 2 2. frags->page_offset + frag_info->frag_size > PAGE_SIZE; The first condition is no met for when XDP is set. For XDP, page_offset is always set to priv->rx_headroom which is XDP_PACKET_HEADROOM and frag_info->frag_size is around mtu size + some padding, still the 2nd release condition will hold since XDP_PACKET_HEADROOM + 1536 < PAGE_SIZE, as a result the page will not be released and will be _wrongly_ reused for next free rx descriptor. In XDP there is an assumption to have a page per packet and reuse can break such assumption and might cause packet data corruptions. Fix this by adding an extra condition (!priv->rx_headroom) to the 2nd case to avoid page reuse when XDP is set, since rx_headroom is set to 0 for non XDP setup and set to XDP_PACKET_HEADROOM for XDP setup. No additional cache line is required for the new condition. Fixes: 34db548bfb95 ("mlx4: add page recycling in receive path") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Suggested-by: Martin KaFai Lau <kafai@fb.com> CC: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16mlxsw: spectrum: Expose counters for various packet sizesJiri Pirko
Expose counters ASIC has in the group of RFC 2819 counters that count number of packets within specific size range. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net/ethernet/freescale/fman: fix cross-build errorRandy Dunlap
CC [M] drivers/net/ethernet/freescale/fman/fman.o In file included from ../drivers/net/ethernet/freescale/fman/fman.c:35: ../include/linux/fsl/guts.h: In function 'guts_set_dmacr': ../include/linux/fsl/guts.h:165:2: error: implicit declaration of function 'clrsetbits_be32' [-Werror=implicit-function-declaration] clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift); ^~~~~~~~~~~~~~~ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Madalin Bucur <madalin.bucur@nxp.com> Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16liquidio: fix hang when re-binding VF host drv after running DPDK VF driverRick Farrington
When configuring SLI_PKTn_OUTPUT_CONTROL, VF driver was assuming that IPTR mode was disabled by reset, which was not true. Since DPDK driver had set IPTR mode previously, the VF driver (which uses buf-ptr-only mode) was not properly handling DROQ packets (i.e. it saw zero-length packets). This represented an invalid hardware configuration which the driver could not handle. Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16hv/netvsc: fix handling of fallback to single queue modeStephen Hemminger
The netvsc device may need to fallback to running in single queue mode if host side only wants to support single queue. Recent change for handling mtu broke this in setup logic. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 3ffe64f1a641 ("hv_netvsc: split sub-channel setup into async and sync") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16ibmvnic: Revise RX/TX queue error messagesThomas Falcon
During a device failover, there may be latency between the loss of the current backing device and a notification from firmware that a failover has occurred. This latency can result in a large amount of error printouts as firmware returns outgoing traffic with a generic error code. These are not necessarily errors in this case as the firmware is busy swapping in a new backing adapter and is not ready to send packets yet. This patch reclassifies those error codes as warnings with an explanation that a failover may be pending. All other return codes will be considered errors. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16ipv6: make DAD fail with enhanced DAD when nonce length differsSabrina Dubroca
Commit adc176c54722 ("ipv6 addrconf: Implemented enhanced DAD (RFC7527)") added enhanced DAD with a nonce length of 6 bytes. However, RFC7527 doesn't specify the length of the nonce, other than being 6 + 8*k bytes, with integer k >= 0 (RFC3971 5.3.2). The current implementation simply assumes that the nonce will always be 6 bytes, but others systems are free to choose different sizes. If another system sends a nonce of different length but with the same 6 bytes prefix, it shouldn't be considered as the same nonce. Thus, check that the length of the received nonce is the same as the length we sent. Ugly scapy test script running on veth0: def loop(): pkt=sniff(iface="veth0", filter="icmp6", count=1) pkt = pkt[0] b = bytearray(pkt[Raw].load) b[1] += 1 b += b'\xde\xad\xbe\xef\xde\xad\xbe\xef' pkt[Raw].load = bytes(b) pkt[IPv6].plen += 8 # fixup checksum after modifying the payload pkt[IPv6].payload.cksum -= 0x3b44 if pkt[IPv6].payload.cksum < 0: pkt[IPv6].payload.cksum += 0xffff sendp(pkt, iface="veth0") This should result in DAD failure for any address added to veth0's peer, but is currently ignored. Fixes: adc176c54722 ("ipv6 addrconf: Implemented enhanced DAD (RFC7527)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: cavium: Drop dependency of NET_VENDOR_CAVIUM on PCIAlexander Sverdlin
Octeon Ethernet drivers work perfectly without PCI. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: mscc: simplify retrieving the tag type from the frame headerAntoine Tenart
The tag type in the frame extraction header is only a bit wide. There's no need to use GENMASK when retrieving the information. This patch simplify the code by dropping GENMASK and using BIT instead. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16cxgb4: do not return DUPLEX_UNKNOWN when link is downGanesh Goudar
We were returning DUPLEX_UNKNOWN in get_link_ksettings() when the link was down. Unfortunately, this causes a problem when "ethtool -s autoneg on" is issued for a link which is down because the ethtool code first reads the settings and then reapplies them with only the changes provided on the command line. Which results in us diving into set_link_ksettings() with DUPLEX_UNKNOWN which is not DUPLEX_FULL, so set_link_ksettings() throws an -EINVAL error. do not return DUPLEX_UNKNOWN to fix the issue. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: ethernet: stmmac: fix documentation warningCorentin Labbe
This patch remove the following documentation warning drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:103: warning: Excess function parameter 'priv' description in 'stmmac_axi_setup' It was introduced in commit afea03656add7 ("stmmac: rework DMA bus setting and introduce new platform AXI structure") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: stmmac: dwmac-sun8i: fix typo descrive => describeCorentin Labbe
This patch fix a typo in the word Describe Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: convert gro_count to bitmaskLi RongQing
gro_hash size is 192 bytes, and uses 3 cache lines, if there is few flows, gro_hash may be not fully used, so it is unnecessary to iterate all gro_hash in napi_gro_flush(), to occupy unnecessary cacheline. convert gro_count to a bitmask, and rename it as gro_bitmask, each bit represents a element of gro_hash, only flush a gro_hash element if the related bit is set, to speed up napi_gro_flush(). and update gro_bitmask only if it will be changed, to reduce cache update Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Cc: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: ip6_gre: get ipv6hdr after skb_cow_head()Prashant Bhole
A KASAN:use-after-free bug was found related to ip6-erspan while running selftests/net/ip6_gre_headroom.sh It happens because of following sequence: - ipv6hdr pointer is obtained from skb - skb_cow_head() is called, skb->head memory is reallocated - old data is accessed using ipv6hdr pointer skb_cow_head() call was added in e41c7c68ea77 ("ip6erspan: make sure enough headroom at xmit."), but looking at the history there was a chance of similar bug because gre_handle_offloads() and pskb_trim() can also reallocate skb->head memory. Fixes tag points to commit which introduced possibility of this bug. This patch moves ipv6hdr pointer assignment after skb_cow_head() call. Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16tun: Fix use-after-free on XDP_TXToshiaki Makita
On XDP_TX we need to free up the frame only when tun_xdp_tx() returns a negative value. A positive value indicates that the packet is successfully enqueued to the ptr_ring, so freeing the page causes use-after-free. Fixes: 735fc4054b3a ("xdp: change ndo_xdp_xmit API to support bulking") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16bnxt_en: remove redundant debug register dma mem allocationYueHaibing
hwrm_dbg_resp_addr and hwrm_dbg_resp_dma_addr are never used and can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16liquidio: Use %pad printk format for dma_addr_t valuesHelge Deller
Use the existing %pad printk format to print dma_addr_t values. This avoids the following warnings when compiling on the parisc platform: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 2 has type 'dma_addr_t {aka unsigned int}' [-Wformat=] Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-16 15:15:55 +0000