summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-07net: Added pointer check for dst->ops->neigh_lookup in dst_neigh_lookup_skbMartin Varghese
The packets from tunnel devices (eg bareudp) may have only metadata in the dst pointer of skb. Hence a pointer check of neigh_lookup is needed in dst_neigh_lookup_skb Kernel crashes when packets from bareudp device is processed in the kernel neighbour subsytem. [ 133.384484] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 133.385240] #PF: supervisor instruction fetch in kernel mode [ 133.385828] #PF: error_code(0x0010) - not-present page [ 133.386603] PGD 0 P4D 0 [ 133.386875] Oops: 0010 [#1] SMP PTI [ 133.387275] CPU: 0 PID: 5045 Comm: ping Tainted: G W 5.8.0-rc2+ #15 [ 133.388052] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 133.391076] RIP: 0010:0x0 [ 133.392401] Code: Bad RIP value. [ 133.394029] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246 [ 133.396656] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00 [ 133.399018] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400 [ 133.399685] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000 [ 133.400350] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400 [ 133.401010] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003 [ 133.401667] FS: 00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000 [ 133.402412] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.402948] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0 [ 133.403611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.404270] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.404933] Call Trace: [ 133.405169] <IRQ> [ 133.405367] __neigh_update+0x5a4/0x8f0 [ 133.405734] arp_process+0x294/0x820 [ 133.406076] ? __netif_receive_skb_core+0x866/0xe70 [ 133.406557] arp_rcv+0x129/0x1c0 [ 133.406882] __netif_receive_skb_one_core+0x95/0xb0 [ 133.407340] process_backlog+0xa7/0x150 [ 133.407705] net_rx_action+0x2af/0x420 [ 133.408457] __do_softirq+0xda/0x2a8 [ 133.408813] asm_call_on_stack+0x12/0x20 [ 133.409290] </IRQ> [ 133.409519] do_softirq_own_stack+0x39/0x50 [ 133.410036] do_softirq+0x50/0x60 [ 133.410401] __local_bh_enable_ip+0x50/0x60 [ 133.410871] ip_finish_output2+0x195/0x530 [ 133.411288] ip_output+0x72/0xf0 [ 133.411673] ? __ip_finish_output+0x1f0/0x1f0 [ 133.412122] ip_send_skb+0x15/0x40 [ 133.412471] raw_sendmsg+0x853/0xab0 [ 133.412855] ? insert_pfn+0xfe/0x270 [ 133.413827] ? vvar_fault+0xec/0x190 [ 133.414772] sock_sendmsg+0x57/0x80 [ 133.415685] __sys_sendto+0xdc/0x160 [ 133.416605] ? syscall_trace_enter+0x1d4/0x2b0 [ 133.417679] ? __audit_syscall_exit+0x1d9/0x280 [ 133.418753] ? __prepare_exit_to_usermode+0x5d/0x1a0 [ 133.419819] __x64_sys_sendto+0x24/0x30 [ 133.420848] do_syscall_64+0x4d/0x90 [ 133.421768] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 133.422833] RIP: 0033:0x7fe013689c03 [ 133.423749] Code: Bad RIP value. [ 133.424624] RSP: 002b:00007ffc7288f418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 133.425940] RAX: ffffffffffffffda RBX: 000056151fc63720 RCX: 00007fe013689c03 [ 133.427225] RDX: 0000000000000040 RSI: 000056151fc63720 RDI: 0000000000000003 [ 133.428481] RBP: 00007ffc72890b30 R08: 000056151fc60500 R09: 0000000000000010 [ 133.429757] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 [ 133.431041] R13: 000056151fc636e0 R14: 000056151fc616bc R15: 0000000000000080 [ 133.432481] Modules linked in: mpls_iptunnel act_mirred act_tunnel_key cls_flower sch_ingress veth mpls_router ip_tunnel bareudp ip6_udp_tunnel udp_tunnel macsec udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc xt_MASQUERADE iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc ebtable_filter ebtables overlay ip6table_filter ip6_tables iptable_filter sunrpc ext4 mbcache jbd2 pcspkr i2c_piix4 virtio_balloon joydev ip_tables xfs libcrc32c ata_generic qxl pata_acpi drm_ttm_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ata_piix libata virtio_net net_failover virtio_console failover virtio_blk i2c_core virtio_pci virtio_ring serio_raw floppy virtio dm_mirror dm_region_hash dm_log dm_mod [ 133.444045] CR2: 0000000000000000 [ 133.445082] ---[ end trace f4aeee1958fd1638 ]--- [ 133.446236] RIP: 0010:0x0 [ 133.447180] Code: Bad RIP value. [ 133.448152] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246 [ 133.449363] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00 [ 133.450835] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400 [ 133.452237] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000 [ 133.453722] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400 [ 133.455149] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003 [ 133.456520] FS: 00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000 [ 133.458046] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.459342] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0 [ 133.460782] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.462240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.463697] Kernel panic - not syncing: Fatal exception in interrupt [ 133.465226] Kernel Offset: 0xfa00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 133.467025] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: aaa0c23cb901 ("Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug") Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net/sched: act_ct: add miss tcf_lastuse_update.wenxu
When tcf_ct_act execute the tcf_lastuse_update should be update or the used stats never update filter protocol ip pref 3 flower chain 0 filter protocol ip pref 3 flower chain 0 handle 0x1 eth_type ipv4 dst_ip 1.1.1.1 ip_flags frag/firstfrag skip_hw not_in_hw action order 1: ct zone 1 nat pipe index 1 ref 1 bind 1 installed 103 sec used 103 sec Action statistics: Sent 151500 bytes 101 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 cookie 4519c04dc64a1a295787aab13b6a50fb Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net/mlx5e: Do not include rwlock.h directlySebastian Andrzej Siewior
rwlock.h should not be included directly. Instead linux/splinlock.h should be included. Including it directly will break the RT build. Fixes: 549c243e4e010 ("net/mlx5e: Extract neigh-specific code from en_rep.c to rep/neigh.c") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07mptcp: fix DSS map generation on fin retransmissionPaolo Abeni
The RFC 8684 mandates that no-data DATA FIN packets should carry a DSS with 0 sequence number and data len equal to 1. Currently, on FIN retransmission we re-use the existing mapping; if the previous fin transmission was part of a partially acked data packet, we could end-up writing in the egress packet a non-compliant DSS. The above will be detected by a "Bad mapping" warning on the receiver side. This change addresses the issue explicitly checking for 0 len packet when adding the DATA_FIN option. Fixes: 6d0060f600ad ("mptcp: Write MPTCP DSS headers to outgoing data packets") Reported-by: syzbot+42a07faa5923cfaeb9c9@syzkaller.appspotmail.com Tested-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07ipv4: fill fl4_icmp_{type,code} in ping_v4_sendmsgSabrina Dubroca
IPv4 ping sockets don't set fl4.fl4_icmp_{type,code}, which leads to incomplete IPsec ACQUIRE messages being sent to userspace. Currently, both raw sockets and IPv6 ping sockets set those fields. Expected output of "ip xfrm monitor": acquire proto esp sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 8 code 0 dev ens4 policy src 10.0.2.15/32 dst 8.8.8.8/32 <snip> Currently with ping sockets: acquire proto esp sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 0 code 0 dev ens4 policy src 10.0.2.15/32 dst 8.8.8.8/32 <snip> The Libreswan test suite found this problem after Fedora changed the value for the sysctl net.ipv4.ping_group_range. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by: Paul Wouters <pwouters@redhat.com> Tested-by: Paul Wouters <pwouters@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: ethernet: fec: prevent tx starvation under high rx loadTobias Waldekranz
In the ISR, we poll the event register for the queues in need of service and then enter polled mode. After this point, the event register will never be read again until we exit polled mode. In a scenario where a UDP flow is routed back out through the same interface, i.e. "router-on-a-stick" we'll typically only see an rx queue event initially. Once we start to process the incoming flow we'll be locked polled mode, but we'll never clean the tx rings since that event is never caught. Eventually the netdev watchdog will trip, causing all buffers to be dropped and then the process starts over again. Rework the NAPI poll to keep trying to consome the entire budget as long as new events are coming in, making sure to service all rx/tx queues, in priority order, on each pass. Fixes: 4d494cdc92b3 ("net: fec: change data structure to support multiqueue") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Fugang Duan <fugang.duan@nxp.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: sky2: initialize return of gm_phy_readTom Rix
clang static analysis flags this garbage return drivers/net/ethernet/marvell/sky2.c:208:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return v; ^~~~~~~~ static inline u16 gm_phy_read( ... { u16 v; __gm_phy_read(hw, port, reg, &v); return v; } __gm_phy_read can return without setting v. So handle similar to skge.c's gm_phy_read, initialize v. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07Merge tag 'mtd/fixes-for-5.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "MTD: - Set a missing master partition panic write flag Raw NAND: - Fix build issue in the xway driver - Fix a wrong return code" * tag 'mtd/fixes-for-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: xway: Fix build issue mtd: set master partition panic write flag nandsim: Fix return code testing of ns_find_operation()
2020-07-07gfs2: Rework read and page fault lockingAndreas Gruenbacher
So far, gfs2 has taken the inode glocks inside the ->readpage and ->readahead address space operations. Since commit d4388340ae0b ("fs: convert mpage_readpages to mpage_readahead"), gfs2_readahead is passed the pages to read ahead locked. With that, the current holder of the inode glock may be trying to lock one of those pages while gfs2_readahead is trying to take the inode glock, resulting in a deadlock. Fix that by moving the lock taking to the higher-level ->read_iter file and ->fault vm operations. This also gets rid of an ugly lock inversion workaround in gfs2_readpage. The cache consistency model of filesystems like gfs2 is such that if data is found in the page cache, the data is up to date and can be used without taking any filesystem locks. If a page is not cached, filesystem locks must be taken before populating the page cache. To avoid taking the inode glock when the data is already cached, gfs2_file_read_iter first tries to read the data with the IOCB_NOIO flag set. If that fails, the inode glock is taken and the operation is retried with the IOCB_NOIO flag cleared. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-07-07fs: Add IOCB_NOIO flag for generic_file_read_iterAndreas Gruenbacher
Add an IOCB_NOIO flag that indicates to generic_file_read_iter that it shouldn't trigger any filesystem I/O for the actual request or for readahead. This allows to do tentative reads out of the page cache as some filesystems allow, and to take the appropriate locks and retry the reads only if the requested pages are not cached. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-07-07Merge tag 'for-5.8-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - regression fix of a leak in global block reserve accounting - fix a (hard to hit) race of readahead vs releasepage that could lead to crash - convert all remaining uses of comment fall through annotations to the pseudo keyword - fix crash when mounting a fuzzed image with -o recovery * tag 'for-5.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: reset tree root pointer after error in init_tree_roots btrfs: fix reclaim_size counter leak after stealing from global reserve btrfs: fix fatal extent_buffer readahead vs releasepage race btrfs: convert comments to fallthrough annotations
2020-07-07Merge tag 'arc-5.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - User build systems to pass -mcpu - Fix potential EFA clobber in syscall handler - Fix ARCompact 2 levels of interrupts build - Detect newer HS CPU releases - misc other fixes * tag 'arc-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARCv2: support loop buffer (LPB) disabling ARC: build: remove deprecated toggle for arc700 builds ARC: build: allow users to specify -mcpu ARCv2: boot log: detect newer/upconing HS3x/HS4x releases ARC: elf: use right ELF_ARCH ARC: [arcompact] fix bitrot with 2 levels of interrupt ARC: entry: fix potential EFA clobber when TIF_SYSCALL_TRACE
2020-07-07cgroup: fix cgroup_sk_alloc() for sk_clone_lock()Cong Wang
When we clone a socket in sk_clone_lock(), its sk_cgrp_data is copied, so the cgroup refcnt must be taken too. And, unlike the sk_alloc() path, sock_update_netprioidx() is not called here. Therefore, it is safe and necessary to grab the cgroup refcnt even when cgroup_sk_alloc is disabled. sk_clone_lock() is in BH context anyway, the in_interrupt() would terminate this function if called there. And for sk_alloc() skcd->val is always zero. So it's safe to factor out the code to make it more readable. The global variable 'cgroup_sk_alloc_disabled' is used to determine whether to take these reference counts. It is impossible to make the reference counting correct unless we save this bit of information in skcd->val. So, add a new bit there to record whether the socket has already taken the reference counts. This obviously relies on kmalloc() to align cgroup pointers to at least 4 bytes, ARCH_KMALLOC_MINALIGN is certainly larger than that. This bug seems to be introduced since the beginning, commit d979a39d7242 ("cgroup: duplicate cgroup reference when cloning sockets") tried to fix it but not compeletely. It seems not easy to trigger until the recent commit 090e28b229af ("netprio_cgroup: Fix unlimited memory leak of v2 cgroups") was merged. Fixes: bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup") Reported-by: Cameron Berkenpas <cam@neo-zeon.de> Reported-by: Peter Geis <pgwipeout@gmail.com> Reported-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com> Reported-by: Daniël Sonck <dsonck92@gmail.com> Reported-by: Zhang Qiang <qiang.zhang@windriver.com> Tested-by: Cameron Berkenpas <cam@neo-zeon.de> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Zefan Li <lizefan@huawei.com> Cc: Tejun Heo <tj@kernel.org> Cc: Roman Gushchin <guro@fb.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07Merge tag 'tpmdd-next-v5.8-rc5' of git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds
Pull tpm fix from Jarkko Sakkinen: "Revert commit e918e570415c ("tpm_tis: Remove the HID IFX0102"). Removing IFX0102 from tpm_tis was not a right move because both tpm_tis and tpm_infineon use the same device ID. A real fix requires quirks added to both drivers. It can probably wait until v5.9 as the bug has existed since 2006" * tag 'tpmdd-next-v5.8-rc5' of git://git.infradead.org/users/jjs/linux-tpmdd: Revert commit e918e570415c ("tpm_tis: Remove the HID IFX0102")
2020-07-07ipv6: Fix use of anycast address with loopbackDavid Ahern
Thomas reported a regression with IPv6 and anycast using the following reproducer: echo 1 > /proc/sys/net/ipv6/conf/all/forwarding ip -6 a add fc12::1/16 dev lo sleep 2 echo "pinging lo" ping6 -c 2 fc12:: The conversion of addrconf_f6i_alloc to use ip6_route_info_create missed the use of fib6_is_reject which checks addresses added to the loopback interface and sets the REJECT flag as needed. Update fib6_is_reject for loopback checks to handle RTF_ANYCAST addresses. Fixes: c7a1ce397ada ("ipv6: Change addrconf_f6i_alloc to use ip6_route_info_create") Reported-by: thomas.gambier@nexedi.com Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: usb: qmi_wwan: add support for Quectel EG95 LTE modemAceLan Kao
Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0195 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07Merge branch 'net-ipa-fix-warning-reported-errors'David S. Miller
Alex Elder says: ==================== net: ipa: fix warning-reported errors Building the kernel with W=1 produces numerous warnings for the IPA code. Some of those warnings turn out to flag real problems, and this series fixes them. The first patch fixes the most important ones, but the second and third are problems I think are worth treating as bugs as well. Note: I'll happily combine any of these if someone prefers that. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: ipa: include declarations in "ipa_gsi.c"Alex Elder
Include "ipa_gsi.h" in "ipa_gsi.c", so the public functions are defined before they are used in "ipa_gsi.c". This addresses some warnings that are reported with a "W=1" build. Fixes: c3f398b141a8 ("soc: qcom: ipa: IPA interface to GSI") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: ipa: declare struct types in "ipa_gsi.h"Alex Elder
Pointers to two struct types are used in "ipa_gsi.h", without those struct types being forward-declared. Add these declarations. Fixes: c3f398b141a8 ("soc: qcom: ipa: IPA interface to GSI") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: ipa: fix QMI structure definition bugsAlex Elder
Building with "W=1" did exactly what it was supposed to do, namely point out some suspicious-looking code to be verified not to contain bugs. Some QMI message structures defined in "ipa_qmi_msg.c" contained some bad field names (duplicating the "elem_size" field instead of defining the "offset" field), almost certainly due to copy/paste errors that weren't obvious in a scan of the code. Fix these bugs. Fixes: 530f9216a953 ("soc: qcom: ipa: AP/modem communications") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07mtd: rawnand: xway: Fix build issueMiquel Raynal
This MIPS driver does not support COMPILE_TEST yet and failed to build under my radar. Replace 'mtd' chich is not defined in the scope of xway_nand_remove() by nand_to_mtd(chip). The mistake has been added in the long series dropping nand_release(). Tested with a 7.3.0 MIPS GCC toolchain built with Buildroot. Fixes: 9fdd78f7bcda ("mtd: rawnand: xway: Stop using nand_release()") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200626065511.16424-1-miquel.raynal@bootlin.com
2020-07-07Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux listDavid Pedersen
This fixes two finger trackpad scroll on the Lenovo XiaoXin Air 12. Without nomux, the trackpad behaves as if only one finger is present and moves the cursor when trying to scroll. Signed-off-by: David Pedersen <limero1337@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200625133754.291325-1-limero1337@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-07usb: chipidea: core: add wakeup support for extconPeter Chen
If wakeup event occurred by extcon event, it needs to call ci_irq again since the first ci_irq calling at extcon notifier only wakes up controller, but do noop for event handling, it causes the extcon use case can't work well from low power mode. Cc: <stable@vger.kernel.org> Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Reported-by: Philippe Schenker <philippe.schenker@toradex.com> Tested-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200707060601.31907-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-07dm: do not use waitqueue for request-based DMMing Lei
Given request-based DM now uses blk-mq's blk_mq_queue_inflight() to determine if outstanding IO has completed (and DM has no control over the blk-mq state machine used to track outstanding IO) it is unsafe to wakeup waiter (dm_wait_for_completion) before blk-mq has cleared a request's state bits (e.g. MQ_RQ_IN_FLIGHT or MQ_RQ_COMPLETE). As such dm_wait_for_completion() could be left to wait indefinitely if no other requests complete. Fix this by eliminating request-based DM's use of waitqueue to wait for blk-mq requests to complete in dm_wait_for_completion. Signed-off-by: Ming Lei <ming.lei@redhat.com> Depends-on: 3c94d83cb3526 ("blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-07USB: serial: option: add Quectel EG95 LTE modemAceLan Kao
Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0195 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-07blk-mq: consider non-idle request as "inflight" in blk_mq_rq_inflight()Ming Lei
dm-multipath is the only user of blk_mq_queue_inflight(). When dm-multipath calls blk_mq_queue_inflight() to check if it has outstanding IO it can get a false negative. The reason for this is blk_mq_rq_inflight() doesn't consider requests that are no longer MQ_RQ_IN_FLIGHT but that are now MQ_RQ_COMPLETE (->complete isn't called or finished yet) as "inflight". This causes request-based dm-multipath's dm_wait_for_completion() to return before all outstanding dm-multipath requests have actually completed. This breaks DM multipath's suspend functionality because blk-mq requests complete after DM's suspend has finished -- which shouldn't happen. Fix this by considering any request not in the MQ_RQ_IDLE state (so either MQ_RQ_COMPLETE or MQ_RQ_IN_FLIGHT) as "inflight" in blk_mq_rq_inflight(). Fixes: 3c94d83cb3526 ("blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-07hwmon: (emc2103) fix unable to change fan pwm1_enable attributeVishwas M
This patch fixes a bug which does not let FAN mode to be changed from sysfs(pwm1_enable). i.e pwm1_enable can not be set to 3, it will always remain at 0. This is caused because the device driver handles the result of "read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg)" incorrectly. The driver thinks an error has occurred if the (result != 0). This has been fixed by changing the condition to (result < 0). Signed-off-by: Vishwas M <vishwas.reddy.vr@gmail.com> Link: https://lore.kernel.org/r/20200707142747.118414-1-vishwas.reddy.vr@gmail.com Fixes: 9df7305b5a86 ("hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller") Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-07hwmon: (amd_energy) match for supported modelsNaveen Krishna Chatradhi
The energy counters of certain models seems to be reporting inconsistent values. Hence, match for the supported models. Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com> Fixes: 8abee9566b7e ("hwmon: Add amd_energy driver to report energy counters") Link: https://lore.kernel.org/r/20200706171715.124993-1-nchatrad@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-07btrfs: discard: add missing put when grabbing block group from unused listQu Wenruo
[BUG] The following small test script can trigger ASSERT() at unmount time: mkfs.btrfs -f $dev mount $dev $mnt mount -o remount,discard=async $mnt umount $mnt The call trace: assertion failed: atomic_read(&block_group->count) == 1, in fs/btrfs/block-group.c:3431 ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.h:3204! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 10389 Comm: umount Tainted: G O 5.8.0-rc3-custom+ #68 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: btrfs_free_block_groups.cold+0x22/0x55 [btrfs] close_ctree+0x2cb/0x323 [btrfs] btrfs_put_super+0x15/0x17 [btrfs] generic_shutdown_super+0x72/0x110 kill_anon_super+0x18/0x30 btrfs_kill_super+0x17/0x30 [btrfs] deactivate_locked_super+0x3b/0xa0 deactivate_super+0x40/0x50 cleanup_mnt+0x135/0x190 __cleanup_mnt+0x12/0x20 task_work_run+0x64/0xb0 __prepare_exit_to_usermode+0x1bc/0x1c0 __syscall_return_slowpath+0x47/0x230 do_syscall_64+0x64/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The code: ASSERT(atomic_read(&block_group->count) == 1); btrfs_put_block_group(block_group); [CAUSE] Obviously it's some btrfs_get_block_group() call doesn't get its put call. The offending btrfs_get_block_group() happens here: void btrfs_mark_bg_unused(struct btrfs_block_group *bg) { if (list_empty(&bg->bg_list)) { btrfs_get_block_group(bg); list_add_tail(&bg->bg_list, &fs_info->unused_bgs); } } So every call sites removing the block group from unused_bgs list should reduce the ref count of that block group. However for async discard, it didn't follow the call convention: void btrfs_discard_punt_unused_bgs_list(struct btrfs_fs_info *fs_info) { list_for_each_entry_safe(block_group, next, &fs_info->unused_bgs, bg_list) { list_del_init(&block_group->bg_list); btrfs_discard_queue_work(&fs_info->discard_ctl, block_group); } } And in btrfs_discard_queue_work(), it doesn't call btrfs_put_block_group() either. [FIX] Fix the problem by reducing the reference count when we grab the block group from unused_bgs list. Reported-by: Marcos Paulo de Souza <mpdesouza@suse.com> Fixes: 6e80d4f8c422 ("btrfs: handle empty block_group removal for async discard") CC: stable@vger.kernel.org # 5.6+ Tested-by: Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-07HID: logitech-hidpp: avoid repeated "multiplier = " log messagesMaciej S. Szmigiero
These messages appear each time the mouse wakes from sleep, in my case (Logitech M705), every minute or so. Let's downgrade them to the "debug" level so they don't fill the kernel log by default. While we are at it, let's make clear that this is a wheel multiplier (and not, for example, XY movement multiplier). Fixes: 4435ff2f09a2 ("HID: logitech: Enable high-resolution scrolling on Logitech mice") Cc: stable@vger.kernel.org Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Harry Cutts <hcutts@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-07-07HID: logitech: Use HIDPP_RECEIVER_INDEX instead of 0xffMazin Rezk
Some parts of hid-logitech-dj explicitly referred to 0xff for the receiver index. This patch changes those references to the HIDPP_RECEIVER_INDEX definition. Signed-off-by: Mazin Rezk <mnrzk@protonmail.com> Reviewed-by: Filipe Laíns <lains@archlinux.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-07-07ALSA: compress: fix partial_drain completion stateVinod Koul
On partial_drain completion we should be in SNDRV_PCM_STATE_RUNNING state, so set that for partially draining streams in snd_compr_drain_notify() and use a flag for partially draining streams While at it, add locks for stream state change in snd_compr_drain_notify() as well. Fixes: f44f2a5417b2 ("ALSA: compress: fix drain calls blocking other compress functions (v6)") Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200629134737.105993-4-vkoul@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-07ALSA: usb-audio: Add implicit feedback quirk for RTX6001Pavel Hofman
USB Audio analyzer RTX6001 uses the same implicit feedback quirk as other XMOS-based devices. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Tested-by: Pavel Hofman <pavel.hofman@ivitera.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/822f0f20-1886-6884-a6b2-d11c685cbafa@ivitera.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-07ALSA: usb-audio: add quirk for MacroSilicon MS2109Hector Martin
These devices claim to be 96kHz mono, but actually are 48kHz stereo with swapped channels and unaligned transfers. Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20200702071433.237843-1-marcan@marcan.st Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-07ALSA: hda/realtek: Enable headset mic of Acer Veriton N4660G with ALC269VCJian-Hong Pan
The Acer Veriton N4660G desktop's audio (1025:1248) with ALC269VC cannot detect the headset microphone until ALC269VC_FIXUP_ACER_MIC_NO_PRESENCE quirk maps the NID 0x18 as the headset mic pin. Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200706071826.39726-3-jian-hong@endlessm.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-07ALSA: hda/realtek: Enable headset mic of Acer C20-820 with ALC269VCJian-Hong Pan
The Acer Aspire C20-820 AIO's audio (1025:1065) with ALC269VC can't detect the headset microphone until ALC269VC_FIXUP_ACER_HEADSET_MIC quirk maps the NID 0x18 as the headset mic pin. Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Daniel Drake <drake@endlessm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200706071826.39726-2-jian-hong@endlessm.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-07ALSA: hda/realtek - Enable audio jacks of Acer vCopperbox with ALC269VCJian-Hong Pan
The Acer desktop vCopperbox with ALC269VC cannot detect the MIC of headset, the line out and internal speaker until ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS quirk applied. Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Chris Chiu <chiu@endlessm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200706071826.39726-1-jian-hong@endlessm.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-07ALSA: hda/realtek - Fix Lenovo Thinkpad X1 Carbon 7th quirk subdevice idBenjamin Poirier
1) In snd_hda_pick_fixup(), quirks are first matched by PCI SSID and then, if there is no match, by codec SSID. The Lenovo "ThinkPad X1 Carbon 7th" has an audio chip with PCI SSID 0x2292 and codec SSID 0x2293[1]. Therefore, fix the quirk meant for that device to match on .subdevice == 0x2292. 2) The "Thinkpad X1 Yoga 7th" does not exist. The companion product to the Carbon 7th is the Yoga 4th. That device has an audio chip with PCI SSID 0x2292 and codec SSID 0x2292[2]. Given the behavior of snd_hda_pick_fixup(), it is not possible to have a separate quirk for the Yoga based on SSID. Therefore, merge the quirks meant for the Carbon and Yoga. This preserves the current behavior for the Yoga. [1] This is the case on my own machine and can also be checked here https://github.com/linuxhw/LsPCI/tree/master/Notebook/Lenovo/ThinkPad https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3225701 [2] https://github.com/linuxhw/LsPCI/tree/master/Convertible/Lenovo/ThinkPad https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3176355 Fixes: d2cd795c4ece ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen") Fixes: 54a6a7dc107d ("ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen") Cc: Jaroslav Kysela <perex@perex.cz> Cc: Kailang Yang <kailang@realtek.com> Tested-by: Vincent Bernat <vincent@bernat.ch> Tested-by: Even Brenden <evenbrenden@gmail.com> Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200703080005.8942-2-benjamin.poirier@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-07ALSA: hda/hdmi: improve debug traces for stream lookupsKai Vehmanen
The HDMI codec driver has two debug traces printed from different functions but with identical message content: "HDMI: hinfo 000000006a6b84d9 not registered" Fix this duplication and also add a bit more context in addition to raw object pointer, to help analysis of kernel logs. Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-2-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-07ALSA: hda/hdmi: fix failures at PCM open on Intel ICL and laterKai Vehmanen
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: https://github.com/thesofproject/linux/issues/1978 BugLink: https://github.com/thesofproject/linux/issues/2216 BugLink: https://github.com/thesofproject/linux/issues/2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-07ALSA: opl3: fix infoleak in opl3xidongwang
The stack object “info” in snd_opl3_ioctl() has a leaking problem. It has 2 padding bytes which are not initialized and leaked via “copy_to_user”. Signed-off-by: xidongwang <wangxidong_97@163.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1594006058-30362-1-git-send-email-wangxidong_97@163.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-07-07Revert commit e918e570415c ("tpm_tis: Remove the HID IFX0102")Jarkko Sakkinen
Removing IFX0102 from tpm_tis was not a right move because both tpm_tis and tpm_infineon use the same device ID. Revert the commit and add a remark about a bug caused by commit 93e1b7d42e1e ("[PATCH] tpm: add HID module parameter"). Fixes: e918e570415c ("tpm_tis: Remove the HID IFX0102") Reported-by: Peter Huewe <peterhuewe@gmx.de> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-07-06Revert "Input: elants_i2c - report resolution information for touch major"Dmitry Torokhov
This reverts commit 061706716384f1633d3d5090b22a99f33f1fcf2f - it turns out that the resolution of 1 unit per mm was not correct for a number of touch screens, causing touch sizes to be reported as way too large. See https://crbug.com/1085648 Reported-by: Harry Cutts <hcutts@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-06Input: elan_i2c - only increment wakeup count on touchDerek Basehore
This moves the wakeup increment for elan devices to the touch report. This prevents the drivers from incorrectly reporting a wakeup when the resume callback resets then device, which causes an interrupt to occur. Signed-off-by: Derek Basehore <dbasehore@chromium.org> Link: https://lore.kernel.org/r/20200706235046.1984283-1-dbasehore@chromium.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-06Input: synaptics - enable InterTouch for ThinkPad X1E 1st genIlya Katsnelson
Tested on my own laptop, touchpad feels slightly more responsive with this on, though it might just be placebo. Signed-off-by: Ilya Katsnelson <me@0upti.me> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://lore.kernel.org/r/20200703143457.132373-1-me@0upti.me Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-06drm/i915: Also drop vm.ref along error paths for vma constructionChris Wilson
Not only do we need to release the vm.ref we acquired for the vma on the duplicate insert branch, but also for the normal error paths, so roll them all into one. Reported-by: Andi Shyti <andi.shyti@intel.com> Suggested-by: Andi Shyti <andi.shyti@intel.com> Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702211015.29604-1-chris@chris-wilson.co.uk (cherry picked from commit 03fca66b7a36b52da8915341eee388267f6d5b73) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-07-06drm/i915: Drop vm.ref for duplicate vma on constructionChris Wilson
As we allow for parallel threads to create the same vma instance concurrently, and we only filter out the duplicates upon reacquiring the spinlock for the rbtree, we have to free the loser of the constructors' race. When freeing, we should also drop any resource references acquired for the redundant vma. Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702083225.20044-1-chris@chris-wilson.co.uk (cherry picked from commit 2377427cdd2b7514eb4c40241cf5c4dec63c1bec) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-07-06drm/i915/fbc: Fix fence_y_offset handlingVille Syrjälä
The current fence_y_offset calculation is broken. I think it more or less used to do the right thing, but then I changed the plane code to put the final x/y source offsets back into the src rectangle so now it's just subtraacting the same value from itself. The code would never have worked if we allowed the framebuffer to have a non-zero offset. Let's do this in a better way by just calculating the fence_y_offset from the final plane surface offset. Note that we don't align the plane surface address to fence rows so with horizontal panning there's often a horizontal offset from the fence start to the surface address as well. We have no way to tell the hardware about that so we just ignore it. Based on some quick tests the invlidation still happens correctly. I presume due to the invalidation nuking at least the full line (or a segment of multiple lines). Fixes: 54d4d719fa11 ("drm/i915: Overcome display engine stride limits via GTT remapping") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-4-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper <matthew.d.roper@intel.com> (cherry picked from commit 5331889b5ffb11d6257953e418291a9f04c02bed) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-07-06drm/i915: Skip stale object handle for debugfs per-file-statsChris Wilson
As we close a handle GEM object, we update the drm_file's idr with an error^W NULL pointer to indicate the in-progress closure, and finally removing it. If we read the idr directly, we may then see an invalid object pointer, and in our debugfs per_file_stats() we therefore need to protect against the entry being invalid. [ 1016.651637] RIP: 0010:per_file_stats+0xe/0x16e [ 1016.651646] Code: d2 41 0f b6 8e 69 8c 00 00 48 89 df 48 c7 c6 7b 74 8c be 31 c0 e8 0c 89 cf ff eb d2 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 53 <8b> 06 85 c0 0f 84 4d 01 00 00 49 89 d6 48 89 f3 3d ff ff ff 7f 73 [ 1016.651651] RSP: 0018:ffffad3a01337ba0 EFLAGS: 00010293 [ 1016.651656] RAX: 0000000000000018 RBX: ffff96fe040d65e0 RCX: 0000000000000002 [ 1016.651660] RDX: ffffad3a01337c50 RSI: 0000000000000000 RDI: 00000000000001e8 [ 1016.651663] RBP: ffffad3a01337bb8 R08: 0000000000000000 R09: 00000000000001c0 [ 1016.651667] R10: 0000000000000000 R11: ffffffffbdbe5fce R12: 0000000000000000 [ 1016.651671] R13: ffffffffbdbe5fce R14: ffffad3a01337c50 R15: 0000000000000001 [ 1016.651676] FS: 00007a597e2d7480(0000) GS:ffff96ff3bb00000(0000) knlGS:0000000000000000 [ 1016.651680] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1016.651683] CR2: 0000000000000000 CR3: 0000000171fc2001 CR4: 00000000003606e0 [ 1016.651687] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1016.651690] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1016.651693] Call Trace: [ 1016.651693] Call Trace: [ 1016.651703] idr_for_each+0x8a/0xe8 [ 1016.651711] i915_gem_object_info+0x2a3/0x3eb [ 1016.651720] seq_read+0x162/0x3ca [ 1016.651727] full_proxy_read+0x5b/0x8d [ 1016.651733] __vfs_read+0x45/0x1bb [ 1016.651741] vfs_read+0xc9/0x15e [ 1016.651746] ksys_read+0x7e/0xde [ 1016.651752] do_syscall_64+0x54/0x68 [ 1016.651758] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: a8c15954d64a ("drm/i915: Protect debugfs per_file_stats with RCU lock") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630152724.3734-1-chris@chris-wilson.co.uk (cherry picked from commit c1b9fd3d310177b31621d5e661f06885869cae12) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-07-06kselftest: ksft_test_num return type should be unsignedPaolo Bonzini
Fixes a compiler warning: In file included from sync_test.c:37: ../kselftest.h: In function ‘ksft_print_cnts’: ../kselftest.h:78:16: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare] if (ksft_plan != ksft_test_num()) ^~ Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-11 14:46:15 +0000