| Age | Commit message (Collapse) | Author |
|---|
|
- Log empty slots with dev_info(), not dev_err() (Sergio Paracuellos)
* pci/controller/mt7621:
PCI: mt7621: Use dev_info() to log PCIe card detection
|
|
- Add ls1028a endpoint mode support (Xiaowei Bao)
* pci/controller/layerscape:
PCI: layerscape: Add EP mode support for ls1028a
|
|
- Select CONFIG_REGMAP_MMIO so kirin driver links correctly (Josh Triplett)
* pci/controller/kirin:
PCI: kirin: Select REGMAP_MMIO
|
|
- Use the PCI_CONF1_ADDRESS() macro to simplify config space address
computation (Pali Rohár)
* pci/controller/ixp4xx:
PCI: ixp4xx: Use PCI_CONF1_ADDRESS() macro
|
|
- Install i.MX6 PCI abort handler only when DT contains a PCI controller
claimed by the imx6 driver (H. Nikolaus Schaller)
* pci/controller/dwc:
PCI: imx6: Install the fault handler only on compatible match
|
|
- Convert Amlogic Meson AXG DWC PCIe SoC controller bindings to dt-schema
(Neil Armstrong)
- Restructure i.MX schema to extract common properties to be shared by Root
Complex and Endpoint schema (Richard Zhu)
* pci/controller/dt:
dt-bindings: imx6q-pcie: Restruct i.MX PCIe schema
dt-bindings: PCI: convert amlogic,meson-pcie.txt to dt-schema
|
|
- Add pci_dev_for_each_resource() and pci_bus_for_each_resource() iterators
to simplify loops (Andy Shevchenko)
* pci/resource:
EISA: Drop unused pci_bus_for_each_resource() index argument
PCI: Make pci_bus_for_each_resource() index optional
PCI: Document pci_bus_for_each_resource()
PCI: Introduce pci_dev_for_each_resource()
PCI: Introduce pci_resource_n()
|
|
- Wait longer for devices to become ready after resume (as we do for reset)
to accommodate Intel Titan Ridge xHCI devices (Mika Westerberg)
- Drop pci_bridge_wait_for_secondary_bus() timeout parameter since all
callers pass the same value (Mika Westerberg)
- Extend D3hot delay for NVIDIA HDA controllers to avoid unrecoverable
devices after a bus reset (Alex Williamson)
* pci/reset:
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
PCI/PM: Increase wait time after resume
|
|
- Fix pci_p2pmem_find_many() kernel-doc (Cai Huoqing)
* pci/p2pdma:
PCI/P2PDMA: Fix pci_p2pmem_find_many() kernel-doc
|
|
- Fix pciehp AB-BA deadlock between reset_lock and device_lock (Lukas
Wunner)
* pci/hotplug:
PCI: pciehp: Fix AB-BA deadlock between reset_lock and device_lock
|
|
- Use of_property_present(), instead of lower-level functions like
of_get_property(), for testing DT property presence (Rob Herring)
* pci/enumeration:
PCI: Use of_property_present() for testing DT property presence
|
|
- Work around Chromebook firmware issue that corrupts Extended Capability
list (including L1 PM Substates capability) on D3cold -> D0 transitions
(Ron Lee)
* pci/aspm:
PCI: Fix up L1SS capability for Intel Apollo Lake Root Port
|
|
- Remove unnecessary <linux/aer.h> includes (Bjorn Helgaas)
- Clear Device Status after EDR error recovery. Firmware collects EDR
error information, but the OS is responsible for clearing it (Kuppuswamy
Sathyanarayanan)
* pci/aer:
PCI/EDR: Add edr_handle_event() comments
PCI/EDR: Clear Device Status after EDR error recovery
efi/cper: Remove unnecessary aer.h include
|
|
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230322173501.3970991-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230327170205.4106310-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
'deprecated' is a boolean type which should have a value of 'true' rather
than 'yes'.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418150643.1529895-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The trailing "/" in "lvds.yaml/#" is not a valid JSON pointer. The existing
jsonschema package allows it, but coming changes make allowed "$ref" URIs
stricter.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20230418150658.1535120-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pull Rust fixes from Miguel Ojeda:
"Most of these are straightforward.
The last one is more complex, but it only touches Rust + GCC builds
which are for the moment best-effort.
- Code: Missing 'extern "C"' fix.
- Scripts: 'is_rust_module.sh' and 'generate_rust_analyzer.py' fixes.
- A couple trivial fixes
- Build: Rust + GCC build fix and 'grep' warning fix"
* tag 'rust-fixes-6.3' of https://github.com/Rust-for-Linux/linux:
rust: allow to use INIT_STACK_ALL_ZERO
rust: fix regexp in scripts/is_rust_module.sh
rust: build: Fix grep warning
scripts: generate_rust_analyzer: Handle sub-modules with no Makefile
rust: kernel: Mark rust_fmt_argument as extern "C"
rust: sort uml documentation arch support table
rust: str: fix requierments->requirements typo
|
|
We tested and found an alarm caused by nbd_ioctl arg without verification.
The UBSAN warning calltrace like below:
UBSAN: Undefined behaviour in fs/buffer.c:1709:35
signed integer overflow:
-9223372036854775808 - 1 cannot be represented in type 'long long int'
CPU: 3 PID: 2523 Comm: syz-executor.0 Not tainted 4.19.90 #1
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x3f0 arch/arm64/kernel/time.c:78
show_stack+0x28/0x38 arch/arm64/kernel/traps.c:158
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x170/0x1dc lib/dump_stack.c:118
ubsan_epilogue+0x18/0xb4 lib/ubsan.c:161
handle_overflow+0x188/0x1dc lib/ubsan.c:192
__ubsan_handle_sub_overflow+0x34/0x44 lib/ubsan.c:206
__block_write_full_page+0x94c/0xa20 fs/buffer.c:1709
block_write_full_page+0x1f0/0x280 fs/buffer.c:2934
blkdev_writepage+0x34/0x40 fs/block_dev.c:607
__writepage+0x68/0xe8 mm/page-writeback.c:2305
write_cache_pages+0x44c/0xc70 mm/page-writeback.c:2240
generic_writepages+0xdc/0x148 mm/page-writeback.c:2329
blkdev_writepages+0x2c/0x38 fs/block_dev.c:2114
do_writepages+0xd4/0x250 mm/page-writeback.c:2344
The reason for triggering this warning is __block_write_full_page()
-> i_size_read(inode) - 1 overflow.
inode->i_size is assigned in __nbd_ioctl() -> nbd_set_size() -> bytesize.
We think it is necessary to limit the size of arg to prevent errors.
Moreover, __nbd_ioctl() -> nbd_add_socket(), arg will be cast to int.
Assuming the value of arg is 0x80000000000000001) (on a 64-bit machine),
it will become 1 after the coercion, which will return unexpected results.
Fix it by adding checks to prevent passing in too large numbers.
Signed-off-by: Zhong Jinghua <zhongjinghua@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20230206145805.2645671-1-zhongjinghua@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 6fffbc7ae137 ("PCI: Honor firmware's device disabled status")
checked the firmware device status for both DT and ACPI devices. That
caused a regression in some ACPI systems. The exact reason isn't clear.
It's possibly a firmware bug. For now, at least, refactor the check to
be for DT based systems only.
Note that the original implementation leaked a refcount which is now
correctly handled.
[bhelgaas: Per ACPI r6.5, sec 6.3.7, for devices on an enumerable bus, _STA
must return with bit[0] ("device is present") set]
Link: https://lore.kernel.org/all/m2fs9lgndw.fsf@gmail.com/
Fixes: 6fffbc7ae137 ("PCI: Honor firmware's device disabled status")
Link: https://lore.kernel.org/r/20230419193513.708818-1-robh@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217317
Reported-by: Donald Hunter <donald.hunter@gmail.com>
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Binbin Zhou <zhoubinbin@loongson.cn>
Cc: Liu Peibao <liupeibao@loongson.cn>
Cc: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
There are a few fixes for new code bugs, including the Mellanox one
noted in the last networking pull. No known regressions outstanding.
Current release - regressions:
- sched: clear actions pointer in miss cookie init fail
- mptcp: fix accept vs worker race
- bpf: fix bpf_arch_text_poke() with new_addr == NULL on s390
- eth: bnxt_en: fix a possible NULL pointer dereference in unload
path
- eth: veth: take into account peer device for
NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
Current release - new code bugs:
- eth: revert "net/mlx5: Enable management PF initialization"
Previous releases - regressions:
- netfilter: fix recent physdev match breakage
- bpf: fix incorrect verifier pruning due to missing register
precision taints
- eth: virtio_net: fix overflow inside xdp_linearize_page()
- eth: cxgb4: fix use after free bugs caused by circular dependency
problem
- eth: mlxsw: pci: fix possible crash during initialization
Previous releases - always broken:
- sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg
- netfilter: validate catch-all set elements
- bridge: don't notify FDB entries with "master dynamic"
- eth: bonding: fix memory leak when changing bond type to ethernet
- eth: i40e: fix accessing vsi->active_filters without holding lock
Misc:
- Mat is back as MPTCP co-maintainer"
* tag 'net-6.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
net: bridge: switchdev: don't notify FDB entries with "master dynamic"
Revert "net/mlx5: Enable management PF initialization"
MAINTAINERS: Resume MPTCP co-maintainer role
mailmap: add entries for Mat Martineau
e1000e: Disable TSO on i219-LM card to increase speed
bnxt_en: fix free-runnig PHC mode
net: dsa: microchip: ksz8795: Correctly handle huge frame configuration
bpf: Fix incorrect verifier pruning due to missing register precision taints
hamradio: drop ISA_DMA_API dependency
mlxsw: pci: Fix possible crash during initialization
mptcp: fix accept vs worker race
mptcp: stops worker on unaccepted sockets at listener close
net: rpl: fix rpl header size calculation
net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()
bonding: Fix memory leak when changing bond type to Ethernet
veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next()
bnxt_en: Fix a possible NULL pointer dereference in unload path
bnxt_en: Do not initialize PTP on older P3/P4 chips
netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull cpufreq/ARM updates for 6.4 from Viresh Kumar:
"- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Remove MODULE_LICENSE in non-modules (Nick Alcock).
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss).
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson).
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski).
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno)."
|
|
intel_pmc_core displays a warning when the module parameter
`warn_on_s0ix_failures` is set and a suspend didn't get to a HW sleep
state.
Report this to the standard kernel reporting infrastructure so that
userspace software can query after the suspend cycle is done.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently counters are only captured during suspend when the
warn_on_s0ix_failures module parameter is set.
In order to relay this counter information to the kernel reporting
infrastructure adjust it so that the counters are always captured.
warn_on_s0ix_failures will be utilized solely for messaging by
the driver instead.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
amd_pmc displays a warning when a suspend didn't get to the deepest
state and a dynamic debugging message with the duration if it did.
Rather than logging to dynamic debugging the duration spent in the
deepest state, report this to the standard kernel reporting
infrastructure so that userspace software can query after the
suspend cycle is done.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Userspace can't easily discover how much of a sleep cycle was spent in a
hardware sleep state without using kernel tracing and vendor specific sysfs
or debugfs files.
To make this information more discoverable, introduce 3 new sysfs files:
1) The time spent in a hw sleep state for last cycle.
2) The time spent in a hw sleep state since the kernel booted
3) The maximum time that the hardware can report for a sleep cycle.
All of these files will be present only if the system supports s2idle.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* for-next/sysreg:
arm64/sysreg: Convert HFGITR_EL2 to automatic generation
arm64/idreg: Don't disable SME when disabling SVE
arm64/sysreg: Update ID_AA64PFR1_EL1 for DDI0601 2022-12
arm64/sysreg: Convert HFG[RW]TR_EL2 to automatic generation
arm64/sysreg: allow *Enum blocks in SysregFields blocks
|
|
* for-next/stacktrace:
arm64: move PAC masks to <asm/pointer_auth.h>
arm64: use XPACLRI to strip PAC
arm64: avoid redundant PAC stripping in __builtin_return_address()
arm64: stacktrace: always inline core stacktrace functions
arm64: stacktrace: move dump functions to end of file
arm64: stacktrace: recover return address for first entry
|
|
* for-next/perf: (24 commits)
KVM: arm64: Ensure CPU PMU probes before pKVM host de-privilege
drivers/perf: hisi: add NULL check for name
drivers/perf: hisi: Remove redundant initialized of pmu->name
perf/arm-cmn: Fix port detection for CMN-700
arm64: pmuv3: dynamically map PERF_COUNT_HW_BRANCH_INSTRUCTIONS
perf/arm-cmn: Validate cycles events fully
Revert "ARM: mach-virt: Select PMUv3 driver by default"
drivers/perf: apple_m1: Add Apple M2 support
dt-bindings: arm-pmu: Add PMU compatible strings for Apple M2 cores
perf: arm_cspmu: Fix variable dereference warning
perf/amlogic: Fix config1/config2 parsing issue
drivers/perf: Use devm_platform_get_and_ioremap_resource()
kbuild, drivers/perf: remove MODULE_LICENSE in non-modules
perf: qcom: Use devm_platform_get_and_ioremap_resource()
perf: arm: Use devm_platform_get_and_ioremap_resource()
perf/arm-cmn: Move overlapping wp_combine field
ARM: mach-virt: Select PMUv3 driver by default
ARM: perf: Allow the use of the PMUv3 driver on 32bit ARM
ARM: Make CONFIG_CPU_V7 valid for 32bit ARMv8 implementations
perf: pmuv3: Change GENMASK to GENMASK_ULL
...
|
|
ath.git patches for v6.4. Major changes:
wcn36xx
* support for pronto v3 hardware
ath11k
* PCIe DeviceTree bindings
* WCN6750: enable SAR support
ath10k
* convert DeviceTree bindings to YAML
|
|
It would be better to use the dedicated slab to store path.
Signed-off-by: Wu Bo <bo.wu@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Although pKVM supports CPU PMU emulation for non-protected guests since
722625c6f4c5 ("KVM: arm64: Reenable pmu in Protected Mode"), this relies
on the PMU driver probing before the host has de-privileged so that the
'kvm_arm_pmu_available' static key can still be enabled by patching the
hypervisor text.
As it happens, both of these events hang off device_initcall() but the
PMU consistently won the race until 7755cec63ade ("arm64: perf: Move
PMUv3 driver to drivers/perf"). Since then, the host will fail to boot
when pKVM is enabled:
| hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available
| kvm [1]: nVHE hyp BUG at: [<ffff8000090366e0>] __kvm_nvhe_handle_host_mem_abort+0x270/0x284!
| kvm [1]: Cannot dump pKVM nVHE stacktrace: !CONFIG_PROTECTED_NVHE_STACKTRACE
| kvm [1]: Hyp Offset: 0xfffea41fbdf70000
| Kernel panic - not syncing: HYP panic:
| PS:a00003c9 PC:0000dbe04b0c66e0 ESR:00000000f2000800
| FAR:fffffbfffddfcf00 HPFAR:00000000010b0bf0 PAR:0000000000000000
| VCPU:0000000000000000
| CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7-00083-g0bce6746d154 #1
| Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
| Call trace:
| dump_backtrace+0xec/0x108
| show_stack+0x18/0x2c
| dump_stack_lvl+0x50/0x68
| dump_stack+0x18/0x24
| panic+0x13c/0x33c
| nvhe_hyp_panic_handler+0x10c/0x190
| aarch64_insn_patch_text_nosync+0x64/0xc8
| arch_jump_label_transform+0x4c/0x5c
| __jump_label_update+0x84/0xfc
| jump_label_update+0x100/0x134
| static_key_enable_cpuslocked+0x68/0xac
| static_key_enable+0x20/0x34
| kvm_host_pmu_init+0x88/0xa4
| armpmu_register+0xf0/0xf4
| arm_pmu_acpi_probe+0x2ec/0x368
| armv8_pmu_driver_init+0x38/0x44
| do_one_initcall+0xcc/0x240
Fix the race properly by deferring the de-privilege step to
device_initcall_sync(). This will also be needed in future when probing
IOMMU devices and allows us to separate the pKVM de-privilege logic from
the core hypervisor initialisation path.
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Fixes: 7755cec63ade ("arm64: perf: Move PMUv3 driver to drivers/perf")
Tested-by: Fuad Tabba <tabba@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230420123356.2708-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Last minute patch for correct the pasue/resume operation with IPC4. The
issues are hardto reproduce and needs extended stress testing to be hit,
in which case the audio breaks due to DMA errors.
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Simplify IPC messages to avoid passing a reply structure that is not
used later.
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Preparation of ALC712 support with different types of SoundWire
devices per link, new RaptorLake SoundWire device, better error
handling for Cirrus devices and cosmetic changes for Max98373.
Bard Liao (3):
ASoC: Intel: sof_sdw: set codec_num = 1 if the device is not
aggregated
ASoC: Intel: sof_sdw: support different devices on the same sdw link
ASoC: Intel: sof_sdw: append codec type to dai link name
Curtis Malainey (1):
ASoC: Intel: sof_cirrus_common: Guard against missing buses
Yong Zhi (2):
ASoC: Intel: sof_sdw: remove late_probe flag in struct
sof_sdw_codec_info
ASoC: Intel: sof_sdw_max98373: change sof_sdw_mx8373_late_probe to
static call
apoorv (1):
ASoC: Intel: soc-acpi: Add entry for rt711-sdca-sdw at link 2 in RPL
match table
sound/soc/intel/boards/sof_cirrus_common.c | 7 +-
sound/soc/intel/boards/sof_sdw.c | 181 ++++++++++++------
sound/soc/intel/boards/sof_sdw_common.h | 3 -
sound/soc/intel/boards/sof_sdw_max98373.c | 22 +--
.../intel/common/soc-acpi-intel-rpl-match.c | 17 +-
5 files changed, 152 insertions(+), 78 deletions(-)
--
2.37.2
|
|
When wx_alloc_page_pool() failed in wx_setup_rx_resources(), it doesn't
release DMA buffer. Add dma_free_coherent() in the error path to release
the DMA buffer.
Fixes: 850b971110b2 ("net: libwx: Allocate Rx and Tx resources")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230418065450.2268522-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 2d786e66c966 ("block: ublk: switch to ioctl command encoding")
starts to reset local variable of 'ret' as zero, then if any failure
happens when handling the three IO commands, 0 can be returned to ublk
server.
Fix it by returning -EINVAL in case of command handling failure.
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 2d786e66c966 ("block: ublk: switch to ioctl command encoding")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230420091104.1092972-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 23f3e3272e7a4d9fb870485cd6df1e4f9539282c.
blk-mq sched bio merge still needs request to grab queue usage counter,
so we can't simply call blk_mq_attempt_bio_merge() when queue usage
counter isn't held.
Fixes: 23f3e3272e7a ("block: Merge bio before checking ->cached_rq")
Cc: Xiao Ni <xni@redhat.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230420112018.1108058-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
mt76 patches for 6.4
- fixes
- connac code unification
- mt7921 p2p support
- mt7996 mesh a-msdu support
- mt7996 eht support
- mt7996 coredump support
|
|
This reverts commit edd478269640b360c6f301f2baa04abdda563ef3.
There's really no specific need to disallow multiple sources of buffers,
and io_uring really should not be mandating this by itself. We should
be able to solely rely on GUP making these decisions.
As this also stands in the way of a cleanup where io_uring is the odd
one out, kill it.
Link: https://lore.kernel.org/all/61ded378-51a8-1dcb-b631-fda1903248a9@gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Update spelling in comments in main.h
Found by inspection.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230418-rtw88-starspell-v1-1-70e52a23979b@kernel.org
|
|
This driver does not actually use the ISA DMA API, it is purely
PIO based, so remove the dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230417205131.1560074-1-arnd@kernel.org
|
|
The goal of writing 0x6954341e / 0x6955341e to REG_OFDM0_XA_AGC_CORE1
appears to be setting the initial gain, which is stored in bits 0..6.
Bits 7..31 are the same as what the phy init tables write.
Modify only bits 0..6 so that we don't have to care about the values
of the others. This way we don't have to add another "else if" for the
RTL8192FU.
Why we need to change the initial gain from the default 0x20 to 0x1e?
Not sure. Some of the vendor drivers change it to 0x1e before scanning
and then restore it to the original value after.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/cf91ca69-70e3-4c20-c0b1-e59d452356a1@gmail.com
|
|
Also add rtl8xxxu_write32_mask, rtl8xxxu_write_rfreg_mask.
These helper functions make it easier to modify only parts of a register
by eliminating the call to the register reading function and the bit
manipulations.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/9430b841-1048-b27c-14ec-fca447dc32af@gmail.com
|
|
Most devices have a vendor name, product name, and serial number in the
efuse, but it's pretty useless. It duplicates the information already
printed by the USB subsystem:
usb 1-4: New USB device found, idVendor=0bda, idProduct=8178, bcdDevice= 2.00
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: 802.11n WLAN Adapter
usb 1-4: Manufacturer: Realtek
usb 1-4: SerialNumber: 00e04c000001
-> usb 1-4: Vendor: Realtek
-> usb 1-4: Product: 802.11n WLAN Adapter
usb 1-4: New USB device found, idVendor=0bda, idProduct=818b, bcdDevice= 2.00
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: 802.11n NIC
usb 1-4: Manufacturer: Realtek
usb 1-4: SerialNumber: 00e04c000001
-> usb 1-4: Vendor: Realtek
-> usb 1-4: Product: 802.11n NIC
-> usb 1-4: Serial not available.
usb 1-4: New USB device found, idVendor=0bda, idProduct=f179, bcdDevice= 0.00
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: 802.11n
usb 1-4: Manufacturer: Realtek
usb 1-4: SerialNumber: 002E2DC0041F
-> usb 1-4: Vendor: Realtek
-> usb 1-4: Product: 802.11n
usb 1-4: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: 802.11n NIC
usb 1-4: Manufacturer: Realtek
usb 1-4: SerialNumber: 00E04C0001
-> usb 1-4: Vendor: Realtek
-> usb 1-4: Product: 802.11n NIC
-> usb 1-4: Serial: 00E04C0001
Also, that data is not interpreted correctly in all cases:
usb 3-1.1.2: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
usb 3-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.1.2: Product: 802.11n NIC
usb 3-1.1.2: Manufacturer: Realtek
usb 3-1.1.2: Vendor: Realtek
usb 3-1.1.2: Product: \x03802.11n NI
usb 3-1.1.2: Serial: \xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217231
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/a2a7d9df-0529-7890-3522-48dce613753f@gmail.com
|
|
Kmemleak shows the following leak arising from routine in the usb
probe routine:
unreferenced object 0xffff895cb29bba00 (size 512):
comm "(udev-worker)", pid 534, jiffies 4294903932 (age 102751.088s)
hex dump (first 32 bytes):
77 30 30 30 00 00 00 00 02 2f 2d 2b 30 00 00 00 w000...../-+0...
02 00 2a 28 00 00 00 00 ff 55 ff ff ff 00 00 00 ..*(.....U......
backtrace:
[<ffffffff9265fa36>] kmalloc_trace+0x26/0x90
[<ffffffffc17eec41>] rtw_usb_probe+0x2f1/0x680 [rtw_usb]
[<ffffffffc03e19fd>] usb_probe_interface+0xdd/0x2e0 [usbcore]
[<ffffffff92b4f2fe>] really_probe+0x18e/0x3d0
[<ffffffff92b4f5b8>] __driver_probe_device+0x78/0x160
[<ffffffff92b4f6bf>] driver_probe_device+0x1f/0x90
[<ffffffff92b4f8df>] __driver_attach+0xbf/0x1b0
[<ffffffff92b4d350>] bus_for_each_dev+0x70/0xc0
[<ffffffff92b4e51e>] bus_add_driver+0x10e/0x210
[<ffffffff92b50935>] driver_register+0x55/0xf0
[<ffffffffc03e0708>] usb_register_driver+0x88/0x140 [usbcore]
[<ffffffff92401153>] do_one_initcall+0x43/0x210
[<ffffffff9254f42a>] do_init_module+0x4a/0x200
[<ffffffff92551d1c>] __do_sys_finit_module+0xac/0x120
[<ffffffff92ee6626>] do_syscall_64+0x56/0x80
[<ffffffff9300006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
The leak was verified to be real by unloading the driver, which resulted
in a dangling pointer to the allocation.
The allocated memory is freed in rtw_usb_intf_deinit().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230417160331.23071-1-Larry.Finger@lwfinger.net
|
|
We have to call rtw8821c_switch_rf_set() with SWITCH_TO_WLG or
SWITCH_TO_BTG according to the chip variant as denoted in rfe_option.
The information which argument to use for which variant has been
taken from the vendor driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230417140358.2240429-5-s.hauer@pengutronix.de
|
|
According to the vendor driver the pkg_type has to be set to '1'
for some rtw8821c variants. As the pkg_type has been hardcoded to
'0', add a field for it in struct rtw_hal and set this correctly
in the rtw8821c part.
With this parsing of a rtw_table is influenced and check_positive()
in phy.c returns true for some cases here. The same is done in the
vendor driver. However, this has no visible effect on the driver
here.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230417140358.2240429-4-s.hauer@pengutronix.de
|
|
On my RTW8821CU chipset rfe_option reads as 0x22. Looking at the
vendor driver suggests that the field width of rfe_option is 5 bit,
so rfe_option should be masked with 0x1f.
Without this the rfe_option comparisons with 2 further down the
driver evaluate as false when they should really evaluate as true.
The effect is that 2G channels do not work.
rfe_option is also used as an array index into rtw8821c_rfe_defs[].
rtw8821c_rfe_defs[34] (0x22) was added as part of adding USB support,
likely because rfe_option reads as 0x22. As this now becomes 0x2,
rtw8821c_rfe_defs[34] is no longer used and can be removed.
Note that this might not be the whole truth. In the vendor driver
there are indeed places where the unmasked rfe_option value is used.
However, the driver has several places where rfe_option is tested
with the pattern if (rfe_option == 2 || rfe_option == 0x22) or
if (rfe_option == 4 || rfe_option == 0x24), so that rfe_option BIT(5)
has no influence on the code path taken. We therefore mask BIT(5)
out from rfe_option entirely until this assumption is proved wrong
by some chip variant we do not know yet.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Alexandru gagniuc <mr.nuke.me@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: ValdikSS <iam@valdikss.org.ru>
Cc: stable@vger.kernel.org
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230417140358.2240429-3-s.hauer@pengutronix.de
|
|
The RTW88 chipsets have four different priority queues in hardware. For
the USB type chipsets the packets destined for a specific priority queue
must be sent through the endpoint corresponding to the queue. This was
not fully understood when porting from the RTW88 USB out of tree driver
and thus violated.
This patch implements the qsel to endpoint mapping as in
get_usb_bulkout_id_88xx() in the downstream driver.
Without this the driver often issues "timed out to flush queue 3"
warnings and often TX stalls completely.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: ValdikSS <iam@valdikss.org.ru>
Tested-by: Alexandru gagniuc <mr.nuke.me@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable@vger.kernel.org
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230417140358.2240429-2-s.hauer@pengutronix.de
|
