summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-11-14drm/i915/skl: Structure/enum definitions for SKL clocksSatheeshakrishna M
Adding structure/enum for SKL clocking implementation. v2: Addressed Damien's comment - Removed internal structure from this header file v3: Stove this into the generic intel_dpll_id enum and give them the established DPLL_ID_ prefixes. (Daniel) v4: - We'll only try to share DPLL1/2/3, leaving DPLL0 to eDP - Use SKL in the skylake shared DPLL names - Re-add the skl_dpll enum (Damien) v5: Remove SKL_DPLL_NONE (Daniel) v6: Modified as per review comments from Paulo Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v2) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> (v4,v5) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v3) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915/skl: Register definitions for SKL ClocksSatheeshakrishna M
This patch defines the necessary SKL registers for implementing the new clocking mechanism. v2: Addressed review comments by Damien - Added code comment - Introduced enum for WRPLL values v3: Rebase on top of nightly (minor conflict in i915_reg.h) v4: Use 0x, not 0X (Ville) v5: Modified as per review comments from Paulo Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v2) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> (v3,v4) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: preserve SSC if previously set v3Jesse Barnes
Some machines may have a broken VBT or no VBT at all, but we still want to use SSC there. So check for it and keep it enabled if we see it already on. Based on an earlier fix from Kristian. v2: honor modparam if set too (Daniel) read out at init time and store for panel_use_ssc() use (Jesse) v3: trust BIOS configuration over VBT like we do for DP (Jani) Reported-by: Kristian Høgsberg <hoegsberg@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: Delete outdated comment in byt_pte_encodeDaniel Vetter
This has been invalidated in commit 24f3a8cf7766e52a087904b4346794c7b410f957 Author: Akash Goel <akash.goel@intel.com> Date: Tue Jun 17 10:59:42 2014 +0530 drm/i915: Added write-enable pte bit supportt But despite that it's in the diff context no one noticed :( Cc: Akash Goel <akash.goel@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-11-14drm/i915: unify remaining register save/restore code a bitJani Nikula
Use the same conditions, group by features, add comments. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: don't save/restore backlight hist ctl registersJani Nikula
This is not used within the driver, and merely saving/restoring these registers isn't going to do any good anyway. In fact, it's possible it's actively harmful. Any code enabling the feature should handle this completely in the regular platform specific enable/disable backlight functions. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: don't save/restore panel fitter registersJani Nikula
AFAICT i9xx_pfit_disable() on the GMCH display crtc disable path in i9xx_crtc_disable() will always disable the panel fitter by writing 0 to PFIT_CONTROL. The register save will always save/restore 0. Also we completely recompue both in intel_gmch_panel_fitting so there's no way we depend upon leftover bits. Move the PFIT_CONTROL and PFIT_PGM_RATIOS save/restore to UMS code. While at it, save/restore them both under the same conditions. Signed-off-by: Jani Nikula <jani.nikula@intel.com> [danvet: Make it a bit clearer that we nowhere depend upon these bits.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: remove the unnecessary block around display.hpd_irq_setupJani Nikula
The block was added for spin_lock_irqsave flags, but since the locking was converted to spin_lock_irq variant, the block is no longer needed. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: restore RSTDBYCTL only on non-KMS pathsJani Nikula
Since RSTDBYCTL is only saved on non-KMS path in within i915_save_state, move the restore in i915_restore_state for symmetry. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915/vlv: don't save panel power sequencer registers on suspendJani Nikula
Don't save the panel power sequencer register on vlv/chv for two simple reasons. First, these are the wrong registers to save to begin with. Second, they are not restored anyway. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: Wait thread status on gen8+ fw sequenceMika Kuoppala
As per latest pm guide, we need to do this also on past hsw. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: Initialize workarounds in logical ring mode tooMichel Thierry
Following the legacy ring submission example, update the ring->init_context() hook to support the execlist submission mode. v2: update to use the new workaround macros and cleanup unused code. This takes care of both bdw and chv workarounds. v2.1: Add missing call to init_context() during deferred context creation. v3: Split init_context (emit) in legacy/lrc modes. For lrc, get the ringbuf from the context (Mika/Daniel). v4: Merge init_context interfaces back, the legacy mode only needs the ring, but the lrc mode needs the ring and context (Mika). Issue: VIZ-4092 Issue: GMIN-3475 Change-Id: Ie3d093b2542ab0e2a44b90460533e2f979788d6c Cc: Deepak S <deepak.s@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> [danvet: Align function paramater lists properly.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: Read the CCK fuse register from CCKVille Syrjälä
When reading a CCK register we should obviously read it from CCK not Punit. This problem has been present ever since this of code was introduced in commit 67c3bf6f55a97a0915a0f9ea07278a3073cc9601 Author: Deepak S <deepak.s@linux.intel.com> Date: Thu Jul 10 13:16:24 2014 +0530 drm/i915: populate mem_freq/cz_clock for chv The problem was raised during review by Mika [1] but somehow slipped through the cracks, and the patch got applied with the problem unfixed. [1] http://lists.freedesktop.org/archives/intel-gfx/2014-July/048937.html Cc: Deepak S <deepak.s@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: Add the predicate source registers to the register whitelistNeil Roberts
The predicate source registers are needed to implement conditional rendering without stalling. The two source registers are used to load the previous values of the PS_DEPTH_COUNT register saved from PIPE_CONTROL commands. These can then be compared and used to set the predicate enable bit via the MI_PREDICATE command. The command parser version number is increased to 2 to make it easier to detect the new functionality in user space. Signed-off-by: Neil Roberts <neil@linux.intel.com> Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com> (v1) Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: update pipe size at set_config timeJesse Barnes
This only affects the fastboot path as-is. In that case, we simply need to make sure that we update the pipe size at the first mode set. Rather than putting it off until we decide to flip (if indeed we do end up flipping), update the pipe size as appropriate a bit earlier in the set_config call. This sets us up for better pipe tracking in later patches. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: check for audio and infoframe changes across mode sets v2Jesse Barnes
If these change (e.g. after a modeset following a fastboot), we need to do a full mode set. v2: - put under pipe_config check so we don't deref a null state (Jesse) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915/hdmi: fetch infoframe status in get_config v2Jesse Barnes
This is useful for checking things later. v2: - fix hsw infoframe enabled check (Ander) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> [danvet: Add the missing PIPE_CONF_CHECK_I(has_infoframe); line to the hw state cross-checker.] [danet: Squash in fixup from Jesse to correctly compute has_infoframe in the hdmi compute_config function.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: use compute_config in set_config v4Jesse Barnes
This will allow us to consult more info before deciding whether to flip or do a full mode set. v2: - don't use uninitialized or incorrect pipe masks in set_config failure path (Ander) v3: - fixup for pipe_config changes in compute_config (Jesse) v4: - drop spurious hunk in force restore path (Ander) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: factor out compute_config from __intel_set_mode v3Jesse Barnes
This allows us to calculate the full pipe config before we do any mode setting work. v2: - clarify comments about global vs. per-crtc mode set (Ander) - clean up unnecessary pipe_config = NULL setting (Ander) v3: - fix pipe_config handling (alloc in compute_config, free in set_mode) (Jesse) - fix arg order in set_mode (Jesse) - fix failure path of set_config (Ander) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: Remove most INVALID_PIPE checks from the backlight codeVille Syrjälä
Now that the backlight device no longer gets registered too early we should be able to drop most of the INVALID_PIPE checks from the backlight code. The only exceptio is the opregion stuff where we may (in theory at least) get a request from the BIOS already during driver init as soon as the backlight setup has been done. In which case we can still get the INVALID_PIPE from intel_get_pipe_from_connector(). So leave that check in place, and add a comment explaining why. For the rest, if we still manage to get here with INVALID_PIPE on VLV/CHV we will now get a WARN from the lower level functions and can then actually investigate further. v2: Leave the check in the BIOS related code (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: Register the backlight device after the modeset initVille Syrjälä
Currently we register the backlight device as soon as we register the connector. That means we can get backlight requests from userspace already before reading out the current modeset hardware state. That means we don't yet know the current crtc->encoder->connector mapping, which causes problems for VLV/CHV which need to know the current pipe in order to figure out which BLC registers to poke. Currently we just ignore such requests fairly deep in the backlight code which means the backlight device brightness property will get out of sync with our backlight.level and the actual hardware state. Fix the problem by delaying the backlight device registration until the entire modeset init has been performed. And we also move the backlight unregisteration to happen as the first thing during the modeset cleanup so that we also won't be bothered with userspace backlight requested during teardown. This is a real world problem on machines using systemd, because systemd, for some reason, wants to restore the backlight to the level it used last time. And that happens as soon as it sees the backlight device appearing in the system. Sometimes the userspace access makes it through before the modeset init, sometimes not. v2: Do not lie to the user in the debug prints (Jani) Include connector name in the prints (Jani) Fix a typo in the commit message (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: Pass the current pipe from eDP init to backlight setupVille Syrjälä
On VLV/CHV both pipes A and B have their own backlight control registers. In order to correctly read out the current hardware state at init we need to know which pipe is driving the eDP port. Pass that information down from the eDP init code into the backlight code. To determine the correct pipe we first look at which pipe is currently configured in the port control register, if that look invalid we look at which pipe's PPS is currently controlling the port, and if that too looks invalid we just assume pipe A. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: Don't deref NULL crtc in intel_get_pipe_from_connector()Ville Syrjälä
If the connector would have an encoder but the encoder didn't have a crtc we might dereference a NULL crtc here. I suppose that should never happen due to intel_sanitize_encoder(), but let's be a bit paranoid print a warning if we ever hit this and return INVALID_PIPE to the caller. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: Skip .get_backlight() when backlight isn't enabledVille Syrjälä
On VLV/CHV when the display is off, we can't read out the current backlight level from the hardware since we have no pipe to do so. Currently we end up reading a bigus register due to passing INVALID_PIPE to VLV_BLC_PWM_CTL(). Skip the entire .get_backlight() call if the backlight isn't enabled according to backlight.enabled. This problem can be reproduced simply by reading the backlight device actual_brightness file while the display is off. Cc: Jani Nikula <jani.nikula@intel.com> Suggested-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: Warn if trying to poke a VLV backlight on invalid pipeVille Syrjälä
VLV/CHV have backlight controls only on pipes A and B. Bail out without touching registers that don't exist, and print a warning. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: Make the physical object coherent with GTTChris Wilson
Currently objects for which the hardware needs a contiguous physical address are allocated a shadow backing storage to satisfy the contraint. This shadow buffer is not wired into the normal obj->pages and so the physical object is incoherent with accesses via the GPU, GTT and CPU. By setting up the appropriate scatter-gather table, we can allow userspace to access the physical object via either a GTT mmaping of or by rendering into the GEM bo. However, keeping the CPU mmap of the shmemfs backing storage coherent with the contiguous shadow is not yet possible. Fortuituously, CPU mmaps of objects requiring physical addresses are not expected to be coherent anyway. This allows the physical constraint of the GEM object to be transparent to userspace and allow it to efficiently render into or update them via the GTT and GPU. v2: Fix leak of pci handle spotted by Ville v3: Remove the now duplicate call to detach_phys_object during free. v4: Wait for rendering before pwrite. As this patch makes it possible to render into the phys object, we should make it correct as well! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: WARN if we receive any gen9 rps interruptsImre Deak
Paulo noticed that we don't support RPS on GEN9 yet, so WARN for and ignore any RPS interrupts on that platform. Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: move rps irq enable/disable to i915_irq.cImre Deak
The logical place for these functions is in i915_irq.c next to the rest of PM interrupt handling functions. No functional change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: unify gen6/gen8 rps irq enable/disableImre Deak
The GEN6 and GEN8 versions differ only in the PM IIR and IER register addresses and that on GEN8 we need to keep the GEN8_PMINTR_REDIRECT_TO_NON_DISP PM interrupt unmasked. Abstract away these 3 things in the GEN6 versions of the helpers and use them everywhere. No functional change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: unify gen6/gen8 rps irq handlerImre Deak
After the previous patch the GEN8 RPS handler became very similar to the GEN6 version, so unify the two functions. No functional change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Move one misplaced hunk from a later patch to fix a bisect issue as reported by Wu Fengguang's 0-day builder and fix suggested by Imre.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: unify gen6/gen8 pm irq helpersImre Deak
The helpers to enable/disable PM IRQs for GEN6 and GEN8 are the same except for the PM interrupt mask register, so abstract away this register in the GEN6 versions and use these everywhere. No functional change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915/chv: Add new workarounds for chvArun Siluvery
+WaForceEnableNonCoherent:chv +WaHdcDisableFetchWhenMasked:chv For: VIZ-4090 Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915/chv: Combine GEN8_ROW_CHICKEN w/aArun Siluvery
WaDisablePartialInstShootdown:chv and WaDisableThreadStallDopClockGating:chv are related to the same register so combine them. Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915/chv: Remove pre-production workaroundsArun Siluvery
-WaDisableDopClockGating:chv -WaDisableSamplerPowerBypass:chv -WaDisableGunitClockGating:chv -WaDisableFfDopClockGating:chv -WaDisableDopClockGating:chv v2: Remove pre-production WA instead of restricting them based on revision id (Ville) For: VIZ-4090 Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: use the correct obj when preparing the sprite planePaulo Zanoni
Commit "drm/i915: create a prepare phase for sprite plane updates" changed the old_obj pointer we use when committing sprite planes, which caused a WARN() and a BUG() to be triggered. Later, commit "drm/i915: use intel_fb_obj() macros to assign gem objects" introduced the same problem to function intel_commit_sprite_plane(). Regression introduced by: commit ec82cb793c9224e0692eed904f43490cf70e8258 Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Date: Fri Oct 24 14:51:32 2014 +0100 drm/i915: create a prepare phase for sprite plane updates and: commit 77cde95217484e845743818691df026cec2534f4 Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Date: Fri Oct 24 14:51:33 2014 +0100 drm/i915: use intel_fb_obj() macros to assign gem objects Credits to Imre Deak for pointing out the exact lines that were wrong. v2: Also fix intel_commit_sprite_plane() (Ville) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85634 Testcase: igt/pm_rpm/legacy-planes Testcase: igt/pm_rpm/legacy-planes-dpms Testcase: igt/pm_rpm/universal-planes Testcase: igt/pm_rpm/universal-planes-dpms Credits-to: Imre Deak <imre.deak@intel.com> Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: Add tracepoints to track a vm during its lifetimeDaniele Ceraolo Spurio
- ppgtt init/release: these tracepoints are useful for observing the creation and destruction of Full PPGTTs. - ctx create/free: we can use the ctx_free trace in combination with the ppgtt_release one to be sure that the ppgtt doesn't stay alive for too long after the ctx is destroyed. ctx_create is there for simmetry - switch_mm: important point in the lifetime of the vm v4: add DOC information v5: pull the DOC in drm.tmpl v6: clean ppgtt init/release traces + add ctx create/free and switch_mm tracepoints (Chris) v7: drop execlist_submit_context tracepoint Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/edid: fix Baseline_ELD_Len field in drm_edid_to_eld()Jani Nikula
The Baseline_ELD_Len field does not include ELD Header Block size. From High Definition Audio Specification, Revision 1.0a: The header block is a fixed size of 4 bytes. The baseline block is variable size in multiple of 4 bytes, and its size is defined in the header block Baseline_ELD_Len field (in number of DWords). Do not include the header size in Baseline_ELD_Len field. Fix all known users of eld[2]. While at it, switch to DIV_ROUND_UP instead of open coding it. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Dave Airlie <airlied@linux.ie> [danvet: Fix compile fail in nouveau.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: avoid deadlock on failure paths in __intel_framebuffer_create()Alexey Khoroshilov
Since a8bb6818270c __intel_framebuffer_create() is called with struct_mutex held, so it should use drm_gem_object_unreference() instead of drm_gem_object_unreference_unlocked(). Found by Linux Driver Verification project (linuxtesting.org). This regression has been introduced in commit a8bb6818270c32126dba0fd2ddb139d885c5687d Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Feb 10 18:00:39 2014 +0100 drm/i915: Fix error path leak in fbdev fb allocation Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-14drm/i915: Use correct pipe config to update pll dividers. V2Bob Paauwe
Use the new pipe config values to calculate the updated pll dividers. This regression was introduced in commit 0dbdf89f27b17ae1eceed6782c2917f74cbb5d59 Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Date: Wed Oct 29 11:32:33 2014 +0200 drm/i915: Add infrastructure for choosing DPLLs before disabling crtcs and commit 00d958817dd3daaa452c221387ddaf23d1e4c06f Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Date: Wed Oct 29 11:32:36 2014 +0200 drm/i915: Covert remaining platforms to choose DPLLS before disabling CRTCs v2: Use intel_pipe_will_have_type() to look at new configuration - Ander Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com> CC: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Tested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-11-13Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio bugfix from Michael S Tsirkin: "This fixes a crash in virtio console multi-channel mode that got introduced in -rc1" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_console: move early VQ enablement
2014-11-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) sunhme driver lacks DMA mapping error checks, based upon a report by Meelis Roos. 2) Fix memory leak in mvpp2 driver, from Sudip Mukherjee. 3) DMA memory allocation sizes are wrong in systemport ethernet driver, fix from Florian Fainelli. 4) Fix use after free in mac80211 defragmentation code, from Johannes Berg. 5) Some networking uapi headers missing from Kbuild file, from Stephen Hemminger. 6) TUN driver gets csum_start offset wrong when VLAN accel is enabled, and macvtap has a similar bug, from Herbert Xu. 7) Adjust several tunneling drivers to set dev->iflink after registry, because registry sets that to -1 overwriting whatever we did. From Steffen Klassert. 8) Geneve forgets to set inner tunneling type, causing GSO segmentation to fail on some NICs. From Jesse Gross. 9) Fix several locking bugs in stmmac driver, from Fabrice Gasnier and Giuseppe CAVALLARO. 10) Fix spurious timeouts with NewReno on low traffic connections, from Marcelo Leitner. 11) Fix descriptor updates in enic driver, from Govindarajulu Varadarajan. 12) PPP calls bpf_prog_create() with locks held, which isn't kosher. Fix from Takashi Iwai. 13) Fix NULL deref in SCTP with malformed INIT packets, from Daniel Borkmann. 14) psock_fanout selftest accesses past the end of the mmap ring, fix from Shuah Khan. 15) Fix PTP timestamping for VLAN packets, from Richard Cochran. 16) netlink_unbind() calls in netlink pass wrong initial argument, from Hiroaki SHIMODA. 17) vxlan socket reuse accidently reuses a socket when the address family is different, so we have to explicitly check this, from Marcelo Lietner. 18) Fix missing include in nft_reject_bridge.c breaking the build on ppc and other architectures, from Guenter Roeck. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits) vxlan: Do not reuse sockets for a different address family smsc911x: power-up phydev before doing a software reset. lib: rhashtable - Remove weird non-ASCII characters from comments net/smsc911x: Fix delays in the PHY enable/disable routines net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down mode netlink: Properly unbind in error conditions. net: ptp: fix time stamp matching logic for VLAN packets. cxgb4 : dcb open-lldp interop fixes selftests/net: psock_fanout seg faults in sock_fanout_read_ring() net: bcmgenet: apply MII configuration in bcmgenet_open() net: bcmgenet: connect and disconnect from the PHY state machine net: qualcomm: Fix dependency ixgbe: phy: fix uninitialized status in ixgbe_setup_phy_link_tnx net: phy: Correctly handle MII ioctl which changes autonegotiation. ipv6: fix IPV6_PKTINFO with v4 mapped net: sctp: fix memory leak in auth key management net: sctp: fix NULL pointer dereference in af->from_addr_param on malformed packet net: ppp: Don't call bpf_prog_create() in ppp_lock net/mlx4_en: Advertize encapsulation offloads features only when VXLAN tunnel is set cxgb4 : Fix bug in DCB app deletion ...
2014-11-13Input: elantech - update the documentationUlrik De Bie
A chapter is added to describe the trackpoint packets. A section is added to describe the behaviour of the knob crc_enabled in sysfs. The introduction of the documentation only mentioned v1/v2, but in the last part it already contains explanation of v3 and v4. The introduction is updated. Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-13Input: elantech - provide a sysfs knob for crc_enabledUlrik De Bie
The detection of crc_enabled is known to fail for Fujitsu H730. A DMI blacklist is added for that, but it can be expected that other laptops will pop up with this. Here a sysfs knob is provided to alter the behaviour of crc_enabled. Writing 0 or 1 to it sets the variable to 0 or 1. Reading it will show the crc_enabled variable (0 or 1). Reported-by: Stefan Valouch <stefan@valouch.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-13Input: elantech - report the middle button of the touchpadUlrik De Bie
In the past, no elantech was known with 3 touchpad mouse buttons. Fujitsu H730 is the first known elantech with a middle button. This commit enables this middle button. For backwards compatibility, the Fujitsu is detected via DMI, and only for this one 3 buttons will be announced. Reported-by: Stefan Valouch <stefan@valouch.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-13Input: alps - ignore bad data on Dell Latitudes E6440 and E7440Pali Rohár
Sometimes on Dell Latitude laptops psmouse/alps driver receive invalid ALPS protocol V3 packets with bit7 set in last byte. More often it can be reproduced on Dell Latitude E6440 or E7440 with closed lid and pushing cover above touchpad. If bit7 in last packet byte is set then it is not valid ALPS packet. I was told that ALPS devices never send these packets. It is not know yet who send those packets, it could be Dell EC, bug in BIOS and also bug in touchpad firmware... With this patch alps driver does not process those invalid packets, but instead of reporting PSMOUSE_BAD_DATA, getting into out of sync state, getting back in sync with the next byte and spam dmesg we return PSMOUSE_FULL_PACKET. If driver is truly out of sync we'll fail the checks on the next byte and report PSMOUSE_BAD_DATA then. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-13Merge branch 'akpm' (fixes from Andrew Morton)Linus Torvalds
Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MAINTAINERS: add IIO include files kernel/panic.c: update comments for print_tainted mem-hotplug: reset node present pages when hot-adding a new pgdat mem-hotplug: reset node managed pages when hot-adding a new pgdat mm/debug-pagealloc: correct freepage accounting and order resetting fanotify: fix notification of groups with inode & mount marks mm, compaction: prevent infinite loop in compact_zone mm: alloc_contig_range: demote pages busy message from warn to info mm/slab: fix unalignment problem on Malta with EVA due to slab merge mm/page_alloc: restrict max order of merging on isolated pageblock mm/page_alloc: move freepage counting logic to __free_one_page() mm/page_alloc: add freepage on isolate pageblock to correct buddy list mm/page_alloc: fix incorrect isolation behavior by rechecking migratetype mm/compaction: skip the range until proper target pageblock is met zram: avoid kunmap_atomic() of a NULL pointer
2014-11-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "There is an overflow bug fix for cephfs from Zheng, a fix for handling large authentication ticket buffers in libceph from Ilya, and a few fixes for the request handling code from Ilya that affect RBD volumes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: change from BUG to WARN for __remove_osd() asserts libceph: clear r_req_lru_item in __unregister_linger_request() libceph: unlink from o_linger_requests when clearing r_osd libceph: do not crash on large auth tickets ceph: fix flush tid comparision
2014-11-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fix for an oops in HID core upon repeated subdriver insertion/removal under certain circumstances, by Benjamin Tissoires - quirk for another Elan Touchscreen device, by Adel Gadllah * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: core: cleanup .claimed field on disconnect HID: usbhid: enable always-poll quirk for Elan Touchscreen 0103
2014-11-13MAINTAINERS: add IIO include filesDaniel Baluta
Files under include/linux/iio were not reported as part of the IIO subsystem. Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Reported-by: Cristina Ciocan <cristina.ciocan@intel.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-13kernel/panic.c: update comments for print_taintedXie XiuQi
Commit 69361eef9056 ("panic: add TAINT_SOFTLOCKUP") added the 'L' flag, but failed to update the comments for print_tainted(). So, update the comments. Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-16 11:53:23 +0000