summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-09-18drm/i915/bxt: set min brightness from VBTLee, Shawn C
Min brightness value from vbt was missing for BXT platform. This setting have to refer backlight ic spec to restrict min backlight output. Without this restriction, driver would allow to configure lower brightness value and violate backlight ic requirement. Fixes: 0fb890c01349 ("drm/i915/bxt: BLC implementation") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Gary C Wang <gary.c.wang@intel.com> Signed-off-by: Shawn Lee <shawn.c.lee@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1505187390-7039-1-git-send-email-shawn.c.lee@intel.com (cherry picked from commit c3881128cb672cf484a52fbb36b5daa9044d9168) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-09-18drm/i915: Fix an error handling in 'intel_framebuffer_init()'Christophe JAILLET
We should go through the error handling path to decrease the 'framebuffer_references' as done everywhere else in this function. Fixes: 2e2adb05736c ("drm/i915: Add render decompression support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170910085642.13673-1-christophe.jaillet@wanadoo.fr (cherry picked from commit 37875d6b3af702425ce292de81b77faf94766616) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-09-18drm/i915/gvt: Fix incorrect PCI BARs reportingChangbin Du
Looking at our virtual PCI device, we can see surprising Region 4 and Region 5. 00:10.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 06) (prog-if 00 [VGA controller]) .... Region 0: Memory at 140000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at 180000000 (64-bit, prefetchable) [size=1G] Region 4: Memory at <ignored> (32-bit, non-prefetchable) Region 5: Memory at <ignored> (32-bit, non-prefetchable) Expansion ROM at febd6000 [disabled] [size=2K] The fact is that we only implemented BAR0 and BAR2. Surprising Region 4 and Region 5 are shown because we report their size as 0xffffffff. They should report size 0 instead. BTW, the physical GPU has a PIO BAR. GVTg hasn't implemented PIO access, so we ignored this BAR for vGPU device. v2: fix BAR size value calculation. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458032 Signed-off-by: Changbin Du <changbin.du@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> (cherry picked from commit f1751362d6357a90bc6e53176cec715ff2dbed74) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-09-18ip6_gre: skb_push ipv6hdr before packing the header in ip6gre_headerXin Long
Now in ip6gre_header before packing the ipv6 header, it skb_push t->hlen which only includes encap_hlen + tun_hlen. It means greh and inner header would be over written by ipv6 stuff and ipv6h might have no chance to set up. Jianlin found this issue when using remote any on ip6_gre, the packets he captured on gre dev are truncated: 22:50:26.210866 Out ethertype IPv6 (0x86dd), length 120: truncated-ip6 -\ 8128 bytes missing!(flowlabel 0x92f40, hlim 0, next-header Options (0) \ payload length: 8192) ::1:2000:0 > ::1:0:86dd: HBH [trunc] ip-proto-128 \ 8184 It should also skb_push ipv6hdr so that ipv6h points to the right position to set ipv6 stuff up. This patch is to skb_push hlen + sizeof(*ipv6h) and also fix some indents in ip6gre_header. Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18nl80211: fix null-ptr dereference on invalid mesh configurationJohannes Berg
If TX rates are specified during mesh join, the channel must also be specified. Check the channel pointer to avoid a null pointer dereference if it isn't. Reported-by: Jouni Malinen <j@w1.fi> Fixes: 8564e38206de ("cfg80211: add checks for beacon rate, extend to mesh") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-18udpv6: Fix the checksum computation when HW checksum does not applySubash Abhinov Kasiviswanathan
While trying an ESP transport mode encryption for UDPv6 packets of datagram size 1436 with MTU 1500, checksum error was observed in the secondary fragment. This error occurs due to the UDP payload checksum being missed out when computing the full checksum for these packets in udp6_hwcsum_outgoing(). Fixes: d39d938c8228 ("ipv6: Introduce udpv6_send_skb()") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18selftests/ftrace: multiple_kprobes: Also check for supportThomas Meyer
The multiple_kprobes test case fails to check for KPROBE_EVENT support. Add the check to prevent a false test result. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-09-18selftests/bpf: Make bpf_util work on uniprocessor systemsThomas Meyer
The current implementation fails to work on uniprocessor systems. Fix the parser to also handle the uniprocessor case. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-09-18selftests/intel_pstate: No need to compile test progs in the run scriptThomas Meyer
Both test programs are being compiled by make, so no need to compile both programs in the runner script. This resolves an error when installing all selftests via make install and run them in a different environemnt. Running tests in intel_pstate ======================================== ./run.sh: line 35: gcc: command not found Problem compiling aperf.c. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-09-18selftests: intel_pstate: build only on x86Daniel Díaz
These tests are only for x86, so don't try to build or run them on other architectures. Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-09-18selftests: breakpoints: re-order TEST_GEN_PROGS targetsFathi Boudra
breakpoint_test can fail on arm64 with older/unpatched glibc: breakpoint_test_arm64.c: In function 'run_test': breakpoint_test_arm64.c:170:25: error: 'TRAP_HWBKPT' undeclared (first use in this function) due to glibc missing several of the TRAP_* constants in the userspace definitions. Specifically TRAP_BRANCH and TRAP_HWBKPT. See https://sourceware.org/bugzilla/show_bug.cgi?id=21286 It prevents to build step_after_suspend_test afterward, since make won't continue. We still want to be able to build and run the test, independently of breakpoint_test_arm64 build failure. Re-order TEST_GEN_PROGS to be able to build step_after_suspend_test first. Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-09-18tools: fix testing/selftests/sigaltstack for s390xThomas Richter
On s390x the compilation of the file sas.c in directory tools/testing/selftests/sigaltstack fails with this error message: root@s35lp76 testing]# make selftests/sigaltstack/sas cc selftests/sigaltstack/sas.c -o selftests/sigaltstack/sas selftests/sigaltstack/sas.c: In function ‘my_usr1’: selftests/sigaltstack/sas.c:42:25: error: invalid register name for ‘sp’ register unsigned long sp asm("sp"); ^~ <builtin>: recipe for target 'selftests/sigaltstack/sas' failed make: *** [selftests/sigaltstack/sas] Error 1 [root@s35lp76 testing]# On s390x the stack pointer is register r15, the register name "sp" is unknown. Make this line platform dependend and use register r15. With this patch the compilation and test succeeds: [root@s35lp76 testing]# ./selftests/sigaltstack/sas TAP version 13 ok 1 Initial sigaltstack state was SS_DISABLE # [RUN] signal USR1 ok 2 sigaltstack is disabled in sighandler # [RUN] switched to user ctx # [RUN] signal USR2 # [OK] Stack preserved ok 3 sigaltstack is still SS_AUTODISARM after signal Pass 3 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 1..3 [root@s35lp76 testing]# Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-09-18selftests: net: More graceful finding of `ip'.Daniel Díaz
The ip tool might be provided by another package (such as Busybox), not necessarily implementing the -Version switch. Trying an actual usage (`ip link show') might be a better test that would work with all implementations of `ip'. Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-09-18serial: sccnxp: Fix error handling in sccnxp_probe()Alexey Khoroshilov
sccnxp_probe() returns result of regulator_disable() that may lead to returning zero, while device is not properly initialized. Also the driver enables clocks, but it does not disable it. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18tty: serial: lpuart: avoid report NULL interruptFugang Duan
The current driver register irq in .startup() and free the irq in .shutdown(), then user will see the NULL interrupt output from 'cat /proc/interrupts' after the uart port test completed: ... 41: 515 0 0 0 GICv3 257 Level fsl-lpuart 42: 2 0 0 0 GICv3 258 Level ... It is better to register all the irqs during probe function via devm_request_irq() to avoid to call free_irq(). Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18serial: bcm63xx: fix timing issue.Russell Enderby
Issue where unprintable characters can occur or output is cut off over the serial uart / linux console depending on timing. Problem occurs when changing the serial baud rate when setting up the new console.The bcm63xx driver does a disable and flush of the uart tx fifo while there is data still in the tx fifo. If the tx fifo still has data it is trying to send out, we need to wait until it is empty before disabling and flushing the uart. When we now go to change the uart parameters including speed we check if there is data currently in the tx fifo.If there is was mdelay(10) and check again.If it tries 3 times and still has data in it we just continue and sacrifice the tx fifo buffer. A cleaner and more preferred approach would be to remove : - spin_lock_irqsave() - bcm_uart_disable() - bcm_uart_flush() However it is not clear if the author put those in to fix another underlying issue.As a result this solution is a safer approach. Output before the fix: [0.306000] 14e00520.serial: ttyS0 at MMIO 0x14e00520 (irq = 9, base_baud = 1687500) is a° 0.315000] console[ttyS0] enabled Output verified after the fix: [0.315000] 14e00520.serial: ttyS0 at MMIO 0x14e00520 (irq = 9, base_baud = 1687500) is a bcm63xx_uart [0.334000] console[ttyS0] enabled Signed-off-by: Russell Enderby <rte@gdn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18mxser: fix timeout calculation for low ratesJiri Slaby
Paul reported, that low rates like B300 make the driver to hang in mxser_wait_until_sent. His debugging tackled the issue down to the info->timeout computation in mxser_set_baud. Obviously, ints are used there and they easily overflow with these low rates: B300 makes info->timeout to be -373. So switch all these types to unsigned as it ought to be. And use the u64 domain to perform the computation as in the worst case, we need 35 bits to store the computed value (before division). And use do_div not to break 32 bit kernels. [v2] make it actually build Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Paul <Paul@abelian.netcom.co.uk> Tested-by: <Paul@abelian.netcom.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18serial: sh-sci: document R8A77970 bindingsSergei Shtylyov
R-Car V3M (R8A77970) SoC also has the R-Car gen3 compatible SCIF and HSCIF ports, so document the SoC specific bindings. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18Merge tag 'mmc-v4.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix trivial typo in Kconfig - Fixup initialization of mmc block requests MMC host: - cavium: Fix use-after-free bug reported by KASAN" * tag 'mmc-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: cavium: Fix use-after-free in of_platform_device_destroy mmc: host: fix typo after MMC_DEBUG move mmc: block: Fix incorrectly initialized requests
2017-09-18netfilter: ipset: ipset list may return wrong member count for set with timeoutVishwanath Pai
Simple testcase: $ ipset create test hash:ip timeout 5 $ ipset add test 1.2.3.4 $ ipset add test 1.2.2.2 $ sleep 5 $ ipset l Name: test Type: hash:ip Revision: 5 Header: family inet hashsize 1024 maxelem 65536 timeout 5 Size in memory: 296 References: 0 Number of entries: 2 Members: We return "Number of entries: 2" but no members are listed. That is because mtype_list runs "ip_set_timeout_expired" and does not list the expired entries, but set->elements is never upated (until mtype_gc cleans it up later). Reviewed-by: Joshua Hunt <johunt@akamai.com> Signed-off-by: Vishwanath Pai <vpai@akamai.com> Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-09-18netfilter: nat: Do not use ARRAY_SIZE() on spinlocks to fix zero divGeert Uytterhoeven
If no spinlock debugging options (CONFIG_GENERIC_LOCKBREAK, CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_LOCK_ALLOC) are enabled on a UP platform (e.g. m68k defconfig), arch_spinlock_t is an empty struct, hence using ARRAY_SIZE(nf_nat_locks) causes a division by zero: net/netfilter/nf_nat_core.c: In function ‘nf_nat_setup_info’: net/netfilter/nf_nat_core.c:432: warning: division by zero net/netfilter/nf_nat_core.c: In function ‘__nf_nat_cleanup_conntrack’: net/netfilter/nf_nat_core.c:535: warning: division by zero net/netfilter/nf_nat_core.c:537: warning: division by zero net/netfilter/nf_nat_core.c: In function ‘nf_nat_init’: net/netfilter/nf_nat_core.c:810: warning: division by zero net/netfilter/nf_nat_core.c:811: warning: division by zero net/netfilter/nf_nat_core.c:824: warning: division by zero Fix this by using the CONNTRACK_LOCKS definition instead. Suggested-by: Florian Westphal <fw@strlen.de> Fixes: 8073e960a03bf7b5 ("netfilter: nat: use keyed locks") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-09-18driver core: platform: Don't read past the end of "driver_override" bufferNicolai Stange
When printing the driver_override parameter when it is 4095 and 4094 bytes long, the printing code would access invalid memory because we need count+1 bytes for printing. Reject driver_override values of these lengths in driver_override_store(). This is in close analogy to commit 4efe874aace5 ("PCI: Don't read past the end of sysfs "driver_override" buffer") from Sasha Levin. Fixes: 3d713e0e382e ("driver core: platform: add device binding path 'driver_override'") Cc: stable@vger.kernel.org # v3.17+ Signed-off-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18Revert "xhci: Limit USB2 port wake support for AMD Promontory hosts"Kai-Heng Feng
This reverts commit dec08194ffeccfa1cf085906b53d301930eae18f. Commit dec08194ffec ("xhci: Limit USB2 port wake support for AMD Promontory hosts") makes all high speed USB ports on ASUS PRIME B350M-A cease to function after enabling runtime PM. All boards with this chipsets will be affected, so revert the commit. The original patch was added to stable 4.9, 4.11 and 4.12 and needs to reverted from there as well Cc: <stable@vger.kernel.org> # 4.9+ Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18xhci: set missing SuperSpeedPlus Link Protocol bit in roothub descriptorMathias Nyman
A SuperSpeedPlus roothub needs to have the Link Protocol (LP) bit set in the bmSublinkSpeedAttr[] entry of a SuperSpeedPlus descriptor. If the xhci controller has an optional Protocol Speed ID (PSI) table then that will be used as a base to create the roothub SuperSpeedPlus descriptor. The PSI table does not however necessary contain the LP bit so we need to set it manually. Check the psi speed and set LP bit if speed is 10Gbps or higher. We're not setting it for 5 to 10Gbps as USB 3.1 specification always mention SuperSpeedPlus for 10Gbps or higher, and some SSIC USB 3.0 speeds can be over 5Gbps, such as SSIC-G3B-L1 at 5830 Mbps Cc: <stable@vger.kernel.org> # 4.6+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18xhci: Fix sleeping with spin_lock_irq() held in ASmedia 1042A workaroundMathias Nyman
The flow control workaround for ASM1042A xHC hosts sleeps between register polling. The workaround gets called in several places, among them with spin_lock_irq() held when xHC host is resumed or hoplug removed. This was noticed as kernel panics at resume on a Dell XPS15 9550 with TB16 thunderbolt dock. Avoid sleeping with spin_lock_irq() held, use udelay() instead The original workaround was added to 4.9 and 4.12 stable releases, this patch needs to be applied to those as well. Fixes: 9da5a1092b13 ("xhci: Bad Ethernet performance plugged in ASM1042A host") Cc: <stable@vger.kernel.org> #4.9+ Reported-by: Jose Marino <marinoj@nso.edu> Tested-by: Jose Marino <marinoj@nso.edu> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18usb: host: xhci-plat: allow sysdev to inherit from ACPIAdam Wallis
Commit 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration") updated the method determining DMA for XHCI from sysdev. However, this patch broke the ability to enumerate the FWNODE from parent ACPI devices from the child plat XHCI device. Currently, xhci_plat is not set up properly when the parent device is an ACPI node. The conditions that xhci_plat_probe should satisfy are 1. xhci_plat comes from firmware 2. xhci_plat is child of a device from firmware (dwc3-plat) 3. xhci_plat is grandchild of a pci device (dwc3-pci) Case 2 is covered when the child is an OF node (by checking sysdev->parent->of_node), however, an ACPI parent will return NULL in the of_node check and will thus not result in sysdev being set to sysdev->parent [ 17.591549] xhci-hcd: probe of xhci-hcd.6.auto failed with error -5 This change adds a check for ACPI to completely allow for condition 2. This is done by first checking if the parent node is of type ACPI (e.g., dwc3-plat) and set sysdev to sysdev->parent if either of the two following conditions are met: 1: If fwnode is empty (in the case that platform_device_add_properties was not called on the allocated platform device) 2: fwnode exists but is not of type ACPI (this would happen if platform_device_add_properties was called on the allocated device. Instead of type FWNODE_ACPI, you would end up with FWNODE_PDATA) Cc: stable@vger.kernel.org #4.12.x Cc: stable@vger.kernel.org #4.13.x Fixes: 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration") Tested-by: Thang Q. Nguyen <tqnguyen@apm.com> Signed-off-by: Adam Wallis <awallis@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18xhci: fix wrong endpoint ESIT value shown in tracingMathias Nyman
Read the endpiont ESIT from endpiont context using correct macro. Add a macro for reading the high bits of ESIT for Large ESIT Payload Capable hosts (LEC=1) Cc: <stable@vger.kernel.org> # 4.12 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18usb: pci-quirks.c: Corrected timeout values used in handshakeJim Dickerson
Servers were emitting failed handoff messages but were not waiting the full 1 second as designated in section 4.22.1 of the eXtensible Host Controller Interface specifications. The handshake was using wrong units so calls were made with milliseconds not microseconds. Comments referenced 5 seconds not 1 second as in specs. The wrong units were also corrected in a second handshake call. Cc: <stable@vger.kernel.org> Signed-off-by: Jim Dickerson <jim.dickerson@hpe.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18xhci: fix finding correct bus_state structure for USB 3.1 hostsMathias Nyman
xhci driver keeps a bus_state structure for each hcd (usb2 and usb3) The structure is picked based on hcd speed, but driver only compared for HCD_USB3 speed, returning the wrong bus_state for HCD_USB31 hosts. This caused null pointer dereference errors in bus_resume function. Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18usb: xhci: Free the right ring in xhci_add_endpoint()Lu Baolu
In the xhci_add_endpoint(), a new ring was allocated and saved at xhci_virt_ep->new_ring. Hence, when error happens, we need to free the allocated ring before returning error. Current code frees xhci_virt_ep->ring instead of the new_ring. This patch fixes this. Cc: <stable@vger.kernel.org> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18base: arch_topology: fix section mismatch build warningsSudeep Holla
Commit 2ef7a2953c81 ("arm, arm64: factorize common cpu capacity default code") introduced init_cpu_capacity_callback and init_cpu_capacity_notifier which are referenced from initcall and are missing __init{,data} annotations resulting the below section mismatch build warnings. "WARNING: vmlinux.o(.text+0xbab790): Section mismatch in reference from the function init_cpu_capacity_callback() to the variable .init.text:$x The function init_cpu_capacity_callback() references the variable __init $x. This is often because init_cpu_capacity_callback lacks a __init annotation or the annotation of $x is wrong." This patch fixes the above build warnings by adding the required annotations. Fixes: 2ef7a2953c81 ("arm, arm64: factorize common cpu capacity default code") Cc: Juri Lelli <juri.lelli@arm.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18driver core: suppress sending MODALIAS in UNBIND ueventsDmitry Torokhov
The current udev rules cause modules to be loaded on all device events save for "remove". With the introduction of KOBJ_BIND/KOBJ_UNBIND this causes issues, as driver modules that have devices bound to their drivers get immediately reloaded, and it appears to the user that module unloading doe snot work. The standard udev matching rule is foillowing: ENV{MODALIAS}=="?*", RUN{builtin}+="kmod load $env{MODALIAS}" Given that MODALIAS data is not terribly useful for UNBIND event, let's zap it from the generated uevent environment until we get userspace updated with the correct udev rule that only loads modules on "add" event. Reported-by: Jakub Kicinski <kubakici@wp.pl> Tested-by: Jakub Kicinski <kubakici@wp.pl> Fixes: 1455cf8dbfd0 ("driver core: emit uevents when device is bound ...") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18nvmem: add missing of_node_put() in of_nvmem_cell_get()Masahiro Yamada
of_get_next_parent() increments the refcount of the returned node. It should be put when done. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18nvmem: core: return EFBIG on out-of-range writeGuy Shapiro
When writing data that exceeds the nvmem size to a nvmem sysfs file using the sh redirection operator >, the shell hangs, trying to write the out-of-range bytes endlessly. Fix the problem by returning EFBIG described in man 2 write. Similar change was done for binary sysfs files on commit 0936896056365349afa867c16e9f9100a6707cbf Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Cc: linux-api@vger.kernel.org Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18auxdisplay: charlcd: properly restore atomic counter on error pathWilly Tarreau
Commit f4757af ("staging: panel: Fix single-open policy race condition") introduced in 3.19-rc1 attempted to fix a race condition on the open, but failed to properly do it and used to exit without restoring the semaphore. This results in -EBUSY being returned after the first open error until the module is reloaded or the system restarted (ie: consecutive to a dual open resulting in -EBUSY or to a permission error). [ Note for stable maintainers: the code moved from drivers/misc/panel.c to drivers/auxdisplay/{charlcd,panel}.c during 4.12. The patch easily applies there (modulo the renamed atomic counter) but I can provide a tested backport if desired. ] Fixes: f4757af85 # 3.19-rc1 Cc: stable@vger.kernel.org Cc: Mariusz Gorski <marius.gorski@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18binder: fix memory corruption in binder_transaction binderXu YiPing
commit 7a4408c6bd3e ("binder: make sure accesses to proc/thread are safe") made a change to enqueue tcomplete to thread->todo before enqueuing the transaction. However, in err_dead_proc_or_thread case, the tcomplete is directly freed, without dequeued. It may cause the thread->todo list to be corrupted. So, dequeue it before freeing. Fixes: 7a4408c6bd3e ("binder: make sure accesses to proc/thread are safe") Signed-off-by: Xu YiPing <xuyiping@hisilicon.com> Signed-off-by: Todd Kjos <tkjos@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18binder: fix an ret value overrideXu YiPing
commit 372e3147df70 ("binder: guarantee txn complete / errors delivered in-order") incorrectly defined a local ret value. This ret value will be invalid when out of the if block Fixes: 372e3147df70 ("binder: refactor binder ref inc/dec for thread safety") Signed-off-by: Xu YiPing <xuyiping@hislicon.com> Signed-off-by: Todd Kjos <tkjos@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18android: binder: fix type mismatch warningArnd Bergmann
Allowing binder to expose the 64-bit API on 32-bit kernels caused a build warning: drivers/android/binder.c: In function 'binder_transaction_buffer_release': drivers/android/binder.c:2220:15: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] fd_array = (u32 *)(parent_buffer + fda->parent_offset); ^ drivers/android/binder.c: In function 'binder_translate_fd_array': drivers/android/binder.c:2445:13: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] fd_array = (u32 *)(parent_buffer + fda->parent_offset); ^ drivers/android/binder.c: In function 'binder_fixup_parent': drivers/android/binder.c:2511:18: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] This adds extra type casts to avoid the warning. However, there is another problem with the Kconfig option: turning it on or off creates two incompatible ABI versions, a kernel that has this enabled cannot run user space that was built without it or vice versa. A better solution might be to leave the option hidden until the binder code is fixed to deal with both ABI versions. Fixes: e8d2ed7db7c3 ("Revert "staging: Fix build issues with new binder API"") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18xen: don't compile pv-specific parts if XEN_PV isn't configuredJuergen Gross
xenbus_client.c contains some functions specific for pv guests. Enclose them with #ifdef CONFIG_XEN_PV to avoid compiling them when they are not needed (e.g. on ARM). Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-09-18mtd: nand: remove unused blockmask variableCorentin Labbe
This patch fix the following build warning: drivers/mtd/nand/nand_base.c:2671:30: attention : variable ‘blockmask’ set but not used [-Wunused-but-set-variable] Fixes: 0b4773fd1649 ("mtd: nand: Drop unused cached programming support") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-09-18PM / QoS: Use the correct variable to check the QoS request typeJan H. Schönherr
Use the actual function argument for the validation of the request type, instead of the type field in a fresh (supposedly zero-initialized) request structure. Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-18ACPI / PMIC: Add code reviewers to MAINTAINERSRafael Wysocki
Andy and Mika review code changes under drivers/acpi/pmic/ on a regular basis and I rely on their help with that, so add them as code reviwewers for that part of the kernel. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-09-18driver core: Fix link to device power management documentationGeert Uytterhoeven
Correct location as of commit 2728b2d2e5be4b82 (PM / core / docs: Convert sleep states API document to reST). Fixes: 2728b2d2e5be4b82 (PM / core / docs: Convert sleep states API document to reST) Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-18usb: dwc3: ep0: fix DMA starvation by assigning req->trb on ep0Felipe Balbi
If we don't assign a TRB to ep0 requests, we won't be able to unmap the request later on resulting in starvation of DMA resources. Fixes: 4a71fcb8ac5f ("usb: dwc3: gadget: only unmap requests from DMA if mapped") Reported-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Tested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-09-18staging: vchiq_2835_arm: Fix NULL ptr dereference in free_pagelistStefan Wahren
This fixes a NULL pointer dereference on RPi 2 with multi_v7_defconfig. The function page_address() could return NULL with enabled CONFIG_HIGHMEM. So fix this by using kmap() instead. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 71bad7f08641 ("staging: add bcm2708 vchiq driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18staging: speakup: fix speakup-r empty line lockupOkash Khawaja
When cursor is at beginning of an empty or whitespace-only line and speakup-r typed, kernel locks up. This happens because deadlock of in input_event function over dev->event_lock, as demonstrated by lockdep logs. The reason for that is speakup simulates a down arrow - because cursor is at an empty line - while inside key press notifier handler which is ultimately triggered from input_event function. The simulated key press leads to input_event being called again, this time under its own context. So the spinlock is dev->event_lock is acquired while still being held. This patch ensures that key press is not simulated from inside key press notifier handler. Instead it delegates to cursor_timer. It starts the timer and passes RA_DOWN_ARROW as argument. When timer handler runs and sees RA_DOWN_ARROW, it will then call kbd_fakekey2(RA_DOWN_ARROW) which will correctly simulate the keypress inside timer context. When not inside key press notifier callback, the behaviour will remain the same as before this patch. Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18staging: pi433: Move limit check to switch default to kill warningGeert Uytterhoeven
With gcc-4.1.2: drivers/staging/pi433/rf69.c: In function ‘rf69_set_dio_mapping’: drivers/staging/pi433/rf69.c:566: warning: ‘regaddr’ may be used uninitialized in this function drivers/staging/pi433/rf69.c:565: warning: ‘shift’ may be used uninitialized in this function drivers/staging/pi433/rf69.c:564: warning: ‘mask’ may be used uninitialized in this function While this is a false positive, it can easily be fixed by moving the limit check into the "default" case of the switch statement. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18staging: r8822be: fix null pointer dereferences with a null driver_adapterColin Ian King
The call to _rtl_dbg_trace via macro HALMAC_RT_TRACE will trigger a null pointer deference on a null driver_adapter. Fix this by assigning driver_adapter earlier to halmac_adapter->driver_adapter before the tracing call so that a non-null driver_adapter is passed instead. I should have spotted these with an earlier patch I sent, but I overlooked these in the rather large CoverityScan logs. Detected by CoverityScan, CID#1454550, CID#1454554, CID#1454565, CID#1454591, CID#1454598 ("Explicit null dereferenced") Fixes: 938a0447f094 ("staging: r8822be: Add code for halmac sub-driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18staging: mt29f_spinand: Enable the read ECC before program the pageArun Nagendran
Current program_page function did following operation: 1. read page (with ECC OFF) 2. modify the page 3. write the page (with ECC ON) For some case(buggy flash Chip), while read the page without ECC ON, we may read the page with bit flip error and modify that bad page without knowing the bit flip error on that page. also we re-calculate the hash for bad page and write it. This could bring potential in-consistency problem with Flash data. Verify this logic with GIGA DEVICE Part(GD5F2GQ4RCFIG): we see this in-conststency problem wit Giga Device and fix on this patch resovle that issue. Signed-off-by: Arun Nagendran <arunrasppi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-18staging: unisys/visorbus: add __init/__exit annotationsArnd Bergmann
gcc-4.6 causes a harmless warning about the init function: WARNING: vmlinux.o(.text+0xed62c2): Section mismatch in reference from the function init_unisys() to the function .init.text:visorutil_spar_detect() The function init_unisys() references the function __init visorutil_spar_detect(). This is often because init_unisys lacks a __init annotation or the annotation of visorutil_spar_detect is wrong. It appears that newer versions inline visorutil_spar_detect(), end up with an empty __init section. This marks the module entry points as __init and __exit respectively, which avoids the warning and slightly reduces the runtime code size. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-14 13:47:18 +0000