summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-21selftests/bpf: fix test_btf_dump with O=Ilya Leoshkevich
test_btf_dump fails when run with O=, because it needs to access source files and assumes they live in ./progs/, which is not the case in this scenario. Fix by instructing kselftest to copy btf_dump_test_case_*.c files to the test directory. Since kselftest does not preserve directory structure, adjust the test to look in ./progs/ and then in ./. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21selftests/bpf: fix test_cgroup_storage on s390Ilya Leoshkevich
test_cgroup_storage fails on s390 with an assertion failure: packets are dropped when they shouldn't. The problem is that BPF_DW packet count is accessed as BPF_W with an offset of 0, which is not correct on big-endian machines. Since the point of this test is not to verify narrow loads/stores, simply use BPF_DW when working with packet counts. Fixes: 68cfa3ac6b8d ("selftests/bpf: add a cgroup storage test") Fixes: 919646d2a3a9 ("selftests/bpf: extend the storage test to test per-cpu cgroup storage") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-21net/mlx5: Create bypass and loopback flow steering namespaces for RDMA RXMark Zhang
Use different namespaces for bypass and switchdev loopback because they have different priorities and default table miss action requirement: 1. bypass: with multiple priorities support, and MLX5_FLOW_TABLE_MISS_ACTION_DEF as the default table miss action; 2. switchdev loopback: with single priority support, and MLX5_FLOW_TABLE_MISS_ACTION_SWITCH_DOMAIN as the default table miss action. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-08-21net/mlx5: Add per-namespace flow table default miss action supportMark Zhang
Currently all the namespaces under the same steering domain share the same default table miss action, however in some situations (e.g., RDMA RX) different actions are required. This patch adds a per-namespace default table miss action instead of using the miss action of the steering domain. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-08-21Revert "mmc: sdhci-tegra: drop ->get_ro() implementation"Dmitry Osipenko
The WRITE_PROTECT bit is always in a "protected mode" on Tegra and WP-GPIO state need to be used instead. In a case of the GPIO absence, write-enable should be assumed. External SD is writable once again as a result of this patch because the offending commit changed behaviour for the case of a missing WP-GPIO to fall back to WRITE_PROTECT bit-checking, which is incorrect for Tegra. Cc: stable@vger.kernel.org # v5.1+ Fixes: e8391453e27f ("mmc: sdhci-tegra: drop ->get_ro() implementation") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-08-21drm/i915: Fix HW readout for crtc_clock in HDMI modeImre Deak
The conversion during HDMI HW readout from port_clock to crtc_clock was missed when HDMI 10bpc support was added, so fix that. v2: - Unscrew the non-HDMI case. Fixes: cd9e11a8bf25 ("drm/i915/icl: Add 10-bit support for hdmi") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109593 Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190808162547.7009-1-imre.deak@intel.com (cherry picked from commit 2969a78aead38b49e80c821a5c683544ab16160d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-08-21mac80211: minstrel_ht: improve rate probing for devices with static fallbackFelix Fietkau
On some devices that only support static rate fallback tables sending rate control probing packets can be really expensive. Probing lower rates can already hurt throughput quite a bit. What hurts even more is the fact that on mt76x0/mt76x2, single probing packets can only be forced by directing packets at a different internal hardware queue, which causes some heavy reordering and extra latency. The reordering issue is mainly problematic while pushing lots of packets to a particular station. If there is little activity, the overhead of probing is neglegible. The static fallback behavior is designed to pretty much only handle rate control algorithms that use only a very limited set of rates on which the algorithm switches up/down based on packet error rate. In order to better support that kind of hardware, this patch implements a different approach to rate probing where it switches to a slightly higher rate, waits for tx status feedback, then updates the stats and switches back to the new max throughput rate. This only triggers above a packet rate of 100 per stats interval (~50ms). For that kind of probing, the code has to reduce the set of probing rates a lot more compared to single packet probing, so it uses only one packet per MCS group which is either slightly faster, or as close as possible to the max throughput rate. This allows switching between similar rates with different numbers of streams. The algorithm assumes that the hardware will work its way lower within an MCS group in case of retransmissions, so that lower rates don't have to be probed by the high packets per second rate probing code. To further reduce the search space, it also does not probe rates with lower channel bandwidth than the max throughput rate. At the moment, these changes will only affect mt76x0/mt76x2. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: minstrel_ht: fix default max throughput rate indexesFelix Fietkau
Use the first supported rate instead of 0 (which can be invalid) Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190820095449.45255-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: minstrel_ht: reduce unnecessary rate probing attemptsFelix Fietkau
On hardware with static fallback tables (e.g. mt76x2), rate probing attempts can be very expensive. On such devices, avoid sampling rates slower than the per-group max throughput rate, based on the assumption that the fallback table will take care of probing lower rates within that group if the higher rates fail. To further reduce unnecessary probing attempts, skip duplicate attempts on rates slower than the max throughput rate. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190820095449.45255-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: minstrel_ht: fix per-group max throughput rate initializationFelix Fietkau
The group number needs to be multiplied by the number of rates per group to get the full rate index Fixes: 5935839ad735 ("mac80211: improve minstrel_ht rate sorting by throughput & probability") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190820095449.45255-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21nl80211: Add support for EDMG channelsAlexei Avshalom Lazar
802.11ay specification defines Enhanced Directional Multi-Gigabit (EDMG) STA and AP which allow channel bonding of 2 channels and more. Introduce new NL attributes that are needed for enabling and configuring EDMG support. Two new attributes are used by kernel to publish driver's EDMG capabilities to the userspace: NL80211_BAND_ATTR_EDMG_CHANNELS - bitmap field that indicates the 2.16 GHz channel(s) that are supported by the driver. When this attribute is not set it means driver does not support EDMG. NL80211_BAND_ATTR_EDMG_BW_CONFIG - represent the channel bandwidth configurations supported by the driver. Additional two new attributes are used by the userspace for connect command and for AP configuration: NL80211_ATTR_WIPHY_EDMG_CHANNELS NL80211_ATTR_WIPHY_EDMG_BW_CONFIG New rate info flag - RATE_INFO_FLAGS_EDMG, can be reported from driver and used for bitrate calculation that will take into account EDMG according to the 802.11ay specification. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Link: https://lore.kernel.org/r/1566138918-3823-2-git-send-email-ailizaro@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: fix possible NULL pointerderef in obss pd codeJohn Crispin
he_spr_ie_elem is dereferenced before the NULL check. fix this by moving the assignment after the check. fixes commit 697f6c507c74 ("mac80211: propagate HE operation info into bss_conf") This was reported by the static code checker. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190813070712.25509-1-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: add assoc-at supportBen Greear
Report timestamp for when sta becomes associated. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20190809180001.26393-2-greearb@candelatech.com [fix ktime_get_boot_ns() to ktime_get_boottime_ns(), assoc_at type to u64] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: Support assoc-at timer in sta-infoBen Greear
Report timestamp of when sta became associated. This is the boottime clock, units are nano-seconds. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20190809180001.26393-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: apply same mandatory rate flags for 5GHz and 6GHzArend van Spriel
For the new 6GHz band the same rules apply for mandatory rates so add it to set_mandatory_flags_band() function. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-9-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: ibss: use 11a mandatory rates for 6GHz band operationArend van Spriel
The default mandatory rates, ie. when not specified by user-space, is determined by the band. Select 11a rateset for 6GHz band. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-8-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: use same IR permissive rules for 6GHz bandArend van Spriel
The function cfg80211_ir_permissive_chan() is applicable for 6GHz band as well so make sure it is handled. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-7-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: add 6GHz in code handling array with NUM_NL80211_BANDS entriesArend van Spriel
In nl80211.c there is a policy for all bands in NUM_NL80211_BANDS and in trace.h there is a callback trace for multicast rates which is per band in NUM_NL80211_BANDS. Both need to be extended for the new NL80211_BAND_6GHZ. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-6-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: extend ieee80211_operating_class_to_band() for 6GHzArend van Spriel
Add 6GHz operating class range as defined in 802.11ax D4.1 Annex E. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-5-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: util: add 6GHz channel to freq conversion and vice versaArend van Spriel
Extend the functions ieee80211_channel_to_frequency() and ieee80211_frequency_to_channel() to support 6GHz band according specification in 802.11ax D4.1 27.3.22.2. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-4-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: add 6GHz UNII band definitionsArend van Spriel
For the new 6GHz there are new UNII band definitions as listed in the FCC notice [1]. [1] https://docs.fcc.gov/public/attachments/FCC-18-147A1_Rcd.pdf Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-3-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21nl80211: add 6GHz band definition to enum nl80211_bandArend van Spriel
In the 802.11ax specification a new band is introduced, which is also proposed by FCC for unlicensed use. This band is referred to as 6GHz spanning frequency range from 5925 to 7125 MHz. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-2-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21modules: page-align module section allocations only for arches supporting ↵He Zhe
strict module rwx We should keep the case of "#define debug_align(X) (X)" for all arches without CONFIG_HAS_STRICT_MODULE_RWX ability, which would save people, who are sensitive to system size, a lot of memory when using modules, especially for embedded systems. This is also the intention of the original #ifdef... statement and still valid for now. Note that this still keeps the effect of the fix of the following commit, 38f054d549a8 ("modules: always page-align module section allocations"), since when CONFIG_ARCH_HAS_STRICT_MODULE_RWX is enabled, module pages are aligned. Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-08-21Revert "cfg80211: fix processing world regdomain when non modular"Hodaszi, Robert
This reverts commit 96cce12ff6e0 ("cfg80211: fix processing world regdomain when non modular"). Re-triggering a reg_process_hint with the last request on all events, can make the regulatory domain fail in case of multiple WiFi modules. On slower boards (espacially with mdev), enumeration of the WiFi modules can end up in an intersected regulatory domain, and user cannot set it with 'iw reg set' anymore. This is happening, because: - 1st module enumerates, queues up a regulatory request - request gets processed by __reg_process_hint_driver(): - checks if previous was set by CORE -> yes - checks if regulator domain changed -> yes, from '00' to e.g. 'US' -> sends request to the 'crda' - 2nd module enumerates, queues up a regulator request (which triggers the reg_todo() work) - reg_todo() -> reg_process_pending_hints() sees, that the last request is not processed yet, so it tries to process it again. __reg_process_hint driver() will run again, and: - checks if the last request's initiator was the core -> no, it was the driver (1st WiFi module) - checks, if the previous initiator was the driver -> yes - checks if the regulator domain changed -> yes, it was '00' (set by core, and crda call did not return yet), and should be changed to 'US' ------> __reg_process_hint_driver calls an intersect Besides, the reg_process_hint call with the last request is meaningless since the crda call has a timeout work. If that timeout expires, the first module's request will lost. Cc: stable@vger.kernel.org Fixes: 96cce12ff6e0 ("cfg80211: fix processing world regdomain when non modular") Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com> Link: https://lore.kernel.org/r/20190614131600.GA13897@a1-hr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: add missing length field increment when generating Radiotap headerJohn Crispin
The code generating the Tx Radiotap header when using tx_status_ext was missing a field increment after setting the VHT bandwidth. Fixes: 3d07ffcaf320 ("mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190807075949.32414-4-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: 80Mhz was not reported properly when using tx_status_extJohn Crispin
When reporting 80MHz, we need to set 4 and not 2 inside the corresponding field inside the Tx Radiotap header. Fixes: 3d07ffcaf320 ("mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190807075949.32414-3-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: fix bad guard when reporting legacy ratesJohn Crispin
When reporting legacy rates inside the TX Radiotap header we need to split the check between "uses tx_statua_ext" and "is legacy rate". Not doing so would make the code drop into the !tx_status_ext path. Fixes: 3d07ffcaf320 ("mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190807075949.32414-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: fix TX legacy rate reporting when tx_status_ext is usedJohn Crispin
The RX Radiotap header length was not calculated properly when reporting legacy rates using tx_status_ext. Fixes: 3d07ffcaf320 ("mac80211: add struct ieee80211_tx_status support to ieee80211_add_tx_radiotap_header") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190807075949.32414-1-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"Paolo Bonzini
This reverts commit 4e103134b862314dc2f2f18f2fb0ab972adc3f5f. Alex Williamson reported regressions with device assignment with this patch. Even though the bug is probably elsewhere and still latent, this is needed to fix the regression. Fixes: 4e103134b862 ("KVM: x86/mmu: Zap only the relevant pages when removing a memslot", 2019-02-05) Reported-by: Alex Willamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org Cc: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-21selftests: kvm: fix state save/load on processors without XSAVEPaolo Bonzini
state_test and smm_test are failing on older processors that do not have xcr0. This is because on those processor KVM does provide support for KVM_GET/SET_XSAVE (to avoid having to rely on the older KVM_GET/SET_FPU) but not for KVM_GET/SET_XCRS. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-21cfg80211: Fix Extended Key ID key install checksAlexander Wetzel
Fix two shortcomings in the Extended Key ID API: 1) Allow the userspace to install pairwise keys using keyid 1 without NL80211_KEY_NO_TX set. This allows the userspace to install and activate pairwise keys with keyid 1 in the same way as for keyid 0, simplifying the API usage for e.g. FILS and FT key installs. 2) IEEE 802.11 - 2016 restricts Extended Key ID usage to CCMP/GCMP ciphers in IEEE 802.11 - 2016 "9.4.2.25.4 RSN capabilities". Enforce that when installing a key. Cc: stable@vger.kernel.org # 5.2 Fixes: 6cdd3979a2bd ("nl80211/cfg80211: Extended Key ID support") Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20190805123400.51567-1-alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21mac80211: fix possible sta leakJohannes Berg
If TDLS station addition is rejected, the sta memory is leaked. Avoid this by moving the check before the allocation. Cc: stable@vger.kernel.org Fixes: 7ed5285396c2 ("mac80211: don't initiate TDLS connection if station is not associated to AP") Link: https://lore.kernel.org/r/20190801073033.7892-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21ALSA: usb-audio: Fix invalid NULL check in snd_emuusb_set_samplerate()Takashi Iwai
The quirk function snd_emuusb_set_samplerate() has a NULL check for the mixer element, but this is useless in the current code. It used to be a check against mixer->id_elems[unitid] but it was changed later to the value after mixer_eleme_list_to_info() which is always non-NULL due to the container_of() usage. This patch fixes the check before the conversion. While we're at it, correct a typo in the comment in the function, too. Fixes: 8c558076c740 ("ALSA: usb-audio: Clean up mixer element list traverse") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-20Merge tag 'mlx5-updates-2019-08-15' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2019-08-15 This patchset introduces changes in mlx5 devlink health reporters. The highlight of these changes is adding a new reporter: RX reporter mlx5 RX reporter: reports and recovers from timeouts and RX completion error. 1) Perform TX reporter cleanup. In order to maintain the code flow as similar as possible between RX and TX reporters, start the set with cleanup. 2) Prepare for code sharing, generalize and move shared functionality. 3) Refactor and extend TX reporter diagnostics information to align the TX reporter diagnostics output with the RX reporter's diagnostics output. 4) Add helper functions Patch 11: Add RX reporter, initially supports only the diagnostics call back. 5) Change ICOSQ (Internal Operations Send Queue) open/close flow to avoid race between interface down and completion error recovery. 6) Introduce recovery flows for RX ring population timeout on ICOSQ, and for completion errors on ICOSQ and on RQ (Regular receive queues). 7) Include RX reporters in mlx5 documentation. 8) Last two patches of this series, are trivial fixes for previously submitted patches on this release cycle. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20video: fbdev: acornfb: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: rpc_defconfig arm): drivers/video/fbdev/acornfb.c: In function ‘acornfb_parse_dram’: drivers/video/fbdev/acornfb.c:860:9: warning: this statement may fall through [-Wimplicit-fallthrough=] size *= 1024; ~~~~~^~~~~~~ drivers/video/fbdev/acornfb.c:861:3: note: here case 'K': ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-20scsi: libsas: sas_discover: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: mtx1_defconfig mips): drivers/scsi/libsas/sas_discover.c: In function ‘sas_discover_domain’: ./include/linux/printk.h:309:2: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/libsas/sas_discover.c:459:3: note: in expansion of macro ‘pr_notice’ pr_notice("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n"); ^~~~~~~~~ drivers/scsi/libsas/sas_discover.c:462:2: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-20MIPS: Octeon: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: cavium_octeon_defconfig mips): arch/mips/include/asm/octeon/cvmx-sli-defs.h:47:6: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-20power: supply: ab8500_charger: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: allmodconfig arm): drivers/power/supply/ab8500_charger.c: In function ‘ab8500_charger_max_usb_curr’: drivers/power/supply/ab8500_charger.c:738:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (di->vbus_detected) { ^ drivers/power/supply/ab8500_charger.c:745:2: note: here case USB_STAT_HM_IDGND: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-20watchdog: wdt285: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: footbridge_defconfig arm): drivers/watchdog/wdt285.c: In function ‘watchdog_ioctl’: drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=] watchdog_ping(); ^~~~~~~~~~~~~~~ drivers/watchdog/wdt285.c:172:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-20mtd: sa1100: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: assabet_defconfig arm): drivers/mtd/maps/sa1100-flash.c: In function ‘sa1100_probe_subdev’: drivers/mtd/maps/sa1100-flash.c:82:3: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_WARNING "SA1100 flash: unknown base address " ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "0x%08lx, assuming CS0\n", phys); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/maps/sa1100-flash.c:85:2: note: here case SA1100_CS0_PHYS: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-20drm/sun4i: tcon: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: sunxi_defconfig arm): drivers/gpu/drm/sun4i/sun4i_tcon.c: In function ‘sun4i_tcon0_mode_set_dithering’: drivers/gpu/drm/sun4i/sun4i_tcon.c:318:7: warning: this statement may fall through [-Wimplicit-fallthrough=] val |= SUN4I_TCON0_FRM_CTL_MODE_B; drivers/gpu/drm/sun4i/sun4i_tcon.c:319:2: note: here case MEDIA_BUS_FMT_RGB666_1X18: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-20drm/sun4i: sun6i_mipi_dsi: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: multi_v7_defconfig arm): drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c: In function ‘sun6i_dsi_transfer’: drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:993:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (msg->rx_len == 1) { ^ drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:998:2: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-20ARM: riscpc: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: rpc_defconfig arm): arch/arm/mach-rpc/riscpc.c: In function ‘parse_tag_acorn’: arch/arm/mach-rpc/riscpc.c:48:13: warning: this statement may fall through [-Wimplicit-fallthrough=] vram_size += PAGE_SIZE * 256; ~~~~~~~~~~^~~~~~~~~~~~~~~~~~ arch/arm/mach-rpc/riscpc.c:49:2: note: here case 256: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-20dmaengine: fsldma: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: powerpc-ppa8548_defconfig powerpc): drivers/dma/fsldma.c: In function ‘fsl_dma_chan_probe’: drivers/dma/fsldma.c:1165:26: warning: this statement may fall through [-Wimplicit-fallthrough=] chan->toggle_ext_pause = fsl_chan_toggle_ext_pause; ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/dma/fsldma.c:1166:2: note: here case FSL_DMA_IP_83XX: ^~~~ Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-20Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-08-20 This series contains updates to ice driver only. Brett fixes the detection of a hung transmit ring by checking the software based tail (next_to_use) to determine if there is pending work. Updates the driver to assume that using more than one receive queue per receive ring container is a rare case, so use unlikely() in the case were we actually need to divide our budget for multiple queues. Fixed an issue where the write back on ITR bit was not being set when interrupts are disabled, which was causing only write backs when polling only when a cache line is filled. Cleans up unnecessary wait times during VF bring up and reset paths. Increased the mailbox size for receive queues that are used to communicate with VFs to accommodate the large number of VFs that the driver can support. Akeem restructures the initialization flows for VFs, including how VFs are configured and resources allocated to improve flows so that when we clean up resources, we do not try to free resources that were never allocated. Organizes code to ensure that VF specific code is located in the SR-IOV specific file. Paul fixes an issue when setting the pause parameter which was incorrectly blocking users from changing receive or transmit pause settings. Ensure register access for MSIX vector index is only done in the PF space and not absolute device space. Usha fixes a potential kernel hang in the DCB rebuild path when in CEE mode, where the ETS recommended DCB configuration is not being set or set correctly. Mitch updates the driver to process all receive descriptors, regardless of the size of the associated data. Tony fixes and issue during the reset/rebuild path of a PF VSI where we were assuming that the PF VSI was always to be enabled, which can attempt to bring up a PF VSI on a downed interface which can lead to various crashes. Pawel fixes up variable definitions to match the type of data being stored. v2: Dropped patch 1 of the series to add ethtool support to query/add channels on a VSI, while we re-qork the functionality to match the ethtool expected behavior to report combined (Tx and Rx) numbers. v3: Updated patch 4 to use kzalloc() and kfree() instead devm_kzalloc() and devm_kfree(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-21dma-direct: fix zone selection after an unaddressable CMA allocationChristoph Hellwig
The new dma_alloc_contiguous hides if we allocate CMA or regular pages, and thus fails to retry a ZONE_NORMAL allocation if the CMA allocation succeeds but isn't addressable. That means we either fail outright or dip into a small zone that might not succeed either. Thanks to Hillf Danton for debugging this issue. Fixes: b1d2dc009dec ("dma-contiguous: add dma_{alloc,free}_contiguous() helpers") Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
2019-08-20ice: improve print for VF's when adding/deleting MAC filtersBrett Creeley
When we fail to add/delete MAC filters in the VF, the print doesn't distinguish between the two. Fix that by printing whether or not we failed to add/delete the MAC filter respectively. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-08-20ice: Change type for queue countsPawel Kaminski
These queue variables are being assigned values that are type u16. Change the local variables to match these types. Since these represent queue counts, they should never be negative. Signed-off-by: Pawel Kaminski <pawel.kaminski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-08-20ice: Move VF resources definition to SR-IOV specific fileAkeem G Abodunrin
In order to use some of the VF resources definition in the SR-IOV specific virtchnl header file, this patch moves applicable code to ice_virtchnl_pf.h file accordingly... and they should have been defined in the destination file originally. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-08-20ice: Increase size of Mailbox receive queue for many VFsBrett Creeley
Currently we use the ICE_MBXQ_LEN for both the Mailbox send and receive queues that are used to communicate with VFs. This is fine for the send queue because the PF driver will lock the queue for every single send, but for the Mailbox receive queue every VF is posting to its Mailbox send queue and the hardware is then handing the message to the PF on its Mailbox receive queue. This becomes a problem with many VFs because it seems to overburden the Mailbox receive queue on the PF. Fix this by increasing the Mailbox receive queue for the PF to 512 entries. The number 512 was determined based on the number of VFs supported by the device. We can have a total of 256 VFs so in the worst case this allows the VFs to put 2 messages in the PFs Mailbox receive queue at the same time. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit (git 2.34.1) at 2025-09-14 15:24:39 +0000