| Age | Commit message (Collapse) | Author |
|---|
|
This adds support to obtain a device's unique id through dm, similar to the
existing ioctl and persistent resevation handling. We limit this to
single-target devices.
This enables knfsd to export pNFS SCSI luns that have been exported from
multipath devices.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Remove __always_unused parameters from static functions.
Also fix minor formatting issues.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407141607.M3E2XQ0Z-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202409101018.B75pIBKR-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202410011107.U2xbVLRA-lkp@intel.com/
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Signed-off-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Signed-off-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Remove the redundant "i" at the beginning of the error message. This "i"
came from commit 1c1318866928 ("dm: prefer
'"%s...", __func__'"), the "i" is accidentally left.
Signed-off-by: Ssuhung Yeh <ssuhung@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 1c1318866928 ("dm: prefer '"%s...", __func__'")
Cc: stable@vger.kernel.org # v6.3+
|
|
It is possible to spam the kernel log with a misbehaving user process that
is passing incorrect dm ioctls to /dev/mapper/control. Use a rate limit
on these error messages to reduce the noise.
These errors were hit when running the stress-ng's device test.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
uds_compute_index_size() has been unused since it was added in
commit b46d79bdb82a ("dm vdo: add deduplication index storage interface")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
get_data_vio_pool_active_discards()
get_data_vio_pool_discard_limit()
get_data_vio_pool_maximum_discards()
set_data_vio_pool_discard_limit()
are all unused since commit
a9da0fb6d8c6 ("dm vdo: remove all sysfs interfaces")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
dmz_resume_metadata() is unused since it was added in commit
3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
dmz_zone_nr_blocks_shift is unused since it was added in commit
368205601375 ("dm zoned: move fields from struct dmz_dev to dmz_metadata")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
dm_table_bio_based() is unused since commit
29dec90a0f1d ("dm: fix bio_set allocation")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
dm_set_md_type() has been unused since commit
ba30585936b0 ("dm: move setting md->type into dm_setup_md_queue")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
dm_cache_size() and dm_cache_dump() are unused since commit
b29d4986d0da ("dm cache: significant rework to leverage dm-bio-prison-v2")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
dm_cache_size() has been unused since the original commit
c6b4fcbad044 ("dm: add cache target")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
dm_cache_dump() has been unused since the original commit
c6b4fcbad044 ("dm: add cache target")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
btracker_nr_writebacks_queued() has been unused since commit
2e63309507c8 ("dm cache policy smq: don't do any writebacks unless IDLE")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Add a check to the ovl_dentry_weird() function to prevent the
processing of directory inodes that lack the lookup function.
This is important because such inodes can cause errors in overlayfs
when passed to the lowerstack.
Reported-by: syzbot+a8c9d476508bd14a90e5@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=a8c9d476508bd14a90e5
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/linux-unionfs/CAJfpegvx-oS9XGuwpJx=Xe28_jzWx5eRo1y900_ZzWY+=gGzUg@mail.gmail.com/
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Currently the mount_setattr_test fails on machines with a 64K PAGE_SIZE,
with errors such as:
# RUN mount_setattr_idmapped.invalid_fd_negative ...
mkfs.ext4: No space left on device while writing out and closing file system
# mount_setattr_test.c:1055:invalid_fd_negative:Expected system("mkfs.ext4 -q /mnt/C/ext4.img") (256) == 0 (0)
# invalid_fd_negative: Test terminated by assertion
# FAIL mount_setattr_idmapped.invalid_fd_negative
not ok 12 mount_setattr_idmapped.invalid_fd_negative
The code creates a 100,000 byte tmpfs:
ASSERT_EQ(mount("testing", "/mnt", "tmpfs", MS_NOATIME | MS_NODEV,
"size=100000,mode=700"), 0);
And then a little later creates a 2MB ext4 filesystem in that tmpfs:
ASSERT_EQ(ftruncate(img_fd, 1024 * 2048), 0);
ASSERT_EQ(system("mkfs.ext4 -q /mnt/C/ext4.img"), 0);
At first glance it seems like that should never work, after all 2MB is
larger than 100,000 bytes. However the filesystem image doesn't actually
occupy 2MB on "disk" (actually RAM, due to tmpfs). On 4K kernels the
ext4.img uses ~84KB of actual space (according to du), which just fits.
However on 64K PAGE_SIZE kernels the ext4.img takes at least 256KB,
which is too large to fit in the tmpfs, hence the errors.
It seems fraught to rely on the ext4.img taking less space on disk than
the allocated size, so instead create the tmpfs with a size of 2MB. With
that all 21 tests pass on 64K PAGE_SIZE kernels.
Fixes: 01eadc8dd96d ("tests: add mount_setattr() selftests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20241115134114.1219555-1-mpe@ellerman.id.au
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We can reduce boilerplate code by using
devm_regulator_get_enable_read_voltage().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20241119-input-mpr121-regulator-get-enable-read-voltage-v3-1-1d8ee5c22f6c@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The header clearly states that it does not want to be included directly,
only via 'device.h'. 'platform_device.h' works equally well. Remove the
direct inclusion.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241118072917.3853-7-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The header clearly states that it does not want to be included directly,
only via 'device.h'. 'platform_device.h' works equally well. Remove the
direct inclusion.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241118072917.3853-6-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
get_disk_ro and bdev_read_only return boolean conditions,
don't masquerade them as int.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241119160932.1327864-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bdev_read_only is already defined as an inline function in blkdev.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241119160932.1327864-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_rq_aligned returns a boolean condition, don't mascquerade it as int.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241119160932.1327864-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The underlying limits are defined as unsigned int, so return that from
blk_lim_dma_alignment_and_pad as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241119160932.1327864-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The underlying limit is defined as an unsigned int, so return that from
queue_dma_alignment as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241119160932.1327864-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The underlying limit is defined as an unsigned int, so return that from
bdev_io_opt as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241119160932.1327864-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As smatch, which is a lot smarter than me noticed. So remove the checks
for it, and condense these checks a bit including the comments stating
the obvious.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241119161157.1328171-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Because it already is encoded in the opcode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241119161157.1328171-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix an issue detected by the `smatch` tool:
block/blk-mq.c:3314 blk_rq_prep_clone() error: uninitialized
symbol 'bio'.
This patch refactors `blk_rq_prep_clone()` to improve code
readability and ensure safety by addressing potential misuse of
the `bio` variable:
- Move the bio_put(bio); call to the bio_ctr error handling block,
which is the only place where it can be triggered.
- Move the bio variable into the __rq_for_each_bio loop scope.
This change removes the need to set bio to NULL at the loop's
end.
discussion on why bio remains uninitialized:
https://lore.kernel.org/lkml/20241004141037.43277-1-surajsonawane0215@gmail.com
Summary of above discussion:
- I pointed out that `bio` can remain uninitialized if the
allocation with `bio_alloc_clone` fails.
- Keith Busch explained that `bio` is initialized to `NULL` when
`bio_alloc_clone()` fails, preventing uninitialized usage.
- John Garry questioned whether `rq_src->bio` being `NULL` could
leave `bio` uninitialized. Keith clarified that in such cases,
`bio` is not referenced, so it does not need initialization.
- Christoph Hellwig recommended code improvements:
- move the bio_put to the bio_ctr error handling, which is the only
case where it can happen
- move the bio variable into the __rq_for_each_bio scope, which
also removed the need to zero it at the end of the loop
These changes enhance code clarity, address static analysis tool
warnings, and make the function more maintainable.
thread of previous version patch discussion:
https://lore.kernel.org/lkml/20241004100842.9052-1-surajsonawane0215@gmail.com
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241119164412.37609-1-surajsonawane0215@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit bc3b1e9e7c50e1de0f573eea3871db61dd4787de.
The bic is associated with sync_bfqq, and bfq_release_process_ref cannot
be put into bfq_put_cooperator.
kasan report:
[ 400.347277] ==================================================================
[ 400.347287] BUG: KASAN: slab-use-after-free in bic_set_bfqq+0x200/0x230
[ 400.347420] Read of size 8 at addr ffff88881cab7d60 by task dockerd/5800
[ 400.347430]
[ 400.347436] CPU: 24 UID: 0 PID: 5800 Comm: dockerd Kdump: loaded Tainted: G E 6.12.0 #32
[ 400.347450] Tainted: [E]=UNSIGNED_MODULE
[ 400.347454] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022
[ 400.347460] Call Trace:
[ 400.347464] <TASK>
[ 400.347468] dump_stack_lvl+0x5d/0x80
[ 400.347490] print_report+0x174/0x505
[ 400.347521] kasan_report+0xe0/0x160
[ 400.347541] bic_set_bfqq+0x200/0x230
[ 400.347549] bfq_bic_update_cgroup+0x419/0x740
[ 400.347560] bfq_bio_merge+0x133/0x320
[ 400.347584] blk_mq_submit_bio+0x1761/0x1e20
[ 400.347625] __submit_bio+0x28b/0x7b0
[ 400.347664] submit_bio_noacct_nocheck+0x6b2/0xd30
[ 400.347690] iomap_readahead+0x50c/0x680
[ 400.347731] read_pages+0x17f/0x9c0
[ 400.347785] page_cache_ra_unbounded+0x366/0x4a0
[ 400.347795] filemap_fault+0x83d/0x2340
[ 400.347819] __xfs_filemap_fault+0x11a/0x7d0 [xfs]
[ 400.349256] __do_fault+0xf1/0x610
[ 400.349270] do_fault+0x977/0x11a0
[ 400.349281] __handle_mm_fault+0x5d1/0x850
[ 400.349314] handle_mm_fault+0x1f8/0x560
[ 400.349324] do_user_addr_fault+0x324/0x970
[ 400.349337] exc_page_fault+0x76/0xf0
[ 400.349350] asm_exc_page_fault+0x26/0x30
[ 400.349360] RIP: 0033:0x55a480d77375
[ 400.349384] Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 49 3b 66 10 0f 86 ae 02 00 00 55 48 89 e5 48 83 ec 58 48 8b 10 <83> 7a 10 00 0f 84 27 02 00 00 44 0f b6 42 28 44 0f b6 4a 29 41 80
[ 400.349392] RSP: 002b:00007f18c37fd8b8 EFLAGS: 00010216
[ 400.349401] RAX: 00007f18c37fd9d0 RBX: 0000000000000000 RCX: 0000000000000000
[ 400.349407] RDX: 000055a484407d38 RSI: 000000c000e8b0c0 RDI: 0000000000000000
[ 400.349412] RBP: 00007f18c37fd910 R08: 000055a484017f60 R09: 000055a484066f80
[ 400.349417] R10: 0000000000194000 R11: 0000000000000005 R12: 0000000000000008
[ 400.349422] R13: 0000000000000000 R14: 000000c000476a80 R15: 0000000000000000
[ 400.349430] </TASK>
[ 400.349452]
[ 400.349454] Allocated by task 5800:
[ 400.349459] kasan_save_stack+0x30/0x50
[ 400.349469] kasan_save_track+0x14/0x30
[ 400.349475] __kasan_slab_alloc+0x89/0x90
[ 400.349482] kmem_cache_alloc_node_noprof+0xdc/0x2a0
[ 400.349492] bfq_get_queue+0x1ef/0x1100
[ 400.349502] __bfq_get_bfqq_handle_split+0x11a/0x510
[ 400.349511] bfq_insert_requests+0xf55/0x9030
[ 400.349519] blk_mq_flush_plug_list+0x446/0x14c0
[ 400.349527] __blk_flush_plug+0x27c/0x4e0
[ 400.349534] blk_finish_plug+0x52/0xa0
[ 400.349540] _xfs_buf_ioapply+0x739/0xc30 [xfs]
[ 400.350246] __xfs_buf_submit+0x1b2/0x640 [xfs]
[ 400.350967] xfs_buf_read_map+0x306/0xa20 [xfs]
[ 400.351672] xfs_trans_read_buf_map+0x285/0x7d0 [xfs]
[ 400.352386] xfs_imap_to_bp+0x107/0x270 [xfs]
[ 400.353077] xfs_iget+0x70d/0x1eb0 [xfs]
[ 400.353786] xfs_lookup+0x2ca/0x3a0 [xfs]
[ 400.354506] xfs_vn_lookup+0x14e/0x1a0 [xfs]
[ 400.355197] __lookup_slow+0x19c/0x340
[ 400.355204] lookup_one_unlocked+0xfc/0x120
[ 400.355211] ovl_lookup_single+0x1b3/0xcf0 [overlay]
[ 400.355255] ovl_lookup_layer+0x316/0x490 [overlay]
[ 400.355295] ovl_lookup+0x844/0x1fd0 [overlay]
[ 400.355351] lookup_one_qstr_excl+0xef/0x150
[ 400.355357] do_unlinkat+0x22a/0x620
[ 400.355366] __x64_sys_unlinkat+0x109/0x1e0
[ 400.355375] do_syscall_64+0x82/0x160
[ 400.355384] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 400.355393]
[ 400.355395] Freed by task 5800:
[ 400.355400] kasan_save_stack+0x30/0x50
[ 400.355407] kasan_save_track+0x14/0x30
[ 400.355413] kasan_save_free_info+0x3b/0x70
[ 400.355422] __kasan_slab_free+0x4f/0x70
[ 400.355429] kmem_cache_free+0x176/0x520
[ 400.355438] bfq_put_queue+0x67e/0x980
[ 400.355447] bfq_bic_update_cgroup+0x407/0x740
[ 400.355454] bfq_bio_merge+0x133/0x320
[ 400.355460] blk_mq_submit_bio+0x1761/0x1e20
[ 400.355467] __submit_bio+0x28b/0x7b0
[ 400.355473] submit_bio_noacct_nocheck+0x6b2/0xd30
[ 400.355480] iomap_readahead+0x50c/0x680
[ 400.355490] read_pages+0x17f/0x9c0
[ 400.355498] page_cache_ra_unbounded+0x366/0x4a0
[ 400.355505] filemap_fault+0x83d/0x2340
[ 400.355514] __xfs_filemap_fault+0x11a/0x7d0 [xfs]
[ 400.356204] __do_fault+0xf1/0x610
[ 400.356213] do_fault+0x977/0x11a0
[ 400.356221] __handle_mm_fault+0x5d1/0x850
[ 400.356230] handle_mm_fault+0x1f8/0x560
[ 400.356238] do_user_addr_fault+0x324/0x970
[ 400.356248] exc_page_fault+0x76/0xf0
[ 400.356258] asm_exc_page_fault+0x26/0x30
[ 400.356266]
[ 400.356269] The buggy address belongs to the object at ffff88881cab7bc0
which belongs to the cache bfq_queue of size 576
[ 400.356276] The buggy address is located 416 bytes inside of
freed 576-byte region [ffff88881cab7bc0, ffff88881cab7e00)
[ 400.356285]
[ 400.356287] The buggy address belongs to the physical page:
[ 400.356292] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88881cab0b00 pfn:0x81cab0
[ 400.356300] head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 400.356323] flags: 0x50000000000040(head|node=1|zone=2)
[ 400.356331] page_type: f5(slab)
[ 400.356340] raw: 0050000000000040 ffff88880a00c280 dead000000000122 0000000000000000
[ 400.356347] raw: ffff88881cab0b00 00000000802e0025 00000001f5000000 0000000000000000
[ 400.356354] head: 0050000000000040 ffff88880a00c280 dead000000000122 0000000000000000
[ 400.356359] head: ffff88881cab0b00 00000000802e0025 00000001f5000000 0000000000000000
[ 400.356365] head: 0050000000000003 ffffea002072ac01 ffffffffffffffff 0000000000000000
[ 400.356370] head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000
[ 400.356378] page dumped because: kasan: bad access detected
[ 400.356381]
[ 400.356383] Memory state around the buggy address:
[ 400.356387] ffff88881cab7c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 400.356392] ffff88881cab7c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 400.356397] >ffff88881cab7d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 400.356400] ^
[ 400.356405] ffff88881cab7d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 400.356409] ffff88881cab7e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 400.356413] ==================================================================
Cc: stable@vger.kernel.org
Fixes: bc3b1e9e7c50 ("block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()")
Signed-off-by: Zach Wade <zachwade.k@gmail.com>
Cc: Ding Hui <dinghui@sangfor.com.cn>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20241119153410.2546-1-zachwade.k@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
|
|
Rework CONFIG_KVM_X86's dependency to only check if KVM_INTEL or KVM_AMD
is selected, i.e. not 'n'. Having KVM_X86 depend directly on the vendor
modules results in KVM_X86 being set to 'm' if at least one of KVM_INTEL
or KVM_AMD is enabled, but neither is 'y', regardless of the value of KVM
itself.
The documentation for def_tristate doesn't explicitly state that this is
the intended behavior, but it does clearly state that the "if" section is
parsed as a dependency, i.e. the behavior is consistent with how tristate
dependencies are handled in general.
Optionally dependencies for this default value can be added with "if".
Fixes: ea4290d77bda ("KVM: x86: leave kvm.ko out of the build if no vendor module is requested")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241118172002.1633824-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Enabling KVM now causes a build failure on x86-32 if X86_LOCAL_APIC
is disabled:
arch/x86/kvm/svm/svm.c: In function 'svm_emergency_disable_virtualization_cpu':
arch/x86/kvm/svm/svm.c:597:9: error: 'kvm_rebooting' undeclared (first use in this function); did you mean 'kvm_irq_routing'?
597 | kvm_rebooting = true;
| ^~~~~~~~~~~~~
| kvm_irq_routing
arch/x86/kvm/svm/svm.c:597:9: note: each undeclared identifier is reported only once for each function it appears in
make[6]: *** [scripts/Makefile.build:221: arch/x86/kvm/svm/svm.o] Error 1
In file included from include/linux/rculist.h:11,
from include/linux/hashtable.h:14,
from arch/x86/kvm/svm/avic.c:18:
arch/x86/kvm/svm/avic.c: In function 'avic_pi_update_irte':
arch/x86/kvm/svm/avic.c:909:38: error: 'struct kvm' has no member named 'irq_routing'
909 | irq_rt = srcu_dereference(kvm->irq_routing, &kvm->irq_srcu);
| ^~
include/linux/rcupdate.h:538:17: note: in definition of macro '__rcu_dereference_check'
538 | typeof(*p) *local = (typeof(*p) *__force)READ_ONCE(p); \
Move the dependency to the same place as before.
Fixes: ea4290d77bda ("KVM: x86: leave kvm.ko out of the build if no vendor module is requested")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410060426.e9Xsnkvi-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sean Christopherson <seanjc@google.com>
[sean: add Cc to stable, tweak shortlog scope]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241118172002.1633824-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
setup_vmcs_config()"
Revert back to clearing VM_{ENTRY,EXIT}_LOAD_IA32_PERF_GLOBAL_CTRL in KVM's
golden VMCS config, as applying the workaround during vCPU creation is
pointless and broken. KVM *unconditionally* clears the controls in the
values returned by vmx_vmentry_ctrl() and vmx_vmexit_ctrl(), as KVM loads
PERF_GLOBAL_CTRL if and only if its necessary to do so. E.g. if KVM wants
to run the guest with the same PERF_GLOBAL_CTRL as the host, then there's
no need to re-load the MSR on entry and exit.
Even worse, the buggy commit failed to apply the erratum where it's
actually needed, add_atomic_switch_msr(). As a result, KVM completely
ignores the erratum for all intents and purposes, i.e. uses the flawed
VMCS controls to load PERF_GLOBAL_CTRL.
To top things off, the patch was intended to be dropped, as the premise
of an L1 VMM being able to pivot on FMS is flawed, and KVM can (and now
does) fully emulate the controls in software. Simply revert the commit,
as all upstream supported kernels that have the buggy commit should also
have commit f4c93d1a0e71 ("KVM: nVMX: Always emulate PERF_GLOBAL_CTRL
VM-Entry/VM-Exit controls"), i.e. the (likely theoretical) live migration
concern is a complete non-issue.
Opportunistically drop the manual "kvm: " scope from the warning about
the erratum, as KVM now uses pr_fmt() to provide the correct scope (v6.1
kernels and earlier don't, but the erratum only applies to CPUs that are
15+ years old; it's not worth a separate patch).
This reverts commit 9d78d6fb186bc4aff41b5d6c4726b76649d3cb53.
Link: https://lore.kernel.org/all/YtnZmCutdd5tpUmz@google.com
Fixes: 9d78d6fb186b ("KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()")
Cc: stable@vger.kernel.org
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-ID: <20241119011433.1797921-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso data page handling updates from Thomas Gleixner:
"First steps of consolidating the VDSO data page handling.
The VDSO data page handling is architecture specific for historical
reasons, but there is no real technical reason to do so.
Aside of that VDSO data has become a dump ground for various
mechanisms and fail to provide a clear separation of the
functionalities.
Clean this up by:
- consolidating the VDSO page data by getting rid of architecture
specific warts especially in x86 and PowerPC.
- removing the last includes of header files which are pulling in
other headers outside of the VDSO namespace.
- seperating timekeeping and other VDSO data accordingly.
Further consolidation of the VDSO page handling is done in subsequent
changes scheduled for the next merge window.
This also lays the ground for expanding the VDSO time getters for
independent PTP clocks in a generic way without making every
architecture add support seperately"
* tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/vdso: Add missing brackets in switch case
vdso: Rename struct arch_vdso_data to arch_vdso_time_data
powerpc: Split systemcfg struct definitions out from vdso
powerpc: Split systemcfg data out of vdso data page
powerpc: Add kconfig option for the systemcfg page
powerpc/pseries/lparcfg: Use num_possible_cpus() for potential processors
powerpc/pseries/lparcfg: Fix printing of system_active_processors
powerpc/procfs: Propagate error of remap_pfn_range()
powerpc/vdso: Remove offset comment from 32bit vdso_arch_data
x86/vdso: Split virtual clock pages into dedicated mapping
x86/vdso: Delete vvar.h
x86/vdso: Access vdso data without vvar.h
x86/vdso: Move the rng offset to vsyscall.h
x86/vdso: Access rng vdso data without vvar.h
x86/vdso: Access timens vdso data without vvar.h
x86/vdso: Allocate vvar page from C code
x86/vdso: Access rng data from kernel without vvar
x86/vdso: Place vdso_data at beginning of vvar page
x86/vdso: Use __arch_get_vdso_data() to access vdso data
x86/mm/mmap: Remove arch_vma_name()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects updates from Thomas Gleixner:
- Prevent destroying the kmem_cache on early failure.
Destroying a kmem_cache requires work queues to be set up, but in the
early failure case they are not yet initializated. So rather leak the
cache instead of triggering a BUG.
- Reduce parallel pool fill attempts.
Refilling the object pool requires to take the global pool lock,
which causes a massive performance issue when a large number of CPUs
attempt to refill concurrently. It turns out that it's sufficient to
let one CPU handle the refill from the to free list and in case there
are not enough objects on it to allocate new objects from the kmem
cache.
This also splits the free list handling from the actual allocation
path as that yields better results on RT where allocation is
restricted to preemptible code paths. The refill from free list has
no such restrictions.
- Consolidate the global and the per CPU pools to use the same data
structure, so all helper functions can be shared.
- Simplify the object allocation/free logic.
The allocation/free logic is an incomprehensible maze, which tries to
utilize the to free list and the global pool in the best way. This
all can be simplified into a straight forward comprehensible code
flow.
- Convert the allocation/free mechanism to batch mode.
Transferring objects from the global pool to the per CPU pools or
vice versa is done by walking the hlist and moving object by object.
That not only increases the pool lock held time, it also dirties up
to 17 cache lines.
This can be avoided by storing the pointer to the first object in a
batch of 16 objects in the objects themself and propagate it through
the batch when an object is enqueued into a pool or to a temporary
hlist head on allocation.
This allows to move batches of objects with at max four cache lines
dirtied and reduces the pool lock held time and therefore contention
significantly.
- Improve the object reusage
The current implementation is too agressively freeing unused objects,
which is counterproductive on bursty workloads like a kernel compile.
Address this by:
* increasing the per CPU pool size
* refilling the per CPU pool from the to be freed pool when the
per CPU pool emptied a batch
* keeping track of object usage with a exponentially wheighted
moving average which prevents the work queue callback to free
objects prematuraly.
This combined reduces the allocation/free rate for a full kernel
compile significantly:
kmem_cache_alloc() kmem_cache_free()
Baseline: 380k 330k
Improved: 170k 117k
- A few cleanups and a more cache line friendly layout of debug
information on top.
* tag 'core-debugobjects-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
debugobjects: Track object usage to avoid premature freeing of objects
debugobjects: Refill per CPU pool more agressively
debugobjects: Double the per CPU slots
debugobjects: Move pool statistics into global_pool struct
debugobjects: Implement batch processing
debugobjects: Prepare kmem_cache allocations for batching
debugobjects: Prepare for batching
debugobjects: Use static key for boot pool selection
debugobjects: Rework free_object_work()
debugobjects: Rework object freeing
debugobjects: Rework object allocation
debugobjects: Move min/max count into pool struct
debugobjects: Rename and tidy up per CPU pools
debugobjects: Use separate list head for boot pool
debugobjects: Move pools into a datastructure
debugobjects: Reduce parallel pool fill attempts
debugobjects: Make debug_objects_enabled bool
debugobjects: Provide and use free_object_list()
debugobjects: Remove pointless debug printk
debugobjects: Reuse put_objects() on OOM
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
- Put cpumask_test_cpu() check in switch_mm_irqs_off() under
CONFIG_DEBUG_VM, to micro-optimize the context-switching code (Rik
van Riel)
- Add missing details in virtual memory layout (Kirill A. Shutemov)
* tag 'x86-mm-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/tlb: Put cpumask_test_cpu() check in switch_mm_irqs_off() under CONFIG_DEBUG_VM
x86/mm/doc: Add missing details in virtual memory layout
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
- x86/boot: Remove unused function atou() (Dr. David Alan Gilbert)
- x86/cpu: Use str_yes_no() helper in show_cpuinfo_misc() (Thorsten
Blum)
- x86/platform: Switch back to struct platform_driver::remove() (Uwe
Kleine-König)
* tag 'x86-cleanups-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Remove unused function atou()
x86/cpu: Use str_yes_no() helper in show_cpuinfo_misc()
x86/platform: Switch back to struct platform_driver::remove()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 splitlock updates from Ingo Molnar:
- Move Split and Bus lock code to a dedicated file (Ravi Bangoria)
- Add split/bus lock support for AMD (Ravi Bangoria)
* tag 'x86-splitlock-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bus_lock: Add support for AMD
x86/split_lock: Move Split and Bus lock code to a dedicated file
|
|
QEMU for LoongArch does not yet support shutdown/restart through ACPI.
Use the pvpanic driver to enable shutdowns.
This requires 9.1.0 for shutdown support in pvpanic, but that is the
requirement of kunit on LoongArch anyways.
Link: https://lore.kernel.org/r/20241111-kunit-loongarch-v2-3-7676eb5f2da3@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Not all platforms support machine reboot.
If it a proper reboot is not supported the machine will hang.
Allow the QEMU configuration to override the necessary shutdown mode for
the specific system under test.
Link: https://lore.kernel.org/r/20241111-kunit-loongarch-v2-2-7676eb5f2da3@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add a basic config to run kunit tests on LoongArch.
This requires QEMU 9.1.0 or later for the necessary direct kernel boot
support.
Link: https://lore.kernel.org/r/20241111-kunit-loongarch-v2-1-7676eb5f2da3@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The alloc_string_stream() function only returns ERR_PTR(-ENOMEM) on
failure and never returns NULL. Therefore, switching the error check in
the caller from IS_ERR_OR_NULL to IS_ERR improves clarity, indicating
that this function will return an error pointer (not NULL) when an
error occurs. This change avoids any ambiguity regarding the function's
return behavior.
Link: https://lore.kernel.org/lkml/Zy9deU5VK3YR+r9N@visitorckw-System-Product-Name
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
kunit_kzalloc() may return a NULL pointer, dereferencing it without
NULL check may lead to NULL dereference.
Add a NULL check for test_state.
Link: https://lore.kernel.org/r/20241115054335.21673-1-zichenxie0106@gmail.com
Fixes: d03c720e03bd ("kunit: Add APIs for managing devices")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Update Brendan's email address for the KUnit entry.
Link: https://lore.kernel.org/r/20241115050510.56569-1-brendanhiggins@google.com
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
In kunit_debugfs_create_suite(), if alloc_string_stream() fails in the
kunit_suite_for_each_test_case() loop, the "suite->log = stream"
has assigned before, and the error path only free the suite->log's stream
memory but not set it to NULL, so the later string_stream_clear() of
suite->log in kunit_init_suite() will cause below UAF bug.
Set stream pointer to NULL after free to fix it.
Unable to handle kernel paging request at virtual address 006440150000030d
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[006440150000030d] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in: iio_test_gts industrialio_gts_helper cfg80211 rfkill ipv6 [last unloaded: iio_test_gts]
CPU: 5 UID: 0 PID: 6253 Comm: modprobe Tainted: G B W N 6.12.0-rc4+ #458
Tainted: [B]=BAD_PAGE, [W]=WARN, [N]=TEST
Hardware name: linux,dummy-virt (DT)
pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : string_stream_clear+0x54/0x1ac
lr : string_stream_clear+0x1a8/0x1ac
sp : ffffffc080b47410
x29: ffffffc080b47410 x28: 006440550000030d x27: ffffff80c96b5e98
x26: ffffff80c96b5e80 x25: ffffffe461b3f6c0 x24: 0000000000000003
x23: ffffff80c96b5e88 x22: 1ffffff019cdf4fc x21: dfffffc000000000
x20: ffffff80ce6fa7e0 x19: 032202a80000186d x18: 0000000000001840
x17: 0000000000000000 x16: 0000000000000000 x15: ffffffe45c355cb4
x14: ffffffe45c35589c x13: ffffffe45c03da78 x12: ffffffb810168e75
x11: 1ffffff810168e74 x10: ffffffb810168e74 x9 : dfffffc000000000
x8 : 0000000000000004 x7 : 0000000000000003 x6 : 0000000000000001
x5 : ffffffc080b473a0 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000001 x1 : ffffffe462fbf620 x0 : dfffffc000000000
Call trace:
string_stream_clear+0x54/0x1ac
__kunit_test_suites_init+0x108/0x1d8
kunit_exec_run_tests+0xb8/0x100
kunit_module_notify+0x400/0x55c
notifier_call_chain+0xfc/0x3b4
blocking_notifier_call_chain+0x68/0x9c
do_init_module+0x24c/0x5c8
load_module+0x4acc/0x4e90
init_module_from_file+0xd4/0x128
idempotent_init_module+0x2d4/0x57c
__arm64_sys_finit_module+0xac/0x100
invoke_syscall+0x6c/0x258
el0_svc_common.constprop.0+0x160/0x22c
do_el0_svc+0x44/0x5c
el0_svc+0x48/0xb8
el0t_64_sync_handler+0x13c/0x158
el0t_64_sync+0x190/0x194
Code: f9400753 d2dff800 f2fbffe0 d343fe7c (38e06b80)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
Link: https://lore.kernel.org/r/20241112080314.407966-1-ruanjinjie@huawei.com
Cc: stable@vger.kernel.org
Fixes: a3fdf784780c ("kunit: string-stream: Decouple string_stream from kunit")
Suggested-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core facilities:
- Add the "Lazy preemption" model (CONFIG_PREEMPT_LAZY=y), which
optimizes fair-class preemption by delaying preemption requests to
the tick boundary, while working as full preemption for
RR/FIFO/DEADLINE classes. (Peter Zijlstra)
- x86: Enable Lazy preemption (Peter Zijlstra)
- riscv: Enable Lazy preemption (Jisheng Zhang)
- Initialize idle tasks only once (Thomas Gleixner)
- sched/ext: Remove sched_fork() hack (Thomas Gleixner)
Fair scheduler:
- Optimize the PLACE_LAG when se->vlag is zero (Huang Shijie)
Idle loop:
- Optimize the generic idle loop by removing unnecessary memory
barrier (Zhongqiu Han)
RSEQ:
- Improve cache locality of RSEQ concurrency IDs for intermittent
workloads (Mathieu Desnoyers)
Waitqueues:
- Make wake_up_{bit,var} less fragile (Neil Brown)
PSI:
- Pass enqueue/dequeue flags to psi callbacks directly (Johannes
Weiner)
Preparatory patches for proxy execution:
- Add move_queued_task_locked helper (Connor O'Brien)
- Consolidate pick_*_task to task_is_pushable helper (Connor O'Brien)
- Split out __schedule() deactivate task logic into a helper (John
Stultz)
- Split scheduler and execution contexts (Peter Zijlstra)
- Make mutex::wait_lock irq safe (Juri Lelli)
- Expose __mutex_owner() (Juri Lelli)
- Remove wakeups from under mutex::wait_lock (Peter Zijlstra)
Misc fixes and cleanups:
- Remove unused __HAVE_THREAD_FUNCTIONS hook support (David
Disseldorp)
- Update the comment for TIF_NEED_RESCHED_LAZY (Sebastian Andrzej
Siewior)
- Remove unused bit_wait_io_timeout (Dr. David Alan Gilbert)
- remove the DOUBLE_TICK feature (Huang Shijie)
- fix the comment for PREEMPT_SHORT (Huang Shijie)
- Fix unnused variable warning (Christian Loehle)
- No PREEMPT_RT=y for all{yes,mod}config"
* tag 'sched-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
sched, x86: Update the comment for TIF_NEED_RESCHED_LAZY.
sched: No PREEMPT_RT=y for all{yes,mod}config
riscv: add PREEMPT_LAZY support
sched, x86: Enable Lazy preemption
sched: Enable PREEMPT_DYNAMIC for PREEMPT_RT
sched: Add Lazy preemption model
sched: Add TIF_NEED_RESCHED_LAZY infrastructure
sched/ext: Remove sched_fork() hack
sched: Initialize idle tasks only once
sched: psi: pass enqueue/dequeue flags to psi callbacks directly
sched/uclamp: Fix unnused variable warning
sched: Split scheduler and execution contexts
sched: Split out __schedule() deactivate task logic into a helper
sched: Consolidate pick_*_task to task_is_pushable helper
sched: Add move_queued_task_locked helper
locking/mutex: Expose __mutex_owner()
locking/mutex: Make mutex::wait_lock irq safe
locking/mutex: Remove wakeups from under mutex::wait_lock
sched: Improve cache locality of RSEQ concurrency IDs for intermittent workloads
sched: idle: Optimize the generic idle loop by removing needless memory barrier
...
|
|
Currently if an fopen fails the error exit path is via code that
checks if fp is not null and closes the file, however, fp is null
so this check and close is redundant. Since the only use of the
err exit label is on the fopen check, remove it and replace the
code with a simple return of errno. Also remove variable rc since
it's no longer required.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Fan Wu <wufan@kernel.org>
|
