summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-09-18drm/i915/cnp: set min brightness from VBTLee, Shawn C
Min brightness value from vbt was missing for CNP platform. This setting have to refer backlight ic spec to restrict min backlight output. Without this restriction, driver would allow to configure lower brightness value and violate backlight ic requirement. Fixes: 4c9f7086ac6d ("drm/i915/cnp: Backlight support for CNP.") Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Shawn Lee <shawn.c.lee@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1505279961-16140-1-git-send-email-shawn.c.lee@intel.com (cherry picked from commit f44e354f857f207cd361269c5e38e1f96e0b616c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-09-18Revert "drm/i915/bxt: Disable device ready before shutdown command"Uma Shankar
This reverts commit bbdf0b2ff32a ("drm/i915/bxt: Disable device ready before shutdown command"). Disable device ready before shutdown command was added previously to avoid a split screen issue seen on dual link DSI panels. As of now, dual link is not supported and will need some rework in the upstream code. For single link DSI panels, the change is not required. This will cause failure in sending SHUTDOWN packet during disable. Hence reverting the change. Will handle the change as part of dual link enabling in upstream. Fixes: bbdf0b2ff32a ("drm/i915/bxt: Disable device ready before shutdown command") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1504604671-17237-1-git-send-email-vidya.srinivas@intel.com (cherry picked from commit 33c8d8870c67faf3161898a56af98ac3c1c71450) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-09-18drm/i915/bxt: set min brightness from VBTLee, Shawn C
Min brightness value from vbt was missing for BXT platform. This setting have to refer backlight ic spec to restrict min backlight output. Without this restriction, driver would allow to configure lower brightness value and violate backlight ic requirement. Fixes: 0fb890c01349 ("drm/i915/bxt: BLC implementation") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Cc: Gary C Wang <gary.c.wang@intel.com> Signed-off-by: Shawn Lee <shawn.c.lee@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1505187390-7039-1-git-send-email-shawn.c.lee@intel.com (cherry picked from commit c3881128cb672cf484a52fbb36b5daa9044d9168) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-09-18drm/i915: Fix an error handling in 'intel_framebuffer_init()'Christophe JAILLET
We should go through the error handling path to decrease the 'framebuffer_references' as done everywhere else in this function. Fixes: 2e2adb05736c ("drm/i915: Add render decompression support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170910085642.13673-1-christophe.jaillet@wanadoo.fr (cherry picked from commit 37875d6b3af702425ce292de81b77faf94766616) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-09-18drm/i915/gvt: Fix incorrect PCI BARs reportingChangbin Du
Looking at our virtual PCI device, we can see surprising Region 4 and Region 5. 00:10.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 06) (prog-if 00 [VGA controller]) .... Region 0: Memory at 140000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at 180000000 (64-bit, prefetchable) [size=1G] Region 4: Memory at <ignored> (32-bit, non-prefetchable) Region 5: Memory at <ignored> (32-bit, non-prefetchable) Expansion ROM at febd6000 [disabled] [size=2K] The fact is that we only implemented BAR0 and BAR2. Surprising Region 4 and Region 5 are shown because we report their size as 0xffffffff. They should report size 0 instead. BTW, the physical GPU has a PIO BAR. GVTg hasn't implemented PIO access, so we ignored this BAR for vGPU device. v2: fix BAR size value calculation. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458032 Signed-off-by: Changbin Du <changbin.du@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> (cherry picked from commit f1751362d6357a90bc6e53176cec715ff2dbed74) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-09-18ip6_gre: skb_push ipv6hdr before packing the header in ip6gre_headerXin Long
Now in ip6gre_header before packing the ipv6 header, it skb_push t->hlen which only includes encap_hlen + tun_hlen. It means greh and inner header would be over written by ipv6 stuff and ipv6h might have no chance to set up. Jianlin found this issue when using remote any on ip6_gre, the packets he captured on gre dev are truncated: 22:50:26.210866 Out ethertype IPv6 (0x86dd), length 120: truncated-ip6 -\ 8128 bytes missing!(flowlabel 0x92f40, hlim 0, next-header Options (0) \ payload length: 8192) ::1:2000:0 > ::1:0:86dd: HBH [trunc] ip-proto-128 \ 8184 It should also skb_push ipv6hdr so that ipv6h points to the right position to set ipv6 stuff up. This patch is to skb_push hlen + sizeof(*ipv6h) and also fix some indents in ip6gre_header. Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18nl80211: fix null-ptr dereference on invalid mesh configurationJohannes Berg
If TX rates are specified during mesh join, the channel must also be specified. Check the channel pointer to avoid a null pointer dereference if it isn't. Reported-by: Jouni Malinen <j@w1.fi> Fixes: 8564e38206de ("cfg80211: add checks for beacon rate, extend to mesh") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-18udpv6: Fix the checksum computation when HW checksum does not applySubash Abhinov Kasiviswanathan
While trying an ESP transport mode encryption for UDPv6 packets of datagram size 1436 with MTU 1500, checksum error was observed in the secondary fragment. This error occurs due to the UDP payload checksum being missed out when computing the full checksum for these packets in udp6_hwcsum_outgoing(). Fixes: d39d938c8228 ("ipv6: Introduce udpv6_send_skb()") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18Merge tag 'mmc-v4.14-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix trivial typo in Kconfig - Fixup initialization of mmc block requests MMC host: - cavium: Fix use-after-free bug reported by KASAN" * tag 'mmc-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: cavium: Fix use-after-free in of_platform_device_destroy mmc: host: fix typo after MMC_DEBUG move mmc: block: Fix incorrectly initialized requests
2017-09-18netfilter: ipset: ipset list may return wrong member count for set with timeoutVishwanath Pai
Simple testcase: $ ipset create test hash:ip timeout 5 $ ipset add test 1.2.3.4 $ ipset add test 1.2.2.2 $ sleep 5 $ ipset l Name: test Type: hash:ip Revision: 5 Header: family inet hashsize 1024 maxelem 65536 timeout 5 Size in memory: 296 References: 0 Number of entries: 2 Members: We return "Number of entries: 2" but no members are listed. That is because mtype_list runs "ip_set_timeout_expired" and does not list the expired entries, but set->elements is never upated (until mtype_gc cleans it up later). Reviewed-by: Joshua Hunt <johunt@akamai.com> Signed-off-by: Vishwanath Pai <vpai@akamai.com> Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-09-18netfilter: nat: Do not use ARRAY_SIZE() on spinlocks to fix zero divGeert Uytterhoeven
If no spinlock debugging options (CONFIG_GENERIC_LOCKBREAK, CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_LOCK_ALLOC) are enabled on a UP platform (e.g. m68k defconfig), arch_spinlock_t is an empty struct, hence using ARRAY_SIZE(nf_nat_locks) causes a division by zero: net/netfilter/nf_nat_core.c: In function ‘nf_nat_setup_info’: net/netfilter/nf_nat_core.c:432: warning: division by zero net/netfilter/nf_nat_core.c: In function ‘__nf_nat_cleanup_conntrack’: net/netfilter/nf_nat_core.c:535: warning: division by zero net/netfilter/nf_nat_core.c:537: warning: division by zero net/netfilter/nf_nat_core.c: In function ‘nf_nat_init’: net/netfilter/nf_nat_core.c:810: warning: division by zero net/netfilter/nf_nat_core.c:811: warning: division by zero net/netfilter/nf_nat_core.c:824: warning: division by zero Fix this by using the CONNTRACK_LOCKS definition instead. Suggested-by: Florian Westphal <fw@strlen.de> Fixes: 8073e960a03bf7b5 ("netfilter: nat: use keyed locks") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-09-18xen: don't compile pv-specific parts if XEN_PV isn't configuredJuergen Gross
xenbus_client.c contains some functions specific for pv guests. Enclose them with #ifdef CONFIG_XEN_PV to avoid compiling them when they are not needed (e.g. on ARM). Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-09-18mtd: nand: remove unused blockmask variableCorentin Labbe
This patch fix the following build warning: drivers/mtd/nand/nand_base.c:2671:30: attention : variable ‘blockmask’ set but not used [-Wunused-but-set-variable] Fixes: 0b4773fd1649 ("mtd: nand: Drop unused cached programming support") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-09-18PM / QoS: Use the correct variable to check the QoS request typeJan H. Schönherr
Use the actual function argument for the validation of the request type, instead of the type field in a fresh (supposedly zero-initialized) request structure. Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-18ACPI / PMIC: Add code reviewers to MAINTAINERSRafael Wysocki
Andy and Mika review code changes under drivers/acpi/pmic/ on a regular basis and I rely on their help with that, so add them as code reviwewers for that part of the kernel. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-09-18driver core: Fix link to device power management documentationGeert Uytterhoeven
Correct location as of commit 2728b2d2e5be4b82 (PM / core / docs: Convert sleep states API document to reST). Fixes: 2728b2d2e5be4b82 (PM / core / docs: Convert sleep states API document to reST) Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-18arm64: ensure the kernel is compiled for LP64Andrew Pinski
The kernel needs to be compiled as a LP64 binary for ARM64, even when using a compiler that defaults to code-generation for the ILP32 ABI. Consequently, we need to explicitly pass '-mabi=lp64' (supported on gcc-4.9 and newer). Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Reviewed-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-09-18arm64: relax assembly code alignment from 16 byte to 4 byteMasahiro Yamada
Aarch64 instructions must be word aligned. The current 16 byte alignment is more than enough. Relax it into 4 byte alignment. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-09-18arm64: efi: Don't include EFI fpsimd save/restore code in non-EFI kernelsDave Martin
__efi_fpsimd_begin()/__efi_fpsimd_end() are for use when making EFI calls only, so using them in non-EFI kernels is not allowed. This patch compiles them out if CONFIG_EFI is not set. Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-09-18mtd: nand: lpc32xx_mlc: Fix an error handling path in lpc32xx_nand_probe()Christophe JAILLET
If 'clk_prepare_enable()' fails, we must 'put' the corresponding clock. Fixes: 4d26f012ab59 ("mtd: nand: lpc32xx_mlc: Handle return value of clk_prepare_enable.") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-09-18mtd: spi-nor: fix DMA unsafe buffer issue in spi_nor_read_sfdp()Cyrille Pitchen
spi_nor_read_sfdp() calls nor->read() to read the SFDP data. When the m25p80 driver is used (pretty common case), nor->read() is then implemented by the m25p80_read() function, which is likely to initialize a 'struct spi_transfer' from its buf argument before appending this structure inside the 'struct spi_message' argument of spi_sync(). Besides the SPI sub-system states that both .tx_buf and .rx_buf members of 'struct spi_transfer' must point into dma-safe memory. However, two of the three calls of spi_nor_read_sfdp() were given pointers to stack allocated memory as buf argument, hence not in a dma-safe area. Hopefully, the third and last call of spi_nor_read_sfdp() was already given a kmalloc'ed buffer argument, hence dma-safe. So this patch fixes this issue by introducing a spi_nor_read_sfdp_dma_unsafe() function which simply wraps the existing spi_nor_read_sfdp() function and uses some kmalloc'ed memory as a bounce buffer. Fixes: f384b352cbf0 ("mtd: spi-nor: parse Serial Flash Discoverable Parameters (SFDP) tables") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-09-18mtd: spi-nor: Check consistency of the memory size extracted from the SFDPBoris Brezillon
One field of the flash parameter table contains information about the flash device size. Most of the time the data extracted from this field is valid, but sometimes the BFPT section of the SFDP table is corrupted or invalid and this field is set to 0xffffffff, thus resulting in an integer overflow when setting params->size. Since NOR devices are anayway always smaller than 2^64 bytes, we can easily stop the BFPT parsing if the size reported in this table is invalid. Fixes: f384b352cbf0 ("mtd: spi-nor: parse Serial Flash Discoverable Parameters (SFDP) tables") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.com>
2017-09-18clocksource/integrator: Fix section mismatch warningArnd Bergmann
gcc-4.6 and older fail to inline integrator_clocksource_init, so they end up showing a harmless warning: WARNING: vmlinux.o(.text+0x4aa94c): Section mismatch in reference from the function integrator_clocksource_init() to the function .init.text:clocksource_mmio_init() The function integrator_clocksource_init() references the function __init clocksource_mmio_init(). This is often because integrator_clocksource_init lacks a __init annotation or the annotation of clocksource_mmio_init is wrong. Add the missing __init annotation that makes it build cleanly with all compilers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Thierry Reding <treding@nvidia.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/20170915194310.1170514-1-arnd@arndb.de
2017-09-18Merge tag 'drm-amdkfd-next-2017-09-02' of ↵Dave Airlie
git://people.freedesktop.org/~gabbayo/linux into drm-fixes some trivial amdkfd cleanups * tag 'drm-amdkfd-next-2017-09-02' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: pass queue's mqd when destroying mqd drm/amdkfd: remove memset before memcpy uapi linux/kfd_ioctl.h: only use __u32 and __u64
2017-09-17Update version of cifs moduleSteve French
Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2017-09-17cifs: hide unused functionsArnd Bergmann
The newly added SMB2+ attribute support causes unused function warnings when CONFIG_CIFS_XATTR is disabled: fs/cifs/smb2ops.c:563:1: error: 'smb2_set_ea' defined but not used [-Werror=unused-function] smb2_set_ea(const unsigned int xid, struct cifs_tcon *tcon, fs/cifs/smb2ops.c:513:1: error: 'smb2_query_eas' defined but not used [-Werror=unused-function] smb2_query_eas(const unsigned int xid, struct cifs_tcon *tcon, This adds another #ifdef around the affected functions. Fixes: 5517554e4313 ("cifs: Add support for writing attributes on SMB2+") Fixes: 95907fea4fd8 ("cifs: Add support for reading attributes on SMB2+") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Steve French <smfrench@gmail.com>
2017-09-17SMB3: Add support for multidialect negotiate (SMB2.1 and later)Steve French
With the need to discourage use of less secure dialect, SMB1 (CIFS), we temporarily upgraded the dialect to SMB3 in 4.13, but since there are various servers which only support SMB2.1 (2.1 is more secure than CIFS/SMB1) but not optimal for a default dialect - add support for multidialect negotiation. cifs.ko will now request SMB2.1 or later (ie SMB2.1 or SMB3.0, SMB3.02) and the server will pick the latest most secure one it can support. In addition since we are sending multidialect negotiate, add support for secure negotiate to validate that a man in the middle didn't downgrade us. Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> # 4.13+
2017-09-17arm64/syscalls: Move address limit check in loopThomas Garnier
A bug was reported on ARM where set_fs might be called after it was checked on the work pending function. ARM64 is not affected by this bug but has a similar construct. In order to avoid any similar problems in the future, the addr_limit_user_check function is moved at the beginning of the loop. Fixes: cf7de27ab351 ("arm64/syscalls: Check address limit on user-mode return") Reported-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Pratyush Anand <panand@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Will Drewry <wad@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: David Howells <dhowells@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-api@vger.kernel.org Cc: Yonghong Song <yhs@fb.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1504798247-48833-5-git-send-email-keescook@chromium.org
2017-09-17arm/syscalls: Optimize address limit checkThomas Garnier
Disable the generic address limit check in favor of an architecture specific optimized implementation. The generic implementation using pending work flags did not work well with ARM and alignment faults. The address limit is checked on each syscall return path to user-mode path as well as the irq user-mode return function. If the address limit was changed, a function is called to report data corruption (stopping the kernel or process based on configuration). The address limit check has to be done before any pending work because they can reset the address limit and the process is killed using a SIGKILL signal. For example the lkdtm address limit check does not work because the signal to kill the process will reset the user-mode address limit. Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Pratyush Anand <panand@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Will Drewry <wad@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: David Howells <dhowells@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-api@vger.kernel.org Cc: Yonghong Song <yhs@fb.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1504798247-48833-4-git-send-email-keescook@chromium.org
2017-09-17Revert "arm/syscalls: Check address limit on user-mode return"Thomas Garnier
This reverts commit 73ac5d6a2b6ac3ae8d1e1818f3e9946f97489bc9. The work pending loop can call set_fs after addr_limit_user_check removed the _TIF_FSCHECK flag. This may happen at anytime based on how ARM handles alignment exceptions. It leads to an infinite loop condition. After discussion, it has been agreed that the generic approach is not tailored to the ARM architecture and any fix might not be complete. This patch will be replaced by an architecture specific implementation. The work flag approach will be kept for other architectures. Reported-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Pratyush Anand <panand@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Will Drewry <wad@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: David Howells <dhowells@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-api@vger.kernel.org Cc: Yonghong Song <yhs@fb.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1504798247-48833-3-git-send-email-keescook@chromium.org
2017-09-17syscalls: Use CHECK_DATA_CORRUPTION for addr_limit_user_checkThomas Garnier
Use CHECK_DATA_CORRUPTION instead of BUG_ON to provide more flexibility on address limit failures. By default, send a SIGKILL signal to kill the current process preventing exploitation of a bad address limit. Make the TIF_FSCHECK flag optional so ARM can use this function. Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Pratyush Anand <panand@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Will Drewry <wad@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: David Howells <dhowells@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-api@vger.kernel.org Cc: Yonghong Song <yhs@fb.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1504798247-48833-2-git-send-email-keescook@chromium.org
2017-09-17x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUsAndy Lutomirski
For unknown historical reasons (i.e. Borislav doesn't recall), 32-bit kernels invoke cpu_init() on secondary CPUs with initial_page_table loaded into CR3. Then they set current->active_mm to &init_mm and call enter_lazy_tlb() before fixing CR3. This means that the x86 TLB code gets invoked while CR3 is inconsistent, and, with the improved PCID sanity checks I added, we warn. Fix it by loading swapper_pg_dir (i.e. init_mm.pgd) earlier. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 72c0098d92ce ("x86/mm: Reinitialize TLB state on hotplug and resume") Link: http://lkml.kernel.org/r/30cdfea504682ba3b9012e77717800a91c22097f.1505663533.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-17x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlierAndy Lutomirski
Otherwise we might have the PCID feature bit set during cpu_init(). This is just for robustness. I haven't seen any actual bugs here. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: cba4671af755 ("x86/mm: Disable PCID on 32-bit kernels") Link: http://lkml.kernel.org/r/b16dae9d6b0db5d9801ddbebbfd83384097c61f3.1505663533.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-17x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware codeAndy Lutomirski
Putting the logical ASID into CR3's PCID bits directly means that we have two cases to consider separately: ASID == 0 and ASID != 0. This means that bugs that only hit in one of these cases trigger nondeterministically. There were some bugs like this in the past, and I think there's still one in current kernels. In particular, we have a number of ASID-unware code paths that save CR3, write some special value, and then restore CR3. This includes suspend/resume, hibernate, kexec, EFI, and maybe other things I've missed. This is currently dangerous: if ASID != 0, then this code sequence will leave garbage in the TLB tagged for ASID 0. We could potentially see corruption when switching back to ASID 0. In principle, an initialize_tlbstate_and_flush() call after these sequences would solve the problem, but EFI, at least, does not call this. (And it probably shouldn't -- initialize_tlbstate_and_flush() is rather expensive.) Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/cdc14bbe5d3c3ef2a562be09a6368ffe9bd947a6.1505663533.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-17x86/mm: Factor out CR3-building codeAndy Lutomirski
Current, the code that assembles a value to load into CR3 is open-coded everywhere. Factor it out into helpers build_cr3() and build_cr3_noflush(). This makes one semantic change: __get_current_cr3_fast() was wrong on SME systems. No one noticed because the only caller is in the VMX code, and there are no CPUs with both SME and VMX. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <Thomas.Lendacky@amd.com> Link: http://lkml.kernel.org/r/ce350cf11e93e2842d14d0b95b0199c7d881f527.1505663533.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-17CIFS/SMB3: Update documentation to reflect SMB3 and various changesSteve French
Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2017-09-17dma-coherent: fix rmem_dma_device_init regressionArnd Bergmann
My recent bug fix introduced another bug, which caused rmem_dma_device_init to always fail, as rmem->priv is never set to anything. This restores the previous behavior, calling dma_init_coherent_memory() whenever ->priv is NULL. Fixes: d35b0996fef3 ("dma-coherent: fix dma_declare_coherent_memory() logic error") Reported-by: Roy Pledge <roy.pledge@nxp.com> Tested-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-09-17Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc fixes from Thomas Gleixner: - A fix for a user space regression in /proc/$PID/stat - A couple of objtool fixes: ~ Plug a memory leak ~ Avoid accessing empty sections which upsets certain binutil versions ~ Prevent corrupting the obj file when section sizes did not change * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fs/proc: Report eip/esp in /prod/PID/stat for coredumping objtool: Fix object file corruption objtool: Do not retrieve data from empty sections objtool: Fix memory leak in elf_create_rela_section()
2017-09-17Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "Fix for an off by one error in a cpumask result comparison" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix cpumask check in __irq_startup_managed()
2017-09-17Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single fix addressing the missing CP8 feature bit in CPUID for a range of AMD ZEN models/mask revisions" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/AMD: Fix erratum 1076 (CPB bit)
2017-09-16Linux 4.14-rc1v4.14-rc1Linus Torvalds
2017-09-16Merge tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI updates from Richard Weinberger: "Minor improvements" * tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs: UBI: Fix two typos in comments ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate" ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines
2017-09-16Merge branch 'for-linus-4.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - minor improvements - fixes for Debian's new gcc defaults (pie enabled by default) - fixes for XSTATE/XSAVE to make UML work again on modern systems * 'for-linus-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: return negative in tuntap_open_tramp() um: remove a stray tab um: Use relative modversions with LD_SCRIPT_DYN um: link vmlinux with -no-pie um: Fix CONFIG_GCOV for modules. Fix minor typos and grammar in UML start_up help um: defconfig: Cleanup from old Kconfig options um: Fix FP register size for XSTATE/XSAVE
2017-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger. 2) Fix double-free in rmnet driver, from Dan Carpenter. 3) INET connection socket layer can double put request sockets, fix from Eric Dumazet. 4) Don't match collect metadata-mode tunnels if the device is down, from Haishuang Yan. 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in be2net driver, from Suresh Reddy. 6) Fix scaling error in gen_estimator, from Eric Dumazet. 7) Fix 64-bit statistics deadlock in systemport driver, from Florian Fainelli. 8) Fix use-after-free in sctp_sock_dump, from Xin Long. 9) Reject invalid BPF_END instructions in verifier, from Edward Cree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) mlxsw: spectrum_router: Only handle IPv4 and IPv6 events Documentation: link in networking docs tcp: fix data delivery rate bpf/verifier: reject BPF_ALU64|BPF_END sctp: do not mark sk dumped when inet_sctp_diag_fill returns err sctp: fix an use-after-free issue in sctp_sock_dump netvsc: increase default receive buffer size tcp: update skb->skb_mstamp more carefully net: ipv4: fix l3slave check for index returned in IP_PKTINFO net: smsc911x: Quieten netif during suspend net: systemport: Fix 64-bit stats deadlock net: vrf: avoid gcc-4.6 warning qed: remove unnecessary call to memset tg3: clean up redundant initialization of tnapi tls: make tls_sw_free_resources static sctp: potential read out of bounds in sctp_ulpevent_type_enabled() MAINTAINERS: review Renesas DT bindings as well net_sched: gen_estimator: fix scaling error in bytes/packets samples nfp: wait for the NSP resource to appear on boot nfp: wait for board state before talking to the NSP ...
2017-09-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "A second round of updates for the input subsystem: - a new driver for PWM-controlled vibrators - ucb1400 touchscreen driver had completely busted suspend/resume handling - we now handle "home" button found on some devices with Goodix touchscreens - assorted other fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Gigabyte P57 to the keyboard reset table Input: xpad - validate USB endpoint type during probe Input: ucb1400_ts - fix suspend and resume handling Input: edt-ft5x06 - fix access to non-existing register Input: elantech - make arrays debounce_packet static, reduces object code size Input: surface3_spi - make const array header static, reduces object code size Input: goodix - add support for capacitive home button Input: add a driver for PWM controllable vibrators Input: adi - make array seq static, reduces object code size
2017-09-16genirq: Fix cpumask check in __irq_startup_managed()Thomas Gleixner
The result of cpumask_any_and() is invalid when result greater or equal nr_cpu_ids. The current check is checking for greater only. Fix it. Fixes: 761ea388e8c4 ("genirq: Handle managed irqs gracefully in irq_startup()") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Chen Yu <yu.c.chen@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: stable@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/20170913213152.272283444@linutronix.de
2017-09-16firmware: Restore support for built-in firmwareMarkus Trippelsdorf
Commit 5620a0d1aac ("firmware: delete in-kernel firmware") removed the entire firmware directory. Unfortunately it thereby also removed the support for built-in firmware. This restores the ability to build firmware directly into the kernel by pruning the original Makefile to the necessary minimum. The default for EXTRA_FIRMWARE_DIR is now the standard directory /lib/firmware/. Fixes: 5620a0d1aac ("firmware: delete in-kernel firmware") Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: Greg K-H <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-16mlxsw: spectrum_router: Only handle IPv4 and IPv6 eventsIdo Schimmel
The driver doesn't support events from address families other than IPv4 and IPv6, so ignore them. Otherwise, we risk queueing a work item before it's initialized. This can happen in case a VRF is configured when MROUTE_MULTIPLE_TABLES is enabled, as the VRF driver will try to add an l3mdev rule for the IPMR family. Fixes: 65e65ec137f4 ("mlxsw: spectrum_router: Don't ignore IPv6 notifications") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Andreas Rammhold <andreas@rammhold.de> Reported-by: Florian Klink <flokli@flokli.de> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-16Documentation: link in networking docsPavel Machek
Fix link in filter.txt. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-16tcp: fix data delivery rateEric Dumazet
Now skb->mstamp_skb is updated later, we also need to call tcp_rate_skb_sent() after the update is done. Fixes: 8c72c65b426b ("tcp: update skb->skb_mstamp more carefully") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 02:36:50 +0000