summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-12-10smsc95xx: fix register dump of last registerSteve Glendinning
This patch fixes the ethtool register dump for smsc95xx to dump all 4 bytes of the final register (COE_CR) instead of just the first byte. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-10smsc75xx: only set mac address once on bindSteve Glendinning
This patch changes when we decide what the device's MAC address is from per ifconfig up to once when the device is connected. Without this patch, a manually forced device MAC is overwritten on ifconfig down/up. Also devices that have no EEPROM are assigned a new random address on ifconfig down/up instead of persisting the same one. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Reported-by: Robert Cunningham <rcunningham@nsmsurveillance.com> Cc: Bjorn Mork <bjorn@mork.no> Cc: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-10net: remove obsolete simple_strto<foo>Abhijit Pawar
This patch replace the obsolete simple_strto<foo> with kstrto<foo> Signed-off-by: Abhijit Pawar <abhi.c.pawar@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-10ext4: remove unused variable from ext4_ext_in_cache()Zhi Yong Wu
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Zheng Liu <gnehzuil.liu@gmail.com>
2012-12-10ext4: remove redundant initialization in ext4_fill_super()Guo Chao
We use kzalloc() to allocate sbi, no need to zero its field. Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: remove redundant code in ext4_alloc_inode()Guo Chao
inode_init_always() will initialize inode->i_data.writeback_index anyway, no need to do this in ext4_alloc_inode(). Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Lukas Czerner <lczerner@redhat.com>
2012-12-10ext4: use sync_inode_metadata() when syncing inode metadataGuo Chao
We have a dedicated interface to sync inode metadata. Use it to simplify ext4's code some. Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Lukas Czerner <lczerner@redhat.com>
2012-12-10ext4: enable ext4 inline supportTao Ma
Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: let fallocate handle inline data correctlyTao Ma
If we are punching hole in a file, we will return ENOTSUPP. As for the fallocation of some extents, we will convert the inline data to a normal extent based file first. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: let ext4_truncate handle inline data correctlyTao Ma
Signed-off-by: Robin Dong <sanbai@taobao.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: evict inline data out if we need to strore xattr in inodeTao Ma
Now we that store data in the inode, in case we need to store some xattrs and inode doesn't have enough space, Andreas suggested that we should keep the xattr(metadata) in and data should be pushed out. So this patch does the work. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: let fiemap work with inline dataTao Ma
fiemap is used to find the disk layout of a file, as for inline data, let us just pretend like a file with just one extent. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: let ext4_rename handle inline dirTao Ma
In case we rename a directory, ext4_rename has to read the dir block and change its dotdot's information. The old ext4_rename encapsulated the dir_block read into itself. So this patch adds a new function ext4_get_first_dir_block() which gets the dir buffer information so the ext4_rename can handle it properly. As it will also change the parent inode number, we return the parent_de so that ext4_rename() can handle it more easily. ext4_find_entry is also changed so that the caller(rename) can tell whether the found entry is an inlined one or not and journaling the corresponding buffer head. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: let empty_dir handle inline dirTao Ma
empty_dir is used when deleting a dir. So it should handle inline dir properly. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: let ext4_delete_entry() handle inline dataTao Ma
Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: make ext4_delete_entry genericTao Ma
Currently ext4_delete_entry() is used only for dir entry removing from a dir block. So let us create a new function ext4_generic_delete_entry and this function takes a entry_buf and a buf_size so that it can be used for inline data. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: let ext4_find_entry handle inline dataTao Ma
Create a new function ext4_find_inline_entry() to handle the case of inline data. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: create a new function search_dirTao Ma
search_dirblock is used to search a dir block, but the code is almost the same for searching an inline dir. So create a new fuction search_dir and let search_dirblock call it. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: let ext4_readdir handle inline dataTao Ma
For "." and "..", we just call filldir by ourselves instead of iterating the real dir entry. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: let add_dir_entry handle inline data properlyTao Ma
This patch let add_dir_entry handle the inline data case. So the dir is initialized as inline dir first and then we can try to add some files to it, when the inline space can't hold all the entries, a dir block will be created and the dir entry will be moved to it. Also for an inlined dir, "." and ".." are removed and we only use 4 bytes to store the parent inode number. These 2 entries will be added when we convert an inline dir to a block-based one. [ Folded in patch from Dan Carpenter to remove an unused variable. ] Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: create __ext4_insert_dentry for dir entry insertionTao Ma
The old add_dirent_to_buf handles all the work related to the work of adding dir entry to a dir block. Now we have inline data, so create 2 new function __ext4_find_dest_de and __ext4_insert_dentry that do the real work and let add_dirent_to_buf call them. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: refactor __ext4_check_dir_entry() to accept start and sizeTao Ma
The __ext4_check_dir_entry() function() is used to check whether the de is over the block boundary. Now with inline data, it could be within the block boundary while exceeds the inode size. So check this function to check the overflow more precisely. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: make ext4_init_dot_dotdot for inline dir usageTao Ma
Currently, the initialization of dot and dotdot are encapsulated in ext4_mkdir and also bond with dir_block. So create a new function named ext4_init_new_dir and the initialization is moved to ext4_init_dot_dotdot. Now it will called either in the normal non-inline case(rec_len of ".." will cover the whole block) or when we converting an inline dir to a block(rec len of ".." will be the real length). The start of the next entry is also returned for inline dir usage. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: add delalloc support for inline dataTao Ma
For delayed allocation mode, we write to inline data if the file is small enough. And in case of we write to some offset larger than the inline size, the 1st page is dirtied, so that ext4_da_writepages can handle the conversion. When the 1st page is initialized with blocks, the inline part is removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: add journalled write support for inline dataTao Ma
Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: add normal write support for inline dataTao Ma
For a normal write case (not journalled write, not delayed allocation), we write to the inline if the file is small and convert it to an extent based file when the write is larger than the max inline size. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: add read support for inline dataTao Ma
Let readpage and readpages handle the case when we want to read an inlined file. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10ext4: add the basic function for inline data supportTao Ma
Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10Revert "revert "Revert "mm: remove __GFP_NO_KSWAPD""" and associated damageLinus Torvalds
This reverts commits a50915394f1fc02c2861d3b7ce7014788aa5066e and d7c3b937bdf45f0b844400b7bf6fd3ed50bac604. This is a revert of a revert of a revert. In addition, it reverts the even older i915 change to stop using the __GFP_NO_KSWAPD flag due to the original commits in linux-next. It turns out that the original patch really was bogus, and that the original revert was the correct thing to do after all. We thought we had fixed the problem, and then reverted the revert, but the problem really is fundamental: waking up kswapd simply isn't the right thing to do, and direct reclaim sometimes simply _is_ the right thing to do. When certain allocations fail, we simply should try some direct reclaim, and if that fails, fail the allocation. That's the right thing to do for THP allocations, which can easily fail, and the GPU allocations want to do that too. So starting kswapd is sometimes simply wrong, and removing the flag that said "don't start kswapd" was a mistake. Let's hope we never revisit this mistake again - and certainly not this many times ;) Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-10ipv4: ip_check_defrag must not modify skb before unsharingJohannes Berg
ip_check_defrag() might be called from af_packet within the RX path where shared SKBs are used, so it must not modify the input SKB before it has unshared it for defragmentation. Use skb_copy_bits() to get the IP header and only pull in everything later. The same is true for the other caller in macvlan as it is called from dev->rx_handler which can also get a shared SKB. Reported-by: Eric Leblond <eric@regit.org> Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-10Revert "mm: avoid waking kswapd for THP allocations when compaction is ↵Linus Torvalds
deferred or contended" This reverts commit 782fd30406ecb9d9b082816abe0c6008fc72a7b0. We are going to reinstate the __GFP_NO_KSWAPD flag that has been removed, the removal reverted, and then removed again. Making this commit a pointless fixup for a problem that was caused by the removal of __GFP_NO_KSWAPD flag. The thing is, we really don't want to wake up kswapd for THP allocations (because they fail quite commonly under any kind of memory pressure, including when there is tons of memory free), and these patches were just trying to fix up the underlying bug: the original removal of __GFP_NO_KSWAPD in commit c654345924f7 ("mm: remove __GFP_NO_KSWAPD") was simply bogus. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-10virtio_net: fix a typo in virtnet_alloc_queues()Amerigo Wang
Obviously it should check !vi->rq. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Jason Wang <jasowang@redhat.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-10bridge: make buffer larger in br_setlink()Dan Carpenter
We pass IFLA_BRPORT_MAX to nla_parse_nested() so we need IFLA_BRPORT_MAX + 1 elements. Also Smatch complains that we read past the end of the array when in br_set_port_flag() when it's called with IFLA_BRPORT_FAST_LEAVE. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-10x86: Fix the error of using "const" in gen-insn-attr-x86.awkCong Ding
The original version code causes following sparse warnings: arch/x86/lib/inat-tables.c:1080:25: warning: duplicate const arch/x86/lib/inat-tables.c:1095:25: warning: duplicate const arch/x86/lib/inat-tables.c:1118:25: warning: duplicate const for the variables inat_escape_tables, inat_group_tables, and inat_avx_tables in the code generated by gen-insn-attr-x86.awk. The author Masami Hiramutsu says here is to make both the value pointed by the pointers and the pointers itself read-only, so we move the "const" to be after the "*". Signed-off-by: Cong Ding <dinggnu@gmail.com> Link: http://lkml.kernel.org/r/20121209082103.GA9181@gmail.com Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-12-10PCI: Use phys_addr_t for physical ROM addressBjorn Helgaas
Use phys_addr_t rather than "void *" for physical memory address. This removes casts and fixes a "cast from pointer to integer of different size" warning on ppc44x_defconfig. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-12-11regmap: debugfs: Cache offsets of valid regions for dumpMark Brown
Avoid doing a linear scan of the entire register map for each read() of the debugfs register dump by recording the offsets where valid registers exist when we first read the registers file. This assumes the set of valid registers never changes, if this is not the case invalidation of the cache will be required. This could be further improved for large blocks of contiguous registers by calculating the register we will read from within the block - currently we do a linear scan of the block. An rbtree may also be worthwhile. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-11regmap: debugfs: Factor out initial seekMark Brown
In preparation for doing things a bit more quickly than a linear scan factor out the initial seek from the debugfs register dump. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-11regmap: debugfs: Avoid overflows for very small readsMark Brown
If count is less than the size of a register then we may hit integer wraparound when trying to move backwards to check if we're still in the buffer. Instead move the position forwards to check if it's still in the buffer, we are unlikely to be able to allocate a buffer sufficiently big to overflow here. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-12-10HOWTO: fix double words typoCristian Stoica
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com> Acked-by: Rob Landley <rob@landley.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-12-10mtd: mxc_nand: reorder part_probes to let cmdline override other sourcesLothar Waßmann
The cmdline is the easiest to change source of information. Thus let it take precedence over 'RedBoot' and 'ofpart'. This makes the mxc_nand driver to be in sync with all other NAND drivers that support 'cmdlinepart' partition parsing. Also change 'const char *' to 'const char const *' as advised by checkpatch.pl Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10mtd: mxc_nand: fix unbalanced clk_disable() in error pathLothar Waßmann
If nand_scan_ident() or nand_scan_tail() fails, the NAND chip may have been deselected and the clock already disabled. Thus, check 'clk_act' in the error path to decide whether the clock still needs to be disabled. This fixes a: |WARNING: at drivers/clk/clk.c:472 __clk_disable+0x3c/0x78() Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10mtd: nandsim: Introduce debugfs infrastructureEzequiel Garcia
It's more user friendly to report debug information and statistics through debugfs, than to use printing facilites. This patch introduces a very minimal debugfs infrastructure and moves eraseblock wear report to an entry located at: /sys/kernel/debug/nandsim/wear_report This means we can remove rptwear option and just let the user get the wear report when we needs to. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10Merge remote-tracking branch 'regulator/topic/gpio' into regulator-nextMark Brown
2012-12-10regulator: gpio-regulator: gpio_set_value should use cansleepLee Jones
If it's possible for gpio_set_value to sleep, we should be using the *_cansleep call instead. This patch fixes multiple warnings from gpiolib. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10regulator: gpio-regulator: Fix logical error in for() loopLee Jones
The cond-statement of this particular for() loop will always be true as long as at least one voltage-shifting GPIO is present. If it wasn't for the break below, we'd be stuck in a forever loop. This patch inserts the correct cond-statement into the statement. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10mtd: physmap_of: error checking to prevent a NULL pointer dereferenceAnton Prins
This patch solves a NULL pointer dereference, this may occur if the tuple is not mappable (jumps to continue in the for-loop). Out of the loop possible results are: - info->list_size == 0 if no of the tuples is mappable - info->list_size == 1 - info->list_size > 1 If no one of the supplied tuples is mappable (info->list_size == 0) and info->cmtd will not be set. But it is used in mtd_device_parse_register, OOPS! actually it should generate an error in this case! Signed-off-by: Anton Prins <anton.prins@nl.bosch.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10mtg: docg3: potential divide by zero in doc_write_oob()Dan Carpenter
If we set oobdelta to zero then we will either return -EINVAL or hit a divide (modulus) by zero on the next line when we check "(ooblen % oobdelta)". It's better to just return -EINVAL here instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10mtd: bcm47xxnflash: writing supportRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10UBI: embed ubi_debug_info field in ubi_device structEzequiel Garcia
ubi_debug_info struct was dynamically allocated which is always suboptimal, for it tends to fragment memory and make the code error-prone. Fix this by embedding it in ubi_device struct. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10UBI: introduce helpers dbg_chk_{io, gen}Ezequiel Garcia
With this patch code is a bit more readable and there's no generated code or functionality impact. Furthermore, this abstracts implementation details and will allow to change ubi_debug_info in a less invasive way. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-17 01:48:02 +0000