| Age | Commit message (Collapse) | Author |
|---|
|
The CBTX PHY is a Fast Ethernet PHY integrated into the SJA1110 A/B/C
automotive Ethernet switches.
It was hoped it would work with the Generic PHY driver, but alas, it
doesn't. The most important reason why is that the PHY is powered down
by default, and it needs a vendor register to power it on.
It has a linear memory map that is accessed over SPI by the SJA1110
switch driver, which exposes a fake MDIO controller. It has the
following (and only the following) standard clause 22 registers:
0x0: MII_BMCR
0x1: MII_BMSR
0x2: MII_PHYSID1
0x3: MII_PHYSID2
0x4: MII_ADVERTISE
0x5: MII_LPA
0x6: MII_EXPANSION
0x7: the missing MII_NPAGE for Next Page Transmit Register
Every other register is vendor-defined.
The register map expands the standard clause 22 5-bit address space of
0x20 registers, however the driver does not need to access the extra
registers for now (and hopefully never). If it ever needs to do that, it
is possible to implement a fake (software) page switching mechanism
between the PHY driver and the SJA1110 MDIO controller driver.
Also, Auto-MDIX is turned off by default in hardware, the driver turns
it on by default and reports the current status. I've tested this with a
VSC8514 link partner and a crossover cable, by forcing the mode on the
link partner, and seeing that the CBTX PHY always sees the reverse of
the mode forced on the VSC8514 (and that traffic works). The link
doesn't come up (as expected) if MDI modes are forced on both ends in
the same way (with the cross-over cable, that is).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230418190141.1040562-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Relax netdev chain creation to allow for loading the ruleset, then
adding/deleting devices at a later stage. Hardware offload does not
support for this feature yet.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch allows for deleting devices in an existing netdev chain.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch allows users to add devices to an existing netdev chain.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Rename nft_flowtable_hooks_destroy() by nft_hooks_destroy() to prepare
for netdev chain device updates.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In most cases, table, name and handle is sufficient for userspace to
identify an object that has been deleted. Skipping unneeded fields in
the netlink attributes in the message saves bandwidth (ie. less chances
of hitting ENOBUFS).
Rules are an exception: the existing userspace monitor code relies on
the rule definition. This exception can be removed by implementing a
rule cache in userspace, this is already supported by the tracing
infrastructure.
Regarding flowtables, incremental deletion of devices is possible.
Skipping a full notification allows userspace to differentiate between
flowtable removal and incremental removal of devices.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Flowtable and netdev chains are bound to one or several netdevice,
extend netlink error reporting to specify the the netdevice that
triggers the error.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Correct some spelling errors flagged by codespell and found by inspection.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Remove EnterFunction and LeaveFunction.
These debugging macros seem well past their use-by date. And seem to
have little value these days. Removing them allows some trivial cleanup
of some exit paths for some functions. These are also included in this
patch. There is likely scope for further cleanup of both debugging and
unwind paths. But let's leave that for another day.
Only intended to change debug output, and only when CONFIG_IP_VS_DEBUG
is enabled. Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Consistently use array_size() to calculate the size of ip_vs_conn_tab
in bytes.
Flagged by Coccinelle:
WARNING: array_size is already used (line 1498) to compute the same size
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In ip_vs_sync_conn_v0() copy is made to struct ip_vs_sync_conn_options.
That structure looks like this:
struct ip_vs_sync_conn_options {
struct ip_vs_seq in_seq;
struct ip_vs_seq out_seq;
};
The source of the copy is the in_seq field of struct ip_vs_conn. Whose
type is struct ip_vs_seq. Thus we can see that the source - is not as
wide as the amount of data copied, which is the width of struct
ip_vs_sync_conn_option.
The copy is safe because the next field in is another struct ip_vs_seq.
Make use of struct_group() to annotate this.
Flagged by gcc-13 as:
In file included from ./include/linux/string.h:254,
from ./include/linux/bitmap.h:11,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/cpuid.h:62,
from ./arch/x86/include/asm/processor.h:19,
from ./arch/x86/include/asm/timex.h:5,
from ./include/linux/timex.h:67,
from ./include/linux/time32.h:13,
from ./include/linux/time.h:60,
from ./include/linux/stat.h:19,
from ./include/linux/module.h:13,
from net/netfilter/ipvs/ip_vs_sync.c:38:
In function 'fortify_memcpy_chk',
inlined from 'ip_vs_sync_conn_v0' at net/netfilter/ipvs/ip_vs_sync.c:606:3:
./include/linux/fortify-string.h:529:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
529 | __read_overflow2_field(q_size_field, size);
|
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
pass it as argument instead. This reduces size of traceinfo to
16 bytes. Total stack usage:
nf_tables_core.c:252 nft_do_chain 304 static
While its possible to also pass basechain as argument, doing so
increases nft_do_chaininfo function size.
Unlike pktinfo/verdict/rule the basechain info isn't used in
the expression evaluation path. gcc places it on the stack, which
results in extra push/pop when it gets passed to the trace helpers
as argument rather than as part of the traceinfo structure.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Just pass it as argument to nft_trace_notify. Stack is reduced by 8 bytes:
nf_tables_core.c:256 nft_do_chain 312 static
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
pass it as argument. No change in object size.
stack usage decreases by 8 byte:
nf_tables_core.c:254 nft_do_chain 320 static
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This helper is inlined, so keep it as small as possible.
If the static key is true, there is only a very small chance
that info->trace is false:
1. tracing was enabled at this very moment, the static key was
updated to active right after nft_do_table was called.
2. tracing was disabled at this very moment.
trace->info is already false, the static key is about to
be patched to false soon.
In both cases, no event will be sent because info->trace
is false (checked in noinline slowpath). info->nf_trace is irrelevant.
The nf_trace update is redunant in this case, but this will only
happen for short duration, when static key flips.
text data bss dec hex filename
old: 2980 192 32 3204 c84 nf_tables_core.o
new: 2964 192 32 3188 c74i nf_tables_core.o
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We only need to validate tables that saw changes in the current
transaction.
The existing code revalidates all tables, but this isn't needed as
cross-table jumps are not allowed (chains have table scope).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The ->cleanup callback needs to be removed, this doesn't work anymore as
the transaction mutex is already released in the ->abort function.
Just do it after a successful validation pass, this either happens
from commit or abort phases where transaction mutex is held.
Fixes: f102d66b335a ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Now that the rule trailer/end marker and the rcu head reside in the
same structure, we no longer need to save/restore the chain pointer
when performing/returning from a jump.
We can simply let the trace infra walk the evaluated rule until it
hits the end marker and then fetch the chain pointer from there.
When the rule is NULL (policy tracing), then chain and basechain
pointers were already identical, so just use the basechain.
This cuts size of jumpstack in half, from 256 to 128 bytes in 64bit,
scripts/stackusage says:
nf_tables_core.c:251 nft_do_chain 328 static
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Walk the rule headers until the trailer one (last_bit flag set) instead
of stopping at last_rule address.
This avoids the need to store the address when jumping to another chain.
This cuts size of jumpstack array by one third, on 64bit from
384 to 256 bytes. Still, stack usage is still quite large:
scripts/stackusage:
nf_tables_core.c:258 nft_do_chain 496 static
Next patch will also remove chain pointer.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In order to free the rules in a chain via call_rcu, the rule array used
to stash a rcu_head and space for a pointer at the end of the rule array.
When the current nft_rule_dp blob format got added in
2c865a8a28a1 ("netfilter: nf_tables: add rule blob layout"), this results
in a double-trailer:
size (unsigned long)
struct nft_rule_dp
struct nft_expr
...
struct nft_rule_dp
struct nft_expr
...
struct nft_rule_dp (is_last=1) // Trailer
The trailer, struct nft_rule_dp (is_last=1), is not accounted for in size,
so it can be located via start_addr + size.
Because the rcu_head is stored after 'start+size' as well this means the
is_last trailer is *aliased* to the rcu_head (struct nft_rules_old).
This is harmless, because at this time the nft_do_chain function never
evaluates/accesses the trailer, it only checks the address boundary:
for (; rule < last_rule; rule = nft_rule_next(rule)) {
...
But this way the last_rule address has to be stashed in the jump
structure to restore it after returning from a chain.
nft_do_chain stack usage has become way too big, so put it on a diet.
Without this patch is impossible to use
for (; !rule->is_last; rule = nft_rule_next(rule)) {
... because on free, the needed update of the rcu_head will clobber the
nft_rule_dp is_last bit.
Furthermore, also stash the chain pointer in the trailer, this allows
to recover the original chain structure from nf_tables_trace infra
without a need to place them in the jump struct.
After this patch it is trivial to diet the jump stack structure,
done in the next two patches.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.3, part #4
- Plug a buffer overflow due to the use of the user-provided register
width for firmware regs. Outright reject accesses where the
user register width does not match the kernel representation.
- Protect non-atomic RMW operations on vCPU flags against preemption,
as an update to the flags by an intervening preemption could be lost.
|
|
MIPS's exit sections are discarded at runtime as well.
Fixes link error:
`.exit.text' referenced in section `__jump_table' of fs/fuse/inode.o:
defined in discarded section `.exit.text' of fs/fuse/inode.o
Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
4 commits are involved here:
A (2016): commit 0de8ce3ee8e3 ("PCI: hv: Allocate physically contiguous hypercall params buffer")
B (2017): commit be66b6736591 ("PCI: hv: Use page allocation for hbus structure")
C (2019): commit 877b911a5ba0 ("PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer")
D (2018): commit 68bb7bfb7985 ("X86/Hyper-V: Enable IPI enlightenments")
Patch D introduced the per-CPU hypercall input page "hyperv_pcpu_input_arg"
in 2018. With patch D, we no longer need the per-Hyper-V-PCI-bus hypercall
input page "hbus->retarget_msi_interrupt_params" that was added in patch A,
and the issue addressed by patch B is no longer an issue, and we can also
get rid of patch C.
The change here is required for PCI device assignment to work for
Confidential VMs (CVMs) running without a paravisor, because otherwise we
would have to call set_memory_decrypted() for
"hbus->retarget_msi_interrupt_params" before calling the hypercall
HVCALL_RETARGET_INTERRUPT.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20230421013025.17152-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
This reverts commit 5c62d5aab8752e5ee7bfbe75ed6060db1c787f98.
This broke wake-on-lan for multiple people, and for much too long.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217069
Link: https://lore.kernel.org/all/754225a2-95a9-2c36-1886-7da1a78308c2@loongson.cn/
Link: https://github.com/acpica/acpica/pull/866
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Jianmin Lv <lvjianmin@loongson.cn>
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Bob Moore <robert.moore@intel.com>
Cc: stable@kernel.org # 6.2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Test verifier/value_ptr_arith automatically converted to use inline assembly.
Test cases "sanitation: alu with different scalars 2" and
"sanitation: alu with different scalars 3" are updated to
avoid -ENOENT as return value, as __retval() annotation
only supports numeric literals.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-25-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/value_illegal_alu automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-24-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/unpriv semi-automatically converted to use inline assembly.
The verifier/unpriv.c had to be split in two parts:
- the bulk of the tests is in the progs/verifier_unpriv.c;
- the single test that needs `struct bpf_perf_event_data`
definition is in the progs/verifier_unpriv_perf.c.
The tests above can't be in a single file because:
- first requires inclusion of the filter.h header
(to get access to BPF_ST_MEM macro, inline assembler does
not support this isntruction);
- the second requires vmlinux.h, which contains definitions
conflicting with filter.h.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-23-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/subreg automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-22-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/spin_lock automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-21-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/sock automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-20-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/search_pruning automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-19-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/runtime_jit automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-18-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/regalloc automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-17-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/ref_tracking automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-16-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/map_ptr_mixing automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-13-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/map_in_map automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-12-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/lwt automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/loops1 automatically converted to use inline assembly.
There are a few modifications for the converted tests.
"tracepoint" programs do not support test execution, change program
type to "xdp" (which supports test execution) for the following tests
that have __retval tags:
- bounded loop, count to 4
- bonded loop containing forward jump
Also, remove the __retval tag for test:
- bounded loop, count from positive unknown to 4
As it's return value is a random number.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/jeq_infer_not_null automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/direct_packet_access automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/d_path automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/ctx automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/btf_ctx_access automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/bpf_get_stack automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test verifier/bounds automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In order to express test cases that use bpf_tail_call() intrinsic it
is necessary to have several programs to be loaded at a time.
This commit adds __auxiliary annotation to the set of annotations
supported by test_loader.c. Programs marked as auxiliary are always
loaded but are not treated as a separate test.
For example:
void dummy_prog1(void);
struct {
__uint(type, BPF_MAP_TYPE_PROG_ARRAY);
__uint(max_entries, 4);
__uint(key_size, sizeof(int));
__array(values, void (void));
} prog_map SEC(".maps") = {
.values = {
[0] = (void *) &dummy_prog1,
},
};
SEC("tc")
__auxiliary
__naked void dummy_prog1(void) {
asm volatile ("r0 = 42; exit;");
}
SEC("tc")
__description("reference tracking: check reference or tail call")
__success __retval(0)
__naked void check_reference_or_tail_call(void)
{
asm volatile (
"r2 = %[prog_map] ll;"
"r3 = 0;"
"call %[bpf_tail_call];"
"r0 = 0;"
"exit;"
:: __imm(bpf_tail_call),
: __clobber_all);
}
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230421174234.2391278-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Florian Westphal says:
====================
Changes since last version:
- rework test case in last patch wrt. ctx->skb dereference etc (Alexei)
- pacify bpf ci tests, netfilter program type missed string translation
in libbpf helper.
This still uses runtime btf walk rather than extending
the btf trace array as Alexei suggested, I would do this later (or someone else can).
v1 cover letter:
Add minimal support to hook bpf programs to netfilter hooks, e.g.
PREROUTING or FORWARD.
For this the most relevant parts for registering a netfilter
hook via the in-kernel api are exposed to userspace via bpf_link.
The new program type is 'tracing style', i.e. there is no context
access rewrite done by verifier, the function argument (struct bpf_nf_ctx)
isn't stable.
There is no support for direct packet access, dynptr api should be used
instead.
With this its possible to build a small test program such as:
#include "vmlinux.h"
extern int bpf_dynptr_from_skb(struct __sk_buff *skb, __u64 flags,
struct bpf_dynptr *ptr__uninit) __ksym;
extern void *bpf_dynptr_slice(const struct bpf_dynptr *ptr, uint32_t offset,
void *buffer, uint32_t buffer__sz) __ksym;
SEC("netfilter")
int nf_test(struct bpf_nf_ctx *ctx)
{
struct nf_hook_state *state = ctx->state;
struct sk_buff *skb = ctx->skb;
const struct iphdr *iph, _iph;
const struct tcphdr *th, _th;
struct bpf_dynptr ptr;
if (bpf_dynptr_from_skb(skb, 0, &ptr))
return NF_DROP;
iph = bpf_dynptr_slice(&ptr, 0, &_iph, sizeof(_iph));
if (!iph)
return NF_DROP;
th = bpf_dynptr_slice(&ptr, iph->ihl << 2, &_th, sizeof(_th));
if (!th)
return NF_DROP;
bpf_printk("accept %x:%d->%x:%d, hook %d ifin %d\n",
iph->saddr, bpf_ntohs(th->source), iph->daddr,
bpf_ntohs(th->dest), state->hook, state->in->ifindex);
return NF_ACCEPT;
}
Then, tail /sys/kernel/tracing/trace_pipe.
Changes since v3:
- uapi: remove 'reserved' struct member, s/prio/priority (Alexei)
- add ctx access test cases (Alexei, see last patch)
- some arm32 can only handle cmpxchg on u32 (build bot)
- Fix kdoc annotations (Simon Horman)
- bpftool: prefer p_err, not fprintf (Quentin)
- add test cases in separate patch
Changes since v2:
1. don't WARN when user calls 'bpftool loink detach' twice
restrict attachment to ip+ip6 families, lets relax this
later in case arp/bridge/netdev are needed too.
2. show netfilter links in 'bpftool net' output as well.
Changes since v1:
1. Don't fail to link when CONFIG_NETFILTER=n (build bot)
2. Use test_progs instead of test_verifier (Alexei)
Changes since last RFC version:
1. extend 'bpftool link show' to print prio/hooknum etc
2. extend 'nft list hooks' so it can print the bpf program id
3. Add an extra patch to artificially restrict bpf progs with
same priority. Its fine from a technical pov but it will
cause ordering issues (most recent one comes first).
Can be removed later.
4. Add test_run support for netfilter prog type and a small
extension to verifier tests to make sure we can't return
verdicts like NF_STOLEN.
5. Alter the netfilter part of the bpf_link uapi struct:
- add flags/reserved members.
Not used here except returning errors when they are nonzero.
Plan is to allow the bpf_link users to enable netfilter
defrag or conntrack engine by setting feature flags at
link create time in the future.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Extend prog_tests with two test cases:
# ./test_progs --allow=verifier_netfilter_retcode
#278/1 verifier_netfilter_retcode/bpf_exit with invalid return code. test1:OK
#278/2 verifier_netfilter_retcode/bpf_exit with valid return code. test2:OK
#278/3 verifier_netfilter_retcode/bpf_exit with valid return code. test3:OK
#278/4 verifier_netfilter_retcode/bpf_exit with invalid return code. test4:OK
#278 verifier_netfilter_retcode:OK
This checks that only accept and drop (0,1) are permitted.
NF_QUEUE could be implemented later if we can guarantee that attachment
of such programs can be rejected if they get attached to a pf/hook that
doesn't support async reinjection.
NF_STOLEN could be implemented via trusted helpers that can guarantee
that the skb will eventually be free'd.
v4: test case for bpf_nf_ctx access checks, requested by Alexei Starovoitov.
v5: also check ctx->{state,skb} can be dereferenced (Alexei).
# ./test_progs --allow=verifier_netfilter_ctx
#281/1 verifier_netfilter_ctx/netfilter invalid context access, size too short:OK
#281/2 verifier_netfilter_ctx/netfilter invalid context access, size too short:OK
#281/3 verifier_netfilter_ctx/netfilter invalid context access, past end of ctx:OK
#281/4 verifier_netfilter_ctx/netfilter invalid context, write:OK
#281/5 verifier_netfilter_ctx/netfilter valid context read and invalid write:OK
#281/6 verifier_netfilter_ctx/netfilter test prog with skb and state read access:OK
#281/7 verifier_netfilter_ctx/netfilter test prog with skb and state read access @unpriv:OK
#281 verifier_netfilter_ctx:OK
Summary: 1/7 PASSED, 0 SKIPPED, 0 FAILED
This checks:
1/2: partial reads of ctx->{skb,state} are rejected
3. read access past sizeof(ctx) is rejected
4. write to ctx content, e.g. 'ctx->skb = NULL;' is rejected
5. ctx->state content cannot be altered
6. ctx->state and ctx->skb can be dereferenced
7. ... same program fails for unpriv (CAP_NET_ADMIN needed).
Link: https://lore.kernel.org/bpf/20230419021152.sjq4gttphzzy6b5f@dhcp-172-26-102-232.dhcp.thefacebook.com/
Link: https://lore.kernel.org/bpf/20230420201655.77kkgi3dh7fesoll@MacBook-Pro-6.local/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-8-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
add glue code so a bpf program can be run using userspace-provided
netfilter state and packet/skb.
Default is to use ipv4:output hook point, but this can be overridden by
userspace. Userspace provided netfilter state is restricted, only hook and
protocol families can be overridden and only to ipv4/ipv6.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-7-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Dump protocol family, hook and priority value:
$ bpftool link
2: netfilter prog 14
ip input prio -128
pids install(3264)
5: netfilter prog 14
ip6 forward prio 21
pids a.out(3387)
9: netfilter prog 14
ip prerouting prio 123
pids a.out(5700)
10: netfilter prog 14
ip input prio 21
pids test2(5701)
v2: Quentin Monnet suggested to also add 'bpftool net' support:
$ bpftool net
xdp:
tc:
flow_dissector:
netfilter:
ip prerouting prio 21 prog_id 14
ip input prio -128 prog_id 14
ip input prio 21 prog_id 14
ip forward prio 21 prog_id 14
ip output prio 21 prog_id 14
ip postrouting prio 21 prog_id 14
'bpftool net' only dumps netfilter link type, links are sorted by protocol
family, hook and priority.
v5: fix bpf ci failure: libbpf needs small update to prog_type_name[]
and probe_prog_load helper.
v4: don't fail with -EOPNOTSUPP in libbpf probe_prog_load, update
prog_type_name[] with "netfilter" entry (bpf ci)
v3: fix bpf.h copy, 'reserved' member was removed (Alexei)
use p_err, not fprintf (Quentin)
Suggested-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/eeeaac99-9053-90c2-aa33-cc1ecb1ae9ca@isovalent.com/
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-6-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
