summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-03-17staging: comedi: comedi_fc: tidy up cfc_bytes_per_scan()H Hartley Sweeten
This function returns the total number of bytes for a full scan of an async command chanlist. The returned value is an unsigned int. Change all the local variables to unsigned int and use a local variable for the s->async->cmd.chanlist_len. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: comedi_fc: rename comedi_subdevice variables in headerH Hartley Sweeten
Typically the comedi_subdevice variable is simply named 's'. Rename the variables in comedi_fc.h. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: comedi_fc: remove 'extern' from function prototypesH Hartley Sweeten
The 'extern' is not needed in the prototypes for the exported functions in the header. Remove it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: comedi_fc: tidy up multi-line comment in headerH Hartley Sweeten
Tidy up the multi-line comment to follow the CodingStyle. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: comedi_fc: remove unnecessary prefix in dev_warn() messageH Hartley Sweeten
The dev_warn() will automatically have the "comedi" prefix. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: comedi_fc: rename comedi_subdevice variablesH Hartley Sweeten
Typically the comedi_subdevice variable is simply named 's'. Rename the variables in this file. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: comedi_fc: tidy up multi-line commentH Hartley Sweeten
Tidy up the multi-line comment to follow the CodingStyle. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: comedi_fc: tidy up module initH Hartley Sweeten
For aesthetics, move the MODULE_* information to the end of the file and move the module_{init,exit}() after the functions. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17Merge branch 'at86rf230'David S. Miller
Alexander Aring says: ==================== at86rf230: various fixes and devicetree support this patch series fix some bugs with the at86rf231 chip and cleaup some code. Also add devicetree support for the at86rf230 driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17percpu: allocation size should be evenViro
723ad1d90b56 ("percpu: store offsets instead of lengths in ->map[]") updated percpu area allocator to use the lowest bit, instead of sign, to signify whether the area is occupied and forced min align to 2; unfortunately, it forgot to force the allocation size to be even causing malfunctions for the very rare odd-sized allocations. Always force the allocations to be even sized. tj: Wrote patch description. Original-patch-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-17at86rf230: add support for devicetreeAlexander Aring
This patch adds devicetree support for the at86rf230 driver. Possible gpios to configure are "reset-gpio" and "sleep-gpio". Also add support to configure the "irq-type" for the irq polarity register. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17at86rf230: make reset pin optionallyAlexander Aring
This patch make the reset pin optionally. Some devices like the atben from qi-hardware don't have a reset pin externally. The usually way is to turn power off/on for the atben device to initiate a device reset. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17at86rf230: change reset timingsAlexander Aring
While checkpatch another patch I got a: "WARNING: msleep < 20ms can sleep for up to 20ms" The datasheet of at86rf231 and at86rf212 says a minimum delay for reset pulse width and spi access latency after reset is 625 nanoseconds. This patch removes the 1 milliseconds sleep and replace it with a 1 microseconds udelay which should be also okay for the reset pulse width. To change the state from RESET -> TRX_OFF the at86rf230 device needs 120 microseconds, this is a worst case of all at86rf* chips. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17at86rf230: move locking state in xmitAlexander Aring
There is no need to lock the clearing of IRQ_TRX_END in status. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17at86rf230: fix unexpected state changeAlexander Aring
This patch fix a unexpected state change for the at86rf231 chip. We can't change into STATE_FORCE_TX_ON while the chip is in one of SLEEP, P_ON, RESET, TRX_OFF, and all *_NOCLK states. In this case we are in the TRX_OFF state. See datasheet [1] page 71 for more information. Without this patch you will get the following message on a at86rf231 device: [ 20.065218] unexpected state change: 8, asked for 4 [ 20.070527] ------------[ cut here ]------------ [ 20.075414] WARNING: CPU: 0 PID: 160 at net/mac802154/ieee802154_dev.c:43 mac802154_slave_open+0x70/0xb8() [ 20.085594] Modules linked in: autofs4 [ 20.089667] CPU: 0 PID: 160 Comm: ifconfig Not tainted 3.14.0-20140108-1-00993-g905c192 #162 [ 20.098612] [<c00127b8>] (unwind_backtrace) from [<c0010b1c>] (show_stack+0x10/0x14) [ 20.106819] [<c0010b1c>] (show_stack) from [<c0033838>] (warn_slowpath_common+0x60/0x80) [ 20.115311] [<c0033838>] (warn_slowpath_common) from [<c00338e8>] (warn_slowpath_null+0x18/0x20) [ 20.124590] [<c00338e8>] (warn_slowpath_null) from [<c057b7e8>] (mac802154_slave_open+0x70/0xb8) [ 20.133880] [<c057b7e8>] (mac802154_slave_open) from [<c0488a58>] (__dev_open+0xa8/0x108) [ 20.142553] [<c0488a58>] (__dev_open) from [<c0488cb0>] (__dev_change_flags+0x8c/0x148) [ 20.151051] [<c0488cb0>] (__dev_change_flags) from [<c0488d84>] (dev_change_flags+0x18/0x48) [ 20.159968] [<c0488d84>] (dev_change_flags) from [<c04e2e9c>] (devinet_ioctl+0x2b0/0x63c) [ 20.168623] [<c04e2e9c>] (devinet_ioctl) from [<c04712e4>] (sock_ioctl+0x23c/0x29c) [ 20.176727] [<c04712e4>] (sock_ioctl) from [<c00e3cb8>] (do_vfs_ioctl+0x4a8/0x578) [ 20.184671] [<c00e3cb8>] (do_vfs_ioctl) from [<c00e3dd4>] (SyS_ioctl+0x4c/0x78) [ 20.192402] [<c00e3dd4>] (SyS_ioctl) from [<c000da00>] (ret_fast_syscall+0x0/0x48) [ 20.200392] ---[ end trace 9a34542f4ea08e47 ]--- This patch was tested on at86rf231 and at86rf212. [1] http://www.atmel.com/images/doc8111.pdf Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17Merge branch 'sh_eth'David S. Miller
Sergei Shtylyov says: ==================== Beautify 'sh_eth' driver's messages This patchset converts te driver to using netdev_*() and netif_*() to print out its messages whenever possible. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17sh_eth: fold netif_msg_*() and netdev_*() calls into netif_*() invocationsSergei Shtylyov
Now that we call netdev_*() under netif_msg_*() checks, we can fold these into netif_*() macro invocations. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17sh_eth: convert dev_*() to netdev_*() callsSergei Shtylyov
Convert dev_*(&ndev->dev, ...) to netdev_*(ndev, ...) calls since they are a bit shorter and at the same time give more information on a device. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17sh_eth: convert pr_*() to netdev_*() callsSergei Shtylyov
Convert pr_*() to netdev_*() calls as the latter provide info on a device. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17sh_eth: exit probe with unknown register layoutSergei Shtylyov
Exit the driver's probe() method when the register layout is unknown as the driver would cause kernel oops in this case anyway. While at it, move the corresponding error message printout and convert it from pr_err() to dev_err(). Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17sparc64:tsb.c:use array size macro rather than numberDoug Wilson
This is a small patch which uses ARRAY_SIZE macro rather than a number to make code readability better. Signed-off-by: Doug Wilson <doug.lkml@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17sparc64: don't treat 64-bit syscall return codes as 32-bitDave Kleikamp
When checking a system call return code for an error, linux_sparc_syscall was sign-extending the lower 32-bit value and comparing it to -ERESTART_RESTARTBLOCK. lseek can return valid return codes whose lower 32-bits alone would indicate a failure (such as 4G-1). Use the whole 64-bit value to check for errors. Only the 32-bit path should sign extend the lower 32-bit value. Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Acked-by: Bob Picco <bob.picco@oracle.com> Acked-by: Allen Pais <allen.pais@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entriesLoc Ho
This patch adds APM X-Gene SoC AHCI SATA host controller DTS entries. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Tuan Phan <tphan@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-17ata: Add APM X-Gene SoC AHCI SATA host controller driverLoc Ho
This patch adds support for the APM X-Gene SoC AHCI SATA host controller driver. It requires the corresponding APM X-Gene SoC PHY driver. This initial version only supports Gen3 speed. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Tuan Phan <tphan@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-17Documentation: Add documentation for the APM X-Gene SoC SATA host controller ↵Loc Ho
DTS binding This patch adds documentation for the APM X-Gene SoC SATA host controller DTS binding. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Tuan Phan <tphan@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-17arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entriesLoc Ho
This patch adds the DTS entries for the APM X-Gene SoC 15Gbps Multi-purpose PHY driver. The PHY for SATA controller 2 and 3 are enabled by default. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Tuan Phan <tphan@apm.com> Signed-off-by: Suman Tripathi <stripathi@apm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-17Merge branch 'netpoll-next'David S. Miller
Eric W. Biederman says: ==================== netpoll: Cleanup received packet processing This is the long-winded, careful, and polite version of removing the netpoll receive packet processing. First I untangle the code in small steps. Then I modify the code to not force reception and dropping of packets when we are transmiting a packet with netpoll. Finally I move all of the packet reception under CONFIG_NETPOLL_TRAP and delete CONFIG_NETPOLL_TRAP. If someone wants to do a stable backport of these patches, it would require backporting the first 18 patches that handle the budget == 0 in the networking drivers, and the first 6 of these patches. If anyone wants to resurrect netpoll packet reception someday it should just be a matter of reverting the last patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17netpoll: Remove dead packet receive code (CONFIG_NETPOLL_TRAP)Eric W. Biederman
The netpoll packet receive code only becomes active if the netpoll rx_skb_hook is implemented, and there is not a single implementation of the netpoll rx_skb_hook in the kernel. All of the out of tree implementations I have found all call netpoll_poll which was removed from the kernel in 2011, so this change should not add any additional breakage. There are problems with the netpoll packet receive code. __netpoll_rx does not call dev_kfree_skb_irq or dev_kfree_skb_any in hard irq context. netpoll_neigh_reply leaks every skb it receives. Reception of packets does not work successfully on stacked devices (aka bonding, team, bridge, and vlans). Given that the netpoll packet receive code is buggy, there are no out of tree users that will be merged soon, and the code has not been used for in tree for a decade let's just remove it. Reverting this commit can server as a starting point for anyone who wants to resurrect netpoll packet reception support. Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17netpoll: Move all receive processing under CONFIG_NETPOLL_TRAPEric W. Biederman
Make rx_skb_hook, and rx in struct netpoll depend on CONFIG_NETPOLL_TRAP Make rx_lock, rx_np, and neigh_tx in struct netpoll_info depend on CONFIG_NETPOLL_TRAP Make the functions netpoll_rx_on, netpoll_rx, and netpoll_receive_skb no-ops when CONFIG_NETPOLL_TRAP is not set. Only build netpoll_neigh_reply, checksum_udp service_neigh_queue, pkt_is_ns, and __netpoll_rx when CONFIG_NETPOLL_TRAP is defined. Add helper functions netpoll_trap_setup, netpoll_trap_setup_info, netpoll_trap_cleanup, and netpoll_trap_cleanup_info that initialize and cleanup the struct netpoll and struct netpoll_info receive specific fields when CONFIG_NETPOLL_TRAP is enabled and do nothing otherwise. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17netpoll: Consolidate neigh_tx processing in service_neigh_queueEric W. Biederman
Move the bond slave device neigh_tx handling into service_neigh_queue. In connection with neigh_tx processing remove unnecessary tests of a NULL netpoll_info. As the netpoll_poll_dev has already used and thus verified the existince of the netpoll_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17netpoll: Move netpoll_trap under CONFIG_NETPOLL_TRAPEric W. Biederman
Now that we no longer need to receive packets to safely drain the network drivers receive queue move netpoll_trap and netpoll_set_trap under CONFIG_NETPOLL_TRAP Making netpoll_trap and netpoll_set_trap noop inline functions when CONFIG_NETPOLL_TRAP is not set. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17netpoll: Don't drop all received packets.Eric W. Biederman
Change the strategy of netpoll from dropping all packets received during netpoll_poll_dev to calling napi poll with a budget of 0 (to avoid processing drivers rx queue), and to ignore packets received with netif_rx (those will safely be placed on the backlog queue). All of the netpoll supporting drivers have been reviewed to ensure either thay use netif_rx or that a budget of 0 is supported by their napi poll routine and that a budget of 0 will not process the drivers rx queues. Not dropping packets makes NETPOLL_RX_DROP unnecesary so it is removed. npinfo->rx_flags is removed as rx_flags with just the NETPOLL_RX_ENABLED flag becomes just a redundant mirror of list_empty(&npinfo->rx_np). Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17netpoll: Add netpoll_rx_processingEric W. Biederman
Add a helper netpoll_rx_processing that reports when netpoll has receive side processing to perform. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17netpoll: Warn if more packets are processed than are budgetedEric W. Biederman
There is already a warning for this case in the normal netpoll path, but put a copy here in case how netpoll calls the poll functions causes a differenet result. netpoll will shortly call the napi poll routine with a budget 0 to avoid any rx packets being processed. As nothing does that today we may encounter drivers that have problems so a netpoll specific warning seems desirable. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17netpoll: Visit all napi handlers in poll_napiEric W. Biederman
In poll_napi loop through all of the napi handlers even when the budget falls to 0 to ensure that we process all of the tx_queues, and so that we continue to call into drivers when our initial budget is 0. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17netpoll: Pass budget into poll_napiEric W. Biederman
This moves the control logic to the top level in netpoll_poll_dev instead of having it dispersed throughout netpoll_poll_dev, poll_napi and poll_one_napi. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17netpoll: move setting of NETPOLL_RX_DROP into netpoll_poll_devEric W. Biederman
Today netpoll depends on setting NETPOLL_RX_DROP before networking drivers receive packets in interrupt context so that the packets can be dropped. Move this setting into netpoll_poll_dev from poll_one_napi so that if ndo_poll_controller happens to receive packets we will drop the packets on the floor instead of letting the packets bounce through the networking stack and potentially cause problems. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17staging: comedi: jr3_pci: remove 'channel_no' from subdevice private dataH Hartley Sweeten
This member of the subdevice private data is just the subdevice 'index'. Use that instead and remove the member. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: jr3_pci: rename struct poll_delay_tH Hartley Sweeten
Rename this private struct so it has namespace associated with the driver. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: jr3_pci: rename struct transform_tH Hartley Sweeten
Rename this private struct so it has namespace associated with the driver. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: jr3_pci: remove 'n_channels' from private dataH Hartley Sweeten
This member of the private data is actually the number of subdevices. We can get that information directly from the comedi_device. Do that instead and remove the unnecessary member from the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: jr3_pci: introduce boardinfo for the supported boardsH Hartley Sweeten
Create an enum for the boards supported by this driver and pass that enum in the pci_driver id_table as the driver_data. Introduce a boardinfo struct to hold the board specific data for the boards supported by this driver. Use the boardinfo when attaching to the driver instead of using the pcidev->device and the switch. Since the PCI device ids are now only used in the id_table, remove the defines and open code the device ids. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: jr3_pci: tidy up jr3_pci_ai_insn_read()H Hartley Sweeten
Refactor this function to make it clearer. The channel does not need to be validated. The comedi core does that for us. Exit early if the subdevice private data is invalid. Exit early if the subdevice 'state' is not done or there is an error. Factor out the code that actually reads the channel data to reduce the indent level. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: jr3_pci: tidy up jr3_pci_open()H Hartley Sweeten
For aesthetics, rename the subdevice private data pointer from 'p' to 'spriv' and add a local variable for the comedi_subdevice pointer. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: jr3_pci: tidy up jr3_download_firmware()H Hartley Sweeten
This callback function for comedi_load_firmware() first validates that the firmware data is the correct format then it writes the data to each subdevice. Split the two operations out as separate functions to clarify the code. Tidy up the new functions. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: jr3_pci: tidy up jr3_pci_poll_subdevice()H Hartley Sweeten
Refactor the function to reduce the indent level. For aesthetics, rename the subdevice private data pointer from 'p' to 'spriv'. Rename the lacal variable used for the channel->full_scale to 'fs' to reduce the line lengths. Remove the setting of range[8]. The min,max values are the same as the ones used when the subdevice private data was allocated and initialized. Remove the poll_delay_min_max() that are the same as the default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: jr3_pci: tidy up jr3_pci_poll_dev()H Hartley Sweeten
For aesthetics, rename the subdevice private data pointer from 'subdevpriv' to 'spriv' and add a local variable for the comedi_subdevice pointer. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: jr3_pci: rename some local vars in the (*attach)H Hartley Sweeten
For aesthetics, rename the subdevice private data pointer from 'p' to 'spriv' and the variable used to check the errno from 'result' to 'ret'. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: jr3_pci: factor subdevice private data init out of (*attach)H Hartley Sweeten
Factor the code that allocates and initializes the subdevice private data out of the (*attach) to reduce the indent level and make the code easier to follow. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging: comedi: jr3_pci: use comedi_alloc_spriv()H Hartley Sweeten
Use the helper function to allocate the subdevice private data. This sets the s->private variable for us and allows the comedi core to automatically kfree() the memory during the (*detach). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-22 16:40:45 +0000