| Age | Commit message (Collapse) | Author |
|---|
|
Someone made a typo when they added the RTC to the Sige5 DTS, which
resulted in it using interrupts from GPIO0 B0 instead of GPIO0 A0. The
pinctrl entry for it wasn't typoed though, curiously enough.
The Sige5 v1.1 schematic was used to verify that GPIO0 A0 is the correct
pin for the RTC wakeup interrupt, so let's change it to that.
Fixes: 40f742b07ab2 ("arm64: dts: rockchip: Add rk3576-armsom-sige5 board")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250429-sige5-rtc-oopsie-v1-1-8686767d0f1f@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
If the CONFIG_NET_SCH_BPF configuration is not enabled,
the BPF test compilation will report the following error:
In file included from progs/bpf_qdisc_fq.c:39:
progs/bpf_qdisc_common.h:17:51: error: declaration of 'struct bpf_sk_buff_ptr' will not be visible outside of this function [-Werror,-Wvisibility]
17 | void bpf_qdisc_skb_drop(struct sk_buff *p, struct bpf_sk_buff_ptr *to_free) __ksym;
| ^
progs/bpf_qdisc_fq.c:309:14: error: declaration of 'struct bpf_sk_buff_ptr' will not be visible outside of this function [-Werror,-Wvisibility]
309 | struct bpf_sk_buff_ptr *to_free)
| ^
progs/bpf_qdisc_fq.c:309:14: error: declaration of 'struct bpf_sk_buff_ptr' will not be visible outside of this function [-Werror,-Wvisibility]
progs/bpf_qdisc_fq.c:308:5: error: conflicting types for '____bpf_fq_enqueue'
Fixes: 11c701639ba9 ("selftests/bpf: Add a basic fifo qdisc test")
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250428033445.58113-1-yangfeng59949@163.com
|
|
When libperf is built alone in-source, $(OUTPUT) isn't set. This causes
the generated uapi path to resolve to '/../arch' which results in a
permissions error:
mkdir: cannot create directory '/../arch': Permission denied
Fix it by removing the preceding '/..' which means that it gets
generated either in the tools/lib/perf part of the tree or the OUTPUT
folder. Some other rules that rely on OUTPUT further refine this
conditionally depending on whether it's an in-source or out-of-source
build, but I don't think we need the extra complexity here. And this
rule is slightly different to others because the header is needed by
both libperf and Perf. This is further complicated by the fact that Perf
always passes O=... to libperf even for in source builds, meaning that
OUTPUT isn't set consistently between projects.
Because we're no longer going one level up to try to generate the file
in the tools/ folder, Perf's include rule needs to descend into libperf.
Also fix the clean rule while we're here.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/linux-perf-users/7703f88e-ccb7-4c98-9da4-8aad224e780f@leemhuis.info/
Fixes: bfb713ea53c7 ("perf tools: Fix arm64 build by generating unistd_64.h")
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/20250429-james-perf-fix-libperf-in-source-build-v1-1-a1a827ac15e5@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
This bit is necessary to receive packets from the internal PHY.
Without this bit set, no activity occurs on the interface.
Normally u-boot sets this bit, but if u-boot is compiled without
net support, the interface will be up but without any activity.
If bit is set once, it will work until the IP is powered down or reset.
The vendor SDK sets this bit along with the PHY_ID bits.
Signed-off-by: Da Xue <da@libre.computer>
Fixes: 9a24e1ff4326 ("net: mdio: add amlogic gxl mdio mux support")
Link: https://patch.msgid.link/20250425192009.1439508-1-da@libre.computer
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As it's name suggests, parse_eeprom() parses EEPROM data.
This is done by reading data, 16 bits at a time as follows:
for (i = 0; i < 128; i++)
((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom(np, i));
sromdata is at the same memory location as psrom.
And the type of psrom is a pointer to struct t_SROM.
As can be seen in the loop above, data is stored in sromdata, and thus psrom,
as 16-bit little-endian values.
However, the integer fields of t_SROM are host byte order integers.
And in the case of led_mode this leads to a little endian value
being incorrectly treated as host byte order.
Looking at rio_set_led_mode, this does appear to be a bug as that code
masks led_mode with 0x1, 0x2 and 0x8. Logic that would be effected by a
reversed byte order.
This problem would only manifest on big endian hosts.
Found by inspection while investigating a sparse warning
regarding the crc field of t_SROM.
I believe that warning is a false positive. And although I plan
to send a follow-up to use little-endian types for other the integer
fields of PSROM_t I do not believe that will involve any bug fixes.
Compile tested only.
Fixes: c3f45d322cbd ("dl2k: Add support for IP1000A-based cards")
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250425-dlink-led-mode-v1-1-6bae3c36e736@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MIDI substream name string is constructed from the combination of
the card shortname (which is taken from USB iProduct) and the USB
iJack. The problem is that some devices put the product name to the
iJack field, too. For example, aplaymidi -l output on the Lanchkey MK
49 are like:
% aplaymidi -l
Port Client name Port name
44:0 Launchkey MK4 49 Launchkey MK4 49 Launchkey MK4
44:1 Launchkey MK4 49 Launchkey MK4 49 Launchkey MK4
where the actual iJack name can't be seen because it's truncated due
to the doubly words.
For resolving those situations, this patch compares the iJack string
with the card shortname, and drops if both start with the same words.
Then the result becomes like:
% aplaymidi -l
Port Client name Port name
40:0 Launchkey MK4 49 Launchkey MK4 49 MIDI In
40:1 Launchkey MK4 49 Launchkey MK4 49 DAW In
A caveat is that there are some pre-defined names for certain
devices in the driver code, and this workaround shouldn't be applied
to them. Similarly, when the iJack isn't specified, we should skip
this check, too. The patch added those checks in addition to the
string comparison.
Suggested-by: Paul Davis <paul@linuxaudiosystems.com>
Tested-by: Paul Davis <paul@linuxaudiosystems.com>
Link: https://lore.kernel.org/CAFa_cKmEDQWcJatbYWi6A58Zg4Ma9_6Nr3k5LhqwyxC-P_kXtw@mail.gmail.com
Link: https://patch.msgid.link/20250429183626.20773-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recent patch to make the rfc3961 simplified code use sg_miter rather
than manually walking the scatterlist to hash the contents of a buffer
described by that scatterlist failed to take the starting offset into
account.
This is indicated by the selftests reporting:
krb5: Running aes128-cts-hmac-sha256-128 mic
krb5: !!! TESTFAIL crypto/krb5/selftest.c:446
krb5: MIC mismatch
Fix this by calling sg_miter_skip() before doing the loop to advance
by the offset.
This only affects packet signing modes and not full encryption in RxGK
because, for full encryption, the message digest is handled inside the
authenc and krb5enc drivers.
Note: Nothing in linus/master uses the krb5lib, though the bug is there.
It is used by AF_RXRPC's RxGK implementation in -next, no need to backport.
Fixes: da6f9bf40ac2 ("crypto: krb5 - Use SG miter instead of doing it by hand")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/3824017.1745835726@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The defines for SUPPORTED_INTERFACES and ADVERTISED_INTERFACES both appear
to be unused. I couldn't find anything that actually references them in the
original diff that added them and it seems like they have persisted despite
using deprecated defines that aren't supposed to be used as per the
ethtool.h header that defines the bits they are composed of.
Since they are unused, and not supposed to be used anymore I am just
dropping the lines of code since they seem to just be occupying space.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/174578398922.1580647.9720643128205980455.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fix from Jan Kara:
"A fix for the recently merged mount notification support"
* tag 'fsnotify_for_v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
selftests/fs/mount-notify: test also remove/flush of mntns marks
fanotify: fix flush of mntns marks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Fixes and new HW support
- amd/pmc: Require at least 2.5 seconds between HW sleep cycles
- alienware-wmi-wmax:
- Add support for Alienware m15 R7
- Fix error handling to avoid uninitialized variable
- asus-wmi: Disable OOBE state also on resume
- ideapad-laptop: Support a few new buttons
- intel/hid: Add Panther Lake support
- intel-uncore-freq: Fix missing uncore sysfs during CPU hotplug"
* tag 'platform-drivers-x86-v6.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ideapad-laptop: add support for some new buttons
platform/x86: asus-wmi: Disable OOBE state after resume from hibernation
platform/x86: alienware-wmi-wmax: Add support for Alienware m15 R7
platform/x86/intel: hid: Add Pantherlake support
platform/x86: alienware-wmi-wmax: Fix uninitialized variable due to bad error handling
platform/x86/intel-uncore-freq: Fix missing uncore sysfs during CPU hotplug
platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Fixes for nid setting in memmap_init_reserved_pages():
- pass 'size' rather than 'end' to memblock_set_node() as that
function expects
- fix a corner case when memblock.reserved is doubled at
memmap_init_reserved_pages() and the newly reserved block
won't have nid assigned"
* tag 'fixes-2025-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: add test for memblock_set_node
mm/memblock: repeat setting reserved region nid if array is doubled
mm/memblock: pass size instead of end to memblock_set_node()
|
|
David Wei says:
====================
io_uring/zcrx: selftests: more cleanups
Patch 1 use rand_port() instead of hard coding port 9999. Patch 2 parses
JSON from ethtool -g instead of string.
====================
Link: https://patch.msgid.link/20250426195525.1906774-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Parse JSON from ethtool -g instead of parsing text output.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250426195525.1906774-3-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use rand_port() and stop hard coding port 9999.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250426195525.1906774-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ops.cpu_online() and ops.cpu_offline() callbacks incorrectly assume
that the rq involved in the operation is locked, which is not the case
during hotplug, triggering the following warning:
WARNING: CPU: 1 PID: 20 at kernel/sched/sched.h:1504 handle_hotplug+0x280/0x340
Fix by not tracking the target rq as locked in the context of
ops.cpu_online() and ops.cpu_offline().
Fixes: 18853ba782bef ("sched_ext: Track currently locked rq")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Tested-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "const struct attribute_group **", but the returned
type, while technically matching, will be not const qualified. As there is
no general way to safely add const qualifiers, adjust the allocation type
to match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250426061858.work.470-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type "struct xsk_buff_pool **", but the returned type will be
"struct xsk_buff_pool ***". These are the same allocation size (pointer
size), but the types don't match. Adjust the allocation type to match
the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250426060841.work.016-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "unsigned long **", but the returned type will be
"long **". These are the same size allocation (pointer size) but the
types do not match. Adjust the allocation type to match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250426060757.work.865-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
This is allocating a copy of pdsc_viftype_defaults, which is an array of
struct pdsc_viftype. To correctly return "struct pdsc_viftype *" in the
future, adjust the allocation to allocating ARRAY_SIZE-many entries. The
resulting allocation size is the same.
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20250426060712.work.575-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
This was allocating many sizeof(struct hlist_head *) when it actually
wanted sizeof(struct hlist_head). Luckily these are the same size.
Adjust the allocation type to match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250426060529.work.873-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mtk_pmic_keys_probe, the regs parameter is only set if the button is
parsed in the device tree. However, on hardware where the button is left
floating, that node will most likely be removed not to enable that
input. In that case the code will try to dereference a null pointer.
Let's use the regs struct instead as it is defined for all supported
platforms. Note that it is ok setting the key reg even if that latter is
disabled as the interrupt won't be enabled anyway.
Fixes: b581acb49aec ("Input: mtk-pmic-keys - transfer per-key bit in mtk_pmic_keys_regs")
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
stm32mp23 SoCs
Adjust the size of 8kB GIC regions to 128kB so that each 4kB is mapped 16
times over a 64kB region.
The offset is then adjusted in the irq-gic driver.
see commit 12e14066f4835 ("irqchip/GIC: Add workaround for aliased GIC400")
Fixes: e9b03ef21386e ("arm64: dts: st: introduce stm32mp23 SoCs family")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Link: https://lore.kernel.org/r/20250415111654.2103767-7-christian.bruel@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use gic-400 compatible and remove address-cells = <1> for aarch64
Fixes: e9b03ef21386e ("arm64: dts: st: introduce stm32mp23 SoCs family")
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Link: https://lore.kernel.org/r/20250415111654.2103767-6-christian.bruel@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
stm32mp21 SoCs
Adjust the size of 8kB GIC regions to 128kB so that each 4kB is mapped
16 times over a 64kB region.
The offset is then adjusted in the irq-gic driver.
see commit 12e14066f4835 ("irqchip/GIC: Add workaround for aliased GIC400")
Fixes: 7a57b1bb1afbf ("arm64: dts: st: introduce stm32mp21 SoCs family")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Link: https://lore.kernel.org/r/20250415111654.2103767-5-christian.bruel@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use gic-400 compatible for aarch64
Fixes: 7a57b1bb1afbf ("arm64: dts: st: introduce stm32mp21 SoCs family")
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Link: https://lore.kernel.org/r/20250415111654.2103767-4-christian.bruel@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
stm32mp25 SoCs
Adjust the size of 8kB GIC regions to 128kB so that each 4kB is mapped 16
times over a 64kB region.
The offset is then adjusted in the irq-gic driver.
see commit 12e14066f4835 ("irqchip/GIC: Add workaround for aliased GIC400")
Fixes: 5d30d03aaf785 ("arm64: dts: st: introduce stm32mp25 SoCs family")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250415111654.2103767-3-christian.bruel@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use gic-400 compatible and remove address-cells = <1> on aarch64
Fixes: 5d30d03aaf785 ("arm64: dts: st: introduce stm32mp25 SoCs family")
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Link: https://lore.kernel.org/r/20250415111654.2103767-2-christian.bruel@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.15:
- An i.MX8MP change from Ahmad Fatoum to fix the broken nominal device
tree caused by commit 9f7595b3e5ae ("arm64: dts: imx8mp: configure
GPU and NPU clocks to overdrive rate")
- A MAINTAINERS update from Michael Riesch to exclude Sony IMX image
sensor drivers from i.MX entry
- A i.MX95 device tree change from Richard Zhu to correct the range of
PCIe app-reg region
- An opos6ul device tree change from Sébastien Szymanski to fix
an Ethernet regression caused by commit c7e73b5051d6 ("ARM: imx:
mach-imx6ul: remove 14x14 EVK specific PHY fixup")
- An imx8mm-verdin device tree change from Wojciech Dubowik to fix
a SD card regression caused by commit f5aab0438ef1 ("regulator:
pca9450: Fix enable register for LDO5")
* tag 'imx-fixes-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mm-verdin: Link reg_usdhc2_vqmmc to usdhc2
MAINTAINERS: add exclude for dt-bindings to imx entry
ARM: dts: opos6ul: add ksz8081 phy properties
arm64: dts: imx95: Correct the range of PCIe app-reg region
arm64: dts: imx8mp: configure GPU and NPU clocks in nominal DTSI
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Armv8 Morello fix for v6.15
Just a single fix addressing the cache node inconsistencies. It removed
unnecessary CPU number from L2 cache node names since they are local to
CPU nodes and should simply be named "l2-cache" and relocates the shared
L3 cache node from under cpu@0/l2-cache to the /cpus node, which is the
standard location for shared caches.
* tag 'juno-fix-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: morello: Fix-up cache nodes
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.15
A fix that addresses incorrect release of Rx buffer ownership in the
driver. The fix specificially avoids releasing Rx buffer ownership with
FFA_RX_RELEASE if it wasn’t acquired during a FFA_PARTITION_INFO_GET call
that only requested the partition count. This prevents unnecessary errors
like FFA_RET_DENIED from firmware when buffers are not actually owned by
the driver.
* tag 'ffa-fix-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Skip Rx buffer ownership release if not acquired
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.15
Couple of fixes addressing issues with timeout in the polling path
and device reference count imbalance detected by kmemleak.
1. The change fixes a timeout issue in the polling path of SCMI transactions
where false positives could occur if the polling thread was pre-empted,
causing it to appear as though a timeout occurred when it hadn't. The fix
ensures that the polling result is verified before reporting a timeout,
accounting for potential pre-emption or out-of-order replies.
2. It also corrects a device reference count imbalance caused by
device_find_child() during device destruction, which prevented proper
cleanup and triggered memory leaks detected by KMemleak.
* tag 'scmi-fixes-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix timeout checks on polling path
firmware: arm_scmi: Balance device refcount when destroying devices
|
|
On r6x2b6x2g6x2 displays not enough blank data is sent to blank the
entire screen. When support for these displays was added, the dirty
function was updated to handle the different amount of data, but
blanking was not, and remained hardcoded as 2 bytes per pixel.
This change applies almost the same algorithm used in the dirty function
to the blank function, but there is no fb available at that point, and
no concern about having to transform any data, so the dbidev pixel
format is always used for calculating the length.
Fixes: 4aebb79021f3 ("drm/mipi-dbi: Add support for DRM_FORMAT_RGB888")
Signed-off-by: Russell Cloran <rcloran@gmail.com>
Link: https://lore.kernel.org/r/20250415053259.79572-1-rcloran@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The drm_gem_shmem_test_get_pages_sgt() gets a scatter-gather table using
the drm_gem_shmem_get_sg_table() function and rightfully calls
sg_free_table() on it. However, it's also supposed to kfree() the
returned sg_table, but doesn't.
This leads to a memory leak, reported by kmemleak. Fix it by adding a
kunit action to kfree the sgt when the test ends.
Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: 93032ae634d4 ("drm/test: add a test suite for GEM objects backed by shmem")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250408140758.1831333-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
amd_hsmp and hsmp_acpi are intended to be mutually exclusive drivers and
amd_hsmp is for legacy platforms. To achieve this, it is essential to
check for the presence of the ACPI device in plat.c. If the hsmp ACPI
device entry is found, allow the hsmp_acpi driver to manage the hsmp
and return an error from plat.c.
Additionally, rename the driver from amd_hsmp to hsmp_acpi to prevent
"Driver 'amd_hsmp' is already registered, aborting..." error in case
both drivers are loaded simultaneously.
Also, support both platform device based and ACPI based probing for
family 0x1A models 0x00 to 0x0F, implement only ACPI based probing
for family 0x1A, models 0x10 to 0x1F. Return false from
legacy_hsmp_support() for this platform.
This aligns with the condition check in is_f1a_m0h().
Link: https://lore.kernel.org/platform-driver-x86/aALZxvHWmphNL1wa@gourry-fedora-PF4VCD3F/
Fixes: 7d3135d16356 ("platform/x86/amd/hsmp: Create separate ACPI, plat and common drivers")
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Co-developed-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Link: https://lore.kernel.org/r/20250425102357.266790-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
commit 376a8c2a14439 ("platform/x86/amd/pmf: Update PMF Driver for
Compatibility with new PMF-TA") added support for platforms that support
an updated TA, however it also exposed a number of platforms that although
they have support for the updated TA don't actually populate a policy
binary.
Add an explicit check that the policy binary isn't empty before
initializing the TA.
Reported-by: Christian Heusel <christian@heusel.eu>
Closes: https://lore.kernel.org/platform-driver-x86/ae644428-5bf2-4b30-81ba-0b259ed3449b@heusel.eu/
Fixes: 376a8c2a14439 ("platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Christian Heusel <christian@heusel.eu>
Link: https://lore.kernel.org/r/20250423132002.3984997-3-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If a policy is passed into amd_pmf_get_pb_data() that causes the engine
to fail to start there is a memory leak. Free the memory in this failure
path.
Fixes: 10817f28e5337 ("platform/x86/amd/pmf: Add capability to sideload of policy binary")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250423132002.3984997-2-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Willem de Bruijn says:
====================
ip: improve tcp sock multipath routing
From: Willem de Bruijn <willemb@google.com>
Improve layer 4 multipath hash policy for local tcp connections:
patch 1: Select a source address that matches the nexthop device.
Due to tcp_v4_connect making separate route lookups for saddr
and route, the two can currently be inconsistent.
patch 2: Use all paths when opening multiple local tcp connections to
the same ip address and port.
patch 3: Test the behavior. Extend the fib_tests.sh testsuite with one
opening many connections, and count SYNs on both egress
devices, for packets matching the source address of the dev.
Changelog in the individual patches
====================
Link: https://patch.msgid.link/20250424143549.669426-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Verify that TCP connections use both routes when connecting multiple
times to a remote service over a two nexthop multipath route.
Use socat to create the connections. Use tc prio + tc filter to
count routes taken, counting SYN packets across the two egress
devices. Also verify that the saddr matches that of the device.
To avoid flaky tests when testing inherently randomized behavior,
set a low bar and pass if even a single SYN is observed on each
device.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250424143549.669426-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Load balance new TCP connections across nexthops also when they
connect to the same service at a single remote address and port.
This affects only port-based multipath hashing:
fib_multipath_hash_policy 1 or 3.
Local connections must choose both a source address and port when
connecting to a remote service, in ip_route_connect. This
"chicken-and-egg problem" (commit 2d7192d6cbab ("ipv4: Sanitize and
simplify ip_route_{connect,newports}()")) is resolved by first
selecting a source address, by looking up a route using the zero
wildcard source port and address.
As a result multiple connections to the same destination address and
port have no entropy in fib_multipath_hash.
This is not a problem when forwarding, as skb-based hashing has a
4-tuple. Nor when establishing UDP connections, as autobind there
selects a port before reaching ip_route_connect.
Load balance also TCP, by using a random port in fib_multipath_hash.
Port assignment in inet_hash_connect is not atomic with
ip_route_connect. Thus ports are unpredictable, effectively random.
Implementation details:
Do not actually pass a random fl4_sport, as that affects not only
hashing, but routing more broadly, and can match a source port based
policy route, which existing wildcard port 0 will not. Instead,
define a new wildcard flowi flag that is used only for hashing.
Selecting a random source is equivalent to just selecting a random
hash entirely. But for code clarity, follow the normal 4-tuple hash
process and only update this field.
fib_multipath_hash can be reached with zero sport from other code
paths, so explicitly pass this flowi flag, rather than trying to infer
this case in the function itself.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250424143549.669426-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With multipath routes, try to ensure that packets leave on the device
that is associated with the source address.
Avoid the following tcpdump example:
veth0 Out IP 10.1.0.2.38640 > 10.2.0.3.8000: Flags [S]
veth1 Out IP 10.1.0.2.38648 > 10.2.0.3.8000: Flags [S]
Which can happen easily with the most straightforward setup:
ip addr add 10.0.0.1/24 dev veth0
ip addr add 10.1.0.1/24 dev veth1
ip route add 10.2.0.3 nexthop via 10.0.0.2 dev veth0 \
nexthop via 10.1.0.2 dev veth1
This is apparently considered WAI, based on the comment in
ip_route_output_key_hash_rcu:
* 2. Moreover, we are allowed to send packets with saddr
* of another iface. --ANK
It may be ok for some uses of multipath, but not all. For instance,
when using two ISPs, a router may drop packets with unknown source.
The behavior occurs because tcp_v4_connect makes three route
lookups when establishing a connection:
1. ip_route_connect calls to select a source address, with saddr zero.
2. ip_route_connect calls again now that saddr and daddr are known.
3. ip_route_newports calls again after a source port is also chosen.
With a route with multiple nexthops, each lookup may make a different
choice depending on available entropy to fib_select_multipath. So it
is possible for 1 to select the saddr from the first entry, but 3 to
select the second entry. Leading to the above situation.
Address this by preferring a match that matches the flowi4 saddr. This
will make 2 and 3 make the same choice as 1. Continue to update the
backup choice until a choice that matches saddr is found.
Do this in fib_select_multipath itself, rather than passing an fl4_oif
constraint, to avoid changing non-multipath route selection. Commit
e6b45241c57a ("ipv4: reset flowi parameters on route connect") shows
how that may cause regressions.
Also read ipv4.sysctl_fib_multipath_use_neigh only once. No need to
refresh in the loop.
This does not happen in IPv6, which performs only one lookup.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250424143549.669426-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add two quirks for the WDC Blue SN550 (PCI ID 15b7:5009) based on user
reports and hardware analysis:
- NVME_QUIRK_NO_DEEPEST_PS:
liaozw talked to me the problem and solved with
nvme_core.default_ps_max_latency_us=0, so add the quirk.
I also found some reports in the following link.
- NVME_QUIRK_BROKEN_MSI:
after get the lspci from Jack Rio.
I think that the disk also have NVME_QUIRK_BROKEN_MSI.
described in commit d5887dc6b6c0 ("nvme-pci: Add quirk for broken MSIs")
as sean said in link which match the MSI 1/32 and MSI-X 17.
Log:
lspci -nn | grep -i memory
03:00.0 Non-Volatile memory controller [0108]: Sandisk Corp SanDisk Ultra 3D / WD PC SN530, IX SN530, Blue SN550 NVMe SSD (DRAM-less) [15b7:5009] (rev 01)
lspci -v -d 15b7:5009
03:00.0 Non-Volatile memory controller: Sandisk Corp SanDisk Ultra 3D / WD PC SN530, IX SN530, Blue SN550 NVMe SSD (DRAM-less) (rev 01) (prog-if 02 [NVM Express])
Subsystem: Sandisk Corp WD Blue SN550 NVMe SSD
Flags: bus master, fast devsel, latency 0, IRQ 35, IOMMU group 10
Memory at fe800000 (64-bit, non-prefetchable) [size=16K]
Memory at fe804000 (64-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [b0] MSI-X: Enable+ Count=17 Masked-
Capabilities: [c0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [1b8] Latency Tolerance Reporting
Capabilities: [300] Secondary PCI Express
Capabilities: [900] L1 PM Substates
Kernel driver in use: nvme
dmesg | grep nvme
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.12.20-amd64-desktop-rolling root=UUID= ro splash quiet nvme_core.default_ps_max_latency_us=0 DEEPIN_GFXMODE=
[ 0.059301] Kernel command line: BOOT_IMAGE=/vmlinuz-6.12.20-amd64-desktop-rolling root=UUID= ro splash quiet nvme_core.default_ps_max_latency_us=0 DEEPIN_GFXMODE=
[ 0.542430] nvme nvme0: pci function 0000:03:00.0
[ 0.560426] nvme nvme0: allocated 32 MiB host memory buffer.
[ 0.562491] nvme nvme0: 16/0/0 default/read/poll queues
[ 0.567764] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 6.388726] EXT4-fs (nvme0n1p7): mounted filesystem ro with ordered data mode. Quota mode: none.
[ 6.893421] EXT4-fs (nvme0n1p7): re-mounted r/w. Quota mode: none.
[ 7.125419] Adding 16777212k swap on /dev/nvme0n1p8. Priority:-2 extents:1 across:16777212k SS
[ 7.157588] EXT4-fs (nvme0n1p6): mounted filesystem r/w with ordered data mode. Quota mode: none.
[ 7.165021] EXT4-fs (nvme0n1p9): mounted filesystem r/w with ordered data mode. Quota mode: none.
[ 8.036932] nvme nvme0: using unchecked data buffer
[ 8.096023] block nvme0n1: No UUID available providing old NGUID
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d5887dc6b6c054d0da3cd053afc15b7be1f45ff6
Link: https://lore.kernel.org/all/20240422162822.3539156-1-sean.anderson@linux.dev/
Reported-by: liaozw <hedgehog-002@163.com>
Closes: https://bbs.deepin.org.cn/post/286300
Reported-by: rugk <rugk+github@posteo.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=208123
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This commit adds NVME_QUIRK_NO_DEEPEST_PS and NVME_QUIRK_BOGUS_NID for
device [126f:1001].
It is similar to commit e89086c43f05 ("drivers/nvme: Add quirks for
device 126f:2262")
Diff is according the dmesg, use NVME_QUIRK_IGNORE_DEV_SUBNQN.
dmesg | grep -i nvme0:
nvme nvme0: pci function 0000:01:00.0
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: 12/0/0 default/read/poll queues
Link:https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e89086c43f0500bc7c4ce225495b73b8ce234c1f
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
A zero return means the reset was successfully scheduled. We don't want
to unquiesce the queues while the reset_work is pending, as that will
just flush out requeued requests to a failed completion.
Fixes: 71a5bb153be104 ("nvme: ensure disabling pairs with unquiesce")
Reported-by: Dhankaran Singh Ajravat <dhankaran@meta.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The conversion function from MIDI 1.0 to UMP packet contains an
internal buffer to keep the incoming MIDI bytes, and its size is 4, as
it was supposed to be the max size for a MIDI1 UMP packet data.
However, the implementation overlooked that SysEx is handled in a
different format, and it can be up to 6 bytes, as found in
do_convert_to_ump(). It leads eventually to a buffer overflow, and
may corrupt the memory when a longer SysEx message is received.
The fix is simply to extend the buffer size to 6 to fit with the SysEx
UMP message.
Fixes: 0b5288f5fe63 ("ALSA: ump: Add legacy raw MIDI support")
Reported-by: Argusee <vr@darknavy.com>
Link: https://patch.msgid.link/20250429124845.25128-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
__ublk_check_and_get_req() is only called from ublk_check_and_get_req()
and ublk_register_io_buf(), the same check has been covered in the two
calling sites.
So remove the check from __ublk_check_and_get_req().
Suggested-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429022941.1718671-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The simple check of UBLK_IO_FLAG_OWNED_BY_SRV can avoid incorrect
register/unregister io buffer easily, so check it before calling
starting to register/un-register io buffer.
Also only allow io buffer register/unregister uring_cmd in case of
UBLK_F_SUPPORT_ZERO_COPY.
Also mark argument 'ublk_queue *' of ublk_register_io_buf as const.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 1f6540e2aabb ("ublk: zc register/unregister bvec")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429022941.1718671-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBLK_F_USER_COPY and UBLK_F_SUPPORT_ZERO_COPY are two different
features, and shouldn't be coupled together.
Commit 1f6540e2aabb ("ublk: zc register/unregister bvec") enables
user copy automatically in case of UBLK_F_SUPPORT_ZERO_COPY, this way
isn't correct.
So decouple zero copy from user copy, and use independent helper to
check each one.
Fixes: 1f6540e2aabb ("ublk: zc register/unregister bvec")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429022941.1718671-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 57e13a2e8cd2 ("selftests: ublk: support user recovery") starts to
support UBLK_F_NEED_GET_DATA for covering recovery feature, however the
ublk utility implementation isn't done correctly.
Fix it by supporting UBLK_F_NEED_GET_DATA correctly.
Also add test generic_07 for covering UBLK_F_NEED_GET_DATA.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 57e13a2e8cd2 ("selftests: ublk: support user recovery")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429022941.1718671-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
On newer SoCs intr_target_bit position is at 8 instead of 5. Fix it.
Also add missing intr_wakeup_present_bit and intr_wakeup_enable_bit which
enables forwarding of GPIO interrupts to parent PDC interrupt controller.
Fixes: afe9803e3b82 ("pinctrl: qcom: Add sm8750 pinctrl driver")
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/20250429-pinctrl_sm8750-v2-1-87d45dd3bd82@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Deferred probe with pm_runtime_put() may delay clock disable, causing
incorrect clock usage count. Use pm_runtime_put_sync() to ensure the
clock is disabled immediately.
Fixes: 13d6eb20fc79 ("i2c: imx-lpi2c: add runtime pm support")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Cc: <stable@vger.kernel.org> # v4.16+
Link: https://lore.kernel.org/r/20250421062341.2471922-1-carlos.song@nxp.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
