summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-09cifs: fix reference leak for tlinkRonnie Sahlberg
Don't leak a reference to tlink during the NOTIFY ioctl Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> CC: Stable <stable@vger.kernel.org> # v5.6+
2020-07-09hwmon: (adm1275) Make sure we are reading enough data for different chipsChu Lin
Issue: When PEC is enabled, binding adm1272 to the adm1275 would fail due to PEC error. See below: adm1275: probe of xxxx failed with error -74 Diagnosis: Per the datasheet of adm1272, adm1278, adm1293 and amd1294, PMON_CONFIG (0xd4) is 16bits wide. On the other hand, PMON_CONFIG (0xd4) for adm1275 is 8bits wide. The driver should not assume everything is 8bits wide and read only 8bits from it. Solution: If it is adm1272, adm1278, adm1293 and adm1294, use i2c_read_word. Else, use i2c_read_byte Testing: Binding adm1272 to the driver. The change is only tested on adm1272. Signed-off-by: Chu Lin <linchuyuan@google.com> Link: https://lore.kernel.org/r/20200709040612.3977094-1-linchuyuan@google.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-09arm64/alternatives: don't patch up internal branchesArd Biesheuvel
Commit f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences") moved the alternatives replacement sequences into subsections, in order to keep the as close as possible to the code that they replace. Unfortunately, this broke the logic in branch_insn_requires_update, which assumed that any branch into kernel executable code was a branch that required updating, which is no longer the case now that the code sequences that are patched in are in the same section as the patch site itself. So the only way to discriminate branches that require updating and ones that don't is to check whether the branch targets the replacement sequence itself, and so we can drop the call to kernel_text_address() entirely. Fixes: f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences") Reported-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Alexandru Elisei <alexandru.elisei@arm.com> Link: https://lore.kernel.org/r/20200709125953.30918-1-ardb@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-09s390/mm: fix huge pte soft dirty copyingJanosch Frank
If the pmd is soft dirty we must mark the pte as soft dirty (and not dirty). This fixes some cases for guest migration with huge page backings. Cc: <stable@vger.kernel.org> # 4.8 Fixes: bc29b7ac1d9f ("s390/mm: clean up pte/pmd encoding") Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-09timer: Prevent base->clk from moving backwardFrederic Weisbecker
When a timer is enqueued with a negative delta (ie: expiry is below base->clk), it gets added to the wheel as expiring now (base->clk). Yet the value that gets stored in base->next_expiry, while calling trigger_dyntick_cpu(), is the initial timer->expires value. The resulting state becomes: base->next_expiry < base->clk On the next timer enqueue, forward_timer_base() may accidentally rewind base->clk. As a possible outcome, timers may expire way too early, the worst case being that the highest wheel levels get spuriously processed again. To prevent from that, make sure that base->next_expiry doesn't get below base->clk. Fixes: a683f390b93f ("timers: Forward the wheel clock whenever possible") Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Tested-by: Juri Lelli <juri.lelli@redhat.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200703010657.2302-1-frederic@kernel.org
2020-07-09x86/entry/common: Make prepare_exit_to_usermode() staticThomas Gleixner
No users outside this file anymore. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20200708192934.301116609@linutronix.de
2020-07-09x86/entry: Mark check_user_regs() noinstrThomas Gleixner
It's called from the non-instrumentable section. Fixes: c9c26150e61d ("x86/entry: Assert that syscalls are on the right stack") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20200708192934.191497962@linutronix.de
2020-07-09x86/traps: Disable interrupts in exc_aligment_check()Thomas Gleixner
exc_alignment_check() fails to disable interrupts before returning to the entry code. Fixes: ca4c6a9858c2 ("x86/traps: Make interrupt enable/disable symmetric in C code") Reported-by: syzbot+0889df9502bc0f112b31@syzkaller.appspotmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20200708192934.076519438@linutronix.de
2020-07-09arm64: Add missing sentinel to erratum_1463225Florian Fainelli
When the erratum_1463225 array was introduced a sentinel at the end was missing thus causing a KASAN: global-out-of-bounds in is_affected_midr_range_list on arm64 error. Fixes: a9e821b89daa ("arm64: Add KRYO4XX gold CPU cores to erratum list 1463225 and 1418040") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Link: https://lore.kernel.org/linux-arm-kernel/CA+G9fYs3EavpU89-rTQfqQ9GgxAMgMAk7jiiVrfP0yxj5s+Q6g@mail.gmail.com/ Link: https://lore.kernel.org/r/20200709051345.14544-1-f.fainelli@gmail.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-09usb: gadget: function: fix missing spinlock in f_uac1_legacyZhang Qiang
Add a missing spinlock protection for play_queue, because the play_queue may be destroyed when the "playback_work" work func and "f_audio_out_ep_complete" callback func operate this paly_queue at the same time. Fixes: c6994e6f067cf ("USB: gadget: add USB Audio Gadget driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Zhang Qiang <qiang.zhang@windriver.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: gadget: udc: atmel: fix uninitialized read in debug printkMichał Mirosław
Fixed commit moved the assignment of 'req', but did not update a reference in the DBG() call. Use the argument as it was renamed. Fixes: 5fb694f96e7c ("usb: gadget: udc: atmel: fix possible oops when unloading module") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: gadget: udc: atmel: remove outdated comment in usba_ep_disable()Michał Mirosław
Fixed commit removed the offending behaviour from the driver, but missed the comment and associated test. Remove them now. Fixes: 38e58986e6fc ("usb: gadget: udc: atmel: don't disable enpdoints we don't own") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: dwc2: Fix shutdown callback in platformMinas Harutyunyan
To avoid lot of interrupts from dwc2 core, which can be asserted in specific conditions need to disable interrupts on HW level instead of disable IRQs on Kernel level, because of IRQ can be shared between drivers. Cc: stable@vger.kernel.org Fixes: a40a00318c7fc ("usb: dwc2: add shutdown callback to platform variant") Tested-by: Frank Mori Hess <fmh6jj@gmail.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Frank Mori Hess <fmh6jj@gmail.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: cdns3: trace: fix some endian issuesPeter Chen
It is found by sparse. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: cdns3: ep0: fix some endian issuesPeter Chen
It is found by sparse. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()Evgeny Novikov
gr_ep_init() does not assign the allocated request anywhere if allocation of memory for the buffer fails. This is a memory leak fixed by the given patch. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: gadget: fix langid kernel-doc warning in usbstring.cRandy Dunlap
Fix spelling of the 'langid' function argument in the kernel-doc notation to quieten a kernel-doc warning. ../drivers/usb/gadget/usbstring.c:77: warning: Function parameter or member 'langid' not described in 'usb_validate_langid' ../drivers/usb/gadget/usbstring.c:77: warning: Excess function parameter 'lang' description in 'usb_validate_langid' Fixes: 17309a6a4356 ("usb: gadget: add "usb_validate_langid" function") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Tao Ren <rentao.bupt@gmail.com> Cc: Tao Ren <rentao.bupt@gmail.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: dwc3: pci: add support for the Intel Jasper LakeHeikki Krogerus
This patch adds the necessary PCI ID for Intel Jasper Lake devices. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variantHeikki Krogerus
This patch adds the necessary PCI ID for TGP-H devices. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09drm/aspeed: Call drm_fbdev_generic_setup after drm_dev_registerGuenter Roeck
The following backtrace is seen when running aspeed G5 kernels. WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/drm_fb_helper.c:2233 drm_fbdev_generic_setup+0x138/0x198 aspeed_gfx 1e6e6000.display: Device has not been registered. CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3 #1 Hardware name: Generic DT based system Backtrace: [<8010d6d0>] (dump_backtrace) from [<8010d9b8>] (show_stack+0x20/0x24) r7:00000009 r6:60000153 r5:00000000 r4:8119fa94 [<8010d998>] (show_stack) from [<80b8cb98>] (dump_stack+0xcc/0xec) [<80b8cacc>] (dump_stack) from [<80123ef0>] (__warn+0xd8/0xfc) r7:00000009 r6:80e62ed0 r5:00000000 r4:974c3ccc [<80123e18>] (__warn) from [<80123f98>] (warn_slowpath_fmt+0x84/0xc4) r9:00000009 r8:806a0140 r7:000008b9 r6:80e62ed0 r5:80e631f8 r4:974c2000 [<80123f18>] (warn_slowpath_fmt) from [<806a0140>] (drm_fbdev_generic_setup+0x138/0x198) r9:00000001 r8:9758fc10 r7:9758fc00 r6:00000000 r5:00000020 r4:9768a000 [<806a0008>] (drm_fbdev_generic_setup) from [<806d4558>] (aspeed_gfx_probe+0x204/0x32c) r7:9758fc00 r6:00000000 r5:00000000 r4:9768a000 [<806d4354>] (aspeed_gfx_probe) from [<806dfca0>] (platform_drv_probe+0x58/0xa8) Since commit 1aed9509b29a6 ("drm/fb-helper: Remove return value from drm_fbdev_generic_setup()"), drm_fbdev_generic_setup() must be called after drm_dev_register() to avoid the warning. Do that. Fixes: 1aed9509b29a6 ("drm/fb-helper: Remove return value from drm_fbdev_generic_setup()") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200701001002.74997-1-linux@roeck-us.net
2020-07-08Input: elan_i2c - add more hardware ID for Lenovo laptopsDave Wang
This adds more hardware IDs for Elan touchpads found in various Lenovo laptops. Signed-off-by: Dave Wang <dave.wang@emc.com.tw> Link: https://lore.kernel.org/r/000201d5a8bd$9fead3f0$dfc07bd0$@emc.com.tw Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-08io_uring: fix memleak in __io_sqe_files_update()Yang Yingliang
I got a memleak report when doing some fuzz test: BUG: memory leak unreferenced object 0xffff888113e02300 (size 488): comm "syz-executor401", pid 356, jiffies 4294809529 (age 11.954s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ a0 a4 ce 19 81 88 ff ff 60 ce 09 0d 81 88 ff ff ........`....... backtrace: [<00000000129a84ec>] kmem_cache_zalloc include/linux/slab.h:659 [inline] [<00000000129a84ec>] __alloc_file+0x25/0x310 fs/file_table.c:101 [<000000003050ad84>] alloc_empty_file+0x4f/0x120 fs/file_table.c:151 [<000000004d0a41a3>] alloc_file+0x5e/0x550 fs/file_table.c:193 [<000000002cb242f0>] alloc_file_pseudo+0x16a/0x240 fs/file_table.c:233 [<00000000046a4baa>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<00000000046a4baa>] anon_inode_getfile+0xac/0x1c0 fs/anon_inodes.c:74 [<0000000035beb745>] __do_sys_perf_event_open+0xd4a/0x2680 kernel/events/core.c:11720 [<0000000049009dc7>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<00000000353731ca>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 BUG: memory leak unreferenced object 0xffff8881152dd5e0 (size 16): comm "syz-executor401", pid 356, jiffies 4294809529 (age 11.954s) hex dump (first 16 bytes): 01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000074caa794>] kmem_cache_zalloc include/linux/slab.h:659 [inline] [<0000000074caa794>] lsm_file_alloc security/security.c:567 [inline] [<0000000074caa794>] security_file_alloc+0x32/0x160 security/security.c:1440 [<00000000c6745ea3>] __alloc_file+0xba/0x310 fs/file_table.c:106 [<000000003050ad84>] alloc_empty_file+0x4f/0x120 fs/file_table.c:151 [<000000004d0a41a3>] alloc_file+0x5e/0x550 fs/file_table.c:193 [<000000002cb242f0>] alloc_file_pseudo+0x16a/0x240 fs/file_table.c:233 [<00000000046a4baa>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<00000000046a4baa>] anon_inode_getfile+0xac/0x1c0 fs/anon_inodes.c:74 [<0000000035beb745>] __do_sys_perf_event_open+0xd4a/0x2680 kernel/events/core.c:11720 [<0000000049009dc7>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<00000000353731ca>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 If io_sqe_file_register() failed, we need put the file that get by fget() to avoid the memleak. Fixes: c3a31e605620 ("io_uring: add support for IORING_REGISTER_FILES_UPDATE") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08io_uring: export cq overflow status to userspaceXiaoguang Wang
For those applications which are not willing to use io_uring_enter() to reap and handle cqes, they may completely rely on liburing's io_uring_peek_cqe(), but if cq ring has overflowed, currently because io_uring_peek_cqe() is not aware of this overflow, it won't enter kernel to flush cqes, below test program can reveal this bug: static void test_cq_overflow(struct io_uring *ring) { struct io_uring_cqe *cqe; struct io_uring_sqe *sqe; int issued = 0; int ret = 0; do { sqe = io_uring_get_sqe(ring); if (!sqe) { fprintf(stderr, "get sqe failed\n"); break;; } ret = io_uring_submit(ring); if (ret <= 0) { if (ret != -EBUSY) fprintf(stderr, "sqe submit failed: %d\n", ret); break; } issued++; } while (ret > 0); assert(ret == -EBUSY); printf("issued requests: %d\n", issued); while (issued) { ret = io_uring_peek_cqe(ring, &cqe); if (ret) { if (ret != -EAGAIN) { fprintf(stderr, "peek completion failed: %s\n", strerror(ret)); break; } printf("left requets: %d\n", issued); continue; } io_uring_cqe_seen(ring, cqe); issued--; printf("left requets: %d\n", issued); } } int main(int argc, char *argv[]) { int ret; struct io_uring ring; ret = io_uring_queue_init(16, &ring, 0); if (ret) { fprintf(stderr, "ring setup failed: %d\n", ret); return 1; } test_cq_overflow(&ring); return 0; } To fix this issue, export cq overflow status to userspace by adding new IORING_SQ_CQ_OVERFLOW flag, then helper functions() in liburing, such as io_uring_peek_cqe, can be aware of this cq overflow and do flush accordingly. Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08libnvdimm/security: Fix key lookup permissionsDan Williams
As of commit 8c0637e950d6 ("keys: Make the KEY_NEED_* perms an enum rather than a mask") lookup_user_key() needs an explicit declaration of what it wants to do with the key. Add KEY_NEED_SEARCH to fix a warning with the below signature, and fixes the inability to retrieve a key. WARNING: CPU: 15 PID: 6276 at security/keys/permission.c:35 key_task_permission+0xd3/0x140 [..] RIP: 0010:key_task_permission+0xd3/0x140 [..] Call Trace: lookup_user_key+0xeb/0x6b0 ? vsscanf+0x3df/0x840 ? key_validate+0x50/0x50 ? key_default_cmp+0x20/0x20 nvdimm_get_user_key_payload.part.0+0x21/0x110 [libnvdimm] nvdimm_security_store+0x67d/0xb20 [libnvdimm] security_store+0x67/0x1a0 [libnvdimm] kernfs_fop_write+0xcf/0x1c0 vfs_write+0xde/0x1d0 ksys_write+0x68/0xe0 do_syscall_64+0x5c/0xa0 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Fixes: 8c0637e950d6 ("keys: Make the KEY_NEED_* perms an enum rather than a mask") Suggested-by: David Howells <dhowells@redhat.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/159297332630.1304143.237026690015653759.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-07-08RDMA/mlx5: Set PD pointers for the error flow unwindLeon Romanovsky
ib_pd is accessed internally during destroy of the TIR/TIS, but PD can be not set yet. This leading to the following kernel panic. BUG: kernel NULL pointer dereference, address: 0000000000000074 PGD 8000000079eaa067 P4D 8000000079eaa067 PUD 7ae81067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 1 PID: 709 Comm: syz-executor.0 Not tainted 5.8.0-rc3 #41 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:destroy_raw_packet_qp_tis drivers/infiniband/hw/mlx5/qp.c:1189 [inline] RIP: 0010:destroy_raw_packet_qp drivers/infiniband/hw/mlx5/qp.c:1527 [inline] RIP: 0010:destroy_qp_common+0x2ca/0x4f0 drivers/infiniband/hw/mlx5/qp.c:2397 Code: 00 85 c0 74 2e e8 56 18 55 ff 48 8d b3 28 01 00 00 48 89 ef e8 d7 d3 ff ff 48 8b 43 08 8b b3 c0 01 00 00 48 8b bd a8 0a 00 00 <0f> b7 50 74 e8 0d 6a fe ff e8 28 18 55 ff 49 8d 55 50 4c 89 f1 48 RSP: 0018:ffffc900007bbac8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88807949e800 RCX: 0000000000000998 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88807c180140 RBP: ffff88807b50c000 R08: 000000000002d379 R09: ffffc900007bba00 R10: 0000000000000001 R11: 000000000002d358 R12: ffff888076f37000 R13: ffff88807949e9c8 R14: ffffc900007bbe08 R15: ffff888076f37000 FS: 00000000019bf940(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000074 CR3: 0000000076d68004 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5_ib_create_qp+0xf36/0xf90 drivers/infiniband/hw/mlx5/qp.c:3014 _ib_create_qp drivers/infiniband/core/core_priv.h:333 [inline] create_qp+0x57f/0xd20 drivers/infiniband/core/uverbs_cmd.c:1443 ib_uverbs_create_qp+0xcf/0x100 drivers/infiniband/core/uverbs_cmd.c:1564 ib_uverbs_write+0x5fa/0x780 drivers/infiniband/core/uverbs_main.c:664 __vfs_write+0x3f/0x90 fs/read_write.c:495 vfs_write+0xc7/0x1f0 fs/read_write.c:559 ksys_write+0x5e/0x110 fs/read_write.c:612 do_syscall_64+0x3e/0x70 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x466479 Code: Bad RIP value. RSP: 002b:00007ffd057b62b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000466479 RDX: 0000000000000070 RSI: 0000000020000240 RDI: 0000000000000003 RBP: 00000000019bf8fc R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000bf6 R14: 00000000004cb859 R15: 00000000006fefc0 Fixes: 6c41965d647a ("RDMA/mlx5: Don't access ib_qp fields in internal destroy QP path") Link: https://lore.kernel.org/r/20200707110612.882962-4-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-08IB/mlx5: Fix 50G per lane indicationAya Levin
Some released FW versions mistakenly don't set the capability that 50G per lane link-modes are supported for VFs (ptys_extended_ethernet capability bit). Use PTYS.ext_eth_proto_capability instead, as this indication is always accurate. If PTYS.ext_eth_proto_capability is valid (has a non-zero value) conclude that the HCA supports 50G per lane. Otherwise, conclude that the HCA doesn't support 50G per lane. Fixes: 08e8676f1607 ("IB/mlx5: Add support for 50Gbps per lane link modes") Link: https://lore.kernel.org/r/20200707110612.882962-3-leon@kernel.org Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-08selftests: kmod: Add module address visibility testKees Cook
Make sure we don't regress the CAP_SYSLOG behavior of the module address visibility via /proc/modules nor /sys/module/*/sections/*. Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-08bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()Kees Cook
When evaluating access control over kallsyms visibility, credentials at open() time need to be used, not the "current" creds (though in BPF's case, this has likely always been the same). Plumb access to associated file->f_cred down through bpf_dump_raw_ok() and its callers now that kallsysm_show_value() has been refactored to take struct cred. Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: bpf@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 7105e828c087 ("bpf: allow for correlation of maps and helpers in dump") Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-08kprobes: Do not expose probe addresses to non-CAP_SYSLOGKees Cook
The kprobe show() functions were using "current"'s creds instead of the file opener's creds for kallsyms visibility. Fix to use seq_file->file->f_cred. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: stable@vger.kernel.org Fixes: 81365a947de4 ("kprobes: Show address of kprobes if kallsyms does") Fixes: ffb9bd68ebdb ("kprobes: Show blacklist addresses as same as kallsyms does") Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-08module: Do not expose section addresses to non-CAP_SYSLOGKees Cook
The printing of section addresses in /sys/module/*/sections/* was not using the correct credentials to evaluate visibility. Before: # cat /sys/module/*/sections/.*text 0xffffffffc0458000 ... # capsh --drop=CAP_SYSLOG -- -c "cat /sys/module/*/sections/.*text" 0xffffffffc0458000 ... After: # cat /sys/module/*/sections/*.text 0xffffffffc0458000 ... # capsh --drop=CAP_SYSLOG -- -c "cat /sys/module/*/sections/.*text" 0x0000000000000000 ... Additionally replaces the existing (safe) /proc/modules check with file->f_cred for consistency. Reported-by: Dominik Czarnota <dominik.czarnota@trailofbits.com> Fixes: be71eda5383f ("module: Fix display of wrong module .text address") Cc: stable@vger.kernel.org Tested-by: Jessica Yu <jeyu@kernel.org> Acked-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-08module: Refactor section attr into bin attributeKees Cook
In order to gain access to the open file's f_cred for kallsym visibility permission checks, refactor the module section attributes to use the bin_attribute instead of attribute interface. Additionally removes the redundant "name" struct member. Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Jessica Yu <jeyu@kernel.org> Acked-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-08kallsyms: Refactor kallsyms_show_value() to take credKees Cook
In order to perform future tests against the cred saved during open(), switch kallsyms_show_value() to operate on a cred, and have all current callers pass current_cred(). This makes it very obvious where callers are checking the wrong credential in their "read" contexts. These will be fixed in the coming patches. Additionally switch return value to bool, since it is always used as a direct permission check, not a 0-on-success, negative-on-error style function return. Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-08cxgb4: fix all-mask IP address comparisonRahul Lakkireddy
Convert all-mask IP address to Big Endian, instead, for comparison. Fixes: f286dd8eaad5 ("cxgb4: use correct type for all-mask IP address comparison") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08tipc: fix retransmission on unicast linksHamish Martin
A scenario has been observed where a 'bc_init' message for a link is not retransmitted if it fails to be received by the peer. This leads to the peer never establishing the link fully and it discarding all other data received on the link. In this scenario the message is lost in transit to the peer. The issue is traced to the 'nxt_retr' field of the skb not being initialised for links that aren't a bc_sndlink. This leads to the comparison in tipc_link_advance_transmq() that gates whether to attempt retransmission of a message performing in an undesirable way. Depending on the relative value of 'jiffies', this comparison: time_before(jiffies, TIPC_SKB_CB(skb)->nxt_retr) may return true or false given that 'nxt_retr' remains at the uninitialised value of 0 for non bc_sndlinks. This is most noticeable shortly after boot when jiffies is initialised to a high value (to flush out rollover bugs) and we compare a jiffies of, say, 4294940189 to zero. In that case time_before returns 'true' leading to the skb not being retransmitted. The fix is to ensure that all skbs have a valid 'nxt_retr' time set for them and this is achieved by refactoring the setting of this value into a central function. With this fix, transmission losses of 'bc_init' messages do not stall the link establishment forever because the 'bc_init' message is retransmitted and the link eventually establishes correctly. Fixes: 382f598fb66b ("tipc: reduce duplicate packets for unicast traffic") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08l2tp: remove skb_dst_set() from l2tp_xmit_skb()Xin Long
In the tx path of l2tp, l2tp_xmit_skb() calls skb_dst_set() to set skb's dst. However, it will eventually call inet6_csk_xmit() or ip_queue_xmit() where skb's dst will be overwritten by: skb_dst_set_noref(skb, dst); without releasing the old dst in skb. Then it causes dst/dev refcnt leak: unregister_netdevice: waiting for eth0 to become free. Usage count = 1 This can be reproduced by simply running: # modprobe l2tp_eth && modprobe l2tp_ip # sh ./tools/testing/selftests/net/l2tp.sh So before going to inet6_csk_xmit() or ip_queue_xmit(), skb's dst should be dropped. This patch is to fix it by removing skb_dst_set() from l2tp_xmit_skb() and moving skb_dst_drop() into l2tp_xmit_core(). Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: James Chapman <jchapman@katalix.com> Tested-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08nbd: Fix memory leak in nbd_add_socketZheng Bin
When adding first socket to nbd, if nsock's allocation failed, the data structure member "config->socks" was reallocated, but the data structure member "config->num_connections" was not updated. A memory leak will occur then because the function "nbd_config_put" will free "config->socks" only when "config->num_connections" is not zero. Fixes: 03bf73c315ed ("nbd: prevent memory leak") Reported-by: syzbot+934037347002901b8d2a@syzkaller.appspotmail.com Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08arm64: Documentation: Fix broken table in generated HTMLSuzuki K Poulose
cpu-feature-registers.rst is missing a new line before a couple of tables listing the visible fields, causing broken tables in the HTML documentation generated by "make htmldocs". Fix this by adding the missing new line. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20200707143152.154541-1-suzuki.poulose@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: kgdb: Fix single-step exception handling oopsWei Li
After entering kdb due to breakpoint, when we execute 'ss' or 'go' (will delay installing breakpoints, do single-step first), it won't work correctly, and it will enter kdb due to oops. It's because the reason gotten in kdb_stub() is not as expected, and it seems that the ex_vector for single-step should be 0, like what arch powerpc/sh/parisc has implemented. Before the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0 [0]kdb> g / # echo h > /proc/sysrq-trigger Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 due to Breakpoint @ 0xffff8000101486cc [3]kdb> ss Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 Oops: (null) due to oops @ 0xffff800010082ab8 CPU: 3 PID: 266 Comm: sh Not tainted 5.7.0-rc4-13839-gf0e5ad491718 #6 Hardware name: linux,dummy-virt (DT) pstate: 00000085 (nzcv daIf -PAN -UAO) pc : el1_irq+0x78/0x180 lr : __handle_sysrq+0x80/0x190 sp : ffff800015003bf0 x29: ffff800015003d20 x28: ffff0000fa878040 x27: 0000000000000000 x26: ffff80001126b1f0 x25: ffff800011b6a0d8 x24: 0000000000000000 x23: 0000000080200005 x22: ffff8000101486cc x21: ffff800015003d30 x20: 0000ffffffffffff x19: ffff8000119f2000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800015003e50 x7 : 0000000000000002 x6 : 00000000380b9990 x5 : ffff8000106e99e8 x4 : ffff0000fadd83c0 x3 : 0000ffffffffffff x2 : ffff800011b6a0d8 x1 : ffff800011b6a000 x0 : ffff80001130c9d8 Call trace: el1_irq+0x78/0x180 printk+0x0/0x84 write_sysrq_trigger+0xb0/0x118 proc_reg_write+0xb4/0xe0 __vfs_write+0x18/0x40 vfs_write+0xb0/0x1b8 ksys_write+0x64/0xf0 __arm64_sys_write+0x14/0x20 el0_svc_common.constprop.2+0xb0/0x168 do_el0_svc+0x20/0x98 el0_sync_handler+0xec/0x1a8 el0_sync+0x140/0x180 [3]kdb> After the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0 [0]kdb> g / # echo h > /proc/sysrq-trigger Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> g Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> ss Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to SS trap @ 0xffff800010082ab8 [0]kdb> Fixes: 44679a4f142b ("arm64: KGDB: Add step debugging support") Signed-off-by: Wei Li <liwei391@huawei.com> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200509214159.19680-2-liwei391@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: entry: Tidy up block comments and label numbersWill Deacon
Continually butchering our entry code with CPU errata workarounds has led to it looking a little scruffy. Consistently used /* */ comment style for multi-line block comments and ensure that small numeric labels use consecutive integers. No functional change, but the state of things was irritating. Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: Rework ARM_ERRATUM_1414080 handlingMarc Zyngier
The current handling of erratum 1414080 has the side effect that cntkctl_el1 can get changed for both 32 and 64bit tasks. This isn't a problem so far, but if we ever need to mitigate another of these errata on the 64bit side, we'd better keep the messing with cntkctl_el1 local to 32bit tasks. For that, make sure that on entering the kernel from a 32bit tasks, userspace access to cntvct gets enabled, and disabled returning to userspace, while it never gets changed for 64bit tasks. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20200706163802.1836732-5-maz@kernel.org [will: removed branch instructions per Mark's review comments] Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: arch_timer: Disable the compat vdso for cores affected by ↵Marc Zyngier
ARM64_WORKAROUND_1418040 ARM64_WORKAROUND_1418040 requires that AArch32 EL0 accesses to the virtual counter register are trapped and emulated by the kernel. This makes the vdso pretty pointless, and in some cases livelock prone. Provide a workaround entry that limits the vdso to 64bit tasks. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200706163802.1836732-4-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: arch_timer: Allow an workaround descriptor to disable compat vdsoMarc Zyngier
As we are about to disable the vdso for compat tasks in some circumstances, let's allow a workaround descriptor to express exactly that. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200706163802.1836732-3-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: Introduce a way to disable the 32bit vdsoMarc Zyngier
We have a class of errata (grouped under the ARM64_WORKAROUND_1418040 banner) that force the trapping of counter access from 32bit EL0. We would normally disable the whole vdso for such defect, except that it would disable it for 64bit userspace as well, which is a shame. Instead, add a new vdso_clock_mode, which signals that the vdso isn't usable for compat tasks. This gets checked in the new vdso_clocksource_ok() helper, now provided for the 32bit vdso. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200706163802.1836732-2-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: entry: Fix the typo in the comment of el1_dbg()Kevin Hao
The function name should be local_daif_mask(). Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Mark Rutlamd <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20200417103212.45812-2-haokexin@gmail.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08drivers/firmware/psci: Assign @err directly in hotplug_tests()Gavin Shan
The return value of down_and_up_cpus() can be assigned to @err directly. With that, the useless assignment to @err with zero can be dropped. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20200630075943.203954-1-gshan@redhat.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08drivers/firmware/psci: Fix memory leakage in alloc_init_cpu_groups()Gavin Shan
The CPU mask (@tmp) should be released on failing to allocate @cpu_groups or any of its elements. Otherwise, it leads to memory leakage because the CPU mask variable is dynamically allocated when CONFIG_CPUMASK_OFFSTACK is enabled. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20200630075227.199624-1-gshan@redhat.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08KVM: arm64: Fix definition of PAGE_HYP_DEVICEWill Deacon
PAGE_HYP_DEVICE is intended to encode attribute bits for an EL2 stage-1 pte mapping a device. Unfortunately, it includes PROT_DEVICE_nGnRE which encodes attributes for EL1 stage-1 mappings such as UXN and nG, which are RES0 for EL2, and DBM which is meaningless as TCR_EL2.HD is not set. Fix the definition of PAGE_HYP_DEVICE so that it doesn't set RES0 bits at EL2. Acked-by: Marc Zyngier <maz@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200708162546.26176-1-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08Merge branch 'net-smc-fixes'David S. Miller
Karsten Graul says: ==================== net/smc: fixes 2020-07-08 Please apply the following patch series for smc to netdev's net tree. The patches fix problems found during more testing of SMC functionality, resulting in hang conditions and unneeded link deactivations. The clc module was hardened to be prepared for possible future SMCD versions. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net/smc: tolerate future SMCD versionsUrsula Braun
CLC proposal messages of future SMCD versions could be larger than SMCD V1 CLC proposal messages. To enable toleration in SMC V1 the receival of CLC proposal messages is adapted: * accept larger length values in CLC proposal * check trailing eye catcher for incoming CLC proposal with V1 length only * receive the whole CLC proposal even in cases it does not fit into the V1 buffer Fixes: e7b7a64a8493d ("smc: support variable CLC proposal messages") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net/smc: switch smcd_dev_list spinlock to mutexUrsula Braun
The similar smc_ib_devices spinlock has been converted to a mutex. Protecting the smcd_dev_list by a mutex is possible as well. This patch converts the smcd_dev_list spinlock to a mutex. Fixes: c6ba7c9ba43d ("net/smc: add base infrastructure for SMC-D and ISM") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 01:33:03 +0000