summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-13selinux: fix non-MLS handling in mls_context_to_sid()Paul Moore
Commit 95ffe194204a ("selinux: refactor mls_context_to_sid() and make it stricter") inadvertently changed how we handle labels that did not contain MLS information. This patch restores the proper behavior in mls_context_to_sid() and adds a comment explaining the proper behavior to help ensure this doesn't happen again. Fixes: 95ffe194204a ("selinux: refactor mls_context_to_sid() and make it stricter") Reported-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-11-13drm/i915: add ICP support to cnp_rawclk() and kill icp_rawclk()Paulo Zanoni
I think I'm probably the one who argued in favor of having separate implementations for both PCHs, but the calculations are actually the same, the clocks are the same and the only difference is that on ICP we write the numerator to the register. I have previously suggested to kill cnp_rawclk() and keep the icp_rawclk() style, but Ville gave some good arguments that what's in this patch may be the better choice. v2: Switch numerator to 1 from 1000 and adjust calculations accordingly (Ville). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181112232313.26373-3-paulo.r.zanoni@intel.com
2018-11-13drm/i915: rename CNP_RAWCLK_FRAC to CNP_RAWCLK_DENPaulo Zanoni
Although CNP names this field "Counter Fraction", what we write to the register is really the denominator for the fractional part of the divider, not the fractional part (and the field description even says that). The ICP spec renamed the field to "Counter Fraction Denominator", which makes a lot more sense. Use the more complete ICL naming because we will merge the CNP and ICP functions into a single one, which will introduce the concept of the numerator. That will make a lot more sense when you read the "num/frac = den" calculation. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181112232313.26373-2-paulo.r.zanoni@intel.com
2018-11-13drm/i915/cnp+: update to the new RAWCLK_FREQ recommendationsPaulo Zanoni
BSpec was updated and now there's no more "subtract 1" to the Microsecond Counter Divider field. It seems this should help fixing some GMBUS issues. I'm not aware of any specific open bug that could be solved by this patch. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181112232313.26373-1-paulo.r.zanoni@intel.com
2018-11-13NFSv4: Fix an Oops during delegation callbacksTrond Myklebust
If the server sends a CB_GETATTR or a CB_RECALL while the filesystem is being unmounted, then we can Oops when releasing the inode in nfs4_callback_getattr() and nfs4_callback_recall(). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-11-13integrity: support new struct public_key_signature encoding fieldMimi Zohar
On systems with IMA-appraisal enabled with a policy requiring file signatures, the "good" signature values are stored on the filesystem as extended attributes (security.ima). Signature verification failure would normally be limited to just a particular file (eg. executable), but during boot signature verification failure could result in a system hang. Defining and requiring a new public_key_signature field requires all callers of asymmetric signature verification to be updated to reflect the change. This patch updates the integrity asymmetric_verify() caller. Fixes: 82f94f24475c ("KEYS: Provide software public key query function [ver #2]") Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Cc: David Howells <dhowells@redhat.com> Acked-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2018-11-13kdb: kdb_support: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comments with a proper "fall through" annotation, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2018-11-13kdb: kdb_keyboard: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comments with a proper "fall through" annotation, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2018-11-13kdb: kdb_main: refactor code in kdb_md_lineGustavo A. R. Silva
Replace the whole switch statement with a for loop. This makes the code clearer and easy to read. This also addresses the following Coverity warnings: Addresses-Coverity-ID: 115090 ("Missing break in switch") Addresses-Coverity-ID: 115091 ("Missing break in switch") Addresses-Coverity-ID: 114700 ("Missing break in switch") Suggested-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> [daniel.thompson@linaro.org: Tiny grammar change in description] Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2018-11-13kdb: Use strscpy with destination buffer sizePrarit Bhargava
gcc 8.1.0 warns with: kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’: kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=] strncpy(prefix_name, name, strlen(name)+1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/debug/kdb/kdb_support.c:239:31: note: length computed here Use strscpy() with the destination buffer size, and use ellipses when displaying truncated symbols. v2: Use strscpy() Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Jonathan Toppins <jtoppins@redhat.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: kgdb-bugreport@lists.sourceforge.net Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2018-11-13kdb: print real address of pointers instead of hashed addressesChristophe Leroy
Since commit ad67b74d2469 ("printk: hash addresses printed with %p"), all pointers printed with %p are printed with hashed addresses instead of real addresses in order to avoid leaking addresses in dmesg and syslog. But this applies to kdb too, with is unfortunate: Entering kdb (current=0x(ptrval), pid 329) due to Keyboard Entry kdb> ps 15 sleeping system daemon (state M) processes suppressed, use 'ps A' to see all. Task Addr Pid Parent [*] cpu State Thread Command 0x(ptrval) 329 328 1 0 R 0x(ptrval) *sh 0x(ptrval) 1 0 0 0 S 0x(ptrval) init 0x(ptrval) 3 2 0 0 D 0x(ptrval) rcu_gp 0x(ptrval) 4 2 0 0 D 0x(ptrval) rcu_par_gp 0x(ptrval) 5 2 0 0 D 0x(ptrval) kworker/0:0 0x(ptrval) 6 2 0 0 D 0x(ptrval) kworker/0:0H 0x(ptrval) 7 2 0 0 D 0x(ptrval) kworker/u2:0 0x(ptrval) 8 2 0 0 D 0x(ptrval) mm_percpu_wq 0x(ptrval) 10 2 0 0 D 0x(ptrval) rcu_preempt The whole purpose of kdb is to debug, and for debugging real addresses need to be known. In addition, data displayed by kdb doesn't go into dmesg. This patch replaces all %p by %px in kdb in order to display real addresses. Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Cc: <stable@vger.kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2018-11-13kdb: use correct pointer when 'btc' calls 'btt'Christophe Leroy
On a powerpc 8xx, 'btc' fails as follows: Entering kdb (current=0x(ptrval), pid 282) due to Keyboard Entry kdb> btc btc: cpu status: Currently on cpu 0 Available cpus: 0 kdb_getarea: Bad address 0x0 when booting the kernel with 'debug_boot_weak_hash', it fails as well Entering kdb (current=0xba99ad80, pid 284) due to Keyboard Entry kdb> btc btc: cpu status: Currently on cpu 0 Available cpus: 0 kdb_getarea: Bad address 0xba99ad80 On other platforms, Oopses have been observed too, see https://github.com/linuxppc/linux/issues/139 This is due to btc calling 'btt' with %p pointer as an argument. This patch replaces %p by %px to get the real pointer value as expected by 'btt' Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Cc: <stable@vger.kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2018-11-13mtd: spi_nor: pass DMA-able buffer to spi_nor_read_raw()Tudor.Ambarus@microchip.com
spi_nor_read_raw() calls nor->read() which might be implemented by the m25p80 driver. m25p80 uses the spi-mem layer which requires DMA-able in/out buffers. Pass kmalloc'ed dma buffer to spi_nor_read_raw(). Fixes: b038e8e3be72 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-11-13mtd: spi-nor: don't overwrite errno in spi_nor_get_map_in_use()Tudor.Ambarus@microchip.com
Don't overwrite the errno from spi_nor_read_raw(). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-11-13mtd: spi-nor: fix iteration over smpt arrayTudor.Ambarus@microchip.com
Iterate over smpt array using its starting address and length instead of the blind iterations that used data found in the array. This prevents possible memory accesses outside of the smpt array boundaries in case software, or manufacturers, misrepresent smpt array fields. Fixes: b038e8e3be72 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table") Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-11-13mtd: spi-nor: don't drop sfdp data if optional parsers failTudor.Ambarus@microchip.com
JESD216C states that just the Basic Flash Parameter Table is mandatory. Already defined (or future) additional parameter headers and tables are optional. Don't drop already collected sfdp data in case an optional table parser fails. In case of failing, each optional parser is responsible to roll back to the previously known spi_nor data. Fixes: b038e8e3be72 ("mtd: spi-nor: parse SFDP Sector Map Parameter Table") Reported-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-11-13Merge branch 'qed-Miscellaneous-bug-fixes'David S. Miller
Denis Bolotin says: ==================== qed: Miscellaneous bug fixes This patch series fixes several unrelated bugs across the driver. Please consider applying to net. V1->V2: ------- Use dma_rmb() instead of rmb(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13qed: Fix reading wrong value in loop conditionDenis Bolotin
The value of "sb_index" is written by the hardware. Reading its value and writing it to "index" must finish before checking the loop condition. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13qed: Fix rdma_info structure allocationMichal Kalderon
Certain flows need to access the rdma-info structure, for example dcbx update flows. In some cases there can be a race between the allocation or deallocation of the structure which was done in roce start / roce stop and an asynchrounous dcbx event that tries to access the structure. For this reason, we move the allocation of the rdma_info structure to be similar to the iscsi/fcoe info structures which are allocated during device setup. We add a new field of "active" to the struct to define whether roce has already been started or not, and this is checked instead of whether the pointer to the info structure. Fixes: 51ff17251c9c ("qed: Add support for RoCE hw init") Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13qed: Fix overriding offload_tc by protocols without APP TLVDenis Bolotin
The TC received from APP TLV is stored in offload_tc, and should not be set by protocols which did not receive an APP TLV. Fixed the condition when overriding the offload_tc. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13qed: Fix PTT leak in qed_drain()Denis Bolotin
Release PTT before entering error flow. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13Merge tag 'linux-can-fixes-for-4.20-20181109' of ↵David S. Miller
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-11-09 this is a pull request of 20 patches for net/master. First we have a patch by Oliver Hartkopp which changes the raw socket's raw_sendmsg() to return an error value if the user tries to send a CANFD frame to a CAN-2.0 device. The next two patches are by Jimmy Assarsson and fix potential problems in the kvaser_usb driver. YueHaibing's patches for the ucan driver fix a compile time warning and remove a duplicate include. Eugeniu Rosca patch adds more binding documentation to the rcar_can driver bindings. The next two patches are by Fabrizio Castro for the rcar_can driver and fixes a problem in the driver's probe function and document the r8a774a1 binding. Lukas Wunner's patch fixes a recpetion problem in hi311x driver by switching from edge to level triggered interruts. The next three patches all target the flexcan driver. Pankaj Bansal's patch unconditionally unlocks the last mailbox used for RX. Alexander Stein provides a better workaround for a hardware limitation when sending RTR frames, by using the last mailbox for TX, resulting in fewer lost frames. The patch by me simplyfies the driver, by making a runtime value a compile time constant. The following 4 patches are by me and provide the groundwork for the next patches by Oleksij Rempel. To avoid code duplication common code in the common CAN driver infrastructure is factured out and error handling is cleaned up. The next 4 patches are by Oleksij Rempel and fix the problem in the flexcan driver that other processes see TX frames arrive out of order with ragards to a RX'ed frame (which are send by a different system on the CAN bus as the result of our TX frame). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13selinux: check length properly in SCTP bind hookOndrej Mosnacek
selinux_sctp_bind_connect() must verify if the address buffer has sufficient length before accessing the 'sa_family' field. See __sctp_connect() for a similar check. The length of the whole address ('len') is already checked in the callees. Reported-by: Qian Cai <cai@gmx.us> Fixes: d452930fd3b9 ("selinux: Add SCTP support") Cc: <stable@vger.kernel.org> # 4.17+ Cc: Richard Haines <richard_c_haines@btinternet.com> Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Tested-by: Qian Cai <cai@gmx.us> Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-11-13drm/amdgpu: fix huge page handling on Vega10Christian König
We accidentially set the huge flag on the parent instead of the childs. This caused some VM faults under memory pressure. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-11-13drm/amd/pp: Fix truncated clock value when set watermarkRex Zhu
the clk value should be tranferred to MHz first and then transfer to uint16. otherwise, the clock value will be truncated. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-11-13drm/i915: Determine DSI panel orientation from VBTVille Syrjälä
VBT appears to have two (or possibly three) ways to indicate the panel rotation. The first is in the MIPI config block, but that apparenly usually (maybe always?) indicates 0 degrees despite the actual panel orientation. The second way to indicate this is in the general features block, which can just indicate whether 180 degress rotation is used. The third might be a separate rotation data block, but that is not at all documented so who knows what it may contain. Let's try the first two. We first try the DSI specicic VBT information, and it it doesn't look trustworthy (ie. indicates 0 degrees) we fall back to the 180 degree thing. Just to avoid too many changes in one go we shall also keep the hardware readout path for now. If this works for more than just my VLV FFRD the question becomes how many of the panel orientation quirks are now redundant? v2: Move the code into intel_dsi.c (Jani) Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181022142015.4026-1-ville.syrjala@linux.intel.com Tested-by: Hans de Goede <hdegoede@redhat.com>
2018-11-13drm/i915: Fix the VLV/CHV DSI panel orientation hw readoutVille Syrjälä
Let's make sure the DSI port is actually on before we go poking at the plane register to determine which way it's rotated. Otherwise we could be looking at a plane that is feeding a HDMI port for instance. And in order to read the plane register we need the power well to be on. Make sure that is indeed the case. We'll also make sure the plane is actually enabled before we trust the rotation bit to tell us the truth. v2: s/intel_dsi/vlv_dsi/ Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181022141953.3889-1-ville.syrjala@linux.intel.com Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
2018-11-13drm/i915: Move skip_intermediate_wm handling into ilk_compute_intermediate_wm()Ville Syrjälä
No point in cluttering the common codepaths with the skip_intermediate_wm handling. Just move it into ilk_compute_intermediate_wm() as those are the only platforms using this. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108151013.24064-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
2018-11-13drm/i915: Account for scale factor when calculating initial phaseVille Syrjälä
To get the initial phase correct we need to account for the scale factor as well. I forgot this initially and was mostly looking at heavily upscaled content where the minor difference between -0.5 and the proper initial phase was not readily apparent. And let's toss in a comment that tries to explain the formula a little bit. v2: The initial phase upper limit is 1.5, not 24.0! Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 0a59952b24e2 ("drm/i915: Configure SKL+ scaler initial phase correctly") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181029181820.21956-1-ville.syrjala@linux.intel.com Tested-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
2018-11-13drm/i915: Always write both TILEOFF and LINOFF plane registersVille Syrjälä
Reduce the clutter in the sprite update functions by writing both TILEOFF and LINOFF registers unconditionally. We already did this for primary planes so might as well do it for the sprites too. There is no harm in writing both registers. Which one gets used depends on the tilimg mode selected in the plane control registers. It might even make sense to clear the register that won't get used. That could make register dumps a little easier to parse. But I'm not sure it's worth the extra hassle. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108150955.23948-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
2018-11-13drm/amdgpu: fix bug with IH ring setupPhilip Yang
The bug limits the IH ring wptr address to 40bit. When the system memory is bigger than 1TB, the bus address is more than 40bit, this causes the interrupt cannot be handled and cleared correctly. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-13Revert "ACPI/PCI: Pay attention to device-specific _PXM node values"Bjorn Helgaas
This reverts commit bad7dcd94f3956bcfc0a69ef71fdf0fcca3de4a8. bad7dcd94f39 ("ACPI/PCI: Pay attention to device-specific _PXM node values") caused boot failures (no console output at all) for Martin [1] and Ingo [2] on AMD ThreadRipper systems. Revert the commit until we figure out how to safely use these device-specific _PXM values. [1] https://lore.kernel.org/linux-pci/20180912152140.3676-2-Jonathan.Cameron@huawei.com [2] https://lore.kernel.org/linux-pci/20181113071712.GA2353@gmail.com Fixes: bad7dcd94f39 ("ACPI/PCI: Pay attention to device-specific _PXM node values") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-11-13drm/i915: Switch LSPCON to PCON mode if it's in LS modeVille Syrjälä
We no longer change LSPCON into PCON mode if it boots up in LS mode. This was broken by some code shuffling in commit 96e35598cead ("drm/i915: Check LSPCON vendor OUI"). I actually can't see a reason why that code shuffling had to be done. The commit msg notes it but doesn't justify it in any way. But I guess we'll keep the code in its current place anyway and just make the "switch to PCON mode" part effective once again. Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Tested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Fixes: 96e35598cead ("drm/i915: Check LSPCON vendor OUI") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107171821.27862-1-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
2018-11-13drm/meson: Add primary plane scalingNeil Armstrong
This patch adds support for the Primary Plane scaling. On the Amlogic GX SoCs, the primary plane is used as On-Screen-Display layer on top of video, and it's needed to keep the OSD layer to a lower size as the physical display size to : - lower the memory bandwidth - lower the OSD rendering - lower the memory usage This use-case is used when setting the display mode to 3840x2160 and the OSD layer is rendered using the GPU. In this case, the GXBB & GXL cannot work on more than 2000x2000 buffer, thus needing the OSD layer to be kept at 1920x1080 and upscaled to 3840x2160 in hardware. The primary plane atomic check still allow 1:1 scaling, allowing native 3840x2160 if needed by user-space applications. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [narmstrong: fixed apply from malformed patch] Link: https://patchwork.freedesktop.org/patch/msgid/1541497202-20570-4-git-send-email-narmstrong@baylibre.com
2018-11-13drm/meson: move OSD scaler management into plane atomic updateNeil Armstrong
In preparation to support the Primary Plane scaling, move the basic OSD Interlace-Only scaler setup code into the primary plane atomic update callback and handle the vsync scaler update like the overlay plane scaling registers update. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1541497202-20570-3-git-send-email-narmstrong@baylibre.com
2018-11-13drm/meson: Support Overlay plane for video renderingNeil Armstrong
The Amlogic Meson GX SoCs support an Overlay plane behind the primary plane for video rendering. This Overlay plane support various YUV layouts : - YUYV - NV12 / NV21 - YUV444 / 422 / 420 / 411 / 410 The scaler supports a wide range of scaling ratios, but for simplicity, plane atomic check limits the scaling from x5 to /5 in vertical and horizontal scaling. The z-order is fixed and always behind the primary plane and cannot be changed. The scaling parameter algorithm was taken from the Amlogic vendor kernel code and rewritten to match the atomic universal plane requirements. The video rendering using this overlay plane support has been tested using the new Kodi DRM-KMS Prime rendering path along the in-review V4L2 Mem2Mem Hardware Video Decoder up to 3840x2160 NV12 frames on various display modes. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Maxime Jourdan <mjourdan@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1541497202-20570-2-git-send-email-narmstrong@baylibre.com
2018-11-13drm/sti: remove set but not used variable 'priv'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/sti/sti_crtc.c: In function 'sti_crtc_vblank_cb': drivers/gpu/drm/sti/sti_crtc.c:255:22: warning: variable 'priv' set but not used [-Wunused-but-set-variable] It never used since introduction in commit 9e1f05b28009 ("drm/sti: rename files and functions") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1541818660-37168-1-git-send-email-yuehaibing@huawei.com
2018-11-13drm/meson: Use optional canvas providerMaxime Jourdan
This is the first step into converting the meson/drm driver to use the canvas module. If a canvas provider node is detected in DT, use it. Otherwise, fall back to what is currently being done. Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: added back priv in meson_drv_unbind()] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181105104508.23090-3-mjourdan@baylibre.com
2018-11-13dt-bindings: display: amlogic, meson-vpu: Add optional canvas provider nodeMaxime Jourdan
Allows using the new canvas provider module if present. Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181105104508.23090-2-mjourdan@baylibre.com
2018-11-13Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst
drm-next is forwarded to v4.20-rc1, and we need this to make a patch series apply. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-11-13drm/meson: venc: dmt mode must use encpJorge Ramirez-Ortiz
The video mode for DMT is only populated to support encp. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1542048069-22603-1-git-send-email-jramirez@baylibre.com
2018-11-13opp: ti-opp-supply: Correct the supply in _get_optimal_vdd_voltage callKeerthy
_get_optimal_vdd_voltage call provides new_supply_vbb->u_volt as the reference voltage while it should be really new_supply_vdd->u_volt. Cc: 4.16+ <stable@vger.kernel.org> # v4.16+ Fixes: 9a835fa6e47 ("PM / OPP: Add ti-opp-supply driver") Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-11-13opp: ti-opp-supply: Dynamically update u_volt_minKeerthy
The voltage range (min, max) provided in the device tree is from the data manual and is pretty big, catering to a wide range of devices. On a i2c read/write failure the regulator_set_voltage_triplet function falls back to set voltage between min and max. The min value from Device Tree can be lesser than the optimal value and in that case that can lead to a hang or crash. Hence set the u_volt_min dynamically to the optimal voltage value. Cc: 4.16+ <stable@vger.kernel.org> # v4.16+ Fixes: 9a835fa6e47 ("PM / OPP: Add ti-opp-supply driver") Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2018-11-12RISC-V: Silence some module warnings on 32-bitOlof Johansson
Fixes: arch/riscv/kernel/module.c: In function 'apply_r_riscv_32_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:23:27: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_pcrel_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:104:23: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:146:23: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_got_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:190:60: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_plt_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:214:24: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:236:23: note: format string is defined here Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-12RISC-V: lib: Fix build error for 64-bitOlof Johansson
Fixes the following build error from tinyconfig: riscv64-unknown-linux-gnu-ld: kernel/sched/fair.o: in function `.L8': fair.c:(.text+0x70): undefined reference to `__lshrti3' riscv64-unknown-linux-gnu-ld: kernel/time/clocksource.o: in function `.L0 ': clocksource.c:(.text+0x334): undefined reference to `__lshrti3' Fixes: 7f47c73b355f ("RISC-V: Build tishift only on 64-bit") Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-12riscv: add missing vdso_install targetDavid Abdurachmanov
Building kernel 4.20 for Fedora as RPM fails, because riscv is missing vdso_install target in arch/riscv/Makefile. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-12riscv: fix spacing in struct pt_regsDavid Abdurachmanov
Replace 8 spaces with tab to match styling. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-12RISC-V: defconfig: Enable printk timestampsAnup Patel
The printk timestamps are very useful information to visually see where kernel is spending time during boot. It also helps us see the timing of hotplug events at runtime. This patch enables printk timestamps in RISC-V defconfig so that we have it enabled by default (similar to other architectures such as x86_64, arm64, etc). Signed-off-by: Anup Patel <anup@brainfault.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-12SUNRPC: Fix a bogus get/put in generic_key_to_expire()Trond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-11-12SUNRPC: Fix a Oops when destroying the RPCSEC_GSS credential cacheTrond Myklebust
Commit 07d02a67b7fa causes a use-after free in the RPCSEC_GSS credential destroy code, because the call to get_rpccred() in gss_destroying_context() will now always fail to increment the refcount. While we could just replace the get_rpccred() with a refcount_set(), that would have the unfortunate consequence of resurrecting a credential in the credential cache for which we are in the process of destroying the RPCSEC_GSS context. Rather than do this, we choose to make a copy that is never added to the cache and use that to destroy the context. Fixes: 07d02a67b7fa ("SUNRPC: Simplify lookup code") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
generated by cgit (git 2.34.1) at 2025-09-13 06:11:25 +0000