summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-21crypto: hash - Fix the pointer voodoo in unaligned ahashMarek Vasut
Add documentation for the pointer voodoo that is happening in crypto/ahash.c in ahash_op_unaligned(). This code is quite confusing, so add a beefy chunk of documentation. Moreover, make sure the mangled request is completely restored after finishing this unaligned operation. This means restoring all of .result, .base.data and .base.complete . Also, remove the crypto_completion_t complete = ... line present in the ahash_op_unaligned_done() function. This type actually declares a function pointer, which is very confusing. Finally, yet very important nonetheless, make sure the req->priv is free()'d only after the original request is restored in ahash_op_unaligned_done(). The req->priv data must not be free()'d before that in ahash_op_unaligned_finish(), since we would be accessing previously free()'d data in ahash_op_unaligned_done() and cause corruption. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21crypto: caam - Fix first parameter to caam_init_rngHerbert Xu
Found by the kbuild test robot, the first argument to caam_init_rng has a spurious ampersand. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21KVM: Bump KVM_MAX_IRQ_ROUTES for s390Cornelia Huck
The maximum number for irq routes is currently 1024, which is a bit on the small size for s390: We support up to 4 x 64k virtual devices with up to 64 queues, and we need one route for each of the queues if we want to operate it via irqfd. Let's bump this to 4k on s390 for now, as this at least covers the saner setups. We need to find a more general solution, though, as we can't just grow the routing table indefinitly. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-03-21KVM: s390: irq routing for adapter interrupts.Cornelia Huck
Introduce a new interrupt class for s390 adapter interrupts and enable irqfds for s390. This is depending on a new s390 specific vm capability, KVM_CAP_S390_IRQCHIP, that needs to be enabled by userspace. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-03-21KVM: s390: adapter interrupt sourcesCornelia Huck
Add a new interface to register/deregister sources of adapter interrupts identified by an unique id via the flic. Adapters may also be maskable and carry a list of pinned pages. These adapters will be used by irq routing later. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-03-21KVM: Add per-vm capability enablement.Cornelia Huck
Allow KVM_ENABLE_CAP to act on a vm as well as on a vcpu. This makes more sense when the caller wants to enable a vm-related capability. s390 will be the first user; wire it up. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-03-21doc: fix double wordsMasanari Iida
Fix double words "the the" in various files within Documentations. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-03-21igb: Unset IGB_FLAG_HAS_MSIX-flag when falling back to msi-onlyChristoph Paasch
Prior to cd14ef54d25 (igb: Change to use statically allocated array for MSIx entries), having msix_entries different from NULL was an indicator that MSIX is enabled. In igb_set_interrupt_capabiliy we may fall back to MSI-only. Prior to the above patch msix_entries was set to NULL by igb_reset_interrupt_capability. However, now we are checking the flag for IGB_FLAG_HAS_MSIX and so the stack gets completly confused: [ 42.659791] ------------[ cut here ]------------ [ 42.715032] WARNING: CPU: 7 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x15c/0x1fb() [ 42.848263] NETDEV WATCHDOG: eth0 (igb): transmit queue 0 timed out [ 42.923253] Modules linked in: [ 42.959875] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 3.14.0-rc2-mptcp #437 [ 43.043184] Hardware name: HP ProLiant DL165 G7, BIOS O37 01/26/2011 [ 43.119215] 0000000000000108 ffff88023fdc3da8 ffffffff81487847 0000000000000108 [ 43.208165] ffff88023fdc3df8 ffff88023fdc3de8 ffffffff81034e7d ffff88023fdc3dd8 [ 43.297120] ffffffff813fff10 ffff880236018000 ffff880236b178c0 0000000000000008 [ 43.386071] Call Trace: [ 43.415303] <IRQ> [<ffffffff81487847>] dump_stack+0x49/0x62 [ 43.484174] [<ffffffff81034e7d>] warn_slowpath_common+0x77/0x91 [ 43.556049] [<ffffffff813fff10>] ? dev_watchdog+0x15c/0x1fb [ 43.623759] [<ffffffff81034f2b>] warn_slowpath_fmt+0x41/0x43 [ 43.692511] [<ffffffff813fff10>] dev_watchdog+0x15c/0x1fb [ 43.758141] [<ffffffff813ffdb4>] ? __netdev_watchdog_up+0x64/0x64 [ 43.832091] [<ffffffff8103cd04>] call_timer_fn+0x17/0x6f [ 43.896682] [<ffffffff8103cebe>] run_timer_softirq+0x162/0x1a2 [ 43.967511] [<ffffffff81038520>] __do_softirq+0xcd/0x1cc [ 44.032104] [<ffffffff81038689>] irq_exit+0x3a/0x48 [ 44.091492] [<ffffffff81026d43>] smp_apic_timer_interrupt+0x43/0x50 [ 44.167525] [<ffffffff8148c24a>] apic_timer_interrupt+0x6a/0x70 [ 44.239392] <EOI> [<ffffffff8100992c>] ? default_idle+0x6/0x8 [ 44.310343] [<ffffffff81009b31>] arch_cpu_idle+0x13/0x18 [ 44.374934] [<ffffffff81066126>] cpu_startup_entry+0xa7/0x101 [ 44.444724] [<ffffffff81025660>] start_secondary+0x1b2/0x1b7 [ 44.513472] ---[ end trace a5a075fd4e7f854f ]--- [ 44.568753] igb 0000:04:00.0 eth0: Reset adapter [ 46.206945] random: nonblocking pool is initialized [ 46.465670] irq 44: nobody cared (try booting with the "irqpoll" option) [ 46.545862] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G W 3.14.0-rc2-mptcp #437 [ 46.640610] Hardware name: HP ProLiant DL165 G7, BIOS O37 01/26/2011 [ 46.716641] ffff8802363f8c84 ffff88023fdc3e38 ffffffff81487847 00000000a03cdb6d [ 46.805598] ffff8802363f8c00 ffff88023fdc3e68 ffffffff81068489 0000007f81825400 [ 46.894539] ffff8802363f8c00 0000000000000000 0000000000000000 ffff88023fdc3ea8 [ 46.983484] Call Trace: [ 47.012714] <IRQ> [<ffffffff81487847>] dump_stack+0x49/0x62 [ 47.081585] [<ffffffff81068489>] __report_bad_irq+0x35/0xc1 [ 47.149295] [<ffffffff81068683>] note_interrupt+0x16e/0x1ea [ 47.217006] [<ffffffff8106679e>] handle_irq_event_percpu+0x116/0x12e [ 47.294075] [<ffffffff810667e9>] handle_irq_event+0x33/0x4f [ 47.361787] [<ffffffff81068c95>] handle_fasteoi_irq+0x83/0xd1 [ 47.431577] [<ffffffff81003d5b>] handle_irq+0x1f/0x28 [ 47.493047] [<ffffffff81003567>] do_IRQ+0x4e/0xd4 [ 47.550358] [<ffffffff8148b06a>] common_interrupt+0x6a/0x6a [ 47.618066] <EOI> [<ffffffff8100992c>] ? default_idle+0x6/0x8 [ 47.689016] [<ffffffff81009b31>] arch_cpu_idle+0x13/0x18 [ 47.753605] [<ffffffff81066126>] cpu_startup_entry+0xa7/0x101 [ 47.823397] [<ffffffff81025660>] start_secondary+0x1b2/0x1b7 [ 47.892146] handlers: [ 47.919301] [<ffffffff812fbd7d>] igb_intr So, this patch unsets the flag to indicate that we are not using MSIX. This patch does exactly this: Unsetting the flag when falling back to MSI. Fixes: cd14ef54d25b (igb: Change to use statically allocated array for MSIx entries) Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21igb: Fix Null-pointer dereference in igb_reset_q_vectorChristoph Paasch
When igb_set_interrupt_capability() calls igb_reset_interrupt_capability() (e.g., because CONFIG_PCI_MSI is unset), num_q_vectors has been set but no vector has yet been allocated. igb_reset_interrupt_capability() will then call igb_reset_q_vector, which assumes that the vector is allocated. As this is not the case, we are accessing a NULL-pointer. This patch fixes it by checking that q_vector is indeed different from NULL. Fixes: 02ef6e1d0b0023 (igb: Fix queue allocation method to accommodate changing during runtime) Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21igb: specify phc_index of 82575 for get_ts_infoKen ICHIKAWA
82575 has only software timestamping capability and it has no PTP Hardware Clocks. Therefore, -1 has to be specified to the phc_index for ethtool's get_ts_info, otherwise a wrong value will be set to the phc_index. v2: move the if (adapter->ptp_clock) section specifying phc_index to above the switch statement as suggested by Matthew Vick. adapter->ptpclock will always be NULL for 82575. Signed-off-by: Ken ICHIKAWA <ichikawa.ken@jp.fujitsu.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21igb: Fix memory leak in igb_get_module_eeprom()Christian Engelmayer
Fix a memory leak in the igb_get_module_eeprom() error handling path. Detected by Coverity: CID 1016508. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21igb: add register rd/wr for surprise removalFujinaka, Todd
Add initial register rd/wr for surprise removal (LER). Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21igb: implement SIOCGHWTSTAMP ioctlJacob Keller
This patch adds support for the SIOCGHWTSTAMP ioctl which enables user processes to read the current hwtstamp_config settings non-destructively. Previously a process had to be privileged and could only set values, it couldn't return what is currently set without possibly overwriting the value. This patch adds support for this new operation into igb by keeping a shadow copy of the config in the adapter structure, which is returned upon request. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21ixgbevf: Additional adapter removal checksMark Rustad
Additional checks are needed for a detected removal not to cause problems. Some involve simply avoiding a lot of stuff that can't do anything good, and also cases where the phony return value can cause problems. In addition, down the adapter when the removal is sensed. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21ixgbevf: Check for adapter removal on register writesMark Rustad
Prevent writes to an adapter that has been detected as removed by a previous failing read. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21KVM: ioapic: extract body of kvm_ioapic_set_irqPaolo Bonzini
We will reuse it to process a nonzero IRR that is passed to KVM_SET_IRQCHIP. Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-21KVM: ioapic: clear IRR for edge-triggered interrupts at deliveryPaolo Bonzini
This ensures that IRR bits are set in the KVM_GET_IRQCHIP result only if the interrupt is still sitting in the IOAPIC. After the next patches, it avoids spurious reinjection of the interrupt when KVM_SET_IRQCHIP is called. Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-21ixgbevf: Check register reads for adapter removalMark Rustad
Check all register reads for adapter removal by checking the status register after any register read that returns 0xFFFFFFFF. Since the status register will never return 0xFFFFFFFF unless the adapter is removed, such a value from a status register read confirms the removal. Since this patch adds so much to ixgbe_read_reg, stop inlining it, to reduce driver bloat. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21KVM: ioapic: merge ioapic_deliver into ioapic_servicePaolo Bonzini
Commonize the handling of masking, which was absent for kvm_ioapic_set_irq. Setting remote_irr does not need a separate function either, and merging the two functions avoids confusion. Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-21ixgbevf: Make the ethtool register test use accessorsMark Rustad
Make the ethtool register test use the normal register accessor functions. Also eliminate macros used for calling register test functions to make error exits clearer. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21ixgbevf: Use static inlines instead of macrosMark Rustad
Kernel coding standard prefers static inline functions instead of macros, so use them for register accessors. This is to prepare for adding LER, Live Error Recovery, checks to those accessors. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21s390/mm: remove unecessary parameter from pgste_ipte_notifyDominik Dingel
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21s390/mm: remove unnecessary parameter from gmap_do_ipte_notifyDominik Dingel
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21s390/mm: fixing comment so that parameter name matchDominik Dingel
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21ixgbe: Break recursion in case of removalMark Rustad
When an adapter is removed and registers all read as all one's, an infinite recursion can happen between ixgbe_clear_vmdq_generic and ixgbe_clear_rar_generic. Adding a check for removal breaks this recursion. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21i40evf: clean up init error messagesMitch Williams
Add an error message when the admin queue message never completes, and fix formatting on another one that was unnecessarily wrapped. Change-ID: I8b8a4eb7629d741f09357250144023cd4a72231f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21i40evf: don't shut down admin queue on errorMitch Williams
If the driver encounters an error while communicating with the PF driver, don't just shut down the admin queue unconditionally. The PF may be delayed, and shutting down the admin queue causes it to fail completely. If this happens, the VF will never complete initialization. Change-ID: I6192e9d8caeefb738428c3597fa2f54fa400ce7f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21i40e: Fix a message stringAnjali Singhai Jain
Change string from "Side Band" to "Sideband" for consistency. Change-ID: I45f05466bb5c63b0f999d743312bcb61b5bd6518 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21i40e/i40evf: Add EEE LPI statsAnjali Singhai Jain
Add 4 new stats to keep track of EEE LPI (Low Power Idle) state. Change-ID: Id6316619bb0559789770288b694a54d17f8fac5c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-20Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Some final few intel fixes, all regressions, all stable cc, and one exynos oops fixer. The biggest is probably the intel display error irqs one, but it seems to fix a few crashes on startup, and one use after free in drm core" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/exynos: Fix (more) freeing issues in exynos_drm_drv.c drm/i915: Disable stolen memory when DMAR is active Revert "drm/i915: don't touch the VDD when disabling the panel" drm: Fix use-after-free in the shadow-attache exit code drm/i915: Don't enable display error interrupts from the start drm/i915: Fix scanline counter fixup on BDW drm/i915: Add a workaround for HSW scanline counter weirdness drm/i915: Fix PSR programming
2014-03-20block: free q->flush_rq in blk_init_allocated_queue error pathsDave Jones
Commit 7982e90c3a57 ("block: fix q->flush_rq NULL pointer crash on dm-mpath flush") moved an allocation to blk_init_allocated_queue(), but neglected to free that allocation on the error paths that follow. Signed-off-by: Dave Jones <davej@fedoraproject.org> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-20futex: revert back to the explicit waiter counting codeLinus Torvalds
Srikar Dronamraju reports that commit b0c29f79ecea ("futexes: Avoid taking the hb->lock if there's nothing to wake up") causes java threads getting stuck on futexes when runing specjbb on a power7 numa box. The cause appears to be that the powerpc spinlocks aren't using the same ticket lock model that we use on x86 (and other) architectures, which in turn result in the "spin_is_locked()" test in hb_waiters_pending() occasionally reporting an unlocked spinlock even when there are pending waiters. So this reinstates Davidlohr Bueso's original explicit waiter counting code, which I had convinced Davidlohr to drop in favor of figuring out the pending waiters by just using the existing state of the spinlock and the wait queue. Reported-and-tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Original-code-by: Davidlohr Bueso <davidlohr@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-20Merge tag 'trace-fixes-v3.14-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull trace fix from Steven Rostedt: "Vaibhav Nagarnaik discovered that since 3.10 a clean-up patch made the array index in the trace event format bogus. He supplied an elegant solution that uses __stringify() and also removes the need for the event_storage and event_storage_mutex and also cuts off a few K of overhead from the trace events" * tag 'trace-fixes-v3.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix array size mismatch in format string
2014-03-20mm: fix swapops.h:131 bug if remap_file_pages raced migrationHugh Dickins
Add remove_linear_migration_ptes_from_nonlinear(), to fix an interesting little include/linux/swapops.h:131 BUG_ON(!PageLocked) found by trinity: indicating that remove_migration_ptes() failed to find one of the migration entries that was temporarily inserted. The problem comes from remap_file_pages()'s switch from vma_interval_tree (good for inserting the migration entry) to i_mmap_nonlinear list (no good for locating it again); but can only be a problem if the remap_file_pages() range does not cover the whole of the vma (zap_pte() clears the range). remove_migration_ptes() needs a file_nonlinear method to go down the i_mmap_nonlinear list, applying linear location to look for migration entries in those vmas too, just in case there was this race. The file_nonlinear method does need rmap_walk_control.arg to do this; but it never needed vma passed in - vma comes from its own iteration. Reported-and-tested-by: Dave Jones <davej@redhat.com> Reported-and-tested-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-20Bluetooth: btmrvl: don't consume all vendor specific eventsAmitkumar Karwar
If vendor specific HCI commands are received from application, we should send corresponding events to stack. These events should be consumed in driver, only if they are for the internal HCI commands generated by driver. This patch fixes the vendor command 0x3f stuck problem with above mentioned change. For example, hcitool cmd 3f 22 fe 06 22 21 20 43 50 00 Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-20x86, vdso: Finish removing VDSO32_PRELINKAndy Lutomirski
It's a declaration of a nonexistent symbol. We can get rid of the 64-bit versions, too, but that's more intrusive. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Stefani Seibold <stefani@seibold.net> Link: http://lkml.kernel.org/r/2ce2ce18447d8a0b78d44a278a066b6c0af06b32.1395366931.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-03-20x86, vdso: Move more vdso definitions into vdso.hAndy Lutomirski
This fixes the Xen build and gets rid of a silly header file. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Stefani Seibold <stefani@seibold.net> Link: http://lkml.kernel.org/r/1df77311795aff75f5742c787d277518314a38d3.1395366931.git.luto@amacapital.net Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-03-21PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugsSaravana Kannan
The current devfreq_update_status() has the following bugs: - If previous frequency doesn't have a valid level, it does an out of bounds access into the trans_table and causes memory corruption. - When the new frequency doesn't have a valid level, the time spent in the new frequency is counted towards the next valid frequency switch instead of being ignored. - The time spent on the previous frequency is added to the new frequency's stats instead of the previous frequency's stats. This patch fixes all of this. Signed-off-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-03-20Btrfs: remove unnecessary inode generation lookup in sendFilipe Manana
No need to search in the send tree for the generation number of the inode, we already have it in the recorded_ref structure passed to us. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-03-20Btrfs: fix race when updating existing ref headFilipe Manana
While we update an existing ref head's extent_op, we're not holding its spinlock, so while we're updating its extent_op contents (key, flags) we can have a task running __btrfs_run_delayed_refs() that holds the ref head's lock and sets its extent_op to NULL right after the task updating the ref head just checked its extent_op was not NULL. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-03-20btrfs: Add trace for btrfs_workqueue alloc/destroyQu Wenruo
Since most of the btrfs_workqueue is printed as pointer address, for easier analysis, add trace for btrfs_workqueue alloc/destroy. So it is possible to determine the workqueue that a given work belongs to(by comparing the wq pointer address with alloc trace event). Signed-off-by: Qu Wenruo <quenruo@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-03-20Btrfs: less fs tree lock contention when using autodefragFilipe Manana
When finding new extents during an autodefrag, don't do so many fs tree lookups to find an extent with a size smaller then the target treshold. Instead, after each fs tree forward search immediately unlock upper levels and process the entire leaf while holding a read lock on the leaf, since our leaf processing is very fast. This reduces lock contention, allowing for higher concurrency when other tasks want to write/update items related to other inodes in the fs tree, as we're not holding read locks on upper tree levels while processing the leaf and we do less tree searches. Test: sysbench --test=fileio --file-num=512 --file-total-size=16G \ --file-test-mode=rndrw --num-threads=32 --file-block-size=32768 \ --file-rw-ratio=3 --file-io-mode=sync --max-time=1800 \ --max-requests=10000000000 [prepare|run] (fileystem mounted with -o autodefrag, averages of 5 runs) Before this change: 58.852Mb/sec throughtput, read 77.589Gb, written 25.863Gb After this change: 63.034Mb/sec throughtput, read 83.102Gb, written 27.701Gb Test machine: quad core intel i5-3570K, 32Gb of RAM, SSD. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-03-20Btrfs: return EPERM when deleting a default subvolumeGuangyu Sun
The error message is confusing: # btrfs sub delete /mnt/mysub/ Delete subvolume '/mnt/mysub' ERROR: cannot delete '/mnt/mysub' - Directory not empty The error message does not make sense to me: It's not about deleting a directory but it's a subvolume, and it doesn't matter if the subvolume is empty or not. Maybe EPERM or is more appropriate in this case, combined with an explanatory kernel log message. (e.g. "subvolume with ID 123 cannot be deleted because it is configured as default subvolume.") Reported-by: Koen De Wit <koen.de.wit@oracle.com> Signed-off-by: Guangyu Sun <guangyu.sun@oracle.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
2014-03-20Btrfs: add missing kfree in btrfs_destroy_workqueueFilipe Manana
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-03-20Btrfs: cache extent states in defrag code pathFilipe Manana
When locking file ranges in the inode's io_tree, cache the first extent state that belongs to the target range, so that when unlocking the range we don't need to search in the io_tree again, reducing cpu time and making and therefore holding the io_tree's lock for a shorter period. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-03-20Btrfs: fix deadlock with nested trans handlesJosef Bacik
Zach found this deadlock that would happen like this btrfs_end_transaction <- reduce trans->use_count to 0 btrfs_run_delayed_refs btrfs_cow_block find_free_extent btrfs_start_transaction <- increase trans->use_count to 1 allocate chunk btrfs_end_transaction <- decrease trans->use_count to 0 btrfs_run_delayed_refs lock tree block we are cowing above ^^ We need to only decrease trans->use_count if it is above 1, otherwise leave it alone. This will make nested trans be the only ones who decrease their added ref, and will let us get rid of the trans->use_count++ hack if we have to commit the transaction. Thanks, cc: stable@vger.kernel.org Reported-by: Zach Brown <zab@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Tested-by: Zach Brown <zab@redhat.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-03-20rcu: Provide grace-period piggybacking APIPaul E. McKenney
The following pattern is currently not well supported by RCU: 1. Make data element inaccessible to RCU readers. 2. Do work that probably lasts for more than one grace period. 3. Do something to make sure RCU readers in flight before #1 above have completed. Here are some things that could currently be done: a. Do a synchronize_rcu() unconditionally at either #1 or #3 above. This works, but imposes needless work and latency. b. Post an RCU callback at #1 above that does a wakeup, then wait for the wakeup at #3. This works well, but likely results in an extra unneeded grace period. Open-coding this is also a bit more semi-tricky code than would be good. This commit therefore adds get_state_synchronize_rcu() and cond_synchronize_rcu() APIs. Call get_state_synchronize_rcu() at #1 above and pass its return value to cond_synchronize_rcu() at #3 above. This results in a call to synchronize_rcu() if no grace period has elapsed between #1 and #3, but requires only a load, comparison, and memory barrier if a full grace period did elapse. Requested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org>
2014-03-21PNP: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch removes the use of the IRQF_DISABLED flag from drivers/pnp/resource.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-20x86, cpu: Add forcepae parameter for booting PAE kernels on PAE-disabled ↵Chris Bainbridge
Pentium M Many Pentium M systems disable PAE but may have a functionally usable PAE implementation. This adds the "forcepae" parameter which bypasses the boot check for PAE, and sets the CPU as being PAE capable. Using this parameter will taint the kernel with TAINT_CPU_OUT_OF_SPEC. Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Link: http://lkml.kernel.org/r/20140307114040.GA4997@localhost Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-03-20Rename TAINT_UNSAFE_SMP to TAINT_CPU_OUT_OF_SPECDave Jones
Rename TAINT_UNSAFE_SMP to TAINT_CPU_OUT_OF_SPEC, so we can repurpose the flag to encompass a wider range of pushing the CPU beyond its warrany. Signed-off-by: Dave Jones <davej@fedoraproject.org> Link: http://lkml.kernel.org/r/20140226154949.GA770@redhat.com Signed-off-by: H. Peter Anvin <hpa@zytor.com>
generated by cgit (git 2.34.1) at 2025-09-16 22:39:57 +0000