| Age | Commit message (Collapse) | Author |
|---|
|
Previously we had a situation where shmem mTHP controls and stats were not
exposed for some supported sizes and were exposed for some unsupported
sizes. So let's clean that up.
Anon mTHP can support all large orders [2, PMD_ORDER]. But shmem can
support all large orders [1, MAX_PAGECACHE_ORDER]. However, per-size
shmem controls and stats were previously being exposed for all the anon
mTHP orders, meaning order-1 was not present, and for arm64 64K base
pages, orders 12 and 13 were exposed but were not supported internally.
Tidy this all up by defining ctrl and stats attribute groups for anon and
file separately. Anon ctrl and stats groups are populated for all orders
in THP_ORDERS_ALL_ANON and file ctrl and stats groups are populated for
all orders in THP_ORDERS_ALL_FILE_DEFAULT.
Additionally, create "any" ctrl and stats attribute groups which are
populated for all orders in (THP_ORDERS_ALL_ANON |
THP_ORDERS_ALL_FILE_DEFAULT). swpout stats use this since they apply to
anon and shmem.
The side-effect of all this is that different hugepage-*kB directories
contain different sets of controls and stats, depending on which memory
types support that size. This approach is preferred over the alternative,
which is to populate dummy controls and stats for memory types that do not
support a given size.
[ryan.roberts@arm.com: file pages and shmem can also be split]
Link: https://lkml.kernel.org/r/f7ced14c-8bc5-405f-bee7-94f63980f525@arm.comLink: https://lkml.kernel.org/r/20240808111849.651867-3-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Barry Song <baohua@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Shmem mTHP controls and stats improvements", v3.
This is a small series to tidy up the way the shmem controls and stats are
exposed. These patches were previously part of the series at [2], but I
decided to split them out since they can go in independently.
This patch (of 2):
Let's move count_mthp_stat() so that it's always defined, even when THP is
disabled. Previously uses of the function in files such as shmem.c, which
are compiled even when THP is disabled, required ugly THP ifdeferry. With
this cleanup, we can remove those ifdefs and the function resolves to a
nop when THP is disabled.
I shortly plan to call count_mthp_stat() from more THP-invariant source
files.
Link: https://lkml.kernel.org/r/20240808111849.651867-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20240808111849.651867-2-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Barry Song <baohua@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Lance Yang <ioworker0@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
scx_dump_data is only used inside ext.c but doesn't have static. Add it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409070218.RB5WsQ07-lkp@intel.com/
|
|
Block comments should align the * on each line, as checkpatch rightfully
pointed out, so fix that style issue on the newly added rk3576 headers.
Fixes: 49c04453db81 ("dt-bindings: clock, reset: Add support for rk3576")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240909223149.85364-1-heiko@sntech.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Fix some spelling errors in the code comments of libbpf:
betwen -> between
paremeters -> parameters
knowning -> knowing
definiton -> definition
compatiblity -> compatibility
overriden -> overridden
occured -> occurred
proccess -> process
managment -> management
nessary -> necessary
Signed-off-by: Yusheng Zheng <yunwei356@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240909225952.30324-1-yunwei356@gmail.com
|
|
The previous e-mail address from Synopsys is not available anymore.
Signed-off-by: Shahab Vahedi <list+bpf@vahedi.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240909184754.27634-1-list+bpf@vahedi.org
|
|
When "arg#%d expected pointer to ctx, but got %s" error is printed, both
template parts actually point to the type of the argument, therefore, it
will also say "but got PTR", regardless of what was the actual register
type.
Fix the message to print the register type in the second part of the
template, change the existing test to adapt to the new format, and add a
new test to test the case when arg is a pointer to context, but reg is a
scalar.
Fixes: 00b85860feb8 ("bpf: Rewrite kfunc argument handling")
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240909133909.1315460-1-maxim@isovalent.com
|
|
Fix typos in documentation.
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240909092452.4293-1-algonell@gmail.com
|
|
Replace shifts of '1' with '1U' in bitwise operations within
__show_dev_tc_bpf() to prevent undefined behavior caused by shifting
into the sign bit of a signed integer. By using '1U', the operations
are explicitly performed on unsigned integers, avoiding potential
integer overflow or sign-related issues.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240908140009.3149781-1-visitorckw@gmail.com
|
|
ARM64 has a separate lr register to store the return address, so here
you only need to read the lr register to get the return address, no need
to dereference it again.
Signed-off-by: Shuyi Cheng <chengshuyi@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1725787433-77262-1-git-send-email-chengshuyi@linux.alibaba.com
|
|
Group all cxl related kernel headers into include/cxl/ directory.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20240905223711.1990186-2-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
On chipsets with a second 'Integrated Device Function' SMBus controller use
a different adapter-name for the second IDF adapter.
This allows platform glue code which is looking for the primary i801
adapter to manually instantiate i2c_clients on to differentiate
between the 2.
This allows such code to find the primary i801 adapter by name, without
needing to duplicate the PCI-ids to feature-flags mapping from i2c-i801.c.
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Platform glue code, which is not build into the kernel and thus cannot
use i2c_register_board_info() may want to use bus_register_notifier()
to listen for i2c-adapters to show up on which the platform code needs
to manually instantiate platform specific i2c_clients.
This results in calling i2c_new_client_device() from the bus notifier
which happens near the device_add() call.
If the i2c-core has not yet setup runtime-pm (specifically the
no-callbacks and ignore-children flags) for the device embedded
inside struct i2c_adapter and the driver for the i2c_client
calls pm_runtime_set_active() this will trigger the following
error inside __pm_runtime_set_status():
"runtime PM trying to activate child device %s but parent (%s) is not active\n"
and the i2c_client's runtime-status will not be updated.
Split the device_register() call for the adapter into device_initialize()
and device_add() and move the pm-runtime init calls inbetween these 2 calls
so that the runtime-status can be correctly set when a driver binds from
the bus-notifier.
Note the moved pm-runtime init calls just override the initial value of
some flags in struct device set by device_initialize() and calling these
before device_add() is safe.
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Convert the Spreadtrum SC9860 I2C controller bindings to DT schema.
Adjust filename to match compatible.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
On Intel Denverton SoC ismt controller may enter weird state when
transaction gets stuck. It times out in the driver, but unless
transaction is explicitly killed in the controller, it won't be able to
perform new transactions anymore.
The issue is extremely difficult to reproduce and may take weeks of non-
stop smbus traffic.
Numerous hours with logic analyzer didn't yield any useful results, it
looks like the controller stops toggling SCK line, i.e. the issue is
likely in the controller, since device doesn't do clock stretching, so
nothing is driving SCK except the host.
Explicitly kill transaction on timeout to recover the controller from
this state.
Signed-off-by: Vasily Khoruzhick <vasilykh@arista.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
There are quite a few drivers and options for the DesignWare
I2C adapter in the Kconfig. Grouping all of them under the
I2C_DESIGNWARE_CORE. That makes the menuconfig a bit more
easier to understand.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The dependency handling of the Synopsys DesignWare I2C
adapter drivers is going to be changed so that the glue
drivers for the platform and PCI buses depend on
I2C_DESIGNWARE_CORE. Right now this driver prevents that
update because it selects I2C_DESIGNWARE_PLATFORM.
To make the dependency on I2C_DESIGNWARE_PLATFORM consistent
with the other drivers in kernel that depend on it, and
allow the dependency handling of the Synopsys DesignWare I2C
drivers to be updated, change the "select" into "depends on".
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Cc: Mengyuan Lou <mengyuanlou@net-swift.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The dependency handling of the Synopsys DesignWare I2C
adapter drivers is going to be changed so that the glue
drivers for the PCI and platform buses depend on
I2C_DESIGNWARE_CORE.
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The dependency handling of the Synopsys DesignWare I2C
adapter drivers is going to be changed so that the glue
drivers for the PCI and platform buses depend on
I2C_DESIGNWARE_CORE.
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: UNGLinuxDriver@microchip.com
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The dependency handling of the Synopsys DesignWare I2C
adapter drivers is going to be changed so that the glue
drivers for the PCI and platform buses depend on
I2C_DESIGNWARE_CORE.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The dependency handling of the Synopsys DesignWare I2C
adapter drivers is going to be changed so that the glue
drivers for the PCI and platform buses depend on
I2C_DESIGNWARE_CORE.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The dependency handling of the Synopsys DesignWare I2C
adapter drivers is going to be changed so that the glue
drivers for the PCI and platform buses depend on
I2C_DESIGNWARE_CORE.
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
'struct i2c_algorithm' and 'struct virtio_device_id' are not modified in
this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers, which is the case for struct i2c_algorithm.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
6663 568 16 7247 1c4f drivers/i2c/busses/i2c-virtio.o
After:
=====
text data bss dec hex filename
6735 472 16 7223 1c37 drivers/i2c/busses/i2c-virtio.o
--
Compile tested only
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
rcar_i2c_probe() has priv->devtype operation, but handling (A) and (C)
in same place is more understandable ( (A) and (B) are independent).
(A) if (priv->devtype < I2C_RCAR_GEN3) {
...
}
(B) ...
(C) if (priv->devtype >= I2C_RCAR_GEN3) {
...
}
Let's merge it with if-else
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
To ensure code clarity and prevent potential errors, it's advisable
to employ the ';' as a statement separator, except when ',' are
intentionally used for specific purposes.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
While at it, no more special handling needed here, remove the goto
label "err:".
Signed-off-by: Rong Qianfeng <rongqianfeng@vivo.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
While at it, no need to save clk pointer, drop sclk from struct
em_i2c_device.
Signed-off-by: Rong Qianfeng <rongqianfeng@vivo.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Theobroma Systems Mule is an MCU that emulates a set of I2C devices,
among which an amc6821 and devices that are reachable through an I2C-mux.
The devices on the mux can be selected by writing the appropriate device
number to an I2C config register (amc6821 reg 0xff).
This driver is expected to be probed as a platform device with amc6821
as its parent i2c device.
Add support for the mule-i2c-mux platform driver. The amc6821 driver
support for the mux will be added in a later commit.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Farouk Bouabid <farouk.bouabid@cherry.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Theobroma Systems Mule is an MCU that emulates a set of I2C devices,
among which devices that are reachable through an I2C-mux. The devices
on the mux can be selected by writing the appropriate device number to
an I2C config register.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Farouk Bouabid <farouk.bouabid@cherry.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The smatch check warning is "buffer overflow 'npcm_i2caddr' 2 <= 9".
The original design supports 10 target addresses although only 2
addresses are required for current implementation.
Restore the npcm_i2caddr array length to fix the smatch warning.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202408130818.FgDP5uNm-lkp@intel.com/
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
devm_clk_get_optional() and clk_prepare_enable() can be replaced by the
helper function devm_clk_get_optional_enabled(). Let's simplify the code by
using devm_clk_get_optional_enabled() and avoid calling
clk_disable_unprepare().
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Just like RK356x and RK3588, RK3576 is compatible to the existing
rk3399 binding.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
We have the same (*) PM ops in the PCI and platform drivers.
Instead, consolidate that PM ops under exported variable and
deduplicate them.
*)
With the subtle ACPI and P-Unit behaviour differences in PCI case.
But this is not a problem as for ACPI we need to take care of the
P-Unit semaphore anyway and calling PM ops for PCI makes sense as
it might provide specific operation regions in ACPI (however there
are no known devices on market that are using it with PCI enabled I2C).
Note, the clocks are not in use in the PCI case.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Sanket Goswami <Sanket.Goswami@amd.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
'multi-master' property is defined by core i2c-controller schema in
dtschema package, so binding which references it and has
unevaluatedProperties:false, does not need to mention it. It is
completely redundant here.
Suggested-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Simplify checking for unsupported bus speeds and reporting errors by
factoring out the calculation of the maximum bus speed, and by using the
dev_err_probe() helper.
While at it, use "%u" for u32, and improve the error message.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Commit 90312351fd1e ("i2c: designware: MASTER mode as separated driver")
introduced ->disable() callback but there is no real use for it. Both
i2c-designware-master.c and i2c-designware-slave.c set it to the same
i2c_dw_disable() and scope is inside the same kernel module.
That said, replace the callback by explicitly calling the i2c_dw_disable().
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Reduce scope of the I²C DesignWare driver exports to I2C_DW namespaces.
This will prevent abuse of the symbols and clean up global namespace.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Instead of asymmetrical checks for the firmware type use
the is_*_node() calls.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
We have the same code flows in the PCI and platform drivers. Moreover,
the flow requires the common code to export a few functions. Instead,
consolidate that flow under new function called
i2c_dw_fw_parse_and_configure() and drop unneeded exports.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
For the sake of consistency, rename dw_i2c_of_configure() and change
its parameter to be aligned with the i2c_dw_acpi_configure().
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Top level defines clocks as variable from 3 to 6 items, so each clause
in if:then: should narrow it further with explicit min and maxItems.
Without minItems, the constrain from top-level is being applied, thus
qcom,msm8996-cci allows between 3 and 4 clocks.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Properties are expected to be defined in top-level "properties:" block
and further customized in "if:then:". Only one variant has power
domains, so add respective top-level property and disallow it for other
devices.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Both xxx and xxx-names properties with variable number of items should
be constrained in each "if:then:". Add missing constraints for clocks,
since we have such for clock-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
"if:then:" block for Tegra114 and Tegra120 I2C controllers has the same
"then" part (same clocks), so combine them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Fast mode plus is available on most of the IP variants that RIIC driver
is working with. The exception is (according to HW manuals of the SoCs
where this IP is available) the Renesas RZ/A1H. For this, patch
introduces the struct riic_of_data::fast_mode_plus.
Fast mode plus was tested on RZ/G3S, RZ/G2{L,UL,LC}, RZ/Five by
instantiating the RIIC frequency to 1MHz and issuing i2c reads on the
fast mode plus capable devices (and the i2c clock frequency was checked on
RZ/G3S).
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Document the Renesas RZ/G3S (R9A08G045) RIIC IP. This is compatible with
the version available on Renesas RZ/V2H (R9A09G075).
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Define individual arrays to describe the register offsets. In this way
we can describe different IP variants that share the same register offsets
but have differences in other characteristics. Commit prepares for the
addition of fast mode plus.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add suspend/resume support for the RIIC driver. This is necessary for the
Renesas RZ/G3S SoC which support suspend to deep sleep state where power
to most of the SoC components is turned off. As a result the I2C controller
needs to be reconfigured after suspend/resume. For this, the reset line
was stored in the driver private data structure as well as i2c timings.
The reset line and I2C timings are necessary to re-initialize the
controller after resume.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Enable runtime PM autosuspend support for the RIIC driver. With this, in
case there are consecutive xfer requests the device wouldn't be runtime
enabled/disabled after each consecutive xfer but after the
the delay configured by user. With this, we can avoid touching hardware
registers involved in runtime PM suspend/resume saving in this way some
cycles. The default chosen autosuspend delay is zero to keep the
previous driver behavior.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
pm_runtime_get_sync() may return with error. In case it returns with error
dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get()
takes care of this. Thus use it.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
