| Age | Commit message (Collapse) | Author |
|---|
|
ARM exclusively uses GENERIC_IRQ_MULTI_HANDLER, so at some point
set_handle_irq() needs to be called to handle system-wide
interrupts.
For all DT-enabled boards, this call happens down in the
drivers/irqchip subsystem, after locating the target irqchip
driver from the device tree.
We still have a few instances of the boardfiles with machine
descriptors passing a machine-specific .handle_irq() to the
ARM kernel core.
Get rid of this by letting the few remaining machines consistently
call set_handle_irq() from the end of the .init_irq() callback
instead and diet down one member from the machine descriptor.
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Smatch complains that these error paths are missing cleanup:
drivers/mtd/mtdcore.c:983 mtd_otp_nvmem_add()
warn: missing unwind goto?
This needs to call nvmem_unregister(mtd->otp_user_nvmem) before
returning.
Fixes: 3b270fac8443 ("mtd: otp: Put factory OTP/NVRAM into the entropy pool")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/fe7ef901-9571-4c6e-a40e-449046efe2c6@moroto.mountain
|
|
"linux,rootfs" is missing a type, add it.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230613201014.2823185-1-robh@kernel.org
|
|
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230611204327.828122-1-u.kleine-koenig@pengutronix.de
|
|
Support for OTP area access on MX30LFxG18AC chip series.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230615094015.3780078-1-AVKrasnov@sberdevices.ru
|
|
Meson NAND controller requires 8 bytes alignment for DMA addresses,
otherwise it "aligns" passed address by itself thus accessing invalid
location in the provided buffer. This patch makes unaligned buffers to
be reallocated to become valid.
Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230615080815.3291006-1-AVKrasnov@sberdevices.ru
|
|
Sandisk SDTNQGAMA is a 8GB size, 3.3V 8 bit chip with 16KB page size,
1KB write size and 40 bit ecc support
Co-developed-by: Paweł Jarosz <paweljarosz3691@gmail.com>
Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/98811c98-4681-6ddc-8287-bd9b77559c51@gmail.com
|
|
Add basic Sandisk manufacturer ops support to get
SDTNQGAMA timing data with the nand_get_sdr_timings()
function.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/aaf4580a-a368-8f70-c9c4-21b5ed4dd599@gmail.com
|
|
'core' and 'x86/amd' into next
|
|
ppc_save_regs() skips one stack frame while saving the CPU register states.
Instead of saving current R1, it pulls the previous stack frame pointer.
When vmcores caused by direct panic call (such as `echo c >
/proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the
backtrace correctly. On further analysis, it was found that it was because
of mismatch between r1 and NIP.
GDB uses NIP to get current function symbol and uses corresponding debug
info of that function to unwind previous frames, but due to the
mismatching r1 and NIP, the unwinding does not work, and it fails to
unwind to the 2nd frame and hence does not show the backtrace.
GDB backtrace with vmcore of kernel without this patch:
---------
(gdb) bt
#0 0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>,
newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69
#1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974
#2 0x0000000000000063 in ?? ()
#3 0xc000000003579320 in ?? ()
---------
Further analysis revealed that the mismatch occurred because
"ppc_save_regs" was saving the previous stack's SP instead of the current
r1. This patch fixes this by storing current r1 in the saved pt_regs.
GDB backtrace with vmcore of patched kernel:
--------
(gdb) bt
#0 0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8)
at ./arch/powerpc/include/asm/kexec.h:69
#1 __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974
#2 0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n")
at kernel/panic.c:358
#3 0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155
#4 0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false)
at drivers/tty/sysrq.c:602
#5 0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>,
count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163
#6 0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>,
buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340
#7 proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>,
ppos=<optimized out>) at fs/proc/inode.c:352
#8 0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00,
buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>,
count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582
#9 0xc0000000005b4264 in ksys_write (fd=<optimized out>,
buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2)
at fs/read_write.c:637
#10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>)
at arch/powerpc/kernel/syscall.c:171
#11 0xc00000000000c270 in system_call_vectored_common ()
at arch/powerpc/kernel/interrupt_64.S:192
--------
Nick adds:
So this now saves regs as though it was an interrupt taken in the
caller, at the instruction after the call to ppc_save_regs, whereas
previously the NIP was there, but R1 came from the caller's caller and
that mismatch is what causes gdb's dwarf unwinder to go haywire.
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Fixes: d16a58f8854b1 ("powerpc: Improve ppc_save_regs()")
Reivewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230615091047.90433-1-adityag@linux.ibm.com
|
|
Ftrace on ppc32 expects a three instruction sequence at the beginning of
each function when specifying -pg:
mflr r0
stw r0,4(r1)
bl _mcount
This is the case with all supported versions of gcc. Clang however emits
a branch to _mcount after the function prologue, similar to the pre
-mprofile-kernel ABI on ppc64. This is not supported.
Disable ftrace on ppc32 if using clang for now. This can be re-enabled
later if clang picks up support for -fpatchable-function-entry on ppc32.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/llvm/llvm-project/issues/63220
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230609034501.407971-1-naveen@kernel.org
|
|
Currently pointer iov is being dereferenced before the null check of iov
which can lead to null pointer dereference errors. Fix this by moving the
iov null check before the dereferencing.
Detected using cppcheck static analysis:
linux/arch/powerpc/platforms/powernv/pci-sriov.c:597:12: warning: Either
the condition '!iov' is redundant or there is possible null pointer
dereference: iov. [nullPointerRedundantCheck]
num_vfs = iov->num_vfs;
^
Fixes: 052da31d45fc ("powerpc/powernv/sriov: De-indent setup and teardown")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230608095849.1147969-1-colin.i.king@gmail.com
|
|
Add a utility 'lsdexcr' to print the current DEXCR status. Useful for
quickly checking the status such as when debugging test failures or
verifying the new default DEXCR does what you want (for userspace at
least). Example output:
# ./lsdexcr
uDEXCR: 04000000 (NPHIE)
HDEXCR: 00000000
Effective: 04000000 (NPHIE)
SBHE (0): clear (Speculative branch hint enable)
IBRTPD (3): clear (Indirect branch recurrent target ...)
SRAPD (4): clear (Subroutine return address ...)
NPHIE * (5): set (Non-privileged hash instruction enable)
PHIE (6): clear (Privileged hash instruction enable)
DEXCR[NPHIE] enabled: hashst/hashchk working
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-12-bgray@linux.ibm.com
|
|
Test the kernel DEXCR[NPHIE] interface and hashchk exception handling.
Introduces with it a DEXCR utils library for common DEXCR operations.
Volatile is used to prevent the compiler optimising away the signal
tests.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-11-bgray@linux.ibm.com
|
|
Adds _MSG assertion variants to provide more context behind why a
failure occurred. Also include unistd.h for _exit() and stdio.h for
fprintf(), and move ARRAY_SIZE macro to utils.h.
The _MSG variants and ARRAY_SIZE will be used by the following
DEXCR selftests.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-10-bgray@linux.ibm.com
|
|
Describe the DEXCR and document how to configure it.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-9-bgray@linux.ibm.com
|
|
The HASHKEYR register contains a secret per-process key to enable unique
hashes per process. In general it should not be exposed to userspace
at all and a regular process has no need to know its key.
However, checkpoint restore in userspace (CRIU) functionality requires
that a process be able to set the HASHKEYR of another process, otherwise
existing hashes on the stack would be invalidated by a new random key.
Exposing HASHKEYR in this way also makes it appear in core dumps, which
is a security concern. Multiple threads may share a key, for example
just after a fork() call, where the kernel cannot know if the child is
going to return back along the parent's stack. If such a thread is
coerced into making a core dump, then the HASHKEYR value will be
readable and able to be used against all other threads sharing that key,
effectively undoing any protection offered by hashst/hashchk.
Therefore we expose HASHKEYR to ptrace when CONFIG_CHECKPOINT_RESTORE is
enabled, providing a choice of increased security or migratable ROP
protected processes. This is similar to how ARM exposes its PAC keys.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-8-bgray@linux.ibm.com
|
|
The DEXCR register is of interest when ptracing processes. Currently it
is static, but eventually will be dynamically controllable by a process.
If a process can control its own, then it is useful for it to be
ptrace-able to (e.g., for checkpoint-restore functionality).
It is also relevant to core dumps (the NPHIE aspect in particular),
which use the ptrace mechanism (or is it the other way around?) to
decide what to dump. The HDEXCR is useful here too, as the NPHIE aspect
may be set in the HDEXCR without being set in the DEXCR. Although the
HDEXCR is per-cpu and we don't track it in the task struct (it's useless
in normal operation), it would be difficult to imagine why a hypervisor
would set it to different values within a guest. A hypervisor cannot
safely set NPHIE differently at least, as that would break programs.
Expose a read-only view of the userspace DEXCR and HDEXCR to ptrace.
The HDEXCR is always readonly, and is useful for diagnosing the core
dumps (as the HDEXCR may set NPHIE without the DEXCR setting it).
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
[mpe: Use lower_32_bits() rather than open coding]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-7-bgray@linux.ibm.com
|
|
The ISA 3.1B hashst and hashchk instructions use a per-cpu SPR HASHKEYR
to hold a key used in the hash calculation. This key should be different
for each process to make it harder for a malicious process to recreate
valid hash values for a victim process.
Add support for storing a per-thread hash key, and setting/clearing
HASHKEYR appropriately.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-6-bgray@linux.ibm.com
|
|
Recognise and pass the appropriate signal to the user program when a
hashchk instruction triggers. This is independent of allowing
configuration of DEXCR[NPHIE], as a hypervisor can enforce this aspect
regardless of the kernel.
The signal mirrors how ARM reports their similar check failure. For
example, their FPAC handler in arch/arm64/kernel/traps.c do_el0_fpac()
does this. When we fail to read the instruction that caused the fault
we send a segfault, similar to how emulate_math() does it.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-5-bgray@linux.ibm.com
|
|
ISA 3.1B introduces the Dynamic Execution Control Register (DEXCR). It
is a per-cpu register that allows control over various CPU behaviours
including branch hint usage, indirect branch speculation, and
hashst/hashchk support.
Add some definitions and basic support for the DEXCR in the kernel.
Right now it just
* Initialises the DEXCR and HASHKEYR to a fixed value when a CPU
onlines.
* Clears them in reset_sprs().
* Detects when the NPHIE aspect is supported (the others don't get
looked at in this series, so there's no need to waste a CPU_FTR
on them).
We initialise the HASHKEYR to ensure that all cores have the same key,
so an HV enforced NPHIE + swapping cores doesn't randomly crash a
process using hash instructions. The stores to HASHKEYR are
unconditional because the ISA makes no mention of the SPR being missing
if support for doing the hashes isn't present. So all that would happen
is the HASHKEYR value gets ignored. This helps slightly if NPHIE
detection fails; e.g., we currently only detect it on pseries.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
[mpe: Use simple values for DEXCR constants]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-4-bgray@linux.ibm.com
|
|
ptrace-decl.h uses user_regset_get2_fn (among other things) from
regset.h. While all current users of ptrace-decl.h include regset.h
before it anyway, it adds an implicit ordering dependency and breaks
source tooling that tries to inspect ptrace-decl.h by itself.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-3-bgray@linux.ibm.com
|
|
The functions here use struct task_struct fields, so need to import
the full definition from <linux/sched.h>. The <asm/current.h> header
that defines current only forward declares struct task_struct.
Failing to include this <linux/sched.h> header leads to a compilation
error when a translation unit does not also include <linux/sched.h>
indirectly.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230616034846.311705-2-bgray@linux.ibm.com
|
|
The trace output for the HRTIMER_MODE_.*_HARD modes is seen as a number
since these modes are not decoded. The author was not aware of the fancy
decoding function which makes the life easier.
Extend decode_hrtimer_mode() with the additional HRTIMER_MODE_.*_HARD
modes.
Fixes: ae6683d815895 ("hrtimer: Introduce HARD expiry mode")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230418143854.8vHWQKLM@linutronix.de
|
|
Replace integer constants with NULL. Resolves the following
warnings:
../drivers/video/fbdev/hitfb.c:447:23: warning: Using plain integer as NULL pointer
../drivers/video/fbdev/hitfb.c:465:23: warning: Using plain integer as NULL pointer
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fix the type casting from unsigned long to char __iomem *. Resolves
the following warning:
../drivers/video/fbdev/hitfb.c:411:27: warning: incorrect type in assignment (different address spaces)
../drivers/video/fbdev/hitfb.c:411:27: expected char [noderef] __iomem *screen_base
../drivers/video/fbdev/hitfb.c:411:27: got void *
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The VIA fbdev exposes a custom GPIO chip for its GPIOs, these
are in turn looked up the camera driver using a custom API.
Drop the custom API, provide a look-up table and convert to
GPIO descriptors. Note proper polarity on the RESET line.
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct hdmi_avi_infoframe'
from 68 to 60 bytes.
It saves a few bytes of memory and is more cache-line friendly.
This also reduces the union hdmi_infoframe the same way.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The module loads firmware so add a MODULE_FIRMWARE macro to provide that
information via modinfo.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The module loads firmware so add a MODULE_FIRMWARE macro to provide that
information via modinfo.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Fixes the following warnings:
../drivers/video/fbdev/hitfb.c:186:5: warning: no previous prototype for 'hitfb_blank' [-Wmissing-prototypes]
186 | int hitfb_blank(int blank_mode, struct fb_info *info)
| ^~~~~~~~~~~
../drivers/video/fbdev/hitfb.c:186:5: warning: symbol 'hitfb_blank' was not declared. Should it be static?
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
New additions to the list have tried to respect alphanumeric ordering,
but the thing was out of order to start with. Sort it.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.5.. this includes a backmerg of drm-next tree to be able
to use new DRM DSC helpers.
Core:
+ Add Marijn Suijten as drm/msm reviewer
+ Adreno A660 bindings
+ SM8350 MDSS bindings fix
+ Fix adreno_is_a690() warnings
+ More generic (DRM) and MSM-specific DSC helpers
DP:
+ Removed obsolete USB-PD remains
+ Documented DP compatible string for sm8550 platform
DPU:
+ Enable missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
+ Enabled writeback on sc7280
+ Implemented tearcheck support to support vsync on SM150 and
newer platforms
+ Native HDMI output support
+ Dropped unused features: regdma, GC, IGC
+ Fixed the DSC flush operations
+ Simplified QoS handling, removing obsolete and unused features
and merging SSPP and WB code paths
+ Reworked dpu_encoder initialisation path
+ Enabled DSPP support on sdm845
+ Disabled color-management if DSPP blocks are not available
+ Added support for DSC 1.2 blocks found on sm8350 and later
+ Added .fb_dirty to fix CMD panels
DSI:
+ Drop powerup quirks in favour of using pre_enable_prev_first for
downstream bridges
+ Fixed 14nm DSI PHY programming
+ Added support for DSI and 28nm DSI PHY on MSM8226 platform
+ Make use of DRM and MSM DSC helpers
MDP5:
+ Added support for display controller on MSM8226 platform
GPU:
+ A690 support
+ Don't set IO_PGTABLE_QUIRK_ARM_OUTER_WBWA on devices with coherent SMMU
(like A690)
+ Move cmdstream dumping out of fence signaling path
+ Cleanups
+ Support for a6xx devices without GMU (aka "GMU wrapper"
+ a610 support
+ a619_holi support (a619 variant without GMU)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsUB=tRB4nR6ZCJMuLhro5zN3BQWUSywVYbaipqqDZ_cQ@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Linux 6.4-rc7
Need this to pull in the msm work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The MT6380 regulator typically used together with MT7622 does not
support the current maximum processor and SRAM voltage in the cpufreq
driver (1360000uV).
For MT7622 limit processor and SRAM supply voltages to 1350000uV to
avoid having the tracking algorithm request unsupported voltages from
the regulator.
On MT7623 there is no separate SRAM supply and the maximum voltage used
is 1300000uV. Create dedicated platform data for MT7623 to cover that
case as well.
Fixes: 0883426fd07e3 ("cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623")
Suggested-by: Jia-wei Chang <Jia-wei.Chang@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add support for the Armada AP807 die to armada-8k. This uses a
different compatible for the CPU clock which needs to be added to
the cpufreq driver.
This commit takes a different approach to the WindRiver patch
"cpufreq: armada: enable ap807-cpu-clk" in that rather than calling
of_find_compatible_node() for each compatible, we use a table of
IDs instead.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
While adding support for "performance states" in the OPP and genpd core,
it was decided to set the `pstate` field via genpd's
pm_genpd_opp_to_performance_state() helper, to allow platforms to set
`pstate` even if they don't have a corresponding `level` field in the DT
OPP tables (More details are present in commit 6e41766a6a50 ("PM /
Domain: Implement of_genpd_opp_to_performance_state()")).
Revisiting that five years later clearly suggests that it was
over-designed as all current users are eventually using the `level`
value only.
The previous commit already added necessary checks to make sure pstate
is only used for genpd tables. Lets now simplify this a little, and use
`level` directly and remove `pstate` field altogether.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
It is not very clear right now that the `pstate` field is only valid for
genpd OPP tables and not consumer tables. And there is no checking for
the same at various places.
Add checks in place to verify that and make it clear to the reader.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Bjorn Andersson <quic_bjorande@quicinc.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.5-2023-06-16:
amdgpu:
- Misc display fixes
- W=1 fixes
- Improve scheduler naming
- DCN 3.1.4 fixes
- kdoc fixes
- Enable W=1
- VCN 4.0 fix
- xgmi fixes
- TOPDOWN fix for large BAR systems
- eDP fix
- PSR fixes
- SubVP fixes
- Freesync fix
- DPIA fix
- SMU 13.0.5 fixes
- vblflash fix
- RAS fixes
- SDMA 4 fix
- BO locking fix
- BO backing store fix
- NBIO 7.9 fixes
- GC 9.4.3 fixes
- GPU reset recovery fixes
- HMM fix
amdkfd:
- Fix NULL check
- Trap fixes
- Queue count fix
- Add event age tracking
radeon:
- fbdev client fix
scheduler:
- Avoid an infinite loop
UAPI:
- Add KFD event age tracking:
Proposed ROCT-Thunk-Interface:
https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/commit/efdbf6cfbc026bd68ac3c35d00dacf84370eb81e
https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/commit/1820ae0a2db85b6f584611dc0cde1a00e7c22915
Proposed ROCR-Runtime:
https://github.com/RadeonOpenCompute/ROCR-Runtime/compare/master...zhums:ROCR-Runtime:new_event_wait_review
https://github.com/RadeonOpenCompute/ROCR-Runtime/commit/e1f5bdb88eb882ac798aeca2c00ea3fbb2dba459
https://github.com/RadeonOpenCompute/ROCR-Runtime/commit/7d26afd14107b5c2a754c1a3f415d89f3aabb503
drm:
- DP MST fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230616163548.7706-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
* Fix fbdev initializer macros
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615114009.GA27261@linux-uq9g
|
|
|
|
The sys_ni_posix_timers() definition causes a warning when the declaration
is missing, so this needs to be added along with the normal syscalls,
outside of the #ifdef.
kernel/time/posix-stubs.c:26:17: error: no previous prototype for 'sys_ni_posix_timers' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230607142925.3126422-1-arnd@kernel.org
|
|
The ratelimit logic in report_idle_softirq() is broken because the
exit condition is always true:
static int ratelimit;
if (ratelimit < 10)
return false; ---> always returns here
ratelimit++; ---> no chance to run
Make it check for >= 10 instead.
Fixes: 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle")
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/tencent_5AAA3EEAB42095C9B7740BE62FBF9A67E007@qq.com
|
|
Pointers of type void * do not require a type cast when they are assigned
to a real pointer.
Signed-off-by: Li zeming <zeming@nfschina.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230609182059.4509-1-zeming@nfschina.com
|
|
ret is assigned before checked, so it does not need to initialize the
variable
Signed-off-by: Li zeming <zeming@nfschina.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230609182856.4660-1-zeming@nfschina.com
|
|
Commit c78f261e5dcb ("posix-timers: Clarify posix_timer_fn() comments")
turns an ifdef CONFIG_HIGH_RES_TIMERS into an conditional on
"IS_ENABLED(CONFIG_HIGHRES_TIMERS)"; note that the new conditional refers
to "HIGHRES_TIMERS" not "HIGH_RES_TIMERS" as before.
Fix this typo introduced in that refactoring.
Fixes: c78f261e5dcb ("posix-timers: Clarify posix_timer_fn() comments")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230609094643.26253-1-lukas.bulwahn@gmail.com
|
|
Make it consistent with the TIP tree documentation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230425183313.888493625@linutronix.de
|
|
Documenting the obvious is just consuming space for no value.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230425183313.832240451@linutronix.de
|
|
Make the issues vs. SIG_IGN understandable and remove the 15 years old
promise that a proper solution is already on the horizon.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/874jnrdmrq.ffs@tglx
|
|
Yet another incomprehensible piece of art.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230425183313.724863461@linutronix.de
|
