| Age | Commit message (Collapse) | Author |
|---|
|
The calculation done by calc_crc() is equivalent to
~crc32(~0, buf, len), so just use that instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://patch.msgid.link/20250513041402.541527-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the bindings, the MDIO subnode should be called "mdio".
Update the example to match this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/308d72c2fe8e575e6e137b99743329c2d53eceea.1747121550.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a typo in the documentation: "errorrs" -> "errors".
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250513092451.22387-1-alperyasinak1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With some Infineon chips the timeouts in tpm_tis_send_data (both B and
C) can reach up to about 2250 ms.
Timeout C is retried since
commit de9e33df7762 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices")
Timeout B still needs to be extended.
The problem is most commonly encountered with context related operation
such as load context/save context. These are issued directly by the
kernel, and there is no retry logic for them.
When a filesystem is set up to use the TPM for unlocking the boot fails,
and restarting the userspace service is ineffective. This is likely
because ignoring a load context/save context result puts the real TPM
state and the TPM state expected by the kernel out of sync.
Chips known to be affected:
tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54)
Description: SLB9672
Firmware Revision: 15.22
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
Firmware Revision: 7.83
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
Firmware Revision: 5.63
Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Fix Smatch-detected issue:
drivers/char/tpm/tpm-buf.c:208 tpm_buf_read_u8() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:225 tpm_buf_read_u16() error:
uninitialized symbol 'value'.
drivers/char/tpm/tpm-buf.c:242 tpm_buf_read_u32() error:
uninitialized symbol 'value'.
Zero-initialize the return values in tpm_buf_read_u8(), tpm_buf_read_u16(),
and tpm_buf_read_u32() to guard against uninitialized data in case of a
boundary overflow.
Add defensive initialization ensures the return values are always defined,
preventing undefined behavior if the unexpected happens.
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm2_start_auth_session() does not mask TPM RC correctly from the callers:
[ 28.766528] tpm tpm0: A TPM error (2307) occurred start auth session
Process TPM RCs inside tpm2_start_auth_session(), and map them to POSIX
error codes.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 699e3efd6c64 ("tpm: Add HMAC session start and end functions")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Closes: https://lore.kernel.org/linux-integrity/Z_NgdRHuTKP6JK--@gondor.apana.org.au/
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential endless loop when discarding a block group when
disabling discard
- reinstate message when setting a large value of mount option 'commit'
- fix a folio leak when async extent submission fails
* tag 'for-6.15-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add back warning for mount option commit values exceeding 300
btrfs: fix folio leak in submit_one_async_extent()
btrfs: fix discard worker infinite loop after disabling discard
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix sample code that uses trace_array_printk()
The sample code for in kernel use of trace_array (that creates an
instance for use within the kernel) and shows how to use
trace_array_printk() that writes into the created instance, used
trace_printk_init_buffers(). But that function is used to initialize
normal trace_printk() and produces the NOTICE banner which is not
needed for use of trace_array_printk(). The function to initialize
that is trace_array_init_printk() that takes the created trace array
instance as a parameter.
Update the sample code to reflect the proper usage.
- Fix preemption count output for stacktrace event
The tracing buffer shows the preempt count level when an event
executes. Because writing the event itself disables preemption, this
needs to be accounted for when recording. The stacktrace event did
not account for this so the output of the stacktrace event showed
preemption was disabled while the event that triggered the stacktrace
shows preemption is enabled and this leads to confusion. Account for
preemption being disabled for the stacktrace event.
The same happened for stack traces triggered by function tracer.
- Fix persistent ring buffer when trace_pipe is used
The ring buffer swaps the reader page with the next page to read from
the write buffer when trace_pipe is used. If there's only a page of
data in the ring buffer, this swap will cause the "commit" pointer
(last data written) to be on the reader page. If more data is written
to the buffer, it is added to the reader page until it falls off back
into the write buffer.
If the system reboots and the commit pointer is still on the reader
page, even if new data was written, the persistent buffer validator
will miss finding the commit pointer because it only checks the write
buffer and does not check the reader page. This causes the validator
to fail the validation and clear the buffer, where the new data is
lost.
There was a check for this, but it checked the "head pointer", which
was incorrect, because the "head pointer" always stays on the write
buffer and is the next page to swap out for the reader page. Fix the
logic to catch this case and allow the user to still read the data
after reboot.
* tag 'trace-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Fix persistent buffer when commit page is the reader page
ftrace: Fix preemption accounting for stacktrace filter command
ftrace: Fix preemption accounting for stacktrace trigger command
tracing: samples: Initialize trace_array_printk() with the correct function
|
|
The ring buffer is made up of sub buffers (sometimes called pages as they
are by default PAGE_SIZE). It has the following "pages":
"tail page" - this is the page that the next write will write to
"head page" - this is the page that the reader will swap the reader page with.
"reader page" - This belongs to the reader, where it will swap the head
page from the ring buffer so that the reader does not
race with the writer.
The writer may end up on the "reader page" if the ring buffer hasn't
written more than one page, where the "tail page" and the "head page" are
the same.
The persistent ring buffer has meta data that points to where these pages
exist so on reboot it can re-create the pointers to the cpu_buffer
descriptor. But when the commit page is on the reader page, the logic is
incorrect.
The check to see if the commit page is on the reader page checked if the
head page was the reader page, which would never happen, as the head page
is always in the ring buffer. The correct check would be to test if the
commit page is on the reader page. If that's the case, then it can exit
out early as the commit page is only on the reader page when there's only
one page of data in the buffer. There's no reason to iterate the ring
buffer pages to find the "commit page" as it is already found.
To trigger this bug:
# echo 1 > /sys/kernel/tracing/instances/boot_mapped/events/syscalls/sys_enter_fchownat/enable
# touch /tmp/x
# chown sshd /tmp/x
# reboot
On boot up, the dmesg will have:
Ring buffer meta [0] is from previous boot!
Ring buffer meta [1] is from previous boot!
Ring buffer meta [2] is from previous boot!
Ring buffer meta [3] is from previous boot!
Ring buffer meta [4] commit page not found
Ring buffer meta [5] is from previous boot!
Ring buffer meta [6] is from previous boot!
Ring buffer meta [7] is from previous boot!
Where the buffer on CPU 4 had a "commit page not found" error and that
buffer is cleared and reset causing the output to be empty and the data lost.
When it works correctly, it has:
# cat /sys/kernel/tracing/instances/boot_mapped/trace_pipe
<...>-1137 [004] ..... 998.205323: sys_enter_fchownat: __syscall_nr=0x104 (260) dfd=0xffffff9c (4294967196) filename=(0xffffc90000a0002c) user=0x3e8 (1000) group=0xffffffff (4294967295) flag=0x0 (0
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250513115032.3e0b97f7@gandalf.local.home
Fixes: 5f3b6e839f3ce ("ring-buffer: Validate boot range memory events")
Reported-by: Tasos Sahanidis <tasos@tasossah.com>
Tested-by: Tasos Sahanidis <tasos@tasossah.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The preemption count of the stacktrace filter command to trace ksys_read
is consistently incorrect:
$ echo ksys_read:stacktrace > set_ftrace_filter
<...>-453 [004] ...1. 38.308956: <stack trace>
=> ksys_read
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The root cause is that the trace framework disables preemption when
invoking the filter command callback in function_trace_probe_call:
preempt_disable_notrace();
probe_ops->func(ip, parent_ip, probe_opsbe->tr, probe_ops, probe->data);
preempt_enable_notrace();
Use tracing_gen_ctx_dec() to account for the preempt_disable_notrace(),
which will output the correct preemption count:
$ echo ksys_read:stacktrace > set_ftrace_filter
<...>-410 [006] ..... 31.420396: <stack trace>
=> ksys_read
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
Cc: stable@vger.kernel.org
Fixes: 36590c50b2d07 ("tracing: Merge irqflags + preempt counter.")
Link: https://lore.kernel.org/20250512094246.1167956-2-dolinux.peng@gmail.com
Signed-off-by: pengdonglin <dolinux.peng@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When using the stacktrace trigger command to trace syscalls, the
preemption count was consistently reported as 1 when the system call
event itself had 0 (".").
For example:
root@ubuntu22-vm:/sys/kernel/tracing/events/syscalls/sys_enter_read
$ echo stacktrace > trigger
$ echo 1 > enable
sshd-416 [002] ..... 232.864910: sys_read(fd: a, buf: 556b1f3221d0, count: 8000)
sshd-416 [002] ...1. 232.864913: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The root cause is that the trace framework disables preemption in __DO_TRACE before
invoking the trigger callback.
Use the tracing_gen_ctx_dec() that will accommodate for the increase of
the preemption count in __DO_TRACE when calling the callback. The result
is the accurate reporting of:
sshd-410 [004] ..... 210.117660: sys_read(fd: 4, buf: 559b725ba130, count: 40000)
sshd-410 [004] ..... 210.117662: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
Cc: stable@vger.kernel.org
Fixes: ce33c845b030c ("tracing: Dump stacktrace trigger to the corresponding instance")
Link: https://lore.kernel.org/20250512094246.1167956-1-dolinux.peng@gmail.com
Signed-off-by: pengdonglin <dolinux.peng@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fix from Kees Cook:
"This fixes a corner case for ASLR-disabled static-PIE brk collision
with vdso allocations:
- binfmt_elf: Move brk for static PIE even if ASLR disabled"
* tag 'execve-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf: Move brk for static PIE even if ASLR disabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These all address issues in devicetree files:
- The Rockchip rk3588j are now limited the same way as the vendor
kernel, to allow room for the industrial-grade temperature ranges.
- Seven more Rockchip fixes address minor issues with specific boards
- Invalid clk controller references in multiple amlogic chips, plus
one accidentally disabled audio on clock
- Two devicetree fixes for i.MX8MP boards, both for incorrect
regulator settings
- A power domain change for apple laptop touchbar, fixing
suspend/resume problems
- An incorrect DMA controller setting for sophgo cv18xx chips"
* tag 'soc-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: amazon: Fix simple-bus node name schema warnings
MAINTAINERS: delete email for Shiraz Hashim
arm64: dts: imx8mp-var-som: Fix LDO5 shutdown causing SD card timeout
arm64: dts: imx8mp: use 800MHz NoC OPP for nominal drive mode
arm64: dts: amlogic: dreambox: fix missing clkc_audio node
riscv: dts: sophgo: fix DMA data-width configuration for CV18xx
arm64: dts: rockchip: fix Sige5 RTC interrupt pin
arm64: dts: rockchip: Assign RT5616 MCLK rate on rk3588-friendlyelec-cm3588
arm64: dts: rockchip: Align wifi node name with bindings in CB2
arm64: dts: amlogic: g12: fix reference to unknown/untested PWM clock
arm64: dts: amlogic: gx: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8b: fix reference to unknown/untested PWM clock
ARM: dts: amlogic: meson8: fix reference to unknown/untested PWM clock
arm64: dts: apple: touchbar: Mark ps_dispdfr_be as always-on
mailmap: Update email for Asahi Lina
arm64: dts: rockchip: Fix mmc-pwrseq clock name on rock-pi-4
arm64: dts: rockchip: Use "regulator-fixed" for btreg on px30-engicam for vcc3v3-btreg
arm64: dts: rockchip: Add pinmuxing for eMMC on QNAP TS433
arm64: dts: rockchip: Remove overdrive-mode OPPs from RK3588J SoC dtsi
arm64: dts: rockchip: Allow Turing RK1 cooling fan to spin down
|
|
The hardware supports multiple MAC types, including RPM, SDP, and LBK.
However, features such as link settings and pause frames are only available
on RPM MAC, and not supported on SDP or LBK.
This patch updates the ethtool operations logic accordingly to reflect
this behavior.
Fixes: 2f7f33a09516 ("octeontx2-pf: Add representors for sdp MAC")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The kernel test robot reported the following error:
drivers/net/ethernet/freescale/enetc/ntmp.c: In function 'ntmp_fill_request_hdr':
drivers/net/ethernet/freescale/enetc/ntmp.c:203:38: error: implicit
declaration of function 'FIELD_PREP' [-Wimplicit-function-declaration]
203 | cbd->req_hdr.access_method = FIELD_PREP(NTMP_ACCESS_METHOD,
| ^~~~~~~~~~
Therefore, add "bitfield.h" to ntmp_private.h to fix this issue.
Fixes: 4701073c3deb ("net: enetc: add initial netc-lib driver to support NTMP")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505101047.NTMcerZE-lkp@intel.com/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are wrong "#endif" comments in .h files need to be corrected.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In one of the error paths in qlcnic_sriov_channel_cfg_cmd(), the memory
allocated in qlcnic_sriov_alloc_bc_mbx_args() for mailbox arguments is
not freed. Fix that by jumping to the error path that frees them, by
calling qlcnic_free_mbx_args(). This was found using static analysis.
Fixes: f197a7aa6288 ("qlcnic: VF-PF communication channel implementation")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250512044829.36400-1-abdun.nihaal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The functionality of mdiobus_register_board_info() typically isn't
optional for the caller. Therefore remove the stub.
Note: Currently we have only one caller of mdiobus_register_board_info(),
in a DSA/PHYLINK context. Therefore CONFIG_MDIO_DEVICE is selected anyway.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/410a2222-c4e8-45b0-9091-d49674caeb00@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the mlxsw driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
The UAPI is still ioctl-only, but it's best to remove the "ioctl"
mentions from the driver in case a netlink variant appears.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250512154411.848614-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It can't vary, stop storing the same magic number everywhere.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Alex Elder <elder@kernel.org>
Link: https://patch.msgid.link/20250512-topic-ipa_smem-v1-1-302679514a0d@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The first paragraph makes no grammatical sense. I suppose a portion of
the intended sentece is missing: "[The challenge with ] stacked PHCs
(...) is that they uncover bugs".
Rephrase, and at the same time simplify the structure of the sentence a
little bit, it is not easy to follow.
Fixes: 94d9f78f4d64 ("docs: networking: timestamping: add section for stacked PHC devices")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20250512131751.320283-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the ENETC driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
Move the enetc_hwtstamp_get() and enetc_hwtstamp_set() calls away from
enetc_ioctl() to dedicated net_device_ops for the LS1028A PF and VF
(NETC v4 does not yet implement enetc_ioctl()), adapt the prototypes and
export these symbols (enetc_ioctl() is also exported).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250512112402.4100618-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For unknown reasons, sometimes the value of MISC interrupt is 0 in the
IRQ handle function. In this case, wx_intr_enable() is also should be
invoked to clear the interrupt. Otherwise, the next interrupt would
never be reported.
Fixes: a9843689e2de ("net: txgbe: add sriov function support")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/F4F708403CE7090B+20250512100652.139510-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MACsec offload is not supported in switchdev mode for uplink
representors. When switching to the uplink representor profile, the
MACsec offload feature must be cleared from the netdevice's features.
If left enabled, attempts to add offloads result in a null pointer
dereference, as the uplink representor does not support MACsec offload
even though the feature bit remains set.
Clear NETIF_F_HW_MACSEC in mlx5e_fix_uplink_rep_features().
Kernel log:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 29 UID: 0 PID: 4714 Comm: ip Not tainted 6.14.0-rc4_for_upstream_debug_2025_03_02_17_35 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__mutex_lock+0x128/0x1dd0
Code: d0 7c 08 84 d2 0f 85 ad 15 00 00 8b 35 91 5c fe 03 85 f6 75 29 49 8d 7e 60 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a6 15 00 00 4d 3b 76 60 0f 85 fd 0b 00 00 65 ff
RSP: 0018:ffff888147a4f160 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 000000000000000f RSI: 0000000000000000 RDI: 0000000000000078
RBP: ffff888147a4f2e0 R08: ffffffffa05d2c19 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: 0000000000000018 R15: ffff888152de0000
FS: 00007f855e27d800(0000) GS:ffff88881ee80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004e5768 CR3: 000000013ae7c005 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
Call Trace:
<TASK>
? die_addr+0x3d/0xa0
? exc_general_protection+0x144/0x220
? asm_exc_general_protection+0x22/0x30
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? __mutex_lock+0x128/0x1dd0
? lockdep_set_lock_cmp_fn+0x190/0x190
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? mutex_lock_io_nested+0x1ae0/0x1ae0
? lock_acquire+0x1c2/0x530
? macsec_upd_offload+0x145/0x380
? lockdep_hardirqs_on_prepare+0x400/0x400
? kasan_save_stack+0x30/0x40
? kasan_save_stack+0x20/0x40
? kasan_save_track+0x10/0x30
? __kasan_kmalloc+0x77/0x90
? __kmalloc_noprof+0x249/0x6b0
? genl_family_rcv_msg_attrs_parse.constprop.0+0xb5/0x240
? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core]
? mlx5e_macsec_add_rxsa+0x11a0/0x11a0 [mlx5_core]
macsec_update_offload+0x26c/0x820
? macsec_set_mac_address+0x4b0/0x4b0
? lockdep_hardirqs_on_prepare+0x284/0x400
? _raw_spin_unlock_irqrestore+0x47/0x50
macsec_upd_offload+0x2c8/0x380
? macsec_update_offload+0x820/0x820
? __nla_parse+0x22/0x30
? genl_family_rcv_msg_attrs_parse.constprop.0+0x15e/0x240
genl_family_rcv_msg_doit+0x1cc/0x2a0
? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
? cap_capable+0xd4/0x330
genl_rcv_msg+0x3ea/0x670
? genl_family_rcv_msg_dumpit+0x2a0/0x2a0
? lockdep_set_lock_cmp_fn+0x190/0x190
? macsec_update_offload+0x820/0x820
netlink_rcv_skb+0x12b/0x390
? genl_family_rcv_msg_dumpit+0x2a0/0x2a0
? netlink_ack+0xd80/0xd80
? rwsem_down_read_slowpath+0xf90/0xf90
? netlink_deliver_tap+0xcd/0xac0
? netlink_deliver_tap+0x155/0xac0
? _copy_from_iter+0x1bb/0x12c0
genl_rcv+0x24/0x40
netlink_unicast+0x440/0x700
? netlink_attachskb+0x760/0x760
? lock_acquire+0x1c2/0x530
? __might_fault+0xbb/0x170
netlink_sendmsg+0x749/0xc10
? netlink_unicast+0x700/0x700
? __might_fault+0xbb/0x170
? netlink_unicast+0x700/0x700
__sock_sendmsg+0xc5/0x190
____sys_sendmsg+0x53f/0x760
? import_iovec+0x7/0x10
? kernel_sendmsg+0x30/0x30
? __copy_msghdr+0x3c0/0x3c0
? filter_irq_stacks+0x90/0x90
? stack_depot_save_flags+0x28/0xa30
___sys_sendmsg+0xeb/0x170
? kasan_save_stack+0x30/0x40
? copy_msghdr_from_user+0x110/0x110
? do_syscall_64+0x6d/0x140
? lock_acquire+0x1c2/0x530
? __virt_addr_valid+0x116/0x3b0
? __virt_addr_valid+0x1da/0x3b0
? lock_downgrade+0x680/0x680
? __delete_object+0x21/0x50
__sys_sendmsg+0xf7/0x180
? __sys_sendmsg_sock+0x20/0x20
? kmem_cache_free+0x14c/0x4e0
? __x64_sys_close+0x78/0xd0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f855e113367
Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RSP: 002b:00007ffd15e90c88 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f855e113367
RDX: 0000000000000000 RSI: 00007ffd15e90cf0 RDI: 0000000000000004
RBP: 00007ffd15e90dbc R08: 0000000000000028 R09: 000000000045d100
R10: 00007f855e011dd8 R11: 0000000000000246 R12: 0000000000000019
R13: 0000000067c6b785 R14: 00000000004a1e80 R15: 0000000000000000
</TASK>
Modules linked in: 8021q garp mrp sch_ingress openvswitch nsh mlx5_ib mlx5_fwctl mlx5_dpll mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: mlx5_core]
---[ end trace 0000000000000000 ]---
Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1746958552-561295-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tariq Toukan says:
====================
net/mlx5: HWS, Complex Matchers and rehash mechanism fixes
Motivation:
----------
A matcher can match a certain set of match parameters. However,
the number and size of match params for a single matcher are
limited — all the parameters must fit within a single definer.
A common example of this limitation is IPv6 address matching, where
matching both source and destination IPs requires more bits than a
single definer can support.
SW Steering addresses this limitation by chaining multiple Steering
Table Entries (STEs) within the same matcher, where each STE matches
on a subset of the parameters.
In HW Steering, such chaining is not possible — the matcher's STEs
are managed in a hash table, and a single definer is used to calculate
the hash index for STEs.
Overview:
--------
To address this limitation in HW Steering, we introduce
*Complex Matchers*, which consist of two chained matchers. This allows
matching on twice as many parameters. Complex Matchers are filled with
*Complex Rules* — rules that are split into two parts and inserted into
their respective matchers.
The first half of the Complex Matcher is a regular matcher and points
to the second half, which is an *Isolated Matcher*. An Isolated Matcher
has its own isolated table and is accessible only by traffic coming
from the first half of the Complex Matcher.
This splitting of matchers/rules into multiple parts is transparent to
users. It is hidden behind the BWC HWS API. It becomes visible only
when dumping steering debug information, where the Complex Matcher
appears as two separate matchers: one in the user-created table and
another in its isolated table.
Implementation Details:
----------------------
All user actions are performed on the second part of the rules only.
The first part handles matching and applies two actions: modify header
(set metadata, see details below) and go-to-table (directing traffic
to the isolated table containing the isolated matcher).
Rule updates (updating rule actions) are applied to the second part
of the rule since user-provided actions are not executed in the first
matcher.
We use REG_C_6 metadata register to set and match on unique per-rule
tag (see details below).
Splitting rules into two parts introduces new challenges:
1. Invalid Combinations
Consider two rules with different matching values:
- Rule 1: A+B
- Rule 2: C+D
Let's split the rules into two parts as follows:
|-----Complex Matcher-------|
| |
| 1st matcher 2nd matcher |
| |---| |---| |
| | A | | B | |
| |---| -----> |---| |
| | C | | D | |
| |---| |---| |
| |
|---------------------------|
Splitting these rules results in invalid combinations: A+D and C+B:
any packet that matched on A will be forwarded to the 2nd matcher,
where it will try to match on B (which is legal, and it is what the
user asked for), but it will also try to match on D (which is not
what the user asked for). To resolve this, we assign unique tags
to each rule on the first matcher and match on these tags on the
second matcher:
|----------| |---------|
| A | | B, TagA |
| action: | | |
| set TagA | | |
|----------| --> |---------|
| C | | D, TagB |
| action: | | |
| set TagB | | |
|----------| |---------|
2. Duplicated Entries:
Consider two rules with overlapping values:
- Rule 1: A+B
- Rule 2: A+D
Let's split the rules into two parts as follows:
|---| |---|
| A | | B |
|---| --> |---|
| | | D |
|---| |---|
This leads to the duplicated entries on the first matcher, which HWS
doesn't allow: subsequent delete of either of the rules will delete
the only entry in the first matcher, leaving the remaining rule
broken. To address this, we use a reference count for entries in the
first matcher and delete STEs only when their refcount reaches zero.
Both challenges are resolved by having a per-matcher data structure
(implemented with rhashtable) that manages refcounts for the first part
of the rules and holds unique tags (managed via IDA) for these rules to
set and to match on the second matcher.
Limitations:
-----------
We utilize metadata register REG_C_6 in this implementation, so its
usage anywhere along the flow that might include the need for Complex
Matcher is prohibited.
The number and size of match parameters remain limited — now
constrained by what can be represented by two definers instead of one.
This architectural limitation arises from the structure of Complex
Matchers. If future requirements demand more parameters, Complex
Matchers can be extended beyond two matchers.
Additionally, there is an implementation limit of 32 match parameters
per matcher (disregarding parameter size). This limit can be lifted
if needed.
Patches:
-------
- Patches 1-3: small additions/refactoring in preparation for
Complex Matcher: exposed mlx5hws_table_ft_set_next_ft() in header,
added definer function to convert field name enum to string,
expose the polling function mlx5hws_bwc_queue_poll() in a header.
- Patch 4: in preparation for Complex Matcher, this patch adds
support for Isolated Matcher.
- Patch 5: the main patch - Complex Matchers implementation.
[2]
Patch 6: fixing the usecase where rule insertion was failing,
but rehash couldn't be initiated if the number of rules in
the table is below the rehash threshold.
Patch 7: fixing the usecase where many rules in parallel
would require rehash, due to the way the counting of rules
was done.
Patch 8: fixing the case where rules were requiring action
template extension in parallel, leading to unneeded extensions
with the same templates.
Patch 9: refactor and simplify the rehash loop.
Patch 10: dump error completion details, which helps a lot
in trying to understand what went wrong, especially during
rehash.
====================
Link: https://patch.msgid.link/1746992290-568936-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Failing to insert/delete a rule should not happen. If it does happen,
it would be good to know at which stage it happened and what was the
failure. This patch adds printing of bad CQE details.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1746992290-568936-11-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reworking the rehash loop - simplifying the code and making it less
error prone:
- Instead of doing round-robin on all the queues with batch of rules in
each cycle, just go over all the queues and move all the rules that
belong to this queue.
- If at some stage of moving the rule we get a failure (which should
not happen), this can't be rolled back. So instead of aborting
rehash and leaving the matcher in a broken state, allow the loop
to continue: attempt to move the rest of the rules and delete the
old matcher. A rule that failed to move to a new matcher will loose
its match STE once the rehash is completed and the old matcher is
deleted, so the rule won't match any traffic any more. This rule's
packets will fall back to the steering pipeline w/o HW offload.
Rehash procedure will return an error, which will cause the rule
insertion to fail for the rule that started this whole rehash.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1746992290-568936-10-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a rule is inserted into a matcher, we search for the suitable
action template. If such template is not found, action template array
is extended with the new template. However, when several threads are
performing this in parallel, there is a race - we can end up with
extending the action templates array with the same template.
This patch is doing the following:
- refactor the code to find action template index in rule create and
update, have the common code in an auxiliary function
- after locking all the queues, check again if the action template
array still needs to be extended
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1746992290-568936-9-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently the counter that counts number of rules in a matcher is
increased only when rule insertion is completed. In a multi-threaded
usecase this can lead to a scenario that many rules can be in process
of insertion in the same matcher, while none of them has completed
the insertion and the rule counter is not updated. This results in
a rule insertion failure for many of them at first attempt, which
leads to all of them requiring rehash and requiring locking of all
the queue locks.
This patch fixes the case by increasing the rule counter in the
beginning of insertion process and decreasing in case of any failure.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1746992290-568936-8-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rules are inserted into hash table in accordance with their hash index.
When a certain number of rules is reached, the table is rehashed:
a bigger new table is allocated and all the rules are moved there.
But sometimes a new rule can't be inserted into the hash table
because its index is full, even though the number of rules in the
table is well below the threshold. The hash function is not perfect,
so such cases are not rare. When that happens, we want to do the same
rehash, in order to increase the table size and lower the probability
for such cases.
This patch fixes the usecase where rule insertion was failing, but
rehash couldn't be initiated due to low number of rules: it adds flag
that denotes that rehash is required, even if the number of rules in
the table is below the rehash threshold.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1746992290-568936-7-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds support for Complex Matchers/Rules
Overview:
--------
A matcher can match on a certain set of match parameters. However, the
number and size of match params for a single matcher are limited: all
the parameters must fit within a single definer.
A common example of this limitation is IPv6 address matching, where
matching both source and destination IPs requires more bits than a
single definer can support.
SW Steering addresses this limitation by chaining multiple Steering
Table Entries (STEs) within the same matcher, where each STE matches
on a subset of the parameters.
In HW Steering, such chaining is not possible — the matcher's STEs
are managed in a hash table, and a single definer is used to calculate
the hash index for STEs.
To address this limitation in HW Steering, we introduce Complex
Matchers, which consist of two chained matchers. This allows matching
on twice as many parameters. Complex Matchers are filled with Complex
Rules — rules that are split into two parts and inserted into their
respective matchers.
The first half of the Complex Matcher is a regular matcher and points
to the second half, which is an Isolated Matcher. An Isolated Matcher
has its own isolated table and is accessible only by traffic coming
from the first half of the Complex Matcher.
This splitting of matchers/rules into multiple parts is transparent to
users. It is hidden under the BWC HWS API. It becomes visible only when
dumping steering debug information, where the Complex Matcher appears
as two separate matchers: one in the user-created table and another
in its isolated table.
Some implementation details:
---------------------------
All user actions are performed on the second part of the rules only.
The first part handles matching and applies two actions: modify header
(set metadata, see details below) and go-to-table (directing traffic to
the isolated table containing the isolated matcher).
Rule updates (updating rule actions) are applied to the second part of
the rule since user-provided actions are not executed in the first
matcher.
We use REG_C_6 metadata register to set and match on unique per-rule
tag (see details below).
Splitting rules into two parts introduces new challenges:
1. Invalid Combinations
Consider two rules with different matching values:
- Rule 1: A+B
- Rule 2: C+D
Let's split the rules into two parts as follows:
|---| |---|
| A | | B |
|---| --> |---|
| C | | D |
|---| |---|
Splitting these rules results in invalid combinations like A+D
and C+B.
To resolve this, we assign unique tags to each rule on the first
matcher and match these tags on the second matcher (the tag is
implemented through modify_hdr action that sets value to metadata
register REG_C_6):
|----------| |---------|
| A | | B, TagA |
| action: | | |
| set TagA | | |
|----------| --> |---------|
| C | | D, TagB |
| action: | | |
| set TagB | | |
|----------| |---------|
2. Duplicated Entries:
Consider two rules with overlapping values:
- Rule 1: A+B
- Rule 2: A+D
Let's split the rules into two parts as follows:
|---| |---|
| A | | B |
|---| --> |---|
| | | D |
|---| |---|
This leads to the duplicated entries on the first matcher, which HWS
doesn't allow: subsequent delete of either of the rules will delete
the only entry in the first matcher, leaving the remaining rule
broken.
To address this, we use a reference count for entries in the first
matcher and delete STEs only when their refcount reaches zero.
Both challenges are resolved by having a per-matcher data structure
(implemented with rhashtable) that manages refcounts for the first part
of the rules and holds unique tags (managed via IDA) for these rules to
set and to match on the second matcher.
Limitations:
-----------
We utilize metadata register REG_C_6 in this implementation, so its
usage anywhere along the steering of the flow that might include the
need for Complex Matcher is prohibited.
The number and size of match parameters remain limited — now it is
constrained by what can be represented by two definers instead of one.
This architectural limitation arises from the structure of Complex
Matchers. If future requirements demand more parameters,
Complex Matchers can be extended beyond two matchers.
Additionally, there is an implementation limit of 32 match parameters
per rule (disregarding parameter size). This limit can be lifted if
needed.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1746992290-568936-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for complex matcher support, introduce the isolated
matcher.
Isolated matcher is a matcher that has its own isolated table.
It is used as the second half of the complex matcher: when the rule
is split into two parts (complex rule), then matching on the first
part will send the packet to the isolated matcher that will try to
match on the second part. In case of miss, the packet goes back to
the matcher's end flow table.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1746992290-568936-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for complex matcher, expose the function that is
polling queue for completion (mlx5hws_bwc_queue_poll) in header
file, so that it will be used by complex matcher code.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1746992290-568936-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for complex matcher support, add function for
converting definer fname to str, which will be used in following
patches.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1746992290-568936-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for complex matcher support, make function
mlx5hws_table_ft_set_next_ft() non-static and expose it in header.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1746992290-568936-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These tests:
"SOCK_STREAM ioctl(SIOCOUTQ) 0 unsent bytes"
"SOCK_SEQPACKET ioctl(SIOCOUTQ) 0 unsent bytes"
output: "Unexpected 'SIOCOUTQ' value, expected 0, got 64 (CLIENT)".
They test that the SIOCOUTQ ioctl reports 0 unsent bytes after the data
have been received by the other side. However, sometimes there is a delay
in updating this "unsent bytes" counter, and the test fails even though
the counter properly goes to 0 several milliseconds later.
The delay occurs in the kernel because the used buffer notification
callback virtio_vsock_tx_done(), called upon receipt of the data by the
other side, doesn't update the counter itself. It delegates that to
a kernel thread (via vsock->tx_work). Sometimes that thread is delayed
more than the test expects.
Change the test to poll SIOCOUTQ until it returns 0 or a timeout occurs.
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 18ee44ce97c1 ("test/vsock: add ioctl unsent bytes test")
Link: https://patch.msgid.link/20250507151456.2577061-1-kshk@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit ce6cb8113c84 ("tools: ynl-gen: individually free previous
values on double set"), specifying the "multi-attr" property raises an
error unless the "nested-attributes" property is specified as well:
File "tools/net/ynl/./pyynl/ynl_gen_c.py", line 1147, in _load_nested_sets
child = self.pure_nested_structs.get(nested)
^^^^^^
UnboundLocalError: cannot access local variable 'nested' where it is not associated with a value
This appears to be a bug since there are existing specs which omit
"nested-attributes" on "multi-attr" attributes. Also, according to
Documentation/userspace-api/netlink/specs.rst, multi-attr "is the
recommended way of implementing arrays (no extra nesting)", suggesting
that nesting should even be avoided in favor of multi-attr.
Fix the indentation of the if-block introduced by the commit to avoid
the error.
Fixes: ce6cb8113c84 ("tools: ynl-gen: individually free previous values on double set")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/d6b58684b7e5bfb628f7313e6893d0097904e1d1.1746940107.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix several build errors when CONFIG_MODULES=n, including the following:
../arch/x86/kernel/alternative.c:195:25: error: incomplete definition of type 'struct module'
195 | for (int i = 0; i < mod->its_num_pages; i++) {
Fixes: 872df34d7c51 ("x86/its: Use dynamic thunks for indirect branches")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- fprobe: Fix RCU warning message in list traversal
fprobe_module_callback() using hlist_for_each_entry_rcu() traverse
the fprobe list but it locks fprobe_mutex() instead of rcu lock
because it is enough. So add lockdep_is_held() to avoid warning.
- tracing: eprobe: Add missing trace_probe_log_clear for eprobe
__trace_eprobe_create() uses trace_probe_log but forgot to clear it
at exit. Add trace_probe_log_clear() calls.
- tracing: probes: Fix possible race in trace_probe_log APIs
trace_probe_log APIs are used in probe event (dynamic_events,
kprobe_events and uprobe_events) creation. Only dynamic_events uses
the dyn_event_ops_mutex mutex to serialize it. This makes kprobe and
uprobe events to lock the same mutex to serialize its creation to
avoid race in trace_probe_log APIs.
* tag 'probes-fixes-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probes: Fix a possible race in trace_probe_log APIs
tracing: add missing trace_probe_log_clear for eprobes
tracing: fprobe: Fix RCU warning message in list traversal
|
|
When bridged ports and standalone ports share a VLAN, e.g. via VLAN
uppers, or untagged traffic with a vlan unaware bridge, the ASIC will
still try to forward traffic to known FDB entries on standalone ports.
But since the port VLAN masks prevent forwarding to bridged ports, this
traffic will be dropped.
This e.g. can be observed in the bridge_vlan_unaware ping tests, where
this breaks pinging with learning on.
Work around this by enabling the simplified EAP mode on switches
supporting it for standalone ports, which causes the ASIC to redirect
traffic of unknown source MAC addresses to the CPU port.
Since standalone ports do not learn, there are no known source MAC
addresses, so effectively this redirects all incoming traffic to the CPU
port.
Fixes: ff39c2d68679 ("net: dsa: b53: Add bridge support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250508091424.26870-1-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since the shared trace_probe_log variable can be accessed and
modified via probe event create operation of kprobe_events,
uprobe_events, and dynamic_events, it should be protected.
In the dynamic_events, all operations are serialized by
`dyn_event_ops_mutex`. But kprobe_events and uprobe_events
interfaces are not serialized.
To solve this issue, introduces dyn_event_create(), which runs
create() operation under the mutex, for kprobe_events and
uprobe_events. This also uses lockdep to check the mutex is
held when using trace_probe_log* APIs.
Link: https://lore.kernel.org/all/174684868120.551552.3068655787654268804.stgit@devnote2/
Reported-by: Paul Cacheux <paulcacheux@gmail.com>
Closes: https://lore.kernel.org/all/20250510074456.805a16872b591e2971a4d221@kernel.org/
Fixes: ab105a4fb894 ("tracing: Use tracing error_log with probe events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Raju Rangoju says:
====================
amd-xgbe: add support for AMD Renoir
Add support for a new AMD Ethernet device called "Renoir". It has a new
PCI ID, add this to the current list of supported devices in the
amd-xgbe devices. Also, the BAR1 addresses cannot be used to access the
PCS registers on Renoir platform, use the indirect addressing via SMN
instead.
====================
Link: https://patch.msgid.link/20250509155325.720499-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for new pci device id 0x1641 to register
Renoir device with PCIe.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250509155325.720499-6-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A new version of XPCS access routines have been introduced, add the
support to xgbe_pci_probe() to use these routines.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250509155325.720499-5-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the necessary support to enable Renoir ethernet device. Since the
BAR1 address cannot be used to access the XPCS registers on Renoir, use
the smn functions.
Some of the ethernet add-in-cards have dual PHY but share a single MDIO
line (between the ports). In such cases, link inconsistencies are
noticed during the heavy traffic and during reboot stress tests. Using
smn calls helps avoid such race conditions.
Suggested-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250509155325.720499-4-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Reorganize the xgbe_pci_probe() code path to convert if/else statements
to switch case to help add future code. This helps code look cleaner.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250509155325.720499-3-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The xgbe_{read/write}_mmd_regs_v* functions have common code which can
be moved to helper functions. Add new helper functions to calculate the
mmd_address for v1/v2 of xpcs access.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250509155325.720499-2-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jakub Kicinski says:
====================
tools: ynl-gen: support sub-types for binary attributes
Binary attributes have sub-type annotations which either indicate
that the binary object should be interpreted as a raw / C array of
a simple type (e.g. u32), or that it's a struct.
Use this information in the C codegen instead of outputting void *
for all binary attrs. It doesn't make a huge difference in the genl
families, but in classic Netlink there is a lot more structs.
v1: https://lore.kernel.org/20250508022839.1256059-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250509154213.1747885-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Support using a struct pointer for binary attrs. Len field is maintained
because the structs may grow with newer kernel versions. Or, which matters
more, be shorter if the binary is built against newer uAPI than kernel
against which it's executed. Since we are storing a pointer to a struct
type - always allocate at least the amount of memory needed by the struct
per current uAPI headers (unused mem is zeroed). Technically users should
check the length field but per modern ASAN checks storing a short object
under a pointer seems like a bad idea.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250509154213.1747885-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We auto-indent if statements (increase the indent of the subsequent
line by 1), do the same thing for else branches without a block.
There hasn't been any else branches before but we're about to add one.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250509154213.1747885-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
