| Age | Commit message (Collapse) | Author |
|---|
|
In prepare_vm(), 'data->nslots' is assigned with 'max_mem_slots - 1'
at the beginning, meaning they are interchangeable.
Use 'data->nslots' isntead of 'max_mem_slots - 1'. With this, it
becomes easier to move the logic of probing number of slots into
upper layer in subsequent patches.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020071209.559062-2-gshan@redhat.com
|
|
The stage-2 map walker has been made parallel-aware, and as such can be
called while only holding the read side of the MMU lock. Rip out the
conditional locking in user_mem_abort() and instead grab the read lock.
Continue to take the write lock from other callsites to
kvm_pgtable_stage2_map().
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107220033.1895655-1-oliver.upton@linux.dev
|
|
stage2_map_walker_try_leaf() and friends now handle stage-2 PTEs
generically, and perform the correct flush when a table PTE is removed.
Additionally, they've been made parallel-aware, using an atomic break
to take ownership of the PTE.
Stop clearing the PTE in the pre-order callback and instead let
stage2_map_walker_try_leaf() deal with it.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107220006.1895572-1-oliver.upton@linux.dev
|
|
Convert stage2_map_walker_try_leaf() to use the new break-before-make
helpers, thereby making the handler parallel-aware. As before, avoid the
break-before-make if recreating the existing mapping. Additionally,
retry execution if another vCPU thread is modifying the same PTE.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215934.1895478-1-oliver.upton@linux.dev
|
|
In order to service stage-2 faults in parallel, stage-2 table walkers
must take exclusive ownership of the PTE being worked on. An additional
requirement of the architecture is that software must perform a
'break-before-make' operation when changing the block size used for
mapping memory.
Roll these two concepts together into helpers for performing a
'break-before-make' sequence. Use a special PTE value to indicate a PTE
has been locked by a software walker. Additionally, use an atomic
compare-exchange to 'break' the PTE when the stage-2 page tables are
possibly shared with another software walker. Elide the DSB + TLBI if
the evicted PTE was invalid (and thus not subject to break-before-make).
All of the atomics do nothing for now, as the stage-2 walker isn't fully
ready to perform parallel walks.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215855.1895367-1-oliver.upton@linux.dev
|
|
Create a helper to initialize a table and directly call
smp_store_release() to install it (for now). Prepare for a subsequent
change that generalizes PTE writes with a helper.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-11-oliver.upton@linux.dev
|
|
The stage2 attr walker is already used for parallel walks. Since commit
f783ef1c0e82 ("KVM: arm64: Add fast path to handle permission relaxation
during dirty logging"), KVM acquires the read lock when
write-unprotecting a PTE. However, the walker only uses a simple store
to update the PTE. This is safe as the only possible race is with
hardware updates to the access flag, which is benign.
However, a subsequent change to KVM will allow more changes to the stage
2 page tables to be done in parallel. Prepare the stage 2 attribute
walker by performing atomic updates to the PTE when walking in parallel.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-10-oliver.upton@linux.dev
|
|
Use RCU to safely walk the stage-2 page tables in parallel. Acquire and
release the RCU read lock when traversing the page tables. Defer the
freeing of table memory to an RCU callback. Indirect the calls into RCU
and provide stubs for hypervisor code, as RCU is not available in such a
context.
The RCU protection doesn't amount to much at the moment, as readers are
already protected by the read-write lock (all walkers that free table
memory take the write lock). Nonetheless, a subsequent change will
futher relax the locking requirements around the stage-2 MMU, thereby
depending on RCU.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-9-oliver.upton@linux.dev
|
|
The break-before-make sequence is a bit annoying as it opens a window
wherein memory is unmapped from the guest. KVM should replace the PTE
as quickly as possible and avoid unnecessary work in between.
Presently, the stage-2 map walker tears down a removed table before
installing a block mapping when coalescing a table into a block. As the
removed table is no longer visible to hardware walkers after the
DSB+TLBI, it is possible to move the remaining cleanup to happen after
installing the new PTE.
Reshuffle the stage-2 map walker to install the new block entry in
the pre-order callback. Unwire all of the teardown logic and replace
it with a call to kvm_pgtable_stage2_free_removed() after fixing
the PTE. The post-order visitor is now completely unnecessary, so drop
it. Finally, touch up the comments to better represent the now
simplified map walker.
Note that the call to tear down the unlinked stage-2 is indirected
as a subsequent change will use an RCU callback to trigger tear down.
RCU is not available to pKVM, so there is a need to use different
implementations on pKVM and non-pKVM VMs.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-8-oliver.upton@linux.dev
|
|
Use an opaque type for pteps and require visitors explicitly dereference
the pointer before using. Protecting page table memory with RCU requires
that KVM dereferences RCU-annotated pointers before using. However, RCU
is not available for use in the nVHE hypervisor and the opaque type can
be conditionally annotated with RCU for the stage-2 MMU.
Call the type a 'pteref' to avoid a naming collision with raw pteps. No
functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-7-oliver.upton@linux.dev
|
|
A subsequent change to KVM will move the tear down of an unlinked
stage-2 subtree out of the critical path of the break-before-make
sequence.
Introduce a new helper for tearing down unlinked stage-2 subtrees.
Leverage the existing stage-2 free walkers to do so, with a deep call
into __kvm_pgtable_walk() as the subtree is no longer reachable from the
root.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-6-oliver.upton@linux.dev
|
|
In order to tear down page tables from outside the context of
kvm_pgtable (such as an RCU callback), stop passing a pointer through
kvm_pgtable_walk_data.
No functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-5-oliver.upton@linux.dev
|
|
As a prerequisite for getting visitors off of struct kvm_pgtable, pass
mm_ops through the visitor context.
No functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-4-oliver.upton@linux.dev
|
|
Rather than reading the ptep all over the shop, read the ptep once from
__kvm_pgtable_visit() and stick it in the visitor context. Reread the
ptep after visiting a leaf in case the callback installed a new table
underneath.
No functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-3-oliver.upton@linux.dev
|
|
Passing new arguments by value to the visitor callbacks is extremely
inflexible for stuffing new parameters used by only some of the
visitors. Use a context structure instead and pass the pointer through
to the visitor callback.
While at it, redefine the 'flags' parameter to the visitor to contain
the bit indicating the phase of the walk. Pass the entire set of flags
through the context structure such that the walker can communicate
additional state to the visitor callback.
No functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-2-oliver.upton@linux.dev
|
|
In the dirty ring case, we rely on vcpu exit due to full dirty ring
state. On ARM64 system, there are 4096 host pages when the host
page size is 64KB. In this case, the vcpu never exits due to the
full dirty ring state. The similar case is 4KB page size on host
and 64KB page size on guest. The vcpu corrupts same set of host
pages, but the dirty page information isn't collected in the main
thread. This leads to infinite loop as the following log shows.
# ./dirty_log_test -M dirty-ring -c 65536 -m 5
Setting log mode to: 'dirty-ring'
Test iterations: 32, interval: 10 (ms)
Testing guest mode: PA-bits:40, VA-bits:48, 4K pages
guest physical test memory offset: 0xffbffe0000
vcpu stops because vcpu is kicked out...
Notifying vcpu to continue
vcpu continues now.
Iteration 1 collected 576 pages
<No more output afterwards>
Fix the issue by automatically choosing the best dirty ring size,
to ensure vcpu exit due to full dirty ring state. The option '-c'
becomes a hint to the dirty ring count, instead of the value of it.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-8-gshan@redhat.com
|
|
There are two states, which need to be cleared before next mode
is executed. Otherwise, we will hit failure as the following messages
indicate.
- The variable 'dirty_ring_vcpu_ring_full' shared by main and vcpu
thread. It's indicating if the vcpu exit due to full ring buffer.
The value can be carried from previous mode (VM_MODE_P40V48_4K) to
current one (VM_MODE_P40V48_64K) when VM_MODE_P40V48_16K isn't
supported.
- The current ring buffer index needs to be reset before next mode
(VM_MODE_P40V48_64K) is executed. Otherwise, the stale value is
carried from previous mode (VM_MODE_P40V48_4K).
# ./dirty_log_test -M dirty-ring
Setting log mode to: 'dirty-ring'
Test iterations: 32, interval: 10 (ms)
Testing guest mode: PA-bits:40, VA-bits:48, 4K pages
guest physical test memory offset: 0xffbfffc000
:
Dirtied 995328 pages
Total bits checked: dirty (1012434), clear (7114123), track_next (966700)
Testing guest mode: PA-bits:40, VA-bits:48, 64K pages
guest physical test memory offset: 0xffbffc0000
vcpu stops because vcpu is kicked out...
vcpu continues now.
Notifying vcpu to continue
Iteration 1 collected 0 pages
vcpu stops because dirty ring is full...
vcpu continues now.
vcpu stops because dirty ring is full...
vcpu continues now.
vcpu stops because dirty ring is full...
==== Test Assertion Failure ====
dirty_log_test.c:369: cleared == count
pid=10541 tid=10541 errno=22 - Invalid argument
1 0x0000000000403087: dirty_ring_collect_dirty_pages at dirty_log_test.c:369
2 0x0000000000402a0b: log_mode_collect_dirty_pages at dirty_log_test.c:492
3 (inlined by) run_test at dirty_log_test.c:795
4 (inlined by) run_test at dirty_log_test.c:705
5 0x0000000000403a37: for_each_guest_mode at guest_modes.c:100
6 0x0000000000401ccf: main at dirty_log_test.c:938
7 0x0000ffff9ecd279b: ?? ??:0
8 0x0000ffff9ecd286b: ?? ??:0
9 0x0000000000401def: _start at ??:?
Reset dirty pages (0) mismatch with collected (35566)
Fix the issues by clearing 'dirty_ring_vcpu_ring_full' and the ring
buffer index before next new mode is to be executed.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-7-gshan@redhat.com
|
|
In vcpu_map_dirty_ring(), the guest's page size is used to figure out
the offset in the virtual area. It works fine when we have same page
sizes on host and guest. However, it fails when the page sizes on host
and guest are different on arm64, like below error messages indicates.
# ./dirty_log_test -M dirty-ring -m 7
Setting log mode to: 'dirty-ring'
Test iterations: 32, interval: 10 (ms)
Testing guest mode: PA-bits:40, VA-bits:48, 64K pages
guest physical test memory offset: 0xffbffc0000
vcpu stops because vcpu is kicked out...
Notifying vcpu to continue
vcpu continues now.
==== Test Assertion Failure ====
lib/kvm_util.c:1477: addr == MAP_FAILED
pid=9000 tid=9000 errno=0 - Success
1 0x0000000000405f5b: vcpu_map_dirty_ring at kvm_util.c:1477
2 0x0000000000402ebb: dirty_ring_collect_dirty_pages at dirty_log_test.c:349
3 0x00000000004029b3: log_mode_collect_dirty_pages at dirty_log_test.c:478
4 (inlined by) run_test at dirty_log_test.c:778
5 (inlined by) run_test at dirty_log_test.c:691
6 0x0000000000403a57: for_each_guest_mode at guest_modes.c:105
7 0x0000000000401ccf: main at dirty_log_test.c:921
8 0x0000ffffb06ec79b: ?? ??:0
9 0x0000ffffb06ec86b: ?? ??:0
10 0x0000000000401def: _start at ??:?
Dirty ring mapped private
Fix the issue by using host's page size to map the ring buffer.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-6-gshan@redhat.com
|
|
Enable ring-based dirty memory tracking on ARM64:
- Enable CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL.
- Enable CONFIG_NEED_KVM_DIRTY_RING_WITH_BITMAP.
- Set KVM_DIRTY_LOG_PAGE_OFFSET for the ring buffer's physical page
offset.
- Add ARM64 specific kvm_arch_allow_write_without_running_vcpu() to
keep the site of saving vgic/its tables out of the no-running-vcpu
radar.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-5-gshan@redhat.com
|
|
ARM64 needs to dirty memory outside of a VCPU context when VGIC/ITS is
enabled. It's conflicting with that ring-based dirty page tracking always
requires a running VCPU context.
Introduce a new flavor of dirty ring that requires the use of both VCPU
dirty rings and a dirty bitmap. The expectation is that for non-VCPU
sources of dirty memory (such as the VGIC/ITS on arm64), KVM writes to
the dirty bitmap. Userspace should scan the dirty bitmap before migrating
the VM to the target.
Use an additional capability to advertise this behavior. The newly added
capability (KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP) can't be enabled before
KVM_CAP_DIRTY_LOG_RING_ACQ_REL on ARM64. In this way, the newly added
capability is treated as an extension of KVM_CAP_DIRTY_LOG_RING_ACQ_REL.
Suggested-by: Marc Zyngier <maz@kernel.org>
Suggested-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-4-gshan@redhat.com
|
|
Not all architectures like ARM64 need to override the function. Move
its declaration to kvm_dirty_ring.h to avoid the following compiling
warning on ARM64 when the feature is enabled.
arch/arm64/kvm/../../../virt/kvm/dirty_ring.c:14:12: \
warning: no previous prototype for 'kvm_cpu_dirty_log_size' \
[-Wmissing-prototypes] \
int __weak kvm_cpu_dirty_log_size(void)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-3-gshan@redhat.com
|
|
The VCPU isn't expected to be runnable when the dirty ring becomes soft
full, until the dirty pages are harvested and the dirty ring is reset
from userspace. So there is a check in each guest's entrace to see if
the dirty ring is soft full or not. The VCPU is stopped from running if
its dirty ring has been soft full. The similar check will be needed when
the feature is going to be supported on ARM64. As Marc Zyngier suggested,
a new event will avoid pointless overhead to check the size of the dirty
ring ('vcpu->kvm->dirty_ring_size') in each guest's entrance.
Add KVM_REQ_DIRTY_RING_SOFT_FULL. The event is raised when the dirty ring
becomes soft full in kvm_dirty_ring_push(). The event is only cleared in
the check, done in the newly added helper kvm_dirty_ring_check_request().
Since the VCPU is not runnable when the dirty ring becomes soft full, the
KVM_REQ_DIRTY_RING_SOFT_FULL event is always set to prevent the VCPU from
running until the dirty pages are harvested and the dirty ring is reset by
userspace.
kvm_dirty_ring_soft_full() becomes a private function with the newly added
helper kvm_dirty_ring_check_request(). The alignment for the various event
definitions in kvm_host.h is changed to tab character by the way. In order
to avoid using 'container_of()', the argument @ring is replaced by @vcpu
in kvm_dirty_ring_push().
Link: https://lore.kernel.org/kvmarm/87lerkwtm5.wl-maz@kernel.org
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-2-gshan@redhat.com
|
|
KVM/arm64 fixes for 6.1, take #3
- Fix the pKVM stage-1 walker erronously using the stage-2 accessor
- Correctly convert vcpu->kvm to a hyp pointer when generating
an exception in a nVHE+MTE configuration
- Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
- Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
- Document the boot requirements for FGT when entering the kernel
at EL1
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
virt/kvm/irqchip.c is including "irq.h" from the arch-specific KVM source
directory (i.e. not from arch/*/include) for the sole purpose of retrieving
irqchip_in_kernel.
Making the function inline in a header that is already included,
such as asm/kvm_host.h, is not possible because it needs to look at
struct kvm which is defined after asm/kvm_host.h is included. So add a
kvm_arch_irqchip_in_kernel non-inline function; irqchip_in_kernel() is
only performance critical on arm64 and x86, and the non-inline function
is enough on all other architectures.
irq.h can then be deleted from all architectures except x86.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Defer reprogramming counters and handling overflow via KVM_REQ_PMU
when incrementing counters. KVM skips emulated WRMSR in the VM-Exit
fastpath, the fastpath runs with IRQs disabled, skipping instructions
can increment and reprogram counters, reprogramming counters can
sleep, and sleeping is disallowed while IRQs are disabled.
[*] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
[*] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2981888, name: CPU 15/KVM
[*] preempt_count: 1, expected: 0
[*] RCU nest depth: 0, expected: 0
[*] INFO: lockdep is turned off.
[*] irq event stamp: 0
[*] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[*] hardirqs last disabled at (0): [<ffffffff8121222a>] copy_process+0x146a/0x62d0
[*] softirqs last enabled at (0): [<ffffffff81212269>] copy_process+0x14a9/0x62d0
[*] softirqs last disabled at (0): [<0000000000000000>] 0x0
[*] Preemption disabled at:
[*] [<ffffffffc2063fc1>] vcpu_enter_guest+0x1001/0x3dc0 [kvm]
[*] CPU: 17 PID: 2981888 Comm: CPU 15/KVM Kdump: 5.19.0-rc1-g239111db364c-dirty #2
[*] Call Trace:
[*] <TASK>
[*] dump_stack_lvl+0x6c/0x9b
[*] __might_resched.cold+0x22e/0x297
[*] __mutex_lock+0xc0/0x23b0
[*] perf_event_ctx_lock_nested+0x18f/0x340
[*] perf_event_pause+0x1a/0x110
[*] reprogram_counter+0x2af/0x1490 [kvm]
[*] kvm_pmu_trigger_event+0x429/0x950 [kvm]
[*] kvm_skip_emulated_instruction+0x48/0x90 [kvm]
[*] handle_fastpath_set_msr_irqoff+0x349/0x3b0 [kvm]
[*] vmx_vcpu_run+0x268e/0x3b80 [kvm_intel]
[*] vcpu_enter_guest+0x1d22/0x3dc0 [kvm]
Add a field to kvm_pmc to track the previous counter value in order
to defer overflow detection to kvm_pmu_handle_event() (the counter must
be paused before handling overflow, and that may increment the counter).
Opportunistically shrink sizeof(struct kvm_pmc) a bit.
Suggested-by: Wanpeng Li <wanpengli@tencent.com>
Fixes: 9cd803d496e7 ("KVM: x86: Update vPMCs when retiring instructions")
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20220831085328.45489-6-likexu@tencent.com
[sean: avoid re-triggering KVM_REQ_PMU on overflow, tweak changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220923001355.3741194-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Batch reprogramming PMU counters by setting KVM_REQ_PMU and thus
deferring reprogramming kvm_pmu_handle_event() to avoid reprogramming
a counter multiple times during a single VM-Exit.
Deferring programming will also allow KVM to fix a bug where immediately
reprogramming a counter can result in sleeping (taking a mutex) while
interrupts are disabled in the VM-Exit fastpath.
Introduce kvm_pmu_request_counter_reprogam() to make it obvious that
KVM is _requesting_ a reprogram and not actually doing the reprogram.
Opportunistically refine related comments to avoid misunderstandings.
Signed-off-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20220831085328.45489-5-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220923001355.3741194-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When reprogramming a counter, clear the counter's "reprogram pending" bit
if the counter is disabled (by the guest) or is disallowed (by the
userspace filter). In both cases, there's no need to re-attempt
programming on the next coincident KVM_REQ_PMU as enabling the counter by
either method will trigger reprogramming.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220923001355.3741194-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Force vCPUs to reprogram all counters on a PMU filter change to provide
a sane ABI for userspace. Use the existing KVM_REQ_PMU to do the
programming, and take advantage of the fact that the reprogram_pmi bitmap
fits in a u64 to set all bits in a single atomic update. Note, setting
the bitmap and making the request needs to be done _after_ the SRCU
synchronization to ensure that vCPUs will reprogram using the new filter.
KVM's current "lazy" approach is confusing and non-deterministic. It's
confusing because, from a developer perspective, the code is buggy as it
makes zero sense to let userspace modify the filter but then not actually
enforce the new filter. The lazy approach is non-deterministic because
KVM enforces the filter whenever a counter is reprogrammed, not just on
guest WRMSRs, i.e. a guest might gain/lose access to an event at random
times depending on what is going on in the host.
Note, the resulting behavior is still non-determinstic while the filter
is in flux. If userspace wants to guarantee deterministic behavior, all
vCPUs should be paused during the filter update.
Jim Mattson <jmattson@google.com>
Fixes: 66bb8a065f5a ("KVM: x86: PMU Event Filter")
Cc: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220923001355.3741194-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Extend the accounting sanity check in kvm_recover_nx_huge_pages() to the
TDP MMU, i.e. verify that zapping a shadow page unaccounts the disallowed
NX huge page regardless of the MMU type. Recovery runs while holding
mmu_lock for write and so it should be impossible to get false positives
on the WARN.
Suggested-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221019165618.927057-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Explicitly check if a NX huge page is disallowed when determining if a
page fault needs to be forced to use a smaller sized page. KVM currently
assumes that the NX huge page mitigation is the only scenario where KVM
will force a shadow page instead of a huge page, and so unnecessarily
keeps an existing shadow page instead of replacing it with a huge page.
Any scenario that causes KVM to zap leaf SPTEs may result in having a SP
that can be made huge without violating the NX huge page mitigation.
E.g. prior to commit 5ba7c4c6d1c7 ("KVM: x86/MMU: Zap non-leaf SPTEs when
disabling dirty logging"), KVM would keep shadow pages after disabling
dirty logging due to a live migration being canceled, resulting in
degraded performance due to running with 4kb pages instead of huge pages.
Although the dirty logging case is "fixed", that fix is coincidental,
i.e. is an implementation detail, and there are other scenarios where KVM
will zap leaf SPTEs. E.g. zapping leaf SPTEs in response to a host page
migration (mmu_notifier invalidation) to create a huge page would yield a
similar result; KVM would see the shadow-present non-leaf SPTE and assume
a huge page is disallowed.
Fixes: b8e8c8303ff2 ("kvm: mmu: ITLB_MULTIHIT mitigation")
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
[sean: use spte_to_child_sp(), massage changelog, fold into if-statement]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Message-Id: <20221019165618.927057-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a helper to convert a SPTE to its shadow page to deduplicate a
variety of flows and hopefully avoid future bugs, e.g. if KVM attempts to
get the shadow page for a SPTE without dropping high bits.
Opportunistically add a comment in mmu_free_root_page() documenting why
it treats the root HPA as a SPTE.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221019165618.927057-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Track the number of TDP MMU "shadow" pages instead of tracking the pages
themselves. With the NX huge page list manipulation moved out of the common
linking flow, elminating the list-based tracking means the happy path of
adding a shadow page doesn't need to acquire a spinlock and can instead
inc/dec an atomic.
Keep the tracking as the WARN during TDP MMU teardown on leaked shadow
pages is very, very useful for detecting KVM bugs.
Tracking the number of pages will also make it trivial to expose the
counter to userspace as a stat in the future, which may or may not be
desirable.
Note, the TDP MMU needs to use a separate counter (and stat if that ever
comes to be) from the existing n_used_mmu_pages. The TDP MMU doesn't bother
supporting the shrinker nor does it honor KVM_SET_NR_MMU_PAGES (because the
TDP MMU consumes so few pages relative to shadow paging), and including TDP
MMU pages in that counter would break both the shrinker and shadow MMUs,
e.g. if a VM is using nested TDP.
Cc: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Message-Id: <20221019165618.927057-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Set nx_huge_page_disallowed in TDP MMU shadow pages before making the SP
visible to other readers, i.e. before setting its SPTE. This will allow
KVM to query the flag when determining if a shadow page can be replaced
by a NX huge page without violating the rules of the mitigation.
Note, the shadow/legacy MMU holds mmu_lock for write, so it's impossible
for another CPU to see a shadow page without an up-to-date
nx_huge_page_disallowed, i.e. only the TDP MMU needs the complicated
dance.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Message-Id: <20221019165618.927057-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Account and track NX huge pages for nonpaging MMUs so that a future
enhancement to precisely check if a shadow page can't be replaced by a NX
huge page doesn't get false positives. Without correct tracking, KVM can
get stuck in a loop if an instruction is fetching and writing data on the
same huge page, e.g. KVM installs a small executable page on the fetch
fault, replaces it with an NX huge page on the write fault, and faults
again on the fetch.
Alternatively, and perhaps ideally, KVM would simply not enforce the
workaround for nonpaging MMUs. The guest has no page tables to abuse
and KVM is guaranteed to switch to a different MMU on CR0.PG being
toggled so there's no security or performance concerns. However, getting
make_spte() to play nice now and in the future is unnecessarily complex.
In the current code base, make_spte() can enforce the mitigation if TDP
is enabled or the MMU is indirect, but make_spte() may not always have a
vCPU/MMU to work with, e.g. if KVM were to support in-line huge page
promotion when disabling dirty logging.
Without a vCPU/MMU, KVM could either pass in the correct information
and/or derive it from the shadow page, but the former is ugly and the
latter subtly non-trivial due to the possibility of direct shadow pages
in indirect MMUs. Given that using shadow paging with an unpaged guest
is far from top priority _and_ has been subjected to the workaround since
its inception, keep it simple and just fix the accounting glitch.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20221019165618.927057-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename most of the variables/functions involved in the NX huge page
mitigation to provide consistency, e.g. lpage vs huge page, and NX huge
vs huge NX, and also to provide clarity, e.g. to make it obvious the flag
applies only to the NX huge page mitigation, not to any condition that
prevents creating a huge page.
Add a comment explaining what the newly named "possible_nx_huge_pages"
tracks.
Leave the nx_lpage_splits stat alone as the name is ABI and thus set in
stone.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20221019165618.927057-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Tag shadow pages that cannot be replaced with an NX huge page regardless
of whether or not zapping the page would allow KVM to immediately create
a huge page, e.g. because something else prevents creating a huge page.
I.e. track pages that are disallowed from being NX huge pages regardless
of whether or not the page could have been huge at the time of fault.
KVM currently tracks pages that were disallowed from being huge due to
the NX workaround if and only if the page could otherwise be huge. But
that fails to handled the scenario where whatever restriction prevented
KVM from installing a huge page goes away, e.g. if dirty logging is
disabled, the host mapping level changes, etc...
Failure to tag shadow pages appropriately could theoretically lead to
false negatives, e.g. if a fetch fault requests a small page and thus
isn't tracked, and a read/write fault later requests a huge page, KVM
will not reject the huge page as it should.
To avoid yet another flag, initialize the list_head and use list_empty()
to determine whether or not a page is on the list of NX huge pages that
should be recovered.
Note, the TDP MMU accounting is still flawed as fixing the TDP MMU is
more involved due to mmu_lock being held for read. This will be
addressed in a future commit.
Fixes: 5bcaf3e1715f ("KVM: x86/mmu: Account NX huge page disallowed iff huge page was requested")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221019165618.927057-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When using the flags in KVM_X86_SET_MSR_FILTER and
KVM_CAP_X86_USER_SPACE_MSR it is expected that an attempt to write to
any of the unused bits will fail. Add testing to walk over every bit
in each of the flag fields in MSR filtering and MSR exiting to verify
that unused bits return and error and used bits, i.e. valid bits,
succeed.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220921151525.904162-6-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add the mask KVM_MSR_FILTER_RANGE_VALID_MASK for the flags in the
struct kvm_msr_filter_range. This simplifies checks that validate
these flags, and makes it easier to introduce new flags in the future.
No functional change intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220921151525.904162-5-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add the mask KVM_MSR_FILTER_VALID_MASK for the flag in the struct
kvm_msr_filter. This makes it easier to introduce new flags in the
future.
No functional change intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220921151525.904162-4-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add the mask KVM_MSR_EXIT_REASON_VALID_MASK for the MSR exit reason
flags. This simplifies checks that validate these flags, and makes it
easier to introduce new flags in the future.
No functional change intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220921151525.904162-3-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Protect the kernel from using the flag KVM_MSR_FILTER_DEFAULT_ALLOW.
Its value is 0, and using it incorrectly could have unintended
consequences. E.g. prevent someone in the kernel from writing something
like this.
if (filter.flags & KVM_MSR_FILTER_DEFAULT_ALLOW)
<allow the MSR>
and getting confused when it doesn't work.
It would be more ideal to remove this flag altogether, but userspace
may already be using it, so protecting the kernel is all that can
reasonably be done at this point.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220921151525.904162-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Enable x86 slow page faults to be able to respond to non-fatal signals,
returning -EINTR properly when it happens.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221011195947.557281-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a new "interruptible" flag showing that the caller is willing to be
interrupted by signals during the __gfn_to_pfn_memslot() request. Wire it
up with a FOLL_INTERRUPTIBLE flag that we've just introduced.
This prepares KVM to be able to respond to SIGUSR1 (for QEMU that's the
SIGIPI) even during e.g. handling an userfaultfd page fault.
No functional change intended.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221011195809.557016-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a new pfn error to show that we've got a pending signal to handle
during hva_to_pfn_slow() procedure (of -EINTR retval).
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221011195809.557016-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We have had FAULT_FLAG_INTERRUPTIBLE but it was never applied to GUPs. One
issue with it is that not all GUP paths are able to handle signal delivers
besides SIGKILL.
That's not ideal for the GUP users who are actually able to handle these
cases, like KVM.
KVM uses GUP extensively on faulting guest pages, during which we've got
existing infrastructures to retry a page fault at a later time. Allowing
the GUP to be interrupted by generic signals can make KVM related threads
to be more responsive. For examples:
(1) SIGUSR1: which QEMU/KVM uses to deliver an inter-process IPI,
e.g. when the admin issues a vm_stop QMP command, SIGUSR1 can be
generated to kick the vcpus out of kernel context immediately,
(2) SIGINT: which can be used with interactive hypervisor users to stop a
virtual machine with Ctrl-C without any delays/hangs,
(3) SIGTRAP: which grants GDB capability even during page faults that are
stuck for a long time.
Normally hypervisor will be able to receive these signals properly, but not
if we're stuck in a GUP for a long time for whatever reason. It happens
easily with a stucked postcopy migration when e.g. a network temp failure
happens, then some vcpu threads can hang death waiting for the pages. With
the new FOLL_INTERRUPTIBLE, we can allow GUP users like KVM to selectively
enable the ability to trap these signals.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20221011195809.557016-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When #SMI is asserted, the CPU can be in interrupt shadow due to sti or
mov ss.
It is not mandatory in Intel/AMD prm to have the #SMI blocked during the
shadow, and on top of that, since neither SVM nor VMX has true support
for SMI window, waiting for one instruction would mean single stepping
the guest.
Instead, allow #SMI in this case, but both reset the interrupt window and
stash its value in SMRAM to restore it on exit from SMM.
This fixes rare failures seen mostly on windows guests on VMX, when #SMI
falls on the sti instruction which mainfest in VM entry failure due
to EFLAGS.IF not being set, but STI interrupt window still being set
in the VMCS.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221025124741.228045-24-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When the guest CPUID doesn't have support for long mode, 32 bit SMRAM
layout is used and it has no support for preserving EFER and/or SVM
state.
Note that this isn't relevant to running 32 bit guests on VM which is
long mode capable - such VM can still run 32 bit guests in compatibility
mode.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221025124741.228045-23-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use SMM structs in the SVM code as well, which removes the last user of
put_smstate/GET_SMSTATE so remove these macros as well.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221025124741.228045-22-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
if kvm_vcpu_map returns non zero value, error path should be triggered
regardless of the exact returned error value.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221025124741.228045-21-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use kvm_smram_state_64 struct to save/restore the 64 bit SMM state
(used when X86_FEATURE_LM is present in the guest CPUID,
regardless of 32-bitness of the guest).
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221025124741.228045-20-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
