| Age | Commit message (Collapse) | Author |
|---|
|
The bnxt_queue_{start | stop}() access vnic_info as much as allocated,
which indicates bp->nr_vnics.
So, it should not reach bp->vnic_info[bp->nr_vnics].
Fixes: 661958552eda ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250316025837.939527-1-ap420073@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Roopa has decided to withdraw as a bridge maintainer and Ido has agreed to
step up and co-maintain the bridge with me. He has been very helpful in
bridge patch reviews and has contributed a lot to the bridge over the
years. Add an entry for Roopa to CREDITS and also add bridge's headers
to its MAINTAINERS entry.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314100631.40999-1-razor@blackwall.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, bluetooth and ipsec.
This contains a last minute revert of a recent GRE patch, mostly to
allow me stating there are no known regressions outstanding.
Current release - regressions:
- revert "gre: Fix IPv6 link-local address generation."
- eth: ti: am65-cpsw: fix NAPI registration sequence
Previous releases - regressions:
- ipv6: fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw().
- mptcp: fix data stream corruption in the address announcement
- bluetooth: fix connection regression between LE and non-LE adapters
- can:
- flexcan: only change CAN state when link up in system PM
- ucan: fix out of bound read in strscpy() source
Previous releases - always broken:
- lwtunnel: fix reentry loops
- ipv6: fix TCP GSO segmentation with NAT
- xfrm: force software GSO only in tunnel mode
- eth: ti: icssg-prueth: add lock to stats
Misc:
- add Andrea Mayer as a maintainer of SRv6"
* tag 'net-6.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
MAINTAINERS: Add Andrea Mayer as a maintainer of SRv6
Revert "gre: Fix IPv6 link-local address generation."
Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."
net/neighbor: add missing policy for NDTPA_QUEUE_LENBYTES
tools headers: Sync uapi/asm-generic/socket.h with the kernel sources
mptcp: Fix data stream corruption in the address announcement
selftests: net: test for lwtunnel dst ref loops
net: ipv6: ioam6: fix lwtunnel_output() loop
net: lwtunnel: fix recursion loops
net: ti: icssg-prueth: Add lock to stats
net: atm: fix use after free in lec_send()
xsk: fix an integer overflow in xp_create_and_assign_umem()
net: stmmac: dwc-qos-eth: use devm_kzalloc() for AXI data
selftests: drv-net: use defer in the ping test
phy: fix xa_alloc_cyclic() error handling
dpll: fix xa_alloc_cyclic() error handling
devlink: fix xa_alloc_cyclic() error handling
ipv6: Set errno after ip_fib_metrics_init() in ip6_route_info_create().
ipv6: Fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw().
net: ipv6: fix TCP GSO segmentation with NAT
...
|
|
Pull rdma fixes from Jason Gunthorpe:
"Collected driver fixes from the last few weeks, I was surprised how
significant many of them seemed to be.
- Fix rdma-core test failures due to wrong startup ordering in rxe
- Don't crash in bnxt_re if the FW supports more than 64k QPs
- Fix wrong QP table indexing math in bnxt_re
- Calculate the max SRQs for userspace properly in bnxt_re
- Don't try to do math on errno for mlx5's rate calculation
- Properly allow userspace to control the VLAN in the QP state during
INIT->RTR for bnxt_re
- 6 bug fixes for HNS:
- Soft lockup when processing huge MRs, add a cond_resched()
- Fix missed error unwind for doorbell allocation
- Prevent bad send queue parameters from userspace
- Wrong error unwind in qp creation
- Missed xa_destroy during driver shutdown
- Fix reporting to userspace of max_sge_rd, hns doesn't have a
read/write difference"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Fix wrong value of max_sge_rd
RDMA/hns: Fix missing xa_destroy()
RDMA/hns: Fix a missing rollback in error path of hns_roce_create_qp_common()
RDMA/hns: Fix invalid sq params not being blocked
RDMA/hns: Fix unmatched condition in error path of alloc_user_qp_db()
RDMA/hns: Fix soft lockup during bt pages loop
RDMA/bnxt_re: Avoid clearing VLAN_ID mask in modify qp path
RDMA/mlx5: Handle errors returned from mlx5r_ib_rate()
RDMA/bnxt_re: Fix reporting maximum SRQs on P7 chips
RDMA/bnxt_re: Add missing paranthesis in map_qp_id_to_tbl_indx
RDMA/bnxt_re: Fix allocation of QP table
RDMA/rxe: Fix the failure of ibv_query_device() and ibv_query_device_ex() tests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- sdhci-brcmstb: Fix CQE suspend/resume support
- atmel-mci: Add a missing clk_disable_unprepare() in ->probe()
* tag 'mmc-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-brcmstb: add cqhci suspend/resume to PM ops
mmc: atmel-mci: Add missing clk_disable_unprepare()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Here's a final batch of EFI fixes for v6.14.
The efivarfs ones are fixes for changes that were made this cycle.
James's fix is somewhat of a band-aid, but it was blessed by the VFS
folks, who are working with James to come up with something better for
the next cycle.
- Avoid physical address 0x0 for random page allocations
- Add correct lockdep annotation when traversing efivarfs on resume
- Avoid NULL mount in kernel_file_open() when traversing efivarfs on
resume"
* tag 'efi-fixes-for-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efivarfs: fix NULL dereference on resume
efivarfs: use I_MUTEX_CHILD nested lock to traverse variables on resume
efi/libstub: Avoid physical address 0x0 when doing random allocation
|
|
Andrea has made significant contributions to SRv6 support in Linux.
Acknowledge the work and on-going interest in Srv6 support with a
maintainers entry for these files so hopefully he is included
on patches going forward.
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250312092212.46299-1-dsahern@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Guillaume Nault says:
====================
gre: Revert IPv6 link-local address fix.
Following Paolo's suggestion, let's revert the IPv6 link-local address
generation fix for GRE devices. The patch introduced regressions in the
upstream CI, which are still under investigation.
Start by reverting the kselftest that depend on that fix (patch 1), then
revert the kernel code itself (patch 2).
====================
Link: https://patch.msgid.link/cover.1742418408.git.gnault@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 183185a18ff96751db52a46ccf93fff3a1f42815.
This patch broke net/forwarding/ip6gre_custom_multipath_hash.sh in some
circumstances (https://lore.kernel.org/netdev/Z9RIyKZDNoka53EO@mini-arch/).
Let's revert it while the problem is being investigated.
Fixes: 183185a18ff9 ("gre: Fix IPv6 link-local address generation.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/8b1ce738eb15dd841aab9ef888640cab4f6ccfea.1742418408.git.gnault@redhat.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
devices."
This reverts commit 6f50175ccad4278ed3a9394c00b797b75441bd6e.
Commit 183185a18ff9 ("gre: Fix IPv6 link-local address generation.") is
going to be reverted. So let's revert the corresponding kselftest
first.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/259a9e98f7f1be7ce02b53d0b4afb7c18a8ff747.1742418408.git.gnault@redhat.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-03-19
1) Fix tunnel mode TX datapath in packet offload mode
by directly putting it to the xmit path.
From Alexandre Cassen.
2) Force software GSO only in tunnel mode in favor
of potential HW GSO. From Cosmin Ratiu.
ipsec-2025-03-19
* tag 'ipsec-2025-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm_output: Force software GSO only in tunnel mode
xfrm: fix tunnel mode TX datapath in packet offload mode
====================
Link: https://patch.msgid.link/20250319065513.987135-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is batman-adv bugfix:
- Ignore own maximum aggregation size during RX, Sven Eckelmann
* tag 'batadv-net-pullrequest-20250318' of git://git.open-mesh.org/linux-merge:
batman-adv: Ignore own maximum aggregation size during RX
====================
Link: https://patch.msgid.link/20250318150035.35356-1-sw@simonwunderlich.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Previous commit 8b5c171bb3dc ("neigh: new unresolved queue limits")
introduces new netlink attribute NDTPA_QUEUE_LENBYTES to represent
approximative value for deprecated QUEUE_LEN. However, it forgot to add
the associated nla_policy in nl_ntbl_parm_policy array. Fix it with one
simple NLA_U32 type policy.
Fixes: 8b5c171bb3dc ("neigh: new unresolved queue limits")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://patch.msgid.link/20250315165113.37600-1-linma@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This also fixes a wrong definitions for SCM_TS_OPT_ID & SO_RCVPRIORITY.
Accidentally found while working on another patchset.
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Cc: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Fixes: a89568e9be75 ("selftests: txtimestamp: add SCM_TS_OPT_ID test")
Fixes: e45469e594b2 ("sock: Introduce SO_RCVPRIORITY socket option")
Link: https://lore.kernel.org/netdev/20250314195257.34854-1-kuniyu@amazon.com/
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250314214155.16046-1-aleksandr.mikhalitsyn@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Because of the size restriction in the TCP options space, the MPTCP
ADD_ADDR option is exclusive and cannot be sent with other MPTCP ones.
For this reason, in the linked mptcp_out_options structure, group of
fields linked to different options are part of the same union.
There is a case where the mptcp_pm_add_addr_signal() function can modify
opts->addr, but not ended up sending an ADD_ADDR. Later on, back in
mptcp_established_options, other options will be sent, but with
unexpected data written in other fields due to the union, e.g. in
opts->ext_copy. This could lead to a data stream corruption in the next
packet.
Using an intermediate variable, prevents from corrupting previously
established DSS option. The assignment of the ADD_ADDR option
parameters is now done once we are sure this ADD_ADDR option can be set
in the packet, e.g. after having dropped other suboptions.
Fixes: 1bff1e43a30e ("mptcp: optimize out option generation")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Arthur Mongodin <amongodin@randorisec.fr>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
[ Matt: the commit message has been updated: long lines splits and some
clarifications. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-net-mptcp-fix-data-stream-corr-sockopt-v1-1-122dbb249db3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Justin Iurman says:
====================
net: fix lwtunnel reentry loops
When the destination is the same after the transformation, we enter a
lwtunnel loop. This is true for most of lwt users: ioam6, rpl, seg6,
seg6_local, ila_lwt, and lwt_bpf. It can happen in their input() and
output() handlers respectively, where either dst_input() or dst_output()
is called at the end. It can also happen in xmit() handlers.
Here is an example for rpl_input():
dump_stack_lvl+0x60/0x80
rpl_input+0x9d/0x320
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
[...]
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
ip6_sublist_rcv_finish+0x85/0x90
ip6_sublist_rcv+0x236/0x2f0
... until rpl_do_srh() fails, which means skb_cow_head() failed.
This series provides a fix at the core level of lwtunnel to catch such
loops when they're not caught by the respective lwtunnel users, and
handle the loop case in ioam6 which is one of the users. This series
also comes with a new selftest to detect some dst cache reference loops
in lwtunnel users.
====================
Link: https://patch.msgid.link/20250314120048.12569-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As recently specified by commit 0ea09cbf8350 ("docs: netdev: add a note
on selftest posting") in net-next, the selftest is therefore shipped in
this series. However, this selftest does not really test this series. It
needs this series to avoid crashing the kernel. What it really tests,
thanks to kmemleak, is what was fixed by the following commits:
- commit c71a192976de ("net: ipv6: fix dst refleaks in rpl, seg6 and
ioam6 lwtunnels")
- commit 92191dd10730 ("net: ipv6: fix dst ref loops in rpl, seg6 and
ioam6 lwtunnels")
- commit c64a0727f9b1 ("net: ipv6: fix dst ref loop on input in seg6
lwt")
- commit 13e55fbaec17 ("net: ipv6: fix dst ref loop on input in rpl
lwt")
- commit 0e7633d7b95b ("net: ipv6: fix dst ref loop in ila lwtunnel")
- commit 5da15a9c11c1 ("net: ipv6: fix missing dst ref drop in ila
lwtunnel")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250314120048.12569-4-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix the lwtunnel_output() reentry loop in ioam6_iptunnel when the
destination is the same after transformation. Note that a check on the
destination address was already performed, but it was not enough. This
is the example of a lwtunnel user taking care of loops without relying
only on the last resort detection offered by lwtunnel.
Fixes: 8cb3bf8bff3c ("ipv6: ioam: Add support for the ip6ip6 encapsulation")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250314120048.12569-3-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch acts as a parachute, catch all solution, by detecting
recursion loops in lwtunnel users and taking care of them (e.g., a loop
between routes, a loop within the same route, etc). In general, such
loops are the consequence of pathological configurations. Each lwtunnel
user is still free to catch such loops early and do whatever they want
with them. It will be the case in a separate patch for, e.g., seg6 and
seg6_local, in order to provide drop reasons and update statistics.
Another example of a lwtunnel user taking care of loops is ioam6, which
has valid use cases that include loops (e.g., inline mode), and which is
addressed by the next patch in this series. Overall, this patch acts as
a last resort to catch loops and drop packets, since we don't want to
leak something unintentionally because of a pathological configuration
in lwtunnels.
The solution in this patch reuses dev_xmit_recursion(),
dev_xmit_recursion_inc(), and dev_xmit_recursion_dec(), which seems fine
considering the context.
Closes: https://lore.kernel.org/netdev/2bc9e2079e864a9290561894d2a602d6@akamai.com/
Closes: https://lore.kernel.org/netdev/Z7NKYMY7fJT5cYWu@shredder/
Fixes: ffce41962ef6 ("lwtunnel: support dst output redirect function")
Fixes: 2536862311d2 ("lwt: Add support to redirect dst.input")
Fixes: 14972cbd34ff ("net: lwtunnel: Handle fragmentation")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250314120048.12569-2-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently the API emac_update_hardware_stats() reads different ICSSG
stats without any lock protection.
This API gets called by .ndo_get_stats64() which is only under RCU
protection and nothing else. Add lock to this API so that the reading of
statistics happens during lock.
Fixes: c1e10d5dc7a1 ("net: ti: icssg-prueth: Add ICSSG Stats")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314102721.1394366-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ->send() operation frees skb so save the length before calling
->send() to avoid a use after free.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/c751531d-4af4-42fe-affe-6104b34b791d@stanley.mountain
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since the i and pool->chunk_size variables are of type 'u32',
their product can wrap around and then be cast to 'u64'.
This can lead to two different XDP buffers pointing to the same
memory area.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: 94033cd8e73b ("xsk: Optimize for aligned case")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Link: https://patch.msgid.link/20250313085007.3116044-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_event: Fix connection regression between LE and non-LE adapters
- Fix error code in chan_alloc_skb_cb()
* tag 'for-net-2025-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_event: Fix connection regression between LE and non-LE adapters
Bluetooth: Fix error code in chan_alloc_skb_cb()
====================
Link: https://patch.msgid.link/20250314163847.110069-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix an entry in MAINTAINERS to avoid sending hwmon review requests to
the i2c mailing list
- Fix an out-of-bounds access in nct6775 driver
* tag 'hwmon-fixes-for-v6.14-rc8/6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct6775-core) Fix out of bounds access for NCT679{8,9}
MAINTAINERS: correct list and scope of LTC4286 HARDWARE MONITOR
|
|
Everywhere else in the driver uses devm_kzalloc() when allocating the
AXI data, so there is no kfree() of this structure. However,
dwc-qos-eth uses kzalloc(), which leads to this memory being leaked.
Switch to use devm_kzalloc().
Fixes: d8256121a91a ("stmmac: adding new glue driver dwmac-dwc-qos-eth")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tsRyv-0064nU-O9@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make sure the test cleans up after itself. The XDP off statements
at the end of the test may not be reached.
Fixes: 75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312131040.660386-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Fix a regression on ATI AHCI controllers, where certain Samsung
drives fails to be detected on a warm boot when LPM is enabled.
LPM on ATI AHCI works fine with other drives. Likewise, the
Samsung drives works fine with LPM with other AHI controllers.
Thus, just like the weirdo ATA_QUIRK_NO_NCQ_ON_ATI quirk, add a
new ATA_QUIRK_NO_LPM_ON_ATI quirk to disable LPM only on ATI
AHCI controllers.
* tag 'ata-6.14-final' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Add ATA_QUIRK_NO_LPM_ON_ATI for certain Samsung SSDs
|
|
Michal Swiatkowski says:
====================
fix xa_alloc_cyclic() return checks
Pierre Riteau <pierre@stackhpc.com> found suspicious handling an error
from xa_alloc_cyclic() in scheduler code [1]. The same is done in few
other places.
v1 --> v2: [2]
* add fixes tags
* fix also the same usage in dpll and phy
[1] https://lore.kernel.org/netdev/20250213223610.320278-1-pierre@stackhpc.com/
[2] https://lore.kernel.org/netdev/20250214132453.4108-1-michal.swiatkowski@linux.intel.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
xa_alloc_cyclic() can return 1, which isn't an error. To prevent
situation when the caller of this function will treat it as no error do
a check only for negative here.
Fixes: 384968786909 ("net: phy: Introduce ethernet link topology representation")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case of returning 1 from xa_alloc_cyclic() (wrapping) ERR_PTR(1) will
be returned, which will cause IS_ERR() to be false. Which can lead to
dereference not allocated pointer (pin).
Fix it by checking if err is lower than zero.
This wasn't found in real usecase, only noticed. Credit to Pierre.
Fixes: 97f265ef7f5b ("dpll: allocate pin ids in cycle")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case of returning 1 from xa_alloc_cyclic() (wrapping) ERR_PTR(1) will
be returned, which will cause IS_ERR() to be false. Which can lead to
dereference not allocated pointer (rel).
Fix it by checking if err is lower than zero.
This wasn't found in real usecase, only noticed. Credit to Pierre.
Fixes: c137743bce02 ("devlink: introduce object and nested devlink relationship infra")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- Fix amlogic T7 ISP secpower
* tag 'pmdomain-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: amlogic: fix T7 ISP secpower
|
|
While creating a new IPv6, we could get a weird -ENOMEM when
RTA_NH_ID is set and either of the conditions below is true:
1) CONFIG_IPV6_SUBTREES is enabled and rtm_src_len is specified
2) nexthop_get() fails
e.g.)
# strace ip -6 route add fe80::dead:beef:dead:beef nhid 1 from ::
recvmsg(3, {msg_iov=[{iov_base=[...[
{error=-ENOMEM, msg=[... [...]]},
[{nla_len=49, nla_type=NLMSGERR_ATTR_MSG}, "Nexthops can not be used with so"...]
]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148
Let's set err explicitly after ip_fib_metrics_init() in
ip6_route_info_create().
Fixes: f88d8ea67fbd ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250312013854.61125-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
fib_check_nh_v6_gw() expects that fib6_nh_init() cleans up everything
when it fails.
Commit 7dd73168e273 ("ipv6: Always allocate pcpu memory in a fib6_nh")
moved fib_nh_common_init() before alloc_percpu_gfp() within fib6_nh_init()
but forgot to add cleanup for fib6_nh->nh_common.nhc_pcpu_rth_output in
case it fails to allocate fib6_nh->rt6i_pcpu, resulting in memleak.
Let's call fib_nh_common_release() and clear nhc_pcpu_rth_output in the
error path.
Note that we can remove the fib6_nh_release() call in nh_create_ipv6()
later in net-next.git.
Fixes: 7dd73168e273 ("ipv6: Always allocate pcpu memory in a fib6_nh")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250312010333.56001-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-03-14
this is a pull request of 6 patches for net/main.
The first patch is by Vincent Mailhol and fixes an out of bound read
in strscpy() in the ucan driver.
Oliver Hartkopp contributes a patch for the af_can statistics to use
atomic access in the hot path.
The next 2 patches are by Biju Das, target the rcar_canfd driver and
fix the page entries in the AFL list.
The 2 patches by Haibo Chen for the flexcan driver fix the suspend and
resume functions.
linux-can-fixes-for-6.14-20250314
* tag 'linux-can-fixes-for-6.14-20250314' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: flexcan: disable transceiver during system PM
can: flexcan: only change CAN state when link up in system PM
can: rcar_canfd: Fix page entries in the AFL list
dt-bindings: can: renesas,rcar-canfd: Fix typo in pattern properties for R-Car V4M
can: statistics: use atomic access in hot path
can: ucan: fix out of bound read in strscpy() source
====================
Link: https://patch.msgid.link/20250314130909.2890541-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When updating the source/destination address, the TCP/UDP checksum needs to
be updated as well.
Fixes: bee88cd5bd83 ("net: add support for segmenting TCP fraglist GSO packets")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20250311212530.91519-1-nbd@nbd.name
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
According to GDMA protocol, holes (zeros) are allowed at the beginning
or middle of the gdma_list_devices_resp message. The existing code
cannot properly handle this, and may miss some devices in the list.
To fix, scan the entire list until the num_of_devs are found, or until
the end of the list.
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@microsoft.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1741723974-1534-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Registering the interrupts for TX or RX DMA Channels prior to registering
their respective NAPI callbacks can result in a NULL pointer dereference.
This is seen in practice as a random occurrence since it depends on the
randomness associated with the generation of traffic by Linux and the
reception of traffic from the wire.
Fixes: 681eb2beb3ef ("net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Co-developed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250311154259.102865-1-s-vadapalli@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Before commit 7627a0edef54 ("ata: ahci: Drop low power policy board type")
the ATI AHCI controllers specified board type 'board_ahci' rather than
board type 'board_ahci'. This means that LPM was historically not enabled
for the ATI AHCI controllers.
By looking at commit 7a8526a5cd51 ("libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI
for Samsung 860 and 870 SSD."), it is clear that, for some unknown reason,
that Samsung SSDs do not play nice with ATI AHCI controllers. (When using
other AHCI controllers, NCQ can be enabled on these Samsung SSDs without
issues.)
In a similar way, from user reports, it is clear the ATI AHCI controllers
can enable LPM on e.g. Maxtor HDDs perfectly fine, but when enabling LPM
on certain Samsung SSDs, things break. (E.g. the SSDs will not get detected
by the ATI AHCI controller even after a COMRESET.)
Yet, when using LPM on these Samsung SSDs with other AHCI controllers, e.g.
Intel AHCI controllers, these Samsung drives appear to work perfectly fine.
Considering that the combination of ATI + Samsung, for some unknown reason,
does not seem to work well, disable LPM when detecting an ATI AHCI
controller with a problematic Samsung SSD.
Apply this new ATA_QUIRK_NO_LPM_ON_ATI quirk for all Samsung SSDs that have
already been reported to not play nice with ATI (ATA_QUIRK_NO_NCQ_ON_ATI).
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: Eric <eric.4.debian@grabatoulnz.fr>
Closes: https://lore.kernel.org/linux-ide/Z8SBZMBjvVXA7OAK@eldamar.lan/
Tested-by: Eric <eric.4.debian@grabatoulnz.fr>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250317170348.1748671-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
LSMs often inspect the path.mnt of files in the security hooks, and this
causes a NULL deref in efivarfs_pm_notify() because the path is
constructed with a NULL path.mnt.
Fix by obtaining from vfs_kern_mount() instead, and being very careful
to ensure that deactivate_super() (potentially triggered by a racing
userspace umount) is not called directly from the notifier, because it
would deadlock when efivarfs_kill_sb() tried to unregister the notifier
chain.
[ Al notes:
Umm... That's probably safe, but not as a long-term solution -
it's too intimately dependent upon fs/super.c internals. The
reasons why you can't run into ->s_umount deadlock here are
non-trivial... ]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Link: https://lore.kernel.org/r/e54e6a2f-1178-4980-b771-4d9bafc2aa47@tnxip.de
Link: https://lore.kernel.org/r/3e998bf87638a442cbc6864cdcd3d8d9e08ce3e3.camel@HansenPartnership.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"15 hotfixes. 7 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
13 are for MM and the other two are for squashfs and procfs.
All are singletons. Please see the individual changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-17-20-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/page_alloc: fix memory accept before watermarks gets initialized
mm: decline to manipulate the refcount on a slab page
memcg: drain obj stock on cpu hotplug teardown
mm/huge_memory: drop beyond-EOF folios with the right number of refs
selftests/mm: run_vmtests.sh: fix half_ufd_size_MB calculation
mm: fix error handling in __filemap_get_folio() with FGP_NOWAIT
mm: memcontrol: fix swap counter leak from offline cgroup
mm/vma: do not register private-anon mappings with khugepaged during mmap
squashfs: fix invalid pointer dereference in squashfs_cache_delete
mm/migrate: fix shmem xarray update during migration
mm/hugetlb: fix surplus pages in dissolve_free_huge_page()
mm/damon/core: initialize damos->walk_completed in damon_new_scheme()
mm/damon: respect core layer filters' allowance decision on ops layer
filemap: move prefaulting out of hot write path
proc: fix UAF in proc_get_inode()
|
|
Unfortunately I no longer have time to meaningfully take part in the
linux kernel development.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The majority of these last fixes are for devicetree files.
These address two important regressions for the Qualcomm SMMU and the
Raspberry Pi 4 USB controller, as well as a larger number of patches
fixing minor mistakes in board specific files for Rockchips, i.MX,
starfive and broadcom.
The non-DT changes are
- A fix for an old boot regression on Renesas shmobile chips
- Another boot time regression for for the Qualcomm PDR SoC driver,
among a few other Qualcomm firmware driver fixes for efivars and
tzmem
- Minor Kconfig fixes for davinci and OMAP1
- Minor code fixes for sparx5 reset controllers, OMAP memory
controller, i.MX SCU, cpufreq and SoC drivers and a Hisilicon SoC
driver
- One more update to the Asahi maintainers, adding Neal Gompa as a
reviewer"
* tag 'soc-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
ARM: davinci: da850: fix selecting ARCH_DAVINCI_DA8XX
soc: hisilicon: kunpeng_hccs: Fix incorrect string assembly
memory: omap-gpmc: drop no compatible check
reset: mchp: sparx5: Fix for lan966x
ARM: shmobile: smp: Enforce shmobile_smp_* alignment
MAINTAINERS: Add myself (Neal Gompa) as a reviewer for ARM Apple support
MAINTAINERS: Add apple-spi driver & binding files
arm64: dts: rockchip: slow down emmc freq for rock 5 itx
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC3200
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC5300
ARM: dts: bcm2711: Don't mark timer regs unconfigured
ARM: OMAP1: select CONFIG_GENERIC_IRQ_CHIP
arm64: dts: rockchip: Add missing PCIe supplies to RockPro64 board dtsi
arm64: dts: rockchip: Add avdd HDMI supplies to RockPro64 board dtsi
arm64: dts: rockchip: Remove undocumented sdmmc property from lubancat-1
arm64: dts: rockchip: fix pinmux of UART5 for PX30 Ringneck on Haikou
arm64: dts: rockchip: fix pinmux of UART0 for PX30 Ringneck on Haikou
arm64: dts: rockchip: fix u2phy1_host status for NanoPi R4S
arm64: dts: bcm2712: PL011 UARTs are actually r1p5
ARM: dts: bcm2711: PL011 UARTs are actually r1p5
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Clean up tprobe correctly when module unload
Tracepoint probes do not set TRACEPOINT_STUB on the 'tpoint' pointer
when unloading a module, thus they show as a normal 'fprobe' instead
of 'tprobe' and never come back
- Fix leakage of tprobe module refcount
When a tprobe's target module is loaded, it gets the module's
refcount in the module notifier but forgot to put it after
registering the probe on it.
Fix it by getting the refcount only when registering tprobe.
* tag 'probes-fixes-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: tprobe-events: Fix leakage of module refcount
tracing: tprobe-events: Fix to clean up tprobe correctly when module unload
|
|
syzbot warns about a potential deadlock, but this is a false positive
resulting from a missing lockdep annotation: iterate_dir() locks the
parent whereas the inode_lock() it warns about locks the child, which is
guaranteed to be a different lock.
So use inode_lock_nested() instead with the appropriate lock class.
Reported-by: syzbot+019072ad24ab1d948228@syzkaller.appspotmail.com
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
pwm_num is set to 7 for these chips, but NCT6776_REG_PWM_MODE and
NCT6776_PWM_MODE_MASK only contain 6 values.
Fix this by adding another 0 to the end of each array.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20250312030832.106475-1-tasos@tasossah.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This entry has a wrong list, i2c instead of hwmon. Also, it states to
maintain Kconfig and Makefile which is not suitable for a single driver.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fixes: 7707cf82e138 ("dt-bindings: hwmon: Add lltc ltc4286 driver bindings")
Link: https://lore.kernel.org/r/20250317091459.41462-2-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
cqhci timeouts observed on brcmstb platforms during suspend:
...
[ 164.832853] mmc0: cqhci: timeout for tag 18
...
Adding cqhci_suspend()/resume() calls to disable cqe
in sdhci_brcmstb_suspend()/resume() respectively to fix
CQE timeouts seen on PM suspend.
Fixes: d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)")
Cc: stable@vger.kernel.org
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250311165946.28190-1-kamal.dasu@broadcom.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Watermarks are initialized during the postcore initcall. Until then, all
watermarks are set to zero. This causes cond_accept_memory() to
incorrectly skip memory acceptance because a watermark of 0 is always met.
This can lead to a premature OOM on boot.
To ensure progress, accept one MAX_ORDER page if the watermark is zero.
Link: https://lkml.kernel.org/r/20250310082855.2587122-1-kirill.shutemov@linux.intel.com
Fixes: dcdfdd40fa82 ("mm: Add support for unaccepted memory")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Reported-by: Farrah Chen <farrah.chen@intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Slab pages now have a refcount of 0, so nobody should be trying to
manipulate the refcount on them. Doing so has little effect; the object
could be freed and reallocated to a different purpose, although the slab
itself would not be until the refcount was put making it behave rather
like TYPESAFE_BY_RCU.
Unfortunately, __iov_iter_get_pages_alloc() does take a refcount. Fix
that to not change the refcount, and make put_page() silently not change
the refcount. get_page() warns so that we can fix any other callers that
need to be changed.
Long-term, networking needs to stop taking a refcount on the pages that it
uses and rely on the caller to hold whatever references are necessary to
make the memory stable. In the medium term, more page types are going to
hav a zero refcount, so we'll want to move get_page() and put_page() out
of line.
Link: https://lkml.kernel.org/r/20250310143544.1216127-1-willy@infradead.org
Fixes: 9aec2fb0fd5e (slab: allocate frozen pages)
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Hannes Reinecke <hare@suse.de>
Closes: https://lore.kernel.org/all/08c29e4b-2f71-4b6d-8046-27e407214d8c@suse.com/
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
