summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-03-29udp: do not accept non-tunnel GSO skbs landing in a tunnelAntoine Tenart
When rx-udp-gro-forwarding is enabled UDP packets might be GROed when being forwarded. If such packets might land in a tunnel this can cause various issues and udp_gro_receive makes sure this isn't the case by looking for a matching socket. This is performed in udp4/6_gro_lookup_skb but only in the current netns. This is an issue with tunneled packets when the endpoint is in another netns. In such cases the packets will be GROed at the UDP level, which leads to various issues later on. The same thing can happen with rx-gro-list. We saw this with geneve packets being GROed at the UDP level. In such case gso_size is set; later the packet goes through the geneve rx path, the geneve header is pulled, the offset are adjusted and frag_list skbs are not adjusted with regard to geneve. When those skbs hit skb_fragment, it will misbehave. Different outcomes are possible depending on what the GROed skbs look like; from corrupted packets to kernel crashes. One example is a BUG_ON[1] triggered in skb_segment while processing the frag_list. Because gso_size is wrong (geneve header was pulled) skb_segment thinks there is "geneve header size" of data in frag_list, although it's in fact the next packet. The BUG_ON itself has nothing to do with the issue. This is only one of the potential issues. Looking up for a matching socket in udp_gro_receive is fragile: the lookup could be extended to all netns (not speaking about performances) but nothing prevents those packets from being modified in between and we could still not find a matching socket. It's OK to keep the current logic there as it should cover most cases but we also need to make sure we handle tunnel packets being GROed too early. This is done by extending the checks in udp_unexpected_gso: GSO packets lacking the SKB_GSO_UDP_TUNNEL/_CSUM bits and landing in a tunnel must be segmented. [1] kernel BUG at net/core/skbuff.c:4408! RIP: 0010:skb_segment+0xd2a/0xf70 __udp_gso_segment+0xaa/0x560 Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.") Fixes: 36707061d6ba ("udp: allow forwarding of plain (non-fraglisted) UDP GRO packets") Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-29net: hsr: Use full string description when opening HSR network deviceLukasz Majewski
Up till now only single character ('A' or 'B') was used to provide information of HSR slave network device status. As it is also possible and valid, that Interlink network device may be supported as well, the description must be more verbose. As a result the full string description is now used. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-29ASoC: tas2781: mark dvc_tlv with __maybe_unusedGergo Koteles
Since we put dvc_tlv static variable to a header file it's copied to each module that includes the header. But not all of them are actually used it. Fix this W=1 build warning: include/sound/tas2781-tlv.h:18:35: warning: 'dvc_tlv' defined but not used [-Wunused-const-variable=] Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202403290354.v0StnRpc-lkp@intel.com/ Fixes: ae065d0ce9e3 ("ALSA: hda/tas2781: remove digital gain kcontrol") Signed-off-by: Gergo Koteles <soyer@irl.hu> Message-ID: <0e461545a2a6e9b6152985143e50526322e5f76b.1711665731.git.soyer@irl.hu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-03-29arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix USB vbus regulatorTim Harvey
When using usb-conn-gpio to control USB role and VBUS, the vbus-supply property must be present in the usb-conn-gpio node. Additionally it should not be present in the phy node as that isn't what controls vbus and will upset the use count. This resolves an issue where VBUS is enabled with OTG in peripheral mode. Fixes: ad9a12f7a522 ("arm64: dts: imx8mp-venice: Fix USB connector description") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-03-29arm64: dts: freescale: imx8mp-venice-gw72xx-2x: fix USB vbus regulatorTim Harvey
When using usb-conn-gpio to control USB role and VBUS, the vbus-supply property must be present in the usb-conn-gpio node. Additionally it should not be present in the phy node as that isn't what controls vbus and will upset the use count. This resolves an issue where VBUS is enabled with OTG in peripheral mode. Fixes: ad9a12f7a522 ("arm64: dts: imx8mp-venice: Fix USB connector description") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-03-28tools/resolve_btfids: fix build with musl libcNatanael Copa
Include the header that defines u32. This fixes build of 6.6.23 and 6.1.83 kernels for Alpine Linux, which uses musl libc. I assume that GNU libc indirecly pulls in linux/types.h. Fixes: 9707ac4fe2f5 ("tools/resolve_btfids: Refactor set sorting with types from btf_ids.h") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218647 Cc: stable@vger.kernel.org Signed-off-by: Natanael Copa <ncopa@alpinelinux.org> Tested-by: Greg Thelen <gthelen@google.com> Link: https://lore.kernel.org/r/20240328110103.28734-1-ncopa@alpinelinux.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-03-28Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-03-27 (e1000e) This series contains updates to e1000e driver only. Vitaly adds retry mechanism for some PHY operations to workaround MDI error and moves SMBus configuration to avoid possible PHY loss. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue e1000e: Workaround for sporadic MDI error on Meteor Lake systems ==================== Link: https://lore.kernel.org/r/20240327185517.2587564-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-28bpf: support deferring bpf_link dealloc to after RCU grace periodAndrii Nakryiko
BPF link for some program types is passed as a "context" which can be used by those BPF programs to look up additional information. E.g., for multi-kprobes and multi-uprobes, link is used to fetch BPF cookie values. Because of this runtime dependency, when bpf_link refcnt drops to zero there could still be active BPF programs running accessing link data. This patch adds generic support to defer bpf_link dealloc callback to after RCU GP, if requested. This is done by exposing two different deallocation callbacks, one synchronous and one deferred. If deferred one is provided, bpf_link_free() will schedule dealloc_deferred() callback to happen after RCU GP. BPF is using two flavors of RCU: "classic" non-sleepable one and RCU tasks trace one. The latter is used when sleepable BPF programs are used. bpf_link_free() accommodates that by checking underlying BPF program's sleepable flag, and goes either through normal RCU GP only for non-sleepable, or through RCU tasks trace GP *and* then normal RCU GP (taking into account rcu_trace_implies_rcu_gp() optimization), if BPF program is sleepable. We use this for multi-kprobe and multi-uprobe links, which dereference link during program run. We also preventively switch raw_tp link to use deferred dealloc callback, as upcoming changes in bpf-next tree expose raw_tp link data (specifically, cookie value) to BPF program at runtime as well. Fixes: 0dcac2725406 ("bpf: Add multi kprobe link") Fixes: 89ae89f53d20 ("bpf: Add multi uprobe link") Reported-by: syzbot+981935d9485a560bfbcb@syzkaller.appspotmail.com Reported-by: syzbot+2cb5a6c573e98db598cc@syzkaller.appspotmail.com Reported-by: syzbot+62d8b26793e8a2bd0516@syzkaller.appspotmail.com Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20240328052426.3042617-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-03-28bpf: put uprobe link's path and task in release callbackAndrii Nakryiko
There is no need to delay putting either path or task to deallocation step. It can be done right after bpf_uprobe_unregister. Between release and dealloc, there could be still some running BPF programs, but they don't access either task or path, only data in link->uprobes, so it is safe to do. On the other hand, doing path_put() in dealloc callback makes this dealloc sleepable because path_put() itself might sleep. Which is problematic due to the need to call uprobe's dealloc through call_rcu(), which is what is done in the next bug fix patch. So solve the problem by releasing these resources early. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20240328052426.3042617-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-03-29ASoC: rt-sdw: fix locking and improve error logsMark Brown
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Fix a set of problematic locking sequences and update error messages, tested on SOF/SoundWire platforms.
2024-03-28xen-netfront: Add missing skb_mark_for_recycleJesper Dangaard Brouer
Notice that skb_mark_for_recycle() is introduced later than fixes tag in commit 6a5bcd84e886 ("page_pool: Allow drivers to hint on SKB recycling"). It is believed that fixes tag were missing a call to page_pool_release_page() between v5.9 to v5.14, after which is should have used skb_mark_for_recycle(). Since v6.6 the call page_pool_release_page() were removed (in commit 535b9c61bdef ("net: page_pool: hide page_pool_release_page()") and remaining callers converted (in commit 6bfef2ec0172 ("Merge branch 'net-page_pool-remove-page_pool_release_page'")). This leak became visible in v6.8 via commit dba1b8a7ab68 ("mm/page_pool: catch page_pool memory leaks"). Cc: stable@vger.kernel.org Fixes: 6c5aa6fc4def ("xen networking: add basic XDP support for xen-netfront") Reported-by: Leonidas Spyropoulos <artafinde@archlinux.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=218654 Reported-by: Arthur Borsboom <arthurborsboom@gmail.com> Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/171154167446.2671062.9127105384591237363.stgit@firesoul Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-28ptp: MAINTAINERS: drop Jeff SipekKrzysztof Kozlowski
Emails to Jeff Sipek bounce: Your message to jsipek@vmware.com couldn't be delivered. Recipient is not authorized to accept external mail Status code: 550 5.7.1_ETR Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240327081413.306054-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-28Documentation: Add documentation for eswitch attributeWilliam Tu
Provide devlink documentation for three eswitch attributes: mode, inline-mode, and encap-mode. Signed-off-by: William Tu <witu@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20240325181228.6244-1-witu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-28Merge tag 'mmc-v6.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix regression for the mmc ioctl MMC host: - sdhci-of-dwcmshc: Fixup PM support in ->remove_new() - sdhci-omap: Re-tune when device became runtime suspended" * tag 'mmc-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: sdhci-of-dwcmshc: disable PM runtime in dwcmshc_remove() mmc: sdhci-omap: re-tuning is needed after a pm transition to support emmc HS200 mode mmc: core: Avoid negative index with array access mmc: core: Initialize mmc_blk_ioc_data
2024-03-28block: Do not force full zone append completion in req_bio_endio()Damien Le Moal
This reverts commit 748dc0b65ec2b4b7b3dbd7befcc4a54fdcac7988. Partial zone append completions cannot be supported as there is no guarantees that the fragmented data will be written sequentially in the same manner as with a full command. Commit 748dc0b65ec2 ("block: fix partial zone append completion handling in req_bio_endio()") changed req_bio_endio() to always advance a partially failed BIO by its full length, but this can lead to incorrect accounting. So revert this change and let low level device drivers handle this case by always failing completely zone append operations. With this revert, users will still see an IO error for a partially completed zone append BIO. Fixes: 748dc0b65ec2 ("block: fix partial zone append completion handling in req_bio_endio()") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240328004409.594888-2-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-28cache: sifive_ccache: Partially convert to a platform driverSamuel Holland
Commit 8ec99b033147 ("irqchip/sifive-plic: Convert PLIC driver into a platform driver") broke ccache initialization because the PLIC IRQ domain is no longer available during an arch_initcall: [ 0.087229] irq: no irq domain found for interrupt-controller@c000000 ! [ 0.087255] CCACHE: Could not request IRQ 0 Fix this by moving the IRQ handling code to a platform driver. Fixes: 8ec99b033147 ("irqchip/sifive-plic: Convert PLIC driver into a platform driver") Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-03-28ASoC: ops: Fix wraparound for mask in snd_soc_get_volswStephen Lee
In snd_soc_info_volsw(), mask is generated by figuring out the index of the most significant bit set in max and converting the index to a bitmask through bit shift 1. Unintended wraparound occurs when max is an integer value with msb bit set. Since the bit shift value 1 is treated as an integer type, the left shift operation will wraparound and set mask to 0 instead of all 1's. In order to fix this, we type cast 1 as `1ULL` to prevent the wraparound. Fixes: 7077148fb50a ("ASoC: core: Split ops out of soc-core.c") Signed-off-by: Stephen Lee <slee08177@gmail.com> Link: https://msgid.link/r/20240326010131.6211-1-slee08177@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-28Merge tag 'sound-6.9-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of device-specific small fixes: a series of fixes for TAS2781 HD-audio codec, ASoC SOF, Cirrus CS35L56 and a couple of legacy drivers" * tag 'sound-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/tas2781: remove useless dev_dbg from playback_hook ALSA: hda/tas2781: add debug statements to kcontrols ALSA: hda/tas2781: add locks to kcontrols ALSA: hda/tas2781: remove digital gain kcontrol ALSA: aoa: avoid false-positive format truncation warning ALSA: sh: aica: reorder cleanup operations to avoid UAF bugs ALSA: hda: cs35l56: Set the init_done flag before component_add() ALSA: hda: cs35l56: Raise device name message log level ASoC: SOF: ipc4-topology: support NHLT device type ALSA: hda: intel-nhlt: add intel_nhlt_ssp_device_type() function
2024-03-28Merge tag 'iommu-fixes-v6.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "ARM SMMU fixes: - Fix swabbing of the STE fields in the unlikely event of running on a big-endian machine - Fix setting of STE.SHCFG on hardware that doesn't implement support for attribute overrides IOMMU core: - PASID validation fix in device attach path" * tag 'iommu-fixes-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Validate the PASID in iommu_attach_device_pasid() iommu/arm-smmu-v3: Fix access for STE.SHCFG iommu/arm-smmu-v3: Add cpu_to_le64() around STRTAB_STE_0_V
2024-03-28Merge tag 'nfsd-6.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Address three recently introduced regressions * tag 'nfsd-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: NFSD: CREATE_SESSION must never cache NFS4ERR_DELAY replies SUNRPC: Revert 561141dd494382217bace4d1a51d08168420eace nfsd: Fix error cleanup path in nfsd_rename()
2024-03-28Merge tag 'net-6.9-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf, WiFi and netfilter. Current release - regressions: - ipv6: fix address dump when IPv6 is disabled on an interface Current release - new code bugs: - bpf: temporarily disable atomic operations in BPF arena - nexthop: fix uninitialized variable in nla_put_nh_group_stats() Previous releases - regressions: - bpf: protect against int overflow for stack access size - hsr: fix the promiscuous mode in offload mode - wifi: don't always use FW dump trig - tls: adjust recv return with async crypto and failed copy to userspace - tcp: properly terminate timers for kernel sockets - ice: fix memory corruption bug with suspend and rebuild - at803x: fix kernel panic with at8031_probe - qeth: handle deferred cc1 Previous releases - always broken: - bpf: fix bug in BPF_LDX_MEMSX - netfilter: reject table flag and netdev basechain updates - inet_defrag: prevent sk release while still in use - wifi: pick the version of SESSION_PROTECTION_NOTIF - wwan: t7xx: split 64bit accesses to fix alignment issues - mlxbf_gige: call request_irq() after NAPI initialized - hns3: fix kernel crash when devlink reload during pf initialization" * tag 'net-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits) inet: inet_defrag: prevent sk release while still in use Octeontx2-af: fix pause frame configuration in GMP mode net: lan743x: Add set RFE read fifo threshold for PCI1x1x chips net: bcmasp: Remove phy_{suspend/resume} net: bcmasp: Bring up unimac after PHY link up net: phy: qcom: at803x: fix kernel panic with at8031_probe netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c netfilter: nf_tables: skip netdev hook unregistration if table is dormant netfilter: nf_tables: reject table flag and netdev basechain updates netfilter: nf_tables: reject destroy command to remove basechain hooks bpf: update BPF LSM designated reviewer list bpf: Protect against int overflow for stack access size bpf: Check bloom filter map value size bpf: fix warning for crash_kexec selftests: netdevsim: set test timeout to 10 minutes net: wan: framer: Add missing static inline qualifiers mlxbf_gige: call request_irq() after NAPI initialized tls: get psock ref after taking rxlock to avoid leak selftests: tls: add test with a partially invalid iov tls: adjust recv return with async crypto and failed copy to userspace ...
2024-03-28ASoC: rt-sdw*: add __func__ to all error logsPierre-Louis Bossart
The drivers for Realtek SoundWire codecs use similar logs, which is problematic to analyze problems reported by CI tools, e.g. "Failed to get private value: 752001 => 0000 ret=-5". It's not uncommon to have several Realtek devices on the same platform, having the same log thrown makes support difficult. This patch adds __func__ to all error logs which didn't already include it. No functionality change, only error logs are modified. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://msgid.link/r/20240325221817.206465-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-28ASoC: rt722-sdca-sdw: fix locking sequencePierre-Louis Bossart
The disable_irq_lock protects the 'disable_irq' value, we need to lock before testing it. Fixes: a0b7c59ac1a9 ("ASoC: rt722-sdca: fix for JD event handling in ClockStop Mode0") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Chao Song <chao.song@linux.intel.com> Link: https://msgid.link/r/20240325221817.206465-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-28ASoC: rt712-sdca-sdw: fix locking sequencePierre-Louis Bossart
The disable_irq_lock protects the 'disable_irq' value, we need to lock before testing it. Fixes: 7a8735c1551e ("ASoC: rt712-sdca: fix for JD event handling in ClockStop Mode0") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Chao Song <chao.song@linux.intel.com> Link: https://msgid.link/r/20240325221817.206465-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-28ASoC: rt711-sdw: fix locking sequencePierre-Louis Bossart
The disable_irq_lock protects the 'disable_irq' value, we need to lock before testing it. Fixes: b69de265bd0e ("ASoC: rt711: fix for JD event handling in ClockStop Mode0") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Chao Song <chao.song@linux.intel.com> Link: https://msgid.link/r/20240325221817.206465-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-28ASoC: rt711-sdca: fix locking sequencePierre-Louis Bossart
The disable_irq_lock protects the 'disable_irq' value, we need to lock before testing it. Fixes: 23adeb7056ac ("ASoC: rt711-sdca: fix for JD event handling in ClockStop Mode0") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Chao Song <chao.song@linux.intel.com> Link: https://msgid.link/r/20240325221817.206465-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-28ASoC: rt5682-sdw: fix locking sequencePierre-Louis Bossart
The disable_irq_lock protects the 'disable_irq' value, we need to lock before testing it. Fixes: 02fb23d72720 ("ASoC: rt5682-sdw: fix for JD event handling in ClockStop Mode0") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Chao Song <chao.song@linux.intel.com> Link: https://msgid.link/r/20240325221817.206465-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-29Merge tag 'drm-misc-fixes-2024-03-28' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes Short summary of fixes pull: bridge: - select DRM_KMS_HELPER dma-buf: - fix NULL-pointer deref dp: - fix div-by-zero in DP MST unplug code fbdev: - select FB_IOMEM_FOPS for SBus nouveau: - dmem: handle kcalloc() allocation failures qxl: - remove unused variables rockchip: - vop2: remove support for AR30 and AB30 formats sched: - fix NULL-pointer deref vmwgfx: - debugfs: create ttm_resource_manager entry only if needed Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240328134417.GA8673@localhost.localdomain
2024-03-28drm/prime: Unbreak virtgpu dma-buf exportRob Clark
virtgpu "vram" GEM objects do not implement obj->get_sg_table(). But they also don't use drm_gem_map_dma_buf(). In fact they may not even have guest visible pages. But it is perfectly fine to export and share with other virtual devices. Reported-by: Dominik Behr <dbehr@chromium.org> Fixes: 207395da5a97 ("drm/prime: reject DMA-BUF attach when get_sg_table is missing") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Simon Ser <contact@emersion.fr> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20240322214801.319975-1-robdclark@gmail.com
2024-03-28kunit: configs: Enable CONFIG_DAMON_DBGFS_DEPRECATED for --alltestsDavid Gow
This is required, as CONFIG_DAMON_DEBUGFS is enabled, and --alltests UML builds will fail due to the missing config option otherwise. Fixes: f4cba4bf6777 ("mm/damon: rename CONFIG_DAMON_DBGFS to DAMON_DBGFS_DEPRECATED") Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Rae Moar <rmoar@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-03-28nouveau/uvmm: fix addr/range calcs for remap operationsDave Airlie
dEQP-VK.sparse_resources.image_rebind.2d_array.r64i.128_128_8 was causing a remap operation like the below. op_remap: prev: 0000003fffed0000 00000000000f0000 00000000a5abd18a 0000000000000000 op_remap: next: op_remap: unmap: 0000003fffed0000 0000000000100000 0 op_map: map: 0000003ffffc0000 0000000000010000 000000005b1ba33c 00000000000e0000 This was resulting in an unmap operation from 0x3fffed0000+0xf0000, 0x100000 which was corrupting the pagetables and oopsing the kernel. Fixes the prev + unmap range calcs to use start/end and map back to addr/range. Signed-off-by: Dave Airlie <airlied@redhat.com> Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI") Cc: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240328024317.2041851-1-airlied@gmail.com
2024-03-28drm/nouveau/gr/gf100: Remove second semicolonColin Ian King
There is a statement with two semicolons. Remove the second one, it is redundant. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240315090930.2429958-1-colin.i.king@gmail.com
2024-03-28drm/panfrost: fix power transition timeout warningsChristian Hewitt
Increase the timeout value to prevent system logs on Amlogic boards flooding with power transition warnings: [ 13.047638] panfrost ffe40000.gpu: shader power transition timeout [ 13.048674] panfrost ffe40000.gpu: l2 power transition timeout [ 13.937324] panfrost ffe40000.gpu: shader power transition timeout [ 13.938351] panfrost ffe40000.gpu: l2 power transition timeout ... [39829.506904] panfrost ffe40000.gpu: shader power transition timeout [39829.507938] panfrost ffe40000.gpu: l2 power transition timeout [39949.508369] panfrost ffe40000.gpu: shader power transition timeout [39949.509405] panfrost ffe40000.gpu: l2 power transition timeout The 2000 value has been found through trial and error testing with devices using G52 and G31 GPUs. Fixes: 22aa1a209018 ("drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off()") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240322164525.2617508-1-christianshewitt@gmail.com
2024-03-28drm/i915/bios: Tolerate devdata==NULL in ↵Ville Syrjälä
intel_bios_encoder_supports_dp_dual_mode() If we have no VBT, or the VBT didn't declare the encoder in question, we won't have the 'devdata' for the encoder. Instead of oopsing just bail early. We won't be able to tell whether the port is DP++ or not, but so be it. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10464 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240319092443.15769-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 26410896206342c8a80d2b027923e9ee7d33b733) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-28drm/i915: Pre-populate the cursor physical dma addressVille Syrjälä
Calling i915_gem_object_get_dma_address() from the vblank evade critical section triggers might_sleep(). While we know that we've already pinned the framebuffer and thus i915_gem_object_get_dma_address() will in fact not sleep in this case, it seems reasonable to keep the unconditional might_sleep() for maximum coverage. So let's instead pre-populate the dma address during fb pinning, which all happens before we enter the vblank evade critical section. We can use u32 for the dma address as this class of hardware doesn't support >32bit addresses. Cc: stable@vger.kernel.org Fixes: 0225a90981c8 ("drm/i915: Make cursor plane registers unlocked") Reported-by: Borislav Petkov <bp@alien8.de> Closes: https://lore.kernel.org/intel-gfx/20240227100342.GAZd2zfmYcPS_SndtO@fat_crate.local/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240325175738.3440-1-ville.syrjala@linux.intel.com Tested-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> (cherry picked from commit c1289a5c3594cf04caa94ebf0edeb50c62009f1f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-28drm/i915/gt: Reset queue_priority_hint on parkingChris Wilson
Originally, with strict in order execution, we could complete execution only when the queue was empty. Preempt-to-busy allows replacement of an active request that may complete before the preemption is processed by HW. If that happens, the request is retired from the queue, but the queue_priority_hint remains set, preventing direct submission until after the next CS interrupt is processed. This preempt-to-busy race can be triggered by the heartbeat, which will also act as the power-management barrier and upon completion allow us to idle the HW. We may process the completion of the heartbeat, and begin parking the engine before the CS event that restores the queue_priority_hint, causing us to fail the assertion that it is MIN. <3>[ 166.210729] __engine_park:283 GEM_BUG_ON(engine->sched_engine->queue_priority_hint != (-((int)(~0U >> 1)) - 1)) <0>[ 166.210781] Dumping ftrace buffer: <0>[ 166.210795] --------------------------------- ... <0>[ 167.302811] drm_fdin-1097 2..s1. 165741070us : trace_ports: 0000:00:02.0 rcs0: promote { ccid:20 1217:2 prio 0 } <0>[ 167.302861] drm_fdin-1097 2d.s2. 165741072us : execlists_submission_tasklet: 0000:00:02.0 rcs0: preempting last=1217:2, prio=0, hint=2147483646 <0>[ 167.302928] drm_fdin-1097 2d.s2. 165741072us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 1217:2, current 0 <0>[ 167.302992] drm_fdin-1097 2d.s2. 165741073us : __i915_request_submit: 0000:00:02.0 rcs0: fence 3:4660, current 4659 <0>[ 167.303044] drm_fdin-1097 2d.s1. 165741076us : execlists_submission_tasklet: 0000:00:02.0 rcs0: context:3 schedule-in, ccid:40 <0>[ 167.303095] drm_fdin-1097 2d.s1. 165741077us : trace_ports: 0000:00:02.0 rcs0: submit { ccid:40 3:4660* prio 2147483646 } <0>[ 167.303159] kworker/-89 11..... 165741139us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence c90:2, current 2 <0>[ 167.303208] kworker/-89 11..... 165741148us : __intel_context_do_unpin: 0000:00:02.0 rcs0: context:c90 unpin <0>[ 167.303272] kworker/-89 11..... 165741159us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence 1217:2, current 2 <0>[ 167.303321] kworker/-89 11..... 165741166us : __intel_context_do_unpin: 0000:00:02.0 rcs0: context:1217 unpin <0>[ 167.303384] kworker/-89 11..... 165741170us : i915_request_retire.part.0: 0000:00:02.0 rcs0: fence 3:4660, current 4660 <0>[ 167.303434] kworker/-89 11d..1. 165741172us : __intel_context_retire: 0000:00:02.0 rcs0: context:1216 retire runtime: { total:56028ns, avg:56028ns } <0>[ 167.303484] kworker/-89 11..... 165741198us : __engine_park: 0000:00:02.0 rcs0: parked <0>[ 167.303534] <idle>-0 5d.H3. 165741207us : execlists_irq_handler: 0000:00:02.0 rcs0: semaphore yield: 00000040 <0>[ 167.303583] kworker/-89 11..... 165741397us : __intel_context_retire: 0000:00:02.0 rcs0: context:1217 retire runtime: { total:325575ns, avg:0ns } <0>[ 167.303756] kworker/-89 11..... 165741777us : __intel_context_retire: 0000:00:02.0 rcs0: context:c90 retire runtime: { total:0ns, avg:0ns } <0>[ 167.303806] kworker/-89 11..... 165742017us : __engine_park: __engine_park:283 GEM_BUG_ON(engine->sched_engine->queue_priority_hint != (-((int)(~0U >> 1)) - 1)) <0>[ 167.303811] --------------------------------- <4>[ 167.304722] ------------[ cut here ]------------ <2>[ 167.304725] kernel BUG at drivers/gpu/drm/i915/gt/intel_engine_pm.c:283! <4>[ 167.304731] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <4>[ 167.304734] CPU: 11 PID: 89 Comm: kworker/11:1 Tainted: G W 6.8.0-rc2-CI_DRM_14193-gc655e0fd2804+ #1 <4>[ 167.304736] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022 <4>[ 167.304738] Workqueue: i915-unordered retire_work_handler [i915] <4>[ 167.304839] RIP: 0010:__engine_park+0x3fd/0x680 [i915] <4>[ 167.304937] Code: 00 48 c7 c2 b0 e5 86 a0 48 8d 3d 00 00 00 00 e8 79 48 d4 e0 bf 01 00 00 00 e8 ef 0a d4 e0 31 f6 bf 09 00 00 00 e8 03 49 c0 e0 <0f> 0b 0f 0b be 01 00 00 00 e8 f5 61 fd ff 31 c0 e9 34 fd ff ff 48 <4>[ 167.304940] RSP: 0018:ffffc9000059fce0 EFLAGS: 00010246 <4>[ 167.304942] RAX: 0000000000000200 RBX: 0000000000000000 RCX: 0000000000000006 <4>[ 167.304944] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000009 <4>[ 167.304946] RBP: ffff8881330ca1b0 R08: 0000000000000001 R09: 0000000000000001 <4>[ 167.304947] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8881330ca000 <4>[ 167.304948] R13: ffff888110f02aa0 R14: ffff88812d1d0205 R15: ffff88811277d4f0 <4>[ 167.304950] FS: 0000000000000000(0000) GS:ffff88844f780000(0000) knlGS:0000000000000000 <4>[ 167.304952] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 167.304953] CR2: 00007fc362200c40 CR3: 000000013306e003 CR4: 0000000000770ef0 <4>[ 167.304955] PKRU: 55555554 <4>[ 167.304957] Call Trace: <4>[ 167.304958] <TASK> <4>[ 167.305573] ____intel_wakeref_put_last+0x1d/0x80 [i915] <4>[ 167.305685] i915_request_retire.part.0+0x34f/0x600 [i915] <4>[ 167.305800] retire_requests+0x51/0x80 [i915] <4>[ 167.305892] intel_gt_retire_requests_timeout+0x27f/0x700 [i915] <4>[ 167.305985] process_scheduled_works+0x2db/0x530 <4>[ 167.305990] worker_thread+0x18c/0x350 <4>[ 167.305993] kthread+0xfe/0x130 <4>[ 167.305997] ret_from_fork+0x2c/0x50 <4>[ 167.306001] ret_from_fork_asm+0x1b/0x30 <4>[ 167.306004] </TASK> It is necessary for the queue_priority_hint to be lower than the next request submission upon waking up, as we rely on the hint to decide when to kick the tasklet to submit that first request. Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy") Closes: https://gitlab.freedesktop.org/drm/intel/issues/10154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240318135906.716055-2-janusz.krzysztofik@linux.intel.com (cherry picked from commit 98850e96cf811dc2d0a7d0af491caff9f5d49c1e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-28drm/i915/vma: Fix UAF on destroy against retire raceJanusz Krzysztofik
Object debugging tools were sporadically reporting illegal attempts to free a still active i915 VMA object when parking a GT believed to be idle. [161.359441] ODEBUG: free active (active state 0) object: ffff88811643b958 object type: i915_active hint: __i915_vma_active+0x0/0x50 [i915] [161.360082] WARNING: CPU: 5 PID: 276 at lib/debugobjects.c:514 debug_print_object+0x80/0xb0 ... [161.360304] CPU: 5 PID: 276 Comm: kworker/5:2 Not tainted 6.5.0-rc1-CI_DRM_13375-g003f860e5577+ #1 [161.360314] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022 [161.360322] Workqueue: i915-unordered __intel_wakeref_put_work [i915] [161.360592] RIP: 0010:debug_print_object+0x80/0xb0 ... [161.361347] debug_object_free+0xeb/0x110 [161.361362] i915_active_fini+0x14/0x130 [i915] [161.361866] release_references+0xfe/0x1f0 [i915] [161.362543] i915_vma_parked+0x1db/0x380 [i915] [161.363129] __gt_park+0x121/0x230 [i915] [161.363515] ____intel_wakeref_put_last+0x1f/0x70 [i915] That has been tracked down to be happening when another thread is deactivating the VMA inside __active_retire() helper, after the VMA's active counter has been already decremented to 0, but before deactivation of the VMA's object is reported to the object debugging tool. We could prevent from that race by serializing i915_active_fini() with __active_retire() via ref->tree_lock, but that wouldn't stop the VMA from being used, e.g. from __i915_vma_retire() called at the end of __active_retire(), after that VMA has been already freed by a concurrent i915_vma_destroy() on return from the i915_active_fini(). Then, we should rather fix the issue at the VMA level, not in i915_active. Since __i915_vma_parked() is called from __gt_park() on last put of the GT's wakeref, the issue could be addressed by holding the GT wakeref long enough for __active_retire() to complete before that wakeref is released and the GT parked. I believe the issue was introduced by commit d93939730347 ("drm/i915: Remove the vma refcount") which moved a call to i915_active_fini() from a dropped i915_vma_release(), called on last put of the removed VMA kref, to i915_vma_parked() processing path called on last put of a GT wakeref. However, its visibility to the object debugging tool was suppressed by a bug in i915_active that was fixed two weeks later with commit e92eb246feb9 ("drm/i915/active: Fix missing debug object activation"). A VMA associated with a request doesn't acquire a GT wakeref by itself. Instead, it depends on a wakeref held directly by the request's active intel_context for a GT associated with its VM, and indirectly on that intel_context's engine wakeref if the engine belongs to the same GT as the VMA's VM. Those wakerefs are released asynchronously to VMA deactivation. Fix the issue by getting a wakeref for the VMA's GT when activating it, and putting that wakeref only after the VMA is deactivated. However, exclude global GTT from that processing path, otherwise the GPU never goes idle. Since __i915_vma_retire() may be called from atomic contexts, use async variant of wakeref put. Also, to avoid circular locking dependency, take care of acquiring the wakeref before VM mutex when both are needed. v7: Add inline comments with justifications for: - using untracked variants of intel_gt_pm_get/put() (Nirmoy), - using async variant of _put(), - not getting the wakeref in case of a global GTT, - always getting the first wakeref outside vm->mutex. v6: Since __i915_vma_active/retire() callbacks are not serialized, storing a wakeref tracking handle inside struct i915_vma is not safe, and there is no other good place for that. Use untracked variants of intel_gt_pm_get/put_async(). v5: Replace "tile" with "GT" across commit description (Rodrigo), - avoid mentioning multi-GT case in commit description (Rodrigo), - explain why we need to take a temporary wakeref unconditionally inside i915_vma_pin_ww() (Rodrigo). v4: Refresh on top of commit 5e4e06e4087e ("drm/i915: Track gt pm wakerefs") (Andi), - for more easy backporting, split out removal of former insufficient workarounds and move them to separate patches (Nirmoy). - clean up commit message and description a bit. v3: Identify root cause more precisely, and a commit to blame, - identify and drop former workarounds, - update commit message and description. v2: Get the wakeref before VM mutex to avoid circular locking dependency, - drop questionable Fixes: tag. Fixes: d93939730347 ("drm/i915: Remove the vma refcount") Closes: https://gitlab.freedesktop.org/drm/intel/issues/8875 Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org # v5.19+ Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240305143747.335367-6-janusz.krzysztofik@linux.intel.com (cherry picked from commit f3c71b2ded5c4367144a810ef25f998fd1d6c381) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-28drm/i915: Do not print 'pxp init failed with 0' when it succeedJosé Roberto de Souza
It is misleading, if the intention was to also print something in case it succeed it should have a different string. Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Fixes: 698e19da2914 ("drm/i915: Skip pxp init if gt is wedged") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240320210547.71937-1-jose.souza@intel.com (cherry picked from commit d437099ab21cd4c6ce5d578b765df642d759c929) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-28drm/i915: Do not match JSL in ehl_combo_pll_div_frac_wa_needed()Jonathon Hall
Since commit 0c65dc062611 ("drm/i915/jsl: s/JSL/JASPERLAKE for platform/subplatform defines"), boot freezes on a Jasper Lake tablet (Librem 11), usually with graphical corruption on the eDP display, but sometimes just a black screen. This commit was included in 6.6 and later. That commit was intended to refactor EHL and JSL macros, but the change to ehl_combo_pll_div_frac_wa_needed() started matching JSL incorrectly when it was only intended to match EHL. It replaced: return ((IS_PLATFORM(i915, INTEL_ELKHARTLAKE) && IS_JSL_EHL_DISPLAY_STEP(i915, STEP_B0, STEP_FOREVER)) || with: return (((IS_ELKHARTLAKE(i915) || IS_JASPERLAKE(i915)) && IS_DISPLAY_STEP(i915, STEP_B0, STEP_FOREVER)) || Remove IS_JASPERLAKE() to fix the regression. Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm> Cc: stable@vger.kernel.org Fixes: 0c65dc062611 ("drm/i915/jsl: s/JSL/JASPERLAKE for platform/subplatform defines") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240313135424.3731410-1-jonathon.hall@puri.sm Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 1ef48859317b2a77672dea8682df133abf9c44ed) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-28drm/i915/hwmon: Fix locking inversion in sysfs getterJanusz Krzysztofik
In i915 hwmon sysfs getter path we now take a hwmon_lock, then acquire an rpm wakeref. That results in lock inversion: <4> [197.079335] ====================================================== <4> [197.085473] WARNING: possible circular locking dependency detected <4> [197.091611] 6.8.0-rc7-Patchwork_129026v7-gc4dc92fb1152+ #1 Not tainted <4> [197.098096] ------------------------------------------------------ <4> [197.104231] prometheus-node/839 is trying to acquire lock: <4> [197.109680] ffffffff82764d80 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc+0x9a/0x350 <4> [197.116939] but task is already holding lock: <4> [197.122730] ffff88811b772a40 (&hwmon->hwmon_lock){+.+.}-{3:3}, at: hwm_energy+0x4b/0x100 [i915] <4> [197.131543] which lock already depends on the new lock. ... <4> [197.507922] Chain exists of: fs_reclaim --> &gt->reset.mutex --> &hwmon->hwmon_lock <4> [197.518528] Possible unsafe locking scenario: <4> [197.524411] CPU0 CPU1 <4> [197.528916] ---- ---- <4> [197.533418] lock(&hwmon->hwmon_lock); <4> [197.537237] lock(&gt->reset.mutex); <4> [197.543376] lock(&hwmon->hwmon_lock); <4> [197.549682] lock(fs_reclaim); ... <4> [197.632548] Call Trace: <4> [197.634990] <TASK> <4> [197.637088] dump_stack_lvl+0x64/0xb0 <4> [197.640738] check_noncircular+0x15e/0x180 <4> [197.652968] check_prev_add+0xe9/0xce0 <4> [197.656705] __lock_acquire+0x179f/0x2300 <4> [197.660694] lock_acquire+0xd8/0x2d0 <4> [197.673009] fs_reclaim_acquire+0xa1/0xd0 <4> [197.680478] __kmalloc+0x9a/0x350 <4> [197.689063] acpi_ns_internalize_name.part.0+0x4a/0xb0 <4> [197.694170] acpi_ns_get_node_unlocked+0x60/0xf0 <4> [197.720608] acpi_ns_get_node+0x3b/0x60 <4> [197.724428] acpi_get_handle+0x57/0xb0 <4> [197.728164] acpi_has_method+0x20/0x50 <4> [197.731896] acpi_pci_set_power_state+0x43/0x120 <4> [197.736485] pci_power_up+0x24/0x1c0 <4> [197.740047] pci_pm_default_resume_early+0x9/0x30 <4> [197.744725] pci_pm_runtime_resume+0x2d/0x90 <4> [197.753911] __rpm_callback+0x3c/0x110 <4> [197.762586] rpm_callback+0x58/0x70 <4> [197.766064] rpm_resume+0x51e/0x730 <4> [197.769542] rpm_resume+0x267/0x730 <4> [197.773020] rpm_resume+0x267/0x730 <4> [197.776498] rpm_resume+0x267/0x730 <4> [197.779974] __pm_runtime_resume+0x49/0x90 <4> [197.784055] __intel_runtime_pm_get+0x19/0xa0 [i915] <4> [197.789070] hwm_energy+0x55/0x100 [i915] <4> [197.793183] hwm_read+0x9a/0x310 [i915] <4> [197.797124] hwmon_attr_show+0x36/0x120 <4> [197.800946] dev_attr_show+0x15/0x60 <4> [197.804509] sysfs_kf_seq_show+0xb5/0x100 Acquire the wakeref before the lock and hold it as long as the lock is also held. Follow that pattern across the whole source file where similar lock inversion can happen. v2: Keep hardware read under the lock so the whole operation of updating energy from hardware is still atomic (Guenter), - instead, acquire the rpm wakeref before the lock and hold it as long as the lock is held, - use the same aproach for other similar places across the i915_hwmon.c source file (Rodrigo). Fixes: 1b44019a93e2 ("drm/i915/guc: Disable PL1 power limit when loading GuC firmware") Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: <stable@vger.kernel.org> # v6.5+ Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240311203500.518675-2-janusz.krzysztofik@linux.intel.com (cherry picked from commit 71b218771426ea84c0e0148a2b7ac52c1f76e792) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-28drm/i915/dsb: Fix DSB vblank waits when using VRRVille Syrjälä
Looks like the undelayed vblank gets signalled exactly when the active period ends. That is a problem for DSB+VRR when we are already in vblank and expect DSB to start executing as soon as we send the push. Instead of starting, the DSB just keeps on waiting for the undelayed vblank which won't signal until the end of the next frame's active period, which is far too late. The end result is that DSB won't have even started executing by the time the flips/etc. have completed. We then wait for an extra 1ms, after which we terminate the DSB and report a timeout: [drm] *ERROR* [CRTC:80:pipe A] DSB 0 timed out waiting for idle (current head=0xfedf4000, head=0x0, tail=0x1080) To fix this let's configure DSB to use the so called VRR "safe window" instead of the undelayed vblank to trigger the DSB vblank logic, when VRR is enabled. Cc: stable@vger.kernel.org Fixes: 34d8311f4a1c ("drm/i915/dsb: Re-instate DSB for LUT updates") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9927 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240306040806.21697-3-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com> (cherry picked from commit 41429d9b68367596eb3d6d5961e6295c284622a7) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-28drm/i915/vrr: Generate VRR "safe window" for DSBVille Syrjälä
Looks like TRANS_CHICKEN bit 31 means something totally different depending on the platform: TGL: generate VRR "safe window" for DSB ADL/DG2: make TRANS_SET_CONTEXT_LATENCY effective with VRR So far we've only set this on ADL/DG2, but when using DSB+VRR we also need to set it on TGL. And a quick test on MTL says it doesn't need this bit for either of those purposes, even though it's still documented as valid in bspec. Cc: stable@vger.kernel.org Fixes: 34d8311f4a1c ("drm/i915/dsb: Re-instate DSB for LUT updates") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9927 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240306040806.21697-2-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com> (cherry picked from commit 810e4519a1b34b5a0ff0eab32e5b184f533c5ee9) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-28drm/i915/display/debugfs: Fix duplicate checks in i915_drrs_statusBhanuprakash Modem
Remove duplicate checks for debugfs entry "DRRS capable:". Fixes: 20af10845864 ("drm/i915/display/debugfs: New entry "DRRS capable" to i915_drrs_status") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240227123833.2799647-2-bhanuprakash.modem@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 3d81fceb60f20fe2ceed2198636ee6dc9ef46775) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-28drm/i915/drrs: Refactor CPU transcoder DRRS checkBhanuprakash Modem
Rename cpu_transcoder_has_drrs() to intel_cpu_transcoder_has_drrs() and move it to intel_drrs.[ch]. V2: - Move helpers to intel_drrs.[ch] (Jani) - Fix commit message (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240228055502.2857819-1-bhanuprakash.modem@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 2d04f8158548103c082190c8dbf6a19097e2423e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-28drm/i915/mtl: Update workaround 14018575942Tejas Upadhyay
Applying WA 14018575942 only on Compute engine has impact on some apps like chrome. Updating this WA to apply on Render engine as well as it is helping with performance on Chrome. Note: There is no concern from media team thus not applying WA on media engines. We will revisit if any issues reported from media team. V2(Matt): - Use correct WA number Fixes: 668f37e1ee11 ("drm/i915/mtl: Update workaround 14018778641") Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240228103738.2018458-1-tejas.upadhyay@intel.com (cherry picked from commit 71271280175aa0ed6673e40cce7c01296bcd05f6) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-28drm/i915/dsi: Go back to the previous INIT_OTP/DISPLAY_ON order, mostlyVille Syrjälä
Reinstate commit 88b065943cb5 ("drm/i915/dsi: Do display on sequence later on icl+"), for the most part. Turns out some machines (eg. Chuwi Minibook X) really do need that updated order. It is also the order the Windows driver uses. However we can't just undo the revert since that would again break Lenovo 82TQ. After staring at the VBT sequences for both machines I've concluded that the Lenovo 82TQ sequences look somewhat broken: - INIT_OTP is not present at all - what should be in INIT_OTP is found in DISPLAY_ON - what should be in DISPLAY_ON is found in BACKLIGHT_ON (along with the actual backlight stuff) The Chuwi Minibook X on the other hand has a full complement of sequences in its VBT. So let's try to deal with the broken sequences in the Lenovo 82TQ VBT by simply swapping the (non-existent) INIT_OTP sequence with the DISPLAY_ON sequence. Thus we execute DISPLAY_ON when intending to execute INIT_OTP, and execute nothing at all when intending to execute DISPLAY_ON. That should be 100% equivalent to the revert, for such broken VBTs. Cc: stable@vger.kernel.org Fixes: 6992eb815d08 ("Revert "drm/i915/dsi: Do display on sequence later on icl+"") References: https://gitlab.freedesktop.org/drm/intel/-/issues/10071 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10334 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240305083659.8396-1-ville.syrjala@linux.intel.com Acked-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 94ae4612ea336bfc3c12b3fc68467c6711a4f39b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-28drm/i915/display: Disable AuxCCS framebuffers if built for XeJuha-Pekka Heikkila
AuxCCS framebuffers don't work on Xe driver hence disable them from plane capabilities until they are fixed. FlatCCS framebuffers work and they are left enabled. CCS is left untouched for i915 driver. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/933 Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Tested-by: José Roberto de Souza <jose.souza@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Fixes: 44e694958b95 ("drm/xe/display: Implement display support") Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240228140225.858145-1-juhapekka.heikkila@gmail.com (cherry picked from commit b7232a730fbf043f54fb46fbf4a6e92936770e79) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-28drm/i915: Stop doing double audio enable/disable on SDVO and g4x+ DPVille Syrjälä
Looks like I misplaced a few hunks when I moved the audio enable/disable out from the encoder enable/disable hooks. So we are now doing a double audio enable/disable on SDVO and g4x+ DP. Probably harmless as doing it twice shouldn't really change anything, but let's do it just once, as intended. Fixes: cff742cc6851 ("drm/i915: Hoist the encoder->audio_{enable,disable}() calls higher up") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240226193251.29619-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 315bd0a0825776d6c66d474bf572db64fa019ad8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-03-28x86/efistub: Reinstate soft limit for initrd loadingArd Biesheuvel
Commit 8117961d98fb2 ("x86/efi: Disregard setup header of loaded image") dropped the memcopy of the image's setup header into the boot_params struct provided to the core kernel, on the basis that EFI boot does not need it and should rely only on a single protocol to interface with the boot chain. It is also a prerequisite for being able to increase the section alignment to 4k, which is needed to enable memory protections when running in the boot services. So only the setup_header fields that matter to the core kernel are populated explicitly, and everything else is ignored. One thing was overlooked, though: the initrd_addr_max field in the setup_header is not used by the core kernel, but it is used by the EFI stub itself when it loads the initrd, where its default value of INT_MAX is used as the soft limit for memory allocation. This means that, in the old situation, the initrd was virtually always loaded in the lower 2G of memory, but now, due to initrd_addr_max being 0x0, the initrd may end up anywhere in memory. This should not be an issue principle, as most systems can deal with this fine. However, it does appear to tickle some problems in older UEFI implementations, where the memory ends up being corrupted, resulting in errors when unpacking the initramfs. So set the initrd_addr_max field to INT_MAX like it was before. Fixes: 8117961d98fb2 ("x86/efi: Disregard setup header of loaded image") Reported-by: Radek Podgorny <radek@podgorny.cz> Closes: https://lore.kernel.org/all/a99a831a-8ad5-4cb0-bff9-be637311f771@podgorny.cz Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2024-03-28efi/libstub: Cast away type warning in use of max()Ard Biesheuvel
Avoid a type mismatch warning in max() by switching to max_t() and providing the type explicitly. Fixes: 3cb4a4827596abc82e ("efi/libstub: fix efi_random_alloc() ...") Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 22:49:28 +0000