| Age | Commit message (Collapse) | Author |
|---|
|
This field duplicate the LO_FLAGS_DIRECT_IO flag in lo_flags. Remove it
to have a single source of truth about using direct I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All callers of loop_update_dio except for loop_configure already have the
queue frozen, and loop_configure works on an unbound device. Remove the
superfluous recursive freezing in loop_update_dio and add asserts for the
locking and freezing state instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unlike all other calls of (__)loop_update_dio, loop_set_status never
looks at the O_DIRECT flag of the backing file, and thus doesn't
re-enable direct I/O on an O_DIRECT backing file if e.g. the new block
size would allow it. Fix that and remove the need for the separate
__loop_update_dio flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
loop_set_dio is different from the other (__)loop_update_dio callers in
that it doesn't take any implicit conditions into account and wants to
update the direct I/O flag to the user passed in value and fail if that
can't be done.
Open code the logic here to prepare for simplifying the other direct I/O
flag updates and to make the error handling less convoluted.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no point in doing an fdatasync to write out pages when switching
away from direct I/O, as there won't be any. The writeback is only
needed when switching to direct I/O, which would have to invalidate the
pagecache less efficiently from the I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor out a part of __loop_update_dio in preparation for further
refactoring.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The concept of transfers is gone since commit 47e9624616c8 ("block:
remove support for cryptoloop and the xor transfer").
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While loop_configure simplify assigns the flags passed in by userspace,
loop_set_status only looks at the two changeable flags, and currently
has to do a complicate dance to implement that.
Move assign lo->lo_flags out of loop_set_status_from_info into the
callers and thus drastically simplify the lo_flags handling in
loop_set_status.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250110073750.1582447-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A collection of device specific fixes that came in over the holidays,
plus a MAINTAINERS update and some documentation to help users debug
problems with some of the Cirrus CODECs found in modern laptops.
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper and document the callers that
do not freeze the queue at all.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace loop_reconfigure_limits with a slightly less encompassing
loop_update_limits that expects the caller to acquire and commit the
queue limits to prepare for sorting out the freeze vs limits lock
ordering.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock using the
queue_limits_commit_update_frozen helper.
This also allows removes the need for the separate __nbd_set_size helper,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Match the locking order used by the core block code by only freezing
the queue after taking the limits lock.
Unlike most queue updates this does not use the
queue_limits_commit_update_frozen helper as the nvme driver want the
queue frozen for more than just the limits update.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_attr_store() always freezes a device queue before calling the
attribute store operation. For attributes that control queue limits, the
store operation will also lock the queue limits with a call to
queue_limits_start_update(). However, some drivers (e.g. SCSI sd) may
need to issue commands to a device to obtain limit values from the
hardware with the queue limits locked. This creates a potential ABBA
deadlock situation if a user attempts to modify a limit (thus freezing
the device queue) while the device driver starts a revalidation of the
device queue limits.
Avoid such deadlock by not freezing the queue before calling the
->store_limit() method in struct queue_sysfs_entry and instead use the
queue_limits_commit_update_frozen helper to freeze the queue after taking
the limits lock.
This also removes taking the sysfs lock for the store_limit method as
it doesn't protect anything here, but creates even more nesting.
Hopefully it will go away from the actual sysfs methods entirely soon.
(commit log adapted from a similar patch from Damien Le Moal)
Fixes: ff956a3be95b ("block: use queue_limits_commit_update in queue_discard_max_store")
Fixes: 0327ca9d53bf ("block: use queue_limits_commit_update in queue_max_sectors_store")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
De-duplicate the code for updating queue limits by adding a store_limit
method that allows having common code handle the actual queue limits
update.
Note that this is a pure refactoring patch and does not address the
existing freeze vs limits lock order problem in the refactored code,
which will be addressed next.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When __blk_mq_update_nr_hw_queues changes the number of tag sets, it
might have to disable poll queues. Currently it does so by adjusting
the BLK_FEAT_POLL, which is a bit against the intent of features that
describe hardware / driver capabilities, but more importantly causes
nasty lock order problems with the broadly held freeze when updating the
number of hardware queues and the limits lock. Fix this by leaving
BLK_FEAT_POLL alone, and instead check for the number of poll queues in
the bio submission and poll handlers. While this adds extra work to the
fast path, the variables are in cache lines used by these operations
anyway, so it should be cheap enough.
Fixes: 8023e144f9d6 ("block: move the poll flag to queue_limits")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Otherwise feature reconfiguration can race with I/O submission.
Also drop the bio_clear_polled in the error path, as the flag does not
matter for instant error completions, it is a left over from when we
allowed polled I/O to proceed unpolled in this case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper that freezes the queue, updates the queue limits and
unfreezes the queue and convert all open coded versions of that to the
new helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_limits_commit_update is the function that needs to operate on a
frozen queue, not queue_limits_start_update. Update the kerneldoc
comments to reflect that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Needed to build tools/lib/bpf/ on various arches other than x86_64,
notably arm64 when using the perf tarballs generated by:
$ make help | grep perf-
perf-tar-src-pkg - Build the perf source tarball with no compression
perf-targz-src-pkg - Build the perf source tarball with gzip compression
perf-tarbz2-src-pkg - Build the perf source tarball with bz2 compression
perf-tarxz-src-pkg - Build the perf source tarball with xz compression
perf-tarzst-src-pkg - Build the perf source tarball with zst compression
$
Building with BPF support was opt-in in perf for a long time, and
testing it via the tarball main kernel Makefile targets in an
architecture other than x86_64 was an odd case.
I had noticed this at some point earlier this year while cross building
perf to some arches, including arm64, but it fell thru the cracks, see
the Link tag below.
Fix it now by adding those arch/*/include/uapi/asm/bpf_perf_event.h
files to the MANIFEST file used in building the perf source tarball.
Tested with:
perfbuilder@number:~$ time dm debian:experimental-x-arm64
1 21.60 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 14.1.0-5) 14.1.0 flex 2.6.4
BUILD_TARBALL_HEAD=d31a974f6edc576f84c35be9526fec549a3b3520
$
$ git log --oneline -1 d31a974f6edc576f84c35be9526fec549a3b3520
d31a974f6edc576f (HEAD -> perf-tools-next) perf MANIFEST: Add arch/*/include/uapi/asm/bpf_perf_event.h to the perf tarball
$
That was previously failing:
perfbuilder@number:~$ grep debian:experimental-x-arm64 dm.log.old/summary
19 4.80 debian:experimental-x-arm64 : FAIL gcc version 14.1.0 (Debian 14.1.0-5)
$
perfbuilder@number:~$ grep -B6 'Error 1' dm.log.old/debian:experimental-x-arm64
In file included from /git/perf-6.12.0-rc6/tools/include/uapi/linux/bpf_perf_event.h:11,
from libbpf.c:36:
/git/perf-6.12.0-rc6/tools/include/uapi/asm/bpf_perf_event.h:2:10: fatal error: ../../arch/arm64/include/uapi/asm/bpf_perf_event.h: No such file or directory
2 | #include "../../arch/arm64/include/uapi/asm/bpf_perf_event.h"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[4]: *** [/git/perf-6.12.0-rc6/tools/build/Makefile.build:105: /tmp/build/perf/libbpf/staticobjs/libbpf.o] Error 1
perfbuilder@number:~$
Closes: https://lore.kernel.org/all/Z0UNRCRYKunbDYxP@hyperscale.parallels
Fixes: 9eea8fafe33eb708 ("libbpf: fix __arg_ctx type enforcement for perf_event programs")
Reported-by: Michel Lind <michel@michel-slm.name>
Tested-by: Michel Lind <michel@michel-slm.name>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: 317c11923cf676437456e44a7f408d4ce589a9c0.camel@michel-slm.name
Link: https://lore.kernel.org/bpf/ZfyEgoG3JFiOs2Fs@x1/
Link: https://lore.kernel.org/r/Z0Yy5u42Q1hWoEzz@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add PMU events for FUJITSU-MONAKA.
And, also updated common-and-microarch.json and recommended.json.
FUJITSU-MONAKA Specification URL:
https://github.com/fujitsu/FUJITSU-MONAKA
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Akio Kakuno <fj3333bs@aa.jp.fujitsu.com>
Signed-off-by: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Xu Yang <xu.yang_2@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20241217065751.1448755-1-fj5100bi@fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In machine__create_module(), it reads /proc/modules to get a list of
modules in the system. The file shows the start address (of text) and
the size of the module so it uses the info to reconstruct system memory
maps for symbol resolution.
But module memory consists of multiple segments and they can be
scaterred. Currently perf tools assume they are contiguous and see some
overlaps. This can confuse the tool when it finds a map containing a
given address.
As we mostly care about the function symbols in the text segment, it can
fixup the size or end address of modules when there's an overlap. We
can use maps__fixup_end() which updates the end address using the start
address of the next map.
Ideally it should be able to track other segments (like data/rodata),
but that would require some changes in /proc/modules IMHO.
Reported-by: Blake Jones <blakejones@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20241218220453.203069-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When there are more than one symbols at the same address, it needs to
choose which one is better. In choose_best_symbol() it didn't check the
type of symbols. It's possible to have labels in other symbols and in
that case, it would be better to pick the actual symbol over the labels.
To minimize the possible impact on other symbols, I only check NOTYPE
symbols specifically.
$ readelf -sW vmlinux | grep -e __do_softirq -e __softirqentry_text_start
105089: ffffffff82000000 814 FUNC GLOBAL DEFAULT 1 __do_softirq
111954: ffffffff82000000 0 NOTYPE GLOBAL DEFAULT 1 __softirqentry_text_start
The commit 77b004f4c5c3c90b tried to do the same by not giving the size
to the label symbols but it seems there's some label-only symbols in asm
code. Let's restore the original code and choose the right symbol using
type of the symbols.
Fixes: 77b004f4c5c3c90b ("perf symbol: Do not fixup end address of labels")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: http://lore.kernel.org/lkml/Z3b-DqBMnNb4ucEm@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
cxx_demangle_sym is weak in case demangle-cxx.c replaces the
definition in symbol-elf.c. When demangle-cxx.c is built
HAVE_CXA_DEMANGLE_SUPPORT is defined, as such the define can be used
to avoid a weak symbol.
As weak symbols are outside of the C standard their use can lead to
strange behaviors, in particular with LTO, as well as causing issues to
be hidden at link time.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119031754.1021858-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some version of compilers reported unaligned accesses in perf trace when
undefined-behavior sanitizer is on. I found that it uses raw data in
the sample directly and assuming it's properly aligned.
Unlike other sample fields, the raw data is not 8-byte aligned because
there's a size field (u32) before the actual data. So I added a static
buffer in syscall__augmented_args() and return it instead. This is not
ideal but should work well as perf trace is single-threaded.
A better approach would be aligning the raw data by adding a 4-byte data
before the augmented args but I'm afraid it'd break the backward
compatibility.
Committer testing:
To build with the undefined behaviour sanitizer:
$ make CC=clang EXTRA_CFLAGS=-fsanitize=undefined -C tools/perf
Checking if the resulting binary is instrumented:
root@number:~# nm ~/bin/perf | grep ubsan | wc -l
113
root@number:~# nm ~/bin/perf | grep ubsan | tail -5
000000000043d5b0 t _ZN7__ubsanL19UBsanOnDeadlySignalEiPvS0_
000000000043ce50 T _ZNK7__ubsan5Value12getSIntValueEv
000000000043cf40 T _ZNK7__ubsan5Value12getUIntValueEv
000000000043d140 T _ZNK7__ubsan5Value13getFloatValueEv
000000000043cfd0 T _ZNK7__ubsan5Value19getPositiveIntValueEv
root@number:~#
Now running something that will access timespec, as reported in the
Closes URL:
root@number:~# perf trace --max-events=1 -e *nano* sleep 1.1
trace/beauty/timespec.c:10:64: runtime error: member access within misaligned address 0x7fc583cfb2a4 for type 'struct augmented_arg', which requires 8 byte alignment
0x7fc583cfb2a4: note: pointer points here
99 99 11 00 10 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 01 e1 f5 05 00 00 00 00 00 00 00 00
^
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior trace/beauty/timespec.c:10:64
<SNIP>
As Namhyung said we need to make the raw_data to be 64-bit aligned,
probably we need to add a PERF_SAMPLE_ALIGNED_RAW with a 64-bit raw_size
instead of the current u32 done at kernel/events/core.c,
perf_output_sample(), that perf_output_put(handle, raw->size) where
raw->size is an u32 and then the raw_data is always 64-bit unaligned...
After the patch:
root@number:~# perf trace -e *nano* sleep 1.1
0.000 (1100.064 ms): sleep/1984224 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 100000001 }, rmtp: 0x7fff5b3fe970) = 0
root@number:~#
Closes: https://lore.kernel.org/r/Z2STgyD1p456Qqhg@google.com
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250102201248.790841-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Probes are global and other probe tests are already exclusive. These
two tests can throw warnings when run at the same time so mark them as
exclusive too:
$ perf test -vvv 81 79
79: perftool-testsuite_probe:
--- start ---
test child forked, pid 46419
../common/init.sh: line 137: /sys/kernel/debug/tracing/uprobe_events: Device or resource busy
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20250107165933.292225-1-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
All architectures now support HAVE_SYSCALL_TABLE_SUPPORT, so the flag is
no longer needed. With the removal of the flag, the related
GENERIC_SYSCALL_TABLE can also be removed.
libaudit was only used as a fallback for when HAVE_SYSCALL_TABLE_SUPPORT
was not defined, so libaudit is also no longer needed for any
architecture.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-16-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the generic scripts to generate headers from the syscall table
instead of the custom ones for s390.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-15-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.13-rc7
Here are some new modem and cp210x device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.13-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Neoway N723-EA support
USB: serial: option: add MeiG Smart SRM815
USB: serial: cp210x: add Phoenix Contact UPS Device
|
|
Use the generic scripts to generate headers from the syscall table
instead of the custom ones for powerpc.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-14-7543b5293098@rivosinc.com
Link: https://lore.kernel.org/lkml/20250110100505.78d81450@canb.auug.org.au
[ Stephen Rothwell noticed on linux-next that the powerpc build for perf was broken and ...]
Link: https://lore.kernel.org/lkml/20250109-perf_powerpc_spu-v1-1-c097fc43737e@rivosinc.com
[ ... Charlie fixed it up and asked for it to be squashed to avoid breaking bisection. ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
David Howells <dhowells@redhat.com> says:
Here are some patches to make a number of improvements to the AFS dynamic
root:
(1) Create an /afs/.<cell> mountpoint to match the /afs/<cell> mountpoint
when a cell is created.
(2) Add some more checks on cell names proposed by the user to prevent
dodgy symlink bodies from being created. Also prevent rootcell from
being altered once set to simplify the locking.
(3) Change the handling of /afs/@cell from being a dentry name
substitution at lookup time to making it a symlink to the current cell
name and also provide a /afs/.@cell symlink to point to the dotted
cell mountpoint.
* patches from https://lore.kernel.org/r/20250107183454.608451-1-dhowells@redhat.com:
afs: Make /afs/@cell and /afs/.@cell symlinks
afs: Add rootcell checks
afs: Make /afs/.<cell> as well as /afs/<cell> mountpoints
Link: https://lore.kernel.org/r/20250107183454.608451-1-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Make /afs/@cell a symlink in the /afs dynamic root to match what other AFS
clients do rather than doing a substitution in the dentry name. This has
the bonus of being tab-expandable also.
Further, provide a /afs/.@cell symlink to point to the dotted cell share.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20250107183454.608451-4-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add some checks for the validity of the cell name. It's may get put into a
symlink, so preclude it containing any slashes or "..". Also disallow
starting/ending with a dot. This makes /afs/@cell/ as a symlink less of a
security risk.
Also disallow multiple setting of /proc/net/afs/rootcell for any given
network namespace. Once set, the value may not be changed. This makes it
easier to only create /afs/@cell and /afs/.@cell if there's a rootcell.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20250107183454.608451-3-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When a cell is instantiated, automatically create an /afs/.<cell>
mountpoint to match the /afs/<cell> mountpoint to match other AFS clients.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20250107183454.608451-2-dhowells@redhat.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
drivers/perf/ contains drivers for the perf subsystem, so it makes sense
that the perf list, linux-perf-users@vger.kernel.org, should be
included for perf drivers.
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: James Clark <james.clark@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250109152811.3402943-1-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The header asm/unistd_compat_32.h is included whether CONFIG_COMPAT is
defined or not.
Include it only once and remove the following make includecheck warning:
asm/unistd_compat_32.h is included more than once
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250109104636.124507-2-thorsten.blum@linux.dev
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Map the generic perf events for branch prediction stats to the
corresponding hardware events.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20241217212048.3709204-4-oliver.upton@linux.dev
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit f2c77f6e41e6 ("iommu/arm-smmu-v3: Use str_read_write helper w/
logs") introduced a call to str_read_write() in the SMMUv3 driver but
without an explicit #include of <linux/string_choices.h>. This breaks
the build for custom configurations where CONFIG_ACPI=n:
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c:1909:4: error: call to
undeclared function 'str_read_write'; ISO C99 and later do not
support implicit function declarations [-Wimplicit-function-declaration]
1909 | str_read_write(evt->read),
| ^
Add the missing #include.
Link: https://lore.kernel.org/r/d07e82a4-2880-4ae3-961b-471bfa7ac6c4@samsung.com
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: f2c77f6e41e6 ("iommu/arm-smmu-v3: Use str_read_write helper w/ logs")
Signed-off-by: Will Deacon <will@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate changes for 6.14 from Mario Limonciello:
"Fix a regression with preferred core rankings not being used.
Fix a precision issue with frequency calculation."
* tag 'amd-pstate-v6.14-2025-01-07' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Refactor max frequency calculation
cpufreq/amd-pstate: Fix prefcore rankings
|
|
Running 'scripts/kernel-doc -Wall -Werror -none' flagged the following
kernel-doc issues:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:823: warning: No description found for return value of 'brcmf_apsta_add_vif'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:907: warning: No description found for return value of 'brcmf_mon_add_vif'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7419: warning: No description found for return value of 'brcmf_setup_ifmodes'
Add the missing 'Return:' tags to the kernel-doc of these functions.
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250106-brcmfmac-kdoc-v1-1-ed72196e21a1@oss.qualcomm.com
|
|
THe last use of il_get_single_channel_number() was removed in 2011 by
commit dd6d2a8aef69 ("iwlegacy: remove reset rf infrastructure")
when it was still called iwl_legacy_get_single_channel_number.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241226011355.135417-3-linux@treblig.org
|
|
The last use of il3945_calc_db_from_ratio() was removed in 2010 by
commit ed1b6e99b5e6 ("iwlwifi: remove noise reporting")
when it was still called iwl3945_calc_db_from_ratio().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241226011355.135417-2-linux@treblig.org
|
|
The intention here is not clear but as this was already tested and matches
vendor driver it's better not to change behavior even if it looks suspicious.
So just remove the unused values.
Coverity-ID: 1525307
Signed-off-by: Ariel Otilibili <ariel.otilibili-anieli@eurecom.fr>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
[kvalo@kernel.org: write commit message]
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241221124445.1094460-2-ariel.otilibili-anieli@eurecom.fr
|
|
Instead of having a series of function pointers that gets assigned to the
Elf64 or Elf32 versions, put them all into a single structure and use
that. Add the helper function that chooses the structure into the macros
that build the different versions of the elf functions.
Link: https://lore.kernel.org/all/CAHk-=wiafEyX7UgOeZgvd6fvuByE5WXUPh9599kwOc_d-pdeug@mail.gmail.com/
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/20250110075459.13d4b94c@gandalf.local.home
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Somewhen between 6.10 and 6.11 the driver started to crash on my
MacBookPro14,3. The property doesn't exist and 'tmp' remains
uninitialized, so we pass a random pointer to devm_kstrdup().
The crash I am getting looks like this:
BUG: unable to handle page fault for address: 00007f033c669379
PF: supervisor read access in kernel mode
PF: error_code(0x0001) - permissions violation
PGD 8000000101341067 P4D 8000000101341067 PUD 101340067 PMD 1013bb067 PTE 800000010aee9025
Oops: Oops: 0001 [#1] SMP PTI
CPU: 4 UID: 0 PID: 827 Comm: (udev-worker) Not tainted 6.11.8-gentoo #1
Hardware name: Apple Inc. MacBookPro14,3/Mac-551B86E5744E2388, BIOS 529.140.2.0.0 06/23/2024
RIP: 0010:strlen+0x4/0x30
Code: f7 75 ec 31 c0 c3 cc cc cc cc 48 89 f8 c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 14 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 cc
RSP: 0018:ffffb4aac0683ad8 EFLAGS: 00010202
RAX: 00000000ffffffea RBX: 00007f033c669379 RCX: 0000000000000001
RDX: 0000000000000cc0 RSI: 00007f033c669379 RDI: 00007f033c669379
RBP: 00000000ffffffea R08: 0000000000000000 R09: 00000000c0ba916a
R10: ffffffffffffffff R11: ffffffffb61ea260 R12: ffff91f7815b50c8
R13: 0000000000000cc0 R14: ffff91fafefffe30 R15: ffffb4aac0683b30
FS: 00007f033ccbe8c0(0000) GS:ffff91faeed00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f033c669379 CR3: 0000000107b1e004 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x149/0x4c0
? raw_spin_rq_lock_nested+0xe/0x20
? sched_balance_newidle+0x22b/0x3c0
? update_load_avg+0x78/0x770
? exc_page_fault+0x6f/0x150
? asm_exc_page_fault+0x26/0x30
? __pfx_pci_conf1_write+0x10/0x10
? strlen+0x4/0x30
devm_kstrdup+0x25/0x70
brcmf_of_probe+0x273/0x350 [brcmfmac]
Signed-off-by: Stefan Dösinger <stefan@codeweavers.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250106170958.3595-1-stefan@codeweavers.com
|
|
If firmware boot failes, runtime pm is put too often:
[12092.708099] wlcore: ERROR firmware boot failed despite 3 retries
[12092.708099] wl18xx_driver wl18xx.1.auto: Runtime PM usage count underflow!
Fix that by redirecting all error gotos before runtime_get so that runtime is
not put.
Fixes: c40aad28a3cf ("wlcore: Make sure firmware is initialized in wl1271_op_add_interface()")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Michael Nemanov <michael.nemanov@ti.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250104195507.402673-1-akemnade@kernel.org
|
|
There is a specific error path in probe functions in wilc drivers (both
sdio and spi) which can lead to kernel panic, as this one for example
when using SPI:
Unable to handle kernel paging request at virtual address 9f000000 when read
[9f000000] *pgd=00000000
Internal error: Oops: 5 [#1] ARM
Modules linked in: wilc1000_spi(+) crc_itu_t crc7 wilc1000 cfg80211 bluetooth ecdh_generic ecc
CPU: 0 UID: 0 PID: 106 Comm: modprobe Not tainted 6.13.0-rc3+ #22
Hardware name: Atmel SAMA5
PC is at wiphy_unregister+0x244/0xc40 [cfg80211]
LR is at wiphy_unregister+0x1c0/0xc40 [cfg80211]
[...]
wiphy_unregister [cfg80211] from wilc_netdev_cleanup+0x380/0x494 [wilc1000]
wilc_netdev_cleanup [wilc1000] from wilc_bus_probe+0x360/0x834 [wilc1000_spi]
wilc_bus_probe [wilc1000_spi] from spi_probe+0x15c/0x1d4
spi_probe from really_probe+0x270/0xb2c
really_probe from __driver_probe_device+0x1dc/0x4e8
__driver_probe_device from driver_probe_device+0x5c/0x140
driver_probe_device from __driver_attach+0x220/0x540
__driver_attach from bus_for_each_dev+0x13c/0x1a8
bus_for_each_dev from bus_add_driver+0x2a0/0x6a4
bus_add_driver from driver_register+0x27c/0x51c
driver_register from do_one_initcall+0xf8/0x564
do_one_initcall from do_init_module+0x2e4/0x82c
do_init_module from load_module+0x59a0/0x70c4
load_module from init_module_from_file+0x100/0x148
init_module_from_file from sys_finit_module+0x2fc/0x924
sys_finit_module from ret_fast_syscall+0x0/0x1c
The issue can easily be reproduced, for example by not wiring correctly
a wilc device through SPI (and so, make it unresponsive to early SPI
commands). It is due to a recent change decoupling wiphy allocation from
wiphy registration, however wilc_netdev_cleanup has not been updated
accordingly, letting it possibly call wiphy unregister on a wiphy which
has never been registered.
Fix this crash by moving wiphy_unregister/wiphy_free out of
wilc_netdev_cleanup, and by adjusting error paths in both drivers
Fixes: fbdf0c5248dc ("wifi: wilc1000: Register wiphy after reading out chipid")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241223-wilc_fix_probe_error_path-v1-1-91fa7bd8e5b6@bootlin.com
|
|
Setting beacon_int_min_gcd and NL80211_IFTYPE_ADHOC in the same interface
combination is invalid, which will trigger the following warning trace
and get error returned from wiphy_register().
[ 10.080325] Call trace:
[ 10.082761] wiphy_register+0xc4/0x76c [cfg80211]
[ 10.087465] ieee80211_register_hw+0x800/0xac4 [mac80211]
[ 10.092868] mt76_register_device+0x16c/0x2c0 [mt76]
[ 10.097829] mt7996_register_device+0x740/0x844 [mt7996e]
Fix this by removing unused adhoc iftype.
Fixes: 948f65249868 ("wifi: mt76: mt7996: advertize beacon_int_min_gcd")
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Tested-By: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241007135133.5336-1-shayne.chen@mediatek.com
|
|
malloc() may return NULL, leading to NULL dereference. Add a NULL
check.
Fixes: ba84b0bf5a16 ("samples/landlock: Add a sandbox manager example")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Link: https://lore.kernel.org/r/20241128032955.11711-1-zichenxie0106@gmail.com
[mic: Simplify fix]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
