| Age | Commit message (Collapse) | Author |
|---|
|
Use string_is_terminated() helper instead of cpecific memchr() call.
This shows better the intention of the call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230208133153.22528-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use string_is_terminated() helper instead of cpecific memchr() call.
This shows better the intention of the call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230208133153.22528-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move string_is_valid() to the header for wider use.
While at it, rename to string_is_terminated() to be
precise about its semantics.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230208133153.22528-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for cable diagnostics in lan8841 PHY. It has the same
registers layout as lan8814 PHY, therefore reuse the functionality.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230208114406.1666671-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simon Horman says:
====================
nfp: fix schedule in atomic context when offloading sa
Yinjun Zhang says:
IPsec offloading callbacks may be called in atomic context, sleep is
not allowed in the implementation. Now use workqueue mechanism to
avoid this issue.
Extend existing workqueue mechanism for multicast configuration only
to universal use, so that all configuring through mailbox asynchoronously
can utilize it.
Also fix another two incorrect use of mailbox in IPsec:
1. Need lock for race condition when accessing mbox
2. Offset of mbox access should depends on tlv caps
====================
Link: https://lore.kernel.org/r/20230208102258.29639-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IPsec offloading callbacks may be called in atomic context, sleep is
not allowed in the implementation. Now use workqueue mechanism to
avoid this issue.
Extend existing workqueue mechanism for multicast configuration only
to universal use, so that all configuring through mailbox asynchronously
can utilize it.
Fixes: 859a497fe80c ("nfp: implement xfrm callbacks and expose ipsec offload feature to upper layer")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mailbox configuration mechanism requires writing several registers,
which shouldn't be interrupted, so need lock to avoid race condition.
The base offset of mailbox configuration registers is not fixed, it
depends on TLV caps read from application firmware.
Fixes: 859a497fe80c ("nfp: implement xfrm callbacks and expose ipsec offload feature to upper layer")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Code blocks handling BCMA_CHIP_ID_BCM5357 and BCMA_CHIP_ID_BCM53572 were
incorrectly unified. Chip package values are not unique and cannot be
checked independently. They are meaningful only in a context of a given
chip.
Packages BCM5358 and BCM47188 share the same value but then belong to
different chips. Code unification resulted in treating BCM5358 as
BCM47188 and broke its initialization.
Link: https://github.com/openwrt/openwrt/issues/8278
Fixes: cb1b0f90acfe ("net: ethernet: bgmac: unify code of the same family")
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230208091637.16291-1-zajec5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add IPsec offloading support for NFP3800. Include data
plane and control plane.
Data plane: add IPsec packet process flow in NFP3800
datapath (NFDk).
Control plane: add an algorithm support distinction flow
in xfrm hook function xdo_dev_state_add(), as NFP3800 has
a different set of IPsec algorithm support.
This matches existing support for the NFP6000/NFP4000 and
their NFD3 datapath.
In addition, fixup the md_bytes calculation for NFD3 datapath
to make sure the two datapahts are keept in sync.
Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230208091000.4139974-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes.
The amdgpu had a few small fixes to display flicker on certain
configurations, however it was found the the flicker was lessened but
there were other unintended consequences, so for now they've been
reverted and replaced with an option for users to test with so future
fixes can be developed.
Otherwise apart from the usual bunch of i915 and amdgpu, there's a
client, virtio-gpu and an nvidiafb fix that reorders its loading to
avoid failure.
client:
- refcount fix
amdgpu:
- a bunch of attempted flicker fixes that regressed turned into a
user workaround option for now
- Properly fix S/G display with AGP aperture enabled
- Fix cursor offset with 180 rotation
- SMU13 fixes
- Use TGID for GPUVM traces
- Fix oops on in fence error path
- Don't run IB tests on hw rings when sw rings are in use
- memory leak fix
i915:
- Display watermark fix
- fbdev fix for PSR, FBC, DRRS
- Move fd_install after last use of fence
- Initialize the obj flags for shmem objects
- Fix VBT DSI DVO port handling
virtio-gpu:
- fence fix
nvidiafb:
- regression fix for driver load when no hw supported"
* tag 'drm-fixes-2023-02-10' of git://anongit.freedesktop.org/drm/drm: (27 commits)
Revert "drm/amd/display: disable S/G display on DCN 3.1.5"
Revert "drm/amd/display: disable S/G display on DCN 2.1.0"
Revert "drm/amd/display: disable S/G display on DCN 3.1.2/3"
drm/amdgpu: add S/G display parameter
drm/amdgpu/smu: skip pptable init under sriov
amd/amdgpu: remove test ib on hw ring
drm/amdgpu/fence: Fix oops due to non-matching drm_sched init/fini
drm/amdgpu: Use the TGID for trace_amdgpu_vm_update_ptes
drm/amdgpu: Add unique_id support for GC 11.0.1/2
drm/amd/pm: bump SMU 13.0.7 driver_if header version
drm/amd/pm: bump SMU 13.0.0 driver_if header version
drm/amd/pm: add SMU 13.0.7 missing GetPptLimit message mapping
drm/amd/display: fix cursor offset on rotation 180
drm/amd/amdgpu: enable athub cg 11.0.3
Revert "drm/amd/display: disable S/G display on DCN 3.1.4"
drm/amd/display: properly handling AGP aperture in vm setup
drm/amd/display: disable S/G display on DCN 3.1.2/3
drm/amd/display: disable S/G display on DCN 2.1.0
drm/i915: Fix VBT DSI DVO port handling
drm/client: fix circular reference counting issue
...
|
|
Paolo Abeni says:
====================
net: introduce rps_default_mask
Real-time setups try hard to ensure proper isolation between time
critical applications and e.g. network processing performed by the
network stack in softirq and RPS is used to move the softirq
activity away from the isolated core.
If the network configuration is dynamic, with netns and devices
routinely created at run-time, enforcing the correct RPS setting
on each newly created device allowing to transient bad configuration
became complex.
Additionally, when multi-queue devices are involved, configuring rps
in user-space on each queue easily becomes very expensive, e.g.
some setups use veths with per cpu queues.
These series try to address the above, introducing a new
sysctl knob: rps_default_mask. The new sysctl entry allows
configuring a netns-wide RPS mask, to be enforced since receive
queue creation time without any fourther per device configuration
required.
Additionally, a simple self-test is introduced to check the
rps_default_mask behavior.
====================
Link: https://lore.kernel.org/r/cover.1675789134.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure that RPS default mask changes take place on
all newly created netns/devices and don't affect
existing ones.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If RPS is enabled, this allows configuring a default rps
mask, which is effective since receive queue creation time.
A default RPS mask allows the system admin to ensure proper
isolation, avoiding races at network namespace or device
creation time.
The default RPS mask is initially empty, and can be
modified via a newly added sysctl entry.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Will simplify the following patch. No functional change
intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Will be used by the following patch to avoid code
duplication. No functional changes intended.
The only difference is that now flow_limit_cpu_sysctl() will
always compute the flow limit mask on each read operation,
even when read() will not return any byte to user-space.
Note that the new helper is placed under a new #ifdef at
the file start to better fit the usage in the later patch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull rdma fixes from Jason Gunthorpe:
"The usual collection of small driver bug fixes:
- Fix error unwind bugs in hfi1, irdma rtrs
- Old bug with IPoIB children interfaces possibly using the wrong
number of queues
- Really old bug in usnic calling iommu_map in an atomic context
- Recent regression from the DMABUF locking rework
- Missing user data validation in MANA"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/rtrs: Don't call kobject_del for srv_path->kobj
RDMA/mana_ib: Prevent array underflow in mana_ib_create_qp_raw()
IB/hfi1: Assign npages earlier
RDMA/umem: Use dma-buf locked API to solve deadlock
RDMA/usnic: use iommu_map_atomic() under spin_lock()
RDMA/irdma: Fix potential NULL-ptr-dereference
IB/IPoIB: Fix legacy IPoIB due to wrong number of queues
IB/hfi1: Restore allocated resources on failed copyout
|
|
Patch series "Fix kmemleak crashes when scanning CMA regions", v2.
When trying to boot a device with an ARM64 kernel with the following
config options enabled:
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT=y
CONFIG_DEBUG_KMEMLEAK=y
a crash is encountered when kmemleak starts to scan the list of gray
or allocated objects that it maintains. Upon closer inspection, it was
observed that these page-faults always occurred when kmemleak attempted
to scan a CMA region.
At the moment, kmemleak is made aware of CMA regions that are specified
through the devicetree to be dynamically allocated within a range of
addresses. However, kmemleak should not need to scan CMA regions or any
reserved memory region, as those regions can be used for DMA transfers
between drivers and peripherals, and thus wouldn't contain anything
useful for kmemleak.
Additionally, since CMA regions are unmapped from the kernel's address
space when they are freed to the buddy allocator at boot when
CONFIG_DEBUG_PAGEALLOC is enabled, kmemleak shouldn't attempt to access
those memory regions, as that will trigger a crash. Thus, kmemleak
should ignore all dynamically allocated reserved memory regions.
This patch (of 1):
Currently, kmemleak ignores dynamically allocated reserved memory regions
that don't have a kernel mapping. However, regions that do retain a
kernel mapping (e.g. CMA regions) do get scanned by kmemleak.
This is not ideal for two reasons:
1 kmemleak works by scanning memory regions for pointers to allocated
objects to determine if those objects have been leaked or not.
However, reserved memory regions can be used between drivers and
peripherals for DMA transfers, and thus, would not contain pointers to
allocated objects, making it unnecessary for kmemleak to scan these
reserved memory regions.
2 When CONFIG_DEBUG_PAGEALLOC is enabled, along with kmemleak, the
CMA reserved memory regions are unmapped from the kernel's address
space when they are freed to buddy at boot. These CMA reserved regions
are still tracked by kmemleak, however, and when kmemleak attempts to
scan them, a crash will happen, as accessing the CMA region will result
in a page-fault, since the regions are unmapped.
Thus, use kmemleak_ignore_phys() for all dynamically allocated reserved
memory regions, instead of those that do not have a kernel mapping
associated with them.
Link: https://lkml.kernel.org/r/20230208232001.2052777-1-isaacmanjarres@google.com
Link: https://lkml.kernel.org/r/20230208232001.2052777-2-isaacmanjarres@google.com
Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private")
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Kirill A. Shutemov <kirill.shtuemov@linux.intel.com>
Cc: Nick Kossifidis <mick@ics.forth.gr>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Saravana Kannan <saravanak@google.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When printing the name of the current process, it will report an error:
(gdb) p $lx_current().comm Python Exception <class 'gdb.error'> No symbol
"current_task" in current context.: Error occurred in Python: No symbol
"current_task" in current context.
Because e57ef2ed97c1 ("x86: Put hot per CPU variables into a struct")
changed it.
Link: https://lkml.kernel.org/r/20230204090139.1789264-1-xiehuan09@gmail.com
Fixes: e57ef2ed97c1 ("x86: Put hot per CPU variables into a struct")
Signed-off-by: Jeff Xie <xiehuan09@gmail.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Memory will be allocated to store substring_t in match_strdup(), which
means the caller of match_strdup() may need to be scheduled out to wait
for reclaiming memory. smatch complains that this can cuase sleeping in
an atoic context.
Using local array to store substring_t to remove the restriction.
Link: https://lkml.kernel.org/r/20230120032352.242767-1-lilingfeng3@huawei.com
Link: https://lore.kernel.org/all/20221104023938.2346986-5-yukuai1@huaweicloud.com/
Link: https://lkml.kernel.org/r/20230120032352.242767-1-lilingfeng3@huawei.com
Fixes: 2c0647988433 ("blk-iocost: don't release 'ioc->lock' while updating params")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reported-by: Yu Kuai <yukuai1@huaweicloud.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: BingJing Chang <bingjingc@synology.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Hou Tao <houtao1@huawei.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: yangerkun <yangerkun@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The debugfs_remove_recursive() is invoked by unregister_shrinker(), which
is holding the write lock of shrinker_rwsem. It will waits for the
handler of debugfs file complete. The handler also needs to hold the read
lock of shrinker_rwsem to do something. So it may cause the following
deadlock:
CPU0 CPU1
debugfs_file_get()
shrinker_debugfs_count_show()/shrinker_debugfs_scan_write()
unregister_shrinker()
--> down_write(&shrinker_rwsem);
debugfs_remove_recursive()
// wait for (A)
--> wait_for_completion();
// wait for (B)
--> down_read_killable(&shrinker_rwsem)
debugfs_file_put() -- (A)
up_write() -- (B)
The down_read_killable() can be killed, so that the above deadlock can be
recovered. But it still requires an extra kill action, otherwise it will
block all subsequent shrinker-related operations, so it's better to fix
it.
[akpm@linux-foundation.org: fix CONFIG_SHRINKER_DEBUG=n stub]
Link: https://lkml.kernel.org/r/20230202105612.64641-1-zhengqi.arch@bytedance.com
Fixes: 5035ebc644ae ("mm: shrinkers: introduce debugfs interface for memory shrinkers")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the kernel copies a page from ksm_might_need_to_copy(), but runs into
an uncorrectable error, it will crash since poisoned page is consumed by
kernel, this is similar to the issue recently fixed by Copy-on-write
poison recovery.
When an error is detected during the page copy, return VM_FAULT_HWPOISON
in do_swap_page(), and install a hwpoison entry in unuse_pte() when
swapoff, which help us to avoid system crash. Note, memory failure on a
KSM page will be skipped, but still call memory_failure_queue() to be
consistent with general memory failure process, and we could support KSM
page recovery in the feature.
[wangkefeng.wang@huawei.com: enhance unuse_pte(), fix issue found by lkp]
Link: https://lkml.kernel.org/r/20221213120523.141588-1-wangkefeng.wang@huawei.com
[wangkefeng.wang@huawei.com: update changelog, alter ksm_might_need_to_copy(), restore unlikely() in unuse_pte()]
Link: https://lkml.kernel.org/r/20230201074433.96641-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20221209072801.193221-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On powerpc64, you can build a kernel with KASAN as soon as you build it
with RADIX MMU support. However if the CPU doesn't have RADIX MMU, KASAN
isn't enabled at init and the following Oops is encountered.
[ 0.000000][ T0] KASAN not enabled as it requires radix!
[ 4.484295][ T26] BUG: Unable to handle kernel data access at 0xc00e000000804a04
[ 4.485270][ T26] Faulting instruction address: 0xc00000000062ec6c
[ 4.485748][ T26] Oops: Kernel access of bad area, sig: 11 [#1]
[ 4.485920][ T26] BE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
[ 4.486259][ T26] Modules linked in:
[ 4.486637][ T26] CPU: 0 PID: 26 Comm: kworker/u2:2 Not tainted 6.2.0-rc3-02590-gf8a023b0a805 #249
[ 4.486907][ T26] Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1200 0xf000005 of:SLOF,HEAD pSeries
[ 4.487445][ T26] Workqueue: eval_map_wq .tracer_init_tracefs_work_func
[ 4.488744][ T26] NIP: c00000000062ec6c LR: c00000000062bb84 CTR: c0000000002ebcd0
[ 4.488867][ T26] REGS: c0000000049175c0 TRAP: 0380 Not tainted (6.2.0-rc3-02590-gf8a023b0a805)
[ 4.489028][ T26] MSR: 8000000002009032 <SF,VEC,EE,ME,IR,DR,RI> CR: 44002808 XER: 00000000
[ 4.489584][ T26] CFAR: c00000000062bb80 IRQMASK: 0
[ 4.489584][ T26] GPR00: c0000000005624d4 c000000004917860 c000000001cfc000 1800000000804a04
[ 4.489584][ T26] GPR04: c0000000003a2650 0000000000000cc0 c00000000000d3d8 c00000000000d3d8
[ 4.489584][ T26] GPR08: c0000000049175b0 a80e000000000000 0000000000000000 0000000017d78400
[ 4.489584][ T26] GPR12: 0000000044002204 c000000003790000 c00000000435003c c0000000043f1c40
[ 4.489584][ T26] GPR16: c0000000043f1c68 c0000000043501a0 c000000002106138 c0000000043f1c08
[ 4.489584][ T26] GPR20: c0000000043f1c10 c0000000043f1c20 c000000004146c40 c000000002fdb7f8
[ 4.489584][ T26] GPR24: c000000002fdb834 c000000003685e00 c000000004025030 c000000003522e90
[ 4.489584][ T26] GPR28: 0000000000000cc0 c0000000003a2650 c000000004025020 c000000004025020
[ 4.491201][ T26] NIP [c00000000062ec6c] .kasan_byte_accessible+0xc/0x20
[ 4.491430][ T26] LR [c00000000062bb84] .__kasan_check_byte+0x24/0x90
[ 4.491767][ T26] Call Trace:
[ 4.491941][ T26] [c000000004917860] [c00000000062ae70] .__kasan_kmalloc+0xc0/0x110 (unreliable)
[ 4.492270][ T26] [c0000000049178f0] [c0000000005624d4] .krealloc+0x54/0x1c0
[ 4.492453][ T26] [c000000004917990] [c0000000003a2650] .create_trace_option_files+0x280/0x530
[ 4.492613][ T26] [c000000004917a90] [c000000002050d90] .tracer_init_tracefs_work_func+0x274/0x2c0
[ 4.492771][ T26] [c000000004917b40] [c0000000001f9948] .process_one_work+0x578/0x9f0
[ 4.492927][ T26] [c000000004917c30] [c0000000001f9ebc] .worker_thread+0xfc/0x950
[ 4.493084][ T26] [c000000004917d60] [c00000000020be84] .kthread+0x1a4/0x1b0
[ 4.493232][ T26] [c000000004917e10] [c00000000000d3d8] .ret_from_kernel_thread+0x58/0x60
[ 4.495642][ T26] Code: 60000000 7cc802a6 38a00000 4bfffc78 60000000 7cc802a6 38a00001 4bfffc68 60000000 3d20a80e 7863e8c2 792907c6 <7c6348ae> 20630007 78630fe0 68630001
[ 4.496704][ T26] ---[ end trace 0000000000000000 ]---
The Oops is due to kasan_byte_accessible() not checking the readiness of
KASAN. Add missing call to kasan_arch_is_ready() and bail out when not
ready. The same problem is observed with ____kasan_kfree_large() so fix
it the same.
Also, as KASAN is not available and no shadow area is allocated for linear
memory mapping, there is no point in allocating shadow mem for vmalloc
memory as shown below in /sys/kernel/debug/kernel_page_tables
---[ kasan shadow mem start ]---
0xc00f000000000000-0xc00f00000006ffff 0x00000000040f0000 448K r w pte valid present dirty accessed
0xc00f000000860000-0xc00f00000086ffff 0x000000000ac10000 64K r w pte valid present dirty accessed
0xc00f3ffffffe0000-0xc00f3fffffffffff 0x0000000004d10000 128K r w pte valid present dirty accessed
---[ kasan shadow mem end ]---
So, also verify KASAN readiness before allocating and poisoning
shadow mem for VMAs.
Link: https://lkml.kernel.org/r/150768c55722311699fdcf8f5379e8256749f47d.1674716617.git.christophe.leroy@csgroup.eu
Fixes: 41b7a347bf14 ("powerpc: Book3S 64-bit outline-only KASAN support")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reported-by: Nathan Lynch <nathanl@linux.ibm.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.2-2023-02-09:
amdgpu:
- Add a parameter to disable S/G display
- Re-enable S/G display on all DCNs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209174504.7577-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Display watermark fix (Ville)
- fbdev fix for PSR, FBC, DRRS (Jouni)
- Move fd_install after last use of fence (Rob)
- Initialize the obj flags for shmem objects (Aravind)
- Fix VBT DSI DVO port handling (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y+UZ0rh2YlhTrE4t@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A fix for a circular refcounting in drm/client, one for a memory leak in
amdgpu and a virtio fence fix when interrupted
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209083600.7hi6roht6xxgldgz@houat
|
|
Antenna gain is defined as the antenna’s ability to
increase the Tx power in a given direction. Intel
is certifying its products with fixed reference
antenna peak gain values (3/5dBi). The feature takes
into account the actual antenna gain, and increases
output power values, which results in a performance
improvement.
After firmware download is completed, driver reads from
ACPI table and configures PPAG as required. ACPI table
entry for PPAG is defined as below.
Name (PPAG, Package (0x02)
{
0x00000001,
Package (0x02)
{
0x00000012, /* Bluetooth Domain */
0x00000001 /* 1 - Enable PPAG, 0 - Disable PPAG */
}
})
btmon log:
< HCI Command: Intel Configure Per Platform Antenna Gain (0x3f|0x0219) plen 12
Mcc: 0x00000000
Selector: Enable
Delta: 0x00000000
> HCI Event: Command Complete (0x0e) plen 4
Intel Configure Per Platform Antenna Gain (0x3f|0x0219) ncmd 1
Status: Success (0x00)
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Seema Sreemantha <seema.sreemantha@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When sending LE create conn command, we set a timer with a duration of
HCI_LE_CONN_TIMEOUT before timing out and calling
create_le_conn_complete. Additionally, when receiving the command
complete, we also set a timer with the same duration to call
le_conn_timeout.
Usually the latter will be triggered first, which then sends a LE
create conn cancel command. However, due to the nature of racing, it
is possible for the former to be called first, thereby calling the
chain hci_conn_failed -> hci_conn_del -> cancel_delayed_work, thereby
preventing LE create conn cancel to be sent. In this situation, the
controller will be stuck in trying the LE connection.
This patch flushes le_conn_timeout on create_le_conn_complete to make
sure we always send LE create connection cancel, if necessary.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
It is possible to initiate a SCO connection while deleting the
corresponding ACL connection, e.g. in below scenario:
(1) < hci setup sync connect command
(2) > hci disconn complete event (for the acl connection)
(3) > hci command complete event (for(1), failure)
When it happens, hci_cs_setup_sync_conn won't be able to obtain the
reference to the SCO connection, so it will be stuck and potentially
hinder subsequent connections to the same device.
This patch prevents that by also deleting the SCO connection if it is
still not established when the corresponding ACL connection is deleted.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Bluetooth controller attached via the UART is handled by the serdev driver.
Get the wakeup status from the device handle through serdev, instead of the
parent path.
Fixes: c1a74160eaf1 ("Bluetooth: hci_qca: Add device_may_wakeup support")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes all instances of which requires to allocate a buffer calling
alloc_skb which may release the chan lock and reacquire later which
makes it possible that the chan is disconnected in the meantime.
Fixes: a6a5568c03c4 ("Bluetooth: Lock the L2CAP channel when sending")
Reported-by: Alexander Coffin <alex.coffin@matician.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Userspace needs to know whether the adapter has feature support for
Connected Isochronous Stream - Central/Peripheral, so it can set up
LE Audio features accordingly.
Expose these feature bits as settings in MGMT controller info.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The compiler thinks "conn" might be NULL after a call to hci_bind_bis(),
which cannot happen. Avoid any confusion by just making it not return a
value since it cannot fail. Fixes the warnings seen with GCC 13:
In function 'arch_atomic_dec_and_test',
inlined from 'atomic_dec_and_test' at ../include/linux/atomic/atomic-instrumented.h:576:9,
inlined from 'hci_conn_drop' at ../include/net/bluetooth/hci_core.h:1391:6,
inlined from 'hci_connect_bis' at ../net/bluetooth/hci_conn.c:2124:3:
../arch/x86/include/asm/rmwcc.h:37:9: warning: array subscript 0 is outside array bounds of 'atomic_t[0]' [-Warray-bounds=]
37 | asm volatile (fullop CC_SET(cc) \
| ^~~
...
In function 'hci_connect_bis':
cc1: note: source object is likely at address zero
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Zero-length arrays are deprecated[1] and we are moving towards
adopting C99 flexible-array members instead. So, replace zero-length
arrays in a couple of structures with flex-array members.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [2].
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays [1]
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [2]
Link: https://github.com/KSPP/linux/issues/78
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the following warnings:
drivers/bluetooth/hci_qca.c:1014:26: warning: cast to restricted __le16
drivers/bluetooth/hci_qca.c:1028:37: warning: cast to restricted __le32
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This patch adds VID:PID 13d3:3529 to the btusb.c file.
This VID:PID is found in the Realtek RTL8821CE module
(M.2 module AW-CB304NF on an ASUS E210MA laptop)
Output of /sys/kernel/debug/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3529 Rev= 1.10
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Moises Cardona <moisesmcardona@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This bluetooth device is found in a combo WLAN/BT card
for a MediaTek 7921e.
The device information:
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e0f2 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Their devices claim to support the erroneous data reporting, but don't
actually support the required commands. So blacklist them and add a
quirk.
< HCI Command: Read Default Erroneous Data Reporting (0x03|0x005a) plen 0
> HCI Event: Command Status (0x0f) plen 4
Read Default Erroneous Data Reporting (0x03|0x005a) ncmd 1
Status: Unknown HCI Command (0x01)
T: Bus=02 Lev=02 Prnt=08 Port=02 Cnt=01 Dev#= 10 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=10d7 ProdID=b012 Rev=88.91
S: Manufacturer=Actions
S: Product=general adapter
S: SerialNumber=ACTIONS1234
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=01(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=01(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=01(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=01(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=01(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=01(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
net/devlink/leftover.c / net/core/devlink.c:
565b4824c39f ("devlink: change port event netdev notifier from per-net to global")
f05bd8ebeb69 ("devlink: move code to a dedicated directory")
687125b5799c ("devlink: split out core code")
https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Thorsten reported build issue with command line that defined extra
HOSTCFLAGS that were not passed into 'prepare' targets, but were
used to build resolve_btfids objects.
This results in build fail when these objects are linked together:
/usr/bin/ld: /build.../tools/bpf/resolve_btfids//libbpf/libbpf.a(libbpf-in.o):
relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a PIE \
object; recompile with -fPIE
Fixing this by passing HOSTCFLAGS in EXTRA_CFLAGS as part of
HOST_OVERRIDES variable for prepare targets.
[1] https://lore.kernel.org/bpf/f7922132-6645-6316-5675-0ece4197bfff@leemhuis.info/
Fixes: 56a2df7615fa ("tools/resolve_btfids: Compile resolve_btfids as host program")
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/bpf/20230209143735.4112845-1-jolsa@kernel.org
|
|
In commit 588a513d3425 ("arm64: Fix race condition on PG_dcache_clean
in __sync_icache_dcache()"), we found RISC-V has the same issue as the
previous arm64. The previous implementation didn't guarantee the correct
sequence of operations, which means flush_icache_all() hasn't been
called when the PG_dcache_clean was set. That would cause a risk of page
synchronization.
Fixes: 08f051eda33b ("RISC-V: Flush I$ when making a dirty page executable")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230127035306.1819561-1-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The current kprobe would cause a misaligned load for the probe point.
This patch fixup it with two half-word loads instead.
Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/linux-riscv/878rhig9zj.fsf@all.your.base.are.belong.to.us/
Reported-by: Bjorn Topel <bjorn.topel@gmail.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230204063531.740220-1-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix the incorrect value returned by cpufreq driver's ->get() callback
for Qualcomm platforms (Douglas Anderson)"
* tag 'pm-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: qcom-hw: Fix cpufreq_driver->get() for non-LMH systems
|
|
syzbot and other bots reported that we have to enable
user copy to/from skb->head. [1]
We can prevent access to skb_shared_info, which is a nice
improvement over standard kmem_cache.
Layout of these kmem_cache objects is:
< SKB_SMALL_HEAD_HEADROOM >< struct skb_shared_info >
usercopy: Kernel memory overwrite attempt detected to SLUB object 'skbuff_small_head' (offset 32, size 20)!
------------[ cut here ]------------
kernel BUG at mm/usercopy.c:102 !
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.2.0-rc6-syzkaller-01425-gcb6b2e11a42d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
RIP: 0010:usercopy_abort+0xbd/0xbf mm/usercopy.c:102
Code: e8 ee ad ba f7 49 89 d9 4d 89 e8 4c 89 e1 41 56 48 89 ee 48 c7 c7 20 2b 5b 8a ff 74 24 08 41 57 48 8b 54 24 20 e8 7a 17 fe ff <0f> 0b e8 c2 ad ba f7 e8 7d fb 08 f8 48 8b 0c 24 49 89 d8 44 89 ea
RSP: 0000:ffffc90000067a48 EFLAGS: 00010286
RAX: 000000000000006b RBX: ffffffff8b5b6ea0 RCX: 0000000000000000
RDX: ffff8881401c0000 RSI: ffffffff8166195c RDI: fffff5200000cf3b
RBP: ffffffff8a5b2a60 R08: 000000000000006b R09: 0000000000000000
R10: 0000000080000000 R11: 0000000000000000 R12: ffffffff8bf2a925
R13: ffffffff8a5b29a0 R14: 0000000000000014 R15: ffffffff8a5b2960
FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000000c48e000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__check_heap_object+0xdd/0x110 mm/slub.c:4761
check_heap_object mm/usercopy.c:196 [inline]
__check_object_size mm/usercopy.c:251 [inline]
__check_object_size+0x1da/0x5a0 mm/usercopy.c:213
check_object_size include/linux/thread_info.h:199 [inline]
check_copy_size include/linux/thread_info.h:235 [inline]
copy_from_iter include/linux/uio.h:186 [inline]
copy_from_iter_full include/linux/uio.h:194 [inline]
memcpy_from_msg include/linux/skbuff.h:3977 [inline]
qrtr_sendmsg+0x65f/0x970 net/qrtr/af_qrtr.c:965
sock_sendmsg_nosec net/socket.c:722 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:745
say_hello+0xf6/0x170 net/qrtr/ns.c:325
qrtr_ns_init+0x220/0x2b0 net/qrtr/ns.c:804
qrtr_proto_init+0x59/0x95 net/qrtr/af_qrtr.c:1296
do_one_initcall+0x141/0x790 init/main.c:1306
do_initcall_level init/main.c:1379 [inline]
do_initcalls init/main.c:1395 [inline]
do_basic_setup init/main.c:1414 [inline]
kernel_init_freeable+0x6f9/0x782 init/main.c:1634
kernel_init+0x1e/0x1d0 init/main.c:1522
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
</TASK>
Fixes: bf9f1baa279f ("net: add dedicated kmem_cache for typical/small skb->head")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/linux-next/CA+G9fYs-i-c2KTSA7Ai4ES_ZESY1ZnM=Zuo8P1jN00oed6KHMA@mail.gmail.com
Link: https://lore.kernel.org/r/20230208142508.3278406-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and ipsec subtrees.
Current release - regressions:
- sched: fix off by one in htb_activate_prios()
- eth: mana: fix accessing freed irq affinity_hint
- eth: ice: fix out-of-bounds KASAN warning in virtchnl
Current release - new code bugs:
- eth: mtk_eth_soc: enable special tag when any MAC uses DSA
Previous releases - always broken:
- core: fix sk->sk_txrehash default
- neigh: make sure used and confirmed times are valid
- mptcp: be careful on subflow status propagation on errors
- xfrm: prevent potential spectre v1 gadget in xfrm_xlate32_attr()
- phylink: move phy_device_free() to correctly release phy device
- eth: mlx5:
- fix crash unsetting rx-vlan-filter in switchdev mode
- fix hang on firmware reset
- serialize module cleanup with reload and remove"
* tag 'net-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
selftests: forwarding: lib: quote the sysctl values
net: mscc: ocelot: fix all IPv6 getting trapped to CPU when PTP timestamping is used
rds: rds_rm_zerocopy_callback() use list_first_entry()
net: txgbe: Update support email address
selftests: Fix failing VXLAN VNI filtering test
selftests: mptcp: stop tests earlier
selftests: mptcp: allow more slack for slow test-case
mptcp: be careful on subflow status propagation on errors
mptcp: fix locking for in-kernel listener creation
mptcp: fix locking for setsockopt corner-case
mptcp: do not wait for bare sockets' timeout
net: ethernet: mtk_eth_soc: fix DSA TX tag hwaccel for switch port 0
nfp: ethtool: fix the bug of setting unsupported port speed
txhash: fix sk->sk_txrehash default
net: ethernet: mtk_eth_soc: fix wrong parameters order in __xdp_rxq_info_reg()
net: ethernet: mtk_eth_soc: enable special tag when any MAC uses DSA
net: sched: sch: Fix off by one in htb_activate_prios()
igc: Add ndo_tx_timeout support
net: mana: Fix accessing freed irq affinity_hint
hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMIC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix potential infinite loop with a badly crafted HID device (Xin
Zhao)
- fix regression from 6.1 in USB logitech devices potentially making
their mouse wheel not working (Bastien Nocera)
- clean up in AMD sensors, which fixes a long time resume bug (Mario
Limonciello)
- few device small fixes and quirks
* tag 'for-linus-2023020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: Ignore battery for ELAN touchscreen 29DF on HP
HID: amd_sfh: if no sensors are enabled, clean up
HID: logitech: Disable hi-res scrolling on USB
HID: core: Fix deadloop in hid_apply_multiplier.
HID: Ignore battery for Elan touchscreen on Asus TP420IA
HID: elecom: add support for TrackBall 056E:011C
|
|
Pull cifx fix from Steve French:
"Small fix for use after free"
* tag '6.2-rc8-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix use-after-free in rdata->read_into_pages()
|
|
Zero-length arrays are deprecated[1]. Replace struct i40e_lump_tracking's
"list" 0-length array with a flexible array. Detected with GCC 13,
using -fstrict-flex-arrays=3:
In function 'i40e_put_lump',
inlined from 'i40e_clear_interrupt_scheme' at drivers/net/ethernet/intel/i40e/i40e_main.c:5145:2:
drivers/net/ethernet/intel/i40e/i40e_main.c:278:27: warning: array subscript <unknown> is outside array bounds of 'u16[0]' {aka 'short unsigned int[]'} [-Warray-bounds=]
278 | pile->list[i] = 0;
| ~~~~~~~~~~^~~
drivers/net/ethernet/intel/i40e/i40e.h: In function 'i40e_clear_interrupt_scheme':
drivers/net/ethernet/intel/i40e/i40e.h:179:13: note: while referencing 'list'
179 | u16 list[0];
| ^~~~
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In i40e_status removal patches, i40e_status conversion
to strings was removed in order to easily refactor
the code to use standard errornums. This however made it
more difficult for read error logs.
Use %pe formatter to print error messages in human-readable
format.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
To prepare for removal of i40e_status, change the variables
from i40e_status to int. This eases the transition when values
are changed to return standard int error codes over enum i40e_status.
As such changes often also change variable orders, a cleanup
is also applied here to make variables conform to RCT and
some lines are also reformatted where applicable.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove the i40e_stat_str() function which prints the string
representation of the i40e_status error code. With upcoming changes
moving away from i40e_status, there will be no need for this function
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
