summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-05-26Documentation/accounting/getdelays.c: fix unused var warningJustin P. Mattock
Fixes Documentation/accounting/getdelays.c: In function `main': Documentation/accounting/getdelays.c:436:7: warning: variable `i' set but not used [-Wunused-but-set-variable] Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26Documentation/atomic_ops.txt: avoid volatile in sample codeNikanth Karthikesan
As declaring counter as volatile is discouraged, it is best not to use it in sample code as well. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26ufs: fix truncated values handling 64 bit metadataDan Carpenter
Originally i_lastfrag was 32 bits but then we added support for handling 64 bit metadata and it became a 64 bit variable. That was during 2007, in 54fb996ac15c "[PATCH] ufs2 write: block allocation update". Unfortunately these casts got left behind so the value got truncated to 32 bit again. [akpm@linux-foundation.org: remove now-unneeded min_t/max_t casting] Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26drivers/rtc/rtc-mxc.c: remove defines already included in rtc.hWolfram Sang
[akpm@linux-foundation.org: retain the code comments] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26drivers/rtc/rtc-pcf50633.c: don't request update IRQLars-Peter Clausen
Commit 51ba60c5 ("RTC: Cleanup rtc_class_ops->update_irq_enable()") removed the only user of the update IRQ, so there is no need to manage it any more. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26rtc: add support for spear rtcRajeev Kumar
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26drivers/rtc/rtc-mrst.c: use release_mem_region after request_mem_regionJulia Lawall
The memory allocated using request_mem_region should be released using release_mem_region, not release_region. The semantic patch that fixes part of this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E1,E2,E3; @@ request_mem_region(E1,E2,E3) ... ?- release_region(E1,E2) + release_mem_region(E1,E2) // </smpl> [akpm@linux-foundation.org: use resource_size()] Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26rtc: add basic support for ST M41T93 SPI RTCVoss, Nikolaus
Add basic support for ST m41t93 SPI RTCs. Tested with factory-new and with "run-in" species with and without backup batteries. Signed-off-by: Nikolaus Voss <n.voss@weinmann.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26rtc: add rv3029c2 RTC supportHeiko Schocher
Add support for the Micro Crystal RV3029-C2 RTC chips. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26rtc: add EM3027 rtc driverMike Rapoport
Add support for EM Microelectronic EM3027 RTC chip. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26rtc: add support for the RTC in VIA VT8500 and compatiblesAlexey Charkov
This adds a driver for the RTC devices in VIA and WonderMedia Systems-on-Chip. Alarm, 1Hz interrupts, reading and setting time are supported. Signed-off-by: Alexey Charkov <alchark@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Alexey Charkov <alchark@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26flex_array: avoid divisions when accessing elementsJesse Gross
On most architectures division is an expensive operation and accessing an element currently requires four of them. This performance penalty effectively precludes flex arrays from being used on any kind of fast path. However, two of these divisions can be handled at creation time and the others can be replaced by a reciprocal divide, completely avoiding real divisions on access. [eparis@redhat.com: rebase on top of changes to support 0 len elements] [eparis@redhat.com: initialize part_nr when array fits entirely in base] Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Eric Paris <eparis@redhat.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26m32r: remove redundant declarationKOSAKI Motohiro
They have no meaning. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26m32r: fix spin_lock_irqsave() misuseKOSAKI Motohiro
spin_lock_irqsave() requires unsigned long. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26m32r: convert cpumask apiKOSAKI Motohiro
We plan to remove cpus_xx() old cpumask APIs later. Also, we plan to change mm_cpu_mask() implementation, allocate only nr_cpu_ids, thus *mm_cpu_mask() is dangerous operation. Then, this patch convert them. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26drivers/bcma/host_pci.c needs slab.hAndrew Morton
alpha allmodconfig: drivers/bcma/host_pci.c: In function 'bcma_host_pci_probe': drivers/bcma/host_pci.c:102: error: implicit declaration of function 'kzalloc' drivers/bcma/host_pci.c:102: warning: assignment makes pointer from integer without a cast Cc: <zajec5@gmail.com> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26drivers/video/mb862xx/mb862xxfbdrv.c needs uaccess.hAndrew Morton
alpha allmodconfig: drivers/video/mb862xx/mb862xxfbdrv.c: In function 'mb862xxfb_ioctl': drivers/video/mb862xx/mb862xxfbdrv.c:323: error: implicit declaration of function 'copy_to_user' drivers/video/mb862xx/mb862xxfbdrv.c:327: error: implicit declaration of function 'copy_from_user' Cc: Paul Mundt <lethal@linux-sh.org> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26x86: poll waiting for I/OAT DMA channel statusDimitri Sivanich
For certain system configurations a 5 usec udelay before checking I/OAT DMA channel status is sometimes not sufficient, resulting in a false failure status and unnecessary freeing of channel resources. Conversely, for many configurations 5 usec is longer than necessary. Loop for up to 20 usec waiting for successful status before failing. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-05-26maintainers: add dma engine tree detailsVinod Koul
Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-05-27Merge remote branch 'kumar/merge' into mergeBenjamin Herrenschmidt
2011-05-26gpio: Move the s5pc100 GPIO to drivers/gpioKyungmin Park
Move the Samsung s5pc100 SoC GPIO driver to drivers/gpio Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio: Move the s5pv210 GPIO to drivers/gpioKyungmin Park
Move the Samsung s5pv210 SoC GPIO driver to drivers/gpio Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio: Move the exynos4 GPIO to drivers/gpioKyungmin Park
Move the Samsung Exynos4 series SoCs GPIO driver to drivers/gpio Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio: Move to Samsung common GPIO library to drivers/gpioKyungmin Park
It's common gpiolib for recent Samsung SoCs. Move to drivers/gpio Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio/nomadik: add function to read GPIO pull down statusRickard Andersson
Signed-off-by: Rickard Andersson <rickard.andersson@stericsson.com> Reviewed-by: Martin Persson <martin.persson@stericsson.com> [Split off from larger patch] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio/nomadik: show all pins in debugRabin Vincent
Useful to check the status of the runtime pin muxing. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> [Squashed, modified to use chip-internal IRQ trigger state] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio: move Nomadik GPIO driver to drivers/gpioGrant Likely
This moves the Nomadik GPIO driver out of arch/arm/plat-nomadik and into the desired location indicated by the subsystem maintainer. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [grant.likely: squashed with kconfig fixup] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio: move U300 GPIO driver to drivers/gpioLinus Walleij
This moves the U300 GPIO driver out of arch/arm/mach-u300 and into the desired location indicated by the subsystem maintainer. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26Intel xhci: Add PCI id for Panther Point xHCI host.Sarah Sharp
This adds the PCI ID for the xHCI (USB 3.0) host controller in the Intel Panther Point chipset. It will be used by both the EHCI and xHCI driver in the following patches. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-05-27PM: Fix PM QOS's user mode interface to work with ASCII inputRafael J. Wysocki
Make pm_qos_power_write() accept values passed to it in the ASCII hex format either with or without an ending newline. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Mark Gross <markgross@thegnar.org>
2011-05-26Btrfs: setup free ino caching in a more asynchronous wayLi Zefan
For a filesystem that has lots of files in it, the first time we mount it with free ino caching support, it can take quite a long time to setup the caching before we can create new files. Here we fill the cache with [highest_ino, BTRFS_LAST_FREE_OBJECTID] before we start the caching thread to search through the extent tree. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-26btrfs scrub: don't coalesce pages that are logically discontiguousArne Jansen
scrub_page collects several pages into one bio as long as they are physically contiguous. As we only save one logical address for the whole bio, don't collect pages that are physically contiguous but logically discontiguous. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-26Btrfs: return -ENOMEM in clear_extent_bitChris Mason
The btrfs releasepage function depends on ENOMEM coming back when it is called atomic. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-26Btrfs: add mount -o auto_defragChris Mason
This will detect small random writes into files and queue the up for an auto defrag process. It isn't well suited to database workloads yet, but works for smaller files such as rpm, sqlite or bdb databases. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-26dmaengine: add TODO items for future work on dma driversVinod Koul
Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-05-26selinux: fix case of names with whitespace/multibytes on /selinux/createKohei Kaigai
I submit the patch again, according to patch submission convension. This patch enables to accept percent-encoded object names as forth argument of /selinux/create interface to avoid possible bugs when we give an object name including whitespace or multibutes. E.g) if and when a userspace object manager tries to create a new object named as "resolve.conf but fake", it shall give this name as the forth argument of the /selinux/create. But sscanf() logic in kernel space fetches only the part earlier than the first whitespace. In this case, selinux may unexpectedly answer a default security context configured to "resolve.conf", but it is bug. Although I could not test this patch on named TYPE_TRANSITION rules actually, But debug printk() message seems to me the logic works correctly. I assume the libselinux provides an interface to apply this logic transparently, so nothing shall not be changed from the viewpoint of application. Signed-off-by: KaiGai Kohei <kohei.kaigai@emea.nec.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2011-05-26Merge commit 'v2.6.39' into 20110526Eric Paris
Conflicts: lib/flex_array.c security/selinux/avc.c security/selinux/hooks.c security/selinux/ss/policydb.c security/smack/smack_lsm.c
2011-05-26Set cred->user_ns in key_replace_session_keyringSerge E. Hallyn
Since this cred was not created with copy_creds(), it needs to get initialized. Otherwise use of syscall(__NR_keyctl, KEYCTL_SESSION_TO_PARENT); can lead to a NULL deref. Thanks to Robert for finding this. But introduced by commit 47a150edc2a ("Cache user_ns in struct cred"). Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> Reported-by: Robert Święcki <robert@swiecki.net> Cc: David Howells <dhowells@redhat.com> Cc: stable@kernel.org (2.6.39) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26langwell_gpio: add runtime pm supportKristen Carlson Accardi
While this is essentially a no-op for this driver, it has the side effect of letting the PMU driver snoop D3 requests from the PCI core for this driver. This is only for langwell, not for whitney point. Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26Merge branch 'trivial' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: gfs2: Drop __TIME__ usage isdn/diva: Drop __TIME__ usage atm: Drop __TIME__ usage dlm: Drop __TIME__ usage wan/pc300: Drop __TIME__ usage parport: Drop __TIME__ usage hdlcdrv: Drop __TIME__ usage baycom: Drop __TIME__ usage pmcraid: Drop __DATE__ usage edac: Drop __DATE__ usage rio: Drop __DATE__ usage scsi/wd33c93: Drop __TIME__ usage scsi/in2000: Drop __TIME__ usage aacraid: Drop __TIME__ usage media/cx231xx: Drop __TIME__ usage media/radio-maxiradio: Drop __TIME__ usage nozomi: Drop __TIME__ usage cyclades: Drop __TIME__ usage
2011-05-26[SCSI] MAINTAINERS update for SCSI (new email address)James Bottomley
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-26gpio/pca953x: Add support for pca9574 and pca9575 devicesHaojian Zhuang
PCA957x is i2c gpio expander, and similar to PCA953x. Although register configurations are different between PCA957x and PCA953x. They can share a lot of components, such as IRQ handling, GPIO IN/OUT. So updating PCA953x driver to support PCA957x chips. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio/cs5535: Show explicit dependency between gpio_cs5535 and mfd_cs5535Ed Wildgoose
cs5535-gpio.c has been split into two, with various setup moved into cs5535-mfd.c. Given that cs5535-gpio will not load without the -mfd part, lets make that dependency explicit in Kconfig Signed-off-by: Ed Wildgoose <kernel@wildgooses.com> Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26mac80211: stop queues before rate control updationRajkumar Manoharan
Stop tx queues before updating rate control to ensure proper rate selection. Otherwise packets can be transmitted in 40 Mhz whereas hw is configured in HT20. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-26ath9k: set 40 Mhz rate only if hw is configured in ht40Rajkumar Manoharan
Whenever there is a channel width change from 40 Mhz to 20 Mhz, the hardware is reconfigured to ht20. Meantime before doing the rate control updation, the packets are being transmitted are selected rate with IEEE80211_TX_RC_40_MHZ_WIDTH. While transmitting ht40 rate packets in ht20 mode is causing baseband panic with AR9003 based chips. ==== BB update: BB status=0x02001109 ==== ath: ** BB state: wd=1 det=1 rdar=0 rOFDM=1 rCCK=1 tOFDM=0 tCCK=0 agc=2 src=0 ** ath: ** BB WD cntl: cntl1=0xffff0085 cntl2=0x00000004 ** ath: ** BB mode: BB_gen_controls=0x000033c0 ** ath: ** BB busy times: rx_clear=99%, rx_frame=0%, tx_frame=0% ** ath: ==== BB update: done ==== Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-26ath9k_hw: disable phy restart on baseband panic caused by RXSMRajkumar Manoharan
While receiving unsupported rate frame rx state machine gets into a state 0xb and if phy_restart happens in that state, BB would go hang. If RXSM is in 0xb state after first bb panic, ensure to disable the phy_restart. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-26ath9k: Reset chip on baseband hangRajkumar Manoharan
Resetting hardware helps to recover from baseband hang/panic for AR9003 based chips. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-26b43: N-PHY: initialize last var in calibration functionRafał Miłecki
Reported-by: Larry Finger <larry.finger@lwfinger.net> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-26rtlwifi: Use order 2 RX buffer allocation only if necessaryLarry Finger
Although a previous fix handles the kernel panics that result from failure to allocate a new RX buffer, memory fragmentation can be reduced if the amsdu_8k capability is disabled as new buffers need only be of O(0), not O(2). Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-26rtlwifi: Fix kernel panic resulting from RX buffer allocation failureLarry Finger
To handle amsdu_8k capability, the PCI routine of this driver must allocate receive buffers of order 2. Under heavy load, this causes fragmentation of memory. The present code releases the current buffer before checking to see if a new one is availble. Recovery from allocation failures is not possible, which results in kernel panics. The fix is to reorder the code to check that a new buffer can be allocated before the old one is released. If not possible, the received frame is dropped and the old one is reused. Without this change, it is impossible to transfer a 2 GB file without a kernel panic. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [2.6.{37,38,39}] Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-21 16:47:30 +0000