summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-25net: fec: make driver endian-safeJohannes Berg
The driver treats the device descriptors as CPU-endian, which appears to be correct with the default endianness on both ARM (typically LE) and PowerPC (typically BE) SoCs, indicating that the hardware block is generated differently. Add endianness annotations and byteswaps as necessary. It's not clear that the ifdef there really is correct and shouldn't just be #ifdef CONFIG_ARM, but I also can't test on anything but the i.MX6 HummingBoard where this gets it working with a BE kernel. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25net: dsa: fix mv88e6xxx switchesRussell King
Since commit 76e398a62712 ("net: dsa: use switchdev obj for VLAN add/del ops"), the Marvell 88E6xxx switch has been unable to pass traffic between ports - any received traffic is discarded by the switch. Taking a port out of bridge mode and configuring a vlan on it also the port to start passing traffic. With the debugfs files re-instated to allow debug of this issue by comparing the register settings between the working and non-working case, the reason becomes clear: GLOBAL GLOBAL2 SERDES 0 1 2 3 4 5 6 - 7: 1111 707f 2001 2 2 2 2 2 0 2 + 7: 1111 707f 2001 1 1 1 1 1 0 1 Register 7 for the ports is the default vlan tag register, and in the non-working setup, it has been set to 2, despite vlan 2 not being configured. This causes the switch to drop all packets coming in to these ports. The working setup has the default vlan tag register set to 1, which is the default vlan when none is configured. Inspection of the code reveals why. The code prior to this commit was: - for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { ... - if (!err && vlan->flags & BRIDGE_VLAN_INFO_PVID) - err = ds->drv->port_pvid_set(ds, p->port, vid); but the new code is: + for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { ... + } ... + if (pvid) + err = _mv88e6xxx_port_pvid_set(ds, port, vid); This causes the new code to always set the default vlan to one higher than the old code. Fix this. Fixes: 76e398a62712 ("net: dsa: use switchdev obj for VLAN add/del ops") Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-2582xx: FCC: Fixing a bug causing to FCC port lock-up (second try)Martin Roth
This is an additional patch to the one already submitted recently. The previous patch was not complete, and the FCC port lock-up scenario has been reproduced in lab. I had an opportunity to check the current patch in lab and the FCC port lock no longer freezes, while the previous patch still locks-up the FCC port. The current patch fixes a pointer arithmetic bug (second bug in the same line), which leads FCC port lock-up during underrun/collision handling. Within the tx_startup() function in mac-fcc.c, the address of last BD is not calculated correctly. As a result of wrong calculation of the last BD address, the next transmitted BD may be set to an area out of the transmit BD ring. This actually causes to port lock-up and it is not recoverable. Signed-off-by: Martin Roth <martin.roth@motorolasolutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25Merge branch 'enable-devices' into omap-for-v4.5/fixesTony Lindgren
2016-01-25ipv4+ipv6: Make INET*_ESP select CRYPTO_ECHAINIVThomas Egerer
The ESP algorithms using CBC mode require echainiv. Hence INET*_ESP have to select CRYPTO_ECHAINIV in order to work properly. This solves the issues caused by a misconfiguration as described in [1]. The original approach, patching crypto/Kconfig was turned down by Herbert Xu [2]. [1] https://lists.strongswan.org/pipermail/users/2015-December/009074.html [2] http://marc.info/?l=linux-crypto-vger&m=145224655809562&w=2 Signed-off-by: Thomas Egerer <hakke_007@gmx.de> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-25drm/crtc-helper: Add caveat to disable_unused_functions docDaniel Vetter
This shouldn't be used by atomic drivers any more, it confuses the state tracking. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452695476-31147-1-git-send-email-daniel.vetter@ffwll.ch Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-01-25drm/gma500: Remove empty preclose hookDaniel Vetter
I'm auditing them all, empty ones just confuse ... Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Acked-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452548477-15905-9-git-send-email-daniel.vetter@ffwll.ch Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-01-25drm/armada: Remove NULL open/pre/postclose hooksDaniel Vetter
The compiler will do this, but the void hits when grepping all the hooks for a subsystem wide audit are slightly annoying. So remove them for next time around. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452548477-15905-8-git-send-email-daniel.vetter@ffwll.ch Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-01-25drm/fsl: Remove preclose hookDaniel Vetter
Doesn't do anything, but annoys when auditing them all. Cc: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452548477-15905-7-git-send-email-daniel.vetter@ffwll.ch Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-01-25drm: Create drm_send_event helpersDaniel Vetter
Use them in the core vblank code and exynos/vmwgfx drivers. Note that the difference between wake_up_all and _interruptible in vmwgfx doesn't matter since the only waiter is the core code in drm_fops.c. And that is interruptible. v2: Adjust existing kerneldoc too. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Acked-by: Daniel Stone <daniels@collabora.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Inki Dae <inki.dae@samsung.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452548477-15905-6-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [danvet: Squash in compile fixup, spotted by 0-day.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-25ARM: OMAP: Add PWM dmtimer platform data quirksNeil Armstrong
In order to set the currently platform dependent dmtimer functions pointers as platform data for the pwm-omap-dmtimer platform driver, add it to plat-omap auxdata_lookup table. Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-25[media] nuvoton-cir: fix setting ioport base addressHeiner Kallweit
At least on Zotac CI321 ACPI provides an ioport range for the wake up part but accessing these ioports has no effect. Instead the ioport base address is set to another value already (0xa20 in my case) and accessing this ioport range works. Therefore set a new ioport base address only if the current ioport base address is 0 (register reset default). The need to use the existing base address instead of trying to set an own one doesn't seem to be limited to this specific device as other drivers like hwmon/nct6775 do it the same way. This change was successfully tested on the mentioned device. And the change should be generic enough to not break the driver for other chips (however due to lack of appropriate hardware I wasn't able to test this). [mchehab@osg.samsung.com: Tested on Intel NUC NUC5i7RYB with BIOS version RYBDWi35.86A.0350.2015.0812.1722] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] nuvoton-cir: remove unneeded call to nvt_set_cir_irenHeiner Kallweit
Calling nvt_set_cir_iren separately is not needed as this is done by nvt_cir_regs_init. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] nuvoton-cir: remove unneeded EFM operation in nvt_cir_isrHeiner Kallweit
Selecting the logical device in the interrupt handler is not needed as no configuration register is accessed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] nuvoton-cir: improve logical device handlingHeiner Kallweit
Only enable the logical devices after the registers have been initialized. The call to nvt_enable_logical_dev in nvt_resume is not needed as this is done implicitely by nvt_cir_regs_init now. [mchehab@osg.samsung.com: fixed multiline comment to kernel CodingStyle] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] nuvoton-cir: factor out logical device enablingHeiner Kallweit
Factor out enabling of a logical device. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] nuvoton-cir: use IR_DEFAULT_TIMEOUT and consider SAMPLE_PERIODHeiner Kallweit
Switch to using the recently introduced IR default timeout value (IR_DEFAULT_TIMEOUT) and consider the value of SAMPLE_PERIOD when calculating the limit count register value. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] nuvoton-cir: fix clearing wake fifoHeiner Kallweit
At least on NVT6779D clearing the wake fifo works in learning mode only (although this condition is not mentioned in the chip spec). Setting the clear fifo bit has no effect in wake up mode. Even if clearing the wake fifo should work in wake up mode on other chips this workaround doesn't hurt. If needed the caller of nvt_clear_cir_wake_fifo has to take care of locking. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] nuvoton-cir: factor out logical device disablingHeiner Kallweit
Factor out disabling of a logical device. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] nuvoton-cir: simplify nvt_cir_tx_inactiveHeiner Kallweit
Simplify nvt_cir_tx_inactive. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] nuvoton-cir: simplify nvt_select_logical_ devHeiner Kallweit
Use nvt_cr_write to simplify nvt_select_logical_ dev. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] nuvoton-cir: use request_muxed_region for accessing EFM registersHeiner Kallweit
The two EFM ioports are accessed by drivers for other parts of the Nuvoton Super-IO chips too. Therefore access to these ioports needs to be protected by using request_muxed_region (like it's implemented e.g. in hwmon/nct6775 already). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] msi2500: Delete an unnecessary check in msi2500_set_usb_adc()Markus Elfring
This issue was detected by using the Coccinelle software. Return the value from a call of the msi2500_ctrl_msg() function without using an extra check for the variable "ret" at the end. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] r820t: Delete an unnecessary variable initialisation in ↵Markus Elfring
generic_set_freq() The variable "rc" will be set to an appropriate value from a call of the r820t_set_tv_standard() function. Thus let us omit the explicit initialisation at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] tuners: Refactoring for m88rs6000t_sleep()Markus Elfring
This issue was detected by using the Coccinelle software. 1. Let us return directly if a call of the regmap_write() function failed. 2. Delete the jump label "err" then. 3. Return zero as a constant at the end. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] si2165: Refactoring for si2165_writereg_mask8()Markus Elfring
This issue was detected by using the Coccinelle software. 1. Let us return directly if a call of the si2165_readreg8() function failed. 2. Reduce the scope for the local variables "ret" and "tmp" to one branch of an if statement. 3. Delete the jump label "err" then. 4. Return the value from a call of the si2165_writereg8() function without using an extra assignment for the variable "ret" at the end. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] media: i2c: ov2659: speedup probe if no device connectedGrygorii Strashko
The ov2659 driver performs device detection and initialization in the following way: - send reset command REG_SOFTWARE_RESET - load array of predefined register's setting (~150 values) - read device version REG_SC_CHIP_ID_H/REG_SC_CHIP_ID_L - check version and exit if invalid. As result, for not connected device there will be >~150 i2c transactions executed before device version checking and exit (there are no failures detected because ov2659 declared as I2C_CLIENT_SCCB and NACKs are ignored in this case). Let's fix that by checking the chip version first and start initialization only if it's supported. Cc: Benoit Parrot <bparrot@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] gsc-m2m: Use an unsigned data type for a variableMarkus Elfring
The data type "int" was used by the variable "ret" in the gsc_m2m_poll() function despite of the aspect that the type "unsigned int" will usually be needed for the return value from a call of the v4l2_m2m_poll() function. Improve this implementation detail by addition of the type modifier then. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] staging: media: lirc: space around operatorSudip Mukherjee
checkpatch complains about missing space around operators. [mchehab@osg.samsung.com: removed obsolete hunks] Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] staging: media: lirc: no space after castSudip Mukherjee
checkpatch complains about space after type cast. [mchehab@osg.samsung.com: removed an obsolete hunk] Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] staging: media: lirc: replace NULL comparisons with !varSudip Mukherjee
A NULL comparison can be written as if (var) or if (!var). Reported by checkpatch. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] mt9v032: Add reset and standby gpiosMarkus Pargmann
Add optional reset and standby gpios. The reset gpio is used to reset the chip in power_on(). The standby gpio is not used currently. It is just unset, so the chip is not in standby. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] davinci: ccdc_update_raw_params() frees the wrong thingAl Viro
Passing a physical address to free_pages() is a bad idea. config_params->fault_pxl.fpc_table_addr is set to virt_to_phys() of __get_free_pages() return value; what we should pass to free_pages() is its phys_to_virt(). ccdc_close() does that properly, but ccdc_update_raw_params() doesn't. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] tvp5150: Fix breakage for serial usageMauro Carvalho Chehab
changeset 460b6c0831cb ("tvp5150: Add s_stream subdev operation support") broke for em28xx-based devices with uses tvp5150. On those devices, touching the TVP5150_MISC_CTL register causes em28xx to stop streaming. I suspect that it uses the 27 MHz clock provided by tvp5150 to feed em28xx. So, change the logic to do nothing on s_stream if the tvp5150 is not set up to work with V4L2_MBUS_PARALLEL. Tested with Hauppauge WinTV USB 2 model 42012 Rev. C186 (USB ID: 2040:4200). Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25tracing/dma-buf/fence: Fix timeline str value on fence_annotate_wait_onGustavo Padovan
timeline was wrongly assigned with ->get_driver_name(). Link: http://lkml.kernel.org/r/1453376895-30747-1-git-send-email-gustavo@padovan.org Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-01-25drm/radeon: Ensure radeon bo is unreserved in radeon_gem_va_ioctlMatthew Dawson
Found with lockdep while testing gpu reset. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Matthew Dawson <matthew@mjdsystems.ca> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-25btrfs: add free space tree to the cow-only listDavid Sterba
Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-25btrfs: add free space tree to lockdep classesDavid Sterba
Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-25ARM: dts: orion5x: gpio pin fixes for linkstation lswtglRoger Shimizu
Here're a few gpio pin related fixes: - remove pinctrl-0 definition from pinctrl, since those pins are used in other places such as gpio-fan and regulators. - keep initial state of power led - fix for alarm pin of gpio-fan. Fixes: dc57844a736f ("ARM: dts: orion5x: add buffalo linkstation ls-wtgl") Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25[media] : cxd2830r: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] exynos4-is: make VIDEO_SAMSUNG_EXYNOS4_IS tristateArnd Bergmann
With CONFIG_V4L2=m and VIDEO_SAMSUNG_EXYNOS4_IS=y, we can select the individual drivers as built-in code when that should not be possible: drivers/built-in.o: In function `s5pcsis_set_fmt': policy.c:(.text+0x13afdc): undefined reference to `v4l_bound_align_image' drivers/built-in.o: In function `s5pcsis_probe': policy.c:(.text+0x13b440): undefined reference to `v4l2_of_parse_endpoint' policy.c:(.text+0x13b72c): undefined reference to `v4l2_subdev_init' Changing VIDEO_SAMSUNG_EXYNOS4_IS to tristate means that the dependency from CONFIG_V4L2 propates to the individual Kconfig symbols and they can only be built as loadable modules if V4L2 or any other of the dependencies itself is a module. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] si2165: Reject DVB-T bandwidth auto modeMatthias Schwarzott
The si2165 does not support bandwidth auto-detection. Reject the request. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] dw2102: use the new USB ID Terratec Cinergy S2 macrosMauro Carvalho Chehab
Now that this was defined at usb-id.h, update the values for USB_PID_TERRATEC_CINERGY_S2_R1 and USB_PID_TERRATEC_CINERGY_S2_R2. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] Add support for Terratec Cinergy S2 Rev.4Benjamin Larsson
Also Add Terratec Cinergy S2 usb id's Signed-off-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] media: rc: raw: improve FIFO handlingHeiner Kallweit
The FIFO is used for ir_raw_event records, however for some historic reason the FIFO is used on a per byte basis. IMHO this adds unneeded complexity. Therefore set up the FIFO for ir_raw_event records. This also allows to define the FIFO statically as part of ir_raw_event_ctrl instead of having to allocate the FIFO dynamically. In addition: - When writing into the FIFO and it's full return ENOSPC instead of ENOMEM thus making it easier to tell between "FIFO full" and "Dynamic memory allocation failed" when the error is propagated to a higher level. Also add an error message. - When reading from the FIFO check whether it's empty. This is not strictly needed here but kfifo_out is annotated "must check" anyway. Successfully tested it with the nuvoton-cir driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25of: drop symbols declared by _OF_DECLARE() from modulesMasahiro Yamada
The users of this macro (OF_EARLYCON_DECLARE, CLK_OF_DECLARE, IRQCHIP_DECLARE, etc.) are only parsed in the early boot stage. Such symbols contained in modules are never used. This commit fixes the link error introduced by commit b8d20e06eaad ("serial: 8250_uniphier: add earlycon support"); the combination of CONFIG_SERIAL_8250_UNIPHIER=m and CONFIG_SERIAL_8250_CONSOLE=y fails to link: ERROR: "early_serial8250_setup" [drivers/tty/serial/8250/8250_uniphier.ko] undefined! Fixes: b8d20e06eaad ("serial: 8250_uniphier: add earlycon support") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org>
2016-01-25[media] media: rc: nuvoton: mark wakeup-related resourcesHeiner Kallweit
When requesting resources use different names for the normal and the wakeup part. This makes it easier to interpret the output of e.g. /proc/interrupts and /proc/ioports. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25[media] dib8000: Add support for Mygica/Geniatech S2870Nicolas Sugino
MyGica/Geniatech S2870 is very similar to the S870 but with dual tuner. The card is recognised as Geniatech STK8096-PVR. [mchehab@osg.samsung.com: Fix some checkpatch.pl issues] Signed-off-by: Nicolas Sugino <nsugino@3way.com.ar> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25MAINTAINERS: Add missing platform maintainers for dts filesRob Herring
Platform dts files need to be reviewed primarily by the platform maintainers as dts files typically go in thru their trees. Add the missing paths where there are existing maintainers listed. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Santosh Shilimkar<ssantosh@kernel.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Andy Gross <agross@codeaurora.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-01-25ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vlRoger Shimizu
The GPIOs controlling the LEDs, listed below, are active high, not low: - gpio-leds: "lswvl:red:alarm" pin - gpio-leds: "lswvl:red:func" pin - gpio-leds: "lswvl:amber:info" pin - gpio-leds: "lswvl:blue:func" pin - gpio-leds: "lswvl:red:hdderr{0,1}" pin Fixes: c43379e150aa ("ARM: dts: add buffalo linkstation ls-wvl/vl") Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
generated by cgit (git 2.34.1) at 2025-09-14 05:40:09 +0000